d851ecd373
The CTF file format has always supported "external strtabs", which internally are strtab offsets with their MSB on: such refs get their strings from the strtab passed in at CTF file open time: this is usually intended to be the ELF strtab, and that's what this implementation is meant to support, though in theory the external strtab could come from anywhere. This commit adds support for these external strings in the ctf-string.c strtab tracking layer. It's quite easy: we just add a field csa_offset to the atoms table that tracks all strings: this field tracks the offset of the string in the ELF strtab (with its MSB already on, courtesy of a new macro CTF_SET_STID), and adds a new function that sets the csa_offset to the specified offset (plus MSB). Then we just need to avoid writing out strings to the internal strtab if they have csa_offset set, and note that the internal strtab is shorter than it might otherwise be. (We could in theory save a little more time here by eschewing sorting such strings, since we never actually write the strings out anywhere, but that would mean storing them separately and it's just not worth the complexity cost until profiling shows it's worth doing.) We also have to go through a bit of extra effort at variable-sorting time. This was previously using direct references to the internal strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab is not yet ready to put in its usual field (in a ctf_file_t that hasn't even been allocated yet at this stage): but now we're using the external strtab, this will no longer do because it'll be looking things up in the wrong strtab, with disastrous results. Instead, pass the new internal strtab in to a new ctf_strraw_explicit function which is just like ctf_strraw except you can specify a ne winternal strtab to use. But even now that it is using a new internal strtab, this is not quite enough: it can't look up strings in the external strtab because ld hasn't written it out yet, and when it does will write it straight to disk. Instead, when we write the internal strtab, note all the offset -> string mappings that we have noted belong in the *external* strtab to a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look in there at ctf_strraw time if it is set. This uses minimal extra memory (because only strings in the external strtab that we actually use are stored, and even those come straight out of the atoms table), but let both variable sorting and name interning when ctf_bufopen is next called work fine. (This also means that we don't need to filter out spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to the caller, once we wrap ctf_bufopen so that we have a new internal variant of ctf_bufopen etc that we can pass the synthetic external strtab to. That error has been filtered out since the days of Solaris libctf, which didn't try to handle the problem of getting external strtabs right at construction time at all.) v3: add the synthetic strtab and all associated machinery. v5: fix tabdamage. include/ * ctf.h (CTF_SET_STID): New. libctf/ * ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field. (ctf_file_t) <ctf_syn_ext_strtab>: Likewise. (ctf_str_add_ref): Name the last arg. (ctf_str_add_external) New. (ctf_str_add_strraw_explicit): Likewise. (ctf_simple_open_internal): Likewise. (ctf_bufopen_internal): Likewise. * ctf-string.c (ctf_strraw_explicit): Split from... (ctf_strraw): ... here, with new support for ctf_syn_ext_strtab. (ctf_str_add_ref_internal): Return the atom, not the string. (ctf_str_add): Adjust accordingly. (ctf_str_add_ref): Likewise. Move up in the file. (ctf_str_add_external): New: update the csa_offset. (ctf_str_count_strtab): Only account for strings with no csa_offset in the internal strtab length. (ctf_str_write_strtab): If the csa_offset is set, update the string's refs without writing the string out, and update the ctf_syn_ext_strtab. Make OOM handling less ugly. * ctf-create.c (struct ctf_sort_var_arg_cb): New. (ctf_update): Handle failure to populate the strtab. Pass in the new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition. Call ctf_simple_open_internal, not ctf_simple_open. (ctf_sort_var): Call ctf_strraw_explicit rather than looking up strings by hand. * ctf-hash.c (ctf_hash_insert_type): Likewise (but using ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless. * ctf-open.c (init_types): No longer filter out ECTF_STRTAB. (ctf_file_close): Destroy the ctf_syn_ext_strtab. (ctf_simple_open): Rename to, and reimplement as a wrapper around... (ctf_simple_open_internal): ... this new function, which calls ctf_bufopen_internal. (ctf_bufopen): Rename to, and reimplement as a wrapper around... (ctf_bufopen_internal): ... this new function, which sets ctf_syn_ext_strtab. |
||
|---|---|---|
| bfd | ||
| binutils | ||
| config | ||
| contrib | ||
| cpu | ||
| elfcpp | ||
| etc | ||
| gas | ||
| gdb | ||
| gnulib | ||
| gold | ||
| gprof | ||
| include | ||
| intl | ||
| ld | ||
| libctf | ||
| libdecnumber | ||
| libiberty | ||
| opcodes | ||
| readline | ||
| sim | ||
| texinfo | ||
| zlib | ||
| .cvsignore | ||
| .gitattributes | ||
| .gitignore | ||
| COPYING | ||
| COPYING.LIB | ||
| COPYING.LIBGLOSS | ||
| COPYING.NEWLIB | ||
| COPYING3 | ||
| COPYING3.LIB | ||
| ChangeLog | ||
| MAINTAINERS | ||
| Makefile.def | ||
| Makefile.in | ||
| Makefile.tpl | ||
| README | ||
| README-maintainer-mode | ||
| ar-lib | ||
| compile | ||
| config-ml.in | ||
| config.guess | ||
| config.rpath | ||
| config.sub | ||
| configure | ||
| configure.ac | ||
| depcomp | ||
| djunpack.bat | ||
| install-sh | ||
| libtool.m4 | ||
| ltgcc.m4 | ||
| ltmain.sh | ||
| ltoptions.m4 | ||
| ltsugar.m4 | ||
| ltversion.m4 | ||
| lt~obsolete.m4 | ||
| makefile.vms | ||
| missing | ||
| mkdep | ||
| mkinstalldirs | ||
| move-if-change | ||
| multilib.am | ||
| setup.com | ||
| src-release.sh | ||
| symlink-tree | ||
| test-driver | ||
| ylwrap | ||
README
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.