OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
eb2346970a
binutils-gdb/sim/mips/ChangeLog
Frank Ch. Eigler 08f758df94 * resolution of eCos-vs.-sky merge conflict! 
[ChangeLog]
1998-12-30  Frank Ch. Eigler  <fche@cygnus.com>
	* mips.igen (BREAK): Call signal_exception instead of sim_engine_halt.
start-sanitize-sky
	* interp.c (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook.
 	Call sim_engine_halt on BreakPoint.
end-sanitize-sky
[ChangeLog.sky]
1998-12-30  Frank Ch. Eigler  <fche@cygnus.com>
	* sky-gdb.c (sky_sim_engine_halt): Do not set CIA here.
1998-12-30 21:16:14 +00:00

2854 lines
94 KiB
Plaintext
Raw Blame History

1998-12-30 Frank Ch. Eigler <fche@cygnus.com>
* mips.igen (BREAK): Call signal_exception instead of sim_engine_halt.
start-sanitize-sky
* interp.c (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook.
Call sim_engine_halt on BreakPoint.
end-sanitize-sky
Tue Dec 29 16:03:53 1998 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
* configure.in, configure (mips64vr5*-*-*): Added missing ;; in
case statement.
1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (sim_open): Allocate jm3904 memory in smaller chunks.
(load_word): Call SIM_CORE_SIGNAL hook on error.
(signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook before
starting. For exception dispatching, pass PC instead of NULL_CIA.
(decode_coproc): Use COP0_BADVADDR to store faulting address.
* sim-main.h (COP0_BADVADDR): Define.
(SIM_CORE_SIGNAL): Define hook to call mips_core_signal.
(SIM_CPU_EXCEPTION*): Define hooks to call mips_cpu_exception*().
(_sim_cpu): Add exc_* fields to store register value snapshots.
* mips.igen (*): Replace memory-related SignalException* calls
with references to SIM_CORE_SIGNAL hook.
* dv-tx3904irc.c (tx3904irc_port_event): printf format warning
fix.
* sim-main.c (*): Minor warning cleanups.
1998-12-24 Gavin Romig-Koch <gavin@cygnus.com>
* m16.igen (DADDIU5): Correct type-o.
Mon Dec 21 10:34:48 1998 Andrew Cagney <cagney@chook>
* mips.igen (do_ddiv, do_ddivu): Pacify GCC. Update hi/lo via tmp
variables.
start-sanitize-vr4xxx
1998-12-17 Gavin Romig-Koch <gavin@cygnus.com>
* vr4run.c (sim_engine_run): Enable the 4111.
end-sanitize-vr4xxx
Wed Dec 16 18:20:28 1998 Andrew Cagney <cagney@chook>
* Makefile.in (SIM_EXTRA_CFLAGS): No longer need to add .../newlib
to include path.
(interp.o): Add dependency on itable.h
(oengine.c, gencode): Delete remaining references.
(BUILT_SRC_FROM_GEN): Clean up.
start-sanitize-vr4xxx
(SIM_HACK_ALL): Define.
(hack, libhack.a): Do not build.
end-sanitize-vr4xxx
1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
* vr4run.c: New.
* Makefile.in (SIM_HACK_OBJ,HACK_OBJS,HACK_GEN_SRCS,libhack.a,
tmp-hack,tmp-m32-hack,tmp-m16-hack,tmp-itable-hack,
tmp-run-hack) : New.
* configure.in (mips64vr4xxx): Switch to using the HACK
generator. Set TARGET_ENABLE_FR.
* m16.igen (LD,DADDIU,DADDUI5,DADJSP,DADDIUSP,DADDI,DADDU,DSUBU,
DSLL,DSRL,DSRA,DSLLV,DSRAV,DMULT,DMULTU,DDIV,DDIVU,JALX32,JALX):
Drop the "64" qualifier to get the HACK generator working.
Use IMMEDIATE rather than IMMED. Use SHAMT rather than SHIFT.
Add vr4121 where necessary.
* mips.igen (do_daddiu,do_ddiv,do_divu): Remove the 64-only
qualifier to get the hack generator working.
(do_dsll,do_dsllv,do_dsra,do_dsrl,do_dsrlv): New.
(DSLL): Use do_dsll.
(DSLLV): Use do_dsllv.
(DSRA): Use do_dsra.
(DSRL): Use do_dsrl.
(DSRLV): Use do_dsrlv.
(BC1): Move *vr4100,*vr4111, and *vr4121 to get the HACK
generator working.
(CxC1, DMxC1, MxC1,MACCU,MACCHI,MACCHIU): Rename to
get the HACK generator working.
* vr.igen: Add *vr4320 where missing.
(MACC) Rename to get the HACK generator working.
(DMACC,MACCS,DMACCS): Add the 64.
start-sanitize-vr4320
1998-12-14 Gavin Romig-Koch <gavin@cygnus.com>
* vr.igen (Low32Bits): Add vr4320.
end-sanitize-vr4320
1998-12-14 Gavin Romig-Koch <gavin@cygnus.com>
* configure.in: Add support for 5xxx and "el".
* configure: Rebuild.
start-sanitize-vr4xxx
1998-12-13 Gavin Romig-Koch <gavin@cygnus.com>
* configure.in,mips.igen,vr.igen: Add vr4121.
* configure: Rebuilt.
end-sanitize-vr4xxx
1998-12-12 Gavin Romig-Koch <gavin@cygnus.com>
start-sanitize-vr4xxx
* configure.in (mips64vr4xxx): Enable TARGET_ENABLE_FR.
Set mips_fpu, and mips_fpu_bitsize.
Set sim_gen, and sim_igen_machine.
* configure: Rebuild.
end-sanitize-vr4xxx
* mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts.
* sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR.
1998-12-11 Gavin Romig-Koch <gavin@cygnus.com>
* mips/interp.c (DEBUG): Cleanups.
1998-12-10 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes.
(tx3904sio_tickle): fflush after a stdout character output.
1998-12-03 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (sim_close): Uninstall modules.
start-sanitize-sky
Tue Dec 1 18:40:30 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sky-libvpe.c (FCmp): Abort when no result.
end-sanitize-sky
Wed Nov 25 13:41:03 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h, interp.c (sim_monitor): Change to global
function.
Wed Nov 25 17:33:24 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (vr4100): Only include vr4100 instructions in
simulator.
* configure: Re-generate.
* m16.igen (*): Tag all mips16 instructions as also being vr4100.
Mon Nov 23 18:20:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_CFLAGS): Do not define WITH_IGEN.
* sim-main.h, sim-main.c, interp.c: Delete #if WITH_IGEN keeping
true alternative.
* configure.in (sim_default_gen, sim_use_gen): Replace with
sim_gen.
(--enable-sim-igen): Delete config option. Always using IGEN.
* configure: Re-generate.
* Makefile.in (gencode): Kill, kill, kill.
* gencode.c: Ditto.
Mon Nov 23 18:07:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in: Configure mips64vr4100-elf nee mips64vr41* as a 64
bit mips16 igen simulator.
* configure: Re-generate.
* mips.igen (check_div_hilo, check_mult_hilo, check_mf_hilo): Mark
as part of vr4100 ISA.
* vr.igen: Mark all instructions as 64 bit only.
Mon Nov 23 17:07:37 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (get_cell, sim_monitor, fetch_str, CoProcPresent):
Pacify GCC.
start-sanitize-tx19
Mon Nov 23 16:51:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (tx19): Reconize target mips-tx19-elf.
* configure: Re-generate.
end-sanitize-tx19
Mon Nov 23 13:23:40 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in: Configure mips-lsi-elf nee mips*lsi* as a
mipsIII/mips16 igen simulator. Fix sim_gen VS sim_igen typos.
* configure: Re-generate.
* m16.igen (BREAK): Define breakpoint instruction.
(JALX32): Mark instruction as mips16 and not r3900.
* mips.igen (C.cond.fmt): Fix typo in instruction format.
* sim-main.h (PENDING_FILL): Wrap C statements in do/while.
start-sanitize-r5900
Mon Nov 16 11:44:24 1998 Andrew Cagney <cagney@b1.cygnus.com>
* r5900.igen (CVT.W.S): Always round towards zero.
end-sanitize-r5900
Sat Nov 7 09:54:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_instruction - BREAK): For MIPS16, handle BREAK
insn as a debug breakpoint.
* sim-main.h (PENDING_SLOT_BIT): Fix, was incorrectly defined as
pending.slot_size.
(PENDING_SCHED): Clean up trace statement.
(PENDING_SCHED): Increment PENDING_IN and PENDING_TOTAL.
(PENDING_FILL): Delay write by only one cycle.
(PENDING_FILL): For FSRs, write fmt_uninterpreted to FPR_STATE.
* sim-main.c (pending_tick): Clean up trace statements. Add trace
of pending writes.
(pending_tick): Fix sizes in switch statements, 4 & 8 instead of
32 & 64.
(pending_tick): Move incrementing of index to FOR statement.
(pending_tick): Only update PENDING_OUT after a write has occured.
* configure.in: Add explicit mips-lsi-* target. Use gencode to
build simulator.
* configure: Re-generate.
* interp.c (sim_engine_run OLD): Delete explicit call to
PENDING_TICK. Now called via ENGINE_ISSUE_PREFIX_HOOK.
start-sanitize-r5900
Wed Nov 11 16:53:57 1998 Andrew Cagney <cagney@b1.cygnus.com>
* r5900.igen (RSQRT): Set both I/SI and D/SD when div-0.
Thu Nov 5 10:29:42 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (r59fp_opdiv): Correct erroneous FGR[FD] reference.
Thu Nov 5 19:40:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
* r5900.igen (DIV): Do not clear clear SO/SU when already set.
* r5900.igen (RSQRT.S): Do not compute 1/srqt(abs(T)) when T
negative, compute S/sqrt(abs(T)) instead. Correctly set FCSR
bits.
* r5900.igen (RSQRT.S): Handle overflow/underflow better. Check
sign of FT not FS.
(r59fp_store): Clarify "bad value" abort messages.
end-sanitize-r5900
Sat Oct 30 09:49:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904cpu.c (deliver_tx3904cpu_interrupt): Add dummy
interrupt level number to match changed SignalExceptionInterrupt
macro.
start-sanitize-sky
Thu Oct 29 12:47:46 1998 Frank Ch. Eigler <fche@cygnus.com>
* sim-main.c (tlb_try_match): Include physical address in
scratchpad non-mapping warning.
end-sanitize-sky
start-sanitize-r5900
Thu Oct 29 11:06:30 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen: Fix PSRLVW, MULTU1, PADSBH instructions,
as per customer patch.
end-sanitize-r5900
Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
* interp.c: #include "itable.h" if WITH_IGEN.
(get_insn_name): New function.
(sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
* sim-main.h (MAX_INSNS,INSN_NAME): Delete.
start-sanitize-sky
Tue Sep 22 10:35:37 1998 Frank Ch. Eigler <fche@cygnus.com>
* sim-main.c (tlb_try_match): Specially match virtual
pages mapped to scratchpad RAM, an unimplemented feature.
end-sanitize-sky
start-sanitize-r5900
Fri Sep 18 11:31:16 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (prot3w): Correct rotation sequence; patch
from customer.
end-sanitize-r5900
Mon Sep 14 12:36:44 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure: Rebuilt to inhale new common/aclocal.m4.
start-sanitize-r5900
Thu Sep 10 11:50:54 1998 Doug Evans <devans@canuck.cygnus.com>
* r5900.igen (plzcw): Make `i' signed.
Wed Sep 9 15:02:10 1998 Doug Evans <devans@canuck.cygnus.com>
* sim-main.h (COP0_COUNT,COP0_COMPARE,status_IM7): New macros.
* sky-engine.c (cpu_issue): Increment COP0_COUNT and signal an
interrupt if == COP0_COMPARE and interrupt masks/enables allow it.
* interp.c (signal_exception, sky version): Handle INT 2.
Wed Sep 9 11:28:20 1998 Ron Unrau <runrau@cygnus.com>
* sim-main.h: track COP0 registers
* interp.c (sim_{fetch,store}_register): read/write COP0 registers
Fri Sep 4 10:37:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (mtsab): Correct typo in input register.
* sim-main.h (TMP_*): New macros for accessing local 128-bit
temporary for multimedia instructions.
* r5900.igen (*): Convert most instructions to use new TMP
macros to store output result during computation.
end-sanitize-r5900
Tue Sep 1 15:39:18 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c: Include sim-assert.h.
Tue Aug 25 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c: New file: tx3904 serial I/O module.
* configure.in: Add dv-tx3904sio, dv-sockser for tx39 target.
Reorganize target-specific sim-hardware checks.
* configure: rebuilt.
* interp.c (sim_open): For tx39 target boards, set
OPERATING_ENVIRONMENT, add tx3904sio devices.
* tconfig.in: For tx39 target, set SIM_HANDLES_LMA for loading
ROM executables. Install dv-sockser into sim-modules list.
* dv-tx3904irc.c: Compiler warning clean-up.
* dv-tx3904tmr.c: Compiler warning clean-up. Remove particularly
frequent hw-trace messages.
start-sanitize-sky
Tue Aug 11 13:52:16 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (signal_exception): Set IP3 bit in CAUSE on
sky interrupt.
end-sanitize-sky
Fri Jul 31 18:14:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
* vr.igen (MulAcc): Identify as a vr4100 specific function.
Sat Jul 25 16:03:14 1998 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (IGEN_INCLUDE): Add vr.igen.
* vr.igen: New file.
(MAC/MADD16, DMAC/DMADD16): Implement using code from gencode.c.
* mips.igen: Define vr4100 model. Include vr.igen.
start-sanitize-cygnus
* vr5400.igen: Move instructions to vr.igen
* Makefile.in (IGEN_INCLUDE): Remove vr5400.igen.
end-sanitize-cygnus
start-sanitize-vr4320
* vr4320.igen: Move instructions to vr.igen.
* Makefile.in (IGEN_INCLUDE): Remove vr5320.igen.
end-sanitize-vr4320
start-sanitize-sky
Fri Jul 24 16:01:03 1998 Ian Carmichael <iancarm@cygnus.com>
* interp.c (MONITOR_SIZE): Make 1MB monitor for SKY.
* mips.igen (BREAK): Fix 0xffff2 monitor call. Slightly less
confusing message if not enough --load-next options appear.
* sky-pke.h (VUx_MEMx_SRCADDR_START): Move to 0x19800000 range.
* sim-main.c (GDB_COMM_AREA): Move to 0x19810000.
* sky-gdb.c (init_fifo_bp_cache): Use VIO_BASE when reading GDB area.
(resume_handler): Same.
(suspend_handler): Same.
Wed Jul 22 13:04:13 1998 Frank Ch. Eigler <fche@cygnus.com>
* mips.igen (break): Implement LOAD_INSTRUCTION ("break 0xffff1")
to trigger multi-phase load.
* sim-main.c: Include sim-assert.h for ASSERT macro.
* sim-main.h (PRINTF_INSTRUCTION): Correct bit pattern for
"break 0xffff2".
Tue Jul 21 18:37:36 1998 Ian Carmichael <iancarm@cygnus.com>
MMU support.
* interp.c (sim_open): Initialize TLB.
* interp.c (signal_exceptions): New 5900 handling.
* r5900.igen (TLBWR, TLBWI, TLBR, TLBP): Make these work.
* sim-main.c (tlb_try_match, tlb_lookup): New functions.
(address_translation): Use the TLB.
* sim-main.h (r4000_tlb_entry_t): New type.
(TLB_*): New constants.
(COP0_*): New register names.
Sky character I/O device.
* sky-psio.c: New file.
* sky-psio.h: New file.
* Makefile.in: Add sky-psio.o.
end-sanitize-sky
start-sanitize-r5900
Tue Jul 14 16:10:45 1998 Andrew Cagney <cagney@b1.cygnus.com>
* r5900.igen (r59fp_overflow): Replace argument ANS with argument
SIGN_P.
(r59fp_zero): Ditto.
(r59fp_store): Update calls.
(DIV.S): Compute 0/0 sign from inputs. Ditto for X/0.
end-sanitize-r5900
start-sanitize-branchbug4011
Mon Jun 29 09:31:27 1998 Gavin Koch <gavin@cygnus.com>
* interp.c (OPTION_BRANCH_BUG_4011): Add.
(mips_option_handler): Handle OPTION_BRANCH_BUG_4011.
(mips_options): Define the option.
* mips.igen (check_4011_branch_bug): New.
(mark_4011_branch_bug): New.
(all branch insn): Call mark_branch_bug, and check_branch_bug.
* sim-main.h (branchbug4011_option, branchbug4011_last_target,
branchbug4011_last_cia, BRANCHBUG4011_OPTION,
BRANCHBUG4011_LAST_TARGET, BRANCHBUG4011_LAST_CIA,
check_branch_bug, mark_branch_bug): Define.
end-sanitize-branchbug4011
Mon Jun 29 09:21:07 1998 Gavin Koch <gavin@cygnus.com>
* mips.igen (check_mf_hilo): Correct check.
start-sanitize-r5900
Fri Jun 19 14:44:46 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (NR_COP0_GPR, COP0_GPR, cop0_gpr, NR_COP0_BP,
COP0_BP, cop0_bp, NR_COP0_P, COP0_P, cop0_p): Add 32 COP0 general
purpose registers, add 8 COP0 break-point registers, add 64 COP0
performance registers.
* interp.c (decode_coproc): Accept any MTC0/MFC0, MTBP/MFBP, MTP*
MFP* instructions. Just transfer value to/from corresponding
register.
* r5900.igen (BC0F, BC0FL, BC0T, BC0TL): Implement, assume COP0
status is always true.
(CACHE, TLBP, TPGWI, TLBWR): Treat as NOP.
(EI, DI): Set/clear Status-EIE bit.
end-sanitize-r5900
start-sanitize-sky
Fri Jun 19 14:44:46 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (BC0F, BC0FL, BC0T, BC0TL): Move to sky code to
r5900.igen.
end-sanitize-sky
Wed Jun 17 12:20:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
start-sanitize-sky
* sky-vu.c (vu0_read_cop2_register, vu0_write_cop2_register): Call
ASSERT not assert.
* sky-gdb.c: Include "sim-assert.h".
end-sanitize-sky
* sim-main.h (interrupt_event): Add prototype.
* dv-tx3904tmr.c (tx3904tmr_io_write_buffer): Delete unused
register_ptr, register_value.
(deliver_tx3904tmr_tick): Fix types passed to printf fmt.
* sim-main.h (tracefh): Make extern.
Tue Jun 16 14:39:00 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: Deschedule timer event after dispatching.
Reduce unnecessarily high timer event frequency.
* dv-tx3904cpu.c: Ditto for interrupt event.
start-sanitize-sky
Tue Jun 16 14:12:09 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Removed COP2 branches.
* r5900.igen: Moved COP2 branch instructions here.
* mips.igen: Restricted COPz == COP2 bit pattern to
exclude COP2 branches.
end-sanitize-sky
Wed Jun 10 13:22:32 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): For TX39, add stub COP0 register #7,
to allay warnings.
(interrupt_event): Made non-static.
* dv-tx3904tmr.c (deliver_tx3904tmr_tick): Correct accidental
interchange of configuration values for external vs. internal
clock dividers.
Tue Jun 9 12:46:24 1998 Ian Carmichael <iancarm@cygnus.com>
* mips.igen (BREAK): Moved code to here for
simulator-reserved break instructions.
* gencode.c (build_instruction): Ditto.
* interp.c (signal_exception): Code moved from here. Non-
reserved instructions now use exception vector, rather
than halting sim.
* sim-main.h: Moved magic constants to here.
Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE
register upon non-zero interrupt event level, clear upon zero
event value.
* dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal
by passing zero event value.
(*_io_{read,write}_buffer): Endianness fixes.
* dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes.
(deliver_*_tick): Reduce sim event interval to 75% of count interval.
* interp.c (sim_open): Added jmr3904pal board type that adds PAL-based
serial I/O and timer module at base address 0xFFFF0000.
Tue Jun 9 11:52:29 1998 Gavin Koch <gavin@cygnus.com>
* mips.igen (SWC1) : Correct the handling of ReverseEndian
and BigEndianCPU.
Tue Jun 9 11:40:57 1998 Gavin Koch <gavin@cygnus.com>
* configure.in (mips_fpu_bitsize) : Set this correctly for 32-bit mips
parts.
* configure: Update.
Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: New file - implements tx3904 timer.
* dv-tx3904{irc,cpu}.c: Mild reformatting.
* configure.in: Include tx3904tmr in hw_device list.
* configure: Rebuilt.
* interp.c (sim_open): Instantiate three timer instances.
Fix address typo of tx3904irc instance.
start-sanitize-r5900
Thu Jun 4 16:47:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (check_mt_hilo): 2.1 of r5900 spec stalls for HILO.
Select corresponding check_mt_hilo function.
(check_mult_hilo, check_div_hilo, check_mf_hilo, check_mt_hilo):
Ditto.
* r5900.igen (check_mult_hilo_hi1lo1, check_div_hilo_hi1lo1): Mark
as r5900 specific.
end-sanitize-r5900
Tue Jun 2 15:48:02 1998 Ian Carmichael <iancarm@cygnus.com>
* interp.c (signal_exception): SystemCall exception now uses
the exception vector.
Mon Jun 1 18:18:26 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): For TX39, add stub COP0 register #3,
to allay warnings.
start-sanitize-r5900
Mon Jun 1 10:28:25 1998 Jeffrey A Law (law@cygnus.com)
* r5900.igen (rsqrt.s): Update based on r5900 ISA manual version 2.1.
(sqrt.s): Likewise.
end-sanitize-r5900
Fri May 29 11:40:39 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (sim_igen_filter): Match mips*tx39 not mipst*tx39.
Mon May 25 20:47:45 1998 Andrew Cagney <cagney@b1.cygnus.com>
* dv-tx3904cpu.c, dv-tx3904irc.c: Rename *_callback to *_method.
* dv-tx3904cpu.c, dv-tx3904irc.c: Include hw-main.h and
sim-main.h. Declare a struct hw_descriptor instead of struct
hw_device_descriptor.
Mon May 25 12:41:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (do_store_left, do_load_left): Compute nr of left and
right bits and then re-align left hand bytes to correct byte
lanes. Fix incorrect computation in do_store_left when loading
bytes from second word.
Fri May 22 13:34:20 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (SIM_AC_OPTION_HARDWARE): Only enable when tx3904.
* interp.c (sim_open): Only create a device tree when HW is
enabled.
* dv-tx3904irc.c (tx3904irc_finish): Pacify GCC.
* interp.c (signal_exception): Ditto.
Thu May 21 14:24:11 1998 Gavin Koch <gavin@cygnus.com>
* gencode.c: Mark BEGEZALL as LIKELY.
Thu May 21 18:57:19 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (ALU32_END): Sign extend 32 bit results.
* mips.igen (ADD, SUB, ADDI, DADD, DSUB): Trace.
start-sanitize-r5900
Thu May 21 17:15:39 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_fetch_register): Convert internal r5900 regs to
target byte order
end-sanitize-r5900
Mon May 18 18:22:42 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware
modules. Recognize TX39 target with "mips*tx39" pattern.
* configure: Rebuilt.
* sim-main.h (*): Added many macros defining bits in
TX39 control registers.
(SignalInterrupt): Send actual PC instead of NULL.
(SignalNMIReset): New exception type.
* interp.c (board): New variable for future use to identify
a particular board being simulated.
(mips_option_handler,mips_options): Added "--board" option.
(interrupt_event): Send actual PC.
(sim_open): Make memory layout conditional on board setting.
(signal_exception): Initial implementation of hardware interrupt
handling. Accept another break instruction variant for simulator
exit.
(decode_coproc): Implement RFE instruction for TX39.
(mips.igen): Decode RFE instruction as such.
* configure.in (tx3904cpu,tx3904irc): Added devices for tx3904.
* interp.c: Define "jmr3904" and "jmr3904debug" board types and
bbegin to implement memory map.
* dv-tx3904cpu.c: New file.
* dv-tx3904irc.c: New file.
Wed May 13 14:40:11 1998 Gavin Koch <gavin@cygnus.com>
* mips.igen (check_mt_hilo): Create a separate r3900 version.
start-sanitize-r5900
Wed May 13 14:27:53 1998 Gavin Koch <gavin@cygnus.com>
* r5900.igen: Replace the calls and the definition of the
function check_op_hilo_hi1lo1 with the pair
check_mult_hilo_hi1lo1 and check_mult_hilo_hi1lo1.
end-sanitize-r5900
Wed May 13 14:11:46 1998 Gavin Koch <gavin@cygnus.com>
* tx.igen (madd,maddu): Replace calls to check_op_hilo
with calls to check_div_hilo.
Wed May 13 09:59:27 1998 Gavin Koch <gavin@cygnus.com>
* mips/mips.igen (check_op_hilo,check_mult_hilo,check_div_hilo):
Replace check_op_hilo with check_mult_hilo and check_div_hilo.
Add special r3900 version of do_mult_hilo.
(do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo
with calls to check_mult_hilo.
(do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo
with calls to check_div_hilo.
Tue May 12 15:22:11 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (SUBTARGET_R3900): Define for mipstx39 target.
Document a replacement.
Fri May 8 17:48:19 1998 Ian Carmichael <iancarm@cygnus.com>
* interp.c (sim_monitor): Make mon_printf work.
Wed May 6 19:42:19 1998 Doug Evans <devans@canuck.cygnus.com>
* sim-main.h (INSN_NAME): New arg `cpu'.
start-sanitize-sky
Thu Apr 30 18:51:26 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sky-libvpe.c (FMAdd, FMSub): Replace r59fp_op3 call with
r59fp_mula.
end-sanitize-sky
start-sanitize-r5900
Wed Apr 29 22:54:45 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (R5900_FP_MAX, R5900_FP_MIN): Define.
* r5900.igen (r59fp_overflow): Use.
* r5900.igen (r59fp_op3): Rename to
(r59fp_mula): This, delete opm argument.
(MADD.S, MADDA.S, MSUB.S, MSUBS.S): Update.
(r59fp_mula): Overflowing product propogates through to result.
(r59fp_mula): ACC to the MAX propogates to result.
(r59fp_mula): Underflow during multiply only sets SU.
end-sanitize-r5900
Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Sun Apr 26 15:20:01 1998 Tom Tromey <tromey@cygnus.com>
* acconfig.h: New file.
* configure.in: Reverted change of Apr 24; use sinclude again.
Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Fri Apr 24 11:19:20 1998 Tom Tromey <tromey@cygnus.com>
* configure.in: Don't call sinclude.
Fri Apr 24 11:35:01 1998 Andrew Cagney <cagney@chook.cygnus.com>
* mips.igen (do_store_left): Pass 0 not NULL to store_memory.
Tue Apr 21 11:59:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (ERET): Implement.
* interp.c (decode_coproc): Return sign-extended EPC.
* mips.igen (ANDI, LUI, MFC0): Add tracing code.
* interp.c (signal_exception): Do not ignore Trap.
(signal_exception): On TRAP, restart at exception address.
(HALT_INSTRUCTION, HALT_INSTRUCTION_MASK): Define.
(signal_exception): Update.
(sim_open): Patch V_COMMON interrupt vector with an abort sequence
so that TRAP instructions are caught.
Mon Apr 20 11:26:55 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (struct hilo_access, struct hilo_history): Define,
contains HI/LO access history.
(struct _sim_cpu): Make hiaccess and loaccess of type hilo_access.
(HIACCESS, LOACCESS): Delete, replace with
(HIHISTORY, LOHISTORY): New macros.
(start-sanitize-r5900):
(struct sim_5900_cpu): Make hi1access, lo1access of type
hilo_access.
(HI1ACCESS, LO1ACCESS): Delete, replace with
(HI1HISTORY, LO1HISTORY): New macros.
(end-sanitize-r5900):
(CHECKHILO): Delete all, moved to mips.igen
* gencode.c (build_instruction): Do not generate checks for
correct HI/LO register usage.
* interp.c (old_engine_run): Delete checks for correct HI/LO
register usage.
* mips.igen (check_mt_hilo, check_mf_hilo, check_op_hilo,
check_mf_cycles): New functions.
(do_mfhi, do_mflo, "mthi", "mtlo", do_ddiv, do_ddivu, do_div,
do_divu, domultx, do_mult, do_multu): Use.
* tx.igen ("madd", "maddu"): Use.
(start-sanitize-r5900):
r5900.igen: Update all HI/LO checks.
("mfhi1", "mflo1", "mthi1", "mthi1", "pmfhi", "pmflo", "pmfhl",
"pmthi", "pmtlo", "mpthl"): Check MF/MT HI/LO.
("mult1", "div1", "divu1", "multu1", "madd1", "maddu1", "pdivbw",
"pdivuw", "pdivw", "phmaddh", "phmsubh", "pmaddh", "madduw",
"pmaddw", "pmsubh", "pmsubw", "pmulth", "pmultuw", "pmultw"):
Check HI/LO op.
(end-sanitize-r5900):
start-sanitize-sky
Mon Apr 20 18:39:47 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Correct CMFC2/QMTC2
GPR access.
* r5900.igen (LQ,SQ): Use a pair of 64-bit accesses
instead of a single 128-bit access.
end-sanitize-sky
start-sanitize-sky
Fri Apr 17 14:50:39 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (COP_[LS]Q): Transfer COP2 quadwords.
* interp.c (cop_[ls]q): Fixes corresponding to above.
end-sanitize-sky
start-sanitize-sky
Thu Apr 16 15:24:14 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Adapt COP2 micro interlock to
clarified specs. Reset "M" bit; exit also on "E" bit.
end-sanitize-sky
start-sanitize-r5900
Thu Apr 16 10:40:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
* r5900.igen (CFC1, CTC1): Implement R5900 specific version.
* mips.igen (CFC1, CTC1): R5900 des not use generic version.
* r5900.igen (r59fp_unpack): New function.
(r59fp_op1, r59fp_op2, r59fp_op3, C.cond.S, CVT.S.W, DIV.S,
RSQRT.S, SQRT.S): Use.
(r59fp_zero): New function.
(r59fp_overflow): Generate r5900 specific overflow value.
(r59fp_store): Re-write, overflow to MAX_R5900_FP value, underflow
to zero.
(CVT.S.W, CVT.W.S): Exchange implementations.
* sim-main.h (R5900_EXPMAX, R5900_EXPMIN, R5900_EXPBIAS): Defile.
end-sanitize-r5900
start-sanitize-tx19
Thu Apr 16 09:14:44 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (tx19, sim_use_gen): Switch to igen.
* configure: Re-build.
end-sanitize-tx19
start-sanitize-sky
Wed Apr 15 12:41:18 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Make COP2 branch code compile after
igen signature changes.
end-sanitize-sky
Wed Apr 15 18:31:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (DSRAV): Use function do_dsrav.
(SRAV): Use new function do_srav.
* m16.igen (BEQZ, BNEZ): Compare GPR[TRX] not GPR[RX].
(B): Sign extend 11 bit immediate.
(EXT-B*): Shift 16 bit immediate left by 1.
(ADDIU*): Don't sign extend immediate value.
Wed Apr 15 10:32:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
* m16run.c (sim_engine_run): Restore CIA after handling an event.
start-sanitize-tx19
* mips.igen (mtc0): Valid tx19 instruction.
end-sanitize-tx19
* sim-main.h (DELAY_SLOT, NULLIFY_NEXT_INSTRUCTION): For IGEN, use
functions.
* mips.igen (delayslot32, nullify_next_insn): New functions.
(m16.igen): Always include.
(do_*): Add more tracing.
* m16.igen (delayslot16): Add NIA argument, could be called by a
32 bit MIPS16 instruction.
* interp.c (ifetch16): Move function from here.
* sim-main.c (ifetch16): To here.
* sim-main.c (ifetch16, ifetch32): Update to match current
implementations of LH, LW.
(signal_exception): Don't print out incorrect hex value of illegal
instruction.
Wed Apr 15 00:17:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
* m16run.c (sim_engine_run): Use IMEM16 and IMEM32 to fetch an
instruction.
* m16.igen: Implement MIPS16 instructions.
* mips.igen (do_addiu, do_addu, do_and, do_daddiu, do_daddu,
do_ddiv, do_ddivu, do_div, do_divu, do_dmultx, do_dmultu, do_srav,
do_dsubu, do_mfhi, do_mflo, do_mult, do_multu, do_nor, do_or,
do_sll, do_sllv, do_slt, do_slti, do_sltiu, do_sltu, do_sra,
do_srl, do_srlv, do_subu, do_xor, do_xori): New functions. Move
bodies of corresponding code from 32 bit insn to these. Also used
by MIPS16 versions of functions.
* sim-main.h (RAIDX, T8IDX, T8, SPIDX): Define.
(IMEM16): Drop NR argument from macro.
start-sanitize-sky
Mon Apr 13 16:28:52 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Add proper 1000000 bit-string at top
of VU lower instruction.
end-sanitize-sky
start-sanitize-sky
Thu Apr 9 16:38:23 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (LQC,SQC): Adapted code to DOUBLEWORD accesses
instead of QUADWORD.
* sim-main.h: Removed attempt at allowing 128-bit access.
end-sanitize-sky
start-sanitize-sky
Wed Apr 8 18:12:13 1998 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (SIM_SKY_OBJS): Added sky-vudis.o.
* interp.c (decode_coproc): Refer to VU CIA as a "special"
register, not as a "misc" register. Aha. Add activity
assertions after VCALLMS* instructions.
end-sanitize-sky
start-sanitize-sky
Tue Apr 7 18:32:49 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Do not apply superfluous E (end) flag
to upper code of generated VU instruction.
end-sanitize-sky
start-sanitize-sky
Mon Apr 6 19:55:56 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (cop_[ls]q): Replaced stub with proper COP2 code.
* sim-main.h (LOADADDRMASK): Redefine to allow 128-bit accesses
for TARGET_SKY.
* r5900.igen (SQC2): Thinko.
end-sanitize-sky
start-sanitize-sky
Sun Apr 5 12:05:44 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (*): Adapt code to merged VU device & state structs.
(decode_coproc): Execute COP2 each macroinstruction without
pipelining, by stepping VU to completion state. Adapted to
read_vu_*_reg style of register access.
* mips.igen ([SL]QC2): Removed these COP2 instructions.
* r5900.igen ([SL]QC2): Transplanted these COP2 instructions here.
* sim-main.h (cop_[ls]q): Enclosed in TARGET_SKY guards.
end-sanitize-sky
Sat Apr 4 22:39:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_OBJS): Add sim-main.o.
* sim-main.h (address_translation, load_memory, store_memory,
cache_op, sync_operation, prefetch, ifetch32, pending_tick): Mark
as INLINE_SIM_MAIN.
(pr_addr, pr_uword64): Declare.
(sim-main.c): Include when H_REVEALS_MODULE_P.
* interp.c (address_translation, load_memory, store_memory,
cache_op, sync_operation, prefetch, ifetch32, pending_tick): Move
from here.
* sim-main.c: To here. Fix compilation problems.
* configure.in: Enable inlining.
* configure: Re-config.
Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Apr 3 04:32:35 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen: Include tx.igen.
* Makefile.in (IGEN_INCLUDE): Add tx.igen.
* tx.igen: New file, contains MADD and MADDU.
* interp.c (load_memory): When shifting bytes, use LOADDRMASK not
the hardwired constant `7'.
(store_memory): Ditto.
(LOADDRMASK): Move definition to sim-main.h.
mips.igen (MTC0): Enable for r3900.
(ADDU): Add trace.
mips.igen (do_load_byte): Delete.
(do_load, do_store, do_load_left, do_load_write, do_store_left,
do_store_right): New functions.
(SW*, LW*, SD*, LD*, SH, LH, SB, LB): Use.
configure.in: Let the tx39 use igen again.
configure: Update.
Thu Apr 2 10:59:39 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_monitor): get_mem_info returns a 4 byte quantity,
not an address sized quantity. Return zero for cache sizes.
Wed Apr 1 23:47:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (r3900): r3900 does not support 64 bit integer
operations.
start-sanitize-sky
Wed Apr 1 08:20:31 1998 Frank Ch. Eigler <fche@cygnus.com>
* mips.igen (SQC2/LQC2): Make bodies sky-target-only also.
end-sanitize-sky
start-sanitize-sky
Mon Mar 30 18:41:43 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Continuing COP2 work.
(cop_[ls]q): Make sky-target-only.
* sim-main.h (COP_[LS]Q): Make sky-target-only.
end-sanitize-sky
Mon Mar 30 14:46:05 1998 Gavin Koch <gavin@cygnus.com>
* configure.in (mipstx39*-*-*): Use gencode simulator rather
than igen one.
* configure : Rebuild.
start-sanitize-sky
Sun Mar 29 17:50:11 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Added a missing TARGET_SKY check
around COP2 implementation skeleton.
end-sanitize-sky
start-sanitize-sky
Fri Mar 27 16:19:29 1998 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (SIM_SKY_OBJS): Replaced sky-vu[01].o with sky-vu.o.
* interp.c (sim_{load,store}_register): Use new vu[01]_device
static to access VU registers.
(decode_coproc): Added skeleton of sky COP2 (VU) instruction
decoding. Work in progress.
* mips.igen (LDCzz, SDCzz): Removed *5900 case for this
overlapping/redundant bit pattern.
(LQC2, SQC2): Added *5900 COP2 instruction skeleta. Work in
progress.
* sim-main.h (status_CU[012]): Added COP[n]-enabled flags for
status register.
* interp.c (cop_lq, cop_sq): New functions for future 128-bit
access to coprocessor registers.
* sim-main.h (COP_LQ, COP_SQ): New macro front-ends for above.
end-sanitize-sky
Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Mar 27 15:01:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (mips_option_handler): Iterate over MAX_NR_PROCESSORS.
Wed Mar 25 16:44:27 1998 Ian Carmichael <iancarm@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Regenerated to track ../common/aclocal.m4 changes.
Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Mar 25 10:05:46 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (Max, Min): Comment out functions. Not yet used.
start-sanitize-vr4320
Wed Mar 25 10:04:13 1998 Andrew Cagney <cagney@b1.cygnus.com>
* vr4320.igen (DCLZ): Pacify GCC, 64 bit arg, int format.
end-sanitize-vr4320
Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Mar 17 19:05:20 1998 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added
configurable settings for stand-alone simulator.
start-sanitize-sky
* configure.in: Added --with-sim-gpu2 option to specify path of
sky GPU2 library. Triggers -DSKY_GPU2 for sky-gpuif.c, and
links/compiles stand-alone simulator with this library.
* interp.c (MEM_SIZE): Increased default sky memory size to 16MB.
end-sanitize-sky
* configure.in: Added X11 search, just in case.
* configure: Regenerated.
Wed Mar 11 14:09:10 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_write, sim_read, load_memory, store_memory):
Replace sim_core_*_map with read_map, write_map, exec_map resp.
start-sanitize-vr4320
Tue Mar 10 10:32:22 1998 Gavin Koch <gavin@cygnus.com>
* vr4320.igen (clz,dclz) : Added.
(dmac): Replaced 99, with LO.
end-sanitize-vr4320
start-sanitize-cygnus
Fri Mar 6 08:30:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mdmx.igen (SHFL.REPA.fmt, SHFL.REPB.fmt): Fix bit fields.
end-sanitize-cygnus
start-sanitize-vr4320
Tue Mar 3 11:56:29 1998 Gavin Koch <gavin@cygnus.com>
* vr4320.igen: New file.
* Makefile.in (vr4320.igen) : Added.
* configure.in (mips64vr4320-*-*): Added.
* configure : Rebuilt.
* mips.igen : Correct the bfd-names in the mips-ISA model entries.
Add the vr4320 model entry and mark the vr4320 insn as necessary.
end-sanitize-vr4320
Tue Mar 3 13:58:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (GETFCC): Return an unsigned value.
start-sanitize-r5900
* r5900.igen: Use an unsigned array index variable `i'.
(QFSRV): Ditto for variable bytes.
end-sanitize-r5900
Tue Mar 3 13:21:37 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (DIV): Fix check for -1 / MIN_INT.
(DADD): Result destination is RD not RT.
start-sanitize-r5900
* r5900.igen (DIV1): Fix check for -1 / MIN_INT.
(DIVU1): Don't check for MIN_INT / -1 as performing unsigned
divide.
end-sanitize-r5900
Fri Feb 27 13:49:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (HIACCESS, LOACCESS): Always define.
* mdmx.igen (Maxi, Mini): Rename Max, Min.
* interp.c (sim_info): Delete.
Fri Feb 27 18:41:01 1998 Doug Evans <devans@canuck.cygnus.com>
* interp.c (DECLARE_OPTION_HANDLER): Use it.
(mips_option_handler): New argument `cpu'.
(sim_open): Update call to sim_add_option_table.
Wed Feb 25 18:56:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (CxC1): Add tracing.
start-sanitize-r5900
Wed Feb 25 13:59:03 1998 Andrew Cagney <cagney@b1.cygnus.com>
* r5900.igen (StoreFP): Delete.
(r59fp_store, r59fp_overflow, r59fp_op1, r59fp_op2, r59fp_op3):
New functions.
(rsqrt.s, sqrt.s): Implement.
(r59cond): New function.
(C.COND.S): Call r59cond in assembler line.
(cvt.w.s, cvt.s.w): Implement.
* mips.igen (rsqrt.fmt, sqrt.fmt, cvt.*.*): Remove from r5900
instruction set.
* sim-main.h: Define an enum of r5900 FCSR bit fields.
end-sanitize-r5900
start-sanitize-r5900
Tue Feb 24 14:44:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
* r5900.igen: Add tracing to all p* instructions.
Tue Feb 24 02:47:33 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_store_register, sim_fetch_register): Pull swifty
to get gdb talking to re-aranged sim_cpu register structure.
end-sanitize-r5900
Fri Feb 20 17:43:21 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (Max, Min): Declare.
* interp.c (Max, Min): New functions.
* mips.igen (BC1): Add tracing.
start-sanitize-cygnus
Fri Feb 20 16:27:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
* mdmx.igen: Tag all functions as requiring either with mdmx or
vr5400 processor.
end-sanitize-cygnus
start-sanitize-r5900
Fri Feb 20 15:55:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (SIM_AC_OPTION_FLOAT): For r5900, set FP bit size
to 32.
(SIM_AC_OPTION_BITSIZE): For r5900, set nr address bits to 32.
* mips.igen (C.cond.fmt, ..): Not part of r5900 insn set.
* r5900.igen: Rewrite.
* sim-main.h: Move r5900 registers to a separate _sim_r5900_cpu
struct.
(GPR_SB, GPR_SH, GPR_SW, GPR_SD, GPR_UB, GPR_UH, GPR_UW, GPR_UD):
Define in terms of GPR/GPR1 instead of REGISTERS/REGISTERS.1
end-sanitize-r5900
Thu Feb 19 14:50:00 1998 John Metzler <jmetzler@cygnus.com>
* interp.c Added memory map for stack in vr4100
Thu Feb 19 10:21:21 1998 Gavin Koch <gavin@cygnus.com>
* interp.c (load_memory): Add missing "break"'s.
Tue Feb 17 12:45:35 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_store_register, sim_fetch_register): Pass in
length parameter. Return -1.
Tue Feb 10 11:57:40 1998 Ian Carmichael <iancarm@cygnus.com>
* interp.c: Added hardware init hook, fixed warnings.
Sat Feb 7 17:16:20 1998 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (itable.h itable.c): Depend on SIM_@sim_gen@_ALL.
Tue Feb 3 11:36:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (ifetch16): New function.
* sim-main.h (IMEM32): Rename IMEM.
(IMEM16_IMMED): Define.
(IMEM16): Define.
(DELAY_SLOT): Update.
* m16run.c (sim_engine_run): New file.
* m16.igen: All instructions except LB.
(LB): Call do_load_byte.
* mips.igen (do_load_byte): New function.
(LB): Call do_load_byte.
* mips.igen: Move spec for insn bit size and high bit from here.
* Makefile.in (tmp-igen, tmp-m16): To here.
* m16.dc: New file, decode mips16 instructions.
* Makefile.in (SIM_NO_ALL): Define.
(tmp-m16): Generate both 16 bit and 32 bit simulator engines.
start-sanitize-tx19
* m16.igen: Mark all mips16 insns as being part of the tx19 insn
set.
end-sanitize-tx19
Tue Feb 3 11:28:00 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (mips_fpu_bitsize): For tx39, restrict floating
point unit to 32 bit registers.
* configure: Re-generate.
Sun Feb 1 15:47:14 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (sim_use_gen): Make IGEN the default simulator
generator for generic 32 and 64 bit mips targets.
* configure: Re-generate.
Sun Feb 1 16:52:37 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (SizeFGR): Determine from floating-point and not gpr
bitsize.
* interp.c (sim_fetch_register, sim_store_register): Read/write
FGR from correct location.
(sim_open): Set size of FGR's according to
WITH_TARGET_FLOATING_POINT_BITSIZE.
* sim-main.h (FGR): Store floating point registers in a separate
array.
Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
start-sanitize-cygnus
* mdmx.igen: Mark all instructions as 64bit/fp specific.
end-sanitize-cygnus
Tue Feb 3 00:10:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (ColdReset): Call PENDING_INVALIDATE.
* sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Call PENDING_TICK.
* interp.c (pending_tick): New function. Deliver pending writes.
* sim-main.h (PENDING_FILL, PENDING_TICK, PENDING_SCHED,
PENDING_BIT, PENDING_INVALIDATE): Re-write pipeline code so that
it can handle mixed sized quantites and single bits.
Mon Feb 2 17:43:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (oengine.h): Do not include when building with IGEN.
(sim_open): Replace GPRLEN by WITH_TARGET_WORD_BITSIZE.
(sim_info): Ditto for PROCESSOR_64BIT.
(sim_monitor): Replace ut_reg with unsigned_word.
(*): Ditto for t_reg.
(LOADDRMASK): Define.
(sim_open): Remove defunct check that host FP is IEEE compliant,
using software to emulate floating point.
(value_fpr, ...): Always compile, was conditional on HASFPU.
Sun Feb 1 11:15:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (sim_state): Make the cpu array MAX_NR_PROCESSORS in
size.
* interp.c (SD, CPU): Define.
(mips_option_handler): Set flags in each CPU.
(interrupt_event): Assume CPU 0 is the one being iterrupted.
(sim_close): Do not clear STATE, deleted anyway.
(sim_write, sim_read): Assume CPU zero's vm should be used for
data transfers.
(sim_create_inferior): Set the PC for all processors.
(sim_monitor, store_word, load_word, mips16_entry): Add cpu
argument.
(mips16_entry): Pass correct nr of args to store_word, load_word.
(ColdReset): Cold reset all cpu's.
(signal_exception): Pass cpu to sim_monitor & mips16_entry.
(sim_monitor, load_memory, store_memory, signal_exception): Use
`CPU' instead of STATE_CPU.
* sim-main.h: Replace uses of STATE_CPU with CPU. Replace sd with
SD or CPU_.
* sim-main.h (signal_exception): Add sim_cpu arg.
(SignalException*): Pass both SD and CPU to signal_exception.
* interp.c (signal_exception): Update.
* sim-main.h (value_fpr, store_fpr, dotrace, ifetch32), interp.c:
Ditto
(sync_operation, prefetch, cache_op, store_memory, load_memory,
address_translation): Ditto
(decode_coproc, cop_lw, cop_ld, cop_sw, cop_sd): Ditto.
start-sanitize-cygnus
* mdmx.igen (get_scale): Pass CPU_ to semantic_illegal instead of
`sd'.
(ByteAlign): Use StoreFPR, pass args in correct order.
end-sanitize-cygnus
start-sanitize-r5900
Sun Feb 1 10:59:55 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (sim_igen_filter): For r5900, configure as SMP.
end-sanitize-r5900
Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sat Jan 31 14:49:24 1998 Andrew Cagney <cagney@b1.cygnus.com>
start-sanitize-r5900
* configure.in (sim_igen_filter): For r5900, use igen.
* configure: Re-generate.
end-sanitize-r5900
* interp.c (sim_engine_run): Add `nr_cpus' argument.
* mips.igen (model): Map processor names onto BFD name.
* sim-main.h (CPU_CIA): Delete.
(SET_CIA, GET_CIA): Define
Wed Jan 21 16:16:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (GPR_SET): Define, used by igen when zeroing a
regiser.
* configure.in (default_endian): Configure a big-endian simulator
by default.
* configure: Re-generate.
Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Jan 5 20:38:54 1998 Mark Alexander <marka@cygnus.com>
* interp.c (sim_monitor): Handle Densan monitor outbyte
and inbyte functions.
1997-12-29 Felix Lee <flee@cygnus.com>
* interp.c (sim_engine_run): msvc cpp barfs on #if (a==b!=c).
Wed Dec 17 14:48:20 1997 Jeffrey A Law (law@cygnus.com)
* Makefile.in (tmp-igen): Arrange for $zero to always be
reset to zero after every instruction.
Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
start-sanitize-cygnus
Sat Dec 13 15:18:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
* vr5400.igen (Low32Bits, High32Bits): Sign extend extracted 32
bit values.
Fri Dec 12 12:26:07 1997 Jeffrey A Law (law@cygnus.com)
* configure.in (sim_igen_filter): Multi-sim vr5000 - vr5000 or
vr5400 with the vr5000 as the default.
end-sanitize-cygnus
Wed Dec 10 17:10:45 1997 Jeffrey A Law (law@cygnus.com)
* mips.igen (MSUB): Fix to work like MADD.
* gencode.c (MSUB): Similarly.
start-sanitize-cygnus
Tue Dec 9 12:02:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (sim_igen_filter): Multi-sim vr5400 - vr5000 or
vr5400.
end-sanitize-cygnus
Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Nov 26 11:00:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen (LWC1): Correct assembler - lwc1 not swc1.
start-sanitize-cygnus
* mdmx.igen (value_vr): Correct sim_io_eprintf format argument.
(value_cc, store_cc): Implement.
* sim-main.h: Add 8*3*8 bit accumulator.
* vr5400.igen: Move mdmx instructins from here
* mdmx.igen: To here - new file. Add/fix missing instructions.
* mips.igen: Include mdmx.igen.
* Makefile.in (IGEN_INCLUDE): Add mdmx.igen.
end-sanitize-cygnus
Sun Nov 23 01:45:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (sim-fpu.h): Include.
* interp.c (convert, SquareRoot, Recip, Divide, Multiply, Sub,
Add, Negate, AbsoluteValue, Equal, Less, Infinity, NaN): Rewrite
using host independant sim_fpu module.
Thu Nov 20 19:56:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (signal_exception): Report internal errors with SIGABRT
not SIGQUIT.
* sim-main.h (C0_CONFIG): New register.
(signal.h): No longer include.
* interp.c (decode_coproc): Allow access C0_CONFIG to register.
Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
* Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
Fri Nov 14 11:56:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen: Tag vr5000 instructions.
(ANDI): Was missing mipsIV model, fix assembler syntax.
(do_c_cond_fmt): New function.
(C.cond.fmt): Handle mips I-III which do not support CC field
separatly.
(bc1): Handle mips IV which do not have a delaed FCC separatly.
(SDR): Mask paddr when BigEndianMem, not the converse as specified
in IV3.2 spec.
(DMULT, DMULTU): Force use of hosts 64bit multiplication. Handle
vr5000 which saves LO in a GPR separatly.
* configure.in (enable-sim-igen): For vr5000, select vr5000
specific instructions.
* configure: Re-generate.
Wed Nov 12 14:42:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_OBJS): Add sim-fpu module.
* interp.c (store_fpr), sim-main.h: Add separate fmt_uninterpreted_32 and
fmt_uninterpreted_64 bit cases to switch. Convert to
fmt_formatted,
* sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Define,
* mips.igen (SWR): Mask paddr when BigEndianMem, not the converse
as specified in IV3.2 spec.
(MTC1, DMTC1): Call StoreFPR to store the GPR in the FPR.
Tue Nov 11 12:38:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen: Delay slot branches add OFFSET to NIA not CIA.
(MFC0, MTC0, SWC1, LWC1, SDC1, LDC1): Implement.
(start-sanitize-r5900):
(LWXC1, SWXC1): Delete from r5900 instruction set.
(end-sanitize-r5900):
(MTC1, MFC1, DMTC1, DMFC1, CFC1, CTC1): Implement separate non
PENDING_FILL versions of instructions. Simplify.
(X): New function.
(MULT, MULTU): Implement separate RD==0 and RD!=0 versions of
instructions.
(BEQZ, ..., SLT, SLTI, TLT, TLE, TLI, ...): Explicitly cast GPR to
a signed value.
(MTHI, MFHI): Disable code checking HI-LO.
* sim-main.h (dotrace,tracefh), interp.c: Make dotrace & tracefh
global.
(NULLIFY_NEXT_INSTRUCTION): Call dotrace.
Thu Nov 6 16:36:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_mips16_operands): Replace IPC with cia.
* interp.c (sim_monitor, signal_exception, cache_op, store_fpr,
value_fpr, cop_ld, cop_lw, cop_sw, cop_sd, decode_coproc): Replace
IPC to `cia'.
(UndefinedResult): Replace function with macro/function
combination.
(sim_engine_run): Don't save PC in IPC.
* sim-main.h (IPC): Delete.
start-sanitize-cygnus
* vr5400.igen (vr): Add missing cia argument to value_fpr.
(do_select): Rename function select.
end-sanitize-cygnus
* interp.c (signal_exception, store_word, load_word,
address_translation, load_memory, store_memory, cache_op,
prefetch, sync_operation, ifetch, value_fpr, store_fpr, convert,
cop_lw, cop_ld, cop_sw, cop_sd, decode_coproc, sim_monitor): Add
current instruction address - cia - argument.
(sim_read, sim_write): Call address_translation directly.
(sim_engine_run): Rename variable vaddr to cia.
(signal_exception): Pass cia to sim_monitor
* sim-main.h (SignalException, LoadWord, StoreWord, CacheOp,
Prefetch, SyncOperation, ValueFPR, StoreFPR, Convert, COP_LW,
COP_LD, COP_SW, COP_SD, DecodeCoproc): Update.
* sim-main.h (SignalExceptionSimulatorFault): Delete definition.
* interp.c (sim_open): Replace SignalExceptionSimulatorFault with
SIM_ASSERT.
* interp.c (signal_exception): Pass restart address to
sim_engine_restart.
* Makefile.in (semantics.o, engine.o, support.o, itable.o,
idecode.o): Add dependency.
* sim-main.h (SIM_ENGINE_HALT_HOOK, SIM_ENGINE_RESUME_HOOK):
Delete definitions
(DELAY_SLOT): Update NIA not PC with branch address.
(NULLIFY_NEXT_INSTRUCTION): Set NIA to instruction after next.
* mips.igen: Use CIA not PC in branch calculations.
(illegal): Call SignalException.
(BEQ, ADDIU): Fix assembler.
Wed Nov 5 12:19:56 1997 Andrew Cagney <cagney@b1.cygnus.com>
* m16.igen (JALX): Was missing.
* configure.in (enable-sim-igen): New configuration option.
* configure: Re-generate.
* sim-main.h (MAX_INSNS, INSN_NAME): Define.
* interp.c (load_memory, store_memory): Delete parameter RAW.
(sim_read, sim_write): Use sim_core_{read,write}_buffer directly
bypassing {load,store}_memory.
* sim-main.h (ByteSwapMem): Delete definition.
* Makefile.in (SIM_OBJS): Add sim-memopt module.
* interp.c (sim_do_command, sim_commands): Delete mips specific
commands. Handled by module sim-options.
* sim-main.h (SIM_HAVE_FLATMEM): Undefine, use sim-core.o module.
(WITH_MODULO_MEMORY): Define.
* interp.c (sim_info): Delete code printing memory size.
* interp.c (mips_size): Nee sim_size, delete function.
(power2): Delete.
(monitor, monitor_base, monitor_size): Delete global variables.
(sim_open, sim_close): Delete code creating monitor and other
memory regions. Use sim-memopts module, via sim_do_commandf, to
manage memory regions.
(load_memory, store_memory): Use sim-core for memory model.
* interp.c (address_translation): Delete all memory map code
except line forcing 32 bit addresses.
Wed Nov 5 11:21:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (WITH_TRACE): Delete definition. Enables common
trace options.
* interp.c (logfh, logfile): Delete globals.
(sim_open, sim_close): Delete code opening & closing log file.
(mips_option_handler): Delete -l and -n options.
(OPTION mips_options): Ditto.
* interp.c (OPTION mips_options): Rename option trace to dinero.
(mips_option_handler): Update.
Wed Nov 5 09:35:59 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (fetch_str): New function.
(sim_monitor): Rewrite using sim_read & sim_write.
(sim_open): Check magic number.
(sim_open): Write monitor vectors into memory using sim_write.
(MONITOR_BASE, MONITOR_SIZE, MEM_SIZE): Define.
(sim_read, sim_write): Simplify - transfer data one byte at a
time.
(load_memory, store_memory): Clarify meaning of parameter RAW.
* sim-main.h (isHOST): Defete definition.
(isTARGET): Mark as depreciated.
(address_translation): Delete parameter HOST.
* interp.c (address_translation): Delete parameter HOST.
start-sanitize-tx49
Wed Oct 29 14:21:32 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c: Add tx49 configury and insns.
* configure.in: Add tx49 configury.
* configure: Update.
end-sanitize-tx49
Wed Oct 29 11:13:56 1997 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen:
* Makefile.in (IGEN_INCLUDE): Files included by mips.igen.
(tmp-igen, tmp-m16): Depend on IGEN_INCLUDE.
Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
* mips.igen: Add model filter field to records.
Mon Oct 27 17:53:59 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_NO_CFLAGS): Define. Define WITH_IGEN=0.
interp.c (sim_engine_run): Do not compile function sim_engine_run
when WITH_IGEN == 1.
* configure.in (sim_igen_flags, sim_m16_flags): Set according to
target architecture.
Makefile.in (tmp-igen, tmp-m16): Drop -F and -M options to
igen. Replace with configuration variables sim_igen_flags /
sim_m16_flags.
start-sanitize-r5900
* r5900.igen: New file. Copy r5900 insns here.
end-sanitize-r5900
start-sanitize-cygnus
* vr5400.igen: New file.
end-sanitize-cygnus
* m16.igen: New file. Copy mips16 insns here.
* mips.igen: From here.
Mon Oct 27 13:53:59 1997 Andrew Cagney <cagney@b1.cygnus.com>
start-sanitize-cygnus
* mips.igen: Tag all mipsIV instructions with vr5400 model.
* configure.in: Add mips64vr5400 target.
* configure: Re-generate.
end-sanitize-cygnus
* Makefile.in (SIM_NO_OBJ): Define, move SIM_M16_OBJ, SIM_IGEN_OBJ
to top.
(tmp-igen, tmp-m16): Pass -I srcdir to igen.
Sat Oct 25 16:51:40 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c (build_instruction): Follow sim_write's lead in using
BigEndianMem instead of !ByteSwapMem.
Fri Oct 24 17:41:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (sim_gen): Dependent on target, select type of
generator. Always select old style generator.
configure: Re-generate.
Makefile.in (tmp-igen, tmp-m16, clean-m16, clean-igen): New
targets.
(SIM_M16_CFLAGS, SIM_M16_ALL, SIM_M16_OBJ, BUILT_SRC_FROM_M16,
SIM_IGEN_CFLAGS, SIM_IGEN_ALL, SIM_IGEN_OBJ, BUILT_SRC_FROM_IGEN,
IGEN_TRACE, IGEN_INSN, IGEN_DC): Define
(SIM_EXTRA_CFLAGS, SIM_EXTRA_ALL, SIM_OBJS): Add member
SIM_@sim_gen@_*, set by autoconf.
Wed Oct 22 12:52:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (NULLIFY_NEXT_INSTRUCTION, DELAY_SLOT): Define.
* interp.c (ColdReset): Remove #ifdef HASFPU, check
CURRENT_FLOATING_POINT instead.
* interp.c (ifetch32): New function. Fetch 32 bit instruction.
(address_translation): Raise exception InstructionFetch when
translation fails and isINSTRUCTION.
* interp.c (sim_open, sim_write, sim_monitor, store_word,
sim_engine_run): Change type of of vaddr and paddr to
address_word.
(address_translation, prefetch, load_memory, store_memory,
cache_op): Change type of vAddr and pAddr to address_word.
* gencode.c (build_instruction): Change type of vaddr and paddr to
address_word.
Mon Oct 20 15:29:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (ALU64_END, ALU32_END): Use ALU*_OVERFLOW_RESULT
macro to obtain result of ALU op.
Tue Oct 21 17:39:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_info): Call profile_print.
Mon Oct 20 13:31:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_OBJS): Add sim-profile.o module.
* sim-main.h (WITH_PROFILE): Do not define, defined in
common/sim-config.h. Use sim-profile module.
(simPROFILE): Delete defintion.
* interp.c (PROFILE): Delete definition.
(mips_option_handler): Delete 'p', 'y' and 'x' profile options.
(sim_close): Delete code writing profile histogram.
(mips_set_profile, mips_set_profile_size, writeout16, writeout32):
Delete.
(sim_engine_run): Delete code profiling the PC.
Mon Oct 20 13:31:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (SIGNEXTEND): Force type of result to unsigned_word.
* interp.c (sim_monitor): Make register pointers of type
unsigned_word*.
* sim-main.h: Make registers of type unsigned_word not
signed_word.
Thu Oct 16 10:31:39 1997 Andrew Cagney <cagney@b1.cygnus.com>
start-sanitize-r5900
* sim-main.h (BYTES_IN_MMI_REGS, ..., SUB_REG_FETCH, ..., GPR_SB,
...): Move to sim-main.h
end-sanitize-r5900
* interp.c (sync_operation): Rename from SyncOperation, make
global, add SD argument.
(prefetch): Rename from Prefetch, make global, add SD argument.
(decode_coproc): Make global.
* sim-main.h (SyncOperation, DecodeCoproc, Pefetch): Define.
* gencode.c (build_instruction): Generate DecodeCoproc not
decode_coproc calls.
* interp.c (SETFCC, GETFCC, PREVCOC1): Move to sim-main.h
(SizeFGR): Move to sim-main.h
(simHALTEX, simHALTIN, simTRACE, simPROFILE, simDELAYSLOT,
simSIGINT, simJALDELAYSLOT): Move to sim-main.h
(FP_FLAGS, FP_ENABLE, FP_CAUSE, IR, UF, OF, DZ, IO, UO): Move to
sim-main.h.
(FP_FS, FP_MASK_RM, FP_SH_RM, FP_RM_NEAREST, FP_RM_TOPINF,
FP_RM_TOMINF, GETRM): Move to sim-main.h.
(Uncached, CachedNoncoherent, CachedCoherent, Cached,
isINSTRUCTION, ..., AccessLength_BYTE, ...): Move to sim-main.h.
(UserMode, BigEndianMem, ByteSwapMem, ReverseEndian,
BigEndianCPU, status_KSU_mask, ...). Moved to sim-main.h
* sim-main.h (ALU32_END, ALU64_END): Define. When overflow raise
exception.
(sim-alu.h): Include.
(NULLIFY_NIA, NULL_CIA, CPU_CIA): Define.
(sim_cia): Typedef to instruction_address.
Thu Oct 16 10:31:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (interp.o): Rename generated file engine.c to
oengine.c.
* interp.c: Update.
Thu Oct 16 10:31:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_instruction): Use FPR_STATE not fpr_state.
Thu Oct 16 10:31:39 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_instruction): For "FPSQRT", output correct
number of arguments to Recip.
Tue Oct 14 17:38:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (interp.o): Depends on sim-main.h
* interp.c (mips16_entry, ColdReset,dotrace): Add SD argument. Use GPR not registers.
* sim-main.h (sim_cpu): Add registers, register_widths, fpr_state,
ipc, dspc, pending_*, hiaccess, loaccess, state, dsstate fields.
(REGISTERS, REGISTER_WIDTHS, FPR_STATE, IPC, DSPC, PENDING_*,
STATE, DSSTATE): Define
(GPR, FGRIDX, ..): Define.
* interp.c (registers, register_widths, fpr_state, ipc, dspc,
pending_*, hiaccess, loaccess, state, dsstate): Delete globals.
(GPR, FGRIDX, ...): Delete macros.
* interp.c: Update names to match defines from sim-main.h
Tue Oct 14 15:11:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_monitor): Add SD argument.
(sim_warning): Delete. Replace calls with calls to
sim_io_eprintf.
(sim_error): Delete. Replace calls with sim_io_error.
(open_trace, writeout32, writeout16, getnum): Add SD argument.
(mips_set_profile): Rename from sim_set_profile. Add SD argument.
(mips_set_profile_size): Rename from sim_set_profile_size. Add SD
argument.
(mips_size): Rename from sim_size. Add SD argument.
* interp.c (simulator): Delete global variable.
(callback): Delete global variable.
(mips_option_handler, sim_open, sim_write, sim_read,
sim_store_register, sim_fetch_register, sim_info, sim_do_command,
sim_size,sim_monitor): Use sim_io_* not callback->*.
(sim_open): ZALLOC simulator struct.
(PROFILE): Do not define.
Tue Oct 14 13:35:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open), support.h: Replace CHECKSIM macro found in
support.h with corresponding code.
* sim-main.h (word64, uword64), support.h: Move definition to
sim-main.h.
(WORD64LO, WORD64HI, SET64LO, SET64HI, WORD64, UWORD64): Ditto.
* support.h: Delete
* Makefile.in: Update dependencies
* interp.c: Do not include.
Tue Oct 14 13:35:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (address_translation, load_memory, store_memory,
cache_op): Rename to from AddressTranslation et.al., make global,
add SD argument
* sim-main.h (AddressTranslation, LoadMemory, StoreMemory,
CacheOp): Define.
* interp.c (SignalException): Rename to signal_exception, make
global.
* interp.c (Interrupt, ...): Move definitions to sim-main.h.
* sim-main.h (SignalException, SignalExceptionInterrupt,
SignalExceptionInstructionFetch, SignalExceptionAddressStore,
SignalExceptionAddressLoad, SignalExceptionSimulatorFault,
SignalExceptionIntegerOverflow, SignalExceptionCoProcessorUnusable):
Define.
* interp.c, support.h: Use.
Tue Oct 14 13:19:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (ValueFPR, StoreFPR), sim-main.h: Make global, rename
to value_fpr / store_fpr. Add SD argument.
(NaN, Infinity, Less, Equal, AbsoluteValue, Negate, Add, Sub,
Multiply, Divide, Recip, SquareRoot, Convert): Make global.
* sim-main.h (ValueFPR, StoreFPR): Define.
Tue Oct 14 13:06:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_engine_run): Check consistency between configure
WITH_TARGET_WORD_BITSIZE and WITH_FLOATING_POINT and gensim GPRLEN
and HASFPU.
* configure.in (mips_bitsize): Configure WITH_TARGET_WORD_BITSIZE.
(mips_fpu): Configure WITH_FLOATING_POINT.
(mips_endian): Configure WITH_TARGET_ENDIAN.
* configure: Update.
Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
start-sanitize-r5900
Mon Aug 25 19:11:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (MAX_REG): Allow up-to 128 registers.
(LO1, HI1): Define value that matches REGISTER_NAMES in gdb.
(REGISTER_SA): Ditto.
(sim_open): Initialize register_widths for r5900 specific
registers.
(sim_fetch_register, sim_store_register): Check for request of
r5900 specific SA register. Check for request for hi 64 bits of
r5900 specific registers.
end-sanitize-r5900
Mon Sep 29 14:45:00 1997 Bob Manson <manson@charmed.cygnus.com>
* configure: Regenerated.
Fri Sep 26 12:48:18 1997 Mark Alexander <marka@cygnus.com>
* interp.c: Allow Debug, DEPC, and EPC registers to be examined in GDB.
Thu Sep 25 11:15:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (print_igen_insn_models): Assume certain architectures
include all mips* instructions.
(print_igen_insn_format): Use data_size==-1 as marker for MIPS16
instruction.
* Makefile.in (tmp.igen): Add target. Generate igen input from
gencode file.
* gencode.c (FEATURE_IGEN): Define.
(main): Add --igen option. Generate output in igen format.
(process_instructions): Format output according to igen option.
(print_igen_insn_format): New function.
(print_igen_insn_models): New function.
(process_instructions): Only issue warnings and ignore
instructions when no FEATURE_IGEN.
Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (COP_SD, COP_LD): Add UNUSED to pacify GCC for some
MIPS targets.
Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_ALIGNMENT, SIM_ENDIAN, SIM_HOSTENDIAN,
SIM_RESERVED_BITS): Delete, moved to common.
(SIM_EXTRA_CFLAGS): Update.
Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in: Configure non-strict memory alignment.
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sat Sep 20 14:07:28 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c (SDBBP,DERET): Added (3900) insns.
(RFE): Turn on for 3900.
* interp.c (DebugBreakPoint,DEPC,Debug,Debug_*): Added.
(dsstate): Made global.
(SUBTARGET_R3900): Added.
(CANCELDELAYSLOT): New.
(SignalException): Ignore SystemCall rather than ignore and
terminate. Add DebugBreakPoint handling.
(decode_coproc): New insns RFE, DERET; and new registers Debug
and DEPC protected by SUBTARGET_R3900.
(sim_engine_run): Use CANCELDELAYSLOT rather than clearing
bits explicitly.
* Makefile.in,configure.in: Add mips subtarget option.
* configure: Update.
Fri Sep 19 09:33:27 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c: Add r3900 (tx39).
start-sanitize-tx19
* gencode.c: Fix some configuration problems by improving
the relationship between tx19 and tx39.
end-sanitize-tx19
Tue Sep 16 15:52:04 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c (build_instruction): Don't need to subtract 4 for
JALR, just 2.
Tue Sep 16 11:32:28 1997 Gavin Koch <gavin@cygnus.com>
* interp.c: Correct some HASFPU problems.
Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Sep 12 12:01:39 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (mips_options): Fix samples option short form, should
be `x'.
Thu Sep 11 09:35:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_info): Enable info code. Was just returning.
Tue Sep 9 17:30:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (decode_coproc): Clarify warning about unsuported MTC0,
MFC0.
Tue Sep 9 16:28:28 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_instruction): Use SIGNED64 for 64 bit
constants.
(build_instruction): Ditto for LL.
start-sanitize-tx19
Sun Sep 7 16:05:46 1997 Gavin Koch <gavin@cygnus.com>
* mips/configure.in, mips/gencode: Add tx19/r1900.
end-sanitize-tx19
Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
* configure: Regenerated to track ../common/aclocal.m4 changes.
start-sanitize-r5900
Mon Sep 1 18:43:30 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_instruction): For "pabsw" and "pabsh", check
for overflow due to ABS of MININT, set result to MAXINT.
(build_instruction): For "psrlvw", signextend bit 31.
end-sanitize-r5900
Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Wed Aug 27 14:12:27 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Add call to sim_analyze_program, update
call to sim_config.
Tue Aug 26 10:40:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_kill): Delete.
(sim_create_inferior): Add ABFD argument. Set PC from same.
(sim_load): Move code initializing trap handlers from here.
(sim_open): To here.
(sim_load): Delete, use sim-hload.c.
* Makefile.in (SIM_OBJS): Add sim-hload.o module.
Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Mon Aug 25 15:59:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Add ABFD argument.
(sim_load): Move call to sim_config from here.
(sim_open): To here. Check return status.
start-sanitize-r5900
* gencode.c (build_instruction): Do not define x8000000000000000,
x7FFFFFFFFFFFFFFF, or xFFFFFFFF80000000.
end-sanitize-r5900
start-sanitize-r5900
Mon Jul 28 19:49:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_instruction): For "pdivw", "pdivbw" and
"pdivuw" check for overflow due to signed divide by -1.
end-sanitize-r5900
Fri Jul 25 15:00:45 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c (build_instruction): Two arg MADD should
not assign result to $0.
start-sanitize-r5900
Thu Jul 10 11:58:48 1997 Andrew Cagney <cagney@critters.cygnus.com>
* gencode.c (build_instruction): For "ppac5" use unsigned
arrithmetic so that the sign bit doesn't smear when right shifted.
(build_instruction): For "pdiv" perform sign extension when
storing results in HI and LO.
(build_instructions): For "pdiv" and "pdivbw" check for
divide-by-zero.
(build_instruction): For "pmfhl.slw" update hi part of dest
register as well as low part.
(build_instruction): For "pmfhl" portably handle long long values.
(build_instruction): For "pmfhl.sh" correctly negative values.
Store half words 2 and three in the correct place.
(build_instruction): For "psllvw", sign extend value after shift.
end-sanitize-r5900
Thu Jun 26 12:13:17 1997 Angela Marie Thomas (angela@cygnus.com)
* sim/mips/configure: Change default_sim_endian to 0 (bi-endian)
* sim/mips/configure.in: Regenerate.
Wed Jul 9 10:29:21 1997 Andrew Cagney <cagney@critters.cygnus.com>
* interp.c (SUB_REG_UW, SUB_REG_SW, SUB_REG_*): Use more explicit
signed8, unsigned8 et.al. types.
start-sanitize-r5900
* gencode.c (build_instruction): For PMULTU* do not sign extend
registers. Make generated code easier to debug.
end-sanitize-r5900
* interp.c (SUB_REG_FETCH): Handle both little and big endian
hosts when selecting subreg.
start-sanitize-r5900
Tue Jul 8 18:07:20 1997 Andrew Cagney <cagney@andros.cygnus.com>
* gencode.c (type_for_data_len): For 32bit operations concerned
with overflow, perform op using 64bits.
(build_instruction): For PADD, always compute operation using type
returned by type_for_data_len.
(build_instruction): For PSUBU, when overflow, saturate to zero as
actually underflow.
end-sanitize-r5900
Wed Jul 2 11:54:10 1997 Jeffrey A Law (law@cygnus.com)
start-sanitize-r5900
* gencode.c (build_instruction): Handle "pext5" according to
version 1.95 of the r5900 ISA.
* gencode.c (build_instruction): Handle "ppac5" according to
version 1.95 of the r5900 ISA.
end-sanitize-r5900
* interp.c (sim_engine_run): Reset the ZERO register to zero
regardless of FEATURE_WARN_ZERO.
* gencode.c (FEATURE_WARNINGS): Remove FEATURE_WARN_ZERO.
Wed Jun 4 10:43:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (decode_coproc): Implement MTC0 N, CAUSE.
(SignalException): For BreakPoints ignore any mode bits and just
save the PC.
(SignalException): Always set the CAUSE register.
Tue Jun 3 05:00:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (SignalException): Clear the simDELAYSLOT flag when an
exception has been taken.
* interp.c: Implement the ERET and mt/f sr instructions.
start-sanitize-r5900
Mon Jun 2 23:28:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gencode.c (build_instruction): For paddu, extract unsigned
sub-fields.
* gencode.c (build_instruction): Saturate padds instead of padd
instructions.
end-sanitize-r5900
Sat May 31 00:44:16 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (SignalException): Don't bother restarting an
interrupt.
Fri May 30 23:41:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (SignalException): Really take an interrupt.
(interrupt_event): Only deliver interrupts when enabled.
Tue May 27 20:08:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_info): Only print info when verbose.
(sim_info) Use sim_io_printf for output.
Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (CoProcPresent): Add UNUSED attribute - not used by all
mips architectures.
Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_do_command): Check for common commands if a
simulator specific command fails.
Thu May 22 09:32:03 1997 Gavin Koch <gavin@cygnus.com>
* interp.c (sim_engine_run): ifdef out uses of simSTOP, simSTEP
and simBE when DEBUG is defined.
Wed May 21 09:08:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (interrupt_event): New function. Pass exception event
onto exception handler.
* configure.in: Check for stdlib.h.
* configure: Regenerate.
* gencode.c (build_instruction): Add UNUSED attribute to tempS
variable declaration.
(build_instruction): Initialize memval1.
(build_instruction): Add UNUSED attribute to byte, bigend,
reverse.
(build_operands): Ditto.
* interp.c: Fix GCC warnings.
(sim_get_quit_code): Delete.
* configure.in: Add INLINE, ENDIAN, HOSTENDIAN and WARNINGS.
* Makefile.in: Ditto.
* configure: Re-generate.
* Makefile.in (SIM_OBJS): Add sim-watch.o module.
Tue May 20 15:08:56 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (mips_option_handler): New function parse argumes using
sim-options.
(myname): Replace with STATE_MY_NAME.
(sim_open): Delete check for host endianness - performed by
sim_config.
(simHOSTBE, simBE): Delete, replaced by sim-endian flags.
(sim_open): Move much of the initialization from here.
(sim_load): To here. After the image has been loaded and
endianness set.
(sim_open): Move ColdReset from here.
(sim_create_inferior): To here.
(sim_open): Make FP check less dependant on host endianness.
* Makefile.in (SIM_RUN_OBJS): Set to nrun.o - use new version or
run.
* interp.c (sim_set_callbacks): Delete.
* interp.c (membank, membank_base, membank_size): Replace with
STATE_MEMORY, STATE_MEM_SIZE, STATE_MEM_BASE.
(sim_open): Remove call to callback->init. gdb/run do this.
* interp.c: Update
* sim-main.h (SIM_HAVE_FLATMEM): Define.
* interp.c (big_endian_p): Delete, replaced by
current_target_byte_order.
Tue May 20 13:55:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (host_read_long, host_read_word, host_swap_word,
host_swap_long): Delete. Using common sim-endian.
(sim_fetch_register, sim_store_register): Use H2T.
(pipeline_ticks): Delete. Handled by sim-events.
(sim_info): Update.
(sim_engine_run): Update.
Tue May 20 13:42:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_stop_reason): Move code determining simEXCEPTION
reason from here.
(SignalException): To here. Signal using sim_engine_halt.
(sim_stop_reason): Delete, moved to common.
Tue May 20 10:19:48 1997 Andrew Cagney <cagney@b2.cygnus.com>
* interp.c (sim_open): Add callback argument.
(sim_set_callbacks): Delete SIM_DESC argument.
(sim_size): Ditto.
Mon May 19 18:20:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_OBJS): Add common modules.
* interp.c (sim_set_callbacks): Also set SD callback.
(set_endianness, xfer_*, swap_*): Delete.
(host_read_word, host_read_long, host_swap_word, host_swap_long):
Change to functions using sim-endian macros.
(control_c, sim_stop): Delete, use common version.
(simulate): Convert into.
(sim_engine_run): This function.
(sim_resume): Delete.
* interp.c (simulation): New variable - the simulator object.
(sim_kind): Delete global - merged into simulation.
(sim_load): Cleanup. Move PC assignment from here.
(sim_create_inferior): To here.
* sim-main.h: New file.
* interp.c (sim-main.h): Include.
Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Apr 23 17:32:19 1997 Doug Evans <dje@canuck.cygnus.com>
* tconfig.in (SIM_HAVE_BIENDIAN): Define.
Mon Apr 21 17:16:13 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c (build_instruction): DIV instructions: check
for division by zero and integer overflow before using
host's division operation.
Thu Apr 17 03:18:14 1997 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (SIM_OBJS): Add sim-load.o.
* interp.c: #include bfd.h.
(target_byte_order): Delete.
(sim_kind, myname, big_endian_p): New static locals.
(sim_open): Set sim_kind, myname. Move call to set_endianness to
after argument parsing. Recognize -E arg, set endianness accordingly.
(sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
load file into simulator. Set PC from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
(set_endianness): Use big_endian_p instead of target_byte_order.
Wed Apr 16 17:55:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_size): Delete prototype - conflicts with
definition in remote-sim.h. Correct definition.
Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (sim_open): New arg `kind'.
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Mar 25 11:38:22 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (sim_open): Set optind to 0 before calling getopt.
Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Mar 17 10:52:59 1997 Gavin Koch <gavin@cetus.cygnus.com>
* interp.c : Replace uses of pr_addr with pr_uword64
where the bit length is always 64 independent of SIM_ADDR.
(pr_uword64) : added.
Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Re-generate.
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
Thu Mar 13 12:51:36 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (sim_open): New SIM_DESC result. Argument is now
in argv form.
(other sim_*): New SIM_DESC argument.
start-sanitize-r5900
Wed Feb 26 18:32:21 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c (POP_AND,POP_OR,POP_NOR,POP_XOR):
Change values to avoid overloading DOUBLEWORD which is tested
for all insns.
* gencode.c: reinstate "offending code".
end-sanitize-r5900
Mon Feb 24 22:47:14 1997 Dawn Perchik <dawn@cygnus.com>
* interp.c: Fix printing of addresses for non-64-bit targets.
(pr_addr): Add function to print address based on size.
start-sanitize-r5900
* gencode.c: #ifdef out offending code until a permanent fix
can be added. Code is causing build errors for non-5900 mips targets.
end-sanitize-r5900
start-sanitize-r5900
Thu Feb 20 10:40:24 1997 Gavin Koch <gavin@cetus.cygnus.com>
* gencode.c (process_instructions): Correct test for ISA dependent
architecture bits in isa field of MIPS_DECODE.
end-sanitize-r5900
Wed Feb 19 14:42:09 1997 Mark Alexander <marka@cygnus.com>
* interp.c (simopen): Add support for LSI MiniRISC PMON vectors.
start-sanitize-r5900
Tue Feb 18 17:03:47 1997 Gavin Koch <gavin@cygnus.com>
* gencode.c (MIPS_DECODE): Correct instruction feature flags for
PMADDUW.
end-sanitize-r5900
Thu Feb 13 14:08:30 1997 Ian Lance Taylor <ian@cygnus.com>
* gencode.c (build_mips16_operands): Correct computation of base
address for extended PC relative instruction.
start-sanitize-r5900
Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
* Makefile.in, configure, configure.in, gencode.c,
interp.c, support.h: add r5900.
end-sanitize-r5900
Thu Feb 6 17:16:15 1997 Ian Lance Taylor <ian@cygnus.com>
* interp.c (mips16_entry): Add support for floating point cases.
(SignalException): Pass floating point cases to mips16_entry.
(ValueFPR): Don't restrict fmt_single and fmt_word to even
registers.
(StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single
or fmt_word.
(COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR,
and then set the state to fmt_uninterpreted.
(COP_SW): Temporarily set the state to fmt_word while calling
ValueFPR.
Tue Feb 4 16:48:25 1997 Ian Lance Taylor <ian@cygnus.com>
* gencode.c (build_instruction): The high order may be set in the
comparison flags at any ISA level, not just ISA 4.
Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (@COMMON_MAKEFILE_FRAG): Use
COMMON_{PRE,POST}_CONFIG_FRAG instead.
* configure.in: sinclude ../common/aclocal.m4.
* configure: Regenerated.
Fri Jan 31 11:11:45 1997 Ian Lance Taylor <ian@cygnus.com>
* configure: Rebuild after change to aclocal.m4.
Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
* configure configure.in Makefile.in: Update to new configure
scheme which is more compatible with WinGDB builds.
* configure.in: Improve comment on how to run autoconf.
* configure: Re-run autoconf to get new ../common/aclocal.m4.
* Makefile.in: Use autoconf substitution to install common
makefile fragment.
Wed Jan 8 12:39:03 1997 Jim Wilson <wilson@cygnus.com>
* gencode.c (build_instruction): Use BigEndianCPU instead of
ByteSwapMem.
Thu Jan 02 22:23:04 1997 Mark Alexander <marka@cygnus.com>
* interp.c (sim_monitor): Make output to stdout visible in
wingdb's I/O log window.
Tue Dec 31 07:04:00 1996 Mark Alexander <marka@cygnus.com>
* support.h: Undo previous change to SIGTRAP
and SIGQUIT values.
Mon Dec 30 17:36:06 1996 Ian Lance Taylor <ian@cygnus.com>
* interp.c (store_word, load_word): New static functions.
(mips16_entry): New static function.
(SignalException): Look for mips16 entry and exit instructions.
(simulate): Use the correct index when setting fpr_state after
doing a pending move.
Sun Dec 29 09:37:18 1996 Mark Alexander <marka@cygnus.com>
* interp.c: Fix byte-swapping code throughout to work on
both little- and big-endian hosts.
Sun Dec 29 09:18:32 1996 Mark Alexander <marka@cygnus.com>
* support.h: Make definitions of SIGTRAP and SIGQUIT consistent
with gdb/config/i386/xm-windows.h.
Fri Dec 27 22:48:51 1996 Mark Alexander <marka@cygnus.com>
* gencode.c (build_instruction): Work around MSVC++ code gen bug
that messes up arithmetic shifts.
Fri Dec 20 11:04:05 1996 Stu Grossman (grossman@critters.cygnus.com)
* support.h: Use _WIN32 instead of __WIN32__. Also add defs for
SIGTRAP and SIGQUIT for _WIN32.
Thu Dec 19 14:07:27 1996 Ian Lance Taylor <ian@cygnus.com>
* gencode.c (build_instruction) [MUL]: Cast operands to word64, to
force a 64 bit multiplication.
(build_instruction) [OR]: In mips16 mode, don't do anything if the
destination register is 0, since that is the default mips16 nop
instruction.
Mon Dec 16 14:59:38 1996 Ian Lance Taylor <ian@cygnus.com>
* gencode.c (MIPS16_DECODE): SWRASP is I8, not RI.
(build_endian_shift): Don't check proc64.
(build_instruction): Always set memval to uword64. Cast op2 to
uword64 when shifting it left in memory instructions. Always use
the same code for stores--don't special case proc64.
* gencode.c (build_mips16_operands): Fix base PC value for PC
relative operands.
(build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a
jal instruction.
* interp.c (simJALDELAYSLOT): Define.
(JALDELAYSLOT): Define.
(INDELAYSLOT, INJALDELAYSLOT): Define.
(simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared.
Tue Dec 24 22:11:20 1996 Angela Marie Thomas (angela@cygnus.com)
* interp.c (sim_open): add flush_cache as a PMON routine
(sim_monitor): handle flush_cache by ignoring it
Wed Dec 11 13:53:51 1996 Jim Wilson <wilson@cygnus.com>
* gencode.c (build_instruction): Use !ByteSwapMem instead of
BigEndianMem.
* interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete.
(BigEndianMem): Rename to ByteSwapMem and change sense.
(BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change
BigEndianMem references to !ByteSwapMem.
(set_endianness): New function, with prototype.
(sim_open): Call set_endianness.
(sim_info): Use simBE instead of BigEndianMem.
(xfer_direct_word, xfer_direct_long, swap_direct_word,
swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word,
xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER
ifdefs, keeping the prototype declaration.
(swap_word): Rewrite correctly.
(ColdReset): Delete references to CONFIG. Delete endianness related
code; moved to set_endianness.
Tue Dec 10 11:32:04 1996 Jim Wilson <wilson@cygnus.com>
* gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
* interp.c (CHECKHILO): Define away.
(simSIGINT): New macro.
(membank_size): Increase from 1MB to 2MB.
(control_c): New function.
(sim_resume): Rename parameter signal to signal_number. Add local
variable prev. Call signal before and after simulate.
(sim_stop_reason): Add simSIGINT support.
(sim_warning, sim_error, dotrace, SignalException): Define as stdarg
functions always.
(sim_warning): Delete call to SignalException. Do call printf_filtered
if logfh is NULL.
(AddressTranslation): Add #ifdef DEBUG around debugging message and
a call to sim_warning.
Wed Nov 27 11:53:50 1996 Ian Lance Taylor <ian@cygnus.com>
* gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD
16 bit instructions.
Tue Nov 26 11:53:12 1996 Ian Lance Taylor <ian@cygnus.com>
Add support for mips16 (16 bit MIPS implementation):
* gencode.c (inst_type): Add mips16 instruction encoding types.
(GETDATASIZEINSN): Define.
(MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add
jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and
mtlo.
(MIPS16_DECODE): New table, for mips16 instructions.
(bitmap_val): New static function.
(struct mips16_op): Define.
(mips16_op_table): New table, for mips16 operands.
(build_mips16_operands): New static function.
(process_instructions): If PC is odd, decode a mips16
instruction. Break out instruction handling into new
build_instruction function.
(build_instruction): New static function, broken out of
process_instructions. Check modifiers rather than flags for SHIFT
bit count and m[ft]{hi,lo} direction.
(usage): Pass program name to fprintf.
(main): Remove unused variable this_option_optind. Change
``*loptarg++'' to ``loptarg++''.
(my_strtoul): Parenthesize && within ||.
* interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd.
(simulate): If PC is odd, fetch a 16 bit instruction, and
increment PC by 2 rather than 4.
* configure.in: Add case for mips16*-*-*.
* configure: Rebuild.
Fri Nov 22 08:49:36 1996 Mark Alexander <marka@cygnus.com>
* interp.c: Allow -t to enable tracing in standalone simulator.
Fix garbage output in trace file and error messages.
Wed Nov 20 01:54:37 1996 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in: Delete stuff moved to ../common/Make-common.in.
(SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
* configure: Regenerated.
* tconfig.in: New file.
Tue Nov 12 13:34:00 1996 Dawn Perchik <dawn@cygnus.com>
* interp.c: Fix bugs in 64-bit port.
Use ansi function declarations for msvc compiler.
Initialize and test file pointer in trace code.
Prevent duplicate definition of LAST_EMED_REGNUM.
Tue Oct 15 11:07:06 1996 Mark Alexander <marka@cygnus.com>
* interp.c (xfer_big_long): Prevent unwanted sign extension.
Thu Sep 26 17:35:00 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c (SignalException): Check for explicit terminating
breakpoint value.
* gencode.c: Pass instruction value through SignalException()
calls for Trap, Breakpoint and Syscall.
Thu Sep 26 11:35:17 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is
only used on those hosts that provide it.
* configure.in: Add sqrt() to list of functions to be checked for.
* config.in: Re-generated.
* configure: Re-generated.
Fri Sep 20 15:47:12 1996 Ian Lance Taylor <ian@cygnus.com>
* gencode.c (process_instructions): Call build_endian_shift when
expanding STORE RIGHT, to fix swr.
* support.h (SIGNEXTEND): If the sign bit is not set, explicitly
clear the high bits.
* interp.c (Convert): Fix fmt_single to fmt_long to not truncate.
Fix float to int conversions to produce signed values.
Thu Sep 19 15:34:17 1996 Ian Lance Taylor <ian@cygnus.com>
* gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction.
(process_instructions): Correct handling of nor instruction.
Correct shift count for 32 bit shift instructions. Correct sign
extension for arithmetic shifts to not shift the number of bits in
the type. Fix 64 bit multiply high word calculation. Fix 32 bit
unsigned multiply. Fix ldxc1 and friends to use coprocessor 1.
Fix madd.
* interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC.
It's OK to have a mult follow a mult. What's not OK is to have a
mult follow an mfhi.
(Convert): Comment out incorrect rounding code.
Mon Sep 16 11:38:16 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c (sim_monitor): Improved monitor printf
simulation. Tidied up simulator warnings, and added "--log" option
for directing warning message output.
* gencode.c: Use sim_warning() rather than WARNING macro.
Thu Aug 22 15:03:12 1996 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (gencode): Depend upon gencode.o, getopt.o, and
getopt1.o, rather than on gencode.c. Link objects together.
Don't link against -liberty.
(gencode.o, getopt.o, getopt1.o): New targets.
* gencode.c: Include <ctype.h> and "ansidecl.h".
(AND): Undefine after including "ansidecl.h".
(ULONG_MAX): Define if not defined.
(OP_*): Don't define macros; now defined in opcode/mips.h.
(main): Call my_strtoul rather than strtoul.
(my_strtoul): New static function.
Wed Jul 17 18:12:38 1996 Stu Grossman (grossman@critters.cygnus.com)
* gencode.c (process_instructions): Generate word64 and uword64
instead of `long long' and `unsigned long long' data types.
* interp.c: #include sysdep.h to get signals, and define default
for SIGBUS.
* (Convert): Work around for Visual-C++ compiler bug with type
conversion.
* support.h: Make things compile under Visual-C++ by using
__int64 instead of `long long'. Change many refs to long long
into word64/uword64 typedefs.
Wed Jun 26 12:24:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
* Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
(docdir): Removed.
* configure.in (AC_PREREQ): autoconf 2.5 or higher.
(AC_PROG_INSTALL): Added.
(AC_PROG_CC): Moved to before configure.host call.
* configure: Rebuilt.
Wed Jun 5 08:28:13 1996 James G. Smith <jsmith@cygnus.co.uk>
* configure.in: Define @SIMCONF@ depending on mips target.
* configure: Rebuild.
* Makefile.in (run): Add @SIMCONF@ to control simulator
construction.
* gencode.c: Change LOADDRMASK to 64bit memory model only.
* interp.c: Remove some debugging, provide more detailed error
messages, update memory accesses to use LOADDRMASK.
Mon Jun 3 11:55:03 1996 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS,
AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set
stamp-h.
* configure: Rebuild.
* config.in: New file, generated by autoheader.
* interp.c: Include "config.h". Include <stdlib.h>, <string.h>,
and <strings.h> if they exist. Replace #ifdef sun with #ifdef
HAVE_ANINT and HAVE_AINT, as appropriate.
* Makefile.in (run): Use @LIBS@ rather than -lm.
(interp.o): Depend upon config.h.
(Makefile): Just rebuild Makefile.
(clean): Remove stamp-h.
(mostlyclean): Make the same as clean, not as distclean.
(config.h, stamp-h): New targets.
Fri May 10 00:41:17 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c (ColdReset): Fix boolean test. Make all simulator
globals static.
Wed May 8 15:12:58 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c (xfer_direct_word, xfer_direct_long,
swap_direct_word, swap_direct_long, xfer_big_word,
xfer_big_long, xfer_little_word, xfer_little_long,
swap_word,swap_long): Added.
* interp.c (ColdReset): Provide function indirection to
host<->simulated_target transfer routines.
* interp.c (sim_store_register, sim_fetch_register): Updated to
make use of indirected transfer routines.
Fri Apr 19 15:48:24 1996 James G. Smith <jsmith@cygnus.co.uk>
* gencode.c (process_instructions): Ensure FP ABS instruction
recognised.
* interp.c (AbsoluteValue): Add routine. Also provide simple PMON
system call support.
Wed Apr 10 09:51:38 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c (sim_do_command): Complain if callback structure not
initialised.
Thu Mar 28 13:50:51 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c (Convert): Provide round-to-nearest and round-to-zero
support for Sun hosts.
* Makefile.in (gencode): Ensure the host compiler and libraries
used for cross-hosted build.
Wed Mar 27 14:42:12 1996 James G. Smith <jsmith@cygnus.co.uk>
* interp.c, gencode.c: Some more (TODO) tidying.
Thu Mar 7 11:19:33 1996 James G. Smith <jsmith@cygnus.co.uk>
* gencode.c, interp.c: Replaced explicit long long references with
WORD64HI, WORD64LO, SET64HI and SET64LO macro calls.
* support.h (SET64LO, SET64HI): Macros added.
Wed Feb 21 12:16:21 1996 Ian Lance Taylor <ian@cygnus.com>
* configure: Regenerate with autoconf 2.7.
Tue Jan 30 08:48:18 1996 Fred Fish <fnf@cygnus.com>
* interp.c (LoadMemory): Enclose text following #endif in /* */.
* support.h: Remove superfluous "1" from #if.
* support.h (CHECKSIM): Remove stray 'a' at end of line.
Mon Dec 4 11:44:40 1995 Jamie Smith <jsmith@cygnus.com>
* interp.c (StoreFPR): Control UndefinedResult() call on
WARN_RESULT manifest.
Fri Dec 1 16:37:19 1995 James G. Smith <jsmith@cygnus.co.uk>
* gencode.c: Tidied instruction decoding, and added FP instruction
support.
* interp.c: Added dineroIII, and BSD profiling support. Also
run-time FP handling.
Sun Oct 22 00:57:18 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
* Changelog, Makefile.in, README.Cygnus, configure, configure.in,
gencode.c, interp.c, support.h: created.
Reference in New Issue View Git Blame Copy Permalink