8bca297856
2018-10-12 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * gdb.trace/actions-changed.exp: Check for arch support. * gdb.trace/actions.exp: Likewise. * gdb.trace/ax.exp: Likewise. * gdb.trace/backtrace.exp: Likewise. * gdb.trace/change-loc.exp: Likewise. * gdb.trace/deltrace.exp: Likewise. * gdb.trace/ftrace-lock.exp: Check for shlib and arch support. * gdb.trace/ftrace.exp: Likewise. * gdb.trace/infotrace.exp: Check for arch support. * gdb.trace/mi-trace-frame-collected.exp: Likewise. * gdb.trace/mi-tracepoint-changed.exp: Likewise. * gdb.trace/mi-tsv-changed.exp: Likewise. * gdb.trace/packetlen.exp: Likewise. * gdb.trace/passc-dyn.exp: Likewise. * gdb.trace/passcount.exp: Likewise. * gdb.trace/pending.exp: Likewise. * gdb.trace/range-stepping.exp: Check for shlib support. * gdb.trace/report.exp: Check for arch support. * gdb.trace/save-trace.exp: Likewise. * gdb.trace/signal.exp: Check for signal support. * gdb.trace/tfind.exp: Check for arch support. * gdb.trace/trace-break.exp: Check for arch and shlib support. * gdb.trace/trace-common.h: Add comment. * gdb.trace/trace-condition.exp: Check for shlib and arch support. * gdb.trace/trace-enable-disable.exp: Likewise. * gdb.trace/trace-mt.exp: Likewise. Remove redundant untested call. * gdb.trace/tracecmd.exp: Check for arch support. * gdb.trace/tspeed.exp: Check for shlib and target support. * gdb.trace/tstatus.exp: Check for arch support. * gdb.trace/tsv.exp: Likewise. * gdb.trace/while-dyn.exp: Likewise. * gdb.trace/while-stepping.exp: Likewise. * lib/trace-support.exp (gdb_trace_common_supports_arch): New.
371 lines
12 KiB
Plaintext
371 lines
12 KiB
Plaintext
# Copyright 1998-2018 Free Software Foundation, Inc.
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
# This file was written by Michael Snyder (msnyder@cygnus.com)
|
|
|
|
load_lib "trace-support.exp"
|
|
|
|
|
|
gdb_exit
|
|
gdb_start
|
|
|
|
standard_testfile actions.c
|
|
|
|
if ![gdb_trace_common_supports_arch] {
|
|
unsupported "no trace-common.h support for arch"
|
|
return -1
|
|
}
|
|
|
|
if { [gdb_compile "$srcdir/$subdir/$srcfile" "$binfile" \
|
|
executable {debug nowarnings}] != "" } {
|
|
untested "failed to compile"
|
|
return -1
|
|
}
|
|
gdb_load $binfile
|
|
gdb_test "tstop" ".*" ""
|
|
gdb_test "tfind none" ".*" ""
|
|
|
|
# 6.2 test help tstart
|
|
gdb_test "help tstart" \
|
|
"Start trace data collection\.\[\r\n\]+Usage: tstart \\\[NOTES\\\]\.\.\.\[\r\n\]+Any arguments supplied are recorded with the trace as a note and\[\r\n\]+reported by tstatus \\(if the target supports trace notes\\)\." \
|
|
"6.2: help tstart"
|
|
# 7.2 test help tstop
|
|
gdb_test "help tstop" \
|
|
"Stop trace data collection\.\[\r\n\]+Usage: tstop \\\[NOTES\\\]\.\.\.\[\r\n\]+Any arguments supplied are recorded with the trace as a stop reason and\[\r\n\]+reported by tstatus \\(if the target supports trace notes\\)\." \
|
|
"7.2: help tstop"
|
|
|
|
# 8.38 test help tfind
|
|
gdb_test "help tfind" "Select a trace frame.*" \
|
|
"8.38: help tfind"
|
|
gdb_test "help tfind pc" "Select a trace frame by PC.*" \
|
|
"8.38: help tfind PC"
|
|
gdb_test "help tfind end" "De-select any trace frame.*" \
|
|
"8.38: help tfind end"
|
|
gdb_test "help tfind none" "De-select any trace frame.*" \
|
|
"8.38: help tfind none"
|
|
gdb_test "help tfind line" "Select a trace frame by source line.*" \
|
|
"8.38: help tfind line"
|
|
gdb_test "help tfind start" "Select the first trace frame.*" \
|
|
"8.38: help tfind start"
|
|
gdb_test "help tfind range" "Select a trace frame whose PC is in.*" \
|
|
"8.38: help tfind range"
|
|
gdb_test "help tfind trace" "Select a trace frame by tracepoint number.*" \
|
|
"8.38: help tfind tracepoint"
|
|
|
|
runto_main
|
|
gdb_reinitialize_dir $srcdir/$subdir
|
|
|
|
if { ![gdb_target_supports_trace] } then {
|
|
unsupported "current target does not support trace"
|
|
return 1
|
|
|
|
}
|
|
|
|
# If testing on a remote host, download the source file.
|
|
# remote_download host $srcdir/$subdir/$srcfile
|
|
|
|
# define relative source line numbers:
|
|
# all subsequent line numbers are relative to this first one (baseline)
|
|
set baseline [gdb_find_recursion_test_baseline $srcfile]
|
|
if { $baseline == -1 } then {
|
|
fail "could not find gdb_recursion_test function"
|
|
return
|
|
}
|
|
|
|
set testline1 [expr $baseline + 1]
|
|
set testline2 [expr $baseline + 5]
|
|
set testline3 [expr $baseline + 6]
|
|
set testline4 [expr $baseline + 7]
|
|
set testline5 [expr $baseline + 8]
|
|
|
|
#
|
|
# test tfind command
|
|
#
|
|
|
|
gdb_delete_tracepoints
|
|
set tdp1 [gdb_gettpnum "\*gdb_recursion_test"]
|
|
set tdp2 [gdb_gettpnum $testline2]
|
|
set tdp3 [gdb_gettpnum $testline3]
|
|
set tdp4 [gdb_gettpnum $testline4]
|
|
set tdp5 [gdb_gettpnum $testline5]
|
|
if { $tdp1 <= 0 || $tdp2 <= 0 || $tdp3 <= 0 || \
|
|
$tdp4 <= 0 || $tdp5 <= 0 } then {
|
|
fail "setting tracepoints"
|
|
return
|
|
}
|
|
|
|
# 6.1 test tstart command
|
|
|
|
set return_me 1
|
|
gdb_test_multiple "tstart" "6.1: tstart" {
|
|
-re "Trace can only be run on remote targets.*$gdb_prompt $" {
|
|
fail "6.1: tstart (not connected to remote?)"
|
|
}
|
|
-re "Target does not support this command.*$gdb_prompt $" {
|
|
fail "6.1: tstart (connected to wrong target?)"
|
|
}
|
|
-re "Target returns error code.*$gdb_prompt $" {
|
|
fail "6.1: tstart (connected to wrong target?)"
|
|
}
|
|
-re "$gdb_prompt $" {
|
|
pass "6.1: tstart"
|
|
set return_me 0
|
|
}
|
|
}
|
|
|
|
if { $return_me == 1 } then {
|
|
return -1
|
|
}
|
|
|
|
# test tstatus (when trace on)
|
|
gdb_test "tstatus" "\[Tt\]race is running.*" "test tstatus on"
|
|
|
|
gdb_breakpoint "end" qualified
|
|
gdb_test "continue" \
|
|
"Continuing.*Breakpoint $decimal, end.*" \
|
|
"run trace experiment"
|
|
|
|
# 7.1 test tstop command
|
|
|
|
set return_me 1
|
|
gdb_test_multiple "tstop" "7.1: tstop" {
|
|
-re "Trace can only be run on remote targets.*$gdb_prompt $" {
|
|
fail "7.1: tstop (not connected to remote?)"
|
|
}
|
|
-re "Target does not support this command.*$gdb_prompt $" {
|
|
fail "7.1: tstop (connected to wrong target?)"
|
|
}
|
|
-re "Target returns error code.*$gdb_prompt $" {
|
|
fail "7.1: tstop (connected to wrong target?)"
|
|
}
|
|
-re "$gdb_prompt $" {
|
|
pass "7.1: tstop"
|
|
set return_me 0
|
|
}
|
|
}
|
|
|
|
if { $return_me == 1 } then {
|
|
return -1
|
|
}
|
|
|
|
# test tstatus (when trace off)
|
|
gdb_test "tstatus" "Trace stopped by a tstop command.*" \
|
|
"test tstatus off after tstop"
|
|
|
|
## record starting PC
|
|
set save_pc [gdb_readexpr "(unsigned long) \$pc"]
|
|
if { $save_pc == -1 } then {
|
|
fail "could not read PC"
|
|
return
|
|
}
|
|
|
|
# 8.7 tfind start
|
|
## check $trace_frame == 0
|
|
gdb_tfind_test "8.7: tfind start command" "start" "0"
|
|
## check $pc != startPC
|
|
gdb_test "printf \"x \%d x\\n\", \$pc != $save_pc" \
|
|
"x 1 x" \
|
|
"8.7b: tfind start"
|
|
|
|
# 8.8 tfind none
|
|
## check $trace_frame == -1
|
|
gdb_tfind_test "8.8: tfind none" "none" "-1"
|
|
## check $pc == startPC
|
|
gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \
|
|
"x 1 x" \
|
|
"8.8b: tfind none (restores non-trace PC)"
|
|
|
|
# 8.9 tfind end
|
|
## check $trace_frame == -1
|
|
gdb_tfind_test "8.9: tfind end, selects no frame" "end" "-1"
|
|
## check $pc == startPC
|
|
gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \
|
|
"x 1 x" \
|
|
"8.9b: tfind end (restores non-tracing PC)"
|
|
|
|
# 8.1 tfind n
|
|
## check $trace_frame == n
|
|
gdb_tfind_test "8.1: tfind 1" "1" "1"
|
|
## check $trace_line corresponds to tracepoint for frame n
|
|
gdb_test "print \$trace_line" "$testline2" "8.1b: tfind 1 (correct line)"
|
|
|
|
# 8.28 tfind invalid n (big number)
|
|
## check "not found" error
|
|
## check $trace_frame != n
|
|
gdb_test "tfind 32767" \
|
|
"failed to find.*" \
|
|
"8.28: tfind <n> command rejects invalid frame number"
|
|
|
|
gdb_test "printf \"x \%d x\\n\", \$trace_frame == 32767" \
|
|
"x 0 x" \
|
|
"8.28: tfind <n> rejected bad input (32767)"
|
|
|
|
# 8.31 tfind negative n
|
|
## check error
|
|
gdb_test "tfind -3" "invalid input.*" "8.31: tfind <n> rejects negative input"
|
|
## check $trace_frame != -n
|
|
gdb_test "printf \"x \%d x\\n\", \$trace_frame == -3" "x 0 x" \
|
|
"8.31: tfind <n> rejected negative input (-3)"
|
|
|
|
# 8.10 tfind <no arg>
|
|
## check $trace_frame += 1
|
|
|
|
gdb_tfind_test "8.10: tfind start" "start" "0"
|
|
gdb_test "print \$trace_line" "$baseline" \
|
|
"8.10: tfind 0 (correct line $baseline)"
|
|
gdb_tfind_test "8.10: tfind noargument 1" "" "1"
|
|
gdb_test "print \$trace_line" "$testline2" \
|
|
"8.10: tfind 1 (correct line $testline2)"
|
|
gdb_tfind_test "8.10: tfind noargument 2" "" "2"
|
|
gdb_test "print \$trace_line" "$testline3" \
|
|
"8.10: tfind 2 (correct line $testline3)"
|
|
gdb_tfind_test "8.10: tfind noargument 3" "" "3"
|
|
gdb_test "print \$trace_line" "$testline4" \
|
|
"8.10: tfind 3 (correct line $testline4)"
|
|
|
|
gdb_tfind_test "8.11: tfind 3" "3" "3"
|
|
gdb_test "print \$trace_line" "$testline4" \
|
|
"8.11: tfind 3 (correct line $testline4)"
|
|
gdb_tfind_test "8.11: tfind backward 2" "-" "2"
|
|
gdb_test "print \$trace_line" "$testline3" \
|
|
"8.11: tfind 2 (correct line $testline3)"
|
|
gdb_tfind_test "8.11: tfind backward 1" "-" "1"
|
|
gdb_test "print \$trace_line" "$testline2" \
|
|
"8.11: tfind 1 (correct line $testline2)"
|
|
gdb_tfind_test "8.11: tfind backward 0" "-" "0"
|
|
gdb_test "print \$trace_line" "$baseline" \
|
|
"8.11: tfind 0 (correct line $baseline)"
|
|
|
|
gdb_tfind_test "8.12: tfind none" "none" "-1"
|
|
gdb_tfind_test "8.12: tfind tracepoint <n>" "tracepoint $tdp2" \
|
|
"\$tracepoint" "$tdp2"
|
|
gdb_test "print \$trace_line" "$testline2" \
|
|
"8.12: tfind tracepoint <n> (line $testline2)"
|
|
|
|
gdb_tfind_test "8.25: tfind none" "none" "-1"
|
|
gdb_test "tfind tracepoint 0" "failed to find.*" \
|
|
"8.25: tfind tracepoint rejects zero"
|
|
gdb_test "tfind tracepoint 32767" "failed to find.*" \
|
|
"8.25: tfind tracepoint rejects nonexistant tracepoint (32767)"
|
|
gdb_test "tfind tracepoint -1" "failed to find.*" \
|
|
"8.25: tfind tracepoint rejects nonexistant tracepoint (-1)"
|
|
|
|
# 8.37 tfind tracepoint n where n no longer exists (but used to)
|
|
gdb_test_no_output "delete trace $tdp2" ""
|
|
gdb_tfind_test "8.37: tfind none" "none" "-1"
|
|
gdb_tfind_test "8.37: tfind deleted tracepoint" \
|
|
"tracepoint $tdp2" \
|
|
"\$tracepoint" "$tdp2"
|
|
gdb_test "print \$trace_line" "$testline2" \
|
|
"8.37: tfind deleted tracepoint (line $testline2)"
|
|
|
|
# 8.13 tfind tracepoint <no arg>
|
|
## check $tracepoint same before and after, $trace_frame changed
|
|
|
|
gdb_tfind_test "8.13: tfind none" "none" "-1"
|
|
gdb_tfind_test "8.13: tracepoint $tdp1" "tracepoint $tdp1" \
|
|
"\$tracepoint" "$tdp1"
|
|
gdb_test "print \$trace_line" "$baseline" \
|
|
"8.13: tfind tracepoint $tdp1 (line $baseline)"
|
|
gdb_test_no_output "set \$save_frame = \$trace_frame" ""
|
|
gdb_tfind_test "8.13: tracepoint <no arg>" "tracepoint" \
|
|
"\$tracepoint" "$tdp1"
|
|
gdb_test "printf \"x \%d x\\n\", \$trace_frame == \$save_frame" \
|
|
"x 0 x" \
|
|
"8.13: tracepoint <no arg>, tracepoint number unchanged"
|
|
|
|
# 1.12 set tracepoint in prologue
|
|
#
|
|
# tdp1 was set at *gdb_recursion_test (ie. the hard address of the
|
|
# function, before the prologue). Test to see that it succeeded.
|
|
# Current pc should be equal to the address of the function.
|
|
|
|
gdb_test "printf \"x \%d x\\n\", \$pc == gdb_recursion_test" \
|
|
"x 1 x" \
|
|
"1.12: set tracepoint in prologue"
|
|
|
|
# 8.14 tfind pc x
|
|
## check pc == x, $trace_frame != -1
|
|
gdb_tfind_test "8.14: tfind 3" "3" "3"
|
|
gdb_test "print \$trace_line" "$testline4" \
|
|
"8.14: tfind 3 (line $testline4)"
|
|
|
|
gdb_test_no_output "set \$test_pc = \$pc" ""
|
|
gdb_tfind_test "8.14: tfind none" "none" "-1"
|
|
gdb_tfind_test "8.14: tfind pc" "pc \$test_pc" "\$trace_frame != -1" "1"
|
|
gdb_test "print \$trace_line" "$testline4" \
|
|
"8.14: tfind pc x (line $testline4)"
|
|
gdb_test "printf \"x \%d x\\n\", \$pc == \$test_pc" \
|
|
"x 1 x" \
|
|
"8.14: tfind pc x"
|
|
|
|
# 8.15 tfind pc <no arg>
|
|
## check pc same before and after, $trace_frame changed
|
|
gdb_tfind_test "8.15: tfind 3" "3" "3"
|
|
gdb_test "print \$trace_line" "$testline4" \
|
|
"8.15: tfind 3 (line $testline4)"
|
|
gdb_test_no_output "set \$test_pc = \$pc" ""
|
|
gdb_tfind_test "8.15: tfind pc" "pc" "\$pc == \$test_pc" "1"
|
|
gdb_test "print \$trace_line" "$testline4" \
|
|
"8.15: tfind pc (line $testline4)"
|
|
gdb_test "printf \"x \%d x\\n\", \$trace_frame != 3" "x 1 x" \
|
|
"8.15: trace frame didn't change"
|
|
|
|
# 8.26 tfind pc invalid x
|
|
## check error, pc != x (trace_frame unchanged?)
|
|
gdb_tfind_test "8.26: tfind start" "start" "0"
|
|
gdb_test "tfind pc 0" "failed to find.*" "8.26: tfind pc zero"
|
|
gdb_test "tfind pc -1" "failed to find.*" "8.26: tfind pc -1"
|
|
|
|
# 8.16 tfind line n
|
|
## check #trace_frame != -1, $trace_line == n
|
|
gdb_tfind_test "8.16: tfind none" "none" "-1"
|
|
gdb_tfind_test "8.16: tfind line $testline3" \
|
|
"line $testline3" \
|
|
"\$trace_line == $testline3" "1"
|
|
|
|
# 8.17 tfind line <no arg> (# 8.19, 8.20)
|
|
## check $trace_line changed, no error, pc changed, frame changed, tdp changed
|
|
gdb_tfind_test "8.17: tfind none" "none" "-1"
|
|
gdb_tfind_test "8.17: tfind line $testline3" "line $testline3" "\$trace_line == $testline3" "1"
|
|
gdb_tfind_test "8.17: tfind line <no arg>" "line" "\$trace_line != $testline3" "1"
|
|
|
|
# 8.36 tfind and disassembly
|
|
gdb_tfind_test "8.36: tfind start" "start" "0"
|
|
set timeout 60
|
|
# look for disassembly of function label
|
|
gdb_test "disassemble gdb_c_test" \
|
|
"<(\.\[0-9\]+|)>:.*End of assembler dump.*" \
|
|
"8.36: trace disassembly"
|
|
|
|
gdb_test "tfind line 0" \
|
|
"out of range.*|failed to find.*|No line 0 in .*" \
|
|
"8.18: tfind line 0"
|
|
gdb_test "tfind line 32767" \
|
|
"out of range.*|failed to find.*|No line 32767 in .*" \
|
|
"8.27: tfind line 32767"
|
|
gdb_test "tfind line NoSuChFiLe.c:$baseline" \
|
|
"No source file named.*" \
|
|
"8.27: tfind line in bad source file"
|
|
|
|
# 8.32 tfind invalid subcommand (tfind foo)
|
|
## check error
|
|
gdb_test "tfind NoSuChOpTiOn 21" \
|
|
"No symbol.*|\[Ww\]arning.*|\[Ee\]rror.*" \
|
|
"8.32: tfind with bad subcommand"
|
|
|
|
# Finished!
|
|
gdb_tfind_test "8.17: tfind none" "none" "-1"
|