344 lines
9.4 KiB
Plaintext
344 lines
9.4 KiB
Plaintext
@c Copyright 2011
|
|
@c Free Software Foundation, Inc.
|
|
@c This is part of the GAS manual.
|
|
@c For copying conditions, see the file as.texinfo.
|
|
@c man end
|
|
|
|
@ifset GENERIC
|
|
@page
|
|
@node TILE-Gx-Dependent
|
|
@chapter TILE-Gx Dependent Features
|
|
@end ifset
|
|
@ifclear GENERIC
|
|
@node Machine Dependencies
|
|
@chapter TILE-Gx Dependent Features
|
|
@end ifclear
|
|
|
|
@cindex TILE-Gx support
|
|
@menu
|
|
* TILE-Gx Options:: TILE-Gx Options
|
|
* TILE-Gx Syntax:: TILE-Gx Syntax
|
|
* TILE-Gx Directives:: TILE-Gx Directives
|
|
@end menu
|
|
|
|
@node TILE-Gx Options
|
|
@section Options
|
|
|
|
The following table lists all available TILE-Gx specific options:
|
|
|
|
@c man begin OPTIONS
|
|
@table @gcctabopt
|
|
@cindex @samp{-m32} option, TILE-Gx
|
|
@cindex @samp{-m64} option, TILE-Gx
|
|
@item -m32 | -m64
|
|
Select the word size, either 32 bits or 64 bits.
|
|
|
|
@cindex @samp{-EB} option, TILE-Gx
|
|
@cindex @samp{-EL} option, TILE-Gx
|
|
@item -EB | -EL
|
|
Select the endianness, either big-endian (-EB) or little-endian (-EL).
|
|
|
|
@end table
|
|
@c man end
|
|
|
|
@node TILE-Gx Syntax
|
|
@section Syntax
|
|
@cindex TILE-Gx syntax
|
|
@cindex syntax, TILE-Gx
|
|
|
|
Block comments are delimited by @samp{/*} and @samp{*/}. End of line
|
|
comments may be introduced by @samp{#}.
|
|
|
|
Instructions consist of a leading opcode or macro name followed by
|
|
whitespace and an optional comma-separated list of operands:
|
|
|
|
@smallexample
|
|
@var{opcode} [@var{operand}, @dots{}]
|
|
@end smallexample
|
|
|
|
Instructions must be separated by a newline or semicolon.
|
|
|
|
There are two ways to write code: either write naked instructions,
|
|
which the assembler is free to combine into VLIW bundles, or specify
|
|
the VLIW bundles explicitly.
|
|
|
|
Bundles are specified using curly braces:
|
|
|
|
@smallexample
|
|
@{ @var{add} r3,r4,r5 ; @var{add} r7,r8,r9 ; @var{lw} r10,r11 @}
|
|
@end smallexample
|
|
|
|
A bundle can span multiple lines. If you want to put multiple
|
|
instructions on a line, whether in a bundle or not, you need to
|
|
separate them with semicolons as in this example.
|
|
|
|
A bundle may contain one or more instructions, up to the limit
|
|
specified by the ISA (currently three). If fewer instructions are
|
|
specified than the hardware supports in a bundle, the assembler
|
|
inserts @code{fnop} instructions automatically.
|
|
|
|
The assembler will prefer to preserve the ordering of instructions
|
|
within the bundle, putting the first instruction in a lower-numbered
|
|
pipeline than the next one, etc. This fact, combined with the
|
|
optional use of explicit @code{fnop} or @code{nop} instructions,
|
|
allows precise control over which pipeline executes each instruction.
|
|
|
|
If the instructions cannot be bundled in the listed order, the
|
|
assembler will automatically try to find a valid pipeline
|
|
assignment. If there is no way to bundle the instructions together,
|
|
the assembler reports an error.
|
|
|
|
The assembler does not yet auto-bundle (automatically combine multiple
|
|
instructions into one bundle), but it reserves the right to do so in
|
|
the future. If you want to force an instruction to run by itself, put
|
|
it in a bundle explicitly with curly braces and use @code{nop}
|
|
instructions (not @code{fnop}) to fill the remaining pipeline slots in
|
|
that bundle.
|
|
|
|
@menu
|
|
* TILE-Gx Opcodes:: Opcode Naming Conventions.
|
|
* TILE-Gx Registers:: Register Naming.
|
|
* TILE-Gx Modifiers:: Symbolic Operand Modifiers.
|
|
@end menu
|
|
|
|
@node TILE-Gx Opcodes
|
|
@subsection Opcode Names
|
|
@cindex TILE-Gx opcode names
|
|
@cindex opcode names, TILE-Gx
|
|
|
|
For a complete list of opcodes and descriptions of their semantics,
|
|
see @cite{TILE-Gx Instruction Set Architecture}, available upon
|
|
request at www.tilera.com.
|
|
|
|
@node TILE-Gx Registers
|
|
@subsection Register Names
|
|
@cindex TILE-Gx register names
|
|
@cindex register names, TILE-Gx
|
|
|
|
General-purpose registers are represented by predefined symbols of the
|
|
form @samp{r@var{N}}, where @var{N} represents a number between
|
|
@code{0} and @code{63}. However, the following registers have
|
|
canonical names that must be used instead:
|
|
|
|
@table @code
|
|
@item r54
|
|
sp
|
|
|
|
@item r55
|
|
lr
|
|
|
|
@item r56
|
|
sn
|
|
|
|
@item r57
|
|
idn0
|
|
|
|
@item r58
|
|
idn1
|
|
|
|
@item r59
|
|
udn0
|
|
|
|
@item r60
|
|
udn1
|
|
|
|
@item r61
|
|
udn2
|
|
|
|
@item r62
|
|
udn3
|
|
|
|
@item r63
|
|
zero
|
|
|
|
@end table
|
|
|
|
The assembler will emit a warning if a numeric name is used instead of
|
|
the non-numeric name. The @code{.no_require_canonical_reg_names}
|
|
assembler pseudo-op turns off this
|
|
warning. @code{.require_canonical_reg_names} turns it back on.
|
|
|
|
@node TILE-Gx Modifiers
|
|
@subsection Symbolic Operand Modifiers
|
|
@cindex TILE-Gx modifiers
|
|
@cindex symbol modifiers, TILE-Gx
|
|
|
|
The assembler supports several modifiers when using symbol addresses
|
|
in TILE-Gx instruction operands. The general syntax is the following:
|
|
|
|
@smallexample
|
|
modifier(symbol)
|
|
@end smallexample
|
|
|
|
The following modifiers are supported:
|
|
|
|
@table @code
|
|
|
|
@item hw0
|
|
|
|
This modifier is used to load bits 0-15 of the symbol's address.
|
|
|
|
@item hw1
|
|
|
|
This modifier is used to load bits 16-31 of the symbol's address.
|
|
|
|
@item hw2
|
|
|
|
This modifier is used to load bits 32-47 of the symbol's address.
|
|
|
|
@item hw3
|
|
|
|
This modifier is used to load bits 48-63 of the symbol's address.
|
|
|
|
@item hw0_last
|
|
|
|
This modifier yields the same value as @code{hw0}, but it also checks
|
|
that the value does not overflow.
|
|
|
|
@item hw1_last
|
|
|
|
This modifier yields the same value as @code{hw1}, but it also checks
|
|
that the value does not overflow.
|
|
|
|
@item hw2_last
|
|
|
|
This modifier yields the same value as @code{hw2}, but it also checks
|
|
that the value does not overflow.
|
|
|
|
A 48-bit symbolic value is constructed by using the following idiom:
|
|
|
|
@smallexample
|
|
moveli r0, hw2_last(sym)
|
|
shl16insli r0, r0, hw1(sym)
|
|
shl16insli r0, r0, hw0(sym)
|
|
@end smallexample
|
|
|
|
@item hw0_got
|
|
|
|
This modifier is used to load bits 0-15 of the symbol's offset in the
|
|
GOT entry corresponding to the symbol.
|
|
|
|
@item hw0_last_got
|
|
|
|
This modifier yields the same value as @code{hw0_got}, but it also
|
|
checks that the value does not overflow.
|
|
|
|
@item hw1_last_got
|
|
|
|
This modifier is used to load bits 16-31 of the symbol's offset in the
|
|
GOT entry corresponding to the symbol, and it also checks that the
|
|
value does not overflow.
|
|
|
|
@item plt
|
|
|
|
This modifier is used for function symbols. It causes a
|
|
@emph{procedure linkage table}, an array of code stubs, to be created
|
|
at the time the shared object is created or linked against, together
|
|
with a global offset table entry. The value is a pc-relative offset
|
|
to the corresponding stub code in the procedure linkage table. This
|
|
arrangement causes the run-time symbol resolver to be called to look
|
|
up and set the value of the symbol the first time the function is
|
|
called (at latest; depending environment variables). It is only safe
|
|
to leave the symbol unresolved this way if all references are function
|
|
calls.
|
|
|
|
@item hw0_tls_gd
|
|
|
|
This modifier is used to load bits 0-15 of the offset of the GOT entry
|
|
of the symbol's TLS descriptor, to be used for general-dynamic TLS
|
|
accesses.
|
|
|
|
@item hw0_last_tls_gd
|
|
|
|
This modifier yields the same value as @code{hw0_tls_gd}, but it also
|
|
checks that the value does not overflow.
|
|
|
|
@item hw1_last_tls_gd
|
|
|
|
This modifier is used to load bits 16-31 of the offset of the GOT
|
|
entry of the symbol's TLS descriptor, to be used for general-dynamic
|
|
TLS accesses. It also checks that the value does not overflow.
|
|
|
|
@item hw0_tls_ie
|
|
|
|
This modifier is used to load bits 0-15 of the offset of the GOT entry
|
|
containing the offset of the symbol's address from the TCB, to be used
|
|
for initial-exec TLS accesses.
|
|
|
|
@item hw0_last_tls_ie
|
|
|
|
This modifier yields the same value as @code{hw0_tls_ie}, but it also
|
|
checks that the value does not overflow.
|
|
|
|
@item hw1_last_tls_ie
|
|
|
|
This modifier is used to load bits 16-31 of the offset of the GOT
|
|
entry containing the offset of the symbol's address from the TCB, to
|
|
be used for initial-exec TLS accesses. It also checks that the value
|
|
does not overflow.
|
|
|
|
@item hw0_tls_le
|
|
|
|
This modifier is used to load bits 0-15 of the offset of the symbol's
|
|
address from the TCB, to be used for local-exec TLS accesses.
|
|
|
|
@item hw0_last_tls_le
|
|
|
|
This modifier yields the same value as @code{hw0_tls_le}, but it also
|
|
checks that the value does not overflow.
|
|
|
|
@item hw1_last_tls_le
|
|
|
|
This modifier is used to load bits 16-31 of the offset of the symbol's
|
|
address from the TCB, to be used for local-exec TLS accesses. It
|
|
also checks that the value does not overflow.
|
|
|
|
@item tls_gd_call
|
|
|
|
This modifier is used to tag an instrution as the ``call'' part of a
|
|
calling sequence for a TLS GD reference of its operand.
|
|
|
|
@item tls_gd_add
|
|
|
|
This modifier is used to tag an instruction as the ``add'' part of a
|
|
calling sequence for a TLS GD reference of its operand.
|
|
|
|
@item tls_ie_load
|
|
|
|
This modifier is used to tag an instruction as the ``load'' part of a
|
|
calling sequence for a TLS IE reference of its operand.
|
|
|
|
@end table
|
|
|
|
@node TILE-Gx Directives
|
|
@section TILE-Gx Directives
|
|
@cindex machine directives, TILE-Gx
|
|
@cindex TILE-Gx machine directives
|
|
|
|
@table @code
|
|
|
|
@cindex @code{.align} directive, TILE-Gx
|
|
@item .align @var{expression} [, @var{expression}]
|
|
This is the generic @var{.align} directive. The first argument is the
|
|
requested alignment in bytes.
|
|
|
|
@cindex @code{.allow_suspicious_bundles} directive, TILE-Gx
|
|
@item .allow_suspicious_bundles
|
|
Turns on error checking for combinations of instructions in a bundle
|
|
that probably indicate a programming error. This is on by default.
|
|
|
|
@item .no_allow_suspicious_bundles
|
|
Turns off error checking for combinations of instructions in a bundle
|
|
that probably indicate a programming error.
|
|
|
|
@cindex @code{.require_canonical_reg_names} directive, TILE-Gx
|
|
@item .require_canonical_reg_names
|
|
Require that canonical register names be used, and emit a warning if
|
|
the numeric names are used. This is on by default.
|
|
|
|
@item .no_require_canonical_reg_names
|
|
Permit the use of numeric names for registers that have canonical
|
|
names.
|
|
|
|
@end table
|