0649bb3d69
that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
185 lines
7.0 KiB
C++
185 lines
7.0 KiB
C++
/* Definitions for remote debugging interface for ROM monitors.
|
|
Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
|
|
Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include "serial.h"
|
|
|
|
/* This structure describes the strings necessary to give small command
|
|
sequences to the monitor, and parse the response.
|
|
|
|
CMD is the actual command typed at the monitor. Usually this has
|
|
embedded sequences ala printf, which are substituted with the
|
|
arguments appropriate to that type of command. Ie: to examine a
|
|
register, we substitute the register name for the first arg. To
|
|
modify memory, we substitute the memory location and the new
|
|
contents for the first and second args, etc...
|
|
|
|
RESP_DELIM used to home in on the response string, and is used to
|
|
disambiguate the answer within the pile of text returned by the
|
|
monitor. This should be a unique string that immediately precedes
|
|
the answer. Ie: if your monitor prints out `PC: 00000001= ' in
|
|
response to asking for the PC, you should use `: ' as the
|
|
RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to
|
|
be ignored, or has no particular leading text.
|
|
|
|
TERM is the string that the monitor outputs to indicate that it is
|
|
idle, and waiting for input. This is usually a prompt of some
|
|
sort. In the previous example, it would be `= '. It is important
|
|
that TERM really means that the monitor is idle, otherwise GDB may
|
|
try to type at it when it isn't ready for input. This is a problem
|
|
because many monitors cannot deal with type-ahead. TERM may be
|
|
NULL if the normal prompt is output.
|
|
|
|
TERM_CMD is used to quit out of the subcommand mode and get back to
|
|
the main prompt. TERM_CMD may be NULL if it isn't necessary. It
|
|
will also be ignored if TERM is NULL. */
|
|
|
|
struct memrw_cmd
|
|
{
|
|
char *cmdb; /* Command to send for byte read/write */
|
|
char *cmdw; /* Command for word (16 bit) read/write */
|
|
char *cmdl; /* Command for long (32 bit) read/write */
|
|
char *cmdll; /* Command for long long (64 bit) read/write */
|
|
char *resp_delim; /* String just prior to the desired value */
|
|
char *term; /* Terminating string to search for */
|
|
char *term_cmd; /* String to get out of sub-mode (if necessary) */
|
|
};
|
|
|
|
struct regrw_cmd
|
|
{
|
|
char *cmd; /* Command to send for reg read/write */
|
|
char *resp_delim; /* String (actually a regexp if getmem) just
|
|
prior to the desired value */
|
|
char *term; /* Terminating string to search for */
|
|
char *term_cmd; /* String to get out of sub-mode (if necessary) */
|
|
};
|
|
|
|
struct monitor_ops
|
|
{
|
|
int flags; /* See below */
|
|
char **init; /* List of init commands. NULL terminated. */
|
|
char *cont; /* continue command */
|
|
char *step; /* single step */
|
|
char *stop; /* Interrupt program string */
|
|
char *set_break; /* set a breakpoint */
|
|
char *clr_break; /* clear a breakpoint */
|
|
char *clr_all_break; /* Clear all breakpoints */
|
|
char *fill; /* Memory fill cmd (addr len val) */
|
|
struct memrw_cmd setmem; /* set memory to a value */
|
|
struct memrw_cmd getmem; /* display memory */
|
|
struct regrw_cmd setreg; /* set a register */
|
|
struct regrw_cmd getreg; /* get a register */
|
|
/* Some commands can dump a bunch of registers
|
|
at once. This comes as a set of REG=VAL
|
|
pairs. This should be called for each pair
|
|
of registers that we can parse to supply
|
|
GDB with the value of a register. */
|
|
char *dump_registers; /* Command to dump all regs at once */
|
|
char *register_pattern; /* Pattern that picks out register from reg dump */
|
|
void (*supply_register) PARAMS ((char *name, int namelen, char *val, int vallen));
|
|
void (*load_routine) PARAMS ((serial_t desc, char *file, int hashmark)); /* Download routine */
|
|
char *load; /* load command */
|
|
char *loadresp; /* Response to load command */
|
|
char *prompt; /* monitor command prompt */
|
|
char *line_term; /* end-of-command delimitor */
|
|
char *cmd_end; /* optional command terminator */
|
|
struct target_ops *target; /* target operations */
|
|
int stopbits; /* number of stop bits */
|
|
char **regnames; /* array of register names in ascii */
|
|
int magic; /* Check value */
|
|
};
|
|
|
|
/* The monitor ops magic number, used to detect if an ops structure doesn't
|
|
have the right number of entries filled in. */
|
|
|
|
#define MONITOR_OPS_MAGIC 600925
|
|
|
|
/* Flag definitions. */
|
|
|
|
/* If set, then clear breakpoint command uses address, otherwise it
|
|
uses an index returned by the monitor. */
|
|
|
|
#define MO_CLR_BREAK_USES_ADDR 0x1
|
|
|
|
/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
|
|
as args, else it uses STARTADDR, LENGTH, VALUE as args. */
|
|
|
|
#define MO_FILL_USES_ADDR 0x2
|
|
|
|
/* If set, then monitor doesn't automatically supply register dump
|
|
when coming back after a continue. */
|
|
|
|
#define MO_NEED_REGDUMP_AFTER_CONT 0x4
|
|
|
|
/* getmem needs start addr and end addr */
|
|
|
|
#define MO_GETMEM_NEEDS_RANGE 0x8
|
|
|
|
/* getmem can only read one loc at a time */
|
|
|
|
#define MO_GETMEM_READ_SINGLE 0x10
|
|
|
|
/* handle \r\n combinations */
|
|
|
|
#define MO_HANDLE_NL 0x20
|
|
|
|
/* don't expect echos in monitor_open */
|
|
|
|
#define MO_NO_ECHO_ON_OPEN 0x40
|
|
|
|
/* If set, send break to stop monitor */
|
|
|
|
#define MO_SEND_BREAK_ON_STOP 0x80
|
|
|
|
/* If set, target sends an ACK after each S-record */
|
|
|
|
#define MO_SREC_ACK 0x100
|
|
|
|
/* Allow 0x prefix on addresses retured from monitor */
|
|
|
|
#define MO_HEX_PREFIX 0x200
|
|
|
|
/* Some monitors require a different command when starting a program */
|
|
|
|
#define MO_RUN_FIRST_TIME 0x400
|
|
|
|
/* Don't expect echos when getting memory */
|
|
|
|
#define MO_NO_ECHO_ON_SETMEM 0x800
|
|
|
|
/* If set, then register store command expects value BEFORE regname */
|
|
|
|
#define MO_REGISTER_VALUE_FIRST 0x1000
|
|
|
|
#define SREC_SIZE 160
|
|
|
|
extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops,
|
|
int from_tty));
|
|
extern void monitor_close PARAMS ((int quitting));
|
|
extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
|
|
extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));
|
|
extern int monitor_expect_prompt PARAMS ((char *buf, int buflen));
|
|
extern void monitor_printf PARAMS ((char *, ...))
|
|
ATTR_FORMAT(printf, 1, 2);
|
|
extern void monitor_printf_noecho PARAMS ((char *, ...))
|
|
ATTR_FORMAT(printf, 1, 2);
|
|
extern char *monitor_get_dev_name PARAMS ((void));
|
|
extern void init_monitor_ops PARAMS ((struct target_ops *));
|