(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
# Configure script for libada.
|
2009-04-09 17:00:19 +02:00
|
|
|
# Copyright 2003, 2004, 2009 Free Software Foundation, Inc.
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
#
|
|
|
|
# This file is free software; you can redistribute it and/or modify it
|
|
|
|
# under the terms of the GNU General Public License as published by
|
2009-04-09 17:00:19 +02:00
|
|
|
# the Free Software Foundation; either version 3 of the License, or
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
# (at your option) any later version.
|
|
|
|
#
|
|
|
|
# This program is distributed in the hope that it will be useful, but
|
|
|
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
# General Public License for more details.
|
|
|
|
#
|
|
|
|
# You should have received a copy of the GNU General Public License
|
2009-04-09 17:00:19 +02:00
|
|
|
# along with this program; see the file COPYING3. If not see
|
|
|
|
# <http://www.gnu.org/licenses/>.
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
|
2008-06-18 01:13:35 +02:00
|
|
|
sinclude(../config/acx.m4)
|
|
|
|
sinclude(../config/override.m4)
|
|
|
|
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
AC_INIT
|
|
|
|
AC_PREREQ([2.59])
|
|
|
|
|
|
|
|
AC_CONFIG_SRCDIR([Makefile.in])
|
|
|
|
|
|
|
|
# Command-line options.
|
|
|
|
# Very limited version of AC_MAINTAINER_MODE.
|
|
|
|
AC_ARG_ENABLE([maintainer-mode],
|
|
|
|
[AC_HELP_STRING([--enable-maintainer-mode],
|
|
|
|
[enable make rules and dependencies not useful (and
|
|
|
|
sometimes confusing) to the casual installer])],
|
|
|
|
[case ${enable_maintainer_mode} in
|
|
|
|
yes) MAINT='' ;;
|
|
|
|
no) MAINT='#' ;;
|
|
|
|
*) AC_MSG_ERROR([--enable-maintainer-mode must be yes or no]) ;;
|
|
|
|
esac
|
|
|
|
maintainer_mode=${enableval}],
|
|
|
|
[MAINT='#'])
|
|
|
|
AC_SUBST([MAINT])dnl
|
|
|
|
|
|
|
|
# Start of actual configure tests
|
|
|
|
|
|
|
|
AC_PROG_INSTALL
|
|
|
|
|
|
|
|
AC_CANONICAL_BUILD
|
|
|
|
AC_CANONICAL_HOST
|
|
|
|
AC_CANONICAL_TARGET
|
|
|
|
|
|
|
|
ACX_NONCANONICAL_TARGET
|
|
|
|
|
|
|
|
# Need to pass this down for now :-P
|
|
|
|
AC_PROG_LN_S
|
|
|
|
|
|
|
|
# Determine what to build for 'gnattools'
|
|
|
|
if test $build = $target ; then
|
|
|
|
# Note that build=target is almost certainly the wrong test; FIXME
|
|
|
|
default_gnattools_target="gnattools-native"
|
|
|
|
else
|
|
|
|
default_gnattools_target="gnattools-cross"
|
|
|
|
fi
|
|
|
|
AC_SUBST([default_gnattools_target])
|
|
|
|
|
|
|
|
# Target-specific stuff (defaults)
|
|
|
|
TOOLS_TARGET_PAIRS=
|
|
|
|
AC_SUBST(TOOLS_TARGET_PAIRS)
|
|
|
|
EXTRA_GNATTOOLS=
|
|
|
|
AC_SUBST(EXTRA_GNATTOOLS)
|
|
|
|
|
|
|
|
# Per-target case statement
|
|
|
|
# -------------------------
|
|
|
|
case "${target}" in
|
|
|
|
alpha*-dec-vx*) # Unlike all other Vxworks
|
|
|
|
;;
|
|
|
|
m68k*-wrs-vx* \
|
|
|
|
| powerpc*-wrs-vxworks \
|
|
|
|
| sparc*-wrs-vx* \
|
|
|
|
| *86-wrs-vxworks \
|
|
|
|
| mips*-wrs-vx*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-vxworks.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
sparc-sun-solaris*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-solaris.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
*86-*-solaris2*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-solaris.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
*86-*-linux* \
|
2007-02-11 12:28:52 +01:00
|
|
|
| powerpc*-*-linux* \
|
|
|
|
| *ia64-*-linux* \
|
|
|
|
| alpha*-*-linux* \
|
|
|
|
| sparc*-*-linux* \
|
|
|
|
| hppa*-*-linux* \
|
|
|
|
| *x86_64-*-linux*)
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
TOOLS_TARGET_PAIRS="\
|
2008-06-26 12:16:26 +02:00
|
|
|
mlib-tgt-specific.adb<mlib-tgt-specific-linux.adb \
|
2007-02-11 12:28:52 +01:00
|
|
|
indepsw.adb<indepsw-gnu.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
2007-02-11 12:28:52 +01:00
|
|
|
s390*-*-linux*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-linux.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
*86-*-freebsd*)
|
|
|
|
TOOLS_TARGET_PAIRS="\
|
2008-06-26 12:16:26 +02:00
|
|
|
mlib-tgt-specific.adb<mlib-tgt-specific-linux.adb \
|
2007-02-11 12:28:52 +01:00
|
|
|
indepsw.adb<indepsw-gnu.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
mips-sgi-irix*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-irix.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
hppa*-hp-hpux10*) # Unlike hpux11
|
|
|
|
;;
|
|
|
|
hppa*-hp-hpux11*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-hpux.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
*-ibm-aix*)
|
|
|
|
TOOLS_TARGET_PAIRS="\
|
2008-06-26 12:16:26 +02:00
|
|
|
mlib-tgt-specific.adb<mlib-tgt-specific-aix.adb \
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
indepsw.adb<indepsw-aix.adb"
|
|
|
|
;;
|
|
|
|
alpha*-dec-osf*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-tru64.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
alpha*-dec-vms* | alpha*-dec-openvms* | alpha*-dec-vms* \
|
|
|
|
| alpha*-hp-vms* | alpha*-hp-openvms* | alpha*-hp-vms*)
|
|
|
|
TOOLS_TARGET_PAIRS="\
|
2008-06-26 12:16:26 +02:00
|
|
|
mlib-tgt-specific.adb<mlib-tgt-specific-vms-alpha.adb \
|
2007-02-11 12:28:52 +01:00
|
|
|
symbols.adb<symbols-vms.adb \
|
|
|
|
symbols-processing.adb<symbols-processing-vms-alpha.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
|
|
|
|
EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
|
|
|
|
;;
|
|
|
|
ia64*-dec-vms* | ia64*-dec-openvms* | ia64*-dec-vms* \
|
|
|
|
| ia64*-hp-vms* | ia64*-hp-openvms* | ia64*-hp-vms*)
|
|
|
|
TOOLS_TARGET_PAIRS="\
|
2008-06-26 12:16:26 +02:00
|
|
|
mlib-tgt-specific.adb<mlib-tgt-specific-vms-ia64.adb \
|
2007-02-11 12:28:52 +01:00
|
|
|
symbols.adb<symbols-vms.adb \
|
|
|
|
symbols-processing.adb<symbols-processing-vms-ia64.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
|
|
|
|
EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
|
|
|
|
;;
|
|
|
|
*-*-cygwin32* | *-*-mingw32* | *-*-pe)
|
|
|
|
TOOLS_TARGET_PAIRS="\
|
2008-06-26 12:16:26 +02:00
|
|
|
mlib-tgt-specific.adb<mlib-tgt-specific-mingw.adb \
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
indepsw.adb<indepsw-mingw.adb"
|
|
|
|
EXTRA_GNATTOOLS='../../gnatdll$(exeext)'
|
|
|
|
;;
|
2007-12-05 15:34:48 +01:00
|
|
|
powerpc-*-darwin* | *86-*-darwin*)
|
2008-06-26 12:16:26 +02:00
|
|
|
TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-darwin.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
*-*-lynxos)
|
2007-02-11 12:28:52 +01:00
|
|
|
TOOLS_TARGET_PAIRS="\
|
2008-06-26 12:16:26 +02:00
|
|
|
mlib-tgt-specific.adb<mlib-tgt-specific-lynxos.adb \
|
2007-02-11 12:28:52 +01:00
|
|
|
indepsw.adb<indepsw-gnu.adb"
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
;;
|
|
|
|
esac
|
|
|
|
|
configure.ac: Add makefile fragments for hpux.
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Add makefile fragments for hpux.
* Makefile.def (flags_to_pass): Add ADA_CFLAGS.
* Makefile.tpl (HOST_EXPORTS): Pass ADA_CFLAGS.
* configure: Regenerate.
* Makefile.in: Regenerate.
config:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* mh-pa: New, from gcc/config/pa/x-ada.
* mh-pa-hpux10: New, from gcc/config/pa/x-ada-hpux10.
gcc:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Substitute ADA_CFLAGS.
* configure: Regenerate.
* config.host: Remove mention of pa/x-ada and pa/x-ada-hpux10 files.
* Makefile.in: Remove mention of X_* variables.
* config/pa/x-ada-hpux10: Remove.
* config/pa/x-ada: Remove.
* doc/fragments.texi: Update.
gcc/ada:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* gcc-interface/Make-lang.in (ALL_ADAFLAGS): Remove X_ADAFLAGS and
T_ADAFLAGS, replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(ALL_ADA_CFLAGS): Remove, replace throughout with ADA_CFLAGS.
* gcc-interface/Makefile.in (XCFLAGS, X_CFLAGS, X_CPPFLAGS, T_CPPFLAGS,
X_ADA_CFLAGS, T_ADA_CFLAGS, X_ADAFLAGS, T_ADAFLAGS, ADA_CFLAGS,
ALL_ADA_CFLAGS): Remove.
(ALL_ADAFLAGS, MOST_ADAFLAGS): Remove X_ADAFLAGS and T_ADAFLAGS,
replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(GCC_CFLAGS): Remove X_CFLAGS.
(LOOSE_CFLAGS): Remove X_CFLAGS and XCFLAGS.
(ALL_CPPFLAGS): Remove X_CPPFLAGS and T_CPPFLAGS.
(ADA_CFLAGS): Substitute.
gnattools:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (x_ada_cflags): Remove.
(ADA_CFLAGS): Substitute.
* configure: Regenerate.
* Makefile.in (ADA_CFLAGS): Substitute.
(T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove.
(TOOLS_FLAGS_TO_PASS_1, TOOLS_FLAGS_TO_PASS_1re,
TOOLS_FLAGS_TO_PASS_NATIVE, TOOLS_FLAGS_TO_PASS_CROSS):
Pass ADA_CFLAGS.
From-SVN: r138301
2008-07-30 14:17:17 +02:00
|
|
|
# From user or toplevel makefile.
|
|
|
|
AC_SUBST(ADA_CFLAGS)
|
|
|
|
|
configure.ac: Do not generate libada-mk.
gcc:
2008-08-01 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Do not generate libada-mk. Do not subst
host_cc_for_libada.
* libada-mk.in: Remove.
* Makefile.in: Pass TARGET_LIBGCC2_CFLAGS to libgcc.mvars.
* configure: Regenerate.
libada:
2008-08-01 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (warn_cflags): Substitute.
* configure: Regenerate.
* Makefile.in (libdir, WARN_CFLAGS): Substitute.
(GCC_WARN_CFLAGS): Remove NOCOMMON_FLAG.
(ADA_CFLAGS, T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove,
they were unused.
(libada-mk): Do not include. Include libgcc.mvars instead.
(tmake_file): Remove, do not include.
(FLAGS_TO_PASS): Pass dummy values for exeext and CC.
* configure: Regenerate.
gnattools:
2008-08-01 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (warn_cflags): Substitute.
* configure: Regenerate.
* Makefile.in (libdir, exeext, WARN_CFLAGS): Substitute.
(GCC_WARN_CFLAGS): Remove NOCOMMON_FLAG.
(ADA_INCLUDE_DIR, ADA_RTL_OBJ_DIR): Remove as they were unused.
(libsubdir): Remove.
(libada-mk): Do not include. Include libgcc.mvars instead.
(xmake_file): Remove, do not include.
From-SVN: r138479
2008-08-01 10:18:13 +02:00
|
|
|
AC_PROG_CC
|
|
|
|
warn_cflags=
|
|
|
|
if test "x$GCC" = "xyes"; then
|
|
|
|
warn_cflags='$(GCC_WARN_CFLAGS)'
|
|
|
|
fi
|
|
|
|
AC_SUBST(warn_cflags)
|
|
|
|
|
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
|
|
|
# Output: create a Makefile.
|
|
|
|
AC_CONFIG_FILES([Makefile])
|
|
|
|
|
|
|
|
AC_OUTPUT
|