gcc/configure.in

2299 lines
76 KiB
Plaintext
Raw Normal View History

# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
1997-08-22 00:57:35 +02:00
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
1997-08-22 00:57:35 +02:00
##############################################################################
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
sinclude(config/acx.m4)
AC_INIT(move-if-change)
AC_PREREQ(2.13)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
# Get 'install' or 'install-sh' and its variants.
AC_PROG_INSTALL
ACX_PROG_LN
2004-05-24 13:08:12 +02:00
AC_PROG_LN_S
### we might need to use some other shell than /bin/sh for running subshells
### If we are on Windows, search for the shell. This will permit people
### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
### without also having to set CONFIG_SHELL. This code will work when
### using bash, which sets OSTYPE.
case "${OSTYPE}" in
*win32*)
if test x${CONFIG_SHELL} = x ; then
if test ! -f /bin/sh ; then
if test x${SHELL} != x && test -f ${SHELL} ; then
CONFIG_SHELL=${SHELL}
export CONFIG_SHELL
else
for prog in sh sh.exe bash bash.exe; do
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/$prog; then
CONFIG_SHELL=$dir/$prog
export CONFIG_SHELL
break
fi
done
IFS="$save_ifs"
test -n "${CONFIG_SHELL}" && break
done
fi
fi
fi
;;
esac
config_shell=${CONFIG_SHELL-/bin/sh}
progname=$0
# if PWD already has a value, it is probably wrong.
if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
# Export original configure arguments for use by sub-configures. These
# will be expanded by make, so quote '$'.
tmp="$progname $@"
sed -e 's,\$,$$,g' <<EOF_SED > conftestsed.out
$tmp
EOF_SED
TOPLEVEL_CONFIGURE_ARGUMENTS=`cat conftestsed.out`
rm -f conftestsed.out
AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
moveifchange=${srcdir}/move-if-change
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# We pass INSTALL explicitly to sub-makes. Make sure that it is not
# a relative path.
if test "$INSTALL" = "${srcdir}/install-sh -c"; then
INSTALL="${srcpwd}/install-sh -c"
fi
# Set srcdir to "." if that's what it is.
# This is important for multilib support.
pwd=`${PWDCMD-pwd}`
if test "${pwd}" = "${srcpwd}" ; then
srcdir=.
fi
topsrcdir=$srcpwd
1997-08-22 00:57:35 +02:00
extra_host_args=
1997-08-22 00:57:35 +02:00
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
### (library or tools, host or target), doing a dependency sort.
# Subdirs will be configured in the order listed in build_configdirs,
# configdirs, or target_configdirs; see the serialization section below.
# Dependency sorting is only needed when *configuration* must be done in
# a particular order. In all cases a dependency should be specified in
# the Makefile, whether or not it's implicitly specified here.
1997-08-22 00:57:35 +02:00
# Double entries in build_configdirs, configdirs, or target_configdirs may
# cause circular dependencies and break everything horribly.
1997-08-22 00:57:35 +02:00
# these library is used by various programs built for the build
# environment
#
build_libs="build-libiberty"
# these tools are built for the build environment
build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
1997-08-22 00:57:35 +02:00
# these libraries are used by various programs built for the host environment
#
host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
1997-08-22 00:57:35 +02:00
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
(top level) Merged from libada-gnattools-branch: 2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org> * gnattools: New directory. * Makefile.def: Add gnattools as a module, depending on target-libada. * Makefile.in: Regenerate. * configure.in: Include gnattools in host_tools; disable it if ada is disabled. * configure: Regenerate. (gcc) * configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada. * configure: Regenerate. * libada-mk.in: Remove CC; rename cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada. (gcc/ada) Partial merge from libada-gnattools-branch: 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags into code in gnattools/Makefile.in. Remove direct dependencies on stamp-tools by tools clauses. 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * config-lang.in: Add gnattools to $lang_dirs. (libada) 2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Add stamp file for building libada, to avoid duplicate builds every time all-gnattools is called. 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure) here. 2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org> * configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST, _TARGET. * configure: Regenerate. 2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org> * configure.ac, Makefile.in: Remove gnattools-specific code (see gnattools directory). * Makefile.in: Remove dead rts-* targets. * configure: Regenerate. (gnattools) 2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Remove use of cc_set_by_configure; just use plain old CC from the top level in this case. 2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org> Merge from mainline at tag libada-gnattools-merge-20050129: * configure.ac: Changes propagated from gcc/ada/Makefile.in. * Makefile.in: Changes relocated from gcc/ada/Makefile.in. 2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Reinstate stamp-gnatlib check. 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from gcc/ada/configure.ac into gnattools-native and gnattools-cross targets, collecting flags as appropriate from here, gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain identical behavior. * configure.ac: Add necessary configure bits from gcc/ada/configure.ac. * configure: Regenerate. 2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org> * configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST, _TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST. * configure: Regenerate. 2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in, configure.ac: Remove libada-specific targets and variables. * configure: Regenerate. * New directory, cloned from libada. From-SVN: r95594
2005-02-26 22:43:33 +01:00
host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-boehm-gc \
target-zlib \
target-qthreads \
target-libjava"
1997-08-22 00:57:35 +02:00
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
target_libraries="target-libiberty \
target-libgloss \
target-newlib \
target-libstdc++-v3 \
target-libmudflap \
2005-07-02 10:52:21 +02:00
target-libssp \
target-libgfortran \
${libgcj} \
target-libobjc \
target-libada"
1997-08-22 00:57:35 +02:00
# these tools are built using the target libraries, and are intended to
# run only in the target environment
1997-08-22 00:57:35 +02:00
#
# note: any program that *uses* libraries that are in the "target_libraries"
1997-08-22 00:57:35 +02:00
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
2003-01-24 01:39:39 +01:00
target_tools="target-examples target-groff target-gperf target-rda"
1997-08-22 00:57:35 +02:00
################################################################################
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
## is important because configure will choke if they ever get through.
## ${configdirs} is directories we build using the host tools.
## ${target_configdirs} is directories we build using the target tools.
configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libraries} ${target_tools}`
build_configdirs=`echo ${build_libs} ${build_tools}`
1997-08-22 00:57:35 +02:00
################################################################################
srcname="gnu development package"
# This gets set non-empty for some net releases of packages.
appdirs=""
# Define is_cross_compiler to save on calls to 'test'.
is_cross_compiler=
if test x"${host}" = x"${target}" ; then
is_cross_compiler=no
else
is_cross_compiler=yes
fi
# Find the build and target subdir names.
GCC_TOPLEV_SUBDIRS
# Skipdirs are removed silently.
skipdirs=
# Noconfigdirs are removed loudly.
noconfigdirs=""
1997-08-22 00:57:35 +02:00
use_gnu_ld=
# Make sure we don't let GNU ld be added if we didn't want it.
if test x$with_gnu_ld = xno ; then
use_gnu_ld=no
noconfigdirs="$noconfigdirs ld"
1997-08-22 00:57:35 +02:00
fi
use_gnu_as=
# Make sure we don't let GNU as be added if we didn't want it.
if test x$with_gnu_as = xno ; then
use_gnu_as=no
noconfigdirs="$noconfigdirs gas"
1997-08-22 00:57:35 +02:00
fi
# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
1997-08-22 00:57:35 +02:00
case ${with_x} in
yes | "") ;; # the default value for this tree is that X11 is available
no)
skipdirs="${skipdirs} tk itcl libgui"
# We won't be able to build gdbtk without X.
enable_gdbtk=no
;;
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
1997-08-22 00:57:35 +02:00
# Some tools are only suitable for building in a "native" situation.
# Remove these if host!=target.
native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
# Similarly, some are only suitable for cross toolchains.
# Remove these if host=target.
cross_only="target-libgloss target-newlib target-opcodes"
1997-08-22 00:57:35 +02:00
case $is_cross_compiler in
no) skipdirs="${skipdirs} ${cross_only}" ;;
yes) skipdirs="${skipdirs} ${native_only}" ;;
esac
1997-08-22 00:57:35 +02:00
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
if test x"${with_headers}" != x && test x"${with_headers}" != xno \
&& test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
if test x"${with_newlib}" = x ; then
with_newlib=no
fi
fi
# Recognize --with-newlib/--without-newlib.
case ${with_newlib} in
no) skipdirs="${skipdirs} target-newlib" ;;
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
1997-08-22 00:57:35 +02:00
# Configure extra directories which are host specific
case "${host}" in
*-cygwin*)
configdirs="$configdirs libtermcap" ;;
1997-08-22 00:57:35 +02:00
esac
# A target can indicate whether a language isn't supported for some reason.
# Only spaces may be used in this macro; not newlines or tabs.
unsupported_languages=
1997-08-22 00:57:35 +02:00
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
case "${host}" in
hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
i[[3456789]]86-*-vsta)
noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
1997-08-22 00:57:35 +02:00
;;
i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
i[[3456789]]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl libgui gdb"
;;
2000-07-22 10:08:22 +02:00
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
1997-08-22 00:57:35 +02:00
;;
*-*-netbsd*)
noconfigdirs="$noconfigdirs rcs"
;;
1997-08-22 00:57:35 +02:00
ppc*-*-pe)
noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
;;
1997-08-22 00:57:35 +02:00
esac
AC_ARG_ENABLE(libada,
[ --enable-libada Builds libada directory],
ENABLE_LIBADA=$enableval,
ENABLE_LIBADA=yes)
if test "${ENABLE_LIBADA}" != "yes" ; then
noconfigdirs="$noconfigdirs target-libada"
(top level) Merged from libada-gnattools-branch: 2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org> * gnattools: New directory. * Makefile.def: Add gnattools as a module, depending on target-libada. * Makefile.in: Regenerate. * configure.in: Include gnattools in host_tools; disable it if ada is disabled. * configure: Regenerate. (gcc) * configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada. * configure: Regenerate. * libada-mk.in: Remove CC; rename cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada. (gcc/ada) Partial merge from libada-gnattools-branch: 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags into code in gnattools/Makefile.in. Remove direct dependencies on stamp-tools by tools clauses. 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * config-lang.in: Add gnattools to $lang_dirs. (libada) 2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Add stamp file for building libada, to avoid duplicate builds every time all-gnattools is called. 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure) here. 2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org> * configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST, _TARGET. * configure: Regenerate. 2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org> * configure.ac, Makefile.in: Remove gnattools-specific code (see gnattools directory). * Makefile.in: Remove dead rts-* targets. * configure: Regenerate. (gnattools) 2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Remove use of cc_set_by_configure; just use plain old CC from the top level in this case. 2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org> Merge from mainline at tag libada-gnattools-merge-20050129: * configure.ac: Changes propagated from gcc/ada/Makefile.in. * Makefile.in: Changes relocated from gcc/ada/Makefile.in. 2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Reinstate stamp-gnatlib check. 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from gcc/ada/configure.ac into gnattools-native and gnattools-cross targets, collecting flags as appropriate from here, gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain identical behavior. * configure.ac: Add necessary configure bits from gcc/ada/configure.ac. * configure: Regenerate. 2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org> * configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST, _TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST. * configure: Regenerate. 2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org> * Makefile.in, configure.ac: Remove libada-specific targets and variables. * configure: Regenerate. * New directory, cloned from libada. From-SVN: r95594
2005-02-26 22:43:33 +01:00
noconfigdirs="$noconfigdirs gnattools"
fi
AC_ARG_ENABLE(libssp,
[ --enable-libssp Builds libssp directory],
ENABLE_LIBSSP=$enableval,
ENABLE_LIBSSP=yes)
if test "${ENABLE_LIBSSP}" != "yes" ; then
noconfigdirs="$noconfigdirs target-libssp"
fi
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
case $enable_libgcj in
yes)
# If we reset it here, it won't get added to noconfigdirs in the
# target-specific build rules, so it will be forcibly enabled
# (unless the Java language itself isn't enabled).
libgcj=
;;
no)
# Make sure we get it printed in the list of not supported target libs.
noconfigdirs="$noconfigdirs ${libgcj}"
;;
esac
# Allow --disable-libmudflap to exclude target-libmudflap
case $enable_libmudflap in
yes)
;;
no)
noconfigdirs="$noconfigdirs target-libmudflap"
;;
"")
case "${target}" in
*-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
# Enable libmudflap by default in GNU and friends.
;;
*-*-freebsd*)
# Enable libmudflap by default in FreeBSD.
;;
*)
# Disable it by default everywhere else.
noconfigdirs="$noconfigdirs target-libmudflap"
;;
esac
esac
1997-08-22 00:57:35 +02:00
case "${target}" in
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
*-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
&& test -f /usr/local/include/gmp.h; then
with_gmp=/usr/local
fi
# Skip some stuff that's unsupported on some FreeBSD configurations.
case "${target}" in
i*86-*-*) ;;
alpha*-*-*) ;;
*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
esac
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-*-netbsd*)
# Skip some stuff on all NetBSD configurations.
noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
# Skip some stuff that's unsupported on some NetBSD configurations.
case "${target}" in
i*86-*-netbsdelf*) ;;
arm*-*-netbsdelf*) ;;
*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
esac
;;
configure.in: Remove target-libstdc++-v3 from noconfigdirs for *-*-netware... / * configure.in: Remove target-libstdc++-v3 from noconfigdirs for *-*-netware, but add target-libmudflap. Consolidate *-*-netware targets (of which really only i?86 exists) into a single entry. * configure: Likewise. gcc/ * config.gcc: Resurrect NetWare as a target. Handle special case of Novell linker to be used (specified through --with-ld=) and threading model of either Posix (default) or NKS. * config/i386/i386.c (ix86_return_pops_args): Conditionalize popping of incoming hidden argument on KEEP_AGGREGATE_RETURN_POINTER. * config/i386/i386.h (KEEP_AGGREGATE_RETURN_POINTER): New. * config/i386/netware.c, config/i386/netware.h: New. * config/i386/nwld.c, config/i386/nwld.h: New. * config/i386/netware-crt0.c: New. * config/i386/netware-libgcc.c: New. * config/i386/netware-libgcc.def: New. * config/i386/netware-libgcc.exp: New. * config/i386/t-netware, config/i386/t-nwld: New. * gthr-nks.h: New. * doc/install.texi: Document NKS threading model. gcc/cp/ * g++spec.c (MATH_LIBRARY_PROFILE): Default to MATH_LIBRARY rather than "-lm". gcc/testsuite/ * g++.dg/abi/bitfield5.C: Use -mno-ms-bitfields. * g++.old-deja/g++.jason/thunk2.C: xfail for NetWare. * g++.old-deja/g++.law/profile1.C: xfail for NetWare. * g++.old-deja/g++.other/store-expr1.C: xfail for NetWare. * gcc.c-torture/compile/20001109-1.c: xfail for NetWare. * gcc.c-torture/compile/20001109-2.c: xfail for NetWare. * gcc.c-torture/execute/multi-ix.c: Use __builtin_bzero rather than the non-portable bzero. * gcc.dg/20010912-1.c: xfail for NetWare. * gcc.dg/20020426-2.c: xfail for NetWare. * gcc.dg/20021014-1.c: xfail for NetWare. * gcc.dg/20021018-1.c: xfail for NetWare. * gcc.dg/20030213-1.c: xfail for NetWare. * gcc.dg/20030225-1.c: xfail for NetWare. * gcc.dg/20030708-1.c: xfail for NetWare. * gcc.dg/builtins-config.h: Also exclude NetWare. * gcc.dg/format/format.h: Define restrict only if not already defined. * gcc.dg/nest.c: xfail for NetWare. * gcc.dg/special/gcsec-1.c: Don't pass -static for NetWare. * lib/target-supports.exp (check_visibility_available): Exclude NetWare. fixincludes/ * inclhack.def: Suppress exception_structure and math_exception for NetWare headers. * fixincl.x: Regenerate. libstdc++-v3/ * crossconfig.m4: Add NetWare as a target. * configure: Regenerate. From-SVN: r87040
2004-09-03 20:10:08 +02:00
*-*-netware*)
noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
1997-08-22 00:57:35 +02:00
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
1997-08-22 00:57:35 +02:00
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
m32c-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
1997-12-22 03:40:10 +01:00
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
# newlib is not 64 bit ready. I'm not sure about fileutils.
1997-08-22 00:57:35 +02:00
# gas doesn't generate exception information.
noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
1997-08-22 00:57:35 +02:00
;;
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
alpha*-*-linux*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
1997-08-22 00:57:35 +02:00
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
am33_2.0-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
sh-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs target-examples"
2000-07-22 10:08:22 +02:00
noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
noconfigdirs="$noconfigdirs expect dejagnu"
# the C++ libraries don't build on top of CE's C libraries
noconfigdirs="$noconfigdirs target-libstdc++-v3"
noconfigdirs="$noconfigdirs target-newlib"
case "${host}" in
*-*-cygwin*) ;; # keep gdb and readline
*) noconfigdirs="$noconfigdirs gdb readline"
;;
esac
;;
2000-07-22 10:08:22 +02:00
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
arm-semi-aof )
;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
configure.in (arm*-*-eabi*): New target. * configure.in (arm*-*-eabi*): New target. * configure: Regenerate. * configure.ac (arm*-*-eabi*): New target. (arm*-*-symbianelf*): Likewise. * configure: Regenerated. * config.gcc (arm*-*-eabi*): New target. * defaults.h (TARGET_LIBGCC_FUNCS): New macro. (TARGET_LIB_INT_CMP_BIASED): Likewise. * expmed.c (expand_divmod): Try a two-valued divmod function as a last resort. * gthr.h: Remove bogus tokens at end of #pragma. * optabs.c (expand_twoval_binop_libfunc): New function. (prepare_cmp_insn): Handle the !TARGET_LIB_INT_CMP_BIASED case. (prepare_float_lib_cmp): Try reversing the condition. (debug_optab_libfuncs): New function. * optabs.h (expand_twoval_binop_libfunc): Declare. * config/arm/arm.c (arm_init_libfuncs): New function. (arm_compute_initial_eliminatino_offset): Return HOST_WIDE_INT. (TARGET_INIT_LIBFUNCS): Define it. * config/arm/arm.h (TARGET_BPABI): New macro. * config/arm/arm-protos.h (arm_compute_initial_elimination_offset): Return HOST_WIDE_INT. * config/arm/bpabi.S: New file. * config/arm/bpabi.c: Likewise. * config/arm/bpabi.h: Likewise. * config/arm/ieee754-df.S (__aeabi_dneg): New function or alias. (__aeabi_drsub): Likewise. (__aeabi_dsub): Likewise. (__aeabi_dadd): Likewise. (__aeabi_ui2d): Likewise. (__aeabi_i2d): Likewise. (__aeabi_f2d): Likewise. (__aeabi_dmul): Likewise. (__aeabi_ddiv): Likewise. (__aeabi_cdrcmple): Likewise. (__aeabi_cdcmpeq): Likewise. (__aeabi_cdcmple): Likewise. (__aeabi_dcmpeq): Likewise. (__aeabi_dcmplt): Likewise. (__aeabi_dcmple): Likewise. (__aeabi_dcmpge): Likewise. (__aeabi_dcmpgt): Likewise. (__aeabi_dcmpun): Likewise. (__aeabi_d2iz): Likewise. (__aeabi_d2uiz): Likewise. (__aeabi_d2f): Likewise. * config/arm/ieee754-sf.S (__aeabi_fneg): New function or alias. (__aeabi_frsub): Likewise. (__aeabi_fsub): Likewise. (__aeabi_fadd): Likewise. (__aeabi_ui2f): Likewise. (__aeabi_i2f): Likewise. (__aeabi_fmul): Likewise. (__aeabi_fdiv): Likewise. (__aeabi_cfrcmple): Likewise. (__aeabi_cfcmpeq): Likewise. (__aeabi_cfcmple): Likewise. (__aeabi_fcmpeq): Likewise. (__aeabi_fcmplt): Likewise. (__aeabi_fcmple): Likewise. (__aeabi_fcmpge): Likewise. (__aeabi_fcmpgt): Likewise. (__aeabi_fcmpun): Likewise. (__aeabi_f2iz): Likewise. (__aeabi_f2uiz): Likewise. * config/arm/lib1funcs.asm (ARM_CALL): New macro. (__aeabi_uidivmod): New function or alias. (__aeabi_idivmod): Likewise. (__aeabi_idiv0): Likewise. (__aeabi_ldiv0): Likewise. (__aeabi_llsr): Likewise. (__aeabi_lasr): Likewise. (__aeabi_llsl): Likewise. (bpabi.S): Include it. * config/arm/libgcc-bpabi.ver: New file. * config/arm/symbian.h (ARM_DEFAULT_ABI): Remove. (LINK_SPEC): Remove. * config/arm/t-arm-elf (LIB1ASMFUNCS): Add __aeabi_lcmp and __aeabi_ulcmp. * config/arm/t-bpabi: New file. * doc/tm.texi (TARGET_LIBGCC_FUNCS): New entry. (TARGET_LIB_INT_CMP_BIASED): Likewise. * gcc.dg/testsuite/gcc.dg/arm-eabi1.c: New test. * gcc.dg/dll-2.c: Fix dg-require syntax. * gcc.misc-tests/arm-isr.c (abort): Declare. (exit): Likewise. From-SVN: r85788
2004-08-11 04:50:14 +02:00
arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
configure.in (arm-*-linux-gnueabi): Add to noconfigdirs target-libffi... / * configure.in (arm-*-linux-gnueabi): Add to noconfigdirs target-libffi, target-qthreads, target-libjava, and targetlibobjc. * configure: Regenerate. gcc/ Merge from csl-arm-branch: 2005-09-07 Paul Brook <paul@codesourcery.com> * config/arm/linux-eabi.h (SUBTARGET_EXTRA_LINK_SPEC): Prepend a space to string. 2005-04-30 Paul Brook <paul@codesourcery.com> * config/arm/bpabi.h (TARGET_DEFAULT): Define. * config/arm/linux-eabi.h (SUBTARGET_CPU_DEFAULT): Define. 2005-03-07 Daniel Jacobowitz <dan@codesourcery.com> * config/arm/arm.c (arm_all_abis): Add aapcs-linux. (arm_override_options): Use TARGET_AAPCS_BASED. * config/arm/arm.h (enum arm_abi_type): Add ARM_ABI_AAPCS_LINUX. (PTRDIFF_TYPE): Use int for AAPCS. (DEFAULT_SHORT_ENUMS): Use false for aapcs-linux. * config/arm/linux-eabi.h (ARM_DEFAULT_ABI, WCHAR_TYPE): Define. (DEFAULT_SHORT_ENUMS): Delete. * doc/invoke.texi (ARM Options): Document -mabi=aapcs-linux. 2004-12-15 Daniel Jacobowitz <dan@codesourcery.com> * config/arm/arm.h (DEFAULT_SHORT_ENUMS): Wrap in #ifndef. * config/arm/linux-eabi.h (DEFAULT_SHORT_ENUMS): Define to 0. * config/arm/t-linux-eabi (TARGET_LIBGCC2_CFLAGS): Set to -fPIC. 2004-12-03 Mark Mitchell <mark@codesourcery.com> * config/arm/linux-eabi.h (LIBGCC_SPEC): Do not define. 2004-11-22 Mark Mitchell <mark@codesourcery.com> * config.gcc (arm*-*-linux-gnueabi): Use __cxa_atexit. 2004-11-19 Mark Mitchell <mark@codesourcery.com> * config.gcc (arm*-*-linux-gnueabi): Add it. * config/arm/bpabi.h (FPUTYPE_DEFAULT): Undefine it before redefining it. (TARGET_OS_CPP_BUILTINS): Likeiwse. * config/arm/linux-eabi.h: New file. * config/arm/linux-elf.h (LINUX_TARGET_INTERPRETER): New macro. (LINUX_TARET_LINK_SPEC): Likewise. (LINK_SPEC): Use it. * config/arm/t-linux-eabi: New file. libcpp/ * configure.ac: Require 64-bit int for arm*-*-*eabi*. * configure: Regenerate. libstdc++/ Merge from csl-arm-branch: 2004-12-15 Daniel Jacobowitz <dan@codesourcery.com> * libstdc++-v3/config/linker-map.gnu: Add ARM EABI symbols. From-SVN: r105121
2005-10-08 20:17:20 +02:00
arm*-*-linux-gnueabi)
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
noconfigdirs="$noconfigdirs target-libjava target-libobjc"
;;
arm*-*-symbianelf*)
noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
;;
1997-08-22 00:57:35 +02:00
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
thumb-*-coff)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
2000-07-22 10:08:22 +02:00
thumb-*-elf)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
thumb-*-pe)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
avr-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
bfin-*-*)
noconfigdirs="$noconfigdirs target-libgloss gdb"
if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
cris-*-* | crisv32-*-*)
unsupported_languages="$unsupported_languages java"
case "${target}" in
*-*-aout)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-elf)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
esac
;;
2004-08-02 18:58:38 +02:00
crx-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
2004-08-02 18:58:38 +02:00
;;
1997-08-22 00:57:35 +02:00
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
1997-08-22 00:57:35 +02:00
;;
1999-09-21 17:17:53 +02:00
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
1999-09-21 17:17:53 +02:00
;;
2002-06-18 23:58:44 +02:00
frv-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
1997-08-22 00:57:35 +02:00
h8500-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# the kernel only at this point and has no libc, and thus no
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
parisc*-*-linux* | hppa*-*-linux*)
;;
1997-08-22 00:57:35 +02:00
hppa*-*-*elf* | \
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
i960-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
2000-07-22 10:08:22 +02:00
ia64*-*-elf*)
# No gdb support yet.
noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
2000-07-22 10:08:22 +02:00
;;
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
ia64*-**-hpux*)
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
i370-*-opened*)
;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
i[[3456789]]86-*-linux*)
# The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
# not build java stuff by default.
case "${target}" in
*-*-*libc1*)
noconfigdirs="$noconfigdirs ${libgcj}";;
esac
# This section makes it possible to build newlib natively on linux.
# If we are using a cross compiler then don't configure newlib.
if test x${is_cross_compiler} != xno ; then
noconfigdirs="$noconfigdirs target-newlib"
fi
noconfigdirs="$noconfigdirs target-libgloss"
# If we are not using a cross compiler, do configure newlib.
# Note however, that newlib will only be configured in this situation
# if the --with-newlib option has been given, because otherwise
# 'target-newlib' will appear in skipdirs.
;;
i[[3456789]]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
*) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
;;
esac
;;
2000-07-22 10:08:22 +02:00
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib if winsup directory is present.
if test -d "$srcdir/winsup"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
elif test -d "$srcdir/newlib"; then
echo "Warning: winsup is missing so newlib can't be built."
fi
1997-08-22 00:57:35 +02:00
2000-07-22 10:08:22 +02:00
# Can't build gdb for Cygwin if not native.
1997-08-22 00:57:35 +02:00
case "${host}" in
2000-07-22 10:08:22 +02:00
*-*-cygwin*) ;; # keep gdb tcl tk expect etc.
*) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
1997-08-22 00:57:35 +02:00
;;
esac
;;
i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
;;
i[[3456789]]86-*-pe)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
i[[3456789]]86-*-sco3.2v5*)
1997-08-22 00:57:35 +02:00
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
i[[3456789]]86-*-sco*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
i[[3456789]]86-*-solaris2*)
noconfigdirs="$noconfigdirs target-libgloss"
1997-08-22 00:57:35 +02:00
;;
i[[3456789]]86-*-sysv4*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
m32r-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
2000-07-22 10:08:22 +02:00
m68k-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
m68k-*-coff*)
noconfigdirs="$noconfigdirs ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
mcore-*-pe*)
# The EPOC C++ environment does not support exceptions or rtti,
# and so building libstdc++-v3 tends not to always work.
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
unsupported_languages="$unsupported_languages fortran java"
;;
1997-08-22 00:57:35 +02:00
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
ms1-*-*)
noconfigdirs="$noconfigdirs sim"
;;
1997-08-22 00:57:35 +02:00
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
1997-08-22 00:57:35 +02:00
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
2000-07-22 10:08:22 +02:00
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
2000-07-22 10:08:22 +02:00
;;
1997-08-22 00:57:35 +02:00
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
m68k-apollo-*)
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
mips*-*-irix5*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
mips*-*-irix6*)
# Linking libjava exceeds command-line length limits on at least
# IRIX 6.2, but not on IRIX 6.5.
# Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
# <oldham@codesourcery.com>
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
mips*-*-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
mipstx39-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
;;
mips64*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib ${libgcj}"
;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
1997-08-22 00:57:35 +02:00
mips*-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
sh-*-* | sh64-*-*)
1997-08-22 00:57:35 +02:00
case "${host}" in
i[[3456789]]86-*-vsta) ;; # don't add gprof back in
i[[3456789]]86-*-go32*) ;; # don't add gprof back in
i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
1997-08-22 00:57:35 +02:00
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
2000-07-22 10:08:22 +02:00
sparclite-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
1997-08-22 00:57:35 +02:00
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs ${libgcj}"
if test x${is_cross_compiler} != xno ; then
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
1997-08-22 00:57:35 +02:00
else
use_gnu_ld=no
fi
;;
sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
1997-08-22 00:57:35 +02:00
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
v850-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
2000-07-22 10:08:22 +02:00
v850e-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
v850ea-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
2000-07-22 10:08:22 +02:00
;;
1997-08-22 00:57:35 +02:00
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
xtensa-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
1997-08-22 00:57:35 +02:00
*-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
1997-08-22 00:57:35 +02:00
;;
*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
1997-08-22 00:57:35 +02:00
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
# depends upon some newlib header files.
case "${noconfigdirs}" in
*target-libgloss*) ;;
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
1997-08-22 00:57:35 +02:00
# Work in distributions that contain no compiler tools, like Autoconf.
tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
m68k-hp-hpux*)
# Avoid "too much defining" errors from HPUX compiler.
tentative_cc="cc -Wp,-H256000"
# If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
# If it's HP/UX ar, this should be harmless.
RANLIB="ar ts"
;;
m68k-apollo-sysv*)
tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
;;
m68k-apollo-bsd*)
#None of the Apollo compilers can compile gas or binutils. The preprocessor
# chokes on bfd, the compiler won't let you assign integers to enums, and
# other problems. Defining CC to gcc is a questionable way to say "don't use
# the apollo compiler" (the preferred version of GCC could be called cc,
# or whatever), but I'm not sure leaving CC as cc is any better...
#CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
# Used to have BISON=yacc.
tentative_cc=gcc
;;
m88k-dg-dgux*)
tentative_cc="gcc -Wall -ansi -D__using_DGUX"
;;
m88k-harris-cxux*)
# Under CX/UX, we want to tell the compiler to use ANSI mode.
tentative_cc="cc -Xa"
host_makefile_frag="config/mh-cxux"
;;
m88k-motorola-sysv*)
;;
mips*-dec-ultrix*)
tentative_cc="cc -Wf,-XNg1000"
host_makefile_frag="config/mh-decstation"
;;
mips*-nec-sysv4*)
# The C compiler on NEC MIPS SVR4 needs bigger tables.
tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
host_makefile_frag="config/mh-necv4"
;;
mips*-sgi-irix4*)
# Tell compiler to use K&R C. We can't compile under the SGI Ansi
# environment. Also bump switch table size so that cp-parse will
# compile. Bump string length limit so linker builds.
tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
;;
mips*-*-sysv4*)
host_makefile_frag="config/mh-sysv4"
;;
mips*-*-sysv*)
# This is for a MIPS running RISC/os 4.52C.
# This is needed for GDB, but needs to be in the top-level make because
# if a library is compiled with the bsd headers and gets linked with the
# sysv system libraries all hell can break loose (e.g. a jmp_buf might be
# a different size).
# ptrace(2) apparently has problems in the BSD environment. No workaround is
# known except to select the sysv environment. Could we use /proc instead?
# These "sysv environments" and "bsd environments" often end up being a pain.
#
# This is not part of CFLAGS because perhaps not all C compilers have this
# option.
tentative_cc="cc -systype sysv"
;;
i370-ibm-opened*)
tentative_cc="c89"
;;
i[[3456789]]86-*-sysv5*)
host_makefile_frag="config/mh-sysv5"
;;
i[[3456789]]86-*-dgux*)
tentative_cc="gcc -Wall -ansi -D__using_DGUX"
host_makefile_frag="config/mh-dgux386"
;;
i[[3456789]]86-ncr-sysv4.3*)
# The MetaWare compiler will generate a copyright message unless you
# turn it off by adding the -Hnocopyr flag.
tentative_cc="cc -Hnocopyr"
;;
i[[3456789]]86-ncr-sysv4*)
# for an NCR 3000 (i486/SVR4) system.
# The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
# This compiler not only emits obnoxious copyright messages every time
# you run it, but it chokes and dies on a whole bunch of GNU source
# files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
tentative_cc="/usr/ccs/ATT/cc"
host_makefile_frag="config/mh-ncr3000"
;;
i[[3456789]]86-*-sco3.2v5*)
;;
i[[3456789]]86-*-sco*)
# The native C compiler botches some simple uses of const. Unfortunately,
# it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
tentative_cc="cc -Dconst="
host_makefile_frag="config/mh-sco"
;;
i[[3456789]]86-*-udk*)
host_makefile_frag="config/mh-sysv5"
;;
i[[3456789]]86-*-solaris2*)
host_makefile_frag="config/mh-sysv4"
;;
i[[3456789]]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-cygwin*)
host_makefile_frag="config/mh-cygwin"
;;
*-mingw32*)
;;
*-interix*)
host_makefile_frag="config/mh-interix"
;;
vax-*-ultrix2*)
# The old BSD pcc isn't up to compiling parts of gdb so use gcc
tentative_cc=gcc
;;
*-*-solaris2*)
host_makefile_frag="config/mh-solaris"
;;
m68k-sun-sunos*)
# Sun's C compiler needs the -J flag to be able to compile cp-parse.c
# without overflowing the jump tables (-J says to use a 32 bit table)
tentative_cc="cc -J"
;;
*-hp-hpux*)
tentative_cc="cc -Wp,-H256000"
;;
*-*-hiux*)
tentative_cc="cc -Wp,-H256000"
;;
rs6000-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
powerpc-*-darwin*)
host_makefile_frag="config/mh-ppc-darwin"
;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
;;
*-*-sysv4*)
host_makefile_frag="config/mh-sysv4"
;;
# This is placed last to prevent interfering with the cases above.
i[[3456789]]86-*-*)
# Build the stage2 and stage3 compilers with -fomit-frame-pointer.
host_makefile_frag="config/mh-x86omitfp"
;;
esac
fi
# If we aren't going to be using gcc, see if we can extract a definition
# of CC from the fragment.
# Actually, use the 'pre-extracted' version above.
if test -z "${CC}" && test "${build}" = "${host}" ; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
found=
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/gcc; then
found=yes
break
fi
done
IFS="$save_ifs"
if test -z "${found}" && test -n "${tentative_cc}" ; then
CC=$tentative_cc
fi
fi
if test "${build}" != "${host}" ; then
# If we are doing a Canadian Cross, in which the host and build systems
# are not the same, we set reasonable default values for the tools.
CC=${CC-${host_alias}-gcc}
CFLAGS=${CFLAGS-"-g -O2"}
CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
BUILD_PREFIX=${build_alias}-
BUILD_PREFIX_1=${build_alias}-
else
# Set reasonable default values for some tools even if not Canadian.
# Of course, these are different reasonable default values, originally
# specified directly in the Makefile.
# We don't export, so that autoconf can do its job.
# Note that all these settings are above the fragment inclusion point
# in Makefile.in, so can still be overridden by fragments.
# This is all going to change when we autoconfiscate...
CC_FOR_BUILD="\$(CC)"
BUILD_PREFIX=
BUILD_PREFIX_1=loser-
AC_PROG_CC
# We must set the default linker to the linker used by gcc for the correct
# operation of libtool. If LD is not defined and we are using gcc, try to
# set the LD default to the ld used by gcc.
if test -z "$LD"; then
if test "$GCC" = yes; then
case $build in
*-*-mingw*)
gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
*)
gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
esac
case $gcc_prog_ld in
# Accept absolute paths.
[[\\/]* | [A-Za-z]:[\\/]*)]
LD="$gcc_prog_ld" ;;
esac
fi
fi
CXX=${CXX-"c++"}
CFLAGS=${CFLAGS-"-g"}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
fi
ACX_PROG_GNAT
ACX_PROG_CMP_IGNORE_INITIAL
# Check for GMP and MPFR
gmplibs=
gmpinc=
have_gmp=yes
# Specify a location for mpfr
# check for this first so it ends up on the link line before gmp.
AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH Specify source directory for MPFR library])
if test "x$with_mpfr_dir" != x; then
gmpinc="-I$with_mpfr_dir"
gmplibs="$with_mpfr_dir/libmpfr.a"
else
gmplibs="-lmpfr"
fi
AC_ARG_WITH(mpfr, [ --with-mpfr=PATH Specify directory for installed MPFR library])
if test "x$with_mpfr" != x; then
gmplibs="-L$with_mpfr/lib $gmplibs"
gmpinc="-I$with_mpfr/include"
fi
# Specify a location for gmp
AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH Specify source directory for GMP library])
if test "x$with_gmp_dir" != x; then
gmpinc="$gmpinc -I$with_gmp_dir"
if test -f "$with_gmp_dir/.libs/libgmp.a"; then
gmplibs="$gmplibs $with_gmp_dir/.libs/libgmp.a"
elif test -f "$with_gmp_dir/_libs/libgmp.a"; then
gmplibs="$gmplibs $with_gmp_dir/_libs/libgmp.a"
fi
# One of the later tests will catch the error if neither library is present.
else
gmplibs="$gmplibs -lgmp"
fi
AC_ARG_WITH(gmp, [ --with-gmp=PATH Specify directory for installed GMP library])
if test "x$with_gmp" != x; then
gmplibs="-L$with_gmp/lib $gmplibs"
gmpinc="-I$with_gmp/include $gmpinc"
fi
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
AC_MSG_CHECKING([for correct version of gmp.h])
AC_TRY_COMPILE([#include "gmp.h"],[
#if __GNU_MP_VERSION < 3
choke me
#endif
], [AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no]); have_gmp=no])
if test x"$have_gmp" = xyes; then
AC_MSG_CHECKING([for MPFR])
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
AC_TRY_LINK([#include <gmp.h>
#include <mpfr.h>], [mpfr_t n; mpfr_init(n);],
[AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
LIBS="$saved_LIBS"
CFLAGS="$saved_CFLAGS"
fi
# Flags needed for both GMP and/or MPFR
AC_SUBST(gmplibs)
AC_SUBST(gmpinc)
# By default, C is the only stage 1 language.
stage1_languages=c
AC_SUBST(stage1_languages)
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
# go away some day.
# NB: embedded tabs in this IF block -- do not untabify
if test -d ${srcdir}/gcc; then
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
enable_languages="${LANGUAGES}"
echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
else
enable_languages=all
fi
else
if test x"${enable_languages}" = x ||
test x"${enable_languages}" = xyes;
then
echo configure.in: --enable-languages needs at least one language argument 1>&2
exit 1
fi
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
# 'f95' is the old name for the 'fortran' language. We issue a warning
# and make the substitution.
case ,${enable_languages}, in
*,f95,*)
echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
;;
esac
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
# From the config-lang.in, get $language, $lang_requires
language=
lang_requires=
. ${lang_frag}
for other in ${lang_requires} ; do
case ,${enable_languages}, in
*,$other,*) ;;
*,all,*) ;;
*,$language,*)
echo " \`$other' language required by \`$language'; enabling" 1>&2
enable_languages="${enable_languages},${other}"
;;
esac
done
;;
esac
done
new_enable_languages=c
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=c
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
# From the config-lang.in, get $language, $target_libs,
# $lang_dirs, $boot_language, and $build_by_default
language=
target_libs=
lang_dirs=
boot_language=
build_by_default=
need_gmp=
. ${lang_frag}
potential_languages="${potential_languages},${language}"
# This is quite sensitive to the ordering of the case statement arms.
case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
*::*:*)
echo "${lang_frag} doesn't set \$language." 1>&2
exit 1
;;
*:ada:no:*)
# Ada was requested with no preexisting GNAT. Disable unconditionally.
add_this_lang=no
;;
*,${language},*:*:*:*)
# Language was explicitly selected; include it.
add_this_lang=yes
;;
*,all,*:*:*:no)
# 'all' was selected, but this is not a default language
# so do not include it.
add_this_lang=no
;;
*,all,*:*:*:*)
# 'all' was selected and this is a default language; include it.
add_this_lang=yes
;;
*)
add_this_lang=no
;;
esac
# Disable languages that need GMP if it isn't available.
case ,${enable_languages},:${have_gmp}:${need_gmp} in
*,${language},*:no:yes)
# Specifically requested language; tell them.
AC_MSG_ERROR([GMP with MPFR support is required to build $language])
;;
*:no:yes)
# Silently disable.
add_this_lang=no
;;
esac
# Disable a language that is unsupported by the target.
case " $unsupported_languages " in
*" $language "*)
add_this_lang=no
;;
esac
case $add_this_lang in
no)
# Remove language-dependent dirs.
eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
;;
*)
new_enable_languages="$new_enable_languages,$language"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
case ${boot_language} in
yes)
# Add to (comma-separated) list of stage 1 languages.
stage1_languages="${stage1_languages},${language}"
;;
esac
;;
esac
;;
esac
done
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
AC_MSG_ERROR([
The following requested languages could not be built: ${missing_languages}
Recognised languages are: ${potential_languages}])
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
echo The following languages will be built: ${new_enable_languages}
fi
enable_languages="$new_enable_languages"
ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
notsupp="$notsupp $dir"
fi
fi
fi
if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
notsupp="$notsupp $dir"
fi
fi
fi
if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
notsupp="$notsupp $dir"
fi
fi
fi
done
# Sometimes the tools are distributed with libiberty but with no other
# libraries. In that case, we don't want to build target-libiberty.
if test -n "${target_configdirs}" ; then
others=
for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
if test "$i" != "libiberty" ; then
if test -r $srcdir/$i/configure ; then
others=yes;
break;
fi
fi
done
if test -z "${others}" ; then
target_configdirs=
fi
fi
# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
build_configdirs_all="$build_configdirs"
build_configdirs=
for i in ${build_configdirs_all} ; do
j=`echo $i | sed -e s/build-//g`
if test -f ${srcdir}/$j/configure ; then
build_configdirs="${build_configdirs} $i"
fi
done
configdirs_all="$configdirs"
configdirs=
for i in ${configdirs_all} ; do
if test -f ${srcdir}/$i/configure ; then
configdirs="${configdirs} $i"
fi
done
target_configdirs_all="$target_configdirs"
target_configdirs=
for i in ${target_configdirs_all} ; do
j=`echo $i | sed -e s/target-//g`
if test -f ${srcdir}/$j/configure ; then
target_configdirs="${target_configdirs} $i"
fi
done
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# supported by the one or two programs in a package.
if test -n "${notsupp}" && test -z "${norecursion}" ; then
# If $appdirs is non-empty, at least one of those directories must still
# be configured, or we error out. (E.g., if the gas release supports a
# specified target in some subdirs but not the gas subdir, we shouldn't
# pretend that all is well.)
if test -n "$appdirs" ; then
for dir in $appdirs ; do
if test -r $dir/Makefile.in ; then
if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
appdirs=""
break
fi
if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
appdirs=""
break
fi
fi
done
if test -n "$appdirs" ; then
echo "*** This configuration is not supported by this package." 1>&2
exit 1
fi
fi
# Okay, some application will build, or we don't care to check. Still
# notify of subdirs not getting built.
echo "*** This configuration is not supported in the following subdirectories:" 1>&2
echo " ${notsupp}" 1>&2
echo " (Any other directories should still work fine.)" 1>&2
fi
case "$host" in
*msdosdjgpp*)
enable_gdbtk=no ;;
esac
copy_dirs=
AC_ARG_WITH([build-sysroot],
[ --with-build-sysroot=sysroot
use sysroot as the system root during the build],
[if test x"$withval" != x ; then
SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
fi],
[SYSROOT_CFLAGS_FOR_TARGET=])
AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-headers is only supported when cross compiling
exit 1
fi
if test x"${with_headers}" != xyes ; then
case "${exec_prefixoption}" in
"") x=${prefix} ;;
*) x=${exec_prefix} ;;
esac
copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
fi
fi
# Handle --with-libs=XXX. If the value is not "yes", the contents of
# the name directories are copied to $(tooldir)/lib. Multiple directories
# are permitted.
if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-libs is only supported when cross compiling
exit 1
fi
if test x"${with_libs}" != xyes ; then
# Copy the libraries in reverse order, so that files in the first named
# library override files in subsequent libraries.
case "${exec_prefixoption}" in
"") x=${prefix} ;;
*) x=${exec_prefix} ;;
esac
for l in ${with_libs}; do
copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
done
fi
fi
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
while test $# != 0 ; do
if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
:
else
echo Copying $1 to $2
# Use the install script to create the directory and all required
# parent directories.
if test -d $2 ; then
:
else
echo >config.temp
${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
fi
# Copy the directory, assuming we have tar.
# FIXME: Should we use B in the second tar? Not all systems support it.
(cd $1; tar -cf - .) | (cd $2; tar -xpf -)
# It is the responsibility of the user to correctly adjust all
# symlinks. If somebody can figure out how to handle them correctly
# here, feel free to add the code.
echo $1 > $2/COPIED
fi
shift; shift
done
extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
configure.in: Remove target-libstdc++-v3 from noconfigdirs for *-*-netware... / * configure.in: Remove target-libstdc++-v3 from noconfigdirs for *-*-netware, but add target-libmudflap. Consolidate *-*-netware targets (of which really only i?86 exists) into a single entry. * configure: Likewise. gcc/ * config.gcc: Resurrect NetWare as a target. Handle special case of Novell linker to be used (specified through --with-ld=) and threading model of either Posix (default) or NKS. * config/i386/i386.c (ix86_return_pops_args): Conditionalize popping of incoming hidden argument on KEEP_AGGREGATE_RETURN_POINTER. * config/i386/i386.h (KEEP_AGGREGATE_RETURN_POINTER): New. * config/i386/netware.c, config/i386/netware.h: New. * config/i386/nwld.c, config/i386/nwld.h: New. * config/i386/netware-crt0.c: New. * config/i386/netware-libgcc.c: New. * config/i386/netware-libgcc.def: New. * config/i386/netware-libgcc.exp: New. * config/i386/t-netware, config/i386/t-nwld: New. * gthr-nks.h: New. * doc/install.texi: Document NKS threading model. gcc/cp/ * g++spec.c (MATH_LIBRARY_PROFILE): Default to MATH_LIBRARY rather than "-lm". gcc/testsuite/ * g++.dg/abi/bitfield5.C: Use -mno-ms-bitfields. * g++.old-deja/g++.jason/thunk2.C: xfail for NetWare. * g++.old-deja/g++.law/profile1.C: xfail for NetWare. * g++.old-deja/g++.other/store-expr1.C: xfail for NetWare. * gcc.c-torture/compile/20001109-1.c: xfail for NetWare. * gcc.c-torture/compile/20001109-2.c: xfail for NetWare. * gcc.c-torture/execute/multi-ix.c: Use __builtin_bzero rather than the non-portable bzero. * gcc.dg/20010912-1.c: xfail for NetWare. * gcc.dg/20020426-2.c: xfail for NetWare. * gcc.dg/20021014-1.c: xfail for NetWare. * gcc.dg/20021018-1.c: xfail for NetWare. * gcc.dg/20030213-1.c: xfail for NetWare. * gcc.dg/20030225-1.c: xfail for NetWare. * gcc.dg/20030708-1.c: xfail for NetWare. * gcc.dg/builtins-config.h: Also exclude NetWare. * gcc.dg/format/format.h: Define restrict only if not already defined. * gcc.dg/nest.c: xfail for NetWare. * gcc.dg/special/gcsec-1.c: Don't pass -static for NetWare. * lib/target-supports.exp (check_visibility_available): Exclude NetWare. fixincludes/ * inclhack.def: Suppress exception_structure and math_exception for NetWare headers. * fixincl.x: Regenerate. libstdc++-v3/ * crossconfig.m4: Add NetWare as a target. * configure: Regenerate. From-SVN: r87040
2004-09-03 20:10:08 +02:00
*-*-netware*)
target_makefile_frag="config/mt-netware"
;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
target_makefile_frag="config/mt-gnu"
;;
*-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
# nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
# commands to handle both 32-bit and 64-bit objects. These flags are
# harmless if we're using GNU nm or ar.
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
*-*-darwin*)
# ranlib from Darwin requires the -c flag to look at common symbols.
extra_ranlibflags_for_target=" -c"
;;
mips*-*-pe | sh*-*-pe | *arm-wince-pe)
target_makefile_frag="config/mt-wince"
;;
esac
alphaieee_frag=/dev/null
case $target in
alpha*-*-*)
# This just makes sure to use the -mieee option to build target libs.
# This should probably be set individually by each library.
alphaieee_frag="config/mt-alphaieee"
;;
esac
# If --enable-target-optspace always use -Os instead of -O2 to build
# the target libraries, similarly if it is not specified, use -Os
# on selected platforms.
ospace_frag=/dev/null
case "${enable_target_optspace}:${target}" in
yes:*)
ospace_frag="config/mt-ospace"
;;
:d30v-*)
ospace_frag="config/mt-d30v"
;;
:m32r-* | :d10v-* | :fr30-*)
ospace_frag="config/mt-ospace"
;;
no:* | :*)
;;
*)
echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
;;
esac
1997-08-22 00:57:35 +02:00
# Set with_gnu_as and with_gnu_ld as appropriate.
#
# This is done by determining whether or not the appropriate directory
# is available, and by checking whether or not specific configurations
# have requested that this magic not happen.
#
# The command line options always override the explicit settings in
# configure.in, and the settings in configure.in override this magic.
#
# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
# --without-gnu-ld options for the configure script.
if test x${use_gnu_as} = x &&
echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
with_gnu_as=yes
extra_host_args="$extra_host_args --with-gnu-as"
1997-08-22 00:57:35 +02:00
fi
if test x${use_gnu_ld} = x &&
echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
with_gnu_ld=yes
extra_host_args="$extra_host_args --with-gnu-ld"
1997-08-22 00:57:35 +02:00
fi
# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
1997-08-22 00:57:35 +02:00
# can detect this case.
if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
1997-08-22 00:57:35 +02:00
with_newlib=yes
extra_host_args="$extra_host_args --with-newlib"
1997-08-22 00:57:35 +02:00
fi
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
mips*-*-irix[[56]]*)
;;
mips*-*-* | alpha*-*-osf*)
with_stabs=yes;
extra_host_args="${extra_host_args} --with-stabs"
;;
esac
fi
# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
# them automatically.
case "${host}" in
hppa*64*-*-hpux11*)
extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
;;
esac
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
AC_CHECK_PROGS([CONFIGURED_BISON], [bison], [$MISSING bison])
AC_CHECK_PROGS([CONFIGURED_YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
AC_CHECK_PROGS([CONFIGURED_M4], [gm4 gnum4 m4], [$MISSING m4])
AC_CHECK_PROGS([CONFIGURED_FLEX], [flex], [$MISSING flex])
AC_CHECK_PROGS([CONFIGURED_LEX], [flex lex], [$MISSING flex])
AC_CHECK_PROGS([CONFIGURED_MAKEINFO], makeinfo, [$MISSING makeinfo])
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
if test -r ${srcdir}/.gdbinit ; then
case ${srcdir} in
.) ;;
*) cat > ./.gdbinit <<EOF
# ${NO_EDIT}
dir ${srcdir}
dir .
source ${srcdir}/.gdbinit
EOF
;;
esac
fi
1997-08-22 00:57:35 +02:00
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
# can be created. At this point the main configure script has set CC.
we_are_ok=no
1997-08-22 00:57:35 +02:00
echo "int main () { return 0; }" > conftest.c
${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
if test $? = 0 ; then
if test -s conftest || test -s conftest.exe ; then
we_are_ok=yes
fi
fi
case $we_are_ok in
no)
echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
echo 1>&2 "*** You must set the environment variable CC to a working compiler."
rm -f conftest*
exit 1
;;
esac
1997-08-22 00:57:35 +02:00
rm -f conftest*
# The Solaris /usr/ucb/cc compiler does not appear to work.
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
1997-08-22 00:57:35 +02:00
could_use=
test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
if test -d /opt/cygnus/bin ; then
if test "$could_use" = "" ; then
1997-08-22 00:57:35 +02:00
could_use="/opt/cygnus/bin"
else
could_use="$could_use or /opt/cygnus/bin"
fi
fi
if test "$could_use" = "" ; then
1997-08-22 00:57:35 +02:00
echo "Warning: compilation may fail because you're using"
echo "/usr/ucb/cc. You should change your PATH or CC "
echo "variable and rerun configure."
else
echo "Warning: compilation may fail because you're using"
echo "/usr/ucb/cc, when you should use the C compiler from"
echo "$could_use. You should change your"
echo "PATH or CC variable and rerun configure."
fi
fi
;;
esac
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
*-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
# In fact I believe gdb is the *only* package directly dependent on tk,
# so we should be able to put the 'maybe's in unconditionally and
# leave out the maybe dependencies when enable_gdbtk is false. I'm not
# 100% sure that that's safe though.
gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
case "$enable_gdbtk" in
no)
GDB_TK="" ;;
yes)
GDB_TK="${gdb_tk}" ;;
*)
# Only add the dependency on gdbtk when GDBtk is part of the gdb
# distro. Eventually someone will fix this and move Insight, nee
# gdbtk to a separate directory.
if test -d ${srcdir}/gdb/gdbtk ; then
GDB_TK="${gdb_tk}"
else
GDB_TK=""
fi
;;
esac
# Strip out unwanted targets.
# While at that, we remove Makefiles if we were started for recursive
# configuration, so that the top-level Makefile reconfigures them,
# like we used to do when configure itself was recursive.
# Loop over modules. $extrasub must be used with care, limiting as
# much as possible the usage of range addresses. That's because autoconf
# splits the sed script to overcome limits in the number of commands,
# and relying on carefully-timed sed passes may turn out to be very hard
# to maintain later. In this particular case, you just have to be careful
# not to nest @if/@endif pairs, because configure will not warn you at all.
AC_ARG_ENABLE([bootstrap],
[ --enable-bootstrap[=lean] Enable bootstrapping [no]],,
enable_bootstrap=default)
# Issue errors and warnings for invalid/strange bootstrap combinations.
case "$configdirs" in
*gcc*) have_compiler=yes ;;
*) have_compiler=no ;;
esac
case "$have_compiler:$host:$target:$enable_bootstrap" in
*:*:*:no) ;;
# Default behavior. (We'll) enable bootstrap if we have a compiler
# and we are in a native configuration.
yes:$build:$build:default)
# This will become 'yes'
enable_bootstrap=no ;;
*:*:*:default)
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
yes:$build:$build:yes | yes:$build:$build:lean)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
yes:*:*:yes | yes:*:*:lean)
AC_MSG_WARN([trying to bootstrap a cross compiler])
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
no:*:*:yes | no:*:*:lean)
AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
# Fail if wrong command line
*)
AC_MSG_ERROR([invalid option for --enable-bootstrap])
;;
esac
# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
bootstrap_lean='#'
bootstrap_suffix=bootstrap ;;
lean)
bootstrap_lean=''
bootstrap_suffix=bootstrap ;;
no)
bootstrap_suffix=no-bootstrap ;;
esac
AC_SUBST(bootstrap_lean)
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
rm -f ${build_subdir}/${module}/Makefile
fi
extrasub="$extrasub
/^@if build-$module\$/d
/^@endif build-$module\$/d
/^@if build-$module-$bootstrap_suffix\$/d
/^@endif build-$module-$bootstrap_suffix\$/d"
done
for module in ${configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${module}/Makefile; then
echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
rm -f ${module}/Makefile
fi
extrasub="$extrasub
/^@if $module\$/d
/^@endif $module\$/d
/^@if $module-$bootstrap_suffix\$/d
/^@endif $module-$bootstrap_suffix\$/d"
done
for module in ${target_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${target_subdir}/${module}/Makefile; then
echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
rm -f ${target_subdir}/${module}/Makefile
fi
extrasub="$extrasub
/^@if target-$module\$/d
/^@endif target-$module\$/d
/^@if target-$module-$bootstrap_suffix\$/d
/^@endif target-$module-$bootstrap_suffix\$/d"
done
extrasub="$extrasub
/^@if /,/^@endif /d"
# Create the serialization dependencies. This uses a temporary file.
AC_ARG_ENABLE([serial-configure],
[ --enable-serial-[{host,target,build}-]configure
Force sequential configuration of
sub-packages for the host, target or build
machine, or all sub-packages])
case ${enable_serial_configure} in
yes)
enable_serial_build_configure=yes
enable_serial_host_configure=yes
enable_serial_target_configure=yes
;;
esac
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
echo '# serdep.tmp' > serdep.tmp
olditem=
test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
*) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
olditem=
test "x${enable_serial_host_configure}" = xyes &&
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
*) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
olditem=
test "x${enable_serial_target_configure}" = xyes &&
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
*) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
serialization_dependencies=serdep.tmp
AC_SUBST_FILE(serialization_dependencies)
# Base args. Strip norecursion, cache-file, srcdir, host, build,
# target and nonopt. These are the ones we might not want to pass
# down to subconfigures. Also strip program-prefix, program-suffix,
# and program-transform-name, so that we can pass down a consistent
# program-transform-name. If autoconf has put single quotes around
# any of these arguments (because they contain shell metacharacters)
# then this will fail; in practice this only happens for
# --program-transform-name, so be sure to override --program-transform-name
# at the end of the argument list.
# These will be expanded by make, so quote '$'.
cat <<\EOF_SED > conftestsed
s/ --no[[^ ]]*/ /g
s/ --c[[a-z-]]*[[= ]][[^ ]]*//g
s/ --sr[[a-z-]]*[[= ]][[^ ]]*//g
s/ --ho[[a-z-]]*[[= ]][[^ ]]*//g
s/ --bu[[a-z-]]*[[= ]][[^ ]]*//g
s/ --t[[a-z-]]*[[= ]][[^ ]]*//g
s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]*//g
s/ -cache-file[[= ]][[^ ]]*//g
s/ -srcdir[[= ]][[^ ]]*//g
s/ -host[[= ]][[^ ]]*//g
s/ -build[[= ]][[^ ]]*//g
s/ -target[[= ]][[^ ]]*//g
s/ -program-prefix[[= ]][[^ ]]*//g
s/ -program-suffix[[= ]][[^ ]]*//g
s/ -program-transform-name[[= ]][[^ ]]*//g
s/ [[^' -][^ ]*] / /
s/^ *//;s/ *$//
s,\$,$$,g
EOF_SED
sed -f conftestsed <<EOF_SED > conftestsed.out
${ac_configure_args}
EOF_SED
baseargs=`cat conftestsed.out`
rm -f conftestsed conftestsed.out
1997-08-22 00:57:35 +02:00
# Add in --program-transform-name, after --program-prefix and
# --program-suffix have been applied to it. Autoconf has already
# doubled dollar signs and backslashes in program_transform_name; we want
# the backslashes un-doubled, and then the entire thing wrapped in single
# quotes, because this will be expanded first by make and then by the shell.
# Also, because we want to override the logic in subdir configure scripts to
# choose program_transform_name, replace any s,x,x, with s,y,y,.
sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
${program_transform_name}
EOF_SED
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# desired.
build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} --target=${target_alias} ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
"") # empty
cache_file_option="" ;;
/* | [[A-Za-z]]:[[\\/]]* ) # absolute path
cache_file_option="--cache-file=${cache_file}" ;;
*) # relative path
cache_file_option="--cache-file=../${cache_file}" ;;
esac
# Host dirs don't like to share a cache file either, horribly enough.
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
target_configargs=${baseargs}
1997-08-22 00:57:35 +02:00
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# native. However, it would be better to use other mechanisms to make the
# sorts of decisions they want to make on this basis. Please consider
# this option to be deprecated. FIXME.
if test x${is_cross_compiler} = xyes ; then
target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
1997-08-22 00:57:35 +02:00
fi
# Default to --enable-multilib.
if test x${enable_multilib} = x ; then
target_configargs="--enable-multilib ${target_configargs}"
1997-08-22 00:57:35 +02:00
fi
# Pass --with-newlib if appropriate. Note that target_configdirs has
# changed from the earlier setting of with_newlib.
if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
target_configargs="--with-newlib ${target_configargs}"
fi
# Different target subdirs use different values of certain variables
# (notably CXX). Worse, multilibs use *lots* of different values.
# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
# it doesn't automatically accept command-line overrides of them.
# This means it's not safe for target subdirs to share a cache file,
# which is disgusting, but there you have it. Hopefully this can be
# fixed in future. It's still worthwhile to use a cache file for each
# directory. I think.
# Pass the appropriate --build, --host, --target and --cache-file arguments.
# We need to pass --target, as newer autoconf's requires consistency
# for target_alias and gcc doesn't manage it consistently.
target_configargs="--cache-file=./config.cache --build=${build_alias} --host=${target_alias} --target=${target_alias} ${target_configargs}"
FLAGS_FOR_TARGET=
case " $target_configdirs " in
*" newlib "*)
case " $target_configargs " in
*" --with-newlib "*)
case "$target" in
*-cygwin*)
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
esac
# If we're not building GCC, don't discard standard headers.
if test -d ${srcdir}/gcc; then
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
if test "${build}" != "${host}"; then
# On Canadian crosses, CC_FOR_TARGET will have already been set
# by `configure', so we won't have an opportunity to add -Bgcc/
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
re PR bootstrap/17383 (Building in src dir fails) 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.def (target_modules): Remove "stage", now unnecessary. * Makefile.tpl (HOST_SUBDIR): New substitution. (STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET, USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET, USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET, USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it. (Host modules, Bootstrapped modules): Use it. (Build modules, Target modules): Do not create symlink trees, always configure out-of-srcdir. (distclean): Try removing $(host_subdir) with rm before using rm -rf. * configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET, GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use $(HOST_SUBDIR). Create a symlink for host_subdir. * Makefile.in: Regenerate. * configure: Regenerate. config: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * config/acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src gcc build is going. gcc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * gcc/Makefile.in (host_subdir): New. (build_objdir): New. Replace ../$(build_subdir) with it throughout. * gcc/configure: Regenerate. libada: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.in (GCC_DIR): Add $(HOST_SUBDIR) to the definition. libjava: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (COMPPATH): Removed. (ZIP, GCJH): Replace it with ../$(host_subdir). (built_gcc_dir): Add $(host_subdir). * configure: Regenerate. * Makefile.in, include/Makefile.in, testsuite/Makefile.in, gcj/Makefile.in, external/Makefile.in, external/sax/Makefile.in, external/w3c_dom/Makefile.in: Regenerate. libobjc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (Determine CFLAGS for gthread): Use $host_subdir. * configure: Regenerate. * Makefile.in (host_subdir): New. (INCLUDES): Use it. From-SVN: r95680
2005-02-28 14:26:36 +01:00
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
# compatible with the compiler being built. In this case, it
# would be better to flag an error than risking having
# incompatible object files being constructed. We can't
# guarantee that an error will be flagged, but let's hope the
# compiler will do it, when presented with incompatible header
# files.
fi
fi
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
case "${target}-${is_cross_compiler}" in
i[[3456789]]86-*-linux*-no)
i2002-04-11 DJ Delorie <dj@redhat.com> * Makefile.in, configure.in: Sync with binutils, entries follow... 2002-02-01 Mo DeJong <supermo@bayarea.net> * Makefile.in: Add all-tix to deps for all-snavigator so that tix is built when building snavigator. 2002-01-11 Steve Ellcey <sje@cup.hp.com> * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX, ld and gdb are not supported. 2002-01-07 Mark Salter <msalter@redhat.com> * configure.in: Remove target-bsp and target-cygmon from arm builds. Allow target-libgloss to be built for arm, strongarm, and xscale. 2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com> * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem options for i[3456]86-pc-linux* native builds. 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo files from .po files for a distribution. 2001-09-03 Jeff Holcomb <jeffh@redhat.com> * configure.in: Enable libstdc++-v3 for h8300 targets. 2001-06-19 Alan Modra <amodra@bigpond.net.au> * Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/. Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (VER): When present, extract the version number from the file version.in. 2001-05-24 Tom Rix <trix@redhat.com> * configure.in : enable ld for aix 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * mh-s390pic: New file. * mt-s390pic: New file. 2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com> * config.guess: Add linux target for S/390. 2000-11-07 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*. 2000-11-03 Philip Blundell <pb@futuretv.com> * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info files. 2001-01-15 Ben Elliston <bje@redhat.com> * configure.in (host_tools): Add sid. Always configure cgen. 2000-11-24 Nick Clifton <nickc@redhat.com> * configure.in (c4x, c5x, tic54x): Move after ARM targets. 2000-08-20 Doug Evans <dje@casey.transmeta.com> * Makefile.in (ALL_MODULES): Add all-cgen. (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily. (all-cgen): New target. (all-opcodes,all-sim): Depend on all-cgen. * configure.in (host_tools): Add cgen. Only configure cgen if --enable-cgen-maint. From-SVN: r52179
2002-04-11 23:23:35 +02:00
# Here host == target, so we don't need to build gcc,
# so we don't want to discard standard headers.
FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
;;
*)
# If we're building newlib, use its generic headers last, but search
# for any libc-related directories first (so make it the last -B
# switch).
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
;;
esac
;;
esac
;;
esac
# Allow the user to override the flags for
# our build compiler if desired.
CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
# On Canadian crosses, we'll be searching the right directories for
# the previously-installed cross compiler, so don't bother to add
# flags for directories within the install tree of the compiler
# being built; programs in there won't even run.
if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
# Search for pre-installed headers if nothing else fits.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
fi
if test "x${use_gnu_ld}" = x &&
echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
re PR bootstrap/17383 (Building in src dir fails) 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.def (target_modules): Remove "stage", now unnecessary. * Makefile.tpl (HOST_SUBDIR): New substitution. (STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET, USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET, USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET, USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it. (Host modules, Bootstrapped modules): Use it. (Build modules, Target modules): Do not create symlink trees, always configure out-of-srcdir. (distclean): Try removing $(host_subdir) with rm before using rm -rf. * configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET, GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use $(HOST_SUBDIR). Create a symlink for host_subdir. * Makefile.in: Regenerate. * configure: Regenerate. config: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * config/acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src gcc build is going. gcc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * gcc/Makefile.in (host_subdir): New. (build_objdir): New. Replace ../$(build_subdir) with it throughout. * gcc/configure: Regenerate. libada: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.in (GCC_DIR): Add $(HOST_SUBDIR) to the definition. libjava: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (COMPPATH): Removed. (ZIP, GCJH): Replace it with ../$(host_subdir). (built_gcc_dir): Add $(host_subdir). * configure: Regenerate. * Makefile.in, include/Makefile.in, testsuite/Makefile.in, gcj/Makefile.in, external/Makefile.in, external/sax/Makefile.in, external/w3c_dom/Makefile.in: Regenerate. libobjc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (Determine CFLAGS for gthread): Use $host_subdir. * configure: Regenerate. * Makefile.in (host_subdir): New. (INCLUDES): Use it. From-SVN: r95680
2005-02-28 14:26:36 +01:00
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
# Makefile fragments.
for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
do
eval fragval=\$$frag
if test $fragval != /dev/null; then
eval $frag=${srcdir}/$fragval
fi
done
AC_SUBST_FILE(host_makefile_frag)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST_FILE(alphaieee_frag)
AC_SUBST_FILE(ospace_frag)
# Miscellanea: directories, flags, etc.
AC_SUBST(RPATH_ENVVAR)
AC_SUBST(BUILD_PREFIX)
AC_SUBST(BUILD_PREFIX_1)
AC_SUBST(tooldir)
AC_SUBST(build_tooldir)
AC_SUBST(GDB_TK)
# Build module lists & subconfigure args.
AC_SUBST(build_configargs)
AC_SUBST(build_configdirs)
# Host module lists & subconfigure args.
AC_SUBST(host_configargs)
AC_SUBST(configdirs)
# Target module lists & subconfigure args.
AC_SUBST(target_configargs)
AC_SUBST(target_configdirs)
# Build tools.
AC_SUBST(CC_FOR_BUILD)
AC_SUBST(config_shell)
# Host tools.
NCN_STRICT_CHECK_TOOLS(AR, ar)
NCN_STRICT_CHECK_TOOLS(AS, as)
NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool)
NCN_STRICT_CHECK_TOOLS(LD, ld)
NCN_STRICT_CHECK_TOOLS(NM, nm)
NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, :)
NCN_STRICT_CHECK_TOOLS(WINDRES, windres)
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
AC_SUBST(CFLAGS_FOR_BUILD)
AC_SUBST(CXXFLAGS)
# Target tools. Do the tests using the names they may have passed in
# the environment, then move it to CONFIGURED_*_FOR_TARGET.
NCN_STRICT_CHECK_TARGET_TOOLS(AR_FOR_TARGET, ar)
NCN_STRICT_CHECK_TARGET_TOOLS(AS_FOR_TARGET, as)
NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc)
NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx)
NCN_STRICT_CHECK_TARGET_TOOLS(DLLTOOL_FOR_TARGET, dlltool)
NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj)
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
NCN_STRICT_CHECK_TARGET_TOOLS(LD_FOR_TARGET, ld)
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
NCN_STRICT_CHECK_TARGET_TOOLS(LIPO_FOR_TARGET, lipo)
NCN_STRICT_CHECK_TARGET_TOOLS(NM_FOR_TARGET, nm)
NCN_STRICT_CHECK_TARGET_TOOLS(OBJDUMP_FOR_TARGET, objdump)
NCN_STRICT_CHECK_TARGET_TOOLS(RANLIB_FOR_TARGET, ranlib, :)
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
NCN_STRICT_CHECK_TARGET_TOOLS(STRIP_FOR_TARGET, strip)
NCN_STRICT_CHECK_TARGET_TOOLS(WINDRES_FOR_TARGET, windres)
CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET"
CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
CONFIGURED_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET"
CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET"
CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
AC_SUBST(CONFIGURED_AR_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_AS_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_CC_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_CXX_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_DLLTOOL_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_GCC_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_GCJ_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_GFORTRAN_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_LD_FOR_TARGET)dnl
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
AC_SUBST(CONFIGURED_LIPO_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_NM_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_OBJDUMP_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_RANLIB_FOR_TARGET)dnl
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
AC_SUBST(CONFIGURED_STRIP_FOR_TARGET)dnl
AC_SUBST(CONFIGURED_WINDRES_FOR_TARGET)dnl
AC_SUBST(FLAGS_FOR_TARGET)
# Fix up target tools.
if test "x${build}" = "x${host}" ; then
# In this case, the newly built tools can and should be used,
# so we override the results of the autoconf tests.
# This should really only happen when the tools are actually being built,
# but that's a further refinement. The new build scheme, where
# tools are built into a structure paralleling where they're installed,
# should also eliminate all of this cleanly.
AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)"
NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
OBJDUMP_FOR_TARGET="\$(USUAL_OBJDUMP_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
else
# Just use the ones we found.
AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)"
NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
OBJDUMP_FOR_TARGET="\$(CONFIGURED_OBJDUMP_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define. From-SVN: r104747
2005-09-29 01:50:06 +02:00
STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
fi
AC_SUBST(RAW_CXX_FOR_TARGET)
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
1997-08-22 00:57:35 +02:00
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
AC_ARG_ENABLE(maintainer-mode,
[ --enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
AC_SUBST(MAINTAINER_MODE_TRUE)
AC_SUBST(MAINTAINER_MODE_FALSE)
if test "$USE_MAINTAINER_MODE" = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
else
MAINTAINER_MODE_TRUE='#'
MAINTAINER_MODE_FALSE=
fi
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
# ---------------------
# GCC bootstrap support
# ---------------------
# Stage specific cflags for build.
stage1_cflags="-g"
case $build in
vax-*-*)
case ${GCC} in
yes) stage1_cflags="-g -Wa,-J" ;;
*) stage1_cflags="-g -J" ;;
esac ;;
powerpc-*-darwin*)
# The spiffy cpp-precomp chokes on some legitimate constructs in GCC
# sources; use -no-cpp-precomp to get to GNU cpp.
# Apple's GCC has bugs in designated initializer handling, so disable
# that too.
stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
;;
esac
AC_SUBST(stage1_cflags)
2004-05-24 13:08:12 +02:00
# It makes debugging easier if we create as symlinks the stage directories
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
2004-05-24 13:08:12 +02:00
# possible, however, we can resort to mv.
AC_CACHE_CHECK([if symbolic links between directories work],
[gcc_cv_prog_ln_s_dir],
[if test "${LN_S}" = "ln -s" \
&& mkdir confdir.s1 \
&& ln -s confdir.s1 confdir.s2 \
&& echo timestamp1 > confdir.s1/conftest.1 \
&& cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
&& echo timestamp2 > confdir.s2/conftest.2 \
&& cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
&& rm -f confdir.s2; then
gcc_cv_prog_ln_s_dir=yes
else
re PR bootstrap/17383 (Building in src dir fails) 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.def (target_modules): Remove "stage", now unnecessary. * Makefile.tpl (HOST_SUBDIR): New substitution. (STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET, USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET, USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET, USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it. (Host modules, Bootstrapped modules): Use it. (Build modules, Target modules): Do not create symlink trees, always configure out-of-srcdir. (distclean): Try removing $(host_subdir) with rm before using rm -rf. * configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET, GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use $(HOST_SUBDIR). Create a symlink for host_subdir. * Makefile.in: Regenerate. * configure: Regenerate. config: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * config/acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src gcc build is going. gcc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * gcc/Makefile.in (host_subdir): New. (build_objdir): New. Replace ../$(build_subdir) with it throughout. * gcc/configure: Regenerate. libada: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.in (GCC_DIR): Add $(HOST_SUBDIR) to the definition. libjava: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (COMPPATH): Removed. (ZIP, GCJH): Replace it with ../$(host_subdir). (built_gcc_dir): Add $(host_subdir). * configure: Regenerate. * Makefile.in, include/Makefile.in, testsuite/Makefile.in, gcj/Makefile.in, external/Makefile.in, external/sax/Makefile.in, external/w3c_dom/Makefile.in: Regenerate. libobjc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (Determine CFLAGS for gthread): Use $host_subdir. * configure: Regenerate. * Makefile.in (host_subdir): New. (INCLUDES): Use it. From-SVN: r95680
2005-02-28 14:26:36 +01:00
gcc_cv_prog_ln_s_dir=no
2004-05-24 13:08:12 +02:00
fi
rm -rf confdir.s1 confdir.s2])
case ${gcc_cv_prog_ln_s_dir} in
yes)
CREATE_LINK_TO_DIR='ln -s $$1 $$2'
UNDO_LINK_TO_DIR='rm -f $$1' ;;
*)
CREATE_LINK_TO_DIR='mv $$1 $$2'
UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
esac
AC_SUBST(CREATE_LINK_TO_DIR)
AC_SUBST(UNDO_LINK_TO_DIR)
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
AC_ARG_ENABLE(werror,
[ --enable-werror enable -Werror in bootstrap stage2 and later], [],
[enable_werror=yes])
case ${enable_werror} in
yes) stage2_werror_flag="--enable-werror-always" ;;
*) stage2_werror_flag="" ;;
esac
AC_SUBST(stage2_werror_flag)
AC_OUTPUT(Makefile)