gcc/boehm-gc/configure.in

dnl Process this file with autoconf to produce configure.

AC_INIT(gc_mark.h)

dnl Can't be done in BOEHM_CONFIGURE because that confuses automake. 
AC_CONFIG_AUX_DIR(..)

AC_CANONICAL_SYSTEM

BOEHM_CONFIGURE(.)

AM_PROG_LIBTOOL

dnl We use these options to decide which functions to include.
AC_ARG_WITH(target-subdir,
[  --with-target-subdir=SUBDIR
                          configuring with a cross compiler])
AC_ARG_WITH(cross-host,
[  --with-cross-host=HOST  configuring with a cross compiler])

AM_MAINTAINER_MODE
# automake wants to see AC_EXEEXT.  But we don't need it.  And having
# it is actually a problem, because the compiler we're passed can't
# necessarily do a full link.  So we fool automake here.
if test "x" = "y"; then
   AC_EXEEXT
fi

AC_MSG_CHECKING([for threads package to use])
AC_ARG_ENABLE(threads, [  --enable-threads=TYPE   choose threading package],
  THREADS=$enableval,
  dnl FIXME: figure out native threads to use here.
  THREADS=no)

if test "$THREADS" = yes; then
   case "$host" in
    *-*-vxworks*)
       THREADS=vxworks
       ;;
    *-*-linux*)
       # FIXME: this isn't correct in all cases.
       THREADS=posix
       ;;
    *-*-win*)
       THREADS=win32
       ;;
    *-*-irix[[1-5]].*)
       # No built-in threads library on IRIX 5.* and older.
       THREADS=none
       ;;
    *-*-irix*)
       # FIXME: for now, choose POSIX, because we implement that.
       # Later, choose irix threads.
       THREADS=posix
       ;;
    *-*-solaris*)
       # FIXME: for now, choose POSIX, because we implement that.
       # Later, choose solaris threads.
       THREADS=posix
       ;;
    *)
       # For now.
       THREADS=none
       ;;
   esac
fi

INCLUDES=
THREADLIBS=
case "$THREADS" in
 no | none | single)
    THREADS=none
    ;;
 posix | pthreads)
    THREADS=posix
    case "$host" in
     *-*-linux*)
	AC_DEFINE(LINUX_THREADS)
	AC_DEFINE(_REENTRANT)
	;;
     *-*-solaris*)
	AC_DEFINE(SOLARIS_THREADS)
	AC_DEFINE(_SOLARIS_PTHREADS)
	;;
     *-*-irix*)
	AC_DEFINE(IRIX_THREADS)
	;;
    esac
    THREADLIBS=-lpthread
    ;;
 decosf1 | irix | mach | os2 | solaris | win32 | dce | vxworks)
    AC_MSG_ERROR(thread package $THREADS not yet supported)
    ;;
 *)
    AC_MSG_ERROR($THREADS is an unknown thread package)
    ;;
esac
AC_MSG_RESULT($THREADS)
AC_SUBST(THREADLIBS)

AC_CHECK_LIB(dl, dlopen, EXTRA_TEST_LIBS="$EXTRA_TEST_LIBS -ldl")
AC_SUBST(EXTRA_TEST_LIBS)

AC_ARG_ENABLE(java-gc,
changequote(<<,>>)dnl
<<  --enable-java-gc=TYPE   choose garbage collector [boehm]>>,
changequote([,])
  GC=$enableval,
  GC=boehm)
target_all=
if test "$GC" = "boehm"; then
   target_all=libgcjgc.la
fi
AC_SUBST(target_all)

dnl If the target is an eCos system, use the appropriate eCos
dnl I/O routines.
dnl FIXME: this should not be a local option but a global target
dnl system; at present there is no eCos target.
TARGET_ECOS="no"
AC_ARG_WITH(ecos,
[  --with-ecos             enable runtime eCos target support],
TARGET_ECOS="$with_ecos"
)

addobjs=
CXXINCLUDES=
case "$TARGET_ECOS" in
   no)
      ;;
   *)
      AC_DEFINE(ECOS)
      CXXINCLUDES="-I${TARGET_ECOS}/include"
      addobjs="$addobjs ecos.lo"
      ;;
esac
AC_SUBST(CXX)

AC_SUBST(INCLUDES)
AC_SUBST(CXXINCLUDES)

machdep=
case "$host" in
# alpha_mach_dep.s assumes that pointers are not saved in fp registers.
# Gcc on a 21264 can spill pointers to fp registers.  Oops.
# alpha*-*-*)
#    machdep="alpha_mach_dep.lo"
#    ;;
 mipstx39-*-elf*)
    machdep="mips_ultrix_mach_dep.lo"
    AC_DEFINE(STACKBASE, __stackbase)
    AC_DEFINE(DATASTART_IS_ETEXT)
    ;;
 mips-dec-ultrix*)
    machdep="mips_ultrix_mach-dep.lo"
    ;;
 mips-*-*)
    machdep="mips_sgi_mach_dep.lo"
    AC_DEFINE(NO_EXECUTE_PERMISSION)
    ;;
 sparc-sun-solaris2.3*)
    AC_DEFINE(SUNOS53_SHARED_LIB)
    ;;
esac
if test x"$machdep" = x; then
   machdep="mach_dep.lo"
fi
addobjs="$addobjs $machdep"
AC_SUBST(addobjs)

dnl As of 4.13a2, the collector will not properly work on Solaris when
dnl built with gcc and -O.  So we remove -O in the appropriate case.
case "$host" in
 sparc-sun-solaris2*)
    if test "$GCC" = yes; then
       new_CFLAGS=
       for i in $CFLAGS; do
	  case "$i" in
	   -O*)
	      ;;
	   *)
	      new_CFLAGS="$new_CFLAGS $i"
	      ;;
	  esac
       done
       CFLAGS="$new_CFLAGS"
    fi
    ;;
esac

dnl We need to override the top-level CFLAGS.  This is how we do it.
MY_CFLAGS="$CFLAGS"
AC_SUBST(MY_CFLAGS)

dnl Define a few things to retarget the library towards
dnl embedded Java.
AC_DEFINE(SILENT)
AC_DEFINE(NO_SIGNALS)
AC_DEFINE(JAVA_FINALIZATION)
AC_DEFINE(GC_GCJ_SUPPORT)

dnl This is something of a hack.  When cross-compiling we turn off
dnl some functionality.  We also enable the "small" configuration.
dnl These is only correct when targetting an embedded system.  FIXME.
if test -n "${with_cross_host}"; then
   AC_DEFINE(NO_SIGSET)
   AC_DEFINE(NO_CLOCK)
   AC_DEFINE(SMALL_CONFIG)
   AC_DEFINE(NO_DEBUGGING)
fi

AM_CONDITIONAL(USE_LIBDIR, test -z "$with_cross_host")

if test "${multilib}" = "yes"; then
  multilib_arg="--enable-multilib"
else
  multilib_arg=
fi

AC_OUTPUT(Makefile,
[
dnl Put all the -D options in a file.  These are required before
dnl boehm-config.h can be included.  This is a huge hack brought
dnl about by overall poor structuring of this entire library.
echo "$DEFS" > boehm-cflags

if test -n "$CONFIG_FILES"; then
  ac_file=Makefile . ${boehm_gc_basedir}/../config-ml.in
fi],
srcdir=${srcdir}
host=${host}
target=${target}
with_multisubdir=${with_multisubdir}
ac_configure_args="${multilib_arg} ${ac_configure_args}"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
boehm_gc_basedir=${boehm_gc_basedir}
CC="${CC}"
DEFS="$DEFS"
)