gcc/boehm-gc/doc/debugging.html

290 lines
14 KiB
HTML
Raw Normal View History

2001-08-17 20:39:15 +02:00
<HTML>
<HEAD>
<TITLE>Debugging Garbage Collector Related Problems</title>
</head>
<BODY>
<H1>Debugging Garbage Collector Related Problems</h1>
This page contains some hints on
debugging issues specific to
the Boehm-Demers-Weiser conservative garbage collector.
It applies both to debugging issues in client code that manifest themselves
as collector misbehavior, and to debugging the collector itself.
<P>
If you suspect a bug in the collector itself, it is strongly recommended
that you try the latest collector release, even if it is labelled as "alpha",
before proceeding.
<H2>Bus Errors and Segmentation Violations</h2>
<P>
If the fault occurred in GC_find_limit, or with incremental collection enabled,
this is probably normal. The collector installs handlers to take care of
these. You will not see these unless you are using a debugger.
Your debugger <I>should</i> allow you to continue.
It's often preferable to tell the debugger to ignore SIGBUS and SIGSEGV
("<TT>handle SIGSEGV SIGBUS nostop noprint</tt>" in gdb,
"<TT>ignore SIGSEGV SIGBUS</tt>" in most versions of dbx)
and set a breakpoint in <TT>abort</tt>.
The collector will call abort if the signal had another cause,
and there was not other handler previously installed.
<P>
We recommend debugging without incremental collection if possible.
(This applies directly to UNIX systems.
Debugging with incremental collection under win32 is worse. See README.win32.)
<P>
If the application generates an unhandled SIGSEGV or equivalent, it may
often be easiest to set the environment variable GC_LOOP_ON_ABORT. On many
platforms, this will cause the collector to loop in a handler when the
SIGSEGV is encountered (or when the collector aborts for some other reason),
and a debugger can then be attached to the looping
process. This sidesteps common operating system problems related
to incomplete core files for multithreaded applications, etc.
<H2>Other Signals</h2>
On most platforms, the multithreaded version of the collector needs one or
two other signals for internal use by the collector in stopping threads.
It is normally wise to tell the debugger to ignore these. On Linux,
the collector currently uses SIGPWR and SIGXCPU by default.
<H2>Warning Messages About Needing to Allocate Blacklisted Blocks</h2>
The garbage collector generates warning messages of the form
<PRE>
Needed to allocate blacklisted block at 0x...
</pre>
when it needs to allocate a block at a location that it knows to be
referenced by a false pointer. These false pointers can be either permanent
(<I>e.g.</i> a static integer variable that never changes) or temporary.
In the latter case, the warning is largely spurious, and the block will
eventually be reclaimed normally.
In the former case, the program will still run correctly, but the block
will never be reclaimed. Unless the block is intended to be
permanent, the warning indicates a memory leak.
<OL>
<LI>Ignore these warnings while you are using GC_DEBUG. Some of the routines
mentioned below don't have debugging equivalents. (Alternatively, write
the missing routines and send them to me.)
<LI>Replace allocator calls that request large blocks with calls to
<TT>GC_malloc_ignore_off_page</tt> or
<TT>GC_malloc_atomic_ignore_off_page</tt>. You may want to set a
breakpoint in <TT>GC_default_warn_proc</tt> to help you identify such calls.
Make sure that a pointer to somewhere near the beginning of the resulting block
is maintained in a (preferably volatile) variable as long as
the block is needed.
<LI>
If the large blocks are allocated with realloc, we suggest instead allocating
them with something like the following. Note that the realloc size increment
should be fairly large (e.g. a factor of 3/2) for this to exhibit reasonable
performance. But we all know we should do that anyway.
<PRE>
void * big_realloc(void *p, size_t new_size)
{
size_t old_size = GC_size(p);
void * result;
if (new_size <= 10000) return(GC_realloc(p, new_size));
if (new_size <= old_size) return(p);
result = GC_malloc_ignore_off_page(new_size);
if (result == 0) return(0);
memcpy(result,p,old_size);
GC_free(p);
return(result);
}
</pre>
<LI> In the unlikely case that even relatively small object
(&lt;20KB) allocations are triggering these warnings, then your address
space contains lots of "bogus pointers", i.e. values that appear to
be pointers but aren't. Usually this can be solved by using GC_malloc_atomic
or the routines in gc_typed.h to allocate large pointer-free regions of bitmaps, etc. Sometimes the problem can be solved with trivial changes of encoding
in certain values. It is possible, to identify the source of the bogus
pointers by building the collector with <TT>-DPRINT_BLACK_LIST</tt>,
which will cause it to print the "bogus pointers", along with their location.
<LI> If you get only a fixed number of these warnings, you are probably only
introducing a bounded leak by ignoring them. If the data structures being
allocated are intended to be permanent, then it is also safe to ignore them.
The warnings can be turned off by calling GC_set_warn_proc with a procedure
that ignores these warnings (e.g. by doing absolutely nothing).
</ol>
<H2>The Collector References a Bad Address in <TT>GC_malloc</tt></h2>
This typically happens while the collector is trying to remove an entry from
its free list, and the free list pointer is bad because the free list link
in the last allocated object was bad.
<P>
With &gt; 99% probability, you wrote past the end of an allocated object.
Try setting <TT>GC_DEBUG</tt> before including <TT>gc.h</tt> and
allocating with <TT>GC_MALLOC</tt>. This will try to detect such
overwrite errors.
<H2>Unexpectedly Large Heap</h2>
Unexpected heap growth can be due to one of the following:
<OL>
<LI> Data structures that are being unintentionally retained. This
is commonly caused by data structures that are no longer being used,
but were not cleared, or by caches growing without bounds.
<LI> Pointer misidentification. The garbage collector is interpreting
integers or other data as pointers and retaining the "referenced"
objects.
<LI> Heap fragmentation. This should never result in unbounded growth,
but it may account for larger heaps. This is most commonly caused
by allocation of large objects. On some platforms it can be reduced
by building with -DUSE_MUNMAP, which will cause the collector to unmap
memory corresponding to pages that have not been recently used.
<LI> Per object overhead. This is usually a relatively minor effect, but
it may be worth considering. If the collector recognizes interior
pointers, object sizes are increased, so that one-past-the-end pointers
are correctly recognized. The collector can be configured not to do this
(<TT>-DDONT_ADD_BYTE_AT_END</tt>).
<P>
The collector rounds up object sizes so the result fits well into the
chunk size (<TT>HBLKSIZE</tt>, normally 4K on 32 bit machines, 8K
on 64 bit machines) used by the collector. Thus it may be worth avoiding
objects of size 2K + 1 (or 2K if a byte is being added at the end.)
</ol>
The last two cases can often be identified by looking at the output
of a call to <TT>GC_dump()</tt>. Among other things, it will print the
list of free heap blocks, and a very brief description of all chunks in
the heap, the object sizes they correspond to, and how many live objects
were found in the chunk at the last collection.
<P>
Growing data structures can usually be identified by
<OL>
<LI> Building the collector with <TT>-DKEEP_BACK_PTRS</tt>,
<LI> Preferably using debugging allocation (defining <TT>GC_DEBUG</tt>
before including <TT>gc.h</tt> and allocating with <TT>GC_MALLOC</tt>),
so that objects will be identified by their allocation site,
<LI> Running the application long enough so
that most of the heap is composed of "leaked" memory, and
<LI> Then calling <TT>GC_generate_random_backtrace()</tt> from backptr.h
a few times to determine why some randomly sampled objects in the heap are
being retained.
</ol>
<P>
The same technique can often be used to identify problems with false
pointers, by noting whether the reference chains printed by
<TT>GC_generate_random_backtrace()</tt> involve any misidentified pointers.
An alternate technique is to build the collector with
<TT>-DPRINT_BLACK_LIST</tt> which will cause it to report values that
are almost, but not quite, look like heap pointers. It is very likely that
actual false pointers will come from similar sources.
<P>
In the unlikely case that false pointers are an issue, it can usually
be resolved using one or more of the following techniques:
<OL>
<LI> Use <TT>GC_malloc_atomic</tt> for objects containing no pointers.
This is especially important for large arrays containing compressed data,
pseudo-random numbers, and the like. It is also likely to improve GC
performance, perhaps drastically so if the application is paging.
<LI> If you allocate large objects containing only
one or two pointers at the beginning, either try the typed allocation
primitives is <TT>gc_typed.h</tt>, or separate out the pointerfree component.
<LI> Consider using <TT>GC_malloc_ignore_off_page()</tt>
to allocate large objects. (See <TT>gc.h</tt> and above for details.
Large means &gt; 100K in most environments.)
</ol>
<H2>Prematurely Reclaimed Objects</h2>
The usual symptom of this is a segmentation fault, or an obviously overwritten
value in a heap object. This should, of course, be impossible. In practice,
it may happen for reasons like the following:
<OL>
<LI> The collector did not intercept the creation of threads correctly in
a multithreaded application, <I>e.g.</i> because the client called
<TT>pthread_create</tt> without including <TT>gc.h</tt>, which redefines it.
<LI> The last pointer to an object in the garbage collected heap was stored
somewhere were the collector couldn't see it, <I>e.g.</i> in an
object allocated with system <TT>malloc</tt>, in certain types of
<TT>mmap</tt>ed files,
or in some data structure visible only to the OS. (On some platforms,
thread-local storage is one of these.)
<LI> The last pointer to an object was somehow disguised, <I>e.g.</i> by
XORing it with another pointer.
<LI> Incorrect use of <TT>GC_malloc_atomic</tt> or typed allocation.
<LI> An incorrect <TT>GC_free</tt> call.
<LI> The client program overwrote an internal garbage collector data structure.
<LI> A garbage collector bug.
<LI> (Empirically less likely than any of the above.) A compiler optimization
that disguised the last pointer.
</ol>
The following relatively simple techniques should be tried first to narrow
down the problem:
<OL>
<LI> If you are using the incremental collector try turning it off for
debugging.
<LI> Try to reproduce the problem with fully debuggable unoptimized code.
This will eliminate the last possibility, as well as making debugging easier.
<LI> Try replacing any suspect typed allocation and <TT>GC_malloc_atomic</tt>
calls with calls to <TT>GC_malloc</tt>.
<LI> Try removing any GC_free calls (<I>e.g.</i> with a suitable
<TT>#define</tt>).
<LI> Rebuild the collector with <TT>-DGC_ASSERTIONS</tt>.
<LI> If the following works on your platform (i.e. if gctest still works
if you do this), try building the collector with
<TT>-DREDIRECT_MALLOC=GC_malloc_uncollectable</tt>. This will cause
the collector to scan memory allocated with malloc.
</ol>
If all else fails, you will have to attack this with a debugger.
Suggested steps:
<OL>
<LI> Call <TT>GC_dump()</tt> from the debugger around the time of the failure. Verify
that the collectors idea of the root set (i.e. static data regions which
it should scan for pointers) looks plausible. If not, i.e. if it doesn't
include some static variables, report this as
a collector bug. Be sure to describe your platform precisely, since this sort
of problem is nearly always very platform dependent.
<LI> Especially if the failure is not deterministic, try to isolate it to
a relatively small test case.
<LI> Set a break point in <TT>GC_finish_collection</tt>. This is a good
point to examine what has been marked, i.e. found reachable, by the
collector.
<LI> If the failure is deterministic, run the process
up to the last collection before the failure.
Note that the variable <TT>GC_gc_no</tt> counts collections and can be used
to set a conditional breakpoint in the right one. It is incremented just
before the call to GC_finish_collection.
If object <TT>p</tt> was prematurely recycled, it may be helpful to
look at <TT>*GC_find_header(p)</tt> at the failure point.
The <TT>hb_last_reclaimed</tt> field will identify the collection number
during which its block was last swept.
<LI> Verify that the offending object still has its correct contents at
this point.
The call <TT>GC_is_marked(p)</tt> from the debugger to verify that the
object has not been marked, and is about to be reclaimed.
<LI> Determine a path from a root, i.e. static variable, stack, or
register variable,
to the reclaimed object. Call <TT>GC_is_marked(q)</tt> for each object
<TT>q</tt> along the path, trying to locate the first unmarked object, say
<TT>r</tt>.
<LI> If <TT>r</tt> is pointed to by a static root,
verify that the location
pointing to it is part of the root set printed by <TT>GC_dump()</tt>. If it
is on the stack in the main (or only) thread, verify that
<TT>GC_stackbottom</tt> is set correctly to the base of the stack. If it is
in another thread stack, check the collector's thread data structure
(<TT>GC_thread[]</tt> on several platforms) to make sure that stack bounds
are set correctly.
<LI> If <TT>r</tt> is pointed to by heap object <TT>s</tt>, check that the
collector's layout description for <TT>s</tt> is such that the pointer field
will be scanned. Call <TT>*GC_find_header(s)</tt> to look at the descriptor
for the heap chunk. The <TT>hb_descr</tt> field specifies the layout
of objects in that chunk. See gc_mark.h for the meaning of the descriptor.
(If it's low order 2 bits are zero, then it is just the length of the
object prefix to be scanned. This form is always used for objects allocated
with <TT>GC_malloc</tt> or <TT>GC_malloc_atomic</tt>.)
<LI> If the failure is not deterministic, you may still be able to apply some
of the above technique at the point of failure. But remember that objects
allocated since the last collection will not have been marked, even if the
collector is functioning properly. On some platforms, the collector
can be configured to save call chains in objects for debugging.
Enabling this feature will also cause it to save the call stack at the
point of the last GC in GC_arrays._last_stack.
<LI> When looking at GC internal data structures remember that a number
of <TT>GC_</tt><I>xxx</i> variables are really macro defined to
<TT>GC_arrays._</tt><I>xxx</i>, so that
the collector can avoid scanning them.
</ol>
</body>
</html>