gcc/libitm/Makefile.in

1121 lines
41 KiB
Makefile
Raw Normal View History

# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
esac; \
test $$am__dry = yes; \
}
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
@ARCH_ARM_TRUE@am__append_1 = hwcap.cc
@ARCH_X86_TRUE@am__append_2 = x86_sse.cc x86_avx.cc
@ARCH_FUTEX_TRUE@am__append_3 = futex.cc
subdir = .
DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
$(srcdir)/libitm.spec.in $(srcdir)/../depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/asmcfi.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/enable.m4 \
$(top_srcdir)/../config/futex.m4 \
$(top_srcdir)/../config/hwcaps.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/mmap.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/stdint.m4 \
$(top_srcdir)/../config/tls.m4 \
$(top_srcdir)/../config/weakref.m4 \
$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = libitm.spec
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" \
"$(DESTDIR)$(toolexeclibdir)"
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
libitm_la_LIBADD =
@ARCH_ARM_TRUE@am__objects_1 = hwcap.lo
@ARCH_X86_TRUE@am__objects_2 = x86_sse.lo x86_avx.lo
@ARCH_FUTEX_TRUE@am__objects_3 = futex.lo
am_libitm_la_OBJECTS = aatree.lo alloc.lo alloc_c.lo alloc_cpp.lo \
barrier.lo beginend.lo clone.lo eh_cpp.lo local.lo query.lo \
retry.lo rwlock.lo useraction.lo util.lo sjlj.lo tls.lo \
method-serial.lo method-gl.lo method-ml.lo $(am__objects_1) \
$(am__objects_2) $(am__objects_3)
libitm_la_OBJECTS = $(am_libitm_la_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(libitm_la_SOURCES)
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
INFO_DEPS = libitm.info
am__TEXINFO_TEX_DIR = $(srcdir)/../gcc/doc/include
DVIS = libitm.dvi
PDFS = libitm.pdf
PSS = libitm.ps
HTMLS = libitm.html
TEXINFOS = libitm.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
HEADERS = $(nodist_toolexeclib_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HWCAP_LDFLAGS = @HWCAP_LDFLAGS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPT_LDFLAGS = @OPT_LDFLAGS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
RANLIB = @RANLIB@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XCFLAGS = @XCFLAGS@
XLDFLAGS = @XLDFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
config_path = @config_path@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
re PR other/79046 (g++ -print-file-name=plugin uses full version number in path) PR other/79046 * configure: Regenerated. config/ * acx.m4 (GCC_BASE_VER): New m4 function. (ACX_TOOL_DIRS): Require GCC_BASE_VER, for --with-gcc-major-version-only use just major number from BASE-VER. gcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. (CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s). (gcc.o): Depend on $(BASEVER). * common.opt (dumpfullversion): New option. * gcc.c (driver_handle_option): Handle OPT_dumpfullversion. * doc/invoke.texi: Document -dumpfullversion. * doc/install.texi: Document --with-gcc-major-version-only. * configure: Regenerated. libatomic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgomp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libssp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. liboffloadmic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libquadmath/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libmpx/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libada/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. lto-plugin/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libitm/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. fixincludes/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libcilkrts/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libcc1/ * configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only use just major number from BASE-VER. * configure: Regenerated. * Makefile.in: Regenerated. libobjc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libstdc++-v3/ * configure.ac: Add GCC_BASE_VER. * fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * po/Makefile.in: Regenerated. * libsupc++/Makefile.in: Regenerated. * testsuite/Makefile.in: Regenerated. * src/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. * include/Makefile.in: Regenerated. * doc/Makefile.in: Regenerated. * python/Makefile.in: Regenerated. * src/c++11/Makefile.in: Regenerated. * src/c++98/Makefile.in: Regenerated. * src/filesystem/Makefile.in: Regenerated. libvtv/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libsanitizer/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * libbacktrace/Makefile.in: Regenerated. * interception/Makefile.in: Regenerated. * asan/Makefile.in: Regenerated. * ubsan/Makefile.in: Regenerated. * configure: Regenerated. * sanitizer_common/Makefile.in: Regenerated. * lsan/Makefile.in: Regenerated. * Makefile.in: Regenerated. * tsan/Makefile.in: Regenerated. libgfortran/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. From-SVN: r244521
2017-01-17 10:38:48 +01:00
get_gcc_base_ver = @get_gcc_base_ver@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
link_itm = @link_itm@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
toolexecdir = @toolexecdir@
toolexeclibdir = @toolexeclibdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I .. -I ../config
SUBDIRS = testsuite
re PR other/79046 (g++ -print-file-name=plugin uses full version number in path) PR other/79046 * configure: Regenerated. config/ * acx.m4 (GCC_BASE_VER): New m4 function. (ACX_TOOL_DIRS): Require GCC_BASE_VER, for --with-gcc-major-version-only use just major number from BASE-VER. gcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. (CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s). (gcc.o): Depend on $(BASEVER). * common.opt (dumpfullversion): New option. * gcc.c (driver_handle_option): Handle OPT_dumpfullversion. * doc/invoke.texi: Document -dumpfullversion. * doc/install.texi: Document --with-gcc-major-version-only. * configure: Regenerated. libatomic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgomp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libssp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. liboffloadmic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libquadmath/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libmpx/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libada/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. lto-plugin/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libitm/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. fixincludes/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libcilkrts/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libcc1/ * configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only use just major number from BASE-VER. * configure: Regenerated. * Makefile.in: Regenerated. libobjc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libstdc++-v3/ * configure.ac: Add GCC_BASE_VER. * fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * po/Makefile.in: Regenerated. * libsupc++/Makefile.in: Regenerated. * testsuite/Makefile.in: Regenerated. * src/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. * include/Makefile.in: Regenerated. * doc/Makefile.in: Regenerated. * python/Makefile.in: Regenerated. * src/c++11/Makefile.in: Regenerated. * src/c++98/Makefile.in: Regenerated. * src/filesystem/Makefile.in: Regenerated. libvtv/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libsanitizer/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * libbacktrace/Makefile.in: Regenerated. * interception/Makefile.in: Regenerated. * asan/Makefile.in: Regenerated. * ubsan/Makefile.in: Regenerated. * configure: Regenerated. * sanitizer_common/Makefile.in: Regenerated. * lsan/Makefile.in: Regenerated. * Makefile.in: Regenerated. * tsan/Makefile.in: Regenerated. libgfortran/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. From-SVN: r244521
2017-01-17 10:38:48 +01:00
gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER)
abi_version = -fabi-version=4
search_path = $(addprefix $(top_srcdir)/config/, $(config_path)) $(top_srcdir)
fincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/finclude
libsubincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include
AM_CPPFLAGS = $(addprefix -I, $(search_path))
AM_CFLAGS = $(XCFLAGS)
AM_CXXFLAGS = $(XCFLAGS) -std=gnu++0x -funwind-tables -fno-exceptions \
-fno-rtti $(abi_version)
AM_CCASFLAGS = $(XCFLAGS)
AM_LDFLAGS = $(XLDFLAGS) $(SECTION_LDFLAGS) $(OPT_LDFLAGS) $(HWCAP_LDFLAGS)
toolexeclib_LTLIBRARIES = libitm.la
nodist_toolexeclib_HEADERS = libitm.spec
@LIBITM_BUILD_VERSIONED_SHLIB_FALSE@libitm_version_script =
@LIBITM_BUILD_VERSIONED_SHLIB_GNU_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_script = -Wl,--version-script,$(top_srcdir)/libitm.map
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_script = -Wl,-M,libitm.map-sun
@LIBITM_BUILD_VERSIONED_SHLIB_FALSE@libitm_version_dep =
@LIBITM_BUILD_VERSIONED_SHLIB_GNU_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_dep = $(top_srcdir)/libitm.map
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_dep = libitm.map-sun
libitm_version_info = -version-info $(libtool_VERSION)
# Force link with C, not C++. For now, while we're using C++ we don't
# want or need libstdc++.
libitm_la_DEPENDENCIES = $(libitm_version_dep)
libitm_la_LINK = $(LINK) $(libitm_la_LDFLAGS)
libitm_la_LDFLAGS = $(libitm_version_info) $(libitm_version_script)
libitm_la_SOURCES = aatree.cc alloc.cc alloc_c.cc alloc_cpp.cc \
barrier.cc beginend.cc clone.cc eh_cpp.cc local.cc query.cc \
retry.cc rwlock.cc useraction.cc util.cc sjlj.S tls.cc \
method-serial.cc method-gl.cc method-ml.cc $(am__append_1) \
$(am__append_2) $(am__append_3)
# Automake Documentation:
# If your package has Texinfo files in many directories, you can use the
# variable TEXINFO_TEX to tell Automake where to find the canonical
# `texinfo.tex' for your package. The value of this variable should be
# the relative path from the current `Makefile.am' to `texinfo.tex'.
TEXINFO_TEX = ../gcc/doc/include/texinfo.tex
# Defines info, dvi, pdf and html targets
MAKEINFOFLAGS = -I $(srcdir)/../gcc/doc/include
info_TEXINFOS = libitm.texi
@GENINSRC_FALSE@STAMP_GENINSRC =
# AM_CONDITIONAL on configure option --generated-files-in-srcdir
@GENINSRC_TRUE@STAMP_GENINSRC = stamp-geninsrc
@BUILD_INFO_FALSE@STAMP_BUILD_INFO =
# AM_CONDITIONAL on configure check ACX_CHECK_PROG_VER([MAKEINFO])
@BUILD_INFO_TRUE@STAMP_BUILD_INFO = stamp-build-info
CLEANFILES = $(STAMP_GENINSRC) $(STAMP_BUILD_INFO) libitm.info
MAINTAINERCLEANFILES = $(srcdir)/libitm.info
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .S .cc .dvi .lo .o .obj .ps
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then rm -f stamp-h1; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
libitm.spec: $(top_builddir)/config.status $(srcdir)/libitm.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
}
uninstall-toolexeclibLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
done
clean-toolexeclibLTLIBRARIES:
-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libitm.la: $(libitm_la_OBJECTS) $(libitm_la_DEPENDENCIES) $(EXTRA_libitm_la_DEPENDENCIES)
$(libitm_la_LINK) -rpath $(toolexeclibdir) $(libitm_la_OBJECTS) $(libitm_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aatree.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc_c.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc_cpp.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/barrier.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/beginend.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clone.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh_cpp.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/futex.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hwcap.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/local.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-gl.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-ml.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-serial.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/query.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/retry.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rwlock.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sjlj.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/useraction.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_avx.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_sse.Plo@am__quote@
.S.o:
@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $<
.S.obj:
@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.S.lo:
@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCCAS_FALSE@ $(LTCPPASCOMPILE) -c -o $@ $<
.cc.o:
@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
.cc.obj:
@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.cc.lo:
@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# GNU Make needs to see an explicit $(MAKE) variable in the command it
# runs to enable its job server during parallel builds. Hence the
# comments below.
all-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
install-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
mostlyclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
libitm.dvi: libitm.texi
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi
libitm.pdf: libitm.texi
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi
libitm.html: libitm.texi
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
else \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf libitm.aux libitm.cp libitm.cps libitm.fn libitm.fns libitm.ky \
libitm.kys libitm.log libitm.pg libitm.pgs libitm.tmp \
libitm.toc libitm.tp libitm.tps libitm.vr libitm.vrs
clean-aminfo:
-test -z "libitm.dvi libitm.pdf libitm.ps libitm.html" \
|| rm -rf libitm.dvi libitm.pdf libitm.ps libitm.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS)
@$(NORMAL_INSTALL)
@list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \
done
uninstall-nodist_toolexeclibHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(toolexeclibdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) all-multi $(HEADERS) \
config.h all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(toolexeclibdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-multi clean-recursive
clean-am: clean-aminfo clean-generic clean-libtool \
clean-toolexeclibLTLIBRARIES mostlyclean-am
distclean: distclean-multi distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am: $(DVIS)
html: html-recursive
html-am: $(HTMLS)
info: info-recursive
info-am: $(INFO_DEPS)
install-data-am: install-info-am
install-dvi: install-dvi-recursive
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am: install-multi install-nodist_toolexeclibHEADERS \
install-toolexeclibLTLIBRARIES
install-html: install-html-recursive
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man:
install-pdf: install-pdf-recursive
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic
mostlyclean: mostlyclean-multi mostlyclean-recursive
mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am: $(PDFS)
ps: ps-recursive
ps-am: $(PSS)
uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-nodist_toolexeclibHEADERS uninstall-pdf-am \
uninstall-ps-am uninstall-toolexeclibLTLIBRARIES
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \
clean-multi ctags-recursive distclean-multi install-am \
install-multi install-strip maintainer-clean-multi \
mostlyclean-multi tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am all-local all-multi am--refresh check check-am \
clean clean-aminfo clean-generic clean-libtool clean-multi \
clean-toolexeclibLTLIBRARIES ctags ctags-recursive dist-info \
distclean distclean-compile distclean-generic distclean-hdr \
distclean-libtool distclean-multi distclean-tags dvi dvi-am \
html html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-multi \
install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \
install-ps install-ps-am install-strip \
install-toolexeclibLTLIBRARIES installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-aminfo maintainer-clean-generic \
maintainer-clean-multi mostlyclean mostlyclean-aminfo \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
mostlyclean-multi pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
uninstall-info-am uninstall-nodist_toolexeclibHEADERS \
uninstall-pdf-am uninstall-ps-am \
uninstall-toolexeclibLTLIBRARIES
vpath % $(strip $(search_path))
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm.map-sun : $(top_srcdir)/libitm.map \
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ $(top_srcdir)/../contrib/make_sunver.pl \
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ $(libitm_la_OBJECTS) $(libitm_la_LIBADD)
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ perl $(top_srcdir)/../contrib/make_sunver.pl \
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ $(top_srcdir)/libitm.map \
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ $(libitm_la_OBJECTS:%.lo=.libs/%.o) \
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ `echo $(libitm_la_LIBADD) | \
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
@LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@ > $@ || (rm -f $@ ; exit 1)
# Make sure -msse is appended at the end.
@ARCH_X86_TRUE@x86_sse.lo : override CXXFLAGS += -msse
# Make sure -mavx is appended at the end.
@ARCH_X86_AVX_TRUE@x86_avx.lo : override CXXFLAGS += -mavx
all-local: $(STAMP_GENINSRC)
stamp-geninsrc: libitm.info
cp -p $(top_builddir)/libitm.info $(srcdir)/libitm.info
@touch $@
libitm.info: $(STAMP_BUILD_INFO)
stamp-build-info: libitm.texi
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -o libitm.info $(srcdir)/libitm.texi
@touch $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: