OpenE2K/gcc
2
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
d413e3cc11
gcc/boehm-gc/pthread_support.c

1571 lines
46 KiB
C
Raw Normal View History

Initial revision From-SVN: r69872
2003-07-28 05:46:07 +02:00
/*
* Copyright (c) 1994 by Xerox Corporation. All rights reserved.
* Copyright (c) 1996 by Silicon Graphics. All rights reserved.
* Copyright (c) 1998 by Fergus Henderson. All rights reserved.
* Copyright (c) 2000-2001 by Hewlett-Packard Company. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/*
* Support code for LinuxThreads, the clone()-based kernel
* thread package for Linux which is included in libc6.
*
* This code relies on implementation details of LinuxThreads,
* (i.e. properties not guaranteed by the Pthread standard),
* though this version now does less of that than the other Pthreads
* support code.
*
* Note that there is a lot of code duplication between linux_threads.c
* and thread support for some of the other Posix platforms; any changes
* made here may need to be reflected there too.
*/
/* DG/UX ix86 support <takis@xfree86.org> */
/*
* Linux_threads.c now also includes some code to support HPUX and
* OSF1 (Compaq Tru64 Unix, really). The OSF1 support is based on Eric Benson's
* patch.
*
* Eric also suggested an alternate basis for a lock implementation in
* his code:
* + #elif defined(OSF1)
* + unsigned long GC_allocate_lock = 0;
* + msemaphore GC_allocate_semaphore;
* + # define GC_TRY_LOCK() \
* + ((msem_lock(&GC_allocate_semaphore, MSEM_IF_NOWAIT) == 0) \
* + ? (GC_allocate_lock = 1) \
* + : 0)
* + # define GC_LOCK_TAKEN GC_allocate_lock
*/
/*#define DEBUG_THREADS 1*/
/*#define GC_ASSERTIONS*/
# include "private/pthread_support.h"
# if defined(GC_PTHREADS) && !defined(GC_SOLARIS_THREADS) \
&& !defined(GC_IRIX_THREADS) && !defined(GC_WIN32_THREADS) \
&& !defined(GC_AIX_THREADS)
# if defined(GC_HPUX_THREADS) && !defined(USE_PTHREAD_SPECIFIC) \
&& !defined(USE_HPUX_TLS)
# define USE_HPUX_TLS
# endif
# if (defined(GC_DGUX386_THREADS) || defined(GC_OSF1_THREADS) || \
defined(GC_DARWIN_THREADS)) && !defined(USE_PTHREAD_SPECIFIC)
# define USE_PTHREAD_SPECIFIC
# endif
# if defined(GC_DGUX386_THREADS) && !defined(_POSIX4A_DRAFT10_SOURCE)
# define _POSIX4A_DRAFT10_SOURCE 1
# endif
# if defined(GC_DGUX386_THREADS) && !defined(_USING_POSIX4A_DRAFT10)
# define _USING_POSIX4A_DRAFT10 1
# endif
# ifdef THREAD_LOCAL_ALLOC
# if !defined(USE_PTHREAD_SPECIFIC) && !defined(USE_HPUX_TLS)
# include "private/specific.h"
# endif
# if defined(USE_PTHREAD_SPECIFIC)
# define GC_getspecific pthread_getspecific
# define GC_setspecific pthread_setspecific
# define GC_key_create pthread_key_create
typedef pthread_key_t GC_key_t;
# endif
# if defined(USE_HPUX_TLS)
# define GC_getspecific(x) (x)
# define GC_setspecific(key, v) ((key) = (v), 0)
# define GC_key_create(key, d) 0
typedef void * GC_key_t;
# endif
# endif
# include <stdlib.h>
# include <pthread.h>
# include <sched.h>
# include <time.h>
# include <errno.h>
# include <unistd.h>
# include <sys/mman.h>
# include <sys/time.h>
# include <sys/types.h>
# include <sys/stat.h>
# include <fcntl.h>
#if defined(GC_DARWIN_THREADS)
# include "private/darwin_semaphore.h"
#else
# include <semaphore.h>
#endif /* !GC_DARWIN_THREADS */
#if defined(GC_DARWIN_THREADS)
# include <sys/sysctl.h>
#endif /* GC_DARWIN_THREADS */
#if defined(GC_DGUX386_THREADS)
# include <sys/dg_sys_info.h>
# include <sys/_int_psem.h>
/* sem_t is an uint in DG/UX */
typedef unsigned int sem_t;
#endif /* GC_DGUX386_THREADS */
#ifndef __GNUC__
# define __inline__
#endif
#ifdef GC_USE_LD_WRAP
# define WRAP_FUNC(f) __wrap_##f
# define REAL_FUNC(f) __real_##f
#else
# define WRAP_FUNC(f) GC_##f
# if !defined(GC_DGUX386_THREADS)
# define REAL_FUNC(f) f
# else /* GC_DGUX386_THREADS */
# define REAL_FUNC(f) __d10_##f
# endif /* GC_DGUX386_THREADS */
# undef pthread_create
# if !defined(GC_DARWIN_THREADS)
# undef pthread_sigmask
# endif
# undef pthread_join
# undef pthread_detach
# if defined(GC_OSF1_THREADS) && defined(_PTHREAD_USE_MANGLED_NAMES_) \
&& !defined(_PTHREAD_USE_PTDNAM_)
/* Restore the original mangled names on Tru64 UNIX. */
# define pthread_create __pthread_create
# define pthread_join __pthread_join
# define pthread_detach __pthread_detach
# endif
#endif
void GC_thr_init();
static GC_bool parallel_initialized = FALSE;
void GC_init_parallel();
# if defined(THREAD_LOCAL_ALLOC) && !defined(DBG_HDRS_ALL)
/* We don't really support thread-local allocation with DBG_HDRS_ALL */
#ifdef USE_HPUX_TLS
__thread
#endif
GC_key_t GC_thread_key;
static GC_bool keys_initialized;
/* Recover the contents of the freelist array fl into the global one gfl.*/
/* Note that the indexing scheme differs, in that gfl has finer size */
/* resolution, even if not all entries are used. */
/* We hold the allocator lock. */
static void return_freelists(ptr_t *fl, ptr_t *gfl)
{
int i;
ptr_t q, *qptr;
size_t nwords;
for (i = 1; i < NFREELISTS; ++i) {
nwords = i * (GRANULARITY/sizeof(word));
qptr = fl + i;
q = *qptr;
if ((word)q >= HBLKSIZE) {
if (gfl[nwords] == 0) {
gfl[nwords] = q;
} else {
/* Concatenate: */
for (; (word)q >= HBLKSIZE; qptr = &(obj_link(q)), q = *qptr);
GC_ASSERT(0 == q);
*qptr = gfl[nwords];
gfl[nwords] = fl[i];
}
}
/* Clear fl[i], since the thread structure may hang around. */
/* Do it in a way that is likely to trap if we access it. */
fl[i] = (ptr_t)HBLKSIZE;
}
}
/* We statically allocate a single "size 0" object. It is linked to */
/* itself, and is thus repeatedly reused for all size 0 allocation */
/* requests. (Size 0 gcj allocation requests are incorrect, and */
/* we arrange for those to fault asap.) */
static ptr_t size_zero_object = (ptr_t)(&size_zero_object);
/* Each thread structure must be initialized. */
/* This call must be made from the new thread. */
/* Caller holds allocation lock. */
void GC_init_thread_local(GC_thread p)
{
int i;
if (!keys_initialized) {
if (0 != GC_key_create(&GC_thread_key, 0)) {
ABORT("Failed to create key for local allocator");
}
keys_initialized = TRUE;
}
if (0 != GC_setspecific(GC_thread_key, p)) {
ABORT("Failed to set thread specific allocation pointers");
}
for (i = 1; i < NFREELISTS; ++i) {
p -> ptrfree_freelists[i] = (ptr_t)1;
p -> normal_freelists[i] = (ptr_t)1;
# ifdef GC_GCJ_SUPPORT
p -> gcj_freelists[i] = (ptr_t)1;
# endif
}
/* Set up the size 0 free lists. */
p -> ptrfree_freelists[0] = (ptr_t)(&size_zero_object);
p -> normal_freelists[0] = (ptr_t)(&size_zero_object);
# ifdef GC_GCJ_SUPPORT
p -> gcj_freelists[0] = (ptr_t)(-1);
# endif
}
#ifdef GC_GCJ_SUPPORT
extern ptr_t * GC_gcjobjfreelist;
#endif
/* We hold the allocator lock. */
void GC_destroy_thread_local(GC_thread p)
{
/* We currently only do this from the thread itself or from */
/* the fork handler for a child process. */
# ifndef HANDLE_FORK
GC_ASSERT(GC_getspecific(GC_thread_key) == (void *)p);
# endif
return_freelists(p -> ptrfree_freelists, GC_aobjfreelist);
return_freelists(p -> normal_freelists, GC_objfreelist);
# ifdef GC_GCJ_SUPPORT
return_freelists(p -> gcj_freelists, GC_gcjobjfreelist);
# endif
}
extern GC_PTR GC_generic_malloc_many();
GC_PTR GC_local_malloc(size_t bytes)
{
if (EXPECT(!SMALL_ENOUGH(bytes),0)) {
return(GC_malloc(bytes));
} else {
int index = INDEX_FROM_BYTES(bytes);
ptr_t * my_fl;
ptr_t my_entry;
# if defined(REDIRECT_MALLOC) && !defined(USE_PTHREAD_SPECIFIC)
GC_key_t k = GC_thread_key;
# endif
void * tsd;
# if defined(REDIRECT_MALLOC) && !defined(USE_PTHREAD_SPECIFIC)
if (EXPECT(0 == k, 0)) {
/* This can happen if we get called when the world is */
/* being initialized. Whether we can actually complete */
/* the initialization then is unclear. */
GC_init_parallel();
k = GC_thread_key;
}
# endif
tsd = GC_getspecific(GC_thread_key);
# ifdef GC_ASSERTIONS
LOCK();
GC_ASSERT(tsd == (void *)GC_lookup_thread(pthread_self()));
UNLOCK();
# endif
my_fl = ((GC_thread)tsd) -> normal_freelists + index;
my_entry = *my_fl;
if (EXPECT((word)my_entry >= HBLKSIZE, 1)) {
ptr_t next = obj_link(my_entry);
GC_PTR result = (GC_PTR)my_entry;
*my_fl = next;
obj_link(my_entry) = 0;
PREFETCH_FOR_WRITE(next);
return result;
} else if ((word)my_entry - 1 < DIRECT_GRANULES) {
*my_fl = my_entry + index + 1;
return GC_malloc(bytes);
} else {
GC_generic_malloc_many(BYTES_FROM_INDEX(index), NORMAL, my_fl);
if (*my_fl == 0) return GC_oom_fn(bytes);
return GC_local_malloc(bytes);
}
}
}
GC_PTR GC_local_malloc_atomic(size_t bytes)
{
if (EXPECT(!SMALL_ENOUGH(bytes), 0)) {
return(GC_malloc_atomic(bytes));
} else {
int index = INDEX_FROM_BYTES(bytes);
ptr_t * my_fl = ((GC_thread)GC_getspecific(GC_thread_key))
-> ptrfree_freelists + index;
ptr_t my_entry = *my_fl;
if (EXPECT((word)my_entry >= HBLKSIZE, 1)) {
GC_PTR result = (GC_PTR)my_entry;
*my_fl = obj_link(my_entry);
return result;
} else if ((word)my_entry - 1 < DIRECT_GRANULES) {
*my_fl = my_entry + index + 1;
return GC_malloc_atomic(bytes);
} else {
GC_generic_malloc_many(BYTES_FROM_INDEX(index), PTRFREE, my_fl);
/* *my_fl is updated while the collector is excluded; */
/* the free list is always visible to the collector as */
/* such. */
if (*my_fl == 0) return GC_oom_fn(bytes);
return GC_local_malloc_atomic(bytes);
}
}
}
#ifdef GC_GCJ_SUPPORT
#include "include/gc_gcj.h"
#ifdef GC_ASSERTIONS
extern GC_bool GC_gcj_malloc_initialized;
#endif
extern int GC_gcj_kind;
GC_PTR GC_local_gcj_malloc(size_t bytes,
void * ptr_to_struct_containing_descr)
{
GC_ASSERT(GC_gcj_malloc_initialized);
if (EXPECT(!SMALL_ENOUGH(bytes), 0)) {
return GC_gcj_malloc(bytes, ptr_to_struct_containing_descr);
} else {
int index = INDEX_FROM_BYTES(bytes);
ptr_t * my_fl = ((GC_thread)GC_getspecific(GC_thread_key))
-> gcj_freelists + index;
ptr_t my_entry = *my_fl;
if (EXPECT((word)my_entry >= HBLKSIZE, 1)) {
GC_PTR result = (GC_PTR)my_entry;
GC_ASSERT(!GC_incremental);
/* We assert that any concurrent marker will stop us. */
/* Thus it is impossible for a mark procedure to see the */
/* allocation of the next object, but to see this object */
/* still containing a free list pointer. Otherwise the */
/* marker might find a random "mark descriptor". */
*(volatile ptr_t *)my_fl = obj_link(my_entry);
/* We must update the freelist before we store the pointer. */
/* Otherwise a GC at this point would see a corrupted */
/* free list. */
/* A memory barrier is probably never needed, since the */
/* action of stopping this thread will cause prior writes */
/* to complete. */
GC_ASSERT(((void * volatile *)result)[1] == 0);
*(void * volatile *)result = ptr_to_struct_containing_descr;
return result;
} else if ((word)my_entry - 1 < DIRECT_GRANULES) {
if (!GC_incremental) *my_fl = my_entry + index + 1;
/* In the incremental case, we always have to take this */
/* path. Thus we leave the counter alone. */
return GC_gcj_malloc(bytes, ptr_to_struct_containing_descr);
} else {
GC_generic_malloc_many(BYTES_FROM_INDEX(index), GC_gcj_kind, my_fl);
if (*my_fl == 0) return GC_oom_fn(bytes);
return GC_local_gcj_malloc(bytes, ptr_to_struct_containing_descr);
}
}
}
#endif /* GC_GCJ_SUPPORT */
# else /* !THREAD_LOCAL_ALLOC && !DBG_HDRS_ALL */
# define GC_destroy_thread_local(t)
# endif /* !THREAD_LOCAL_ALLOC */
#if 0
/*
To make sure that we're using LinuxThreads and not some other thread
package, we generate a dummy reference to `pthread_kill_other_threads_np'
(was `__pthread_initial_thread_bos' but that disappeared),
which is a symbol defined in LinuxThreads, but (hopefully) not in other
thread packages.
We no longer do this, since this code is now portable enough that it might
actually work for something else.
*/
void (*dummy_var_to_force_linux_threads)() = pthread_kill_other_threads_np;
#endif /* 0 */
long GC_nprocs = 1; /* Number of processors. We may not have */
/* access to all of them, but this is as good */
/* a guess as any ... */
#ifdef PARALLEL_MARK
# ifndef MAX_MARKERS
# define MAX_MARKERS 16
# endif
static ptr_t marker_sp[MAX_MARKERS] = {0};
void * GC_mark_thread(void * id)
{
word my_mark_no = 0;
marker_sp[(word)id] = GC_approx_sp();
for (;; ++my_mark_no) {
/* GC_mark_no is passed only to allow GC_help_marker to terminate */
/* promptly. This is important if it were called from the signal */
/* handler or from the GC lock acquisition code. Under Linux, it's */
/* not safe to call it from a signal handler, since it uses mutexes */
/* and condition variables. Since it is called only here, the */
/* argument is unnecessary. */
if (my_mark_no < GC_mark_no || my_mark_no > GC_mark_no + 2) {
/* resynchronize if we get far off, e.g. because GC_mark_no */
/* wrapped. */
my_mark_no = GC_mark_no;
}
# ifdef DEBUG_THREADS
GC_printf1("Starting mark helper for mark number %ld\n", my_mark_no);
# endif
GC_help_marker(my_mark_no);
}
}
extern long GC_markers; /* Number of mark threads we would */
/* like to have. Includes the */
/* initiating thread. */
pthread_t GC_mark_threads[MAX_MARKERS];
#define PTHREAD_CREATE REAL_FUNC(pthread_create)
static void start_mark_threads()
{
unsigned i;
pthread_attr_t attr;
if (GC_markers > MAX_MARKERS) {
WARN("Limiting number of mark threads\n", 0);
GC_markers = MAX_MARKERS;
}
if (0 != pthread_attr_init(&attr)) ABORT("pthread_attr_init failed");
if (0 != pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED))
ABORT("pthread_attr_setdetachstate failed");
# if defined(HPUX) || defined(GC_DGUX386_THREADS)
/* Default stack size is usually too small: fix it. */
/* Otherwise marker threads or GC may run out of */
/* space. */
# define MIN_STACK_SIZE (8*HBLKSIZE*sizeof(word))
{
size_t old_size;
int code;
if (pthread_attr_getstacksize(&attr, &old_size) != 0)
ABORT("pthread_attr_getstacksize failed\n");
if (old_size < MIN_STACK_SIZE) {
if (pthread_attr_setstacksize(&attr, MIN_STACK_SIZE) != 0)
ABORT("pthread_attr_setstacksize failed\n");
}
}
# endif /* HPUX || GC_DGUX386_THREADS */
# ifdef CONDPRINT
if (GC_print_stats) {
GC_printf1("Starting %ld marker threads\n", GC_markers - 1);
}
# endif
for (i = 0; i < GC_markers - 1; ++i) {
if (0 != PTHREAD_CREATE(GC_mark_threads + i, &attr,
GC_mark_thread, (void *)(word)i)) {
WARN("Marker thread creation failed, errno = %ld.\n", errno);
}
}
}
#else /* !PARALLEL_MARK */
static __inline__ void start_mark_threads()
{
}
#endif /* !PARALLEL_MARK */
/* Defining INSTALL_LOOPING_SEGV_HANDLER causes SIGSEGV and SIGBUS to */
/* result in an infinite loop in a signal handler. This can be very */
/* useful for debugging, since (as of RH7) gdb still seems to have */
/* serious problems with threads. */
#ifdef INSTALL_LOOPING_SEGV_HANDLER
void GC_looping_handler(int sig)
{
GC_printf3("Signal %ld in thread %lx, pid %ld\n",
sig, pthread_self(), getpid());
for (;;);
}
#endif
GC_bool GC_thr_initialized = FALSE;
volatile GC_thread GC_threads[THREAD_TABLE_SZ];
void GC_push_thread_structures GC_PROTO((void))
{
GC_push_all((ptr_t)(GC_threads), (ptr_t)(GC_threads)+sizeof(GC_threads));
# if defined(THREAD_LOCAL_ALLOC) && !defined(DBG_HDRS_ALL)
GC_push_all((ptr_t)(&GC_thread_key),
(ptr_t)(&GC_thread_key)+sizeof(&GC_thread_key));
# endif
}
#ifdef THREAD_LOCAL_ALLOC
/* We must explicitly mark ptrfree and gcj free lists, since the free */
/* list links wouldn't otherwise be found. We also set them in the */
/* normal free lists, since that involves touching less memory than if */
/* we scanned them normally. */
void GC_mark_thread_local_free_lists(void)
{
int i, j;
GC_thread p;
ptr_t q;
for (i = 0; i < THREAD_TABLE_SZ; ++i) {
for (p = GC_threads[i]; 0 != p; p = p -> next) {
for (j = 1; j < NFREELISTS; ++j) {
q = p -> ptrfree_freelists[j];
if ((word)q > HBLKSIZE) GC_set_fl_marks(q);
q = p -> normal_freelists[j];
if ((word)q > HBLKSIZE) GC_set_fl_marks(q);
# ifdef GC_GCJ_SUPPORT
q = p -> gcj_freelists[j];
if ((word)q > HBLKSIZE) GC_set_fl_marks(q);
# endif /* GC_GCJ_SUPPORT */
}
}
}
}
#endif /* THREAD_LOCAL_ALLOC */
static struct GC_Thread_Rep first_thread;
/* Add a thread to GC_threads. We assume it wasn't already there. */
/* Caller holds allocation lock. */
GC_thread GC_new_thread(pthread_t id)
{
int hv = ((word)id) % THREAD_TABLE_SZ;
GC_thread result;
static GC_bool first_thread_used = FALSE;
if (!first_thread_used) {
result = &first_thread;
first_thread_used = TRUE;
} else {
result = (struct GC_Thread_Rep *)
GC_INTERNAL_MALLOC(sizeof(struct GC_Thread_Rep), NORMAL);
}
if (result == 0) return(0);
result -> id = id;
result -> next = GC_threads[hv];
GC_threads[hv] = result;
GC_ASSERT(result -> flags == 0 && result -> thread_blocked == 0);
return(result);
}
/* Delete a thread from GC_threads. We assume it is there. */
/* (The code intentionally traps if it wasn't.) */
/* Caller holds allocation lock. */
void GC_delete_thread(pthread_t id)
{
int hv = ((word)id) % THREAD_TABLE_SZ;
register GC_thread p = GC_threads[hv];
register GC_thread prev = 0;
while (!pthread_equal(p -> id, id)) {
prev = p;
p = p -> next;
}
if (prev == 0) {
GC_threads[hv] = p -> next;
} else {
prev -> next = p -> next;
}
GC_INTERNAL_FREE(p);
}
/* If a thread has been joined, but we have not yet */
/* been notified, then there may be more than one thread */
/* in the table with the same pthread id. */
/* This is OK, but we need a way to delete a specific one. */
void GC_delete_gc_thread(pthread_t id, GC_thread gc_id)
{
int hv = ((word)id) % THREAD_TABLE_SZ;
register GC_thread p = GC_threads[hv];
register GC_thread prev = 0;
while (p != gc_id) {
prev = p;
p = p -> next;
}
if (prev == 0) {
GC_threads[hv] = p -> next;
} else {
prev -> next = p -> next;
}
GC_INTERNAL_FREE(p);
}
/* Return a GC_thread corresponding to a given thread_t. */
/* Returns 0 if it's not there. */
/* Caller holds allocation lock or otherwise inhibits */
/* updates. */
/* If there is more than one thread with the given id we */
/* return the most recent one. */
GC_thread GC_lookup_thread(pthread_t id)
{
int hv = ((word)id) % THREAD_TABLE_SZ;
register GC_thread p = GC_threads[hv];
while (p != 0 && !pthread_equal(p -> id, id)) p = p -> next;
return(p);
}
#ifdef HANDLE_FORK
/* Remove all entries from the GC_threads table, except the */
/* one for the current thread. We need to do this in the child */
/* process after a fork(), since only the current thread */
/* survives in the child. */
void GC_remove_all_threads_but_me(void)
{
pthread_t self = pthread_self();
int hv;
GC_thread p, next, me;
for (hv = 0; hv < THREAD_TABLE_SZ; ++hv) {
me = 0;
for (p = GC_threads[hv]; 0 != p; p = next) {
next = p -> next;
if (p -> id == self) {
me = p;
p -> next = 0;
} else {
# ifdef THREAD_LOCAL_ALLOC
if (!(p -> flags & FINISHED)) {
GC_destroy_thread_local(p);
}
# endif /* THREAD_LOCAL_ALLOC */
if (p != &first_thread) GC_INTERNAL_FREE(p);
}
}
GC_threads[hv] = me;
}
}
#endif /* HANDLE_FORK */
#ifdef USE_PROC_FOR_LIBRARIES
int GC_segment_is_thread_stack(ptr_t lo, ptr_t hi)
{
int i;
GC_thread p;
# ifdef PARALLEL_MARK
for (i = 0; i < GC_markers; ++i) {
if (marker_sp[i] > lo & marker_sp[i] < hi) return 1;
}
# endif
for (i = 0; i < THREAD_TABLE_SZ; i++) {
for (p = GC_threads[i]; p != 0; p = p -> next) {
if (0 != p -> stack_end) {
# ifdef STACK_GROWS_UP
if (p -> stack_end >= lo && p -> stack_end < hi) return 1;
# else /* STACK_GROWS_DOWN */
if (p -> stack_end > lo && p -> stack_end <= hi) return 1;
# endif
}
}
}
return 0;
}
#endif /* USE_PROC_FOR_LIBRARIES */
#ifdef GC_LINUX_THREADS
/* Return the number of processors, or i<= 0 if it can't be determined. */
int GC_get_nprocs()
{
/* Should be "return sysconf(_SC_NPROCESSORS_ONLN);" but that */
/* appears to be buggy in many cases. */
/* We look for lines "cpu<n>" in /proc/stat. */
# define STAT_BUF_SIZE 4096
# define STAT_READ read
/* If read is wrapped, this may need to be redefined to call */
/* the real one. */
char stat_buf[STAT_BUF_SIZE];
int f;
word result = 1;
/* Some old kernels only have a single "cpu nnnn ..." */
/* entry in /proc/stat. We identify those as */
/* uniprocessors. */
size_t i, len = 0;
f = open("/proc/stat", O_RDONLY);
if (f < 0 || (len = STAT_READ(f, stat_buf, STAT_BUF_SIZE)) < 100) {
WARN("Couldn't read /proc/stat\n", 0);
return -1;
}
for (i = 0; i < len - 100; ++i) {
if (stat_buf[i] == '\n' && stat_buf[i+1] == 'c'
&& stat_buf[i+2] == 'p' && stat_buf[i+3] == 'u') {
int cpu_no = atoi(stat_buf + i + 4);
if (cpu_no >= result) result = cpu_no + 1;
}
}
close(f);
return result;
}
#endif /* GC_LINUX_THREADS */
/* We hold the GC lock. Wait until an in-progress GC has finished. */
/* Repeatedly RELEASES GC LOCK in order to wait. */
/* If wait_for_all is true, then we exit with the GC lock held and no */
/* collection in progress; otherwise we just wait for the current GC */
/* to finish. */
extern GC_bool GC_collection_in_progress();
void GC_wait_for_gc_completion(GC_bool wait_for_all)
{
if (GC_incremental && GC_collection_in_progress()) {
int old_gc_no = GC_gc_no;
/* Make sure that no part of our stack is still on the mark stack, */
/* since it's about to be unmapped. */
while (GC_incremental && GC_collection_in_progress()
&& (wait_for_all || old_gc_no == GC_gc_no)) {
ENTER_GC();
GC_collect_a_little_inner(1);
EXIT_GC();
UNLOCK();
sched_yield();
LOCK();
}
}
}
#ifdef HANDLE_FORK
/* Procedures called before and after a fork. The goal here is to make */
/* it safe to call GC_malloc() in a forked child. It's unclear that is */
/* attainable, since the single UNIX spec seems to imply that one */
/* should only call async-signal-safe functions, and we probably can't */
/* quite guarantee that. But we give it our best shot. (That same */
/* spec also implies that it's not safe to call the system malloc */
/* between fork() and exec(). Thus we're doing no worse than it. */
/* Called before a fork() */
void GC_fork_prepare_proc(void)
{
/* Acquire all relevant locks, so that after releasing the locks */
/* the child will see a consistent state in which monitor */
/* invariants hold. Unfortunately, we can't acquire libc locks */
/* we might need, and there seems to be no guarantee that libc */
/* must install a suitable fork handler. */
/* Wait for an ongoing GC to finish, since we can't finish it in */
/* the (one remaining thread in) the child. */
LOCK();
# if defined(PARALLEL_MARK) || defined(THREAD_LOCAL_ALLOC)
GC_wait_for_reclaim();
# endif
GC_wait_for_gc_completion(TRUE);
# if defined(PARALLEL_MARK) || defined(THREAD_LOCAL_ALLOC)
GC_acquire_mark_lock();
# endif
}
/* Called in parent after a fork() */
void GC_fork_parent_proc(void)
{
# if defined(PARALLEL_MARK) || defined(THREAD_LOCAL_ALLOC)
GC_release_mark_lock();
# endif
UNLOCK();
}
/* Called in child after a fork() */
void GC_fork_child_proc(void)
{
/* Clean up the thread table, so that just our thread is left. */
# if defined(PARALLEL_MARK) || defined(THREAD_LOCAL_ALLOC)
GC_release_mark_lock();
# endif
GC_remove_all_threads_but_me();
# ifdef PARALLEL_MARK
/* Turn off parallel marking in the child, since we are probably */
/* just going to exec, and we would have to restart mark threads. */
GC_markers = 1;
GC_parallel = FALSE;
# endif /* PARALLEL_MARK */
UNLOCK();
}
#endif /* HANDLE_FORK */
#if defined(GC_DGUX386_THREADS)
/* Return the number of processors, or i<= 0 if it can't be determined. */
int GC_get_nprocs()
{
/* <takis@XFree86.Org> */
int numCpus;
struct dg_sys_info_pm_info pm_sysinfo;
int status =0;
status = dg_sys_info((long int *) &pm_sysinfo,
DG_SYS_INFO_PM_INFO_TYPE, DG_SYS_INFO_PM_CURRENT_VERSION);
if (status < 0)
/* set -1 for error */
numCpus = -1;
else
/* Active CPUs */
numCpus = pm_sysinfo.idle_vp_count;
# ifdef DEBUG_THREADS
GC_printf1("Number of active CPUs in this system: %d\n", numCpus);
# endif
return(numCpus);
}
#endif /* GC_DGUX386_THREADS */
/* We hold the allocation lock. */
void GC_thr_init()
{
# ifndef GC_DARWIN_THREADS
int dummy;
# endif
GC_thread t;
if (GC_thr_initialized) return;
GC_thr_initialized = TRUE;
# ifdef HANDLE_FORK
/* Prepare for a possible fork. */
pthread_atfork(GC_fork_prepare_proc, GC_fork_parent_proc,
GC_fork_child_proc);
# endif /* HANDLE_FORK */
/* Add the initial thread, so we can stop it. */
t = GC_new_thread(pthread_self());
# ifdef GC_DARWIN_THREADS
t -> stop_info.mach_thread = mach_thread_self();
# else
t -> stop_info.stack_ptr = (ptr_t)(&dummy);
# endif
t -> flags = DETACHED | MAIN_THREAD;
GC_stop_init();
/* Set GC_nprocs. */
{
char * nprocs_string = GETENV("GC_NPROCS");
GC_nprocs = -1;
if (nprocs_string != NULL) GC_nprocs = atoi(nprocs_string);
}
if (GC_nprocs <= 0) {
# if defined(GC_HPUX_THREADS)
GC_nprocs = pthread_num_processors_np();
# endif
# if defined(GC_OSF1_THREADS)
GC_nprocs = sysconf(_SC_NPROCESSORS_ONLN);
if (GC_nprocs <= 0) GC_nprocs = 1;
# endif
# if defined(GC_FREEBSD_THREADS)
GC_nprocs = 1;
# endif
# if defined(GC_DARWIN_THREADS)
int ncpus = 1;
size_t len = sizeof(ncpus);
sysctl((int[2]) {CTL_HW, HW_NCPU}, 2, &ncpus, &len, NULL, 0);
GC_nprocs = ncpus;
# endif
# if defined(GC_LINUX_THREADS) || defined(GC_DGUX386_THREADS)
GC_nprocs = GC_get_nprocs();
# endif
}
if (GC_nprocs <= 0) {
WARN("GC_get_nprocs() returned %ld\n", GC_nprocs);
GC_nprocs = 2;
# ifdef PARALLEL_MARK
GC_markers = 1;
# endif
} else {
# ifdef PARALLEL_MARK
{
char * markers_string = GETENV("GC_MARKERS");
if (markers_string != NULL) {
GC_markers = atoi(markers_string);
} else {
GC_markers = GC_nprocs;
}
}
# endif
}
# ifdef PARALLEL_MARK
# ifdef CONDPRINT
if (GC_print_stats) {
GC_printf2("Number of processors = %ld, "
"number of marker threads = %ld\n", GC_nprocs, GC_markers);
}
# endif
if (GC_markers == 1) {
GC_parallel = FALSE;
# ifdef CONDPRINT
if (GC_print_stats) {
GC_printf0("Single marker thread, turning off parallel marking\n");
}
# endif
} else {
GC_parallel = TRUE;
/* Disable true incremental collection, but generational is OK. */
GC_time_limit = GC_TIME_UNLIMITED;
}
# endif
}
/* Perform all initializations, including those that */
/* may require allocation. */
/* Called without allocation lock. */
/* Must be called before a second thread is created. */
/* Called without allocation lock. */
void GC_init_parallel()
{
if (parallel_initialized) return;
parallel_initialized = TRUE;
/* GC_init() calls us back, so set flag first. */
if (!GC_is_initialized) GC_init();
/* If we are using a parallel marker, start the helper threads. */
# ifdef PARALLEL_MARK
if (GC_parallel) start_mark_threads();
# endif
/* Initialize thread local free lists if used. */
# if defined(THREAD_LOCAL_ALLOC) && !defined(DBG_HDRS_ALL)
LOCK();
GC_init_thread_local(GC_lookup_thread(pthread_self()));
UNLOCK();
# endif
}
#if !defined(GC_DARWIN_THREADS)
int WRAP_FUNC(pthread_sigmask)(int how, const sigset_t *set, sigset_t *oset)
{
sigset_t fudged_set;
if (set != NULL && (how == SIG_BLOCK || how == SIG_SETMASK)) {
fudged_set = *set;
sigdelset(&fudged_set, SIG_SUSPEND);
set = &fudged_set;
}
return(REAL_FUNC(pthread_sigmask)(how, set, oset));
}
#endif /* !GC_DARWIN_THREADS */
/* Wrappers for functions that are likely to block for an appreciable */
/* length of time. Must be called in pairs, if at all. */
/* Nothing much beyond the system call itself should be executed */
/* between these. */
void GC_start_blocking(void) {
# define SP_SLOP 128
GC_thread me;
LOCK();
me = GC_lookup_thread(pthread_self());
GC_ASSERT(!(me -> thread_blocked));
# ifdef SPARC
me -> stop_info.stack_ptr = (ptr_t)GC_save_regs_in_stack();
# else
# ifndef GC_DARWIN_THREADS
me -> stop_info.stack_ptr = (ptr_t)GC_approx_sp();
# endif
# endif
# ifdef IA64
me -> backing_store_ptr = (ptr_t)GC_save_regs_in_stack() + SP_SLOP;
# endif
/* Add some slop to the stack pointer, since the wrapped call may */
/* end up pushing more callee-save registers. */
# ifndef GC_DARWIN_THREADS
# ifdef STACK_GROWS_UP
me -> stop_info.stack_ptr += SP_SLOP;
# else
me -> stop_info.stack_ptr -= SP_SLOP;
# endif
# endif
me -> thread_blocked = TRUE;
UNLOCK();
}
void GC_end_blocking(void) {
GC_thread me;
LOCK(); /* This will block if the world is stopped. */
me = GC_lookup_thread(pthread_self());
GC_ASSERT(me -> thread_blocked);
me -> thread_blocked = FALSE;
UNLOCK();
}
#if defined(GC_DGUX386_THREADS)
#define __d10_sleep sleep
#endif /* GC_DGUX386_THREADS */
/* A wrapper for the standard C sleep function */
int WRAP_FUNC(sleep) (unsigned int seconds)
{
int result;
GC_start_blocking();
result = REAL_FUNC(sleep)(seconds);
GC_end_blocking();
return result;
}
struct start_info {
void *(*start_routine)(void *);
void *arg;
word flags;
sem_t registered; /* 1 ==> in our thread table, but */
/* parent hasn't yet noticed. */
};
/* Called at thread exit. */
/* Never called for main thread. That's OK, since it */
/* results in at most a tiny one-time leak. And */
/* linuxthreads doesn't reclaim the main threads */
/* resources or id anyway. */
void GC_thread_exit_proc(void *arg)
{
GC_thread me;
LOCK();
me = GC_lookup_thread(pthread_self());
GC_destroy_thread_local(me);
if (me -> flags & DETACHED) {
GC_delete_thread(pthread_self());
} else {
me -> flags |= FINISHED;
}
# if defined(THREAD_LOCAL_ALLOC) && !defined(USE_PTHREAD_SPECIFIC) \
&& !defined(USE_HPUX_TLS) && !defined(DBG_HDRS_ALL)
GC_remove_specific(GC_thread_key);
# endif
GC_wait_for_gc_completion(FALSE);
UNLOCK();
}
int WRAP_FUNC(pthread_join)(pthread_t thread, void **retval)
{
int result;
GC_thread thread_gc_id;
LOCK();
thread_gc_id = GC_lookup_thread(thread);
/* This is guaranteed to be the intended one, since the thread id */
/* cant have been recycled by pthreads. */
UNLOCK();
result = REAL_FUNC(pthread_join)(thread, retval);
# if defined (GC_FREEBSD_THREADS)
/* On FreeBSD, the wrapped pthread_join() sometimes returns (what
appears to be) a spurious EINTR which caused the test and real code
to gratuitously fail. Having looked at system pthread library source
code, I see how this return code may be generated. In one path of
code, pthread_join() just returns the errno setting of the thread
being joined. This does not match the POSIX specification or the
local man pages thus I have taken the liberty to catch this one
spurious return value properly conditionalized on GC_FREEBSD_THREADS. */
if (result == EINTR) result = 0;
# endif
if (result == 0) {
LOCK();
/* Here the pthread thread id may have been recycled. */
GC_delete_gc_thread(thread, thread_gc_id);
UNLOCK();
}
return result;
}
int
WRAP_FUNC(pthread_detach)(pthread_t thread)
{
int result;
GC_thread thread_gc_id;
LOCK();
thread_gc_id = GC_lookup_thread(thread);
UNLOCK();
result = REAL_FUNC(pthread_detach)(thread);
if (result == 0) {
LOCK();
thread_gc_id -> flags |= DETACHED;
/* Here the pthread thread id may have been recycled. */
if (thread_gc_id -> flags & FINISHED) {
GC_delete_gc_thread(thread, thread_gc_id);
}
UNLOCK();
}
return result;
}
void * GC_start_routine(void * arg)
{
int dummy;
struct start_info * si = arg;
void * result;
GC_thread me;
pthread_t my_pthread;
void *(*start)(void *);
void *start_arg;
my_pthread = pthread_self();
# ifdef DEBUG_THREADS
GC_printf1("Starting thread 0x%lx\n", my_pthread);
GC_printf1("pid = %ld\n", (long) getpid());
GC_printf1("sp = 0x%lx\n", (long) &arg);
# endif
LOCK();
me = GC_new_thread(my_pthread);
#ifdef GC_DARWIN_THREADS
me -> stop_info.mach_thread = mach_thread_self();
#else
me -> stop_info.stack_ptr = 0;
#endif
me -> flags = si -> flags;
/* me -> stack_end = GC_linux_stack_base(); -- currently (11/99) */
/* doesn't work because the stack base in /proc/self/stat is the */
/* one for the main thread. There is a strong argument that that's */
/* a kernel bug, but a pervasive one. */
# ifdef STACK_GROWS_DOWN
me -> stack_end = (ptr_t)(((word)(&dummy) + (GC_page_size - 1))
& ~(GC_page_size - 1));
# ifndef GC_DARWIN_THREADS
me -> stop_info.stack_ptr = me -> stack_end - 0x10;
# endif
/* Needs to be plausible, since an asynchronous stack mark */
/* should not crash. */
# else
me -> stack_end = (ptr_t)((word)(&dummy) & ~(GC_page_size - 1));
me -> stop_info.stack_ptr = me -> stack_end + 0x10;
# endif
/* This is dubious, since we may be more than a page into the stack, */
/* and hence skip some of it, though it's not clear that matters. */
# ifdef IA64
me -> backing_store_end = (ptr_t)
(GC_save_regs_in_stack() & ~(GC_page_size - 1));
/* This is also < 100% convincing. We should also read this */
/* from /proc, but the hook to do so isn't there yet. */
# endif /* IA64 */
UNLOCK();
start = si -> start_routine;
# ifdef DEBUG_THREADS
GC_printf1("start_routine = 0x%lx\n", start);
# endif
start_arg = si -> arg;
sem_post(&(si -> registered)); /* Last action on si. */
/* OK to deallocate. */
pthread_cleanup_push(GC_thread_exit_proc, 0);
# if defined(THREAD_LOCAL_ALLOC) && !defined(DBG_HDRS_ALL)
LOCK();
GC_init_thread_local(me);
UNLOCK();
# endif
result = (*start)(start_arg);
#if DEBUG_THREADS
GC_printf1("Finishing thread 0x%x\n", pthread_self());
#endif
me -> status = result;
pthread_cleanup_pop(1);
/* Cleanup acquires lock, ensuring that we can't exit */
/* while a collection that thinks we're alive is trying to stop */
/* us. */
return(result);
}
int
WRAP_FUNC(pthread_create)(pthread_t *new_thread,
const pthread_attr_t *attr,
void *(*start_routine)(void *), void *arg)
{
int result;
int detachstate;
word my_flags = 0;
struct start_info * si;
/* This is otherwise saved only in an area mmapped by the thread */
/* library, which isn't visible to the collector. */
/* We resist the temptation to muck with the stack size here, */
/* even if the default is unreasonably small. That's the client's */
/* responsibility. */
LOCK();
si = (struct start_info *)GC_INTERNAL_MALLOC(sizeof(struct start_info),
NORMAL);
UNLOCK();
if (!parallel_initialized) GC_init_parallel();
if (0 == si) return(ENOMEM);
sem_init(&(si -> registered), 0, 0);
si -> start_routine = start_routine;
si -> arg = arg;
LOCK();
if (!GC_thr_initialized) GC_thr_init();
# ifdef GC_ASSERTIONS
{
int stack_size;
if (NULL == attr) {
pthread_attr_t my_attr;
pthread_attr_init(&my_attr);
pthread_attr_getstacksize(&my_attr, &stack_size);
} else {
pthread_attr_getstacksize(attr, &stack_size);
}
GC_ASSERT(stack_size >= (8*HBLKSIZE*sizeof(word)));
/* Our threads may need to do some work for the GC. */
/* Ridiculously small threads won't work, and they */
/* probably wouldn't work anyway. */
}
# endif
if (NULL == attr) {
detachstate = PTHREAD_CREATE_JOINABLE;
} else {
pthread_attr_getdetachstate(attr, &detachstate);
}
if (PTHREAD_CREATE_DETACHED == detachstate) my_flags |= DETACHED;
si -> flags = my_flags;
UNLOCK();
# ifdef DEBUG_THREADS
GC_printf1("About to start new thread from thread 0x%X\n",
pthread_self());
# endif
result = REAL_FUNC(pthread_create)(new_thread, attr, GC_start_routine, si);
# ifdef DEBUG_THREADS
GC_printf1("Started thread 0x%X\n", *new_thread);
# endif
/* Wait until child has been added to the thread table. */
/* This also ensures that we hold onto si until the child is done */
/* with it. Thus it doesn't matter whether it is otherwise */
/* visible to the collector. */
if (0 == result) {
while (0 != sem_wait(&(si -> registered))) {
if (EINTR != errno) ABORT("sem_wait failed");
}
}
sem_destroy(&(si -> registered));
LOCK();
GC_INTERNAL_FREE(si);
UNLOCK();
return(result);
}
#ifdef GENERIC_COMPARE_AND_SWAP
pthread_mutex_t GC_compare_and_swap_lock = PTHREAD_MUTEX_INITIALIZER;
GC_bool GC_compare_and_exchange(volatile GC_word *addr,
GC_word old, GC_word new_val)
{
GC_bool result;
pthread_mutex_lock(&GC_compare_and_swap_lock);
if (*addr == old) {
*addr = new_val;
result = TRUE;
} else {
result = FALSE;
}
pthread_mutex_unlock(&GC_compare_and_swap_lock);
return result;
}
GC_word GC_atomic_add(volatile GC_word *addr, GC_word how_much)
{
GC_word old;
pthread_mutex_lock(&GC_compare_and_swap_lock);
old = *addr;
*addr = old + how_much;
pthread_mutex_unlock(&GC_compare_and_swap_lock);
return old;
}
#endif /* GENERIC_COMPARE_AND_SWAP */
/* Spend a few cycles in a way that can't introduce contention with */
/* othre threads. */
void GC_pause()
{
int i;
# ifndef __GNUC__
volatile word dummy = 0;
# endif
for (i = 0; i < 10; ++i) {
# ifdef __GNUC__
__asm__ __volatile__ (" " : : : "memory");
# else
/* Something that's unlikely to be optimized away. */
GC_noop(++dummy);
# endif
}
}
#define SPIN_MAX 1024 /* Maximum number of calls to GC_pause before */
/* give up. */
VOLATILE GC_bool GC_collecting = 0;
/* A hint that we're in the collector and */
/* holding the allocation lock for an */
/* extended period. */
#if !defined(USE_SPIN_LOCK) || defined(PARALLEL_MARK)
/* If we don't want to use the below spinlock implementation, either */
/* because we don't have a GC_test_and_set implementation, or because */
/* we don't want to risk sleeping, we can still try spinning on */
/* pthread_mutex_trylock for a while. This appears to be very */
/* beneficial in many cases. */
/* I suspect that under high contention this is nearly always better */
/* than the spin lock. But it's a bit slower on a uniprocessor. */
/* Hence we still default to the spin lock. */
/* This is also used to acquire the mark lock for the parallel */
/* marker. */
/* Here we use a strict exponential backoff scheme. I don't know */
/* whether that's better or worse than the above. We eventually */
/* yield by calling pthread_mutex_lock(); it never makes sense to */
/* explicitly sleep. */
void GC_generic_lock(pthread_mutex_t * lock)
{
#ifndef NO_PTHREAD_TRYLOCK
unsigned pause_length = 1;
unsigned i;
if (0 == pthread_mutex_trylock(lock)) return;
for (; pause_length <= SPIN_MAX; pause_length <<= 1) {
for (i = 0; i < pause_length; ++i) {
GC_pause();
}
switch(pthread_mutex_trylock(lock)) {
case 0:
return;
case EBUSY:
break;
default:
ABORT("Unexpected error from pthread_mutex_trylock");
}
}
#endif /* !NO_PTHREAD_TRYLOCK */
pthread_mutex_lock(lock);
}
#endif /* !USE_SPIN_LOCK || PARALLEL_MARK */
#if defined(USE_SPIN_LOCK)
/* Reasonably fast spin locks. Basically the same implementation */
/* as STL alloc.h. This isn't really the right way to do this. */
/* but until the POSIX scheduling mess gets straightened out ... */
volatile unsigned int GC_allocate_lock = 0;
void GC_lock()
{
# define low_spin_max 30 /* spin cycles if we suspect uniprocessor */
# define high_spin_max SPIN_MAX /* spin cycles for multiprocessor */
static unsigned spin_max = low_spin_max;
unsigned my_spin_max;
static unsigned last_spins = 0;
unsigned my_last_spins;
int i;
if (!GC_test_and_set(&GC_allocate_lock)) {
return;
}
my_spin_max = spin_max;
my_last_spins = last_spins;
for (i = 0; i < my_spin_max; i++) {
if (GC_collecting || GC_nprocs == 1) goto yield;
if (i < my_last_spins/2 || GC_allocate_lock) {
GC_pause();
continue;
}
if (!GC_test_and_set(&GC_allocate_lock)) {
/*
* got it!
* Spinning worked. Thus we're probably not being scheduled
* against the other process with which we were contending.
* Thus it makes sense to spin longer the next time.
*/
last_spins = i;
spin_max = high_spin_max;
return;
}
}
/* We are probably being scheduled against the other process. Sleep. */
spin_max = low_spin_max;
yield:
for (i = 0;; ++i) {
if (!GC_test_and_set(&GC_allocate_lock)) {
return;
}
# define SLEEP_THRESHOLD 12
/* Under Linux very short sleeps tend to wait until */
/* the current time quantum expires. On old Linux */
/* kernels nanosleep(<= 2ms) just spins under Linux. */
/* (Under 2.4, this happens only for real-time */
/* processes.) We want to minimize both behaviors */
/* here. */
if (i < SLEEP_THRESHOLD) {
sched_yield();
} else {
struct timespec ts;
if (i > 24) i = 24;
/* Don't wait for more than about 15msecs, even */
/* under extreme contention. */
ts.tv_sec = 0;
ts.tv_nsec = 1 << i;
nanosleep(&ts, 0);
}
}
}
#else /* !USE_SPINLOCK */
void GC_lock()
{
#ifndef NO_PTHREAD_TRYLOCK
if (1 == GC_nprocs || GC_collecting) {
pthread_mutex_lock(&GC_allocate_ml);
} else {
GC_generic_lock(&GC_allocate_ml);
}
#else /* !NO_PTHREAD_TRYLOCK */
pthread_mutex_lock(&GC_allocate_ml);
#endif /* !NO_PTHREAD_TRYLOCK */
}
#endif /* !USE_SPINLOCK */
#if defined(PARALLEL_MARK) || defined(THREAD_LOCAL_ALLOC)
#ifdef GC_ASSERTIONS
pthread_t GC_mark_lock_holder = NO_THREAD;
#endif
#if 0
/* Ugly workaround for a linux threads bug in the final versions */
/* of glibc2.1. Pthread_mutex_trylock sets the mutex owner */
/* field even when it fails to acquire the mutex. This causes */
/* pthread_cond_wait to die. Remove for glibc2.2. */
/* According to the man page, we should use */
/* PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP, but that isn't actually */
/* defined. */
static pthread_mutex_t mark_mutex =
{0, 0, 0, PTHREAD_MUTEX_ERRORCHECK_NP, {0, 0}};
#else
static pthread_mutex_t mark_mutex = PTHREAD_MUTEX_INITIALIZER;
#endif
static pthread_cond_t builder_cv = PTHREAD_COND_INITIALIZER;
void GC_acquire_mark_lock()
{
/*
if (pthread_mutex_lock(&mark_mutex) != 0) {
ABORT("pthread_mutex_lock failed");
}
*/
GC_generic_lock(&mark_mutex);
# ifdef GC_ASSERTIONS
GC_mark_lock_holder = pthread_self();
# endif
}
void GC_release_mark_lock()
{
GC_ASSERT(GC_mark_lock_holder == pthread_self());
# ifdef GC_ASSERTIONS
GC_mark_lock_holder = NO_THREAD;
# endif
if (pthread_mutex_unlock(&mark_mutex) != 0) {
ABORT("pthread_mutex_unlock failed");
}
}
/* Collector must wait for a freelist builders for 2 reasons: */
/* 1) Mark bits may still be getting examined without lock. */
/* 2) Partial free lists referenced only by locals may not be scanned */
/* correctly, e.g. if they contain "pointer-free" objects, since the */
/* free-list link may be ignored. */
void GC_wait_builder()
{
GC_ASSERT(GC_mark_lock_holder == pthread_self());
# ifdef GC_ASSERTIONS
GC_mark_lock_holder = NO_THREAD;
# endif
if (pthread_cond_wait(&builder_cv, &mark_mutex) != 0) {
ABORT("pthread_cond_wait failed");
}
GC_ASSERT(GC_mark_lock_holder == NO_THREAD);
# ifdef GC_ASSERTIONS
GC_mark_lock_holder = pthread_self();
# endif
}
void GC_wait_for_reclaim()
{
GC_acquire_mark_lock();
while (GC_fl_builder_count > 0) {
GC_wait_builder();
}
GC_release_mark_lock();
}
void GC_notify_all_builder()
{
GC_ASSERT(GC_mark_lock_holder == pthread_self());
if (pthread_cond_broadcast(&builder_cv) != 0) {
ABORT("pthread_cond_broadcast failed");
}
}
#endif /* PARALLEL_MARK || THREAD_LOCAL_ALLOC */
#ifdef PARALLEL_MARK
static pthread_cond_t mark_cv = PTHREAD_COND_INITIALIZER;
void GC_wait_marker()
{
GC_ASSERT(GC_mark_lock_holder == pthread_self());
# ifdef GC_ASSERTIONS
GC_mark_lock_holder = NO_THREAD;
# endif
if (pthread_cond_wait(&mark_cv, &mark_mutex) != 0) {
ABORT("pthread_cond_wait failed");
}
GC_ASSERT(GC_mark_lock_holder == NO_THREAD);
# ifdef GC_ASSERTIONS
GC_mark_lock_holder = pthread_self();
# endif
}
void GC_notify_all_marker()
{
if (pthread_cond_broadcast(&mark_cv) != 0) {
ABORT("pthread_cond_broadcast failed");
}
}
#endif /* PARALLEL_MARK */
# endif /* GC_LINUX_THREADS and friends */
Reference in New Issue Copy Permalink