gcc/config/acx.m4

330 lines
10 KiB
Plaintext
Raw Normal View History

# Autoconf M4 include file defining utility macros for complex Canadian
# cross builds.
dnl ####
dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
dnl # $build_alias or canonical $build if blank.
dnl # Used when we would use $build_alias, but empty is not OK.
AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_BUILD],
[AC_REQUIRE([AC_CANONICAL_BUILD]) []dnl
case ${build_alias} in
"") build_noncanonical=${build} ;;
*) build_noncanonical=${build_alias} ;;
esac
]) []dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
dnl ####
dnl # _GCC_TOPLEV_NONCANONICAL_HOST
dnl # $host_alias, or $build_noncanonical if blank.
dnl # Used when we would use $host_alias, but empty is not OK.
AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_HOST],
[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
case ${host_alias} in
"") host_noncanonical=${build_noncanonical} ;;
*) host_noncanonical=${host_alias} ;;
esac
]) []dnl # _GCC_TOPLEV_NONCANONICAL_HOST
dnl ####
dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
dnl # $target_alias or $host_noncanonical if blank.
dnl # Used when we would use $target_alias, but empty is not OK.
AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_TARGET],
[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
case ${target_alias} in
"") target_noncanonical=${host_noncanonical} ;;
*) target_noncanonical=${target_alias} ;;
esac
]) []dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
dnl ####
dnl # ACX_NONCANONICAL_BUILD
dnl # Like underscored version, but AC_SUBST's.
AC_DEFUN([ACX_NONCANONICAL_BUILD],
[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
AC_SUBST(build_noncanonical)
]) []dnl # ACX_NONCANONICAL_BUILD
dnl ####
dnl # ACX_NONCANONICAL_HOST
dnl # Like underscored version, but AC_SUBST's.
AC_DEFUN([ACX_NONCANONICAL_HOST],
[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
AC_SUBST(host_noncanonical)
]) []dnl # ACX_NONCANONICAL_HOST
dnl ####
dnl # ACX_NONCANONICAL_TARGET
dnl # Like underscored version, but AC_SUBST's.
AC_DEFUN([ACX_NONCANONICAL_TARGET],
[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
AC_SUBST(target_noncanonical)
]) []dnl # ACX_NONCANONICAL_TARGET
dnl ####
dnl # GCC_TOPLEV_SUBDIRS
dnl # GCC & friends build 'build', 'host', and 'target' tools. These must
dnl # be separated into three well-known subdirectories of the build directory:
dnl # build_subdir, host_subdir, and target_subdir. The values are determined
dnl # here so that they can (theoretically) be changed in the future. They
dnl # were previously reproduced across many different files.
dnl #
dnl # This logic really amounts to very little with autoconf 2.13; it will
dnl # amount to a lot more with autoconf 2.5x.
AC_DEFUN([GCC_TOPLEV_SUBDIRS],
[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
re PR bootstrap/17383 (Building in src dir fails) 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.def (target_modules): Remove "stage", now unnecessary. * Makefile.tpl (HOST_SUBDIR): New substitution. (STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET, USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET, USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET, USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it. (Host modules, Bootstrapped modules): Use it. (Build modules, Target modules): Do not create symlink trees, always configure out-of-srcdir. (distclean): Try removing $(host_subdir) with rm before using rm -rf. * configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET, GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use $(HOST_SUBDIR). Create a symlink for host_subdir. * Makefile.in: Regenerate. * configure: Regenerate. config: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * config/acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src gcc build is going. gcc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * gcc/Makefile.in (host_subdir): New. (build_objdir): New. Replace ../$(build_subdir) with it throughout. * gcc/configure: Regenerate. libada: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * Makefile.in (GCC_DIR): Add $(HOST_SUBDIR) to the definition. libjava: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (COMPPATH): Removed. (ZIP, GCJH): Replace it with ../$(host_subdir). (built_gcc_dir): Add $(host_subdir). * configure: Regenerate. * Makefile.in, include/Makefile.in, testsuite/Makefile.in, gcj/Makefile.in, external/Makefile.in, external/sax/Makefile.in, external/w3c_dom/Makefile.in: Regenerate. libobjc: 2005-05-25 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/17383 * configure.ac: Call GCC_TOPLEV_SUBDIRS. (Determine CFLAGS for gthread): Use $host_subdir. * configure: Regenerate. * Makefile.in (host_subdir): New. (INCLUDES): Use it. From-SVN: r95680
2005-02-28 14:26:36 +01:00
# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
if ( test $srcdir = . && test -d gcc ) \
|| test -d $srcdir/../host-${host_noncanonical}; then
host_subdir="host-${host_noncanonical}"
else
host_subdir=.
fi
# No prefix.
target_subdir=${target_noncanonical}
AC_SUBST([build_subdir]) []dnl
AC_SUBST([host_subdir]) []dnl
AC_SUBST([target_subdir]) []dnl
]) []dnl # GCC_TOPLEV_SUBDIRS
####
# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
# or AC_INIT.
# These demand that AC_CANONICAL_SYSTEM be called beforehand.
AC_DEFUN([_NCN_TOOL_PREFIXES],
[ncn_tool_prefix=
test -n "$host_alias" && ncn_tool_prefix=$host_alias-
ncn_target_tool_prefix=
test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
]) []dnl # _NCN_TOOL_PREFIXES
####
# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
# Like plain AC_CHECK_TOOLS, but require prefix if build!=target.
AC_DEFUN([NCN_STRICT_CHECK_TOOLS],
[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
for ncn_progname in $2; do
if test -n "$ncn_tool_prefix"; then
AC_CHECK_PROG([$1], [${ncn_tool_prefix}${ncn_progname}],
[${ncn_tool_prefix}${ncn_progname}], , [$4])
fi
if test -z "$ac_cv_prog_$1" && test $build = $host ; then
AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
fi
test -n "$ac_cv_prog_$1" && break
done
if test -z "$ac_cv_prog_$1" ; then
ifelse([$3],[], [set dummy $2
if test $build = $host ; then
$1="[$]2"
else
$1="${ncn_tool_prefix}[$]2"
fi], [$1="$3"])
fi
]) []dnl # NCN_STRICT_CHECK_TOOLS
####
# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOLS],
[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
for ncn_progname in $2; do
if test -n "$ncn_target_tool_prefix"; then
AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}${ncn_progname}],
[${ncn_target_tool_prefix}${ncn_progname}], , [$4])
fi
if test -z "$ac_cv_prog_$1" && test $build = $target ; then
AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
fi
test -n "$ac_cv_prog_$1" && break
done
if test -z "$ac_cv_prog_$1" ; then
ifelse([$3],[], [set dummy $2
if test $build = $target ; then
$1="[$]2"
else
$1="${ncn_target_tool_prefix}[$]2"
fi], [$1="$3"])
fi
]) []dnl # NCN_STRICT_CHECK_TARGET_TOOLS
###
# AC_PROG_CPP_WERROR
# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
# triggers warnings from the preprocessor. Will be in autoconf 2.58.
# For now, using this also overrides header checks to use only the
# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
# bit harder from here).
# Eventually autoconf will default to checking headers with the compiler
# instead, and we'll have to do this differently.
AC_DEFUN([AC_PROG_CPP_WERROR],
[AC_REQUIRE([AC_PROG_CPP])dnl
m4_define([AC_CHECK_HEADER],m4_defn([_AC_CHECK_HEADER_OLD]))
ac_c_preproc_warn_flag=yes])# AC_PROG_CPP_WERROR
# Test for GNAT.
# We require the gnatbind program, and a compiler driver that
# understands Ada. We use the user's CC setting, already found.
#
# Sets the shell variable have_gnat to yes or no as appropriate, and
# substitutes GNATBIND.
AC_DEFUN([ACX_PROG_GNAT],
[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])
AC_REQUIRE([AC_PROG_CC])
AC_CHECK_TOOL(GNATBIND, gnatbind, no)
AC_CACHE_CHECK([whether compiler driver understands Ada],
acx_cv_cc_gcc_supports_ada,
[cat >conftest.adb <<EOF
procedure conftest is begin null; end conftest;
EOF
acx_cv_cc_gcc_supports_ada=no
# There is a bug in old released versions of GCC which causes the
# driver to exit successfully when the appropriate language module
# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
# Therefore we must check for the error message as well as an
# unsuccessful exit.
# Other compilers, like HP Tru64 UNIX cc, exit successfully when
# given a .adb file, but produce no object file. So we must check
# if an object file was really produced to guard against this.
errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
if test x"$errors" = x && test -f conftest.$ac_objext; then
acx_cv_cc_gcc_supports_ada=yes
fi
rm -f conftest.*])
if test x$GNATBIND != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
have_gnat=yes
else
have_gnat=no
fi
])
dnl 'make compare' can be significantly faster, if cmp itself can
dnl skip bytes instead of using tail. The test being performed is
dnl "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2"
dnl but we need to sink errors and handle broken shells. We also test
dnl for the parameter format "cmp file1 file2 skip1 skip2" which is
dnl accepted by cmp on some systems.
AC_DEFUN([ACX_PROG_CMP_IGNORE_INITIAL],
[AC_CACHE_CHECK([how to compare bootstrapped objects], gcc_cv_prog_cmp_skip,
[ echo abfoo >t1
echo cdfoo >t2
gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
if cmp t1 t2 2 2 > /dev/null 2>&1; then
if cmp t1 t2 1 1 > /dev/null 2>&1; then
:
else
gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
fi
fi
if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
:
else
gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
fi
fi
rm t1 t2
])
do_compare="$gcc_cv_prog_cmp_skip"
AC_SUBST(do_compare)
])
Makefile.def (host_modules): add libcpp. ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> * Makefile.def (host_modules): add libcpp. * Makefile.tpl: Add dependencies on and for libcpp. * Makefile.in: Regenerate. * configure.in: Add libcpp host module. * configure: Regenerate. config/ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (ACX_HEADER_STDBOOL, ACX_HEADER_STRING): From gcc. gcc/ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> Move libcpp to the toplevel. * Makefile.in: Remove references to libcpp files, use CPPLIBS instead of libcpp.a. Define SYMTAB_H and change hashtable.h to that. * aclocal.m4 (gcc_AC_HEADER_STDBOOL, gcc_AC_HEADER_STRING, gcc_AC_C__BOOL): Remove. * configure.ac (gcc_AC_C__BOOL, HAVE_UCHAR): Remove tests. * configure: Regenerate. * config.in: Regenerate. * c-ppoutput.c: Include ../libcpp/internal.h instead of cpphash.h. * cppcharset.c: Removed. * cpperror.c: Removed. * cppexp.c: Removed. * cppfiles.c: Removed. * cpphash.c: Removed. * cpphash.h: Removed. * cppinit.c: Removed. * cpplex.c: Removed. * cpplib.c: Removed. * cpplib.h: Removed. * cppmacro.c: Removed. * cpppch.c: Removed. * cpptrad.c: Removed. * cppucnid.h: Removed. * cppucnid.pl: Removed. * cppucnid.tab: Removed. * hashtable.c: Removed. * hashtable.h: Removed. * line-map.c: Removed. * line-map.h: Removed. * mkdeps.c: Removed. * mkdeps.h: Removed. * stringpool.h: Include symtab.h instead of hashtable.h. * tree.h: Include symtab.h instead of hashtable.h. * system.h (O_NONBLOCK, O_NOCTTY): Do not define. gcc/cp/ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> * Make-lang.in: No need to specify $(LIBCPP). gcc/java/ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> * Make-lang.in: Link in $(LIBCPP) instead of mkdeps.o. libcpp/ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> Moved libcpp from the gcc subdirectory to the toplevel. * Makefile.am: New file. * Makefile.in: Regenerate. * configure.ac: New file. * configure: Regenerate. * config.in: Regenerate. * charset.c: Moved from gcc/cppcharset.c. Add note about brokenness of input charset detection. Adjust for change in name of cppucnid.h. * errors.c: Moved from gcc/cpperror.c. Do not include intl.h. * expr.c: Moved from gcc/cppexp.c. * files.c: Moved from gcc/cppfiles.c. Do not include intl.h. Remove #define of O_BINARY, it is in system.h. * identifiers.c: Moved from gcc/cpphash.c. * internal.h: Moved from gcc/cpphash.h. Change header guard name. All other files adjusted to match name change. * init.c: Moved from gcc/cppinit.c. (init_library) [ENABLE_NLS]: Call bindtextdomain. * lex.c: Moved from gcc/cpplex.c. * directives.c: Moved from gcc/cpplib.c. * macro.c: Moved from gcc/cppmacro.c. * pch.c: Moved from gcc/cpppch.c. Do not include intl.h. * traditional.c: Moved from gcc/cpptrad.c. * ucnid.h: Moved from gcc/cppucnid.h. Change header guard name. * ucnid.pl: Moved from gcc/cppucnid.pl. * ucnid.tab: Moved from gcc/cppucnid.tab. Change header guard name. * symtab.c: Moved from gcc/hashtable.c. * line-map.c: Moved from gcc. Do not include intl.h. * mkdeps.c: Moved from gcc. * system.h: New file. libcpp/include/ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> * cpplib.h: Moved from gcc. Change header guard name. * line-map.h: Moved from gcc. Change header guard name. * mkdeps.h: Moved from gcc. Change header guard name. * symtab.h: Moved from gcc/hashtable.h. Change header guard name. libcpp/po/ChangeLog: 2004-05-23 Paolo Bonzini <bonzini@gnu.org> * be.po: Extracted from gcc/po/be.po. * ca.po: Extracted from gcc/po/ca.po. * da.po: Extracted from gcc/po/da.po. * de.po: Extracted from gcc/po/de.po. * el.po: Extracted from gcc/po/el.po. * es.po: Extracted from gcc/po/es.po. * fr.po: Extracted from gcc/po/fr.po. * ja.po: Extracted from gcc/po/ja.po. * nl.po: Extracted from gcc/po/nl.po. * sv.po: Extracted from gcc/po/sv.po. * tr.po: Extracted from gcc/po/tr.po. From-SVN: r82199
2004-05-24 12:50:45 +02:00
dnl See whether we can include both string.h and strings.h.
AC_DEFUN([ACX_HEADER_STRING],
[AC_CACHE_CHECK([whether string.h and strings.h may both be included],
gcc_cv_header_string,
[AC_TRY_COMPILE([#include <string.h>
#include <strings.h>], , gcc_cv_header_string=yes, gcc_cv_header_string=no)])
if test $gcc_cv_header_string = yes; then
AC_DEFINE(STRING_WITH_STRINGS, 1, [Define if you can safely include both <string.h> and <strings.h>.])
fi
])
dnl See if stdbool.h properly defines bool and true/false.
dnl Check whether _Bool is built-in.
AC_DEFUN([ACX_HEADER_STDBOOL],
[AC_CACHE_CHECK([for working stdbool.h],
ac_cv_header_stdbool_h,
[AC_TRY_COMPILE([#include <stdbool.h>],
[bool foo = false;],
ac_cv_header_stdbool_h=yes, ac_cv_header_stdbool_h=no)])
if test $ac_cv_header_stdbool_h = yes; then
AC_DEFINE(HAVE_STDBOOL_H, 1,
[Define if you have a working <stdbool.h> header file.])
fi
AC_CACHE_CHECK(for built-in _Bool, gcc_cv_c__bool,
[AC_TRY_COMPILE(,
[_Bool foo;],
gcc_cv_c__bool=yes, gcc_cv_c__bool=no)
])
if test $gcc_cv_c__bool = yes; then
AC_DEFINE(HAVE__BOOL, 1, [Define if the \`_Bool' type is built-in.])
fi
])
dnl See if hard links work and if not, try to substitute $1 or simple copy.
AC_DEFUN([ACX_PROG_LN],
[AC_MSG_CHECKING(whether ln works)
AC_CACHE_VAL(acx_cv_prog_LN,
[rm -f conftestdata_t
echo >conftestdata_f
if ln conftestdata_f conftestdata_t 2>/dev/null
then
acx_cv_prog_LN=ln
else
acx_cv_prog_LN=no
fi
rm -f conftestdata_f conftestdata_t
])dnl
if test $acx_cv_prog_LN = no; then
LN="ifelse([$1],,cp,[$1])"
AC_MSG_RESULT([no, using $LN])
else
LN="$acx_cv_prog_LN"
AC_MSG_RESULT(yes)
fi
AC_SUBST(LN)dnl
])
dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE)
AC_DEFUN([GCC_TARGET_TOOL],
[AC_MSG_CHECKING(where to find the target $1)
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
AC_MSG_RESULT(pre-installed)
else
ifelse([$4],,,
[ok=yes
case " ${configdirs} " in
*" patsubst([$4], [/.*], []) "*) ;;
*) ok=no ;;
esac
ifelse([$5],,,
[case ,${enable_languages}, in
*,$5,*) ;;
*) ok=no ;;
esac])
if test $ok = yes; then
# An in-tree tool is available and we can use it
$2='$$r/$(HOST_SUBDIR)/$4'
AC_MSG_RESULT(just compiled)
el])if test "x$target" = "x$host"; then
# We can use an host tool
$2='$($3)'
AC_MSG_RESULT(host tool)
else
# We need a cross tool
AC_MSG_RESULT(pre-installed)
fi
fi])