diff --git a/ChangeLog b/ChangeLog index dd14c72cb31..b10a7135cc3 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,31 @@ +2006-01-04 Paolo Bonzini + + PR bootstrap/24252 + + * Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES. + * Makefile.tpl (OBJDUMP): New. + (EXTRA_HOST_FLAGS): Add it. + (EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass. + + * Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try + to use symbolic links between directories. Avoid race conditions + or make them harmless. + * configure.in: Do not try to use symbolic links between directories. + + * Makefile.def (LEAN): Pass. + * Makefile.tpl (LEAN): Define. + (stage[+id+]-start): Accept that the previous directory does not + exist, if the bootstrap is lean. + (stage[+id+]-bubble): Invoke lean bootstrap commands after + stage[+id+]-start. Use a makefile variable and an `if' instead of a + configure substitution. + ([+compare-target+]): Likewise. + ([+bootstrap-target+]-lean): New. + * configure.in: Remove lean bootstrap support from here. + + * Makefile.in: Regenerate. + * configure: Regenerate. + 2006-01-04 Ben Elliston * MAINTAINERS (libdecnumber): Add myself. diff --git a/Makefile.def b/Makefile.def index 2fdf638fea6..acc770dc3d6 100644 --- a/Makefile.def +++ b/Makefile.def @@ -4,7 +4,7 @@ AutoGen definitions Makefile.tpl; // Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'. // This file was originally written by Nathanael Nerode. // -// Copyright 2002, 2003 Free Software Foundation +// Copyright 2002, 2003, 2004, 2005, 2006 Free Software Foundation // // This file is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -213,6 +213,8 @@ flags_to_pass = { flag= CXXFLAGS ; }; flags_to_pass = { flag= LDFLAGS ; }; flags_to_pass = { flag= LIBCFLAGS ; }; flags_to_pass = { flag= LIBCXXFLAGS ; }; +flags_to_pass = { flag= STAGE1_CFLAGS ; }; +flags_to_pass = { flag= STAGE1_LANGUAGES ; }; // Target tools flags_to_pass = { flag= AR_FOR_TARGET ; }; @@ -236,6 +238,9 @@ flags_to_pass = { flag= RANLIB_FOR_TARGET ; }; flags_to_pass = { flag= STRIP_FOR_TARGET ; }; flags_to_pass = { flag= WINDRES_FOR_TARGET ; }; +// Miscellaneous +flags_to_pass = { flag= LEAN ; }; + // Inter-module dependencies // Build modules diff --git a/Makefile.in b/Makefile.in index b0104379878..1dad15b97c4 100644 --- a/Makefile.in +++ b/Makefile.in @@ -3,7 +3,7 @@ # # Makefile for directory with subdirs to build. # Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, -# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation +# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -282,6 +282,7 @@ DLLTOOL = @DLLTOOL@ LD = @LD@ LIPO = @LIPO@ NM = @NM@ +OBJDUMP = @OBJDUMP@ RANLIB = @RANLIB@ STRIP = @STRIP@ WINDRES = @WINDRES@ @@ -440,6 +441,8 @@ BASE_FLAGS_TO_PASS = \ "LDFLAGS=$(LDFLAGS)" \ "LIBCFLAGS=$(LIBCFLAGS)" \ "LIBCXXFLAGS=$(LIBCXXFLAGS)" \ + "STAGE1_CFLAGS=$(STAGE1_CFLAGS)" \ + "STAGE1_LANGUAGES=$(STAGE1_LANGUAGES)" \ "AR_FOR_TARGET=$(AR_FOR_TARGET)" \ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ @@ -460,6 +463,7 @@ BASE_FLAGS_TO_PASS = \ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \ "STRIP_FOR_TARGET=$(STRIP_FOR_TARGET)" \ "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \ + "LEAN=$(LEAN)" \ "CONFIG_SHELL=$(SHELL)" \ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" @@ -477,6 +481,7 @@ EXTRA_HOST_FLAGS = \ 'LD=$(LD)' \ 'LIPO=$(LIPO)' \ 'NM=$(NM)' \ + 'OBJDUMP=$(OBJDUMP)' \ 'RANLIB=$(RANLIB)' \ 'STRIP=$(STRIP)' \ 'WINDRES=$(WINDRES)' @@ -534,8 +539,6 @@ EXTRA_GCC_FLAGS = \ "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ - "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ - "`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ "`echo 'BOOT_ADAFLAGS=$(BOOT_ADAFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS) @@ -35679,6 +35682,9 @@ unstage: stage: @: $(MAKE); $(stage) +# Disable commands for lean bootstrap. +LEAN = false + # We name the build directories for the various stages "stage1-gcc", # "stage2-gcc","stage3-gcc", etc. @@ -35733,146 +35739,122 @@ stage1-start:: @if bfd @cd $(HOST_SUBDIR); [ -d stage1-bfd ] || \ mkdir stage1-bfd; \ - set stage1-bfd bfd ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-bfd bfd @endif bfd @if opcodes @cd $(HOST_SUBDIR); [ -d stage1-opcodes ] || \ mkdir stage1-opcodes; \ - set stage1-opcodes opcodes ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-opcodes opcodes @endif opcodes @if binutils @cd $(HOST_SUBDIR); [ -d stage1-binutils ] || \ mkdir stage1-binutils; \ - set stage1-binutils binutils ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-binutils binutils @endif binutils @if gas @cd $(HOST_SUBDIR); [ -d stage1-gas ] || \ mkdir stage1-gas; \ - set stage1-gas gas ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-gas gas @endif gas @if gcc @cd $(HOST_SUBDIR); [ -d stage1-gcc ] || \ mkdir stage1-gcc; \ - set stage1-gcc gcc ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-gcc gcc @endif gcc @if intl @cd $(HOST_SUBDIR); [ -d stage1-intl ] || \ mkdir stage1-intl; \ - set stage1-intl intl ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-intl intl @endif intl @if ld @cd $(HOST_SUBDIR); [ -d stage1-ld ] || \ mkdir stage1-ld; \ - set stage1-ld ld ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-ld ld @endif ld @if libcpp @cd $(HOST_SUBDIR); [ -d stage1-libcpp ] || \ mkdir stage1-libcpp; \ - set stage1-libcpp libcpp ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-libcpp libcpp @endif libcpp @if libdecnumber @cd $(HOST_SUBDIR); [ -d stage1-libdecnumber ] || \ mkdir stage1-libdecnumber; \ - set stage1-libdecnumber libdecnumber ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-libdecnumber libdecnumber @endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage1-libiberty ] || \ mkdir stage1-libiberty; \ - set stage1-libiberty libiberty ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-libiberty libiberty @endif libiberty @if zlib @cd $(HOST_SUBDIR); [ -d stage1-zlib ] || \ mkdir stage1-zlib; \ - set stage1-zlib zlib ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-zlib zlib @endif zlib @[ -d stage1-$(TARGET_SUBDIR) ] || \ mkdir stage1-$(TARGET_SUBDIR); \ - set stage1-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ + mv stage1-$(TARGET_SUBDIR) $(TARGET_SUBDIR) -stage1-end:: - @rm -f stage_current +stage1-end:: @if bfd - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set bfd stage1-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/bfd ; then \ + cd $(HOST_SUBDIR); mv bfd stage1-bfd ; \ fi @endif bfd @if opcodes - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set opcodes stage1-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/opcodes ; then \ + cd $(HOST_SUBDIR); mv opcodes stage1-opcodes ; \ fi @endif opcodes @if binutils - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set binutils stage1-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/binutils ; then \ + cd $(HOST_SUBDIR); mv binutils stage1-binutils ; \ fi @endif binutils @if gas - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gas stage1-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gas ; then \ + cd $(HOST_SUBDIR); mv gas stage1-gas ; \ fi @endif gas @if gcc - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gcc stage1-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gcc ; then \ + cd $(HOST_SUBDIR); mv gcc stage1-gcc ; \ fi @endif gcc @if intl - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set intl stage1-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/intl ; then \ + cd $(HOST_SUBDIR); mv intl stage1-intl ; \ fi @endif intl @if ld - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set ld stage1-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/ld ; then \ + cd $(HOST_SUBDIR); mv ld stage1-ld ; \ fi @endif ld @if libcpp - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libcpp stage1-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libcpp ; then \ + cd $(HOST_SUBDIR); mv libcpp stage1-libcpp ; \ fi @endif libcpp @if libdecnumber - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libdecnumber stage1-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libdecnumber ; then \ + cd $(HOST_SUBDIR); mv libdecnumber stage1-libdecnumber ; \ fi @endif libdecnumber @if libiberty - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libiberty stage1-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libiberty ; then \ + cd $(HOST_SUBDIR); mv libiberty stage1-libiberty ; \ fi @endif libiberty @if zlib - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set zlib stage1-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/zlib ; then \ + cd $(HOST_SUBDIR); mv zlib stage1-zlib ; \ fi @endif zlib @if test -d $(TARGET_SUBDIR) ; then \ - set $(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ + mv $(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \ fi + rm -f stage_current # Bubble a bugfix through all the stages up to stage 1. They are # remade, but not reconfigured. The next stage (if any) will not be @@ -35919,194 +35901,146 @@ stage2-start:: @if bfd @cd $(HOST_SUBDIR); [ -d stage2-bfd ] || \ mkdir stage2-bfd; \ - set stage2-bfd bfd ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-bfd prev-bfd ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-bfd bfd ; \ + mv stage1-bfd prev-bfd || test -f stage1-lean @endif bfd @if opcodes @cd $(HOST_SUBDIR); [ -d stage2-opcodes ] || \ mkdir stage2-opcodes; \ - set stage2-opcodes opcodes ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-opcodes prev-opcodes ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-opcodes opcodes ; \ + mv stage1-opcodes prev-opcodes || test -f stage1-lean @endif opcodes @if binutils @cd $(HOST_SUBDIR); [ -d stage2-binutils ] || \ mkdir stage2-binutils; \ - set stage2-binutils binutils ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-binutils prev-binutils ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-binutils binutils ; \ + mv stage1-binutils prev-binutils || test -f stage1-lean @endif binutils @if gas @cd $(HOST_SUBDIR); [ -d stage2-gas ] || \ mkdir stage2-gas; \ - set stage2-gas gas ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-gas prev-gas ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-gas gas ; \ + mv stage1-gas prev-gas || test -f stage1-lean @endif gas @if gcc @cd $(HOST_SUBDIR); [ -d stage2-gcc ] || \ mkdir stage2-gcc; \ - set stage2-gcc gcc ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-gcc prev-gcc ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-gcc gcc ; \ + mv stage1-gcc prev-gcc || test -f stage1-lean @endif gcc @if intl @cd $(HOST_SUBDIR); [ -d stage2-intl ] || \ mkdir stage2-intl; \ - set stage2-intl intl ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-intl prev-intl ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-intl intl ; \ + mv stage1-intl prev-intl || test -f stage1-lean @endif intl @if ld @cd $(HOST_SUBDIR); [ -d stage2-ld ] || \ mkdir stage2-ld; \ - set stage2-ld ld ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-ld prev-ld ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-ld ld ; \ + mv stage1-ld prev-ld || test -f stage1-lean @endif ld @if libcpp @cd $(HOST_SUBDIR); [ -d stage2-libcpp ] || \ mkdir stage2-libcpp; \ - set stage2-libcpp libcpp ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-libcpp prev-libcpp ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-libcpp libcpp ; \ + mv stage1-libcpp prev-libcpp || test -f stage1-lean @endif libcpp @if libdecnumber @cd $(HOST_SUBDIR); [ -d stage2-libdecnumber ] || \ mkdir stage2-libdecnumber; \ - set stage2-libdecnumber libdecnumber ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-libdecnumber prev-libdecnumber ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-libdecnumber libdecnumber ; \ + mv stage1-libdecnumber prev-libdecnumber || test -f stage1-lean @endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage2-libiberty ] || \ mkdir stage2-libiberty; \ - set stage2-libiberty libiberty ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-libiberty prev-libiberty ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-libiberty libiberty ; \ + mv stage1-libiberty prev-libiberty || test -f stage1-lean @endif libiberty @if zlib @cd $(HOST_SUBDIR); [ -d stage2-zlib ] || \ mkdir stage2-zlib; \ - set stage2-zlib zlib ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-zlib prev-zlib ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-zlib zlib ; \ + mv stage1-zlib prev-zlib || test -f stage1-lean @endif zlib @[ -d stage2-$(TARGET_SUBDIR) ] || \ mkdir stage2-$(TARGET_SUBDIR); \ - set stage2-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ + mv stage2-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ + mv stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage1-lean -stage2-end:: - @rm -f stage_current +stage2-end:: @if bfd - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set bfd stage2-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-bfd stage1-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/bfd ; then \ + cd $(HOST_SUBDIR); mv bfd stage2-bfd ; \ + mv prev-bfd stage1-bfd ; : ; \ fi @endif bfd @if opcodes - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set opcodes stage2-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-opcodes stage1-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/opcodes ; then \ + cd $(HOST_SUBDIR); mv opcodes stage2-opcodes ; \ + mv prev-opcodes stage1-opcodes ; : ; \ fi @endif opcodes @if binutils - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set binutils stage2-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-binutils stage1-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/binutils ; then \ + cd $(HOST_SUBDIR); mv binutils stage2-binutils ; \ + mv prev-binutils stage1-binutils ; : ; \ fi @endif binutils @if gas - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gas stage2-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gas stage1-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gas ; then \ + cd $(HOST_SUBDIR); mv gas stage2-gas ; \ + mv prev-gas stage1-gas ; : ; \ fi @endif gas @if gcc - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gcc stage2-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gcc stage1-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gcc ; then \ + cd $(HOST_SUBDIR); mv gcc stage2-gcc ; \ + mv prev-gcc stage1-gcc ; : ; \ fi @endif gcc @if intl - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set intl stage2-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-intl stage1-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/intl ; then \ + cd $(HOST_SUBDIR); mv intl stage2-intl ; \ + mv prev-intl stage1-intl ; : ; \ fi @endif intl @if ld - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set ld stage2-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-ld stage1-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/ld ; then \ + cd $(HOST_SUBDIR); mv ld stage2-ld ; \ + mv prev-ld stage1-ld ; : ; \ fi @endif ld @if libcpp - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libcpp stage2-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libcpp stage1-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libcpp ; then \ + cd $(HOST_SUBDIR); mv libcpp stage2-libcpp ; \ + mv prev-libcpp stage1-libcpp ; : ; \ fi @endif libcpp @if libdecnumber - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libdecnumber stage2-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libdecnumber stage1-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libdecnumber ; then \ + cd $(HOST_SUBDIR); mv libdecnumber stage2-libdecnumber ; \ + mv prev-libdecnumber stage1-libdecnumber ; : ; \ fi @endif libdecnumber @if libiberty - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libiberty stage2-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libiberty stage1-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libiberty ; then \ + cd $(HOST_SUBDIR); mv libiberty stage2-libiberty ; \ + mv prev-libiberty stage1-libiberty ; : ; \ fi @endif libiberty @if zlib - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set zlib stage2-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-zlib stage1-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/zlib ; then \ + cd $(HOST_SUBDIR); mv zlib stage2-zlib ; \ + mv prev-zlib stage1-zlib ; : ; \ fi @endif zlib @if test -d $(TARGET_SUBDIR) ; then \ - set $(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ + mv $(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; \ + mv prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; : ; \ fi + rm -f stage_current # Bubble a bugfix through all the stages up to stage 2. They are # remade, but not reconfigured. The next stage (if any) will not be @@ -36131,7 +36065,7 @@ do-clean: clean-stage2 -.PHONY: bootstrap2 +.PHONY: bootstrap2 bootstrap2-lean bootstrap2: echo stage2 > stage_final @r=`${PWD_COMMAND}`; export r; \ @@ -36142,6 +36076,16 @@ bootstrap2: s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target +bootstrap2-lean: + echo stage2 > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage2-bubble + @: $(MAKE); $(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stage1:: distclean-stage2 @@ -36164,207 +36108,162 @@ stage3-start:: @if bfd @cd $(HOST_SUBDIR); [ -d stage3-bfd ] || \ mkdir stage3-bfd; \ - set stage3-bfd bfd ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-bfd prev-bfd ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-bfd bfd ; \ + mv stage2-bfd prev-bfd || test -f stage2-lean @endif bfd @if opcodes @cd $(HOST_SUBDIR); [ -d stage3-opcodes ] || \ mkdir stage3-opcodes; \ - set stage3-opcodes opcodes ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-opcodes prev-opcodes ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-opcodes opcodes ; \ + mv stage2-opcodes prev-opcodes || test -f stage2-lean @endif opcodes @if binutils @cd $(HOST_SUBDIR); [ -d stage3-binutils ] || \ mkdir stage3-binutils; \ - set stage3-binutils binutils ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-binutils prev-binutils ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-binutils binutils ; \ + mv stage2-binutils prev-binutils || test -f stage2-lean @endif binutils @if gas @cd $(HOST_SUBDIR); [ -d stage3-gas ] || \ mkdir stage3-gas; \ - set stage3-gas gas ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-gas prev-gas ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-gas gas ; \ + mv stage2-gas prev-gas || test -f stage2-lean @endif gas @if gcc @cd $(HOST_SUBDIR); [ -d stage3-gcc ] || \ mkdir stage3-gcc; \ - set stage3-gcc gcc ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-gcc prev-gcc ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-gcc gcc ; \ + mv stage2-gcc prev-gcc || test -f stage2-lean @endif gcc @if intl @cd $(HOST_SUBDIR); [ -d stage3-intl ] || \ mkdir stage3-intl; \ - set stage3-intl intl ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-intl prev-intl ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-intl intl ; \ + mv stage2-intl prev-intl || test -f stage2-lean @endif intl @if ld @cd $(HOST_SUBDIR); [ -d stage3-ld ] || \ mkdir stage3-ld; \ - set stage3-ld ld ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-ld prev-ld ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-ld ld ; \ + mv stage2-ld prev-ld || test -f stage2-lean @endif ld @if libcpp @cd $(HOST_SUBDIR); [ -d stage3-libcpp ] || \ mkdir stage3-libcpp; \ - set stage3-libcpp libcpp ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-libcpp prev-libcpp ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-libcpp libcpp ; \ + mv stage2-libcpp prev-libcpp || test -f stage2-lean @endif libcpp @if libdecnumber @cd $(HOST_SUBDIR); [ -d stage3-libdecnumber ] || \ mkdir stage3-libdecnumber; \ - set stage3-libdecnumber libdecnumber ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-libdecnumber prev-libdecnumber ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-libdecnumber libdecnumber ; \ + mv stage2-libdecnumber prev-libdecnumber || test -f stage2-lean @endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage3-libiberty ] || \ mkdir stage3-libiberty; \ - set stage3-libiberty libiberty ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-libiberty prev-libiberty ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-libiberty libiberty ; \ + mv stage2-libiberty prev-libiberty || test -f stage2-lean @endif libiberty @if zlib @cd $(HOST_SUBDIR); [ -d stage3-zlib ] || \ mkdir stage3-zlib; \ - set stage3-zlib zlib ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-zlib prev-zlib ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-zlib zlib ; \ + mv stage2-zlib prev-zlib || test -f stage2-lean @endif zlib @[ -d stage3-$(TARGET_SUBDIR) ] || \ mkdir stage3-$(TARGET_SUBDIR); \ - set stage3-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage2-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ + mv stage3-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ + mv stage2-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage2-lean -stage3-end:: - @rm -f stage_current +stage3-end:: @if bfd - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set bfd stage3-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-bfd stage2-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/bfd ; then \ + cd $(HOST_SUBDIR); mv bfd stage3-bfd ; \ + mv prev-bfd stage2-bfd ; : ; \ fi @endif bfd @if opcodes - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set opcodes stage3-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-opcodes stage2-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/opcodes ; then \ + cd $(HOST_SUBDIR); mv opcodes stage3-opcodes ; \ + mv prev-opcodes stage2-opcodes ; : ; \ fi @endif opcodes @if binutils - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set binutils stage3-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-binutils stage2-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/binutils ; then \ + cd $(HOST_SUBDIR); mv binutils stage3-binutils ; \ + mv prev-binutils stage2-binutils ; : ; \ fi @endif binutils @if gas - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gas stage3-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gas stage2-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gas ; then \ + cd $(HOST_SUBDIR); mv gas stage3-gas ; \ + mv prev-gas stage2-gas ; : ; \ fi @endif gas @if gcc - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gcc stage3-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gcc stage2-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gcc ; then \ + cd $(HOST_SUBDIR); mv gcc stage3-gcc ; \ + mv prev-gcc stage2-gcc ; : ; \ fi @endif gcc @if intl - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set intl stage3-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-intl stage2-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/intl ; then \ + cd $(HOST_SUBDIR); mv intl stage3-intl ; \ + mv prev-intl stage2-intl ; : ; \ fi @endif intl @if ld - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set ld stage3-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-ld stage2-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/ld ; then \ + cd $(HOST_SUBDIR); mv ld stage3-ld ; \ + mv prev-ld stage2-ld ; : ; \ fi @endif ld @if libcpp - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libcpp stage3-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libcpp stage2-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libcpp ; then \ + cd $(HOST_SUBDIR); mv libcpp stage3-libcpp ; \ + mv prev-libcpp stage2-libcpp ; : ; \ fi @endif libcpp @if libdecnumber - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libdecnumber stage3-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libdecnumber stage2-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libdecnumber ; then \ + cd $(HOST_SUBDIR); mv libdecnumber stage3-libdecnumber ; \ + mv prev-libdecnumber stage2-libdecnumber ; : ; \ fi @endif libdecnumber @if libiberty - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libiberty stage3-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libiberty stage2-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libiberty ; then \ + cd $(HOST_SUBDIR); mv libiberty stage3-libiberty ; \ + mv prev-libiberty stage2-libiberty ; : ; \ fi @endif libiberty @if zlib - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set zlib stage3-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-zlib stage2-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/zlib ; then \ + cd $(HOST_SUBDIR); mv zlib stage3-zlib ; \ + mv prev-zlib stage2-zlib ; : ; \ fi @endif zlib @if test -d $(TARGET_SUBDIR) ; then \ - set $(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-$(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ + mv $(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; \ + mv prev-$(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; : ; \ fi + rm -f stage_current # Bubble a bugfix through all the stages up to stage 3. They are # remade, but not reconfigured. The next stage (if any) will not be # reconfigured as well. .PHONY: stage3-bubble stage3-bubble:: stage2-bubble - @bootstrap_lean@-rm -rf stage1-* ; $(STAMP) stage1-lean @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ if test -f stage3-lean || test -f stage2-lean ; then \ echo Skipping rebuild of stage3 ; \ else \ $(MAKE) stage3-start; \ + if $(LEAN); then \ + rm -rf stage1-* ; \ + $(STAMP) stage1-lean ; \ + fi; \ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage3; \ fi $(MAKE) $(RECURSE_FLAGS_TO_PASS) compare @@ -36408,11 +36307,14 @@ compare: true; \ fi ; \ $(STAMP) compare - @bootstrap_lean@-rm -rf stage2-* ; $(STAMP) stage2-lean + if $(LEAN); then \ + rm -rf stage2-*; \ + $(STAMP) stage2-lean; \ + fi -.PHONY: bootstrap +.PHONY: bootstrap bootstrap-lean bootstrap: echo stage3 > stage_final @r=`${PWD_COMMAND}`; export r; \ @@ -36423,6 +36325,16 @@ bootstrap: s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target +bootstrap-lean: + echo stage3 > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage3-bubble + @: $(MAKE); $(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stage2:: distclean-stage3 @@ -36448,207 +36360,162 @@ stage4-start:: @if bfd @cd $(HOST_SUBDIR); [ -d stage4-bfd ] || \ mkdir stage4-bfd; \ - set stage4-bfd bfd ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-bfd prev-bfd ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-bfd bfd ; \ + mv stage3-bfd prev-bfd || test -f stage3-lean @endif bfd @if opcodes @cd $(HOST_SUBDIR); [ -d stage4-opcodes ] || \ mkdir stage4-opcodes; \ - set stage4-opcodes opcodes ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-opcodes prev-opcodes ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-opcodes opcodes ; \ + mv stage3-opcodes prev-opcodes || test -f stage3-lean @endif opcodes @if binutils @cd $(HOST_SUBDIR); [ -d stage4-binutils ] || \ mkdir stage4-binutils; \ - set stage4-binutils binutils ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-binutils prev-binutils ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-binutils binutils ; \ + mv stage3-binutils prev-binutils || test -f stage3-lean @endif binutils @if gas @cd $(HOST_SUBDIR); [ -d stage4-gas ] || \ mkdir stage4-gas; \ - set stage4-gas gas ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-gas prev-gas ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-gas gas ; \ + mv stage3-gas prev-gas || test -f stage3-lean @endif gas @if gcc @cd $(HOST_SUBDIR); [ -d stage4-gcc ] || \ mkdir stage4-gcc; \ - set stage4-gcc gcc ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-gcc prev-gcc ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-gcc gcc ; \ + mv stage3-gcc prev-gcc || test -f stage3-lean @endif gcc @if intl @cd $(HOST_SUBDIR); [ -d stage4-intl ] || \ mkdir stage4-intl; \ - set stage4-intl intl ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-intl prev-intl ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-intl intl ; \ + mv stage3-intl prev-intl || test -f stage3-lean @endif intl @if ld @cd $(HOST_SUBDIR); [ -d stage4-ld ] || \ mkdir stage4-ld; \ - set stage4-ld ld ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-ld prev-ld ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-ld ld ; \ + mv stage3-ld prev-ld || test -f stage3-lean @endif ld @if libcpp @cd $(HOST_SUBDIR); [ -d stage4-libcpp ] || \ mkdir stage4-libcpp; \ - set stage4-libcpp libcpp ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-libcpp prev-libcpp ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-libcpp libcpp ; \ + mv stage3-libcpp prev-libcpp || test -f stage3-lean @endif libcpp @if libdecnumber @cd $(HOST_SUBDIR); [ -d stage4-libdecnumber ] || \ mkdir stage4-libdecnumber; \ - set stage4-libdecnumber libdecnumber ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-libdecnumber prev-libdecnumber ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-libdecnumber libdecnumber ; \ + mv stage3-libdecnumber prev-libdecnumber || test -f stage3-lean @endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage4-libiberty ] || \ mkdir stage4-libiberty; \ - set stage4-libiberty libiberty ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-libiberty prev-libiberty ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-libiberty libiberty ; \ + mv stage3-libiberty prev-libiberty || test -f stage3-lean @endif libiberty @if zlib @cd $(HOST_SUBDIR); [ -d stage4-zlib ] || \ mkdir stage4-zlib; \ - set stage4-zlib zlib ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-zlib prev-zlib ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-zlib zlib ; \ + mv stage3-zlib prev-zlib || test -f stage3-lean @endif zlib @[ -d stage4-$(TARGET_SUBDIR) ] || \ mkdir stage4-$(TARGET_SUBDIR); \ - set stage4-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage3-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ + mv stage4-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ + mv stage3-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage3-lean -stage4-end:: - @rm -f stage_current +stage4-end:: @if bfd - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set bfd stage4-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-bfd stage3-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/bfd ; then \ + cd $(HOST_SUBDIR); mv bfd stage4-bfd ; \ + mv prev-bfd stage3-bfd ; : ; \ fi @endif bfd @if opcodes - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set opcodes stage4-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-opcodes stage3-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/opcodes ; then \ + cd $(HOST_SUBDIR); mv opcodes stage4-opcodes ; \ + mv prev-opcodes stage3-opcodes ; : ; \ fi @endif opcodes @if binutils - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set binutils stage4-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-binutils stage3-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/binutils ; then \ + cd $(HOST_SUBDIR); mv binutils stage4-binutils ; \ + mv prev-binutils stage3-binutils ; : ; \ fi @endif binutils @if gas - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gas stage4-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gas stage3-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gas ; then \ + cd $(HOST_SUBDIR); mv gas stage4-gas ; \ + mv prev-gas stage3-gas ; : ; \ fi @endif gas @if gcc - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gcc stage4-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gcc stage3-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gcc ; then \ + cd $(HOST_SUBDIR); mv gcc stage4-gcc ; \ + mv prev-gcc stage3-gcc ; : ; \ fi @endif gcc @if intl - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set intl stage4-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-intl stage3-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/intl ; then \ + cd $(HOST_SUBDIR); mv intl stage4-intl ; \ + mv prev-intl stage3-intl ; : ; \ fi @endif intl @if ld - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set ld stage4-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-ld stage3-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/ld ; then \ + cd $(HOST_SUBDIR); mv ld stage4-ld ; \ + mv prev-ld stage3-ld ; : ; \ fi @endif ld @if libcpp - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libcpp stage4-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libcpp stage3-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libcpp ; then \ + cd $(HOST_SUBDIR); mv libcpp stage4-libcpp ; \ + mv prev-libcpp stage3-libcpp ; : ; \ fi @endif libcpp @if libdecnumber - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libdecnumber stage4-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libdecnumber stage3-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libdecnumber ; then \ + cd $(HOST_SUBDIR); mv libdecnumber stage4-libdecnumber ; \ + mv prev-libdecnumber stage3-libdecnumber ; : ; \ fi @endif libdecnumber @if libiberty - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libiberty stage4-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libiberty stage3-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libiberty ; then \ + cd $(HOST_SUBDIR); mv libiberty stage4-libiberty ; \ + mv prev-libiberty stage3-libiberty ; : ; \ fi @endif libiberty @if zlib - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set zlib stage4-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-zlib stage3-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/zlib ; then \ + cd $(HOST_SUBDIR); mv zlib stage4-zlib ; \ + mv prev-zlib stage3-zlib ; : ; \ fi @endif zlib @if test -d $(TARGET_SUBDIR) ; then \ - set $(TARGET_SUBDIR) stage4-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-$(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ + mv $(TARGET_SUBDIR) stage4-$(TARGET_SUBDIR) ; \ + mv prev-$(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; : ; \ fi + rm -f stage_current # Bubble a bugfix through all the stages up to stage 4. They are # remade, but not reconfigured. The next stage (if any) will not be # reconfigured as well. .PHONY: stage4-bubble stage4-bubble:: stage3-bubble - @bootstrap_lean@-rm -rf stage2-* ; $(STAMP) stage2-lean @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ if test -f stage4-lean || test -f stage3-lean ; then \ echo Skipping rebuild of stage4 ; \ else \ $(MAKE) stage4-start; \ + if $(LEAN); then \ + rm -rf stage2-* ; \ + $(STAMP) stage2-lean ; \ + fi; \ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage4; \ fi $(MAKE) $(RECURSE_FLAGS_TO_PASS) compare3 @@ -36692,11 +36559,14 @@ compare3: true; \ fi ; \ $(STAMP) compare3 - @bootstrap_lean@-rm -rf stage3-* ; $(STAMP) stage3-lean + if $(LEAN); then \ + rm -rf stage3-*; \ + $(STAMP) stage3-lean; \ + fi -.PHONY: bootstrap4 +.PHONY: bootstrap4 bootstrap4-lean bootstrap4: echo stage4 > stage_final @r=`${PWD_COMMAND}`; export r; \ @@ -36707,6 +36577,16 @@ bootstrap4: s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target +bootstrap4-lean: + echo stage4 > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage4-bubble + @: $(MAKE); $(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stage3:: distclean-stage4 @@ -36729,194 +36609,146 @@ stageprofile-start:: @if bfd @cd $(HOST_SUBDIR); [ -d stageprofile-bfd ] || \ mkdir stageprofile-bfd; \ - set stageprofile-bfd bfd ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-bfd prev-bfd ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-bfd bfd ; \ + mv stage1-bfd prev-bfd || test -f stage1-lean @endif bfd @if opcodes @cd $(HOST_SUBDIR); [ -d stageprofile-opcodes ] || \ mkdir stageprofile-opcodes; \ - set stageprofile-opcodes opcodes ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-opcodes prev-opcodes ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-opcodes opcodes ; \ + mv stage1-opcodes prev-opcodes || test -f stage1-lean @endif opcodes @if binutils @cd $(HOST_SUBDIR); [ -d stageprofile-binutils ] || \ mkdir stageprofile-binutils; \ - set stageprofile-binutils binutils ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-binutils prev-binutils ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-binutils binutils ; \ + mv stage1-binutils prev-binutils || test -f stage1-lean @endif binutils @if gas @cd $(HOST_SUBDIR); [ -d stageprofile-gas ] || \ mkdir stageprofile-gas; \ - set stageprofile-gas gas ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-gas prev-gas ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-gas gas ; \ + mv stage1-gas prev-gas || test -f stage1-lean @endif gas @if gcc @cd $(HOST_SUBDIR); [ -d stageprofile-gcc ] || \ mkdir stageprofile-gcc; \ - set stageprofile-gcc gcc ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-gcc prev-gcc ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-gcc gcc ; \ + mv stage1-gcc prev-gcc || test -f stage1-lean @endif gcc @if intl @cd $(HOST_SUBDIR); [ -d stageprofile-intl ] || \ mkdir stageprofile-intl; \ - set stageprofile-intl intl ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-intl prev-intl ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-intl intl ; \ + mv stage1-intl prev-intl || test -f stage1-lean @endif intl @if ld @cd $(HOST_SUBDIR); [ -d stageprofile-ld ] || \ mkdir stageprofile-ld; \ - set stageprofile-ld ld ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-ld prev-ld ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-ld ld ; \ + mv stage1-ld prev-ld || test -f stage1-lean @endif ld @if libcpp @cd $(HOST_SUBDIR); [ -d stageprofile-libcpp ] || \ mkdir stageprofile-libcpp; \ - set stageprofile-libcpp libcpp ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-libcpp prev-libcpp ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-libcpp libcpp ; \ + mv stage1-libcpp prev-libcpp || test -f stage1-lean @endif libcpp @if libdecnumber @cd $(HOST_SUBDIR); [ -d stageprofile-libdecnumber ] || \ mkdir stageprofile-libdecnumber; \ - set stageprofile-libdecnumber libdecnumber ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-libdecnumber prev-libdecnumber ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-libdecnumber libdecnumber ; \ + mv stage1-libdecnumber prev-libdecnumber || test -f stage1-lean @endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stageprofile-libiberty ] || \ mkdir stageprofile-libiberty; \ - set stageprofile-libiberty libiberty ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-libiberty prev-libiberty ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-libiberty libiberty ; \ + mv stage1-libiberty prev-libiberty || test -f stage1-lean @endif libiberty @if zlib @cd $(HOST_SUBDIR); [ -d stageprofile-zlib ] || \ mkdir stageprofile-zlib; \ - set stageprofile-zlib zlib ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-zlib prev-zlib ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-zlib zlib ; \ + mv stage1-zlib prev-zlib || test -f stage1-lean @endif zlib @[ -d stageprofile-$(TARGET_SUBDIR) ] || \ mkdir stageprofile-$(TARGET_SUBDIR); \ - set stageprofile-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ + mv stageprofile-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ + mv stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage1-lean -stageprofile-end:: - @rm -f stage_current +stageprofile-end:: @if bfd - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set bfd stageprofile-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-bfd stage1-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/bfd ; then \ + cd $(HOST_SUBDIR); mv bfd stageprofile-bfd ; \ + mv prev-bfd stage1-bfd ; : ; \ fi @endif bfd @if opcodes - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set opcodes stageprofile-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-opcodes stage1-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/opcodes ; then \ + cd $(HOST_SUBDIR); mv opcodes stageprofile-opcodes ; \ + mv prev-opcodes stage1-opcodes ; : ; \ fi @endif opcodes @if binutils - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set binutils stageprofile-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-binutils stage1-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/binutils ; then \ + cd $(HOST_SUBDIR); mv binutils stageprofile-binutils ; \ + mv prev-binutils stage1-binutils ; : ; \ fi @endif binutils @if gas - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gas stageprofile-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gas stage1-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gas ; then \ + cd $(HOST_SUBDIR); mv gas stageprofile-gas ; \ + mv prev-gas stage1-gas ; : ; \ fi @endif gas @if gcc - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gcc stageprofile-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gcc stage1-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gcc ; then \ + cd $(HOST_SUBDIR); mv gcc stageprofile-gcc ; \ + mv prev-gcc stage1-gcc ; : ; \ fi @endif gcc @if intl - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set intl stageprofile-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-intl stage1-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/intl ; then \ + cd $(HOST_SUBDIR); mv intl stageprofile-intl ; \ + mv prev-intl stage1-intl ; : ; \ fi @endif intl @if ld - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set ld stageprofile-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-ld stage1-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/ld ; then \ + cd $(HOST_SUBDIR); mv ld stageprofile-ld ; \ + mv prev-ld stage1-ld ; : ; \ fi @endif ld @if libcpp - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libcpp stageprofile-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libcpp stage1-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libcpp ; then \ + cd $(HOST_SUBDIR); mv libcpp stageprofile-libcpp ; \ + mv prev-libcpp stage1-libcpp ; : ; \ fi @endif libcpp @if libdecnumber - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libdecnumber stageprofile-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libdecnumber stage1-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libdecnumber ; then \ + cd $(HOST_SUBDIR); mv libdecnumber stageprofile-libdecnumber ; \ + mv prev-libdecnumber stage1-libdecnumber ; : ; \ fi @endif libdecnumber @if libiberty - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libiberty stageprofile-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libiberty stage1-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libiberty ; then \ + cd $(HOST_SUBDIR); mv libiberty stageprofile-libiberty ; \ + mv prev-libiberty stage1-libiberty ; : ; \ fi @endif libiberty @if zlib - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set zlib stageprofile-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-zlib stage1-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/zlib ; then \ + cd $(HOST_SUBDIR); mv zlib stageprofile-zlib ; \ + mv prev-zlib stage1-zlib ; : ; \ fi @endif zlib @if test -d $(TARGET_SUBDIR) ; then \ - set $(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ + mv $(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; \ + mv prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; : ; \ fi + rm -f stage_current # Bubble a bugfix through all the stages up to stage profile. They are # remade, but not reconfigured. The next stage (if any) will not be @@ -36963,194 +36795,146 @@ stagefeedback-start:: @if bfd @cd $(HOST_SUBDIR); [ -d stagefeedback-bfd ] || \ mkdir stagefeedback-bfd; \ - set stagefeedback-bfd bfd ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-bfd prev-bfd ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-bfd bfd ; \ + mv stageprofile-bfd prev-bfd || test -f stageprofile-lean @endif bfd @if opcodes @cd $(HOST_SUBDIR); [ -d stagefeedback-opcodes ] || \ mkdir stagefeedback-opcodes; \ - set stagefeedback-opcodes opcodes ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-opcodes prev-opcodes ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-opcodes opcodes ; \ + mv stageprofile-opcodes prev-opcodes || test -f stageprofile-lean @endif opcodes @if binutils @cd $(HOST_SUBDIR); [ -d stagefeedback-binutils ] || \ mkdir stagefeedback-binutils; \ - set stagefeedback-binutils binutils ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-binutils prev-binutils ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-binutils binutils ; \ + mv stageprofile-binutils prev-binutils || test -f stageprofile-lean @endif binutils @if gas @cd $(HOST_SUBDIR); [ -d stagefeedback-gas ] || \ mkdir stagefeedback-gas; \ - set stagefeedback-gas gas ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-gas prev-gas ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-gas gas ; \ + mv stageprofile-gas prev-gas || test -f stageprofile-lean @endif gas @if gcc @cd $(HOST_SUBDIR); [ -d stagefeedback-gcc ] || \ mkdir stagefeedback-gcc; \ - set stagefeedback-gcc gcc ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-gcc prev-gcc ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-gcc gcc ; \ + mv stageprofile-gcc prev-gcc || test -f stageprofile-lean @endif gcc @if intl @cd $(HOST_SUBDIR); [ -d stagefeedback-intl ] || \ mkdir stagefeedback-intl; \ - set stagefeedback-intl intl ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-intl prev-intl ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-intl intl ; \ + mv stageprofile-intl prev-intl || test -f stageprofile-lean @endif intl @if ld @cd $(HOST_SUBDIR); [ -d stagefeedback-ld ] || \ mkdir stagefeedback-ld; \ - set stagefeedback-ld ld ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-ld prev-ld ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-ld ld ; \ + mv stageprofile-ld prev-ld || test -f stageprofile-lean @endif ld @if libcpp @cd $(HOST_SUBDIR); [ -d stagefeedback-libcpp ] || \ mkdir stagefeedback-libcpp; \ - set stagefeedback-libcpp libcpp ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-libcpp prev-libcpp ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-libcpp libcpp ; \ + mv stageprofile-libcpp prev-libcpp || test -f stageprofile-lean @endif libcpp @if libdecnumber @cd $(HOST_SUBDIR); [ -d stagefeedback-libdecnumber ] || \ mkdir stagefeedback-libdecnumber; \ - set stagefeedback-libdecnumber libdecnumber ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-libdecnumber prev-libdecnumber ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-libdecnumber libdecnumber ; \ + mv stageprofile-libdecnumber prev-libdecnumber || test -f stageprofile-lean @endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stagefeedback-libiberty ] || \ mkdir stagefeedback-libiberty; \ - set stagefeedback-libiberty libiberty ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-libiberty prev-libiberty ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-libiberty libiberty ; \ + mv stageprofile-libiberty prev-libiberty || test -f stageprofile-lean @endif libiberty @if zlib @cd $(HOST_SUBDIR); [ -d stagefeedback-zlib ] || \ mkdir stagefeedback-zlib; \ - set stagefeedback-zlib zlib ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-zlib prev-zlib ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-zlib zlib ; \ + mv stageprofile-zlib prev-zlib || test -f stageprofile-lean @endif zlib @[ -d stagefeedback-$(TARGET_SUBDIR) ] || \ mkdir stagefeedback-$(TARGET_SUBDIR); \ - set stagefeedback-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ ; \ - set stageprofile-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ + mv stagefeedback-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ + mv stageprofile-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stageprofile-lean -stagefeedback-end:: - @rm -f stage_current +stagefeedback-end:: @if bfd - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set bfd stagefeedback-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-bfd stageprofile-bfd ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/bfd ; then \ + cd $(HOST_SUBDIR); mv bfd stagefeedback-bfd ; \ + mv prev-bfd stageprofile-bfd ; : ; \ fi @endif bfd @if opcodes - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set opcodes stagefeedback-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-opcodes stageprofile-opcodes ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/opcodes ; then \ + cd $(HOST_SUBDIR); mv opcodes stagefeedback-opcodes ; \ + mv prev-opcodes stageprofile-opcodes ; : ; \ fi @endif opcodes @if binutils - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set binutils stagefeedback-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-binutils stageprofile-binutils ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/binutils ; then \ + cd $(HOST_SUBDIR); mv binutils stagefeedback-binutils ; \ + mv prev-binutils stageprofile-binutils ; : ; \ fi @endif binutils @if gas - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gas stagefeedback-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gas stageprofile-gas ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gas ; then \ + cd $(HOST_SUBDIR); mv gas stagefeedback-gas ; \ + mv prev-gas stageprofile-gas ; : ; \ fi @endif gas @if gcc - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set gcc stagefeedback-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-gcc stageprofile-gcc ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/gcc ; then \ + cd $(HOST_SUBDIR); mv gcc stagefeedback-gcc ; \ + mv prev-gcc stageprofile-gcc ; : ; \ fi @endif gcc @if intl - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set intl stagefeedback-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-intl stageprofile-intl ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/intl ; then \ + cd $(HOST_SUBDIR); mv intl stagefeedback-intl ; \ + mv prev-intl stageprofile-intl ; : ; \ fi @endif intl @if ld - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set ld stagefeedback-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-ld stageprofile-ld ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/ld ; then \ + cd $(HOST_SUBDIR); mv ld stagefeedback-ld ; \ + mv prev-ld stageprofile-ld ; : ; \ fi @endif ld @if libcpp - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libcpp stagefeedback-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libcpp stageprofile-libcpp ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libcpp ; then \ + cd $(HOST_SUBDIR); mv libcpp stagefeedback-libcpp ; \ + mv prev-libcpp stageprofile-libcpp ; : ; \ fi @endif libcpp @if libdecnumber - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libdecnumber stagefeedback-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libdecnumber stageprofile-libdecnumber ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libdecnumber ; then \ + cd $(HOST_SUBDIR); mv libdecnumber stagefeedback-libdecnumber ; \ + mv prev-libdecnumber stageprofile-libdecnumber ; : ; \ fi @endif libdecnumber @if libiberty - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set libiberty stagefeedback-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-libiberty stageprofile-libiberty ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/libiberty ; then \ + cd $(HOST_SUBDIR); mv libiberty stagefeedback-libiberty ; \ + mv prev-libiberty stageprofile-libiberty ; : ; \ fi @endif libiberty @if zlib - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set zlib stagefeedback-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-zlib stageprofile-zlib ; \ - @UNDO_LINK_TO_DIR@ ; \ + @if test -d $(HOST_SUBDIR)/zlib ; then \ + cd $(HOST_SUBDIR); mv zlib stagefeedback-zlib ; \ + mv prev-zlib stageprofile-zlib ; : ; \ fi @endif zlib @if test -d $(TARGET_SUBDIR) ; then \ - set $(TARGET_SUBDIR) stagefeedback-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ - set prev-$(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ ; \ + mv $(TARGET_SUBDIR) stagefeedback-$(TARGET_SUBDIR) ; \ + mv prev-$(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; : ; \ fi + rm -f stage_current # Bubble a bugfix through all the stages up to stage feedback. They are # remade, but not reconfigured. The next stage (if any) will not be @@ -37175,7 +36959,7 @@ do-clean: clean-stagefeedback -.PHONY: profiledbootstrap +.PHONY: profiledbootstrap profiledbootstrap-lean profiledbootstrap: echo stagefeedback > stage_final @r=`${PWD_COMMAND}`; export r; \ @@ -37186,6 +36970,16 @@ profiledbootstrap: s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target +profiledbootstrap-lean: + echo stagefeedback > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stagefeedback-bubble + @: $(MAKE); $(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stageprofile:: distclean-stagefeedback diff --git a/Makefile.tpl b/Makefile.tpl index 8b5b679cccc..afeaef52fd0 100644 --- a/Makefile.tpl +++ b/Makefile.tpl @@ -6,7 +6,7 @@ in # # Makefile for directory with subdirs to build. # Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, -# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation +# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -285,6 +285,7 @@ DLLTOOL = @DLLTOOL@ LD = @LD@ LIPO = @LIPO@ NM = @NM@ +OBJDUMP = @OBJDUMP@ RANLIB = @RANLIB@ STRIP = @STRIP@ WINDRES = @WINDRES@ @@ -407,6 +408,7 @@ EXTRA_HOST_FLAGS = \ 'LD=$(LD)' \ 'LIPO=$(LIPO)' \ 'NM=$(NM)' \ + 'OBJDUMP=$(OBJDUMP)' \ 'RANLIB=$(RANLIB)' \ 'STRIP=$(STRIP)' \ 'WINDRES=$(WINDRES)' @@ -464,8 +466,6 @@ EXTRA_GCC_FLAGS = \ "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ - "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ - "`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ "`echo 'BOOT_ADAFLAGS=$(BOOT_ADAFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS) @@ -1222,6 +1222,9 @@ unstage: stage: @: $(MAKE); $(stage) +# Disable commands for lean bootstrap. +LEAN = false + # We name the build directories for the various stages "stage1-gcc", # "stage2-gcc","stage3-gcc", etc. @@ -1277,48 +1280,43 @@ stage[+id+]-start:: @if [+ module +] @cd $(HOST_SUBDIR); [ -d stage[+id+]-[+module+] ] || \ mkdir stage[+id+]-[+module+]; \ - set stage[+id+]-[+module+] [+module+] ; \ - @CREATE_LINK_TO_DIR@ [+ IF prev +] ; \ - set stage[+prev+]-[+module+] prev-[+module+] ; \ - @CREATE_LINK_TO_DIR@ [+ ENDIF prev +] + mv stage[+id+]-[+module+] [+module+] [+ IF prev +] ; \ + mv stage[+prev+]-[+module+] prev-[+module+] || test -f stage[+prev+]-lean [+ ENDIF prev +] @endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +] @[ -d stage[+id+]-$(TARGET_SUBDIR) ] || \ mkdir stage[+id+]-$(TARGET_SUBDIR); \ - set stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ [+ IF prev +] ; \ - set stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \ - @CREATE_LINK_TO_DIR@ [+ ENDIF prev +] + mv stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) [+ IF prev +] ; \ + mv stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage[+prev+]-lean [+ ENDIF prev +] -stage[+id+]-end:: - @rm -f stage_current[+ FOR host_modules +][+ IF bootstrap +] +stage[+id+]-end:: [+ FOR host_modules +][+ IF bootstrap +] @if [+ module +] - @if test -d $(HOST_SUBDIR) ; then \ - cd $(HOST_SUBDIR); set [+module+] stage[+id+]-[+module+] ; \ - @UNDO_LINK_TO_DIR@ [+ IF prev +] ; \ - set prev-[+module+] stage[+prev+]-[+module+] ; \ - @UNDO_LINK_TO_DIR@ [+ ENDIF prev +] ; \ + @if test -d $(HOST_SUBDIR)/[+module+] ; then \ + cd $(HOST_SUBDIR); mv [+module+] stage[+id+]-[+module+] [+ IF prev +]; \ + mv prev-[+module+] stage[+prev+]-[+module+] ; : [+ ENDIF prev +] ; \ fi @endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +] @if test -d $(TARGET_SUBDIR) ; then \ - set $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ [+ IF prev +] ; \ - set prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; \ - @UNDO_LINK_TO_DIR@ [+ ENDIF prev +] ; \ + mv $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) [+ IF prev +] ; \ + mv prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; : [+ ENDIF prev +] ; \ fi + rm -f stage_current # Bubble a bugfix through all the stages up to stage [+id+]. They are # remade, but not reconfigured. The next stage (if any) will not be # reconfigured as well. .PHONY: stage[+id+]-bubble -stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +][+IF lean +] - @bootstrap_lean@-rm -rf stage[+lean+]-* ; $(STAMP) stage[+lean+]-lean[+ ENDIF lean +] +stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +] @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ if test -f stage[+id+]-lean [+ IF prev +]|| test -f stage[+prev+]-lean [+ ENDIF prev +] ; then \ echo Skipping rebuild of stage[+id+] ; \ else \ - $(MAKE) stage[+id+]-start; \ + $(MAKE) stage[+id+]-start; \[+IF lean +] + if $(LEAN); then \ + rm -rf stage[+lean+]-* ; \ + $(STAMP) stage[+lean+]-lean ; \ + fi; \[+ ENDIF lean +] $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \ fi[+ IF compare-target +] $(MAKE) $(RECURSE_FLAGS_TO_PASS) [+compare-target+][+ ENDIF compare-target +] @@ -1362,11 +1360,14 @@ do-clean: clean-stage[+id+] true; \ fi ; \ $(STAMP) [+compare-target+][+ IF prev +] - @bootstrap_lean@-rm -rf stage[+prev+]-* ; $(STAMP) stage[+prev+]-lean[+ ENDIF prev +] + if $(LEAN); then \ + rm -rf stage[+prev+]-*; \ + $(STAMP) stage[+prev+]-lean; \ + fi[+ ENDIF prev +] [+ ENDIF compare-target +] [+ IF bootstrap-target +] -.PHONY: [+bootstrap-target+] +.PHONY: [+bootstrap-target+] [+bootstrap-target+]-lean [+bootstrap-target+]: echo stage[+id+] > stage_final @r=`${PWD_COMMAND}`; export r; \ @@ -1376,6 +1377,16 @@ do-clean: clean-stage[+id+] @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + +[+bootstrap-target+]-lean: + echo stage[+id+] > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage[+id+]-bubble + @: $(MAKE); $(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target [+ ENDIF bootstrap-target +] # Rules to wipe a stage and all the following ones, also used for cleanstrap diff --git a/configure b/configure index cadb668dd79..cf1560b14d1 100755 --- a/configure +++ b/configure @@ -27,7 +27,7 @@ ac_help="$ac_help --with-build-sysroot=sysroot use sysroot as the system root during the build" ac_help="$ac_help - --enable-bootstrap[=lean] Enable bootstrapping [no]" + --enable-bootstrap Enable bootstrapping [yes if native build]" ac_help="$ac_help --enable-serial-[{host,target,build}-]configure Force sequential configuration of @@ -2967,17 +2967,17 @@ case "$have_compiler:$host:$target:$enable_bootstrap" in enable_bootstrap=no ;; # We have a compiler and we are in a native configuration, bootstrap is ok - yes:$build:$build:yes | yes:$build:$build:lean) + yes:$build:$build:yes) ;; # Other configurations, but we have a compiler. Assume the user knows # what he's doing. - yes:*:*:yes | yes:*:*:lean) + yes:*:*:yes) echo "configure: warning: trying to bootstrap a cross compiler" 1>&2 ;; # No compiler: if they passed --enable-bootstrap explicitly, fail - no:*:*:yes | no:*:*:lean) + no:*:*:yes) { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;; # Fail if wrong command line @@ -2989,16 +2989,11 @@ esac # Adjust the toplevel makefile according to whether bootstrap was selected. case "$enable_bootstrap" in yes) - bootstrap_lean='#' - bootstrap_suffix=bootstrap ;; - lean) - bootstrap_lean='' bootstrap_suffix=bootstrap ;; no) bootstrap_suffix=no-bootstrap ;; esac - for module in ${build_configdirs} ; do if test -z "${no_recursion}" \ && test -f ${build_subdir}/${module}/Makefile; then @@ -3317,7 +3312,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3318: checking for $ac_word" >&5 +echo "configure:3316: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3357,7 +3352,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3358: checking for $ac_word" >&5 +echo "configure:3356: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3396,7 +3391,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3397: checking for $ac_word" >&5 +echo "configure:3395: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3435,7 +3430,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3436: checking for $ac_word" >&5 +echo "configure:3434: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3475,7 +3470,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3476: checking for $ac_word" >&5 +echo "configure:3474: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3514,7 +3509,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3515: checking for $ac_word" >&5 +echo "configure:3513: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3567,7 +3562,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3568: checking for $ac_word" >&5 +echo "configure:3566: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3608,7 +3603,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3609: checking for $ac_word" >&5 +echo "configure:3607: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3656,7 +3651,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3657: checking for $ac_word" >&5 +echo "configure:3655: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3687,7 +3682,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3688: checking for $ac_word" >&5 +echo "configure:3686: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3731,7 +3726,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3732: checking for $ac_word" >&5 +echo "configure:3730: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3762,7 +3757,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3763: checking for $ac_word" >&5 +echo "configure:3761: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3806,7 +3801,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3807: checking for $ac_word" >&5 +echo "configure:3805: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3837,7 +3832,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3838: checking for $ac_word" >&5 +echo "configure:3836: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3881,7 +3876,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3882: checking for $ac_word" >&5 +echo "configure:3880: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3912,7 +3907,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3913: checking for $ac_word" >&5 +echo "configure:3911: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3956,7 +3951,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3957: checking for $ac_word" >&5 +echo "configure:3955: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3987,7 +3982,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3988: checking for $ac_word" >&5 +echo "configure:3986: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4031,7 +4026,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4032: checking for $ac_word" >&5 +echo "configure:4030: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4062,7 +4057,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4063: checking for $ac_word" >&5 +echo "configure:4061: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4106,7 +4101,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4107: checking for $ac_word" >&5 +echo "configure:4105: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4137,7 +4132,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4138: checking for $ac_word" >&5 +echo "configure:4136: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4176,7 +4171,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4177: checking for $ac_word" >&5 +echo "configure:4175: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4207,7 +4202,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4208: checking for $ac_word" >&5 +echo "configure:4206: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4246,7 +4241,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4247: checking for $ac_word" >&5 +echo "configure:4245: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4277,7 +4272,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4278: checking for $ac_word" >&5 +echo "configure:4276: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4321,7 +4316,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4322: checking for $ac_word" >&5 +echo "configure:4320: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4352,7 +4347,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4353: checking for $ac_word" >&5 +echo "configure:4351: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4396,7 +4391,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4397: checking for $ac_word" >&5 +echo "configure:4395: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4427,7 +4422,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4428: checking for $ac_word" >&5 +echo "configure:4426: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4478,7 +4473,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4479: checking for $ac_word" >&5 +echo "configure:4477: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4509,7 +4504,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4510: checking for $ac_word" >&5 +echo "configure:4508: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4553,7 +4548,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4554: checking for $ac_word" >&5 +echo "configure:4552: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4584,7 +4579,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4585: checking for $ac_word" >&5 +echo "configure:4583: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4628,7 +4623,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4629: checking for $ac_word" >&5 +echo "configure:4627: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4659,7 +4654,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4660: checking for $ac_word" >&5 +echo "configure:4658: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4703,7 +4698,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4704: checking for $ac_word" >&5 +echo "configure:4702: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4734,7 +4729,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4735: checking for $ac_word" >&5 +echo "configure:4733: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4778,7 +4773,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4779: checking for $ac_word" >&5 +echo "configure:4777: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4809,7 +4804,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4810: checking for $ac_word" >&5 +echo "configure:4808: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4853,7 +4848,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4854: checking for $ac_word" >&5 +echo "configure:4852: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4884,7 +4879,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4885: checking for $ac_word" >&5 +echo "configure:4883: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4923,7 +4918,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4924: checking for $ac_word" >&5 +echo "configure:4922: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4954,7 +4949,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4955: checking for $ac_word" >&5 +echo "configure:4953: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4998,7 +4993,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4999: checking for $ac_word" >&5 +echo "configure:4997: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5029,7 +5024,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5030: checking for $ac_word" >&5 +echo "configure:5028: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5073,7 +5068,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5074: checking for $ac_word" >&5 +echo "configure:5072: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5104,7 +5099,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5105: checking for $ac_word" >&5 +echo "configure:5103: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5148,7 +5143,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5149: checking for $ac_word" >&5 +echo "configure:5147: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5179,7 +5174,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5180: checking for $ac_word" >&5 +echo "configure:5178: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5223,7 +5218,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5224: checking for $ac_word" >&5 +echo "configure:5222: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5254,7 +5249,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5255: checking for $ac_word" >&5 +echo "configure:5253: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5298,7 +5293,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5299: checking for $ac_word" >&5 +echo "configure:5297: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5329,7 +5324,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5330: checking for $ac_word" >&5 +echo "configure:5328: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5373,7 +5368,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5374: checking for $ac_word" >&5 +echo "configure:5372: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5404,7 +5399,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5405: checking for $ac_word" >&5 +echo "configure:5403: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5443,7 +5438,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5444: checking for $ac_word" >&5 +echo "configure:5442: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5474,7 +5469,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5475: checking for $ac_word" >&5 +echo "configure:5473: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5518,7 +5513,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5519: checking for $ac_word" >&5 +echo "configure:5517: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5549,7 +5544,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5550: checking for $ac_word" >&5 +echo "configure:5548: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5592,7 +5587,7 @@ fi RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET" echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6 -echo "configure:5593: checking where to find the target ar" >&5 +echo "configure:5591: checking where to find the target ar" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5617,7 +5612,7 @@ else fi fi echo $ac_n "checking where to find the target as""... $ac_c" 1>&6 -echo "configure:5618: checking where to find the target as" >&5 +echo "configure:5616: checking where to find the target as" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5642,7 +5637,7 @@ else fi fi echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6 -echo "configure:5643: checking where to find the target cc" >&5 +echo "configure:5641: checking where to find the target cc" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5667,7 +5662,7 @@ else fi fi echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6 -echo "configure:5668: checking where to find the target c++" >&5 +echo "configure:5666: checking where to find the target c++" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5695,7 +5690,7 @@ else fi fi echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6 -echo "configure:5696: checking where to find the target c++ for libstdc++" >&5 +echo "configure:5694: checking where to find the target c++ for libstdc++" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5723,7 +5718,7 @@ else fi fi echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6 -echo "configure:5724: checking where to find the target dlltool" >&5 +echo "configure:5722: checking where to find the target dlltool" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5748,7 +5743,7 @@ else fi fi echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6 -echo "configure:5749: checking where to find the target gcc" >&5 +echo "configure:5747: checking where to find the target gcc" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5773,7 +5768,7 @@ else fi fi echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6 -echo "configure:5774: checking where to find the target gcj" >&5 +echo "configure:5772: checking where to find the target gcj" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5801,7 +5796,7 @@ else fi fi echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6 -echo "configure:5802: checking where to find the target gfortran" >&5 +echo "configure:5800: checking where to find the target gfortran" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5829,7 +5824,7 @@ else fi fi echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6 -echo "configure:5830: checking where to find the target ld" >&5 +echo "configure:5828: checking where to find the target ld" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5854,7 +5849,7 @@ else fi fi echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6 -echo "configure:5855: checking where to find the target lipo" >&5 +echo "configure:5853: checking where to find the target lipo" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5869,7 +5864,7 @@ else fi fi echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6 -echo "configure:5870: checking where to find the target nm" >&5 +echo "configure:5868: checking where to find the target nm" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5894,7 +5889,7 @@ else fi fi echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6 -echo "configure:5895: checking where to find the target objdump" >&5 +echo "configure:5893: checking where to find the target objdump" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5919,7 +5914,7 @@ else fi fi echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6 -echo "configure:5920: checking where to find the target ranlib" >&5 +echo "configure:5918: checking where to find the target ranlib" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5944,7 +5939,7 @@ else fi fi echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6 -echo "configure:5945: checking where to find the target strip" >&5 +echo "configure:5943: checking where to find the target strip" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -5969,7 +5964,7 @@ else fi fi echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6 -echo "configure:5970: checking where to find the target windres" >&5 +echo "configure:5968: checking where to find the target windres" >&5 if test "x${build}" != "x${host}" ; then # Canadian cross, just use what we found echo "$ac_t""pre-installed" 1>&6 @@ -6022,7 +6017,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:6023: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:6021: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -6065,42 +6060,6 @@ case $build in esac -# It makes debugging easier if we create as symlinks the stage directories -# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not -# possible, however, we can resort to mv. -echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6 -echo "configure:6070: checking if symbolic links between directories work" >&5 -if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "${LN_S}" = "ln -s" \ - && mkdir confdir.s1 \ - && ln -s confdir.s1 confdir.s2 \ - && echo timestamp1 > confdir.s1/conftest.1 \ - && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \ - && echo timestamp2 > confdir.s2/conftest.2 \ - && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \ - && rm -f confdir.s2; then - gcc_cv_prog_ln_s_dir=yes -else - gcc_cv_prog_ln_s_dir=no -fi -rm -rf confdir.s1 confdir.s2 -fi - -echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6 - -case ${gcc_cv_prog_ln_s_dir} in - yes) - CREATE_LINK_TO_DIR='ln -s $$1 $$2' - UNDO_LINK_TO_DIR='rm -f $$1' ;; - *) - CREATE_LINK_TO_DIR='mv $$1 $$2' - UNDO_LINK_TO_DIR='mv $$1 $$2' ;; -esac - - - # Enable -Werror in bootstrap stage2 and later. # Change the default to "no" on release branches. # Check whether --enable-werror or --disable-werror was given. @@ -6293,7 +6252,6 @@ s%@gmplibs@%$gmplibs%g s%@gmpinc@%$gmpinc%g s%@stage1_languages@%$stage1_languages%g s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g -s%@bootstrap_lean@%$bootstrap_lean%g /@serialization_dependencies@/r $serialization_dependencies s%@serialization_dependencies@%%g /@host_makefile_frag@/r $host_makefile_frag @@ -6365,8 +6323,6 @@ s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g s%@stage1_cflags@%$stage1_cflags%g -s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g -s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g s%@stage2_werror_flag@%$stage2_werror_flag%g CEOF diff --git a/configure.in b/configure.in index c3ef95b9ec2..b2e841437be 100644 --- a/configure.in +++ b/configure.in @@ -1,5 +1,5 @@ -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, -# 1999, 2000, 2001, 2002, 2003, 2004, 2006 Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -1736,7 +1736,7 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g` # not to nest @if/@endif pairs, because configure will not warn you at all. AC_ARG_ENABLE([bootstrap], -[ --enable-bootstrap[=lean] Enable bootstrapping [no]],, +[ --enable-bootstrap Enable bootstrapping [yes if native build]],, enable_bootstrap=default) # Issue errors and warnings for invalid/strange bootstrap combinations. @@ -1757,17 +1757,17 @@ case "$have_compiler:$host:$target:$enable_bootstrap" in enable_bootstrap=no ;; # We have a compiler and we are in a native configuration, bootstrap is ok - yes:$build:$build:yes | yes:$build:$build:lean) + yes:$build:$build:yes) ;; # Other configurations, but we have a compiler. Assume the user knows # what he's doing. - yes:*:*:yes | yes:*:*:lean) + yes:*:*:yes) AC_MSG_WARN([trying to bootstrap a cross compiler]) ;; # No compiler: if they passed --enable-bootstrap explicitly, fail - no:*:*:yes | no:*:*:lean) + no:*:*:yes) AC_MSG_ERROR([cannot bootstrap without a compiler]) ;; # Fail if wrong command line @@ -1779,15 +1779,10 @@ esac # Adjust the toplevel makefile according to whether bootstrap was selected. case "$enable_bootstrap" in yes) - bootstrap_lean='#' - bootstrap_suffix=bootstrap ;; - lean) - bootstrap_lean='' bootstrap_suffix=bootstrap ;; no) bootstrap_suffix=no-bootstrap ;; esac -AC_SUBST(bootstrap_lean) for module in ${build_configdirs} ; do if test -z "${no_recursion}" \ @@ -2290,36 +2285,6 @@ case $build in esac AC_SUBST(stage1_cflags) -# It makes debugging easier if we create as symlinks the stage directories -# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not -# possible, however, we can resort to mv. -AC_CACHE_CHECK([if symbolic links between directories work], -[gcc_cv_prog_ln_s_dir], -[if test "${LN_S}" = "ln -s" \ - && mkdir confdir.s1 \ - && ln -s confdir.s1 confdir.s2 \ - && echo timestamp1 > confdir.s1/conftest.1 \ - && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \ - && echo timestamp2 > confdir.s2/conftest.2 \ - && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \ - && rm -f confdir.s2; then - gcc_cv_prog_ln_s_dir=yes -else - gcc_cv_prog_ln_s_dir=no -fi -rm -rf confdir.s1 confdir.s2]) - -case ${gcc_cv_prog_ln_s_dir} in - yes) - CREATE_LINK_TO_DIR='ln -s $$1 $$2' - UNDO_LINK_TO_DIR='rm -f $$1' ;; - *) - CREATE_LINK_TO_DIR='mv $$1 $$2' - UNDO_LINK_TO_DIR='mv $$1 $$2' ;; -esac -AC_SUBST(CREATE_LINK_TO_DIR) -AC_SUBST(UNDO_LINK_TO_DIR) - # Enable -Werror in bootstrap stage2 and later. # Change the default to "no" on release branches. AC_ARG_ENABLE(werror,