* configure: Remove obsolete file.

From-SVN: r42644
This commit is contained in:
Zack Weinberg 2001-05-26 18:36:28 +00:00 committed by Zack Weinberg
parent 935e0a4778
commit 3d04c7c664
2 changed files with 4 additions and 635 deletions

View File

@ -1,3 +1,7 @@
2001-05-26 Zack Weinberg <zackw@stanford.edu>
* configure: Remove obsolete file.
2001-05-25 Sam TH <sam@uchicago.edu>
* ch-tree.h tasking.h: Fix header include guards.

635
gcc/ch/configure vendored
View File

@ -1,635 +0,0 @@
#!/bin/sh
# Configuration script for GNU CHILL
# Copyright (C) 1994 Free Software Foundation, Inc.
#This file is part of GNU CC.
#GNU CC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.
#GNU CC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING. If not, write to
#the Free Software Foundation, 59 Temple Place - Suite 330,
#Boston, MA 02111-1307, USA. */
#
# Shell script to create proper links to machine-dependent files in
# preparation for compiling gcc.
#
# Options: --srcdir=DIR specifies directory where sources are.
# --host=HOST specifies host configuration.
# --target=TARGET specifies target configuration.
# --build=TARGET specifies configuration of machine you are
# using to compile GCC.
# --prefix=DIR specifies directory to install in.
# --local-prefix=DIR specifies directory to put local ./include in.
# --exec-prefix=DIR specifies directory to install executables in.
# --with-gnu-ld arrange to work with GNU ld.
# --with-gnu-as arrange to work with GAS.
# --with-stabs arrange to use stabs instead of host debug format.
# --with-elf arrange to use elf instead of host debug format.
# --nfp assume system has no FPU.
#
# If configure succeeds, it leaves its status in config.status.
# If configure fails after disturbing the status quo,
# config.status is removed.
#
progname=$0
# Configure the runtime and regression-test directories
SUBDIRS="runtime utils"
SUBDIRS="$SUBDIRS testsuite/compile"
SUBDIRS="$SUBDIRS testsuite/execute"
SUBDIRS="$SUBDIRS testsuite/execute/telebras"
SUBDIRS="$SUBDIRS testsuite/noncompile"
SUBDIRS="$SUBDIRS testsuite/examples"
SUBDIRS="$SUBDIRS testsuite/execute/oe"
SUBDIRS="$SUBDIRS testsuite/compile/elektra"
SUBDIRS="$SUBDIRS testsuite/compile/votrics"
# Default --srcdir to the directory where the script is found,
# if a directory was specified.
# The second sed call is to convert `.//configure' to `./configure'.
srcdir=`echo $0 | sed 's|//|/|' | sed 's|/[^/]*$||'`
if [ x$srcdir = x$0 ]
then
srcdir=
fi
host=
# Default prefix to /usr/local.
prefix=/usr/local
# local_prefix specifies where to find the directory /usr/local/include
# We don't use $(prefix) for this
# because we always want GCC to search /usr/local/include
# even if GCC is installed somewhere other than /usr/local.
# Think THREE TIMES before specifying any other value for this!
# DO NOT make this use $prefix!
local_prefix=/usr/local
# For our purposes, this must be prefix. This is apparently
# only done for the benefit of glibc, and we don't use glibc.
local_prefix='$(prefix)'
# Default is to let the Makefile set exec_prefix from $(prefix)
exec_prefix='$(prefix)'
program_transform_name=
program_transform_set=
site=
remove=rm
hard_link=ln
symbolic_link='ln -s'
copy=cp
# Record all the arguments, to write them in config.status.
arguments=$*
#for Test
#remove="echo rm"
#hard_link="echo ln"
#symbolic_link="echo ln -s"
target=
host=
build=
for arg in $*;
do
case $next_arg in
--srcdir)
srcdir=$arg
next_arg=
;;
--host)
host=$arg
next_arg=
;;
--target)
target=$arg
next_arg=
;;
--build)
build=$arg
next_arg=
;;
--prefix)
prefix=$arg
next_arg=
;;
--local-prefix)
local_prefix=$arg
next_arg=
;;
--exec-prefix)
exec_prefix=$arg
next_arg=
;;
--program-transform-name)
# Double any backslashes or dollar signs in the argument.
if [ -n "${arg}" ] ; then
program_transform_name="${program_transform_name} -e `echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
fi
program_transform_set=yes
next_arg=
;;
--program-prefix)
if [ -n "${arg}" ]; then
program_transform_name="${program_transform_name} -e s,^,`echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`,"
fi
program_transform_set=yes
next_arg=
;;
--program-suffix)
if [ -n "${arg}" ]; then
program_transform_name="${program_transform_name} -e s,\$\$,`echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`,"
fi
program_transform_set=yes
next_arg=
;;
--site)
site=${arg}
next_arg=
;;
--x-*)
next_arg=
;;
*)
case $arg in
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr | --s)
next_arg=--srcdir
;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=* | --s=*)
srcdir=`echo $arg | sed 's/-*s[a-z]*=//'`
;;
-host | --host | --hos | --ho | --h)
next_arg=--host
;;
-host=* | --host=* | --hos=* | --ho=* | --h=*)
host=`echo $arg | sed 's/-*h[a-z]*=//'`
;;
-target | --target | --targe | --targ | --tar | --ta | --t)
next_arg=--target
;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target=`echo $arg | sed 's/-*t[a-z]*=//'`
;;
-build | --build | --buil | --bui | --bu | --b)
next_arg=--build
;;
-build=* | --build=* | --buil=* | --bui=* | --bu=* | --b=*)
build=`echo $arg | sed 's/-*b[a-z]*=//'`
;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
next_arg=--prefix
;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=`echo $arg | sed 's/-*p[a-z]*=//'`
;;
-local-prefix | --local-prefix | --local-prefi | --local-pref | --local-pre \
| --local-pr | --local-p | --local- | --local | --loc | --lo | --l)
next_arg=--local-prefix
;;
-local-prefix=* | --local-prefix=* | --local-prefi=* | --local-pref=* \
| --local-pre=* | --local-pr=* | --local-p=* | --local-=* | --local=* \
| --loc=* | --lo=* | --l=*)
local_prefix=`echo $arg | sed 's/-*l[-a-z]*=//'`
;;
-exec-prefix | --exec-prefix | --exec-prefi | --exec-pref | --exec-pre \
| --exec-pr | --exec-p | --exec- | --exec | --exe | --ex | --e)
next_arg=--exec-prefix
;;
-exec-prefix=* | --exec-prefix=* | --exec-prefi=* | --exec-pref=* \
| --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* | --exec=* \
| --exe=* | --ex=* | --e=*)
exec_prefix=`echo $arg | sed 's/-*e[-a-z]*=//'`
;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- | --program-transform \
| --program-transfor | --program-transfo | --program-transf \
| --program-trans | --program-tran | --program-tra \
| --program-tr | --program-t)
next_arg=--program-transform-name
;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* | --program-transfo=* \
| --program-transf=* | --program-trans=* | --program-tran=* \
| --program-tra=* | --program-tr=* | --program-t=*)
arg=`echo ${arg} | sed -e 's/^[-a-z_]*=//'`
# Double any \ or $ in the argument.
if [ -n "${arg}" ] ; then
program_transform_name="${program_transform_name} -e `echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
fi
program_transform_set=yes
;;
-program-prefix | --program-prefix | --program-prefi \
| --program-pref | --program-pre | --program-pr \
| --program-p)
next_arg=--program-prefix
;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* \
| --program-p=*)
arg=`echo ${arg} | sed -e 's/^[-a-z_]*=//'`
if [ -n "${arg}" ]; then
program_transform_name="${program_transform_name} -e s,^,`echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`,"
fi
program_transform_set=yes
;;
-program-suffix | --program-suffix | --program-suffi \
| --program-suff | --program-suf | --program-su \
| --program-s)
next_arg=--program-suffix
;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* \
| --program-s=*)
arg=`echo ${arg} | sed -e 's/^[-a-z_]*=//'`
if [ -n "${arg}" ]; then
program_transform_name="${program_transform_name} -e s,\$\$,`echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`,"
fi
program_transform_set=yes
;;
-site | --site | --sit)
next_arg=--site
;;
-site=* | --site=* | --sit=* | --si=*)
site=`echo ${arg} | sed 's/^[-a-z]*=//'`
;;
-with-gnu-ld | --with-gnu-ld | --with-gnu-l)
gnu_ld=yes
;;
-gas | --gas | --ga | --g | -with-gnu-as | --with-gnu-as | -with-gnu-a)
gas=yes
;;
-nfp | --nfp | --nf | --n)
nfp=yes
;;
-with-stabs | -with-stab | -with-sta | -with-st | -with-s \
| --with-stabs | --with-stab | --with-sta | --with-st | --with-s \
| -stabs | -stab | -sta | -st \
| --stabs | --stab | --sta | --st)
stabs=yes
;;
-with-elf | -with-el | -with-se \
| --with-elf | --with-el | --with-e \
| -elf | -el | -e \
|--elf | --el | --e)
elf=yes
;;
-with-* | --with-*) ;; #ignored
-without-* | --without-*) ;; #ignored
-enable-* | --enable-*) ;; #ignored
-x | --x) ;; # ignored
-x-*=* | --x-*=*) ;; # ignored
-x-* | --x-*)
next_arg=--x-ignored # ignored
;;
--he*) ;; # ignored for now (--help)
--vers*) ;; # ignored for now (--version)
-v | -verb* | --verb*) ;; # ignored for now (--verbose)
--program-*) ;; #ignored (--program-prefix, --program-suffix)
--c*) ;; #ignored (--cache-file)
--q*) ;; #ignored (--quiet)
--si*) ;; #ignored (--silent)
-*)
echo "Invalid option \`$arg'" 1>&2
exit 1
;;
*)
# Allow configure HOST TARGET
if [ x$host = x ]
then
host=$target
fi
target=$arg
;;
esac
esac
done
# Find the source files, if location was not specified.
if [ x$srcdir = x ]
then
srcdirdefaulted=1
srcdir=.
if [ ! -r tree.c ]
then
srcdir=..
fi
fi
if [ ! -r ${srcdir}/grant.c ]
then
if [ x$srcdirdefaulted = x ]
then
echo "$progname: Can't find CHILL frontend sources in \`${srcdir}'" 1>&2
else
echo "$progname: Can't find CHILL frontend sources in \`.' or \`..'" 1>&2
fi
exit 1
fi
# Make sure that scripts are executable
[ -w ${srcdir} -a -f ${srcdir}/regression.sh ] && \
chmod +x ${srcdir}/regression.sh
[ -w ${srcdir} -a -f ${srcdir}/regression.prpt ] && \
chmod +x ${srcdir}/regression.prpt
[ -w ${srcdir} -a -f ${srcdir}/regression.awk3 ] && \
chmod +x ${srcdir}/regression.awk3
if [ -r ${srcdir}/config.status ] && [ x$srcdir != x. ]
then
echo "$progname: \`configure' has been run in \`${srcdir}'" 1>&2
exit 1
fi
host_xmake_file=
host_truncate_target=
# Complain if an arg is missing
if [ x$build = x ]
then
# If host was specified, always use it for build also to avoid
# confusion. If someone wants a cross compiler where build != host,
# then they must specify build explicitly. Since this case is
# extremely rare, it does not matter that it is slightly inconvenient.
if [ x$host != x ]
then
build=$host
# This way of testing the result of a command substitution is
# defined by Posix.2 (section 3.9.1) as well as traditional shells.
elif build=`${srcdir}/../config.guess`
then
echo "This appears to be a ${build} system." 1>&2
elif [ x$target != x ]
then
echo 'Config.guess failed to determine the host type. Defaulting to target.'
build=$target
else
echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
echo "\
Usage: `basename $progname` [--host=HOST] [--build=BUILD]
[--prefix=DIR] [--gxx-include-dir=DIR] [--local-pref=DIR] [--exec-pref=DIR]
[--with-gnu-as] [--with-gnu-ld] [--with-stabs] [--with-elf] [--nfp] TARGET" 1>&2
echo "Where HOST, TARGET and BUILD are three-part configuration names " 1>&2
if [ -r config.status ]
then
tail +2 config.status 1>&2
fi
exit 1
fi
fi
# If $host was not specified, use $build.
if [ x$host = x ]
then
host=$build
fi
# If $target was not specified, use $host.
if [ x$target = x ]
then
target=$host
fi
# Validate the specs, and canonicalize them.
canon_build=`/bin/sh $srcdir/../config.sub $build` || exit 1
canon_host=`/bin/sh $srcdir/../config.sub $host` || exit 1
canon_target=`/bin/sh $srcdir/../config.sub $target` || exit 1
rm -f config.bak
if [ -f config.status ]; then mv -f config.status config.bak; fi
#
# For the current directory and all of the designated SUBDIRS,
# do the rest of the script...
#
if [ ! -d testsuite ] ; then mkdir testsuite; fi
_SUBDIRS=
for d in $SUBDIRS; do
[ -d $srcdir/$d ] && _SUBDIRS="$_SUBDIRS $d"
done
savesrcdir=$srcdir
STARTDIR=`pwd`
for subdir in $_SUBDIRS
do
tmake_file=
host_xmake_file=
oldsrcdir=$savesrcdir
# ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
# Re-adjust the path
# Also create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
case $oldsrcdir in
".") srcdir=. ;;
/*) # absolute path
srcdir=${oldsrcdir}/${subdir} ;;
*) # otherwise relative
srcdir=${invsubdir}${oldsrcdir}/${subdir} ;;
esac
if [ -r ${oldsrcdir}/${subdir}/.gdbinit -a ${oldsrcdir} != "." ] ; then
cat > ${subdir}/.gdbinit <<EOF
dir .
dir ${srcdir}
source ${srcdir}/.gdbinit
EOF
fi
case $oldsrcdir in
/*) ;;
*) oldsrcdir=${invsubdir}${oldsrcdir} ;;
esac
mainsrcdir=${oldsrcdir}/..
test -d $subdir || mkdir $subdir
cd $subdir
#
# Create Makefile.tem from Makefile.in.
# Make it set VPATH if necessary so that the sources are found.
# Also change its value of srcdir.
rm -f Makefile.tem
echo "VPATH = ${srcdir}" \
| cat - ${srcdir}/Makefile.in \
| sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.tem
# Conditionalize the makefile for this host machine.
if [ -f ${mainsrcdir}/config/${host_xmake_file} ]
then
rm -f Makefile.xx
sed -e "/####host/ r ${mainsrcdir}/config/${host_xmake_file}" Makefile.tem > Makefile.xx
echo "Merged ${host_xmake_file}."
rm -f Makefile.tem
mv Makefile.xx Makefile.tem
else
# Say in the makefile that there is no host_xmake_file,
# by using a name which (when interpreted relative to $srcdir/config)
# will duplicate another dependency: $srcdir/Makefile.in.
host_xmake_file=../Makefile.in
fi
# Define variables host_canonical, build_canonical, and target_canonical
# because some Cygnus local changes in the Makefile depend on them.
echo host_canonical = ${canon_host} > Makefile.xx
echo target_canonical = ${canon_target} >> Makefile.xx
echo build_canonical = ${canon_build} >> Makefile.xx
cat Makefile.tem >> Makefile.xx
mv Makefile.xx Makefile.tem
# Conditionalize the makefile for this target machine.
if [ -f ${mainsrcdir}/config/${tmake_file} ]
then
rm -f Makefile.xx
sed -e "/####target/ r ${mainsrcdir}/config/${tmake_file}" Makefile.tem > Makefile.xx
echo "Merged ${tmake_file}."
rm -f Makefile.tem
mv Makefile.xx Makefile.tem
else
# Say in the makefile that there is no tmake_file,
# by using a name which (when interpreted relative to $srcdir/config)
# will duplicate another dependency: $srcdir/Makefile.in.
tmake_file=../Makefile.in
fi
# Conditionalize the makefile for this site.
if [ -f ${mainsrcdir}/config/ms-${site} ]
then
rm -f Makefile.xx
sed -e "/####site/ r ${mainsrcdir}/config/ms-${site}" Makefile.tem > Makefile.xx
echo "Merged ms-${site}."
rm -f Makefile.tem
mv Makefile.xx Makefile.tem
fi
# If this is a cross compilation, and we have newlib in the build
# tree, then define inhibit_libc in LIBGCC2_CFLAGS. This will cause
# __eprintf to be left out of libgcc.a, but that's OK because newlib
# has its own version of assert.h.
if [ x$host != x$target ]; then
sed -e 's/^\(LIBGCC2_CFLAGS[ ]*=[ ]*\)/\1-Dinhibit_libc /' Makefile.tem > Makefile.tem2
rm -f Makefile.tem
mv Makefile.tem2 Makefile.tem
fi
# Remove all formfeeds, since some Makes get confused by them.
# Also arrange to give the variables `target', `host_xmake_file',
# `tmake_file', `prefix', `local_prefix', `exec_prefix', `FIXINCLUDES'
# and `INSTALL_HEADERS_DIR' values in the Makefile from the values
# they have in this script.
rm -f Makefile.xx
sed -e "s/ //" -e "s/^target=.*$/target=${target}/" \
-e "s|^xmake_file=.*$|xmake_file=${host_xmake_file}|" \
-e "s|^tmake_file=.*$|tmake_file=${tmake_file}|" \
-e "s|^version=.*$|version=${version}|" \
-e "s|^prefix[ ]*=.*|prefix = $prefix|" \
-e "s|^local_prefix[ ]*=.*|local_prefix = $local_prefix|" \
-e "s|^exec_prefix[ ]*=.*|exec_prefix = $exec_prefix|" \
-e "s|^objdir[ ]*=.*|objdir=`pwd`|" \
Makefile.tem > Makefile.xx
rm -f Makefile.tem
mv Makefile.xx Makefile.tem
# Install Makefile for real, after making final changes.
# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
# Also use all.cross instead of all.internal, and add cross-make to Makefile.
if [ x$canon_host = x$canon_target ]
then
rm -f Makefile
if [ x$canon_host = x$canon_build ]
then
mv Makefile.tem Makefile
else
# When building gcc with a cross-compiler, we need to fix a
# few things.
echo "build= $build" > Makefile
sed -e "/####build/ r ${mainsrcdir}/build-make" Makefile.tem >> Makefile
rm -f Makefile.tem Makefile.xx
fi
else
rm -f Makefile
echo "CROSS=-DCROSS_COMPILE" > Makefile
sed -e "/####cross/ r ${mainsrcdir}/cross-make" Makefile.tem >> Makefile
rm -f Makefile.tem Makefile.xx
fi
echo "Created \`$subdir/Makefile'."
if [ xx${vint} != xx ]
then
vintmsg=" (vint)"
fi
# Describe the chosen configuration in config.status.
# Make that file a shellscript which will reestablish the same configuration.
rm -f config.bak
if [ -f config.status ]; then mv -f config.status config.bak; fi
echo "#!/bin/sh
# This directory was configured as follows:
cd $invsubdir; ${progname}" $arguments > config.new
echo echo host=$canon_host target=$canon_target build=$canon_build >> config.new
chmod a+x config.new
# If we aren't executing the configure script in .
if [ x$subdir != x. ]
then
if [ -f $srcdir/configure ]
then
echo "Running \`${CONFIG_SHELL-sh} $srcdir/configure $arguments\'"
${CONFIG_SHELL-sh} $srcdir/configure $arguments
echo "${srcdir}/configure" $arguments >> config.new
echo echo host=$canon_host target=$canon_target build=$canon_build >> config.new
fi
fi
if [ -f config.bak ] && cmp config.bak config.new >/dev/null 2>/dev/null;
then
mv -f config.bak config.status
rm -f config.new
else
mv -f config.new config.status
rm -f config.bak
fi
cd $STARTDIR
done # end of current-dir SUBDIRS loop
srcdir=$savesrcdir
# Describe the chosen configuration in config.status.
# Make that file a shellscript which will reestablish the same configuration.
echo "#!/bin/sh
# This directory was configured as follows:
${progname}" $arguments > config.new
echo echo host=$canon_host target=$canon_target build=$canon_build >> config.new
chmod a+x config.new
if [ -f config.bak ] && cmp config.bak config.new >/dev/null 2>/dev/null;
then
mv -f config.bak config.status
rm -f config.new
else
mv -f config.new config.status
rm -f config.bak
fi
exit 0