diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 5ba3038c068..9a26e4d228e 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,13 @@
+2003-07-07  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* configure.in (enable_coverage): Remove -DSELF_COVERAGE, add
+	-frandom-seed.
+	* configure: Regenerated.
+	* Makefile.in: Remove extraneous comment.
+	* toplev.c (randomize): Protect against potential multiple calls.
+	* doc/invoke.texi (-frandom-seed): Document use for in coverage
+	files.
+
 2003-07-07  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>
             Eric Botcazou  <ebotcazou@libertysurf.fr>
 
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index 3825d8ae7bc..54c9a89cac5 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -123,8 +123,7 @@ BOOT_CFLAGS = -g -O2
 
 # Flags to determine code coverage. When coverage is disabled, this will
 # contain the optimization flags, as you normally want code coverage
-# without optimization. The -dumpbase $@ makes sure that the auxilary
-# files end up near the object files.
+# without optimization.
 COVERAGE_FLAGS = @coverage_flags@
 coverageexts = .{da,bbg}
 
diff --git a/gcc/configure b/gcc/configure
index b685553bdcc..7112f592734 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -661,7 +661,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:667: checking host system type" >&5
+echo "configure:665: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -682,7 +682,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:688: checking target system type" >&5
+echo "configure:686: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -700,7 +700,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:706: checking build system type" >&5
+echo "configure:704: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -777,7 +777,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # - two terminals occur directly after each other
 # - the path contains an element with a dot in it
 echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:783: checking LIBRARY_PATH variable" >&5
+echo "configure:781: checking LIBRARY_PATH variable" >&5
 case ${LIBRARY_PATH} in
   [:\;]* | *[:\;] | *[:\;][:\;]* |  *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
     library_path_setting="contains current directory"
@@ -802,7 +802,7 @@ fi
 # - two terminals occur directly after each other
 # - the path contains an element with a dot in it
 echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:808: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:806: checking GCC_EXEC_PREFIX variable" >&5
 case ${GCC_EXEC_PREFIX} in
   [:\;]* | *[:\;] | *[:\;][:\;]* |  *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
     gcc_exec_prefix_setting="contains current directory"
@@ -911,7 +911,7 @@ EOF
 fi
 
 echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:917: checking whether a default linker was specified" >&5
+echo "configure:915: checking whether a default linker was specified" >&5
 if test x"${DEFAULT_LINKER+set}" = x"set"; then
   if test x"$gnu_ld_flag" = x"no"; then
     echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
@@ -955,7 +955,7 @@ EOF
 fi
 
 echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:961: checking whether a default assembler was specified" >&5
+echo "configure:959: checking whether a default assembler was specified" >&5
 if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
   if test x"$gas_flag" = x"no"; then
     echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
@@ -974,7 +974,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:980: checking for $ac_word" >&5
+echo "configure:978: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1004,7 +1004,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1010: checking for $ac_word" >&5
+echo "configure:1008: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1055,7 +1055,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1061: checking for $ac_word" >&5
+echo "configure:1059: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1087,7 +1087,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1093: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1091: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1098,12 +1098,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1104 "configure"
+#line 1102 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1129,12 +1129,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1135: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1133: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1140: checking whether we are using GNU C" >&5
+echo "configure:1138: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1143,7 +1143,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1147: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1162,7 +1162,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1168: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1166: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1195,10 +1195,10 @@ fi
 
 if test "x$CC" != xcc; then
   echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1201: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1199: checking whether $CC and cc understand -c and -o together" >&5
 else
   echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1204: checking whether cc understands -c and -o together" >&5
+echo "configure:1202: checking whether cc understands -c and -o together" >&5
 fi
 set dummy $CC; ac_cc="`echo $2 |
 		       sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
@@ -1210,16 +1210,16 @@ else
 # We do the test twice because some compilers refuse to overwrite an
 # existing .o file with -o, though they will create one.
 ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1216: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-   test -f conftest.o && { (eval echo configure:1217: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1214: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+   test -f conftest.o && { (eval echo configure:1215: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
 then
   eval ac_cv_prog_cc_${ac_cc}_c_o=yes
   if test "x$CC" != xcc; then
     # Test first that cc exists at all.
-    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1222: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
       ac_try='cc -c conftest.c -o conftest.o 1>&5'
-      if { (eval echo configure:1224: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-	 test -f conftest.o && { (eval echo configure:1225: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+      if { (eval echo configure:1222: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+	 test -f conftest.o && { (eval echo configure:1223: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
       then
         # cc works too.
         :
@@ -1259,21 +1259,21 @@ fi
 # -------------------------
 
 echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1265: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1263: checking whether ${CC-cc} accepts -Wno-long-long" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   save_CFLAGS="$CFLAGS"
 CFLAGS="-Wno-long-long"
 cat > conftest.$ac_ext <<EOF
-#line 1272 "configure"
+#line 1270 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1279: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1277: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_prog_cc_no_long_long=yes
 else
@@ -1289,7 +1289,7 @@ fi
 echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1295: checking how to run the C preprocessor" >&5
+echo "configure:1293: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1304,13 +1304,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1310 "configure"
+#line 1308 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1316: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1321,13 +1321,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1327 "configure"
+#line 1325 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1333: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1331: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1338,13 +1338,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1344 "configure"
+#line 1342 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1350: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1348: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1369,21 +1369,21 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1375: checking for inline" >&5
+echo "configure:1373: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 1382 "configure"
+#line 1380 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:1389: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1387: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -1410,19 +1410,19 @@ esac
 
 
 echo $ac_n "checking for long long int""... $ac_c" 1>&6
-echo "configure:1416: checking for long long int" >&5
+echo "configure:1414: checking for long long int" >&5
 if eval "test \"`echo '$''{'ac_cv_c_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1421 "configure"
+#line 1419 "configure"
 #include "confdefs.h"
 
 int main() {
 long long int i;
 ; return 0; }
 EOF
-if { (eval echo configure:1428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1426: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_long_long=yes
 else
@@ -1442,19 +1442,19 @@ EOF
 
   fi
 echo $ac_n "checking for __int64""... $ac_c" 1>&6
-echo "configure:1448: checking for __int64" >&5
+echo "configure:1446: checking for __int64" >&5
 if eval "test \"`echo '$''{'ac_cv_c___int64'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1453 "configure"
+#line 1451 "configure"
 #include "confdefs.h"
 
 int main() {
 __int64 i;
 ; return 0; }
 EOF
-if { (eval echo configure:1460: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c___int64=yes
 else
@@ -1475,19 +1475,19 @@ EOF
   fi
 
 echo $ac_n "checking for built-in _Bool""... $ac_c" 1>&6
-echo "configure:1481: checking for built-in _Bool" >&5
+echo "configure:1479: checking for built-in _Bool" >&5
 if eval "test \"`echo '$''{'gcc_cv_c__bool'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1486 "configure"
+#line 1484 "configure"
 #include "confdefs.h"
 
 int main() {
 _Bool foo;
 ; return 0; }
 EOF
-if { (eval echo configure:1493: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c__bool=yes
 else
@@ -1511,13 +1511,13 @@ fi
 
 # sizeof(char) is 1 by definition.
 echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:1517: checking size of short" >&5
+echo "configure:1515: checking size of short" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16 12  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1523 "configure"
+#line 1521 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1527,7 +1527,7 @@ int main() {
 switch (0) case 0: case (sizeof (short) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_short=$ac_size
 else
@@ -1550,13 +1550,13 @@ EOF
 
 
 echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1556: checking size of int" >&5
+echo "configure:1554: checking size of int" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16 12  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1562 "configure"
+#line 1560 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1566,7 +1566,7 @@ int main() {
 switch (0) case 0: case (sizeof (int) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1570: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_int=$ac_size
 else
@@ -1589,13 +1589,13 @@ EOF
 
 
 echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:1595: checking size of long" >&5
+echo "configure:1593: checking size of long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16 12  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1601 "configure"
+#line 1599 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1605,7 +1605,7 @@ int main() {
 switch (0) case 0: case (sizeof (long) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1611: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1609: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_long=$ac_size
 else
@@ -1629,13 +1629,13 @@ EOF
 
 if test $ac_cv_c_long_long = yes; then
   echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:1635: checking size of long long" >&5
+echo "configure:1633: checking size of long long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16 12  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1641 "configure"
+#line 1639 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1645,7 +1645,7 @@ int main() {
 switch (0) case 0: case (sizeof (long long) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1651: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1649: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_long_long=$ac_size
 else
@@ -1670,13 +1670,13 @@ EOF
 fi
 if test $ac_cv_c___int64 = yes; then
   echo $ac_n "checking size of __int64""... $ac_c" 1>&6
-echo "configure:1676: checking size of __int64" >&5
+echo "configure:1674: checking size of __int64" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16 12  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1682 "configure"
+#line 1680 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1686,7 +1686,7 @@ int main() {
 switch (0) case 0: case (sizeof (__int64) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1692: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1690: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof___int64=$ac_size
 else
@@ -1725,7 +1725,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1731: checking for $ac_word" >&5
+echo "configure:1729: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1757,7 +1757,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1763: checking for $ac_word" >&5
+echo "configure:1761: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1790,7 +1790,7 @@ fi
 fi
 
 echo $ac_n "checking for compiler driver that understands Ada""... $ac_c" 1>&6
-echo "configure:1796: checking for compiler driver that understands Ada" >&5
+echo "configure:1794: checking for compiler driver that understands Ada" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_adac'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1833,7 +1833,7 @@ fi
 
 if test x$have_gnat != xno ; then 
 echo $ac_n "checking whether ${ADAC} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1839: checking whether ${ADAC} accepts -Wno-long-long" >&5
+echo "configure:1837: checking whether ${ADAC} accepts -Wno-long-long" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_adac_no_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1971,9 +1971,9 @@ if test x$ac_checking_valgrind != x ; then
   # It is certainly possible that there's valgrind but no valgrind.h.
   # GCC relies on making annotations so we must have both.
   echo $ac_n "checking for VALGRIND_DISCARD in <memcheck.h>""... $ac_c" 1>&6
-echo "configure:1977: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
+echo "configure:1975: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
   cat > conftest.$ac_ext <<EOF
-#line 1979 "configure"
+#line 1977 "configure"
 #include "confdefs.h"
 #include <memcheck.h>
 #ifndef VALGRIND_DISCARD
@@ -1981,7 +1981,7 @@ echo "configure:1977: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
 #endif
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1985: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1997,17 +1997,17 @@ rm -f conftest*
   echo "$ac_t""$gcc_cv_header_memcheck_h" 1>&6
   ac_safe=`echo "valgrind.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for valgrind.h""... $ac_c" 1>&6
-echo "configure:2003: checking for valgrind.h" >&5
+echo "configure:2001: checking for valgrind.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2008 "configure"
+#line 2006 "configure"
 #include "confdefs.h"
 #include <valgrind.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2013: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2011: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2032,7 +2032,7 @@ fi
   # Extract the first word of "valgrind", so it can be a program name with args.
 set dummy valgrind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2038: checking for $ac_word" >&5
+echo "configure:2036: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_valgrind_path'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2087,10 +2087,10 @@ if test "${enable_coverage+set}" = set; then
   enableval="$enable_coverage"
   case "${enableval}" in
 yes|noopt)
-	coverage_flags="-fprofile-arcs -ftest-coverage -O0 -DSELF_COVERAGE=1"
+	coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O0"
 	;;
 opt)
-	coverage_flags="-fprofile-arcs -ftest-coverage -O2 -DSELF_COVERAGE=2"
+	coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O2"
 	;;
 *)
 	{ echo "configure: error: unknown coverage setting $enableval" 1>&2; exit 1; }
@@ -2270,7 +2270,7 @@ fi
 # -------------------------
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2289: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2274: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2303,7 +2303,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2322: checking for $ac_word" >&5
+echo "configure:2307: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2333,7 +2333,7 @@ test -n "$AWK" && break
 done
 
 echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:2352: checking whether ln works" >&5
+echo "configure:2337: checking whether ln works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2365,7 +2365,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2384: checking whether ln -s works" >&5
+echo "configure:2369: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2399,7 +2399,7 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2418: checking for $ac_word" >&5
+echo "configure:2403: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2437,7 +2437,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2456: checking for a BSD compatible install" >&5
+echo "configure:2441: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2491,7 +2491,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 # Extract the first word of "mktemp", so it can be a program name with args.
 set dummy mktemp; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2510: checking for $ac_word" >&5
+echo "configure:2495: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2530,7 +2530,7 @@ else
   # Extract the first word of "makeinfo", so it can be a program name with args.
 set dummy makeinfo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2549: checking for $ac_word" >&5
+echo "configure:2534: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2559,13 +2559,13 @@ fi
 if test -n "$MAKEINFO"; then
   # Found it, now check the version.
   echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2578: checking for modern makeinfo" >&5
+echo "configure:2563: checking for modern makeinfo" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     ac_prog_version=`$MAKEINFO --version 2>&1 |
                    sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
-  echo "configure:2584: version of makeinfo is $ac_prog_version" >&5
+  echo "configure:2569: version of makeinfo is $ac_prog_version" >&5
   case $ac_prog_version in
     '')     gcc_cv_prog_makeinfo_modern=no;;
     4.[2-9]*)
@@ -2593,7 +2593,7 @@ fi
 
 # Is pod2man recent enough to regenerate manpages?
 echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
-echo "configure:2612: checking for recent Pod::Man" >&5
+echo "configure:2597: checking for recent Pod::Man" >&5
 if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
   echo "$ac_t""yes" 1>&6
   GENERATED_MANPAGES=generated-manpages		
@@ -2607,7 +2607,7 @@ fi
 # "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2"
 # but we need to sink errors and handle broken shells.
 echo $ac_n "checking for cmp's capabilities""... $ac_c" 1>&6
-echo "configure:2626: checking for cmp's capabilities" >&5
+echo "configure:2611: checking for cmp's capabilities" >&5
 echo abfoo >t1
 echo cdfoo >t2
 if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
@@ -2630,7 +2630,7 @@ else
   # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2649: checking for $ac_word" >&5
+echo "configure:2634: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2667,7 +2667,7 @@ else
   # Extract the first word of "bison", so it can be a program name with args.
 set dummy bison; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2686: checking for $ac_word" >&5
+echo "configure:2671: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2701,12 +2701,12 @@ fi
 # --------------------
 
 echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:2720: checking for GNU C library" >&5
+echo "configure:2705: checking for GNU C library" >&5
 if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2725 "configure"
+#line 2710 "configure"
 #include "confdefs.h"
 #include <features.h>
 int main() {
@@ -2716,7 +2716,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:2735: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2720: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_glibc=yes
 else
@@ -2737,12 +2737,12 @@ EOF
 fi
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2756: checking for ANSI C header files" >&5
+echo "configure:2741: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2761 "configure"
+#line 2746 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2750,7 +2750,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2769: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2754: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2767,7 +2767,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2786 "configure"
+#line 2771 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2785,7 +2785,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2804 "configure"
+#line 2789 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2806,7 +2806,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2825 "configure"
+#line 2810 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2817,7 +2817,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2821: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2841,12 +2841,12 @@ EOF
 fi
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2860: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2845: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2865 "configure"
+#line 2850 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -2855,7 +2855,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:2874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2859: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -2876,19 +2876,19 @@ EOF
 fi
 
 echo $ac_n "checking for working stdbool.h""... $ac_c" 1>&6
-echo "configure:2895: checking for working stdbool.h" >&5
+echo "configure:2880: checking for working stdbool.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdbool_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2900 "configure"
+#line 2885 "configure"
 #include "confdefs.h"
 #include <stdbool.h>
 int main() {
 bool foo = false;
 ; return 0; }
 EOF
-if { (eval echo configure:2907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2892: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_stdbool_h=yes
 else
@@ -2909,12 +2909,12 @@ EOF
 fi
 
 echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2928: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2913: checking whether string.h and strings.h may both be included" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2933 "configure"
+#line 2918 "configure"
 #include "confdefs.h"
 #include <string.h>
 #include <strings.h>
@@ -2922,7 +2922,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2941: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_string=yes
 else
@@ -2943,12 +2943,12 @@ EOF
 fi
 
 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2962: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2947: checking for sys/wait.h that is POSIX.1 compatible" >&5
 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2967 "configure"
+#line 2952 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/wait.h>
@@ -2964,7 +2964,7 @@ wait (&s);
 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
 ; return 0; }
 EOF
-if { (eval echo configure:2983: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2968: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_sys_wait_h=yes
 else
@@ -2991,17 +2991,17 @@ for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3010: checking for $ac_hdr" >&5
+echo "configure:2995: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3015 "configure"
+#line 3000 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3020: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3005: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3031,17 +3031,17 @@ done
 # Check for thread headers.
 ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:3050: checking for thread.h" >&5
+echo "configure:3035: checking for thread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3055 "configure"
+#line 3040 "configure"
 #include "confdefs.h"
 #include <thread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3045: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3065,17 +3065,17 @@ fi
 
 ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:3084: checking for pthread.h" >&5
+echo "configure:3069: checking for pthread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3089 "configure"
+#line 3074 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3094: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3100,12 +3100,12 @@ fi
 
 # These tests can't be done till we know if we have limits.h.
 echo $ac_n "checking for CHAR_BIT""... $ac_c" 1>&6
-echo "configure:3119: checking for CHAR_BIT" >&5
+echo "configure:3104: checking for CHAR_BIT" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_char_bit'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3124 "configure"
+#line 3109 "configure"
 #include "confdefs.h"
 #ifdef HAVE_LIMITS_H
 #include <limits.h>
@@ -3130,7 +3130,7 @@ fi
 echo "$ac_t""$gcc_cv_decl_char_bit" 1>&6
 if test $gcc_cv_decl_char_bit = no; then
   echo $ac_n "checking number of bits in a byte""... $ac_c" 1>&6
-echo "configure:3149: checking number of bits in a byte" >&5
+echo "configure:3134: checking number of bits in a byte" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_nbby'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3138,7 +3138,7 @@ else
  gcc_cv_c_nbby=
  while test $i -lt 65; do
    cat > conftest.$ac_ext <<EOF
-#line 3157 "configure"
+#line 3142 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3148,7 +3148,7 @@ switch(0) {
   ; }
 ; return 0; }
 EOF
-if { (eval echo configure:3167: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3152: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_nbby=$i; break
 else
@@ -3173,14 +3173,14 @@ EOF
 fi
 fi
 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:3192: checking whether byte ordering is bigendian" >&5
+echo "configure:3177: checking whether byte ordering is bigendian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 3199 "configure"
+#line 3184 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -3191,11 +3191,11 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:3210: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3195: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 3214 "configure"
+#line 3199 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -3206,7 +3206,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:3225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3210: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -3226,7 +3226,7 @@ if test "$cross_compiling" = yes; then
    echo $ac_n "cross-compiling... " 2>&6 
 else
   cat > conftest.$ac_ext <<EOF
-#line 3245 "configure"
+#line 3230 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -3239,7 +3239,7 @@ main () {
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -3257,7 +3257,7 @@ fi
 echo "$ac_t""$ac_cv_c_bigendian" 1>&6
 if test $ac_cv_c_bigendian = unknown; then
 echo $ac_n "checking to probe for byte ordering""... $ac_c" 1>&6
-echo "configure:3276: checking to probe for byte ordering" >&5
+echo "configure:3261: checking to probe for byte ordering" >&5
 
 cat >conftest.c <<EOF
 short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
@@ -3337,7 +3337,7 @@ esac
 # These libraries may be used by collect2.
 # We may need a special search path to get them linked.
 echo $ac_n "checking for collect2 libraries""... $ac_c" 1>&6
-echo "configure:3356: checking for collect2 libraries" >&5
+echo "configure:3341: checking for collect2 libraries" >&5
 if eval "test \"`echo '$''{'gcc_cv_collect2_libs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3348,7 +3348,7 @@ for libs in '' -lld -lmld \
 do
 	LIBS="$libs"
 	cat > conftest.$ac_ext <<EOF
-#line 3367 "configure"
+#line 3352 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3359,7 +3359,7 @@ int main() {
 ldopen()
 ; return 0; }
 EOF
-if { (eval echo configure:3378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gcc_cv_collect2_libs="$libs"; break
 else
@@ -3385,14 +3385,14 @@ save_LIBS="$LIBS"
 LIBS=
 
 echo $ac_n "checking for library containing exc_resume""... $ac_c" 1>&6
-echo "configure:3404: checking for library containing exc_resume" >&5
+echo "configure:3389: checking for library containing exc_resume" >&5
 if eval "test \"`echo '$''{'ac_cv_search_exc_resume'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_exc_resume="no"
 cat > conftest.$ac_ext <<EOF
-#line 3411 "configure"
+#line 3396 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3403,7 +3403,7 @@ int main() {
 exc_resume()
 ; return 0; }
 EOF
-if { (eval echo configure:3422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_exc_resume="none required"
 else
@@ -3414,7 +3414,7 @@ rm -f conftest*
 test "$ac_cv_search_exc_resume" = "no" && for i in exc; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3433 "configure"
+#line 3418 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3425,7 +3425,7 @@ int main() {
 exc_resume()
 ; return 0; }
 EOF
-if { (eval echo configure:3444: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_exc_resume="-l$i"
 break
@@ -3455,14 +3455,14 @@ save_LIBS="$LIBS"
 LIBS=
 
 echo $ac_n "checking for library containing ldexp""... $ac_c" 1>&6
-echo "configure:3474: checking for library containing ldexp" >&5
+echo "configure:3459: checking for library containing ldexp" >&5
 if eval "test \"`echo '$''{'ac_cv_search_ldexp'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_ldexp="no"
 cat > conftest.$ac_ext <<EOF
-#line 3481 "configure"
+#line 3466 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3473,7 +3473,7 @@ int main() {
 ldexp()
 ; return 0; }
 EOF
-if { (eval echo configure:3492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_ldexp="none required"
 else
@@ -3484,7 +3484,7 @@ rm -f conftest*
 test "$ac_cv_search_ldexp" = "no" && for i in m; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3503 "configure"
+#line 3488 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3495,7 +3495,7 @@ int main() {
 ldexp()
 ; return 0; }
 EOF
-if { (eval echo configure:3514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_ldexp="-l$i"
 break
@@ -3522,12 +3522,12 @@ LIBS="$save_LIBS"
 # Use <inttypes.h> only if it exists,
 # doesn't clash with <sys/types.h>, and declares intmax_t.
 echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:3541: checking for inttypes.h" >&5
+echo "configure:3526: checking for inttypes.h" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3546 "configure"
+#line 3531 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <inttypes.h>
@@ -3535,7 +3535,7 @@ int main() {
 intmax_t i = -1;
 ; return 0; }
 EOF
-if { (eval echo configure:3554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3539: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_inttypes_h=yes
 else
@@ -3562,12 +3562,12 @@ for ac_func in times clock dup2 kill getrlimit setrlimit atoll atoq \
         scandir alphasort gettimeofday mbstowcs wcswidth mmap mincore
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3581: checking for $ac_func" >&5
+echo "configure:3566: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3586 "configure"
+#line 3571 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3590,7 +3590,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3617,7 +3617,7 @@ done
 
 if test x$ac_cv_func_mbstowcs = xyes; then
   echo $ac_n "checking whether mbstowcs works""... $ac_c" 1>&6
-echo "configure:3636: checking whether mbstowcs works" >&5
+echo "configure:3621: checking whether mbstowcs works" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_mbstowcs_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3625,7 +3625,7 @@ else
   gcc_cv_func_mbstowcs_works=yes
 else
   cat > conftest.$ac_ext <<EOF
-#line 3644 "configure"
+#line 3629 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 int main()
@@ -3634,7 +3634,7 @@ int main()
   return 0;
 }
 EOF
-if { (eval echo configure:3653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_func_mbstowcs_works=yes
 else
@@ -3658,12 +3658,12 @@ EOF
 fi
 
 echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:3677: checking for ssize_t" >&5
+echo "configure:3662: checking for ssize_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3682 "configure"
+#line 3667 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3694,12 +3694,12 @@ fi
 # Try to determine the array type of the second argument of getgroups
 # for the target system (int or gid_t).
 echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:3713: checking for uid_t in sys/types.h" >&5
+echo "configure:3698: checking for uid_t in sys/types.h" >&5
 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3718 "configure"
+#line 3703 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 EOF
@@ -3728,7 +3728,7 @@ EOF
 fi
 
 echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:3747: checking type of array argument to getgroups" >&5
+echo "configure:3732: checking type of array argument to getgroups" >&5
 if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3736,7 +3736,7 @@ else
   ac_cv_type_getgroups=cross
 else
   cat > conftest.$ac_ext <<EOF
-#line 3755 "configure"
+#line 3740 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Rendell for this test.  */
@@ -3761,7 +3761,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
     ac_cv_type_getgroups=gid_t
 else
@@ -3775,7 +3775,7 @@ fi
 
 if test $ac_cv_type_getgroups = cross; then
         cat > conftest.$ac_ext <<EOF
-#line 3794 "configure"
+#line 3779 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 EOF
@@ -3816,7 +3816,7 @@ fi
 
 
 echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:3835: checking whether the printf functions support %p" >&5
+echo "configure:3820: checking whether the printf functions support %p" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3824,7 +3824,7 @@ else
   gcc_cv_func_printf_ptr=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3843 "configure"
+#line 3828 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 
@@ -3837,7 +3837,7 @@ int main()
   return (p != q);
 }
 EOF
-if { (eval echo configure:3856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3841: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_func_printf_ptr=yes
 else
@@ -3867,7 +3867,7 @@ if test $ac_cv_header_sys_mman_h != yes \
    gcc_cv_func_mmap_anon=no
 else
    echo $ac_n "checking whether read-only mmap of a plain file works""... $ac_c" 1>&6
-echo "configure:3886: checking whether read-only mmap of a plain file works" >&5
+echo "configure:3871: checking whether read-only mmap of a plain file works" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_mmap_file'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3886,7 +3886,7 @@ fi
 
 echo "$ac_t""$gcc_cv_func_mmap_file" 1>&6
    echo $ac_n "checking whether mmap from /dev/zero works""... $ac_c" 1>&6
-echo "configure:3905: checking whether mmap from /dev/zero works" >&5
+echo "configure:3890: checking whether mmap from /dev/zero works" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_mmap_dev_zero'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3912,12 +3912,12 @@ echo "$ac_t""$gcc_cv_func_mmap_dev_zero" 1>&6
 
    # Unlike /dev/zero, the MAP_ANON(YMOUS) defines can be probed for.
    echo $ac_n "checking for MAP_ANON(YMOUS)""... $ac_c" 1>&6
-echo "configure:3931: checking for MAP_ANON(YMOUS)" >&5
+echo "configure:3916: checking for MAP_ANON(YMOUS)" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_map_anon'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3936 "configure"
+#line 3921 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/mman.h>
@@ -3931,7 +3931,7 @@ int main() {
 int n = MAP_ANONYMOUS;
 ; return 0; }
 EOF
-if { (eval echo configure:3950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3935: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_decl_map_anon=yes
 else
@@ -3949,7 +3949,7 @@ echo "$ac_t""$gcc_cv_decl_map_anon" 1>&6
      gcc_cv_func_mmap_anon=no
    else
      echo $ac_n "checking whether mmap with MAP_ANON(YMOUS) works""... $ac_c" 1>&6
-echo "configure:3968: checking whether mmap with MAP_ANON(YMOUS) works" >&5
+echo "configure:3953: checking whether mmap with MAP_ANON(YMOUS) works" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_mmap_anon'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4004,12 +4004,12 @@ case "${host}" in
   ;;
 esac
 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:4023: checking for pid_t" >&5
+echo "configure:4008: checking for pid_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4028 "configure"
+#line 4013 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -4038,17 +4038,17 @@ fi
 
 ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:4057: checking for vfork.h" >&5
+echo "configure:4042: checking for vfork.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4062 "configure"
+#line 4047 "configure"
 #include "confdefs.h"
 #include <vfork.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4067: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4073,18 +4073,18 @@ else
 fi
 
 echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:4092: checking for working vfork" >&5
+echo "configure:4077: checking for working vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:4098: checking for vfork" >&5
+echo "configure:4083: checking for vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4103 "configure"
+#line 4088 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vfork(); below.  */
@@ -4107,7 +4107,7 @@ vfork();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vfork=yes"
 else
@@ -4129,7 +4129,7 @@ fi
 ac_cv_func_vfork_works=$ac_cv_func_vfork
 else
   cat > conftest.$ac_ext <<EOF
-#line 4148 "configure"
+#line 4133 "configure"
 #include "confdefs.h"
 /* Thanks to Paul Eggert for this test.  */
 #include <stdio.h>
@@ -4224,7 +4224,7 @@ main() {
   }
 }
 EOF
-if { (eval echo configure:4243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_vfork_works=yes
 else
@@ -4263,7 +4263,7 @@ fi
 
 
   echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:4282: checking for iconv" >&5
+echo "configure:4267: checking for iconv" >&5
 if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4271,7 +4271,7 @@ else
     am_cv_func_iconv="no, consider installing GNU libiconv"
     am_cv_lib_iconv=no
     cat > conftest.$ac_ext <<EOF
-#line 4290 "configure"
+#line 4275 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -4281,7 +4281,7 @@ iconv_t cd = iconv_open("","");
        iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:4300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_func_iconv=yes
 else
@@ -4293,7 +4293,7 @@ rm -f conftest*
       am_save_LIBS="$LIBS"
       LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
       cat > conftest.$ac_ext <<EOF
-#line 4312 "configure"
+#line 4297 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -4303,7 +4303,7 @@ iconv_t cd = iconv_open("","");
          iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:4322: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_lib_iconv=yes
         am_cv_func_iconv=yes
@@ -4324,13 +4324,13 @@ echo "$ac_t""$am_cv_func_iconv" 1>&6
 EOF
 
     echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:4343: checking for iconv declaration" >&5
+echo "configure:4328: checking for iconv declaration" >&5
     if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
       cat > conftest.$ac_ext <<EOF
-#line 4349 "configure"
+#line 4334 "configure"
 #include "confdefs.h"
 
 #include <stdlib.h>
@@ -4349,7 +4349,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:4368: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4353: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   am_cv_proto_iconv_arg1=""
 else
@@ -4387,12 +4387,12 @@ for ac_func in getenv atol sbrk abort atof getcwd getwd \
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4406: checking whether $ac_func is declared" >&5
+echo "configure:4391: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4411 "configure"
+#line 4396 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4406,7 +4406,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4425: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4508,12 +4508,12 @@ for ac_func in getrlimit setrlimit getrusage
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4527: checking whether $ac_func is declared" >&5
+echo "configure:4512: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4532 "configure"
+#line 4517 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4531,7 +4531,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4550: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4535: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4570,7 +4570,7 @@ fi
 
 
 cat > conftest.$ac_ext <<EOF
-#line 4589 "configure"
+#line 4574 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4583,7 +4583,7 @@ int main() {
 rlim_t l = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:4602: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -4600,12 +4600,12 @@ for ac_func in ldgetname
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4619: checking whether $ac_func is declared" >&5
+echo "configure:4604: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4624 "configure"
+#line 4609 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4623,7 +4623,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4627: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4659,12 +4659,12 @@ for ac_func in times
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4678: checking whether $ac_func is declared" >&5
+echo "configure:4663: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4683 "configure"
+#line 4668 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4682,7 +4682,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4701: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4686: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4716,13 +4716,13 @@ fi
 
 # More time-related stuff.
 echo $ac_n "checking for struct tms""... $ac_c" 1>&6
-echo "configure:4735: checking for struct tms" >&5
+echo "configure:4720: checking for struct tms" >&5
 if eval "test \"`echo '$''{'ac_cv_struct_tms'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
 cat > conftest.$ac_ext <<EOF
-#line 4741 "configure"
+#line 4726 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4735,7 +4735,7 @@ int main() {
 struct tms tms;
 ; return 0; }
 EOF
-if { (eval echo configure:4754: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4739: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_struct_tms=yes
 else
@@ -4758,13 +4758,13 @@ fi
 # use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
 # revisit after autoconf 2.50.
 echo $ac_n "checking for clock_t""... $ac_c" 1>&6
-echo "configure:4777: checking for clock_t" >&5
+echo "configure:4762: checking for clock_t" >&5
 if eval "test \"`echo '$''{'gcc_cv_type_clock_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
 cat > conftest.$ac_ext <<EOF
-#line 4783 "configure"
+#line 4768 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4774,7 +4774,7 @@ int main() {
 clock_t x;
 ; return 0; }
 EOF
-if { (eval echo configure:4793: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_type_clock_t=yes
 else
@@ -4795,12 +4795,12 @@ EOF
 fi
 
 echo $ac_n "checking for uchar""... $ac_c" 1>&6
-echo "configure:4814: checking for uchar" >&5
+echo "configure:4799: checking for uchar" >&5
 if eval "test \"`echo '$''{'gcc_cv_type_uchar'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4819 "configure"
+#line 4804 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4811,7 +4811,7 @@ if ((uchar *)0) return 0;
  if (sizeof(uchar)) return 0;
 ; return 0; }
 EOF
-if { (eval echo configure:4830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4815: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_uchar=yes
 else
@@ -4841,7 +4841,7 @@ if test "${enable_initfini_array+set}" = set; then
 else
   
 echo $ac_n "checking for .preinit_array/.init_array/.fini_array support""... $ac_c" 1>&6
-echo "configure:4860: checking for .preinit_array/.init_array/.fini_array support" >&5
+echo "configure:4845: checking for .preinit_array/.init_array/.fini_array support" >&5
 if eval "test \"`echo '$''{'gcc_cv_initfini_array'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4849,7 +4849,7 @@ else
   gcc_cv_initfini_array=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 4868 "configure"
+#line 4853 "configure"
 #include "confdefs.h"
 
 static int x = -1;
@@ -4857,7 +4857,7 @@ int main (void) { return x; }
 int foo (void) { x = 0; }
 int (*fp) (void) __attribute__ ((section (".init_array"))) = foo;
 EOF
-if { (eval echo configure:4876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4861: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_initfini_array=yes
 else
@@ -4885,12 +4885,12 @@ fi
 
 # mkdir takes a single argument on some systems. 
 echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:4904: checking if mkdir takes one argument" >&5
+echo "configure:4889: checking if mkdir takes one argument" >&5
 if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4909 "configure"
+#line 4894 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -4907,7 +4907,7 @@ int main() {
 mkdir ("foo", 0);
 ; return 0; }
 EOF
-if { (eval echo configure:4926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_mkdir_takes_one_arg=no
 else
@@ -4947,7 +4947,7 @@ fi
 
 
 echo $ac_n "checking for main in -lunwind""... $ac_c" 1>&6
-echo "configure:4966: checking for main in -lunwind" >&5
+echo "configure:4951: checking for main in -lunwind" >&5
 ac_lib_var=`echo unwind'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4955,14 +4955,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lunwind  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4974 "configure"
+#line 4959 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:4981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -5264,7 +5264,7 @@ fi
 
 
         echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:5283: checking for strerror in -lcposix" >&5
+echo "configure:5268: checking for strerror in -lcposix" >&5
 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -5272,7 +5272,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lcposix  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5291 "configure"
+#line 5276 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5283,7 +5283,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:5302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -5306,12 +5306,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5325: checking for working const" >&5
+echo "configure:5310: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5330 "configure"
+#line 5315 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -5360,7 +5360,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5379: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5364: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -5381,12 +5381,12 @@ EOF
 fi
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5400: checking for off_t" >&5
+echo "configure:5385: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5405 "configure"
+#line 5390 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -5414,12 +5414,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5433: checking for size_t" >&5
+echo "configure:5418: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5438 "configure"
+#line 5423 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -5449,19 +5449,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5468: checking for working alloca.h" >&5
+echo "configure:5453: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5473 "configure"
+#line 5458 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:5480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -5482,12 +5482,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5501: checking for alloca" >&5
+echo "configure:5486: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5506 "configure"
+#line 5491 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -5515,7 +5515,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:5534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5519: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -5547,12 +5547,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5566: checking whether alloca needs Cray hooks" >&5
+echo "configure:5551: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5571 "configure"
+#line 5556 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -5577,12 +5577,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5596: checking for $ac_func" >&5
+echo "configure:5581: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5601 "configure"
+#line 5586 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5605,7 +5605,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5632,7 +5632,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5651: checking stack direction for C alloca" >&5
+echo "configure:5636: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5640,7 +5640,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 5659 "configure"
+#line 5644 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -5659,7 +5659,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:5678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -5684,17 +5684,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5703: checking for $ac_hdr" >&5
+echo "configure:5688: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5708 "configure"
+#line 5693 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5723,12 +5723,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5742: checking for $ac_func" >&5
+echo "configure:5727: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5747 "configure"
+#line 5732 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5751,7 +5751,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5776,7 +5776,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:5795: checking for working mmap" >&5
+echo "configure:5780: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5784,7 +5784,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 5803 "configure"
+#line 5788 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -5924,7 +5924,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:5943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -5952,17 +5952,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5971: checking for $ac_hdr" >&5
+echo "configure:5956: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5976 "configure"
+#line 5961 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5981: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5966: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5992,12 +5992,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6011: checking for $ac_func" >&5
+echo "configure:5996: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6016 "configure"
+#line 6001 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6020,7 +6020,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6049,12 +6049,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6068: checking for $ac_func" >&5
+echo "configure:6053: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6073 "configure"
+#line 6058 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6077,7 +6077,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6111,19 +6111,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:6130: checking for LC_MESSAGES" >&5
+echo "configure:6115: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6135 "configure"
+#line 6120 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:6142: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -6144,7 +6144,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:6163: checking whether NLS is requested" >&5
+echo "configure:6148: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -6164,7 +6164,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:6183: checking whether included gettext is requested" >&5
+echo "configure:6168: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -6183,17 +6183,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6202: checking for libintl.h" >&5
+echo "configure:6187: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6207 "configure"
+#line 6192 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6212: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6210,19 +6210,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:6229: checking for gettext in libc" >&5
+echo "configure:6214: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6234 "configure"
+#line 6219 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:6241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -6238,7 +6238,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:6257: checking for bindtextdomain in -lintl" >&5
+echo "configure:6242: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6246,7 +6246,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6265 "configure"
+#line 6250 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6257,7 +6257,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:6276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6273,19 +6273,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:6292: checking for gettext in libintl" >&5
+echo "configure:6277: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6297 "configure"
+#line 6282 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:6304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -6313,7 +6313,7 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6332: checking for $ac_word" >&5
+echo "configure:6317: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6347,12 +6347,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6366: checking for $ac_func" >&5
+echo "configure:6351: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6371 "configure"
+#line 6356 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6375,7 +6375,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6402,7 +6402,7 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6421: checking for $ac_word" >&5
+echo "configure:6406: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6438,7 +6438,7 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6457: checking for $ac_word" >&5
+echo "configure:6442: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6470,7 +6470,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 6489 "configure"
+#line 6474 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -6478,7 +6478,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:6497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -6510,7 +6510,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6529: checking for $ac_word" >&5
+echo "configure:6514: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6544,7 +6544,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6563: checking for $ac_word" >&5
+echo "configure:6548: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6580,7 +6580,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6599: checking for $ac_word" >&5
+echo "configure:6584: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6670,7 +6670,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:6689: checking for catalogs to be installed" >&5
+echo "configure:6674: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -6698,17 +6698,17 @@ echo "configure:6689: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:6717: checking for linux/version.h" >&5
+echo "configure:6702: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6722 "configure"
+#line 6707 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6727: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6712: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6780,7 +6780,7 @@ fi
 case $host_os in
 	win32 | pe | cygwin* | mingw32* | uwin*)
 echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:6799: checking whether windows registry support is requested" >&5
+echo "configure:6784: checking whether windows registry support is requested" >&5
 if test "x$enable_win32_registry" != xno; then
   cat >> confdefs.h <<\EOF
 #define ENABLE_WIN32_REGISTRY 1
@@ -6789,14 +6789,14 @@ EOF
   echo "$ac_t""yes" 1>&6
   
 echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:6808: checking for library containing RegOpenKeyExA" >&5
+echo "configure:6793: checking for library containing RegOpenKeyExA" >&5
 if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_RegOpenKeyExA="no"
 cat > conftest.$ac_ext <<EOF
-#line 6815 "configure"
+#line 6800 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6807,7 +6807,7 @@ int main() {
 RegOpenKeyExA()
 ; return 0; }
 EOF
-if { (eval echo configure:6826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_RegOpenKeyExA="none required"
 else
@@ -6818,7 +6818,7 @@ rm -f conftest*
 test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6837 "configure"
+#line 6822 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6829,7 +6829,7 @@ int main() {
 RegOpenKeyExA()
 ; return 0; }
 EOF
-if { (eval echo configure:6848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_RegOpenKeyExA="-l$i"
 break
@@ -6871,7 +6871,7 @@ esac
 
 if test "x$enable_win32_registry" != xno; then
   echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:6890: checking registry key on windows hosts" >&5
+echo "configure:6875: checking registry key on windows hosts" >&5
   cat >> confdefs.h <<EOF
 #define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
 EOF
@@ -7081,7 +7081,7 @@ esac
 # build->target assembler and hope that it will have the same features
 # as the host->target assembler we'll be using.
 echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:7100: checking what assembler to use" >&5
+echo "configure:7085: checking what assembler to use" >&5
 in_tree_gas=no
 gcc_cv_as=
 gcc_cv_gas_major_version=
@@ -7199,7 +7199,7 @@ esac
 # build->target linker and hope that it will have the same features
 # as the host->target linker we'll be using.
 echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:7218: checking what linker to use" >&5
+echo "configure:7203: checking what linker to use" >&5
 in_tree_ld=no
 gcc_cv_ld=
 gcc_cv_gld_major_version=
@@ -7307,7 +7307,7 @@ esac
 # Figure out what nm we will be using.
 gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
 echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:7326: checking what nm to use" >&5
+echo "configure:7311: checking what nm to use" >&5
 in_tree_nm=no
 if test -x nm$host_exeext; then
 	gcc_cv_nm=./nm$host_exeext
@@ -7330,7 +7330,7 @@ esac
 
 # Figure out what objdump we will be using.
 echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:7349: checking what objdump to use" >&5
+echo "configure:7334: checking what objdump to use" >&5
 in_tree_objdump=no
 if test -x objdump$host_exeext; then
 	gcc_cv_objdump=./objdump$host_exeext
@@ -7355,7 +7355,7 @@ esac
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7374: checking assembler alignment features" >&5
+echo "configure:7359: checking assembler alignment features" >&5
 gcc_cv_as_alignment_features=none
 if test $in_tree_gas = yes; then
   # Gas version 2.6 and later support for .balign and .p2align.
@@ -7416,7 +7416,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:7435: checking assembler subsection support" >&5
+echo "configure:7420: checking assembler subsection support" >&5
 gcc_cv_as_subsections=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -7464,7 +7464,7 @@ fi
 echo "$ac_t""$gcc_cv_as_subsections" 1>&6
 
 echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:7483: checking assembler weak support" >&5
+echo "configure:7468: checking assembler weak support" >&5
 gcc_cv_as_weak=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -7494,7 +7494,7 @@ fi
 echo "$ac_t""$gcc_cv_as_weak" 1>&6
 
 echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:7513: checking assembler hidden support" >&5
+echo "configure:7498: checking assembler hidden support" >&5
 gcc_cv_as_hidden=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -7579,7 +7579,7 @@ libgcc_visibility=$gcc_cv_as_hidden
 
 
 echo $ac_n "checking assembler leb128 support""... $ac_c" 1>&6
-echo "configure:7598: checking assembler leb128 support" >&5
+echo "configure:7583: checking assembler leb128 support" >&5
 gcc_cv_as_leb128=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -7631,7 +7631,7 @@ fi
 echo "$ac_t""$gcc_cv_as_leb128" 1>&6
 
 echo $ac_n "checking assembler eh_frame optimization""... $ac_c" 1>&6
-echo "configure:7650: checking assembler eh_frame optimization" >&5
+echo "configure:7635: checking assembler eh_frame optimization" >&5
 gcc_cv_as_eh_frame=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -7719,7 +7719,7 @@ fi
 echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
 
 echo $ac_n "checking assembler section merging support""... $ac_c" 1>&6
-echo "configure:7738: checking assembler section merging support" >&5
+echo "configure:7723: checking assembler section merging support" >&5
 gcc_cv_as_shf_merge=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -7749,7 +7749,7 @@ fi
 echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
 
 echo $ac_n "checking assembler thread-local storage support""... $ac_c" 1>&6
-echo "configure:7768: checking assembler thread-local storage support" >&5
+echo "configure:7753: checking assembler thread-local storage support" >&5
 gcc_cv_as_tls=no
 conftest_s=
 tls_first_major=
@@ -7959,7 +7959,7 @@ case "$target" in
   # All TARGET_ABI_OSF targets.
   alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
     echo $ac_n "checking assembler supports explicit relocations""... $ac_c" 1>&6
-echo "configure:7978: checking assembler supports explicit relocations" >&5
+echo "configure:7963: checking assembler supports explicit relocations" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_explicit_relocs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8012,7 +8012,7 @@ EOF
     ;;
   sparc*-*-*)
     echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8031: checking assembler .register pseudo-op support" >&5
+echo "configure:8016: checking assembler .register pseudo-op support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8040,7 +8040,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:8059: checking assembler supports -relax" >&5
+echo "configure:8044: checking assembler supports -relax" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8068,7 +8068,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:8087: checking assembler and linker support unaligned pc related relocs" >&5
+echo "configure:8072: checking assembler and linker support unaligned pc related relocs" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8095,7 +8095,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler and linker support unaligned pc related relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:8114: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
+echo "configure:8099: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8135,7 +8135,7 @@ EOF
     fi
 
     echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:8154: checking for assembler offsetable %lo() support" >&5
+echo "configure:8139: checking for assembler offsetable %lo() support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8174,7 +8174,7 @@ EOF
 
   i[34567]86-*-* | x86_64-*-*)
     echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:8193: checking assembler instructions" >&5
+echo "configure:8178: checking assembler instructions" >&5
     gcc_cv_as_instructions=
     if test $in_tree_gas = yes ; then 
        if test $gcc_cv_gas_major_version -eq 2 \
@@ -8208,7 +8208,7 @@ EOF
     echo "$ac_t""$gcc_cv_as_instructions" 1>&6
 
     echo $ac_n "checking assembler GOTOFF in data directives""... $ac_c" 1>&6
-echo "configure:8227: checking assembler GOTOFF in data directives" >&5
+echo "configure:8212: checking assembler GOTOFF in data directives" >&5
     gcc_cv_as_gotoff_in_data=no
     if test $in_tree_gas = yes ; then
        if test $gcc_cv_gas_major_version -eq 2 \
@@ -8242,7 +8242,7 @@ EOF
 
   ia64*-*-*)
     echo $ac_n "checking assembler supports ltoffx and ldxmov""... $ac_c" 1>&6
-echo "configure:8261: checking assembler supports ltoffx and ldxmov" >&5
+echo "configure:8246: checking assembler supports ltoffx and ldxmov" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_ltoffx_ldxmov_relocs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8287,7 +8287,7 @@ EOF
 esac
 
 echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:8306: checking assembler dwarf2 debug_line support" >&5
+echo "configure:8291: checking assembler dwarf2 debug_line support" >&5
 gcc_cv_as_dwarf2_debug_line=no
 # ??? Not all targets support dwarf2 debug_line, even within a version
 # of gas.  Moreover, we need to emit a valid instruction to trigger any
@@ -8351,7 +8351,7 @@ fi
 echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
 
 echo $ac_n "checking assembler --gdwarf2 support""... $ac_c" 1>&6
-echo "configure:8370: checking assembler --gdwarf2 support" >&5
+echo "configure:8355: checking assembler --gdwarf2 support" >&5
 gcc_cv_as_gdwarf2_flag=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -8383,7 +8383,7 @@ fi
 echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
 
 echo $ac_n "checking assembler --gstabs support""... $ac_c" 1>&6
-echo "configure:8402: checking assembler --gstabs support" >&5
+echo "configure:8387: checking assembler --gstabs support" >&5
 gcc_cv_as_gstabs_flag=no
 if test $in_tree_gas = yes ; then
    if test $gcc_cv_gas_major_version -eq 2 \
@@ -8421,7 +8421,7 @@ fi
 echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
 
 echo $ac_n "checking linker read-only and read-write section mixing""... $ac_c" 1>&6
-echo "configure:8440: checking linker read-only and read-write section mixing" >&5
+echo "configure:8425: checking linker read-only and read-write section mixing" >&5
 gcc_cv_ld_ro_rw_mix=unknown
 if test $in_tree_ld = yes ; then
   if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 \
@@ -8460,7 +8460,7 @@ fi
 echo "$ac_t""$gcc_cv_ld_ro_rw_mix" 1>&6
 
 echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:8479: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:8464: checking linker PT_GNU_EH_FRAME support" >&5
 gcc_cv_ld_eh_frame_hdr=no
 if test $in_tree_ld = yes ; then
   if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 \
@@ -8482,7 +8482,7 @@ fi
 echo "$ac_t""$gcc_cv_ld_eh_frame_hdr" 1>&6
 
 echo $ac_n "checking linker position independent executable support""... $ac_c" 1>&6
-echo "configure:8501: checking linker position independent executable support" >&5
+echo "configure:8486: checking linker position independent executable support" >&5
 gcc_cv_ld_pie=no
 if test $in_tree_ld = yes ; then
   if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 15 -o "$gcc_cv_gld_major_version" -gt 2 \
@@ -8507,7 +8507,7 @@ echo "$ac_t""$gcc_cv_ld_pie" 1>&6
 case "$target" in
   mips*-*-*)
     echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:8526: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:8511: checking whether libgloss uses STARTUP directives consistently" >&5
     gcc_cv_mips_libgloss_startup=no
     gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
     if test "x$exec_prefix" = xNONE; then
@@ -8535,7 +8535,7 @@ EOF
     echo "$ac_t""$gcc_cv_mips_libgloss_startup" 1>&6
 
     echo $ac_n "checking whether the assembler has explicit relocation support""... $ac_c" 1>&6
-echo "configure:8554: checking whether the assembler has explicit relocation support" >&5
+echo "configure:8539: checking whether the assembler has explicit relocation support" >&5
     if test x$gcc_cv_mips_explicit_relocs = x; then
       gcc_cv_mips_explicit_relocs=no
       if test $in_tree_gas = yes; then
@@ -8741,7 +8741,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:8760: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:8745: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
diff --git a/gcc/configure.in b/gcc/configure.in
index 869ce8d3567..3fcee82ed1a 100644
--- a/gcc/configure.in
+++ b/gcc/configure.in
@@ -430,10 +430,10 @@ AC_ARG_ENABLE(coverage,
 			  default is noopt],
 [case "${enableval}" in
 yes|noopt)
-	coverage_flags="-fprofile-arcs -ftest-coverage -O0 -DSELF_COVERAGE=1"
+	coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O0"
 	;;
 opt)
-	coverage_flags="-fprofile-arcs -ftest-coverage -O2 -DSELF_COVERAGE=2"
+	coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O2"
 	;;
 *)
 	AC_MSG_ERROR(unknown coverage setting $enableval)
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 275c213e867..395e20b3e9e 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -3323,8 +3323,11 @@ Dump after function inlining, to @file{@var{file}.inlined}.
 @item -frandom-seed=@var{string}
 @opindex frandom-string
 This option provides a seed that GCC uses when it would otherwise use
-random numbers.  At present, this is used to generate certain symbol names
-that have to be different in every compiled file.
+random numbers.  It is used to generate certain symbol names
+that have to be different in every compiled file. It is also used to
+place unique stamps in coverage data files and the object files that
+produce them. You can use the @option{-frandom-seed} option to produce
+reproducibly identical object files.
 
 The @var{string} should be different for every file you compile.
 
diff --git a/gcc/toplev.c b/gcc/toplev.c
index 6351b69c7a9..209109f2d43 100644
--- a/gcc/toplev.c
+++ b/gcc/toplev.c
@@ -1600,7 +1600,7 @@ randomize (void)
       sprintf (random_seed, HOST_WIDE_INT_PRINT_HEX, value);
       flag_random_seed = random_seed;
     }
-  else
+  else if (!local_tick)
     local_tick = -1;
 }