From e656c72f3c31bb5ef8b0d70258cee7249d1e024a Mon Sep 17 00:00:00 2001 From: Tom Tromey Date: Tue, 3 Aug 1999 03:19:52 +0000 Subject: [PATCH] * aclocal.m4, configure: Rebuilt for new libtool. From-SVN: r28438 --- zlib/ChangeLog.gcj | 4 + zlib/Makefile.in | 2 +- zlib/aclocal.m4 | 340 +++++++-------------------------- zlib/configure | 456 +++++---------------------------------------- 4 files changed, 126 insertions(+), 676 deletions(-) diff --git a/zlib/ChangeLog.gcj b/zlib/ChangeLog.gcj index f34d5c85cb3..2c9785bd393 100644 --- a/zlib/ChangeLog.gcj +++ b/zlib/ChangeLog.gcj @@ -1,3 +1,7 @@ +1999-08-02 Tom Tromey + + * aclocal.m4, configure: Rebuilt for new libtool. + 1999-07-19 Alexandre Oliva * Makefile.am (*-recursive, *-am, *-multi): Automake does not diff --git a/zlib/Makefile.in b/zlib/Makefile.in index 8a397f65f49..fd20f5f995c 100644 --- a/zlib/Makefile.in +++ b/zlib/Makefile.in @@ -75,9 +75,9 @@ LN_S = @LN_S@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ NM = @NM@ +OBJDUMP = @OBJDUMP@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ -USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@ VERSION = @VERSION@ target_all = @target_all@ zlib_basedir = @zlib_basedir@ diff --git a/zlib/aclocal.m4 b/zlib/aclocal.m4 index 24c14c5195c..9dca9e4c307 100644 --- a/zlib/aclocal.m4 +++ b/zlib/aclocal.m4 @@ -174,7 +174,7 @@ else fi]) -# serial 35 AC_PROG_LIBTOOL +# serial 40 AC_PROG_LIBTOOL AC_DEFUN(AC_PROG_LIBTOOL, [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl @@ -183,8 +183,9 @@ AC_CACHE_SAVE # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -DLLTOOL="$DLLTOOL" AS="$AS" \ +LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ +LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ +DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) @@ -215,8 +216,6 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_SYS_NM_PARSE])dnl -AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl @@ -225,10 +224,16 @@ libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen" -test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" +ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], +[libtool_flags="$libtool_flags --enable-dlopen"]) +ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +[libtool_flags="$libtool_flags --enable-win32-dll"]) +AC_ARG_ENABLE(libtool-lock, + [ --disable-libtool-lock avoid locking (might break parallel builds)]) +test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" +test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. @@ -264,33 +269,28 @@ case "$host" in fi ;; -*-*-cygwin*) - AC_SYS_LIBTOOL_CYGWIN +ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; - +]) esac - -# enable the --disable-libtool-lock switch - -AC_ARG_ENABLE(libtool-lock, -[ --disable-libtool-lock force libtool not to do file locking], -need_locks=$enableval, -need_locks=yes) - -if test x"$need_locks" = xno; then - libtool_flags="$libtool_flags --disable-lock" -fi ]) -# AC_LIBTOOL_DLOPEN - check for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes]) +# AC_LIBTOOL_DLOPEN - enable checks for dlopen support +AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) + +# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's +AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_SHARED, -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_SHARED, [dnl +define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], @@ -315,15 +315,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, -[AC_ENABLE_SHARED(no)]) +AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_STATIC, -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_STATIC, [dnl +define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], @@ -348,16 +348,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, -[AC_ENABLE_STATIC(no)]) +AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no)]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl +define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], @@ -382,9 +382,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, -[AC_ENABLE_FAST_INSTALL(no)]) - +AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no)]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN(AC_PROG_LD, @@ -402,7 +401,7 @@ if test "$ac_cv_prog_gcc" = yes; then case "$ac_prog" in # Accept absolute paths. changequote(,)dnl - /* | [A-Za-z]:[\\/]*) + [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' changequote([,])dnl # Canonicalize the path of ld @@ -428,10 +427,10 @@ else fi AC_CACHE_VAL(ac_cv_path_LD, [if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog"; then + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ac_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. @@ -476,10 +475,10 @@ AC_CACHE_VAL(ac_cv_path_NM, # Let the user override the test. ac_cv_path_NM="$NM" else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm; then + if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored @@ -503,227 +502,22 @@ AC_MSG_RESULT([$NM]) AC_SUBST(NM) ]) -# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed -# by C symbol name from nm. -AC_DEFUN(AC_SYS_NM_PARSE, +# AC_CHECK_LIBM - check for math library +AC_DEFUN(AC_CHECK_LIBM, [AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_NM])dnl -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output]) -AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe, -[# These are sane defaults that work on at least a few old systems. -# {They come from Ultrix. What could be older than Ultrix?!! ;)} - -changequote(,)dnl -# Character class describing NM global symbol codes. -ac_symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -ac_symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Define system-specific variables. -case "$host_os" in -aix*) - ac_symcode='[BCDT]' +LIBM= +case "$host" in +*-*-beos* | *-*-cygwin*) + # These system don't have libm ;; -cygwin* | mingw*) - ac_symcode='[ABCDGISTW]' +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; -hpux*) - ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" - ;; -irix*) - ac_symcode='[BCDEGRST]' - ;; -solaris*) - ac_symcode='[BDT]' +*) + AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - ac_symcode='[ABCDGISTW]' -fi -changequote([,])dnl - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'" - - # Check to see that the pipe works correctly. - ac_pipe_works=no - rm -f conftest.$ac_ext - cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then - - # Try sorting and uniquifying the output. - if sort "$ac_nlist" | uniq > "$ac_nlist"T; then - mv -f "$ac_nlist"T "$ac_nlist" - else - rm -f "$ac_nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then - if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then - cat < conftest.c -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c' - - cat <> conftest.c -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -changequote(,)dnl -lt_preloaded_symbols[] = -changequote([,])dnl -{ -EOF - sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c - cat <<\EOF >> conftest.c - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftestm.$ac_objext - ac_save_LIBS="$LIBS" - ac_save_CFLAGS="$CFLAGS" - LIBS="conftestm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if AC_TRY_EVAL(ac_link) && test -s conftest; then - ac_pipe_works=yes - else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.c >&AC_FD_CC - fi - LIBS="$ac_save_LIBS" - CFLAGS="$ac_save_CFLAGS" - else - echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC - fi - else - echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC - fi - else - echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC - fi - else - echo "$progname: failed program was:" >&AC_FD_CC - cat conftest.c >&AC_FD_CC - fi - rm -rf conftest* - - # Do not use the global_symbol_pipe unless it works. - if test "$ac_pipe_works" = yes; then - if test x"$ac_symprfx" = x"_"; then - ac_cv_sys_symbol_underscore=yes - else - ac_cv_sys_symbol_underscore=no - fi - break - else - ac_cv_sys_global_symbol_pipe= - fi -done -]) - -ac_result=yes -if test -z "$ac_cv_sys_global_symbol_pipe"; then - ac_result=no -fi -AC_MSG_RESULT($ac_result) -]) - -# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin -AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN, -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -AC_CHECK_TOOL(AS, as, false) -]) - -# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols -# with an underscore? -AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE, -[AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_SYS_NM_PARSE])dnl -AC_MSG_CHECKING([for _ prefix in compiled symbols]) -AC_CACHE_VAL(ac_cv_sys_symbol_underscore, -[ac_cv_sys_symbol_underscore=no -cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then - # See whether the symbols have a leading underscore. - if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then - ac_cv_sys_symbol_underscore=yes - else - if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then - : - else - echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC - fi - fi - else - echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC - fi -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.c >&AC_FD_CC -fi -rm -rf conftest* -]) -AC_MSG_RESULT($ac_cv_sys_symbol_underscore) -USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no} -AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, [ -AC_CHECK_LIB(mw, _mwvalidcheckl) -AC_CHECK_LIB(m, cos) ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for @@ -734,13 +528,14 @@ AC_CHECK_LIB(m, cos) # '${top_builddir}/' (note the single quotes!) if your package is not # flat, and, if you're not using automake, define top_builddir as # appropriate in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [ +AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case "$enable_ltdl_convenience" in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la + INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for @@ -752,16 +547,23 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [ # flat, and, if you're not using automake, define top_builddir as # appropriate in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [ - AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [ - case "$enable_ltdl_install" in - no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;; - "") enable_ltdl_install=yes - ac_configure_args="$ac_configure_args --enable-ltdl-install" ;; - esac +AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, main, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi ]) - if test x"$enable_ltdl_install" != x"no"; then + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la + INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + INCLTDL= fi ]) @@ -773,7 +575,7 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl -AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl -AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl -AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl + +dnl This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL])dnl diff --git a/zlib/configure b/zlib/configure index 6c2ade1cd82..8954afbf128 100755 --- a/zlib/configure +++ b/zlib/configure @@ -31,7 +31,7 @@ ac_help="$ac_help ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" ac_help="$ac_help - --disable-libtool-lock force libtool not to do file locking" + --disable-libtool-lock avoid locking (might break parallel builds)" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -1537,7 +1537,7 @@ echo "configure:1537: checking for ld used by GCC" >&5 ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. - /* | [A-Za-z]:[\\/]*) + [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` @@ -1566,10 +1566,10 @@ if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog"; then + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ac_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. @@ -1620,10 +1620,10 @@ else # Let the user override the test. ac_cv_path_NM="$NM" else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm; then + if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored @@ -1648,212 +1648,8 @@ NM="$ac_cv_path_NM" echo "$ac_t""$NM" 1>&6 -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 -echo "configure:1654: checking command to parse $NM output" >&5 -if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # These are sane defaults that work on at least a few old systems. -# {They come from Ultrix. What could be older than Ultrix?!! ;)} - -# Character class describing NM global symbol codes. -ac_symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -ac_symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Define system-specific variables. -case "$host_os" in -aix*) - ac_symcode='[BCDT]' - ;; -cygwin* | mingw*) - ac_symcode='[ABCDGISTW]' - ;; -hpux*) - ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" - ;; -irix*) - ac_symcode='[BCDEGRST]' - ;; -solaris*) - ac_symcode='[BDT]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - ac_symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'" - - # Check to see that the pipe works correctly. - ac_pipe_works=no - rm -f conftest.$ac_ext - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - # Now try to grab the symbols. - ac_nlist=conftest.nm - - if { (eval echo configure:1721: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then - - # Try sorting and uniquifying the output. - if sort "$ac_nlist" | uniq > "$ac_nlist"T; then - mv -f "$ac_nlist"T "$ac_nlist" - else - rm -f "$ac_nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then - if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then - cat < conftest.c -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c' - - cat <> conftest.c -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{ -EOF - sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c - cat <<\EOF >> conftest.c - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftestm.$ac_objext - ac_save_LIBS="$LIBS" - ac_save_CFLAGS="$CFLAGS" - LIBS="conftestm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo configure:1773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_pipe_works=yes - else - echo "configure: failed program was:" >&5 - cat conftest.c >&5 - fi - LIBS="$ac_save_LIBS" - CFLAGS="$ac_save_CFLAGS" - else - echo "cannot find nm_test_func in $ac_nlist" >&5 - fi - else - echo "cannot find nm_test_var in $ac_nlist" >&5 - fi - else - echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - rm -rf conftest* - - # Do not use the global_symbol_pipe unless it works. - if test "$ac_pipe_works" = yes; then - if test x"$ac_symprfx" = x"_"; then - ac_cv_sys_symbol_underscore=yes - else - ac_cv_sys_symbol_underscore=no - fi - break - else - ac_cv_sys_global_symbol_pipe= - fi -done - -fi - - -ac_result=yes -if test -z "$ac_cv_sys_global_symbol_pipe"; then - ac_result=no -fi -echo "$ac_t""$ac_result" 1>&6 - -echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6 -echo "configure:1819: checking for _ prefix in compiled symbols" >&5 -if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_sys_symbol_underscore=no -cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - # Now try to grab the symbols. - ac_nlist=conftest.nm - if { (eval echo configure:1831: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then - # See whether the symbols have a leading underscore. - if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then - ac_cv_sys_symbol_underscore=yes - else - if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then - : - else - echo "configure: cannot find nm_test_func in $ac_nlist" >&5 - fi - fi - else - echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5 - fi -else - echo "configure: failed program was:" >&5 - cat conftest.c >&5 -fi -rm -rf conftest* - -fi - -echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6 -USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no} - echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1857: checking whether ln -s works" >&5 +echo "configure:1653: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1873,30 +1669,32 @@ else echo "$ac_t""no" 1>&6 fi -if test $host != $build; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen" -test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + : +fi + +test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" +test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" + # Some flags need to be propagated to the compiler or linker for good # libtool support. case "$host" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1899 "configure"' > conftest.$ac_ext - if { (eval echo configure:1900: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1697 "configure"' > conftest.$ac_ext + if { (eval echo configure:1698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1917,19 +1715,19 @@ case "$host" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:1921: checking whether the C compiler needs -belf" >&5 +echo "configure:1719: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -1948,161 +1746,9 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 fi ;; -*-*-cygwin*) - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1956: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -DLLTOOL="$ac_cv_prog_DLLTOOL" -if test -n "$DLLTOOL"; then - echo "$ac_t""$DLLTOOL" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -if test -z "$ac_cv_prog_DLLTOOL"; then -if test -n "$ac_tool_prefix"; then - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1988: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL="dlltool" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false" -fi -fi -DLLTOOL="$ac_cv_prog_DLLTOOL" -if test -n "$DLLTOOL"; then - echo "$ac_t""$DLLTOOL" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -else - DLLTOOL="false" -fi -fi - -# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2023: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS="${ac_tool_prefix}as" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -AS="$ac_cv_prog_AS" -if test -n "$AS"; then - echo "$ac_t""$AS" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -if test -z "$ac_cv_prog_AS"; then -if test -n "$ac_tool_prefix"; then - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2055: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS="as" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false" -fi -fi -AS="$ac_cv_prog_AS" -if test -n "$AS"; then - echo "$ac_t""$AS" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -else - AS="false" -fi -fi - - - ;; esac -# enable the --disable-libtool-lock switch - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - need_locks=$enableval -else - need_locks=yes -fi - - -if test x"$need_locks" = xno; then - libtool_flags="$libtool_flags --disable-lock" -fi - # Save cache, so that ltconfig can load it cat > confcache <<\EOF @@ -2155,8 +1801,9 @@ rm -f confcache # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -DLLTOOL="$DLLTOOL" AS="$AS" \ +LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ +LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ +DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } @@ -2210,7 +1857,7 @@ EOF target_all=libzgcj.la else echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2214: checking how to run the C preprocessor" >&5 +echo "configure:1861: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -2225,13 +1872,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2242,13 +1889,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1899: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2259,13 +1906,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2269: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2293,17 +1940,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2297: checking for $ac_hdr" >&5 +echo "configure:1944: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1954: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2332,12 +1979,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2336: checking for $ac_func" >&5 +echo "configure:1983: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2385,7 +2032,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:2389: checking for working mmap" >&5 +echo "configure:2036: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2393,7 +2040,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2184: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -2558,12 +2205,12 @@ fi for ac_func in memcpy strerror do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2562: checking for $ac_func" >&5 +echo "configure:2209: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2613,7 +2260,7 @@ done if test "$with_system_zlib" = yes; then echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6 -echo "configure:2617: checking for deflate in -lz" >&5 +echo "configure:2264: checking for deflate in -lz" >&5 ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2621,7 +2268,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lz $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2664,17 +2311,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2668: checking for $ac_hdr" >&5 +echo "configure:2315: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2897,10 +2544,7 @@ s%@CC@%$CC%g s%@RANLIB@%$RANLIB%g s%@LD@%$LD%g s%@NM@%$NM%g -s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g s%@LN_S@%$LN_S%g -s%@DLLTOOL@%$DLLTOOL%g -s%@AS@%$AS%g s%@LIBTOOL@%$LIBTOOL%g s%@COMPPATH@%$COMPPATH%g s%@CPP@%$CPP%g