The change in major version (and the increment from Darwin19 to 20)
caused libtool tests to fail which resulted in incorrect build settings
for shared libraries.
We take this opportunity to sort out the shared undefined symbols state
rather than propagating the current unsound behaviour into a new rev.
This change means that we default to the case that missing symbols are
considered an error, and if one wants to allow this intentionally, the
confiuration for that case should be set appropriately.
Three existing cases need undefined dynamic lookup:
libitm, where there is already a configuration mechanism to add the
flags.
libcc1, where we add simple configuration to add the flags for Darwin.
libsanitizer, where we can add to the existing extra flags.
libcc1/ChangeLog:
PR target/97865
* Makefile.am: Add dynamic_lookup to LD flags for Darwin.
* configure.ac: Test for Darwin host and set a flag.
* Makefile.in: Regenerate.
* configure: Regenerate.
libitm/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin.
* configure: Regenerate.
libsanitizer/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for
Darwin.
* configure: Regenerate.
ChangeLog:
PR target/97865
* libtool.m4: Update handling of Darwin platform link flags
for Darwin20.
gcc/ChangeLog:
PR target/97865
* configure: Regenerate.
libatomic/ChangeLog:
PR target/97865
* configure: Regenerate.
libbacktrace/ChangeLog:
PR target/97865
* configure: Regenerate.
libffi/ChangeLog:
PR target/97865
* configure: Regenerate.
libgfortran/ChangeLog:
PR target/97865
* configure: Regenerate.
libgomp/ChangeLog:
PR target/97865
* configure: Regenerate.
libhsail-rt/ChangeLog:
PR target/97865
* configure: Regenerate.
libobjc/ChangeLog:
PR target/97865
* configure: Regenerate.
libphobos/ChangeLog:
PR target/97865
* configure: Regenerate.
libquadmath/ChangeLog:
PR target/97865
* configure: Regenerate.
libssp/ChangeLog:
PR target/97865
* configure: Regenerate.
libstdc++-v3/ChangeLog:
PR target/97865
* configure: Regenerate.
libvtv/ChangeLog:
PR target/97865
* configure: Regenerate.
zlib/ChangeLog:
PR target/97865
* configure: Regenerate.
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: Use scan-ltrans-tree-dump.
* lib/scanltranstree.exp: New file.
* lib/target-supports.exp (scan-ltrans-tree-dump_required_options)
(scan-ltrans-tree-dump-times_required_options)
(scan-ltrans-tree-dump-not_required_options)
(scan-ltrans-tree-dump-dem_required_options)
(scan-ltrans-tree-dump-dem-not_required_options): New proc.
* lib/gcc-dg.exp: Include scanltranstree.exp.
* testsuite/lib/libatomic.exp: Include scanltranstree.exp.
* testsuite/lib/libgomp.exp: Include scanltranstree.exp.
* testsuite/lib/libitm.exp: Include scanltranstree.exp.
* testsuite/lib/libvtv.exp: Include scanltranstree.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add ltrans-tree.
From-SVN: r259838
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: New test.
* gcc.dg/ipa/ipa-icf-38a.c: New test.
* lib/scandump.exp (dump-base): New proc.
(scan-dump, scan-dump-times, scan-dump-not, scan-dump-dem)
(scan-dump-dem-not): Add and handle parameter for suffix of the dump
base.
* lib/scanipa.exp: Add "" argument to scan-dump calls.
* lib/scanlang.exp: Same.
* lib/scanrtl.exp: Same.
* lib/scantree.exp: Same.
* lib/scanwpaipa.exp: New file.
* lib/gcc-dg.exp: Include scanwpaipa.exp.
* testsuite/lib/libatomic.exp: Include scanwpaipa.exp.
* testsuite/lib/libgomp.exp: Include scanwpaipa.exp.
* testsuite/lib/libitm.exp: Include scanwpaipa.exp.
* testsuite/lib/libvtv.exp: Include scanwpaipa.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add wpa-ipa.
From-SVN: r259837
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
PR other/79046
libatomic/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libffi/
* configure.ac: Add GCC_BASE_VER.
* include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* configure: Regenerated.
* testsuite/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* man/Makefile.in: Regenerated.
libgomp/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libitm/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libmpx/
* mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* mpxwrap/Makefile.am (gcc_version): Likewise.
* mpxrt/Makefile.in: Regenerated.
* mpxwrap/Makefile.in: Regenerated.
liboffloadmic/
* plugin/configure.ac: Add GCC_BASE_VER.
* plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* plugin/configure: Regenerated.
* plugin/aclocal.m4: Regenerated.
* plugin/Makefile.in: Regenerated.
libsanitizer/
* interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@
instead of cat to get version from BASE-VER file.
* asan/Makefile.am (gcc_version): Likewise.
* ubsan/Makefile.am (gcc_version): Likewise.
* sanitizer_common/Makefile.am (gcc_version): Likewise.
* lsan/Makefile.am (gcc_version): Likewise.
* tsan/Makefile.am (gcc_version): Likewise.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libvtv/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
From-SVN: r244742
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Fixes a compile error with both old and new obstacks due to
obstack_chunk_free having the wrong signature. Also, setting chunk
size and alignment before obstack_init is pointless since they are
overwritten.
* vtv_malloc.cc (obstack_chunk_free): Correct param type.
(__vtv_malloc_init): Use obstack_specify_allocation.
From-SVN: r229985
This patch adds an easy way to write tests for expected multiline
output. For example we can test carets and underlines for
a particular diagnostic with:
/* { dg-begin-multiline-output "" }
typedef struct _GMutex GMutex;
^~~~~~~
{ dg-end-multiline-output "" } */
multiline.exp is used by prune.exp; hence we need to load it before
prune.exp via *load_gcc_lib* for the testsuites of the various
non-"gcc" support libraries (e.g. boehm-gc).
gcc/testsuite/ChangeLog:
* lib/multiline.exp: New file.
* lib/prune.exp: Load multiline.exp.
(prune_gcc_output): Call into multiline.exp to handle any
multiline output directives.
* lib/libgo.exp: Load multiline.exp before prune.exp, using
load_gcc_lib.
boehm-gc/ChangeLog:
* testsuite/lib/boehm-gc.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libatomic/ChangeLog:
* testsuite/lib/libatomic.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libgomp/ChangeLog:
* testsuite/lib/libgomp.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libitm/ChangeLog:
* testsuite/lib/libitm.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libvtv/ChangeLog:
* testsuite/lib/libvtv.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
From-SVN: r228655
Fix PR 66521
libvtv/ChangeLog
2015-08-01 Caroline Tice <cmtice@google.com>
PR 66521
* Makefile.am: Update to match latest tree.
* Makefile.in: Regenerate.
* testsuite/lib/libvtv: Brought up to date.
* vtv_malloc.cc (VTV_DEBUG): Update function call to match renamed
function (old bug!).
* vtv_rts.cc (debug_functions, debug_init, debug_verify_vtable): Update
initializations to work correctly with VTV_DEBUG defined.
gcc/ChangeLog:
2015-08-01 Caroline Tice <cmtice@google.com>
PR 66521
* vtable-verify.c (vtbl_mangled_name_types, vtbl_mangled_name_ids): New
global variables.
(vtbl_find_mangled_name): New function.
(vtbl_register_mangled_name): New function.
(vtbl_map_get_node): If DECL_ASSEMBLER_NAME is "<anon>", look up
mangled name in mangled name vectors.
(find_or_create_vtbl_map_node): Ditto.
(var_is_used_for_virtual_call_p): Add recursion_depth parameter;
update recursion_depth on function entry; pass it to every recursive
call; automatically exit if depth > 25 (give up looking at that point).
(verify_bb_vtables): Initialize recursion_depth and pass it to
var_is_used_for_virtual_call_p.
* vtable-verify.h (vtbl_mangbled_name_types, vtbl_mangled_name_ids): New
global variable decls.
(vtbl_register_mangled_name): New extern function decl.
gcc/cp/ChangeLog:
2015-08-01 Caroline Tice <cmtice@google.com>
PR 66521
* mangle.c : Add vtable-verify.h to include files.
(get_mangled_vtable_map_var_name): If the DECL_ASSEMBLER_NAME
is "<anon>" get the real mangled name for the class instead, and
also store the real mangled name in a vector for use later.
From-SVN: r226471
Committing generated configure & Makefile.in pieces of
VTV Cygwin patch (from Patrick Wollgast). Forgot to
commit these with the rest of the patch.
From-SVN: r220254
* gcc/config/i386/cygwin.h (STARTFILE_SPEC): Add vtv_start.o,
if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw-w64.h (STARTFILE_SPEC): Likewise.
* gcc/config/i386/mingw32.h (STARTFILE_SPEC): Likewise.
* gcc/config/i386/cygwin.h (ENDFILE_SPEC): Add vtv_end.o,
if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw32.h (ENDFILE_SPEC): Likewise.
* gcc/config/i386/cygwin.h (LIB_SPEC): Pass -lvtv and -lpsapi,
if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw-w64.h (LIB_SPEC): Likewise.
* gcc/config/i386/mingw32.h (LIB_SPEC): Likewise.
* gcc/cp/vtable-class-hierarchy.c (vtv_generate_init_routine): Add
check for not TARGET_PECOFF at the VTV_PREINIT_PRIORITY checks.
* gcc/varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section in case the
target is PE or COFF.
* libgcc/Makefile.in: Move rules to build vtv_*.o out of the check
for CUSTOM_CRTSTUFF.
* libgcc/config.host (i[34567]86-*-cygwin*, x86_64-*-cygwin*, i[34567]86-*-mingw*)
(x86_64-*-mingw*): Only add vtv_*.o to extra_parts if enable_vtable_verify.
* libstdc++-v3/acinclude.m4: Define VTV_CYGMIN.
* libstdc++-v3/configure: Regenerate.
* libstdc++-v3/libsupc++/Makefile.am: Add vtv_sources only to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES if VTV_CYGMIN is
not set.
* libstdc++-v3/libsupc++/Makefile.in: Regenerated.
* libstdc++-v3/libsupc++/vtv_stubs.cc: Add none weak declaration of every
function for Cygwin and MinGW.
* libstdc++-v3/src/Makefile.am: Add libvtv.la to toolexeclib_LTLIBRARIES,
if VTV_CYGMIN is set. Define libvtv_la_SOURCES, libvtv_la_LDFLAGS,
libvtv_la_AM_CXXFLAGS and libvtv_la_LINK if VTV_CYGMIN is set.
* libstdc++-v3/src/Makefile.in: Regenerate.
* libvtv/Makefile.am : Add libvtv.la to toolexeclib_LTLIBRARIES, if VTV_CYGMIN
is set. Define libvtv_la_LIBADD, libvtv_la_LDFLAGS, libvtv_stubs_la_LDFLAGS
and libvtv_stubs_la_SOURCES if VTV_CYGMIN is set. Add obstac.c to
libvtv_la_SOURCES if VTV_CYGMIN is set.
* libvtv/Makefile.in : Regenerate.
* libvtv/aclocal.m4 : Regenerate.
* libvtv/configure : Regenerate.
* libvtv/configure.ac : Add ACX_LT_HOST_FLAGS. Define VTV_CYGMIN.
* libvtv/configure.tgt : (x86_64-*-cygwin*, i?86-*-cygwin*, x86_64-*-mingw*)
(i?86-*-mingw*): Add to supported targets.
* libvtv/vtv_fail.cc : Skip inclusion of execinfo.h on Cygwin and MinGW.
(log_error_message): Skip calls to backtrace and backtrace_symbols_fd on Cygwin
and MinGW.
* libvtv/vtv_malloc.cc : Include windows.h and skip sys/mman.h inclusion on
Cygwin and MinGW. Add sysconf port on Cygwin and MinGW.
(obstack_chunk_alloc): Exchange call to mmap with call to VirtualAlloc on Cygwin
and MinGW.
(__vtv_malloc_init): Exchange call to sysconf with call to port of sysconf on
Cygwin and MinGW.
* libvtv/vtv_malloc.h : Declare mprotect and define PROT_READ and PROT_WRITE on
Cygwin and MinGW.
* libvtv/map.h : Include stdint.h on MinGW.
* libvtv/rts.cc : Include windows.h, winternl.h and psapi.h, skip include of
execinfo.h, sys/mman.h and link.h on Cygwin and MinGW.
Add port of __fortify_fail on Cygwin and MinGW.
Change ElfW (Addr) to uintptr_t on Cygwin and MinGW.
(read_section_offset_and_length): Add port for Cygwin and MinGW
(iterate_modules): New function.
(vtv_unprotect_vtable_vars): Use iterate_modules instead of dl_iterate_phdr on
Cygwin and MinGW.
(vtv_protect_vtable_vars): Likewise.
(count_all_pages): Likewise.
(dl_iterate_phdr_count_pages): Don't build on Cygwin and MinGW.
* libvtv/utils.cc : Include windows.h and skip execinfo.h inclusion on
Cygwin and MinGW.
(__vtv_open_log): Exchange call to getuid and getpid with GetCurrentProcessId and
adjust call to snprintf accordingly on Cygwin and MinGW.
Adjust calls to mkdir on MinGW.
Adjust call to open on Cygwin and MinGW.
(__vtv_add_to_log): Adjust call to snprintf on Cygwin and MinGW.
(__vtv_log_verification_failure): Don't generate a backtrace on Cygwin and MinGW.
From-SVN: r220232
Jakub Jelinek
GCC Administrator
Samuel Thibault
Iain Sandoe
John David Anglin
H.J. Lu
Maciej W. Rozycki
Jakub Jelinek
Caroline Tice
Joseph Myers
Martin Liska
Tom de Vries
H.J. Lu
David Malcolm
Igor Tsimbalist
Matthias Klose
Rainer Orth
Matthias Klose
Alan Modra
Ramana Radhakrishnan
Michael Haubenwallner
Thomas Schwinge
Kyrylo Tkachov
H.J. Lu
Francois-Xavier Coudert
Gerald Pfeifer
Alan Modra