ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Enable building libgcc with CET options by default on Linux/x86 if
binutils supports CET v2.0. It can be disabled with --disable-cet.
It is an error to configure GCC with --enable-cet if bintuiils
doesn't support CET v2.0.
ENDBR instruction is added to __morestack_large_model since it is
called indirectly.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
config/
* cet.m4: New file.
gcc/
* config.gcc (extra_headers): Add cet.h for x86 targets.
* config/i386/cet.h: New file.
* doc/install.texi: Add --enable-cet/--disable-cet.
libgcc/
* Makefile.in (configure_deps): Add $(srcdir)/../config/cet.m4.
(CET_FLAGS): New.
* config/i386/morestack.S: Include <cet.h>.
(__morestack_large_model): Add _CET_ENDBR at function entrance.
* config/i386/resms64.h: Include <cet.h>.
* config/i386/resms64f.h: Likewise.
* config/i386/resms64fx.h: Likewise.
* config/i386/resms64x.h: Likewise.
* config/i386/savms64.h: Likewise.
* config/i386/savms64f.h: Likewise.
* config/i386/t-linux (HOST_LIBGCC2_CFLAGS): Add $(CET_FLAGS).
(CRTSTUFF_T_CFLAGS): Likewise.
* configure.ac: Include ../config/cet.m4.
Set and substitute CET_FLAGS.
* configure: Regenerated.
From-SVN: r254868
Unlike bootstrap-debug, bootstrap-debug-lean used to pass compare using
the traditional compare command, because it compiled both stage2 and
stage3 with options that used to generate identical output
(-fcompare-debug= in stage2 vs -fcompare-debug in stage3).
Since we started adding relevant command-line flags to DW_AT_producer,
this is no longer the case, and stages 2 and 3 object files that differ
in nothing but the DW_AT_producer strings.
-fcompare-debug is short for -fcompare-debug=-gtoggle, so stage3
compiles twice, once with the normal options, once with toggled -g, to
then compare the temporary final dumps. When enabled, both compilations
get from the driver an additional -frandom-seed flag (if none is given
explicitly).
-fcompare-debug= is short for -fno-compare-debug, disabling the second
compilation.
The difference between the DW_AT_producer lines are the different
-fcompare-debug flags, and the presence of the -frandom-seed flag in the
stage3 compilation.
It is easy and sensible enough to filter the -fcompare-debug flags out
of the DW_AT_producer string. This option should never affect the
compilation output, it just determines whether or not to perform an
additional compilation that should produce the same executable output.
However, dropping -frandom-seed is not quite correct, in that it might
have other consequences on the compilation. So, it makes little sense
to make the effort to drop it when it's implicit; for those comparing
compiler output differences, it might even hint at what causes, and
could fix, difficult to explain differences, namely, explicitly
supplying -frandom-seed options.
They don't seem to matter for compiler bootstraps, though, at least
for now, so we can safely refrain from issuing -frandom-seed (or maybe
we already issue it where needed :-), and then, for
bootstrap-debug-lean, use the compare-debug script, that strips out
debug information before comparing the object files.
for config/ChangeLog
* bootstrap-debug-lean.mk (do-compare): Use the
contrib/compare-debug script.
for gcc/ChangeLog
* dwarf2out.c (gen_producer_string): Discard
OPT_fcompare_debug.
From-SVN: r254750
Bootstrap GCC with Intel CET by configuring GCC with
--with-build-config="bootstrap-cet bootstrap-debug"
Tested on Linux/i686 and Linux/x86-64.
config/
* bootstrap-cet.mk: New file.
gcc/
* doc/install.texi: Document bootstrap-cet.
From-SVN: r254043
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
<toplevel>
* configure.ac: Don't use pkg-config to check for bdw-gc.
* configure: Regenerate.
config/
* pkg.m4: Remove.
libobjc/
* configure.ac: Don't use pkg-config to check for bdw-gc.
* configure: Regenerate.
gcc/
* doc/install.texi: Don't use pkg-config to check for bdw-gc.
From-SVN: r243108
The patch disables all fuse-*.c tests when configuring gcc with isl 0.14 or earlier.
ChangeLog:
* Makefile.in: Regenerate.
* Makefile.tpl: Export ISLVER.
* configure: Regenerate.
* config/isl.m4: Detect isl-0.15.
gcc/
* Makefile.in: Set ISLVER in site.exp.
gcc/testsuite/
* gcc.dg/graphite/graphite.exp: Only run the fuse-*.c tests with isl-0.15.
Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r232811
we check for a the isl compute timeout function added in isl 0.13.
That means GCC could still be configured with isl 0.13, 0.14, and 0.15.
* config/isl.m4 (ISL_CHECK_VERSION): Check for
isl_ctx_get_max_operations.
* configure: Regenerate.
gcc/
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Remove checks for functions that exist in isl 0.13 or
later.
* graphite-isl-ast-to-gimple.c: Remove #ifdefs and code for isl 0.12.
* graphite-optimize-isl.c: Same.
* graphite-poly.c: Same.
* graphite-sese-to-poly.c: Same.
* graphite.h: Add comment for isl 0.14.
* toplev.c (print_version): Print isl version.
Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r231706
gcc/
* asan.c (asan_emit_stack_protection): Don't pass local stack to
asan_stack_malloc_[n] anymore. Check if asan_stack_malloc_[n] returned
NULL and use local stack than.
(asan_finish_file): Insert __asan_version_mismatch_check_v[n] call
in addition to __asan_init.
* sanitizer.def (BUILT_IN_ASAN_INIT): Rename to __asan_init.
(BUILT_IN_ASAN_VERSION_MISMATCH_CHECK): Add new builtin call.
* asan.h (asan_intercepted_p): Handle new string builtins.
* ubsan.c (ubsan_use_new_style_p): New function.
(ubsan_instrument_float_cast): If location is unknown, assign
input_location to loc. Propagate loc to ubsan_create_data if
ubsan_use_new_style_p returned true.
config/
* bootstrap-asan.mk: Replace ASAN_OPTIONS=detect_leaks with
LSAN_OPTIONS=detect_leaks.
gcc/testsuite/
* c-c++-common/ubsan/float-cast-overflow-10.c: Adjust test.
* c-c++-common/ubsan/float-cast-overflow-8.c: Likewise.
* c-c++-common/ubsan/float-cast-overflow-9.c: Likewise.
* g++.dg/asan/default-options-1.C: Likewise.
From-SVN: r229112
(The previous iconv-related commit missed the config/iconv.m4 change.)
Original description:
This is the second in a series of patches to make a build with an
in-tree GNU libiconv work as designed.
Currently GDB is the only toolchain component which actually uses an
in-tree libiconv. This patch modifies the common AM_ICONV to use an
in-tree libiconv when present and not already provided by libc.
(GDB's workaround uses an in-tree libiconv even when libc provides
iconv(3); I'm not sure when or why that would be desirable.)
config/ChangeLog:
2015-08-24 Yaakov Selkowitz <yselkowi@redhat.com>
* iconv.m4 (AM_ICONV_LINK): Use in-tree libiconv when present.
---
config/ChangeLog | 4 +++
config/iconv.m4 | 47 +++++++++++++++++++++------
4 files changed, 112 insertions(+), 36 deletions(-)
diff --git a/config/iconv.m4 b/config/iconv.m4
index c5f3579..5f9304a 100644
--- a/config/iconv.m4
+++ b/config/iconv.m4
@@ -7,6 +7,7 @@ dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl From Bruno Haible.
+dnl with modifications to support building with in-tree libiconv
AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
[
@@ -28,24 +29,51 @@ AC_DEFUN([AM_ICONV_LINK],
dnl accordingly.
AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
+ dnl Add $INCICONV to CPPFLAGS before performing the first check,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. This first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCICONV"
AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
[iconv_t cd = iconv_open("","");
iconv(cd,NULL,NULL,NULL,NULL);
iconv_close(cd);],
am_cv_func_iconv=yes)
+ CPPFLAGS="$am_save_CPPFLAGS"
+
+ if test "$am_cv_func_iconv" != yes && test -d ../libiconv; then
+ for _libs in .libs _libs; do
+ am_save_CPPFLAGS="$CPPFLAGS"
+ am_save_LIBS="$LIBS"
+ CPPFLAGS="$CPPFLAGS -I../libiconv/include"
+ LIBS="$LIBS ../libiconv/lib/$_libs/libiconv.a"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ INCICONV="-I../libiconv/include"
+ LIBICONV='${top_builddir}'/../libiconv/lib/$_libs/libiconv.a
+ LTLIBICONV='${top_builddir}'/../libiconv/lib/libiconv.la
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBS="$am_save_LIBS"
+ if test "$am_cv_func_iconv" = "yes"; then
+ break
+ fi
+ done
+ fi
+
if test "$am_cv_func_iconv" != yes; then
+ am_save_CPPFLAGS="$CPPFLAGS"
am_save_LIBS="$LIBS"
+ CPPFLAGS="$LIBS $INCICONV"
LIBS="$LIBS $LIBICONV"
AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
@@ -54,6 +82,7 @@ AC_DEFUN([AM_ICONV_LINK],
iconv_close(cd);],
am_cv_lib_iconv=yes
am_cv_func_iconv=yes)
+ CPPFLAGS="$am_save_CPPFLAGS"
LIBS="$am_save_LIBS"
fi
])
@@ -61,12 +90,10 @@ AC_DEFUN([AM_ICONV_LINK],
AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
fi
if test "$am_cv_lib_iconv" = yes; then
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
AC_MSG_CHECKING([how to link with libiconv])
AC_MSG_RESULT([$LIBICONV])
else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
LIBICONV=
LTLIBICONV=
fi
--
1.9.3
From-SVN: r227118
Patch in the bottom adds support of IA MCU psABI to libgcc (enables
soft-fp) and libdecnumber (enables it for IA MCU).
config/
* dfp.m4 (enable_decimal_float): Also set to yes for
i?86*-*-elfiamcu target.
gcc/
* configure: Regenerated.
libdecnumber/
* configure: Regenerated.
libgcc/
* config.host: Support i[34567]86-*-elfiamcu target.
* config/t-softfp-sfdftf: New file.
* config/i386/32/t-iamcu: Likewise.
* configure: Regenerated.
From-SVN: r225198
Using a named bitfield with a width more than 0 means we won't hit
weirdness caused by the bitfield not really needing to exist. Changing
int to long long means we won't have trouble with some arch where size
of int is 1 or 2.
libobjc/ChangeLog:
2015-05-04 Trevor Saunders <tbsaunde+gcc@tbsaunde.org>
* configure: Regenerate.
config/ChangeLog:
2015-05-04 Trevor Saunders <tbsaunde+gcc@tbsaunde.org>
* bitfields.m4: Change int to long long, and use bitfields of
width 1 instead of 0.
From-SVN: r222794
PR target/65351
config/
* mh-darwin: Only apply -mdynamic-no-pic for m32 Darwin when the compiler in
use supports -mno-dynamic-no-pic.
* picflag.m4: Only append -mno-dynamic-no-pic for Darwin when -mdynamic-no-pic
is present in CFLAGS.
libiberty/
* configure: Regenerate.
libada/
* configure: Regenerate.
libgcc/
* configure: Regenerate.
gcc/
* configure: Regenerate.
Co-Authored-By: Iain Sandoe <iain@codesourcery.com>
From-SVN: r221967
config/ChangeLog:
PR bootstrap/65537
* bootstrap-lto-noplugin.mk: New build configuration.
gcc/ChangeLog:
PR bootstrap/65537
* doc/install.texi (Building a native compiler): Document new
bootstrap-lto-noplugin configuration. Mention that bootstrap-lto
configuration assumes that the host supports the linker plugin.
From-SVN: r221667
Igor Tsimbalist
Eric Botcazou
Boris Kolpackov
Alexandre Oliva
H.J. Lu
Martin Liska
Richard Biener
Uros Bizjak
Uros Bizjak
Jakub Jelinek
Rainer Orth
Alan Modra
Alan Modra
Maxim Ostapenko
Ma Jiang
Matthias Klose
Matthias Klose
Trevor Saunders
Oleg Endo
Sebastian Pop
Aditya Kumar
Nathan Sidwell
Max Ostapenko
Yaakov Selkowitz
Jeff Law
Jason Merrill
Jason Merrill
Trevor Saunders
H.J. Lu
Thomas Schwinge
Jack Howarth