In 5.2, a map clause can be map-entering or map-exiting,
either containing 'tofrom'. The main reason for this is
permit 'map(x)' with 'omp target enter/exit data',
avoiding to specify 'to:/from:' explicitly. (OpenMP
defaults to 'tofrom'.)
gcc/c/ChangeLog:
* c-parser.cc (c_parser_omp_target_enter_data,
c_parser_omp_target_exit_data): Accept tofrom
map-type modifier but use 'to' / 'from' internally.
gcc/cp/ChangeLog:
* parser.cc (cp_parser_omp_target_enter_data,
cp_parser_omp_target_exit_data): Accept tofrom
map-type modifier but use 'to' / 'from' internally.
gcc/fortran/ChangeLog:
* dump-parse-tree.cc (show_omp_namelist): For the map-type,
also handle the always modifer and release/delete.
* openmp.cc (resolve_omp_clauses): Accept tofrom
map-type modifier for target enter/exit data,
but use 'to' / 'from' internally.
libgomp/ChangeLog:
* libgomp.texi (OpenMP 5.2): Mark target enter/exit data
with fromto as implemented.
gcc/testsuite/ChangeLog:
* c-c++-common/gomp/target-data-2.c: New test.
* c-c++-common/gomp/target-data-3.c: New test.
* gfortran.dg/gomp/target-data-1.f90: New test.
* gfortran.dg/gomp/target-data-2.f90: New test.
The i variable is used inside of the parallel in:
#pragma omp simd safelen(32) private (v)
for (i = 0; i < 64; i++)
{
v = 3 * i;
ll[i] = u1 + v * u2[0] + u2[1] + x + y[0] + y[1] + v + h[0] + u3[i];
}
where i is predetermined linear (so while inside of the body
it is safe, private per SIMD lane var) the final value is written to
the shared variable, and in:
for (i = 0; i < 64; i++)
if (ll[i] != u1 + 3 * i * u2[0] + u2[1] + x + y[0] + y[1] + 3 * i + 13 + 14 + i)
#pragma omp atomic write
err = 1;
which is a normal loop and so it isn't in any way privatized there.
So we have a data race, fixed by adding private (i) clause to the
parallel.
2022-06-21 Jakub Jelinek <jakub@redhat.com>
Paul Iannetta <piannetta@kalrayinc.com>
PR libgomp/106045
* testsuite/libgomp.c/target-31.c: Add private (i) clause.
On Tue, Jun 14, 2022 at 06:41:37PM +0200, Thomas Schwinge wrote:
> In an offloading configuration, I'm seeing:
>
> PASS: libgomp.fortran/get-mapped-ptr-1.f90 -O (test for excess errors)
> [-PASS:-]{+FAIL:+} libgomp.fortran/get-mapped-ptr-1.f90 -O execution test
>
> Does that one need similar treatment?
I assume not just that but libgomp.c-c++-common/get-mapped-ptr-1.c too?
It both needs the same treatment, and in the get-mapped-ptr-1.c
case there is even UB, while the Fortran version was using c_loc (q)
as the host pointer, in C/C++ it was using q which was value of
uninitialized pointer.
2022-06-15 Jakub Jelinek <jakub@redhat.com>
* testsuite/libgomp.c-c++-common/get-mapped-ptr-1.c (main): Initialize
q to ddress of an automatic variable. Use -5 instead of -1 in
omp_get_mapped_ptr call. Add test with omp_initial_device.
* testsuite/libgomp.fortran/get-mapped-ptr-1.f90 (main): Use -5 instead
of -1 in omp_get_mapped_ptr call. Add test with omp_initial_device.
Renumber stop arguments afterwards.
OpenMP 5.2 changed once more what device numbers are allowed.
In 5.1, valid device numbers were [0, omp_get_num_devices()].
5.2 makes also -1 valid (calls it omp_initial_device), which is equivalent
in behavior to omp_get_num_devices() number but has the advantage that it
is a constant. And it also introduces omp_invalid_device which is
also a constant with implementation defined value < -1. That value should
act like sNaN, any time any device construct (GOMP_target*) or OpenMP runtime
API routine is asked for such a device, the program is terminated.
And if OMP_TARGET_OFFLOAD=mandatory, all non-conforming device numbers (which
is all but [-1, omp_get_num_devices()] other than omp_invalid_device)
must be treated like omp_invalid_device.
For device constructs, we have a compatibility problem, we've historically
used 2 magic negative values to mean something special.
GOMP_DEVICE_ICV (-1) means device clause wasn't present, pick the
omp_get_default_device () number
GOMP_DEVICE_FALLBACK (-2) means the host device (this is used e.g. for
#pragma omp target if (cond)
where if cond is false, we pass -2
But 5.2 requires that omp_initial_device is -1 (there were discussions
about it, advantage of -1 is that one can say iterate over the
[-1, omp_get_num_devices()-1] range to get all devices starting with
the host/initial one.
And also, if user passes -2, unless it is omp_invalid_device, we need to
treat it like non-conforming with OMP_TARGET_OFFLOAD=mandatory.
So, the patch does on the compiler side some number remapping,
user_device_num >= -2U ? user_device_num - 1 : user_device_num.
This remapping is done at compile time if device clause has constant
argument, otherwise at runtime, and means that for user -1 (omp_initial_device)
we pass -2 to GOMP_* in the runtime library where it treats it like host
fallback, while -2 is remapped to -3 (one of the non-conforming device numbers,
for those it doesn't matter which one is which).
omp_invalid_device is then -4.
For the OpenMP device runtime APIs, no remapping is done.
This patch doesn't deal with the initial default-device-var for
OMP_TARGET_OFFLOAD=mandatory , the spec says that the inital ICV value
for that should in that case depend on whether there are any offloading
devices or not (if not, should be omp_invalid_device), but that means
we can't determine the number of devices lazily (and let libraries have the
possibility to register their offloading data etc.).
2022-06-13 Jakub Jelinek <jakub@redhat.com>
gcc/
* omp-expand.cc (expand_omp_target): Remap user provided
device clause arguments, -1 to -2 and -2 to -3, either
at compile time if constant, or at runtime.
include/
* gomp-constants.h (GOMP_DEVICE_INVALID): Define.
libgomp/
* omp.h.in (omp_initial_device, omp_invalid_device): New enumerators.
* omp_lib.f90.in (omp_initial_device, omp_invalid_device): New
parameters.
* omp_lib.h.in (omp_initial_device, omp_invalid_device): Likewise.
* target.c (resolve_device): Add remapped argument, handle
GOMP_DEVICE_ICV only if remapped is true (and clear remapped),
for negative values, treat GOMP_DEVICE_FALLBACK as fallback only
if remapped, otherwise treat omp_initial_device that way. For
omp_invalid_device, always emit gomp_fatal, even when
OMP_TARGET_OFFLOAD isn't mandatory.
(GOMP_target, GOMP_target_ext, GOMP_target_data, GOMP_target_data_ext,
GOMP_target_update, GOMP_target_update_ext,
GOMP_target_enter_exit_data): Pass true as remapped argument to
resolve_device.
(omp_target_alloc, omp_target_free, omp_target_is_present,
omp_target_memcpy_check, omp_target_associate_ptr,
omp_target_disassociate_ptr, omp_get_mapped_ptr,
omp_target_is_accessible): Pass false as remapped argument to
resolve_device. Treat omp_initial_device the same as
gomp_get_num_devices (). Don't bypass resolve_device calls if
device_num is negative.
(omp_pause_resource): Treat omp_initial_device the same as
gomp_get_num_devices (). Call resolve_device.
* icv-device.c (omp_set_default_device): Always set to device_num
even when it is negative.
* libgomp.texi: Document that Conforming device numbers,
omp_initial_device and omp_invalid_device is implemented.
* testsuite/libgomp.c/target-41.c (main): Add test with
omp_initial_device.
* testsuite/libgomp.c/target-45.c: New test.
* testsuite/libgomp.c/target-46.c: New test.
* testsuite/libgomp.c/target-47.c: New test.
* testsuite/libgomp.c-c++-common/target-is-accessible-1.c (main): Add
test with omp_initial_device. Use -5 instead of -1 for negative value
test.
* testsuite/libgomp.fortran/target-is-accessible-1.f90 (main):
Likewise. Reorder stop numbers.
On Thu, Jun 09, 2022 at 12:11:28PM +0200, Thomas Schwinge wrote:
> > This patch adds support for dlopening libmemkind.so
>
> Instead of 'dlopen'ing literally 'libmemkind.so':
> ..., shouldn't this instead 'dlopen' 'libmemkind.so.0'? At least for
> Debian/Ubuntu, the latter ('libmemkind.so.0') is shipped in the "library"
> package:
I agree and I've actually noticed it too right before committing, but I thought
I'll investigate and tweak incrementally because "libmemkind.so"
is what I've actually tested (it is what llvm libomp uses).
Here is the now tested incremental fix.
2022-06-10 Jakub Jelinek <jakub@redhat.com>
* allocator.c (gomp_init_memkind): Call dlopen with "libmemkind.so.0"
rather than "libmemkind.so".
That means, exposing to the user only the '--without-cuda-driver' behavior:
including the GCC-shipped 'include/cuda/cuda.h' (not system <cuda.h>), and
'dlopen'ing the CUDA Driver library (not linking it).
For development purposes, the libgomp nvptx plugin developer may still manually
override that, to get the previous '--with-cuda-driver' behavior.
libgomp/
* plugin/Makefrag.am: Evaluate 'if PLUGIN_NVPTX_DYNAMIC' to true.
* plugin/configfrag.ac (--with-cuda-driver)
(--with-cuda-driver-include, --with-cuda-driver-lib)
(CUDA_DRIVER_INCLUDE, CUDA_DRIVER_LIB, PLUGIN_NVPTX_CPPFLAGS)
(PLUGIN_NVPTX_LDFLAGS, PLUGIN_NVPTX_LIBS, PLUGIN_NVPTX_DYNAMIC):
Remove.
* testsuite/libgomp-test-support.exp.in (cuda_driver_include)
(cuda_driver_lib): Remove.
* testsuite/lib/libgomp.exp (libgomp_init): Don't consider these.
* Makefile.in: Regenerate.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
As reported by Richard Sandiford, #include "../../../allocator.c"
has one too many ../s, dunno why it worked for me when using
../configure (VPATH = ../../../libgomp)
2022-06-09 Jakub Jelinek <jakub@redhat.com>
* config/linux/allocator.c: Fix up #include directive.
This patch adds support for dlopening libmemkind.so on Linux and uses it
for some kinds of allocations (but not yet e.g. pinned memory).
2022-06-09 Jakub Jelinek <jakub@redhat.com>
* allocator.c: Include dlfcn.h if LIBGOMP_USE_MEMKIND is defined.
(enum gomp_memkind_kind): New type.
(struct omp_allocator_data): Add memkind field if LIBGOMP_USE_MEMKIND
is defined.
(struct gomp_memkind_data): New type.
(memkind_data, memkind_data_once): New variables.
(gomp_init_memkind, gomp_get_memkind): New functions.
(omp_init_allocator): Initialize data.memkind, don't fail for
omp_high_bw_mem_space if libmemkind supports it.
(omp_aligned_alloc, omp_free, omp_aligned_calloc, omp_realloc): Add
memkind support of LIBGOMP_USE_MEMKIND is defined.
* config/linux/allocator.c: New file.
Fortran commit to C/C++/backend commit
r13-862-gf38b20d68fade5a922b9f68c4c3841e653d1b83c
gcc/fortran/ChangeLog:
* openmp.cc (OMP_SCOPE_CLAUSES): Add firstprivate and allocate.
libgomp/ChangeLog:
* libgomp.texi (OpenMP 5.2): Mark scope w/ firstprivate/allocate as Y.
* testsuite/libgomp.fortran/scope-2.f90: New test.
gcc/testsuite/ChangeLog:
* gfortran.dg/gomp/scope-5.f90: New test.
* gfortran.dg/gomp/scope-6.f90: New test.
This patch adds support to gcc's diagnostic subsystem for emitting
diagnostics in SARIF, aka the Static Analysis Results Interchange Format:
https://sarifweb.azurewebsites.net/
by extending -fdiagnostics-format= to add two new options:
-fdiagnostics-format=sarif-stderr
and:
-fdiagnostics-format=sarif-file
The patch targets SARIF v2.1.0
This is a JSON-based format suited for capturing the results of static
analysis tools (like GCC's -fanalyzer), but it can also be used for plain
GCC warnings and errors.
SARIF supports per-event metadata in diagnostic paths such as
["acquire", "resource"] and ["release", "lock"] (specifically, the
threadFlowLocation "kinds" property: SARIF v2.1.0 section 3.38.8), so
the patch extends GCC"s diagnostic_event subclass with a "struct meaning"
with similar purpose. The patch implements this for -fanalyzer so that
the various state-machine-based warnings set these in the SARIF output.
The heart of the implementation is in the new file
diagnostic-format-sarif.cc. Much of the rest of the patch is interface
classes, isolating the diagnostic subsystem (which has no knowledge of
e.g. tree or langhook) from the "client" code in the compiler proper
cc1 etc).
The patch adds a langhook for specifying the SARIF v2.1.0
"artifact.sourceLanguage" property, based on the list in
SARIF v2.1.0 Appendix J.
The patch adds automated DejaGnu tests to our testsuite via new
scan-sarif-file and scan-sarif-file-not directives (although these
merely use regexps, rather than attempting to use a proper JSON parser).
I've tested the patch by hand using the validator at:
https://sarifweb.azurewebsites.net/Validation
and the react-based viewer at:
https://microsoft.github.io/sarif-web-component/
which successfully shows most of the information (although not paths,
and not CWE IDs), and I've fixed all validation errors I've seen (though
bugs no doubt remain).
I've also tested the generated SARIF using the VS Code extension linked
to from the SARIF website; I'm a novice with VS Code, but it seems to be
able to handle my generated SARIF files (e.g. showing the data in the
SARIF tab, and showing squiggly underlines under issues, and when I
click on them, it visualizes the events in the path inline within the
source window).
Has anyone written an Emacs mode for SARIF files? (pretty please)
gcc/ChangeLog:
* Makefile.in (OBJS): Add tree-diagnostic-client-data-hooks.o and
tree-logical-location.o.
(OBJS-libcommon): Add diagnostic-format-sarif.o; reorder.
(CFLAGS-tree-diagnostic-client-data-hooks.o): Add TARGET_NAME.
* common.opt (fdiagnostics-format=): Add sarif-stderr and sarif-file.
(sarif-stderr, sarif-file): New enum values.
* diagnostic-client-data-hooks.h: New file.
* diagnostic-format-sarif.cc: New file.
* diagnostic-path.h (enum diagnostic_event::verb): New enum.
(enum diagnostic_event::noun): New enum.
(enum diagnostic_event::property): New enum.
(struct diagnostic_event::meaning): New struct.
(diagnostic_event::get_logical_location): New vfunc.
(diagnostic_event::get_meaning): New vfunc.
(simple_diagnostic_event::get_logical_location): New vfunc impl.
(simple_diagnostic_event::get_meaning): New vfunc impl.
* diagnostic.cc: Include "diagnostic-client-data-hooks.h".
(diagnostic_initialize): Initialize m_client_data_hooks.
(diagnostic_finish): Clean up m_client_data_hooks.
(diagnostic_event::meaning::dump_to_pp): New.
(diagnostic_event::meaning::maybe_get_verb_str): New.
(diagnostic_event::meaning::maybe_get_noun_str): New.
(diagnostic_event::meaning::maybe_get_property_str): New.
(get_cwe_url): Make non-static.
(diagnostic_output_format_init): Handle
DIAGNOSTICS_OUTPUT_FORMAT_SARIF_STDERR and
DIAGNOSTICS_OUTPUT_FORMAT_SARIF_FILE.
* diagnostic.h (enum diagnostics_output_format): Add
DIAGNOSTICS_OUTPUT_FORMAT_SARIF_STDERR and
DIAGNOSTICS_OUTPUT_FORMAT_SARIF_FILE.
(class diagnostic_client_data_hooks): New forward decl.
(class logical_location): New forward decl.
(diagnostic_context::m_client_data_hooks): New field.
(diagnostic_output_format_init_sarif_stderr): New decl.
(diagnostic_output_format_init_sarif_file): New decl.
(get_cwe_url): New decl.
* doc/invoke.texi (-fdiagnostics-format=): Add sarif-stderr and
sarif-file.
* doc/sourcebuild.texi (Scan a particular file): Add
scan-sarif-file and scan-sarif-file-not.
* langhooks-def.h (lhd_get_sarif_source_language): New decl.
(LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): New macro.
(LANG_HOOKS_INITIALIZER): Add
LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE.
* langhooks.cc (lhd_get_sarif_source_language): New.
* langhooks.h (lang_hooks::get_sarif_source_language): New field.
* logical-location.h: New file.
* plugin.cc (struct for_each_plugin_closure): New.
(for_each_plugin_cb): New.
(for_each_plugin): New.
* plugin.h (for_each_plugin): New decl.
* tree-diagnostic-client-data-hooks.cc: New file.
* tree-diagnostic.cc: Include "diagnostic-client-data-hooks.h".
(tree_diagnostics_defaults): Populate m_client_data_hooks.
* tree-logical-location.cc: New file.
* tree-logical-location.h: New file.
gcc/ada/ChangeLog:
* gcc-interface/misc.cc (gnat_get_sarif_source_language): New.
(LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine.
gcc/analyzer/ChangeLog:
* checker-path.cc (checker_event::get_meaning): New.
(function_entry_event::get_meaning): New.
(state_change_event::get_desc): Add dump of meaning of the event
to the -fanalyzer-verbose-state-changes output.
(state_change_event::get_meaning): New.
(cfg_edge_event::get_meaning): New.
(call_event::get_meaning): New.
(return_event::get_meaning): New.
(start_consolidated_cfg_edges_event::get_meaning): New.
(warning_event::get_meaning): New.
* checker-path.h: Include "tree-logical-location.h".
(checker_event::checker_event): Construct m_logical_loc.
(checker_event::get_logical_location): New.
(checker_event::get_meaning): New decl.
(checker_event::m_logical_loc): New.
(function_entry_event::get_meaning): New decl.
(state_change_event::get_meaning): New decl.
(cfg_edge_event::get_meaning): New decl.
(call_event::get_meaning): New decl.
(return_event::get_meaning): New decl.
(start_consolidated_cfg_edges_event::get_meaning): New.
(warning_event::get_meaning): New decl.
* pending-diagnostic.h: Include "diagnostic-path.h".
(pending_diagnostic::get_meaning_for_state_change): New vfunc.
* sm-file.cc (file_diagnostic::get_meaning_for_state_change): New
vfunc impl.
* sm-malloc.cc (malloc_diagnostic::get_meaning_for_state_change):
Likewise.
* sm-sensitive.cc
(exposure_through_output_file::get_meaning_for_state_change):
Likewise.
* sm-taint.cc (taint_diagnostic::get_meaning_for_state_change):
Likewise.
* varargs.cc
(va_list_sm_diagnostic::get_meaning_for_state_change): Likewise.
gcc/c/ChangeLog:
* c-lang.cc (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine.
(c_get_sarif_source_language): New.
* c-tree.h (c_get_sarif_source_language): New decl.
gcc/cp/ChangeLog:
* cp-lang.cc (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine.
(cp_get_sarif_source_language): New.
gcc/d/ChangeLog:
* d-lang.cc (d_get_sarif_source_language): New.
(LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine.
gcc/fortran/ChangeLog:
* f95-lang.cc (gfc_get_sarif_source_language): New.
(LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine.
gcc/go/ChangeLog:
* go-lang.cc (go_get_sarif_source_language): New.
(LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine.
gcc/objc/ChangeLog:
* objc-act.h (objc_get_sarif_source_language): New decl.
* objc-lang.cc (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine.
(objc_get_sarif_source_language): New.
gcc/testsuite/ChangeLog:
* c-c++-common/diagnostic-format-sarif-file-1.c: New test.
* c-c++-common/diagnostic-format-sarif-file-2.c: New test.
* c-c++-common/diagnostic-format-sarif-file-3.c: New test.
* c-c++-common/diagnostic-format-sarif-file-4.c: New test.
* gcc.dg/analyzer/file-meaning-1.c: New test.
* gcc.dg/analyzer/malloc-meaning-1.c: New test.
* gcc.dg/analyzer/malloc-sarif-1.c: New test.
* gcc.dg/plugin/analyzer_gil_plugin.c
(gil_diagnostic::get_meaning_for_state_change): New vfunc impl.
* gcc.dg/plugin/diagnostic-test-paths-5.c: New test.
* gcc.dg/plugin/plugin.exp (plugin_test_list): Add
diagnostic-test-paths-5.c to tests for
diagnostic_plugin_test_paths.c.
* lib/gcc-dg.exp: Load scansarif.exp.
* lib/scansarif.exp: New test.
libatomic/ChangeLog:
* testsuite/lib/libatomic.exp: Add load_gcc_lib of scansarif.exp.
libgomp/ChangeLog:
* testsuite/lib/libgomp.exp: Add load_gcc_lib of scansarif.exp.
libitm/ChangeLog:
* testsuite/lib/libitm.exp: Add load_gcc_lib of scansarif.exp.
libphobos/ChangeLog:
* testsuite/lib/libphobos-dg.exp: Add load_gcc_lib of scansarif.exp.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
OpenMP 5.2 adds support for firstprivate and allocate clauses on the scope
construct and this patch adds that support to GCC.
5.2 unfortunately (IMNSHO mistakenly) marked scope construct as worksharing,
which implies that it isn't possible to nest inside of it other scope,
worksharing loop, sections, explicit barriers, single etc. which would
make scope far less useful. I'm not implementing that part, keeping the
5.1 behavior here, and will file an issue to revert that for OpenMP 6.0.
But, for firstprivate it keeps the restriction that is now implied from
worksharing construct that listed var can't be private in outer context,
where for reduction 5.1 had similar restriction explicit even for scope
and 5.2 has it implicitly through worksharing construct.
2022-05-31 Jakub Jelinek <jakub@redhat.com>
gcc/
* omp-low.cc (build_outer_var_ref): For code == OMP_CLAUSE_ALLOCATE
allow var to be private in the outer context.
(lower_private_allocate): Pass OMP_CLAUSE_ALLOCATE as last argument
to build_outer_var_ref.
gcc/c/
* c-parser.cc (OMP_SCOPE_CLAUSE_MASK): Add firstprivate and allocate
clauses.
gcc/cp/
* parser.cc (OMP_SCOPE_CLAUSE_MASK): Add firstprivate and allocate
clauses.
gcc/testsuite/
* c-c++-common/gomp/scope-5.c: New test.
* c-c++-common/gomp/scope-6.c: New test.
* g++.dg/gomp/attrs-1.C (bar): Add firstprivate and allocate clauses
to scope construct.
* g++.dg/gomp/attrs-2.C (bar): Likewise.
libgomp/
* testsuite/libgomp.c-c++-common/allocate-1.c (foo): Add testcase for
scope construct with allocate clause.
* testsuite/libgomp.c-c++-common/allocate-3.c (foo): Likewise.
* testsuite/libgomp.c-c++-common/scope-2.c: New test.
since apparently _aligned_malloc requires freeing with _aligned_free and:
/* Defined if gomp_aligned_alloc doesn't use fallback version
and free can be used instead of gomp_aligned_free. */
#define GOMP_HAVE_EFFICIENT_ALIGNED_ALLOC 1
so the second condition isn't satisfied. For uses inside of the OpenMP
allocators we can still use _aligned_malloc but we need to call _aligned_free
in gomp_aligned_free.
2022-05-28 Jakub Jelinek <jakub@redhat.com>
PR libgomp/105745
* libgomp.h (GOMP_HAVE_EFFICIENT_ALIGNED_ALLOC): Don't define for
defined(HAVE__ALIGNED_MALLOC) case.
* alloc.c (gomp_aligned_alloc): Move defined(HAVE__ALIGNED_MALLOC)
handling as last option before fallback instead of first.
(gomp_aligned_free): For defined(HAVE__ALIGNED_MALLOC) call
_aligned_free.
OpenMP 5.1 and earlier had 2 different uses of to clause, one for target
update construct with one semantics, and one for declare target directive
with a different semantics.
Under the hood we were using OMP_CLAUSE_TO_DECLARE to represent the latter.
OpenMP 5.2 renamed the declare target clause to to enter, the old one is
kept as a deprecated alias.
As we are far from having full OpenMP 5.2 support, this patch adds support
for the enter clause (and renames OMP_CLAUSE_TO_DECLARE to OMP_CLAUSE_ENTER
with a flag to tell the spelling of the clause for better diagnostics),
but doesn't deprecate the to clause on declare target just yet (that
should be done as one of the last steps in 5.2 support).
2022-05-27 Jakub Jelinek <jakub@redhat.com>
gcc/
* tree-core.h (enum omp_clause_code): Rename OMP_CLAUSE_TO_DECLARE
to OMP_CLAUSE_ENTER.
* tree.h (OMP_CLAUSE_ENTER_TO): Define.
* tree.cc (omp_clause_num_ops, omp_clause_code_name): Rename
OMP_CLAUSE_TO_DECLARE to OMP_CLAUSE_ENTER.
* tree-pretty-print.cc (dump_omp_clause): Handle OMP_CLAUSE_ENTER
instead of OMP_CLAUSE_TO_DECLARE, if OMP_CLAUSE_ENTER_TO, print
"to" instead of "enter".
* tree-nested.cc (convert_nonlocal_omp_clauses,
convert_local_omp_clauses): Handle OMP_CLAUSE_ENTER instead of
OMP_CLAUSE_TO_DECLARE.
gcc/c-family/
* c-pragma.h (enum pragma_omp_clause): Add PRAGMA_OMP_CLAUSE_ENTER.
gcc/c/
* c-parser.cc (c_parser_omp_clause_name): Parse enter clause.
(c_parser_omp_all_clauses): For to clause on declare target, use
OMP_CLAUSE_ENTER clause with OMP_CLAUSE_ENTER_TO instead of
OMP_CLAUSE_TO_DECLARE clause. Handle PRAGMA_OMP_CLAUSE_ENTER.
(OMP_DECLARE_TARGET_CLAUSE_MASK): Add enter clause.
(c_parser_omp_declare_target): Use OMP_CLAUSE_ENTER instead of
OMP_CLAUSE_TO_DECLARE.
* c-typeck.cc (c_finish_omp_clauses): Handle OMP_CLAUSE_ENTER instead
of OMP_CLAUSE_TO_DECLARE, to OMP_CLAUSE_ENTER_TO use "to" as clause
name in diagnostics instead of
omp_clause_code_name[OMP_CLAUSE_CODE (c)].
gcc/cp/
* parser.cc (cp_parser_omp_clause_name): Parse enter clause.
(cp_parser_omp_all_clauses): For to clause on declare target, use
OMP_CLAUSE_ENTER clause with OMP_CLAUSE_ENTER_TO instead of
OMP_CLAUSE_TO_DECLARE clause. Handle PRAGMA_OMP_CLAUSE_ENTER.
(OMP_DECLARE_TARGET_CLAUSE_MASK): Add enter clause.
(cp_parser_omp_declare_target): Use OMP_CLAUSE_ENTER instead of
OMP_CLAUSE_TO_DECLARE.
* semantics.cc (finish_omp_clauses): Handle OMP_CLAUSE_ENTER instead
of OMP_CLAUSE_TO_DECLARE, to OMP_CLAUSE_ENTER_TO use "to" as clause
name in diagnostics instead of
omp_clause_code_name[OMP_CLAUSE_CODE (c)].
gcc/testsuite/
* c-c++-common/gomp/clauses-3.c: Add tests with enter clause instead
of to or modify some existing to clauses to enter.
* c-c++-common/gomp/declare-target-1.c: Likewise.
* c-c++-common/gomp/declare-target-2.c: Likewise.
* c-c++-common/gomp/declare-target-3.c: Likewise.
* g++.dg/gomp/attrs-9.C: Likewise.
* g++.dg/gomp/declare-target-1.C: Likewise.
libgomp/
* testsuite/libgomp.c-c++-common/target-40.c: Modify some existing to
clauses to enter.
* testsuite/libgomp.c/target-41.c: Likewise.
Richi reported occassional hangs with taskwait-depend-nowait-1.*
tests and I've finally manged to reproduce. The problem is if
taskwait depend without nowait is encountered soon after
taskwait depend nowait and the former depends on the latter and there
is no other work to do, the taskwait depend without nowait is put
to sleep, but the empty_task optimization in
gomp_task_run_post_handle_dependers wouldn't wake it up in that
case. gomp_task_run_post_handle_dependers normally does some wakeups
because it schedules more work (another task), which is not the
case of empty_task, but we need to do the wakeups that would be done
upon task completion so that we awake sleeping threads when the
last child is done.
So, the taskwait-depend-nowait-1.* testcase is fixed with the
else if (__builtin_expect (task->parent_depends_on, 0) part of
the patch.
The new testcase can hang on another problem, if the empty task
is the last task of a taskgroup, we need to use atomic store
like elsewhere to decrease the counter to 0, and wake up taskgroup
end if needed.
Yet another spot which can sleep is normal taskwait (without depend),
but I believe nothing needs to be done for that - in that case we
await solely until the children's queue has no tasks, tasks still
waiting for dependencies aren't accounted in that, but the reason
is that if taskwait should wait for something, there needs to be at least
one active child doing something (in the children queue), which then
possibly awakes some of its siblings when the dependencies are met,
or in the empty task case awakes further dependencies, but in any
case the child that finished is still handled as active child and
will awake taskwait at the end if there is nothing further to
do.
Last sleeping case are barriers, but that is handled by ++ret and
awaking the barrier.
2022-05-25 Jakub Jelinek <jakub@redhat.com>
* task.c (gomp_task_run_post_handle_dependers): If empty_task
is the last task taskwait depend depends on, wake it up.
Similarly if it is the last child of a taskgroup, use atomic
store instead of decrement and awak taskgroup wait if any.
* testsuite/libgomp.c-c++-common/taskwait-depend-nowait-2.c: New test.
This adds architecture options and multilibs for the AMD GFX90a GPUs.
It also tidies up some of the ISA selection code, and corrects a few small
mistake in the gfx908 naming.
gcc/ChangeLog:
* config.gcc (amdgcn): Accept --with-arch=gfx908 and gfx90a.
* config/gcn/gcn-opts.h (enum gcn_isa): New.
(TARGET_GCN3): Use enum gcn_isa.
(TARGET_GCN3_PLUS): Likewise.
(TARGET_GCN5): Likewise.
(TARGET_GCN5_PLUS): Likewise.
(TARGET_CDNA1): New.
(TARGET_CDNA1_PLUS): New.
(TARGET_CDNA2): New.
(TARGET_CDNA2_PLUS): New.
(TARGET_M0_LDS_LIMIT): New.
(TARGET_PACKED_WORK_ITEMS): New.
* config/gcn/gcn.cc (gcn_isa): Change to enum gcn_isa.
(gcn_option_override): Recognise CDNA ISA variants.
(gcn_omp_device_kind_arch_isa): Support gfx90a.
(gcn_expand_prologue): Make m0 init optional.
Add support for packed work items.
(output_file_start): Support gfx90a.
(gcn_hsa_declare_function_name): Support gfx90a metadata.
* config/gcn/gcn.h (TARGET_CPU_CPP_BUILTINS):Add __CDNA1__ and
__CDNA2__.
* config/gcn/gcn.md (<su>mulsi3_highpart): Use TARGET_GCN5_PLUS.
(<su>mulsi3_highpart_imm): Likewise.
(<su>mulsidi3): Likewise.
(<su>mulsidi3_imm): Likewise.
* config/gcn/gcn.opt (gpu_type): Add gfx90a.
* config/gcn/mkoffload.cc (EF_AMDGPU_MACH_AMDGCN_GFX90a): New.
(main): Support gfx90a.
* config/gcn/t-gcn-hsa: Add gfx90a multilib.
* config/gcn/t-omp-device: Add gfx90a isa.
libgomp/ChangeLog:
* plugin/plugin-gcn.c (EF_AMDGPU_MACH): Add
EF_AMDGPU_MACH_AMDGCN_GFX90a.
(gcn_gfx90a_s): New.
(isa_hsa_name): Support gfx90a.
(isa_code): Likewise.
This patch adds support for (so far C/C++)
#pragma omp taskwait nowait depend(...)
directive, which is like
#pragma omp task depend(...)
;
but slightly optimized on the library side, so that it creates
the task only for the purpose of dependency tracking and doesn't actually
schedule it and wait for it when the dependencies are satisfied, instead
makes its dependencies satisfied right away.
2022-05-24 Jakub Jelinek <jakub@redhat.com>
PR c/105378
gcc/
* omp-builtins.def (BUILT_IN_GOMP_TASKWAIT_DEPEND_NOWAIT): New
builtin.
* gimplify.cc (gimplify_omp_task): Diagnose taskwait with nowait
clause but no depend clauses.
* omp-expand.cc (expand_taskwait_call): Use
BUILT_IN_GOMP_TASKWAIT_DEPEND_NOWAIT rather than
BUILT_IN_GOMP_TASKWAIT_DEPEND if nowait clause is present.
gcc/c/
* c-parser.cc (OMP_TASKWAIT_CLAUSE_MASK): Add nowait clause.
gcc/cp/
* parser.cc (OMP_TASKWAIT_CLAUSE_MASK): Add nowait clause.
gcc/testsuite/
* c-c++-common/gomp/taskwait-depend-nowait-1.c: New test.
libgomp/
* libgomp_g.h (GOMP_taskwait_depend_nowait): Declare.
* libgomp.map (GOMP_taskwait_depend_nowait): Export at GOMP_5.1.1.
* task.c (empty_task): New function.
(gomp_task_run_post_handle_depend_hash): Declare earlier.
(gomp_task_run_post_handle_depend): Declare.
(GOMP_task): Optimize fn == empty_task if there is nothing to wait
for.
(gomp_task_run_post_handle_dependers): Optimize task->fn == empty_task.
(GOMP_taskwait_depend_nowait): New function.
* testsuite/libgomp.c-c++-common/taskwait-depend-nowait-1.c: New test.
For allocatable/pointer arrays, a firstprivate to a device
not only needs to privatize the descriptor but also the actual
data. This is implemented as:
firstprivate(x) firstprivate(x.data) attach(x [bias: &x.data-&x)
where the address of x in device memory is saved in hostaddrs[i]
by libgomp and the middle end actually passes hostaddrs[i]' to
attach.
As side effect, has_device_addr(array_desc) had to be changed:
before, it was converted to firstprivate in the front end; now
it is handled in omp-low.cc as has_device_addr requires a shallow
firstprivate (not touching the data pointer) while the normal
firstprivate requires (now) a deep firstprivate.
gcc/fortran/ChangeLog:
PR fortran/104949
* f95-lang.cc (LANG_HOOKS_OMP_ARRAY_SIZE): Redefine.
* trans-openmp.cc (gfc_omp_array_size): New.
(gfc_trans_omp_variable_list): Never turn has_device_addr
to firstprivate.
* trans.h (gfc_omp_array_size): New.
gcc/ChangeLog:
PR fortran/104949
* langhooks-def.h (lhd_omp_array_size): New.
(LANG_HOOKS_OMP_ARRAY_SIZE): Define.
(LANG_HOOKS_DECLS): Add it.
* langhooks.cc (lhd_omp_array_size): New.
* langhooks.h (struct lang_hooks_for_decls): Add hook.
* omp-low.cc (scan_sharing_clauses, lower_omp_target):
Handle GOMP_MAP_FIRSTPRIVATE for array descriptors.
libgomp/ChangeLog:
PR fortran/104949
* target.c (gomp_map_vars_internal, copy_firstprivate_data):
Support attach for GOMP_MAP_FIRSTPRIVATE.
* testsuite/libgomp.fortran/target-firstprivate-1.f90: New test.
* testsuite/libgomp.fortran/target-firstprivate-2.f90: New test.
* testsuite/libgomp.fortran/target-firstprivate-3.f90: New test.
This patch adds two new OpenMP runtime routines: omp_target_memcpy_async and
omp_target_memcpy_rect_async. Both functions are introduced in OpenMP 5.1 as
asynchronous variants of omp_target_memcpy and omp_target_memcpy_rect.
In contrast to the synchronous variants, the asynchronous functions have two
additional function parameters to allow the specification of task dependences:
int depobj_count
omp_depend_t *depobj_list
integer(c_int), value :: depobj_count
integer(omp_depend_kind), optional :: depobj_list(*)
The implementation splits the synchronous functions into two parts: (a) check
and (b) copy. Then (a) is used in the asynchronous functions for the sequential
part, and the actual copy process (b) is executed in a new created task. The
sequential part (a) takes into account the requirements for the return values:
"The routine returns zero if successful. Otherwise, it returns a non-zero
value." (omp_target_memcpy_async, OpenMP 5.1 spec, section 3.8.7)
"An application can determine the number of inclusive dimensions supported by an
implementation by passing NULL pointers (or C_NULL_PTR, for Fortran) for both
dst and src. The routine returns the number of dimensions supported by the
implementation for the specified device numbers. No copy operation is
performed." (omp_target_memcpy_rect_async, OpenMP 5.1 spec, section 3.8.8)
Due to asynchronicity an error is thrown if the asynchronous memcpy is not
successful (in contrast to the synchronous functions which use a return
value unequal to zero).
gcc/ChangeLog:
* omp-low.cc (omp_runtime_api_call): Added target_memcpy_async and
target_memcpy_rect_async to omp_runtime_apis array.
libgomp/ChangeLog:
* libgomp.map: Added omp_target_memcpy_async and
omp_target_memcpy_rect_async.
* libgomp.texi: Both functions are now supported.
* omp.h.in: Added omp_target_memcpy_async and
omp_target_memcpy_rect_async.
* omp_lib.f90.in: Added interfaces for both new functions.
* omp_lib.h.in: Likewise.
* target.c (ialias_redirect): Added for GOMP_task.
(omp_target_memcpy): Restructured into check and copy part.
(omp_target_memcpy_check): New helper function for omp_target_memcpy and
omp_target_memcpy_async that checks requirements.
(omp_target_memcpy_copy): New helper function for omp_target_memcpy and
omp_target_memcpy_async that performs the memcpy.
(omp_target_memcpy_async_helper): New helper function that is used in
omp_target_memcpy_async for the asynchronous task.
(omp_target_memcpy_async): Added.
(omp_target_memcpy_rect): Restructured into check and copy part.
(omp_target_memcpy_rect_check): New helper function for
omp_target_memcpy_rect and omp_target_memcpy_rect_async that checks
requirements.
(omp_target_memcpy_rect_copy): New helper function for
omp_target_memcpy_rect and omp_target_memcpy_rect_async that performs
the memcpy.
(omp_target_memcpy_rect_async_helper): New helper function that is used
in omp_target_memcpy_rect_async for the asynchronous task.
(omp_target_memcpy_rect_async): Added.
* task.c (ialias): Added for GOMP_task.
* testsuite/libgomp.c-c++-common/target-memcpy-async-1.c: New test.
* testsuite/libgomp.c-c++-common/target-memcpy-async-2.c: New test.
* testsuite/libgomp.c-c++-common/target-memcpy-rect-async-1.c: New test.
* testsuite/libgomp.c-c++-common/target-memcpy-rect-async-2.c: New test.
* testsuite/libgomp.fortran/target-memcpy-async-1.f90: New test.
* testsuite/libgomp.fortran/target-memcpy-async-2.f90: New test.
* testsuite/libgomp.fortran/target-memcpy-rect-async-1.f90: New test.
* testsuite/libgomp.fortran/target-memcpy-rect-async-2.f90: New test.
OpenMP 5.2 added
"When called from within a target region the effect is unspecified."
restriction to omp_display_env, so it is ok not to support it in
target regions (worst case we could add an empty implementation
or one with __builtin_trap in there).
2022-05-17 Jakub Jelinek <jakub@redhat.com>
* libgomp.texi (OpenMP 5.1): Remove "Not inside target regions"
comment for omp_display_env feature.
This patch adds support for inoutset depend-kind in depend
clauses. It is very similar to the in depend-kind in that
a task with a dependency with that depend-kind is dependent
on all previously created sibling tasks with matching address
unless they have the same depend-kind.
In the in depend-kind case everything is dependent except
for in -> in dependency, for inoutset everything is
dependent except for inoutset -> inoutset dependency.
mutexinoutset is also similar (everything is dependent except
for mutexinoutset -> mutexinoutset dependency), but there is
also the additional restriction that only one task with
mutexinoutset for each address can be scheduled at once (i.e.
mutual exclusitivty). For now we support mutexinoutset
the same as inout/out, but the inoutset support is full.
In order not to bump the ABI for dependencies each time
(we've bumped it already once, the old ABI supports only
inout/out and in depend-kind, the new ABI supports
inout/out, mutexinoutset, in and depobj), this patch arranges
for inoutset to be at least for the time being always handled
as if it was specified through depobj even when it is not.
So it uses the new ABI for that and inoutset are represented
like depobj - pointer to a pair of pointers where the first one
will be the actual address of the object mentioned in depend
clause and second pointer will be (void *) GOMP_DEPEND_INOUTSET.
2022-05-17 Jakub Jelinek <jakub@redhat.com>
gcc/
* tree-core.h (enum omp_clause_depend_kind): Add
OMP_CLAUSE_DEPEND_INOUTSET.
* tree-pretty-print.cc (dump_omp_clause): Handle
OMP_CLAUSE_DEPEND_INOUTSET.
* gimplify.cc (gimplify_omp_depend): Likewise.
* omp-low.cc (lower_depend_clauses): Likewise.
gcc/c-family/
* c-omp.cc (c_finish_omp_depobj): Handle
OMP_CLAUSE_DEPEND_INOUTSET.
gcc/c/
* c-parser.cc (c_parser_omp_clause_depend): Parse
inoutset depend-kind.
(c_parser_omp_depobj): Likewise.
gcc/cp/
* parser.cc (cp_parser_omp_clause_depend): Parse
inoutset depend-kind.
(cp_parser_omp_depobj): Likewise.
* cxx-pretty-print.cc (cxx_pretty_printer::statement): Handle
OMP_CLAUSE_DEPEND_INOUTSET.
gcc/testsuite/
* c-c++-common/gomp/all-memory-1.c (boo): Add test with
inoutset depend-kind.
* c-c++-common/gomp/all-memory-2.c (boo): Likewise.
* c-c++-common/gomp/depobj-1.c (f1): Likewise.
(f2): Adjusted expected diagnostics.
* g++.dg/gomp/depobj-1.C (f4): Adjust expected diagnostics.
include/
* gomp-constants.h (GOMP_DEPEND_INOUTSET): Define.
libgomp/
* libgomp.h (struct gomp_task_depend_entry): Change is_in type
from bool to unsigned char.
* task.c (gomp_task_handle_depend): Handle GOMP_DEPEND_INOUTSET.
Ignore dependencies where
task->depend[i].is_in && task->depend[i].is_in == ent->is_in
rather than just task->depend[i].is_in && ent->is_in. Remember
whether GOMP_DEPEND_IN loop is needed and guard the loop with that
conditional.
(gomp_task_maybe_wait_for_dependencies): Handle GOMP_DEPEND_INOUTSET.
Ignore dependencies where elem.is_in && elem.is_in == ent->is_in
rather than just elem.is_in && ent->is_in.
* testsuite/libgomp.c-c++-common/depend-1.c (test): Add task with
inoutset depend-kind.
* testsuite/libgomp.c-c++-common/depend-2.c (test): Likewise.
* testsuite/libgomp.c-c++-common/depend-3.c (test): Likewise.
* testsuite/libgomp.c-c++-common/depend-inoutset-1.c: New test.
This patch adds support for list items in the has_device_addr clause which type
is given by C++ template parameters.
gcc/cp/ChangeLog:
* pt.cc (tsubst_omp_clauses): Added OMP_CLAUSE_HAS_DEVICE_ADDR.
* semantics.cc (finish_omp_clauses): Added template decl processing.
libgomp/ChangeLog:
* testsuite/libgomp.c++/target-has-device-addr-7.C: New test.
* testsuite/libgomp.c++/target-has-device-addr-8.C: New test.
* testsuite/libgomp.c++/target-has-device-addr-9.C: New test.
