With -mbranch-protection=pac-ret the debug info toggles the
signedness state of the return address so the unwinder knows when
the return address needs pointer authentication.
The unwind context flags were not updated according to the dwarf
frame info.
This causes unwinding across frames that were built without pac-ret
to incorrectly authenticate the return address wich corrupts the
return address on a system where PAuth is enabled.
Note: This even affects systems where all code use pac-ret because
unwinding across a signal frame the return address is not signed.
gcc/testsuite/ChangeLog:
PR target/94514
* g++.target/aarch64/pr94514.C: New test.
* gcc.target/aarch64/pr94514.c: New test.
libgcc/ChangeLog:
PR target/94514
* config/aarch64/aarch64-unwind.h (aarch64_frob_update_context):
Update context->flags accroding to the frame state.
According to "Intel 64 and IA32 Arch SDM, Vol. 3:
"Because SIMD floating-point exceptions are precise and occur immediately,
the situation does not arise where an x87 FPU instruction, a WAIT/FWAIT
instruction, or another SSE/SSE2/SSE3 instruction will catch a pending
unmasked SIMD floating-point exception."
Remove unneeded assignments to volatile memory.
libgcc/ChangeLog:
* config/i386/sfp-exceptions.c (__sfp_handle_exceptions) [__SSE_MATH__]:
Remove unneeded assignments to volatile memory.
libatomic/ChangeLog:
* config/x86/fenv.c (__atomic_feraiseexcept) [__SSE_MATH__]:
Remove unneeded assignments to volatile memory.
libgfortran/ChangeLog:
* config/fpu-387.h (local_feraiseexcept) [__SSE_MATH__]:
Remove unneeded assignments to volatile memory.
As reported in the PR, GCC 10 (and also 9.3.1 but not 9.3.0) fails to build
when using older binutils which lack LSE support, because those instructions
are used in libgcc.
Thanks to Kyrylo's hint, the following patches (hopefully) allow it to build
even with older binutils by using .inst directive if LSE support isn't
available in the assembler.
2020-04-15 Jakub Jelinek <jakub@redhat.com>
PR target/93053
* configure.ac (LIBGCC_CHECK_AS_LSE): Add HAVE_AS_LSE checking.
* config/aarch64/lse.S: Include auto-target.h, if HAVE_AS_LSE
is not defined, use just .arch armv8-a.
(B, M, N, OPN): Define.
(COMMENT): New .macro.
(CAS, CASP, SWP, LDOP): Use .inst directive if HAVE_AS_LSE is not
defined. Otherwise, move the operands right after the glue? and
comment out operands where the macros are used.
* configure: Regenerated.
* config.in: Regenerated.
Check for and handle new skip trace addresses when unwinding on zTPF.
libgcc/ChangeLog:
2020-04-03 Jim Johnston <jjohnst@us.ibm.com>
* config/s390/tpf-unwind.h (MIN_PATRANGE, MAX_PATRANGE)
(TPFRA_OFFSET): Macros removed.
(CP_CNF, cinfc_fast, CINFC_CMRESET, CINTFC_CMCENBKST)
(CINTFC_CMCENBKED, ICST_CRET, ICST_SRET, LOWCORE_PAGE3_ADDR)
(PG3_SKIPPING_OFFSET): New macros.
(__isPATrange): Use cinfc_fast for the check.
(__isSkipResetAddr): New function.
(s390_fallback_frame_state): Check for skip trace addresses. Use
either ICST_CRET or ICST_SRET to calculate return address
location.
(__tpf_eh_return): Handle skip trace addresses.
The recent patch to convert all thumb1 code in libgcc to unified syntax
ommitted the conditional code that is used only when building the library
for minimal size. This patch fixes this case.
I've also fixed the COND macro so that a single definition is always used
that is for unified syntax. This eliminates a warning that is now being
seen from the assembler when compiling the ieee fp support code.
PR target/94220
* config/arm/lib1funcs.asm (COND): Use a single definition for
unified syntax.
(aeabi_uidivmod): Unified syntax when optimizing Thumb for size.
(aeabi_idivmod): Likewise.
(divsi3_skip_div0_test): Likewise.
This patch adds a new multilib for armv8.1-m.main+mve with hard float abi. For
armv8.1-m.main+mve soft and softfp, the v8-M multilibs will be reused.
The following mappings are also updated:
"-mfloat-abi=hard -march=armv8.1-m.main+mve.fp -> armv8-m.main+fp/hard"
"-mfloat-abi=softfp -march=armv8.1-m.main+mve.fp -> armv8-m.main+fp/softfp"
"-mfloat-abi=soft -march=armv8.1-m.main+mve.fp -> armv8-m.main/nofp"
gcc/ChangeLog:
2020-03-17 Mihail Ionescu <mihail.ionescu@arm.com>
* config/arm/t-rmprofile: create new multilib for
armv8.1-m.main+mve hard float and reuse v8-m.main ones for
v8.1-m.main+mve .
gcc/testsuite/ChangeLog:
2020-03-17 Mihail Ionescu <mihail.ionescu@arm.com>
* gcc.target/arm/multilib.exp: Add new v8.1-M entry.
libgcc/ChangLog:
2020-03-17 Mihail Ionescu <mihail.ionescu@arm.com>
* config/arm/t-arm: Do not compile cmse_nonsecure_call.S for v8.1-m.
libgcc is supposed to be built with the trace skip flags and branch
targets. Add a zTPF header file fragment and add the -mtpf-trace-skip
option.
libgcc/ChangeLog:
2020-03-04 Andreas Krebbel <krebbel@linux.ibm.com>
* config.host: Include the new makefile fragment.
* config/s390/t-tpf: New file.
Unified syntax has been the official syntax for thumb1 assembly for
over 10 years now. It's time we made preparations for that becoming
the default in the assembler. But before we can start doing that we
really need to clean up some laggards from the olden days. Libgcc
support for thumb1 is one such example.
This patch converts all of the legacy (disjoint) syntax that I could
find over to unified code. The identification was done by using a
trick version of gas that defaulted to unified mode which then faults
if legacy syntax is encountered. The code produced was then compared
against the old code to check for differences. One such difference
does exist, but that is because in unified syntax 'movs rd, rn' is
encoded as 'lsls rd, rn, #0', rather than 'adds rd, rn, #0'; but that
is a deliberate change that was introduced because the lsls encoding
more closely reflects the behaviour of 'movs' in arm state (where only
some of the condition flags are modified).
* config/arm/bpabi-v6m.S (aeabi_lcmp): Convert thumb1 code to unified
syntax.
(aeabi_ulcmp, aeabi_ldivmod, aeabi_uldivmod): Likewise.
(aeabi_frsub, aeabi_cfcmpeq, aeabi_fcmpeq): Likewise.
(aeabi_fcmp, aeabi_drsub, aeabi_cdrcmple): Likewise.
(aeabi_cdcmpeq, aeabi_dcmpeq, aeabi_dcmp): Likewise.
* config/arm/lib1funcs.S (Lend_fde): Convert thumb1 code to unified
syntax.
(divsi3, modsi3): Likewise.
(clzdi2, ctzsi2): Likewise.
* config/arm/libunwind.S (restore_core_regs): Convert thumb1 code to
unified syntax.
(UNWIND_WRAPPER): Likewise.
PR ipa/92924
* common.opt: Add -fprofile-reproducibility.
* doc/invoke.texi: Document it.
* value-prof.c (dump_histogram_value):
Document and support behavior for counters[0]
being a negative value.
(get_nth_most_common_value): Handle negative
counters[0] in respect to flag_profile_reproducible.
PR ipa/92924
* libgcov-merge.c (merge_topn_values_set): Record
when a TOP N counter becomes invalid. When merging
remove a smallest value if the space is needed.
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
Linux CET kernel places a restore token on shadow stack for signal
handler to enhance security. The restore token is 8 byte and aligned
to 8 bytes. It is usually transparent to user programs since kernel
will pop the restore token when signal handler returns. But when an
exception is thrown from a signal handler, now we need to pop the
restore token from shadow stack. For x86-64, we just need to treat
the signal frame as normal frame. For i386, we need to search for
the restore token to check if the original shadow stack is 8 byte
aligned. If the original shadow stack is 8 byte aligned, we just
need to pop 2 slots, one restore token, from shadow stack. Otherwise,
we need to pop 3 slots, one restore token + 4 byte padding, from
shadow stack.
This patch also includes 2 tests, one has a restore token with 4 byte
padding and one without.
Tested on Linux/x86-64 CET machine with and without -m32.
libgcc/
PR libgcc/85334
* config/i386/shadow-stack-unwind.h (_Unwind_Frames_Increment):
New.
gcc/testsuite/
PR libgcc/85334
* g++.target/i386/pr85334-1.C: New test.
* g++.target/i386/pr85334-2.C: Likewise.
Commit r10-6500-g811a475ea3fcc55ee4aea7c81171891ef19dfc25 broke the
GCC build for arm-none-uclinuxfdpiceabi, as it forgot to update some
uses of gnu_Unwind_Find_got.
2020-02-10 Christophe Lyon <christophe.lyon@linaro.org>
libgcc/
PR target/93615
* unwind-arm-common.inc: Replace uses of gnu_Unwind_Find_got with
_Unwind_gnu_Find_got.
* unwind-pe.h: Likewise.
As the following testcase shows, unwind.h on ARM can't be (starting with GCC
10) compiled with -std=c* modes, only -std=gnu* modes.
The problem is it uses asm keyword, which isn't a keyword in those modes
(system headers vs. non-system ones don't make a difference here).
glibc and other installed headers use __asm or __asm__ keywords instead that
work fine in both standard and gnu modes.
While there, as it is an installed header, I think it is also wrong to
completely ignore any identifier namespace rules.
The generic unwind.h defines just _Unwind* namespace identifiers plus
_sleb128_t/_uleb128_t (but e.g. unlike libstdc++/glibc headers doesn't
uglify operand names), the ARM unwind.h is much worse here. I've just
changed the gnu_Unwind_Find_got function at least not be in user identifier
namespace, but perhaps it would be good to go further and rename e.g.
or e.g.
typedef _Unwind_Reason_Code (*personality_routine) (_Unwind_State,
_Unwind_Control_Block *, _Unwind_Context *);
in unwind-arm-common.h.
2020-02-07 Jakub Jelinek <jakub@redhat.com>
PR target/93615
* config/arm/unwind-arm.h (gnu_Unwind_Find_got): Rename to ...
(_Unwind_gnu_Find_got): ... this. Use __asm instead of asm. Remove
trailing :s in asm. Formatting fixes.
(_Unwind_decode_typeinfo_ptr): Adjust caller.
* gcc.dg/pr93615.c: New test.
On nios2-linux-gnu, there has been a long-standing bug in C++ exception
handling that sometimes resulted in link errors like
../nios2-linux-gnu/bin/ld: FDE encoding in /tmp/cccfpQ2l.o(.eh_frame) prevents .eh_frame_hdr table being created
when building some shared libraries or PIE executables. The root of
the problem is that GCC was incorrectly emitting an absolute encoding
in EH tables for PIC. This patch changes it to use either
DW_EH_PE_indirect (for global) or DW_EH_PE_datarel (for local), and
fixes libgcc so it can find the address of the GOT as the base address
for DW_EH_PE_datarel.
Complicating matters somewhat, GAS was missing support for
%gotoff(symbol) relocation syntax. I have just pushed a fix for that,
but I've added a configure check to test for presence of the binutils
support and fall back to the current absolute encoding (which works
most of the time) if it is not available. Once the fix makes it into
an official binutils release it might be appropriate to make this
error out instead.
Since this is a wrong-code bug and affects only nios2 target, I think
this is appropriate for Stage 4. I regression-tested on both
nios2-linux-gnu and nios2-elf, with and without the binutils support
present, before committing this.
2020-01-31 Sandra Loosemore <sandra@codesourcery.com>
gcc/
* configure.ac [nios2-*-*]: Check HAVE_AS_NIOS2_GOTOFF_RELOCATION.
* config.in: Regenerated.
* configure: Regenerated.
* config/nios2/nios2.h (ASM_PREFERRED_EH_DATA_FORMAT): Fix handling
for PIC when HAVE_AS_NIOS2_GOTOFF_RELOCATION.
(ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX): New.
gcc/testsuite/
* g++.target/nios2/hello-pie.C: New.
* g++.target/nios2/nios2.exp: New.
libgcc/
* config.host [nios2-*-linux*] (tmake_file, tm_file): Adjust.
* config/nios2-elf-lib.h: New.
* unwind-dw2-fde-dip.c (_Unwind_IteratePhdrCallback): Use existing
code for finding GOT base for nios2.
ARC processors can work with a reduced register set (i.e. registers
r4-r9 and r16-r25 are not available). This option can be enabled
passing -mrf16 option to the compiler, or by using -mcpu=em_mini CPU
configuration. Using RF16 config requires all the hand-made assembly
files used in libgcc to have the corresponding RF16 object attribute
set.
This patch qualifies the relevant hand-made assembly files to
RF16 config, and also adds generic c-functions for the one which are
not.
libgcc/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/crti.S: Add RF16 object attribute.
* config/arc/crtn.S: Likewise.
* config/arc/crttls.S: Likewise.
* config/arc/lib1funcs.S: Likewise.
* config/arc/fp-hack.h (ARC_OPTFPE): Define.
* config/arc/lib2funcs.c: New file.
* config/arc/t-arc: Add lib2funcs to LIB2ADD.
libgcc/ChangeLog:
2020-01-23 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* config/mips/gnustack.h: Check for TARGET_LIBC_GNUSTACK also.
gcc/ChangeLog:
2020-01-23 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* config.in: Regenerated.
* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to 1
for TARGET_LIBC_GNUSTACK.
* configure: Regenerated.
* configure.ac: Define TARGET_LIBC_GNUSTACK if glibc version is
found to be 2.31 or greater.
PR tree-optimization/92924
* libgcov-profiler.c (__gcov_topn_values_profiler_body): First
try to find an existing value, then find an empty slot
if not found.
PR tree-optimization/92924
* profile.c (compute_value_histograms): Divide
all counter values.
PR tree-optimization/92924
* libgcov-driver.c (prune_topn_counter): New.
(prune_counters): Likewise.
(dump_one_gcov): Prune a run-time counter.
* libgcov-profiler.c (__gcov_topn_values_profiler_body):
For a known value, add GCOV_TOPN_VALUES to value.
Otherwise, decrement all counters by one.
* config/cris/arit.c (DS): Apply attribute fallthrough.
Without this, there are, for each compilation of arit.c, 30ish
occurrences of "this statement may fall through
[-Wimplicit-fallthrough=]", for lines that look like
case 32: DS; case 31: DS; case 30: DS; case 29: DS;
This patch is part of a patch series to add support for Armv8.1-M
Mainline Security Extensions architecture.
Code to detect whether cmse.c can be buit with -mcmse checks the output
of host GCC when invoked with -mcmse. However, an error from the
compiler does not prevent some minimal output so this always holds true.
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/t-arm: Check return value of gcc rather than lack of
output.
This changes introduces an internal API for VxWorks version checks
within runtime files, a prerequisite to a few fixes coming up for libstdc++
builds on more recent versions of the OS.
2019-12-30 Olivier Hainque <hainque@adacore.com>
gcc/
* config/vxworks/_vxworks-versions.h: New file.
* config.gcc (*-*-vxworks*): Add it to extra_headers.
libgcc/
* config/gthr-vxworks.h: Use _vxworks-versions.h.
* config/gthr-vxworks-tls.c: Likewise.
From-SVN: r279783
contrib/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-list.mk: Add msp430-elfbare.
gcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.gcc: s/msp430*-*-*/msp430-*-*.
Handle msp430-*-elfbare.
* config/msp430/msp430-devices.c (TARGET_SUBDIR): Define.
(_MSPMKSTR): Define.
(__MSPMKSTR): Define.
(rest_of_devices_path): Use TARGET_SUBDIR value in string.
* config/msp430/msp430.c (msp430_option_override): Error if
-fuse-cxa-atexit is used when it has been disabled at configure time.
* config/msp430/t-msp430: Define TARGET_SUBDIR when building
msp430-devices.o.
* doc/install.texi: Document msp430-*-elf and msp430-*-elfbare.
* doc/invoke.texi: Update documentation about which path devices.csv is
searched for.
gcc/testsuite/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* g++.dg/init/dso_handle1.C: Require cxa_atexit support.
* g++.dg/init/dso_handle2.C: Likewise.
* g++.dg/other/cxa-atexit1.C: Likewise.
* gcc.target/msp430/msp430.exp: Update csv-using-installed.c test to
handle msp430-elfbare configuration.
libgcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: s/msp430*-*-elf/msp430-*-elf*.
Override default "extra_parts" variable.
* configure: Regenerate.
* configure.ac: Disable TM clone registry by default for
msp430-elfbare.
From-SVN: r279442
ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-ml.in (msp430-*-*): Support --disable-no-exceptions configure
flag.
gcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (STARTFILE_SPEC) [!fexceptions]: Use
crtbegin_no_eh.o if building for the C language.
[fno-exceptions]: Use crtbegin_no_eh.o if building for any language
except C.
(ENDFILE_SPEC) [!fexceptions]: Use crtend_no_eh.o if building for
the C language.
[fno-exceptions]: Use crtend_no_eh.o if building for any language
except C.
* config/msp430/t-msp430: Add -fno-exceptions multilib.
* doc/install.texi: Document --disable-no-exceptions multilib configure
option.
* doc/sourcebuild.texi: Document exceptions_enabled effective target.
gcc/testsuite/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* lib/gcc-dg.exp: Add dg-prune messages for when exception handling is
disabled.
* lib/target-supports.exp (check_effective_target_exceptions_enabled):
New.
libgcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: Add crt{begin,end}_no_eh.o to "extra_parts".
* config.host (msp430*-*-elf): Add crt{begin,end}_no_eh.o to
"extra_parts".
From-SVN: r279246
2019-12-09 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c (__do_global_dtors_aux): Check if USE_EH_FRAME_REGISTRY is
defined instead of its value.
From-SVN: r279125
2019-12-09 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c (__do_global_dtors_aux): Wrap in #if so it's only defined
if it will have contents.
From-SVN: r279123
Szabolcs Nagy
Uros Bizjak
Jakub Jelinek
Ian Lance Taylor
Jim Johnston
Richard Earnshaw
Mihail Ionescu
Andreas Krebbel
Martin Liska
Sandra Loosemore
Jeff Law
H.J. Lu
Christophe Lyon
Claudiu Zissulescu
Maciej W. Rozycki
Jan Hubicka
Dragan Mladjenovic
Hans-Peter Nilsson
John David Anglin
Georg-Johann Lay
Kwok Cheung Yeung
Olivier Hainque
Jakub Jelinek
Jozef Lawrynowicz
Jozef Lawrynowicz