ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Expand the gtm_jmpbuf structure by one word field to add
Intel CET support further. The code in sjlj.S already
allocates more space on the stack then gtm_jmpbuf needs.
Use this extra space to absorb the new field.
The structure is allocated on the stack in such a way
that eip/rsp field is overlapped with return address on
the stack. Locate the new field right before eip/rsp so
code that accesses buffer fields relative to address of
gtm_jmpbuf has its offsets unchanged.
* libitm/config/x86/target.h: Add new field (ssp).
* libitm/config/x86/sjlj.S: Change offsets.
From-SVN: r254907
PR other/79046
libatomic/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libffi/
* configure.ac: Add GCC_BASE_VER.
* include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* configure: Regenerated.
* testsuite/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* man/Makefile.in: Regenerated.
libgomp/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libitm/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libmpx/
* mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* mpxwrap/Makefile.am (gcc_version): Likewise.
* mpxrt/Makefile.in: Regenerated.
* mpxwrap/Makefile.in: Regenerated.
liboffloadmic/
* plugin/configure.ac: Add GCC_BASE_VER.
* plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* plugin/configure: Regenerated.
* plugin/aclocal.m4: Regenerated.
* plugin/Makefile.in: Regenerated.
libsanitizer/
* interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@
instead of cat to get version from BASE-VER file.
* asan/Makefile.am (gcc_version): Likewise.
* ubsan/Makefile.am (gcc_version): Likewise.
* sanitizer_common/Makefile.am (gcc_version): Likewise.
* lsan/Makefile.am (gcc_version): Likewise.
* tsan/Makefile.am (gcc_version): Likewise.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libvtv/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
From-SVN: r244742
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
Since GTM::gtm_thread has
gtm_thread *next_thread __attribute__((__aligned__(HW_CACHELINE_SIZE)));
GTM::gtm_thread::operator new () calls xmalloc with separate_cl == true.
xmalloc must return memory on cache line in this case.
PR libitm/70456
* util.cc (xmalloc): Use posix_memalign to allocate memory on
on cache line if requested.
From-SVN: r235211
The attached patch adds the a target specific attribute via the
new target macro TARGET_BEGIN_TRANSACTION_ATTRIBUTE to the
function begin_transaction(). S/390 uses this to set the
soft-float target attribute which is needed to fix a crash with
-m31.
As there seems to be no place in libitm to document internal macros like
USE_HTM_FASTPATH or the new macro, I've put the documentation in a
comment where the macro is used.
2016-03-03 Dominik Vogt <vogt@linux.vnet.ibm.com>
* config/s390/target.h (TARGET_BEGIN_TRANSACTION_ATTRIBUTE): Define
function attribute to disable floating point in begin_transaction() on
S/390.
* beginend.cc (begin_transaction): Use
TARGET_BEGIN_TRANSACTION_ATTRIBUTE.
From-SVN: r233929
This patch adds an easy way to write tests for expected multiline
output. For example we can test carets and underlines for
a particular diagnostic with:
/* { dg-begin-multiline-output "" }
typedef struct _GMutex GMutex;
^~~~~~~
{ dg-end-multiline-output "" } */
multiline.exp is used by prune.exp; hence we need to load it before
prune.exp via *load_gcc_lib* for the testsuites of the various
non-"gcc" support libraries (e.g. boehm-gc).
gcc/testsuite/ChangeLog:
* lib/multiline.exp: New file.
* lib/prune.exp: Load multiline.exp.
(prune_gcc_output): Call into multiline.exp to handle any
multiline output directives.
* lib/libgo.exp: Load multiline.exp before prune.exp, using
load_gcc_lib.
boehm-gc/ChangeLog:
* testsuite/lib/boehm-gc.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libatomic/ChangeLog:
* testsuite/lib/libatomic.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libgomp/ChangeLog:
* testsuite/lib/libgomp.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libitm/ChangeLog:
* testsuite/lib/libitm.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libvtv/ChangeLog:
* testsuite/lib/libvtv.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
From-SVN: r228655
On behalf of Szabolcs.Nagy@arm.com
2015-04-22 Gregor Richards <gregor.richards@uwaterloo.ca>
* config/arm/hwcap.cc: Use fcntl.h instead of sys/fcntl.h.
* config/linux/x86/tls.h: Only use __GLIBC_PREREQ if defined.
From-SVN: r222325
libitm.c/stackundo.c fails with -fpic since test1 and test2 may be
preempted with -fpic. This patch makes those 2 functions static.
PR libitm/64360
* libitm.c/stackundo.c (test2): Make it static.
(test1): Likewise.
From-SVN: r219673
