2009-04-05 Daniel Kraft <d@domob.eu>
PR fortran/38654
* io/read.c (read_f): Reworked to speed up floating point parsing.
(convert_real): Use pointer-casting instead of memcpy and temporaries.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/io.h (format_hash_entry): New structure for hash table.
(format_hash_table): The hash table itself.
(free_format_data): Revise function prototype.
(free_format_hash_table, init_format_hash,
free_format_hash): New function prototypes.
* io/unit.c (close_unit_1): Use free_format_hash_table.
* io/transfer.c (st_read_done, st_write_done): Free format data if
internal unit.
* io/format.c (free_format_hash_table): New function that frees any
memory allocated previously for cached format data.
(reset_node): New static helper function to reset the format counters
for a format node.
(reset_fnode_counters): New static function recursively calls reset_node
to traverse the fnode tree.
(format_hash): New simple hash function based on XOR, probabalistic,
tosses collisions.
(save_parsed_format): New static function to save the parsed format
data to use again.
(find_parsed_format): New static function searches the hash table
looking for a match.
(free_format_data): Revised to accept pointer to format data rather than
the dtp pointer so that the function can be used in more places.
(format_lex): Editorial.
(parse_format_list): Set flag used to determine of format data hashing
is to be used. Internal units are not persistent enough for this.
(revert): Move to ne location in file.
(parse_format): Use new functions to look for previously parsed
format strings and use them rather than re-parse. If not found, saves
the parsed format data for later use.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/transfer.c (formatted_transfer_scalar): Remove this function by
factoring it into two new functions, one for read and one for write,
eliminating all the conditionals for read or write mode.
(formatted transfer_scalar_read): New function.
(formatted transfer_scalar_write): New function.
(formatted_transfer): Use new functions.
2009-04-05 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
From-SVN: r145571
2009-03-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/39528
* io/list_read.c (list_formatted_read_scalar): Move check for read
completion to just after the check for a repeated value.
From-SVN: r145030
2009-03-22 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
[[Split portion of a mixed commit.]]
From-SVN: r144993.2
2009-03-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/39409
* io/write_float.def (output_float): Handle F0.d formatting correctly
for any d when value is 0.0.
From-SVN: r144718
2009-01-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38772
* io/read.c (read_f): Clean up loop conditions for BZ/BN,
allowing proper digit testing. White space fix.
From-SVN: r143327
2009-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38735
* io/unit.c (get_internal_unit): Set default BLANK= status to NULL for
internal units.
From-SVN: r143102
2008-12-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37472
* io/write_float.def (output_float_FMT_G_): Modify calculation of temp
to avoid sensitivity to round-off.
From-SVN: r142884
2008-12-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38398
* io/io.h (st_parameter_dt): Add new bit to keep track of when to
suppress blanks for g0 formatting.
* io/transfer.c (formatted_transfer_scalar): Always call write_real_g0
for g0 formatting.
* io.c (write.c): Do not use ES formatting and use new bit to suppress
blanks.
* io/write_float.def (output_float): Adjust the location of setting the
width so that it can be adjusted when suppressing blanks. Set number of
blanks to zero when dtp->u.p.g0_no_blanks is set. Do some minor code
clean-up and add some white space for readability.
From-SVN: r142871
2008-12-13 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38504
io/write.c (write_decimal): Skip extra sign '-' at beginning of string
returned by gfc_itoa.
From-SVN: r142747
2008-12-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38430
* io/transfer.c (data_transfer_init): Move constraint check for REC=
and STREAM access into condition for other REC= constraints to simplify.
Comment out this constraint to avoid breaking compatibility with 4.3
until later. Added a TODO for above comment and this one.
Fix test for max pos.
From-SVN: r142575
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/38291
* io.c (match_dt_element): Use dt->pos in matcher.
(gfc_free_dt): Free dt->pos after use.
(gfc_resolve_dt): Use dt->pos in resolution of stream position tag.
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38291
* io/transfer.c (data_transfer_init): Add checks for POS= valid range.
Add check for unit opened with ACCESS="stream". Flush and seek if
current stream position does not match. Check ENDFILE on read.
From-SVN: r142515
2008-12-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/38285
* write_float.def (WRITE_FLOAT): Zero the float value for special case
only if scale_factor = 0.
From-SVN: r142455
PR libfortran/37839
* trans-io.c (gfc_build_io_library_fndecls): Decrease pad size back
to 16 pointers plus 32 integers. Don't use max integer kind
alignment, only gfc_intio_kind's alignment.
(gfc_trans_inquire): Only set flags2 if mask2 is non-zero.
* ioparm.def: Fix order, bitmasks and types of inquire round, sign
and pending fields. Move u in dt before id.
* io.c (gfc_free_inquire): Free decimal and size exprs.
(match_inquire_element): Match size instead of matching blank twice.
(gfc_resolve_inquire): Resolve size.
* gfortran.dg/f2003_inquire_1.f03: New test.
* gfortran.dg/f2003_io_1.f03: Remove xfail.
* gfortran.dg/f2003_io_4.f03: Likewise.
* gfortran.dg/f2003_io_5.f03: Likewise.
* gfortran.dg/f2003_io_6.f03: Likewise.
* gfortran.dg/f2003_io_7.f03: Likewise.
* io/io.h (IOPARM_INQUIRE_HAS_ROUND, IOPARM_INQUIRE_HAS_SIGN,
IOPARM_INQUIRE_HAS_PENDING): Adjust values.
(st_parameter_inquire): Reorder and fix types of round, sign and
pending fields.
(st_parameter_43, st_parameter_44): Removed.
(st_parameter_dt): Put back struct definition directly to u.p
declaration. Change type of u.p.size_used from gfc_offset to
GFC_IO_INT. Decrease back size of u.pad to 16 pointers and
32 ints. Put id, pos, asynchronous, blank, decimal, delim,
pad, round and sign fields after the union.
* io/inquire.c (inquire_via_unit, inquire_via_filename): Only read
flags2 if it is defined.
* io/transfer.c (read_sf, read_block_form, write_block): Cast
additions to size_used to GFC_IO_INT instead of gfc_offset.
(data_transfer_init): Clear whole u.p struct. Adjust
for moving id, pos, asynchronous, blank, decimal, delim, pad,
round and sign fields from u.p directly into st_parameter_dt.
(finalize_transfer): Don't cast size_used to GFC_IO_INT.
* io/file_pos.c (st_endfile): Clear whole u.p struct.
From-SVN: r142111
2008-11-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37472
* io/write_float.def (output_float_FMT_G_): Adjust conversion of
G format specification to F format.
From-SVN: r142079
2008-11-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37294
* io/write.c (namelist_write_newline): Use array loop specification to
advance to next internal array unit record. (namelist_write): Adjust to
accomodate the internal array unit behavior.
From-SVN: r141892
2008-10-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37707
* io/list_read.c (read_character): Remove code to look ahead in namelist
reads to descriminate non-delimited strings from namelist objects.
* io/write.c (namelist_write): Delimit character strings with quote or
apostrophe, defaulting to quote.
From-SVN: r141317
2008-10-19 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37834
* io/write_float.def (output_float): Emit '0.' for special case of
format specifier 'f0.0' and value of zero. Likewise emit '0' for 'f1.0'.
From-SVN: r141231
2008-10-16 Thomas Koenig <tkoenig@gcc.gnu.org>
* io/file_pos.c (unformatted_backspace): Normal case is
GFC_CONVERT_NATIVE.
* io/transfer.c (read_sf): Mark paths leading to generate_error()
as unlikely.
(readl_block_form): Likewise.
(read_block_direct): Likewise.
(write_block): Likewise.
(write_buf): Likewise.
(us_read): Likewise. Normal case is GFC_CONVERT_NATIVE.
(next_record_w_unf): Mark paths leading to generate_error()
as unlikely.
From-SVN: r141179
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* io/transfer.c (unformatted_read): CONVERT_NATIVE
is the usual case. Check for kind==1 for non-byte-reversing
operation.
(unformatted_write): Likewise.
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* gfortran.dg/convert_2.f90: New test case.
From-SVN: r141008
2008-10-08 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37707
* io/list_read.c (nml_get_obj_data): If the first namelist object rank
is greater than zero, call nml_object_read with the first object rather
than the sub-object.
From-SVN: r140995
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR fortran/37498
* trans-io.c (gfc_build_io_library_fndecls): Bump pad size.
(build_dt): Set mask bit for IOPARM_dt_f2003.
* ioparm.def: Add IOPARM_dt_f2003.
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37498
* file_pos (st_endfile): Clear memory only for libfortran 4.3 private
area.
* list_read.c (eat_separator): Only access F2003 I/O parameters if
IOPARM_DT_HAS_F2003 bit is set. (parse_real): Ditto.
(read_real): Ditto.
* read.c (read_a): Likewise. (read_a_char4): Likewise though not
strictly necessary. (read_f): Likewise.
* io.h (unit_sign_s): New enumerator to allow duplication of
st_parameter structures. (IOPARM_DT_HAS_F2003): New mask bit.
(st_parameter_43): New structure copied from 4.3 version of
st_paramater_dt private section. (st_parameter_44): New structure with
F2003 items added. (st_parameter_dt): Modified to create union of new
and old structures to allow correct memory setting for 4.3 ABI
compatibility. Bumped the pad size.
* transfer.c (read_sf): Do not use F2003 I/O memory areas unless
IOPARM_DT_HAS_F2003 bit has been set. (read_block_form): Ditto.
(formatted_transfer_scalar): Ditto. (data_transfer_init): Ditto and
add comment, fix formatting.
* write.c (write_default_char4): Likewise though not strictly necessary.
(write_utf8_char4): Ditto. (write_character): Ditto.
(write_real_g0): Ditto. (list_formatted_write_scalar): Ditto.
(nml_write_obj): Ditto. (namelist_write): Ditto.
* write_float.def (calculate_sign): Eliminate warning by including all
cases in switch. (output_float): Output only decimal point of F2003 flag
is not set.
From-SVN: r140576
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* io.c (check_format): Allow specifying precision with g0 format.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37301
PR libfortran/37228
* io/io.h (write_real_g0): Declare new function to handle g0.d format.
* io/transfer.c (formatted_transfer_scalar): Use new function.
* io/format.c (parse_format_list): Enable g0.d.
* io/write.c (write_a_char4): Delete unused var.
(set_fnode_default): New function to set the default fnode w, d, and e
factored from write_real. (write_real): Use new factored function.
(write_real_g0): New function that sets d to that passed by g0.d format
specifier and set format to ES. Default values for w and e are used
from the new function, set_fnode_default.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* gfortran.dg/fmt_g0_4.f08: Revised test.
From-SVN: r139886
2008-08-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36895
* io/write.c (namelist_write_newline): New function to correctly mark
next records in both external and internal units.
(nml_write_obj): Use new function.
(namelist_write: Use new function.
From-SVN: r139813
2008-08-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35863
* intrinsics/selected_char_kind.c: Enable iso_10646.
* io/read.c (typedef uchar): New type.
(read_utf8): New function to read a single UTF-8 encoded character.
(read_utf8_char1): New function to read UTF-8 into a KIND=1 string.
(read_default_char1): New functio to read default into KIND=1 string.
(read_utf8_char4): New function to read UTF-8 into a KIND=4 string.
(read_default_char4): New function to read UTF-8 into a KIND=4 string.
(read_a): Modify to use the new functions.
(read_a_char4): Modify to use the new functions.
* io/write.c (error.h): Add include. (typedef uchar): New type.
(write_default_char4): New function to default write KIND=4 string.
(write_utf8_char4): New function to UTF-8 write KIND=4 string.
(write_a_char4): Modify to use new functions.
(write_character): Modify to use new functions.
From-SVN: r139147
2008-07-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36852
* io/list_read.c: If variable rank is zero, do not adjust the found
namelist object pointer.
From-SVN: r138072
2008-07-22 Daniel Kraft <d@domob.eu>
PR fortran/29835
* io.c (error_element), (format_locus): New static globals.
(unexpected_element): Spelled out this message fully.
(next_char): Keep track of locus when not MODE_STRING.
(next_char_not_space): Remember last parsed element in error_element.
(format_lex): Fix two indentation errors.
(check_format): Use format_locus and possibly error_element for a
slightly better error message on invalid format.
(check_format_string): Set format_locus to start of the string
expression used as format.
2008-07-22 Daniel Kraft <d@domob.eu>
PR fortran/29835
* io/format.c (struct format_data): New member error_element.
(unexpected_element): Added '%c' to message.
(next_char): Keep track of last parsed character in fmt->error_element.
(format_error): If the message is unexpected_element, output the
offending character, too.
2008-07-22 Daniel Kraft <d@domob.eu>
PR fortran/29835
* gfortran.dg/fmt_error_3.f90: New test.
* gfortran.dg/fmt_error_4.f90: New test.
* gfortran.dg/fmt_error_5.f90: New test.
From-SVN: r138063
2008-07-22 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/36890
* io/file_pos.c: Declare READ_CHUNK as signed to avoid
signed/unsigned comparison warning in formatted_backspace.
From-SVN: r138050
2008-07-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36857
* io/write_float.def: Comment out locale dependent code and fix general
comments.
From-SVN: r138021
2008-06-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36657
* io/list_read.c (read_character): Check for '!' along with separators.
(find_nml_name): Likewise and eat the comment if found.
From-SVN: r137236
2008-06-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36546
* io/list_read.c (eat_separator): Add tab character to condition
for looping past whitespace.
From-SVN: r136859
2008-06-13 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/35863
* libgfortran.h: Change l8_to_l4_offset to big_endian and add endian_off.
* runtime/main.c: Fix error in comment. Change l8_to_l4_offset to
big_endian. (determine_endianness): Add endian_off and set its value
according to big_endian.
* gfortran.map: Add symbol for new _gfortran_transfer_character_wide.
* io/io.h: Add prototype declarations for new functions.
* io/list_read.c (list_formatted_read_scalar): Modify to handle kind=4.
(list_formatted_read): Calculate stride based on kind for character type
and use it when calling list_formatted_read_scalar.
* io/inquire.c (inquire_via_unit): Change l8_to_l4_offset to big_endian.
* io/open.c (st_open): Change l8_to_l4_offset to big_endian.
* io/read.c (read_a_char4): New function to handle formatted read.
* io/write.c: Define GFC_CHAR4(x) to improve readability of code.
(write_a_char4): New function to handle formatted write.
(write_character): Modify to accept the kind parameter and adjust for
endianess of the machine. (list_formatted_write): Calculate the stride
resulting from the kind and adjust the list_formatted_write_scalar call
accordingly. (nml_write_obj): Adjust calls to write_character.
(namelist_write): Likewise.
* io/transfer.c (formatted_transfer_scaler): Rename 'len' argument to
'kind' argument to better describe what it is. Add calls to new
functions for kind == 4. (formatted_transfer): Modify to handle the case
of type character and kind equals 4 to pass in the kind to the transfer
routines. (transfer_character_wide): Add this new function.
(transfer_array): Don't set kind to the character string length. Adjust
strides bases on character kind.
(unformatted_read): Adjust size based on kind for character types.
(unformatted_write): Likewise. (data_transfer_init): Change
l8_to_l4_offset to big_endian.
From-SVN: r136763
2008-06-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36420
PR libfortran/36421
PR libfortran/36422
* io/io.h: Add prototype for write_real.
* io/transfer.c (formatted_transfer_scalar): For FMT_G and width zero,
use write_real.
* io/format.c: Add zero width error message. (parse_format_list): Use
error message for FMT_A if followed by FMT_ZERO. Use zero width error
message for FMT_G if mode is READ or if -std=f95 or f2003. (fmormat0):
Fix typo in comment.
* io/write.c (write_a): Set wlen to len if FMT_G and length is zero.
(write_l): Add wlen variable and use it if FMT_G and width is zero.
(write_decimal): If FMT_G, set m to -1 to flag processor dependent
formatting. (write_real): Remove static declaration.
From-SVN: r136545
2008-05-17 Thomas Koenig <tkoenig@gcc.gnu.org>
* io/list_read.c (list_formatted_read_scalar): Declare
type as volatile to shut up compiler warning.
From-SVN: r135480
2008-05-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561
* io/io.h (struct fbuf): Change pointer to position offset.
* io/fbuf.c (fbuf_init): Reduce default size of buffer, ptr=>pos
changes.
(fbuf_reset): ptr=>pos changes.
(fbuf_alloc): If the request doesn't fit, don't waste memory by
keeping flushed bytes. ptr=>pos changes.
(fbuf_flush): ptr=>pos changes.
(fbuf_seek): Don't seek past the left tab limit, don't update active
byte count.
* io/open.c (new_unit): If RECL has been specified, used that as
initial buffer size.
From-SVN: r135433
2008-05-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36094
* runtime/error.c (show_locus): Provide modified error message when
filename has not yet been associated with a unit number.
* io/open.c (encoding_opt[]): Comment out "utf-8" option and add TODO.
From-SVN: r134876
* io/list_read.c (snprintf): Define if HAVE_SNPRINTF isn't defined.
(nml_read_obj): Add nml_err_msg_size argument. Pass it down to
recursive call. Use snprintf instead of sprintf when %s nl->var_name
is used.
(nml_get_obj_data): Add nml_err_msg_size argument. Pass it down to
nml_read_obj call. Use snprintf instead of sprintf when %s
nl->var_name is used. Pass nml_err_msg to nml_parse_qualifier instead
of parse_err_msg array. Append " for namelist variable " and
nl->var_name to it.
(namelist_read): Increase size of nml_err_msg array to 200. Pass
sizeof nml_err_msg as extra argument to nml_get_obj_data.
* gfortran.dg/namelist_47.f90: New test.
From-SVN: r134132
2008-04-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* io/open.c (edit_modes): Set flags.async. (new_unit) Set flags.async
and flags.status. (st_open): Initialize flags.async.
* io/list_read.c (read_charactor): Use delim_status instead of
flags.delim.
* io/read.c (read_x): Use pad_status instead of flags.pad.
* io/inquire.c (inquire_via_unit): Add new checks.
(inquire_via_filename): Likewise.
* io/io.h (st_parameter_inquire): Add new flags.
(st_parameter_dt): Likewise.
* io/unit.c (get_internal_unit): Set flags.async. (init_units): Set
flags.async.
* io/transfer.c: Add delim and pad option arrays. (read_sf): Use
pad_status instead of flags.pad. (read_block): Likewise.
(data_transfer_init): Set flags.async and add checks.
* io/write.c (write_character): Use delim_status.
(list_formatted_write_scalar): Likewise. (nml_write_obj): Likewise.
(namelist_write): Likewise.
From-SVN: r133988
2008-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* gfortran.map: Add new symbol, _gfortran_st_wait.
* libgfortran.h (st_paramter_common): Add new I/O parameters.
* open.c (st_option decimal_opt[], st_option encoding_opt[],
st_option round_opt[], st_option sign_opt[], st_option async_opt[]): New
parameter option arrays. (edit_modes): Add checks for new parameters.
(new_unit): Likewise. (st_open): Likewise.
* list_read.c (CASE_SEPERATORS): Add ';' as a valid separator.
(eat_separator): Handle deimal comma. (read_logical): Fix whitespace.
(parse_real): Handle decimal comma. (read_real): Handle decimal comma.
* read.c (read_a): Use decimal status flag to allow comma in place of a
decimal point. (read_f): Allow comma as acceptable character in float.
According to decimal flag, substitute a period for a comma.
(read_x): If decimal status flag is comma, disable the read_comma flag,
not allowing comma as a delimiter, an extension otherwise.
* io.h: (unit_decimal, unit_encoding, unit_round, unit_sign,
unit_async): New enumerators. Add all new I/O parameters.
* unix.c (unix_stream, int_stream): Add io_mode asychronous I/O control.
(move_pos_offset, fd_alloc_w_at): Fix some whitespace.
(fd_sfree): Use new enumerator. (fd_read): Likewise.
(fd_write): Likewise. (fd_close): Fix whitespace.
(fd_open): Use new enumertors. (tempfile, regular_file,
open_external): Fix whitespace. (output_stream, error_stream): Set
method. (stream_offset): Fix whitespace.
* transfer.c: (st_option decimal_opt[], sign_opt[], blank_opt[]): New
option arrays. (formatted_transfer_scalar): Set sf_read_comma flag
based on new decimal_status flag. (data_transfer_init): Initialize new
parameters. Add checks for decimal, sign, and blank. (st_wait): New stub.
* format.c: (format_lex): Add format specifiers DP, DC, and D.
(parse_format_list): Parse the new specifiers.
* write.c (write_decimal): Use new sign enumerators to set the sign.
(write_complex): Handle decimal comma and semi-colon separator.
(nml_write_obj): Likewise.
* write_float.def: Revise sign enumerators. (calculate_sign): Use new
sign enumerators. (output_float): Likewise. Use new decimal_status flag
to set the decimal character to a point or a comma.
From-SVN: r133943
2008-03-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35699
* io/transfer.c (write_buf): Don't pad the record, just return if the
data is NULL. (next_record_w): If there are bytes left in the record
for unformatted direct I/O, pad out the record with zero bytes.
From-SVN: r133699
2008-03-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35632
* io/transfer.c (data_transfer_init): Fix whitespace.
(next_record_w): Truncate the file only if the stream
position is short of the file end.
From-SVN: r133454
2008-03-19 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35627
* io/list_read.c (free_line): Clear the line buffer enable flag and
reset the index into line_buffer, aka item_count.
(next_char): Cleanup whitespace.
(read_logical): Use unget_char to assure that the first character of the
bad logical is saved in case it is part of an object name. Remove the
clearing of index and flag that is now in free_line.
(read_real): Likewise.
From-SVN: r133360
2008-03-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35617
* io/list_read.c (eat_separator): If next character after eatline is '!'
then eatline again.
From-SVN: r133302
PR libfortran/35293
* io/unix.c (fd_truncate): Fold s->special_file case into
success case of ftruncate/chsize call instead of the failure case.
Make failure case actually return failure. Properly update stream
pointers on failure. Call runtime_error for targets without
neither ftruncate nor chsize where such a call would be needed.
From-SVN: r132888
2008-02-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35132
* io/transfer.c (next_record_w): Truncate after the last record for
STREAM I/O.
PR libfortran/34954
* io/transfer.c (data_transfer_init): Initialize dtp->rec if writing.
PR libfortran/34974
* io/transfer.c (formatted_transfer_scalar): Flush the buffer if skips
is less than zero. (next_record_w): Use sseek to position the file to
the max position reached.
From-SVN: r132512
2008-02-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35036
* write_float.def (output_float): Add error checks for zero digits
after decimal point in E and D format specifiers.
From-SVN: r132510
2008-02-10 Danny Smith <dannysmith@users.sourceforge.net>
PR gcc/35063
* gthr-win32.h (__gthread_mutex_destroy_function): New function
to CloseHandle after unlocking to prevent accumulation of handle
count.
2008-02-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35063
* io/unit.c (destroy_unit_mutex): New function that uses
__gthread_mutex_destroy_function or pthread_mutex_destroy after
unlocking and before free_mem for final closure of I/O unit.
(delete_root): Use new function.
(free_internal_unit): Likewise.
(close_unit_1): Likewise.
From-SVN: r132217
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* io/transfer.c (next_record_w): Always move to the farthest
position when completing the record (also when we are
processing a slash edit descriptor).
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* gfortran.dg/x_slash_2.f: New test.
From-SVN: r131864
2008-01-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34876
* io/transfer.c (write_buf): Handle case of zero sized array.
(transfer_array): Set data pointer to NULL and size to zero. Then
make a data transfer and return.
From-SVN: r131848
2008-01-19 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/inquire.c (inquire_via_unit): If a unit is opened, return values
according to the open action for DIRECT, FORMATTED, and UNFORMATTED.
(inquire_via_filename): Return "UNKNOWN" for SEQUENTIAL, DIRECT,
FORAMATTED, and UNFORMATTED inquiries.
* io/unix.c (inquire_sequential): Return "UNKNOWN" when appropriate
for files that are not opened. (inquire_direct): Same.
(inquire_formatted): Same.
From-SVN: r131672
2008-01-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (formatted_transfer_scalar): Set max_pos to the greater
of the current max_pos or the newly calculated position.
From-SVN: r131640
2008-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34676
* io/list_read.c (next_char): Only save the EOF condition for later if
advance="no".
From-SVN: r131337
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* io/io.h: Adjust protoypes for open_internal(),
next_array_record() and init_loop_spec().
* io/list_read.c (next_char): Use argument "finished"
of next_array_record to check for end on internal file.
* io/unit.c: Calculate the offset for an array
internal file and supply this informatin to open_internal().
* io/unix.c (open_internal): Set the offset for the internal
file on open.
* io/transfer.c (init_loop_spec): Calculate the starting
record in case of negative strides. Return size of 0 for
an empty array.
(next_array_record): Use an extra flag to signal that the
array is finished.
(next_record_r): Use the new flag to next_array_record().
(next_record_w): Likewise.
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* gfortran.dg/internal_readwrite_1.f90: New test.
* gfortran.dg/internal_readwrite_2.f90: New test.
From-SVN: r131305
2007-12-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (read_sf): Check if readlen was less than the requested
number of bytes to read and if so, generate error.
From-SVN: r131177
2007-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/34427
* io/list_read.c (read_real): Handle intervening line ends and spaces.
(get_name): Don't push separators to saved_string.
(eat_separator): If in namelist mode eat spaces and line ends as well.
From-SVN: r131003
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* io/io.h: Add previous_nonadvancing_write to gfc_unit.
Add prototype for finish_last_advance_record.
* io/file_pos.c (st_backspace): Generate error if backspace is
attempted for direct access or unformatted stream.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the backspace.
(st_endfile): Generate error if endfile is attempted for
direct access.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the endfile.
(st_rewind): Generate error if rewind is attempted for
direct access.
* unit.c (close_unit_1): Move functionality to write
previously written bytes to...
(finish_last_advance_record): ... here.
* transfer.c (data_transfer_init): If reading, reset
previous_nonadvancing_write.
(finalize_transfer): Set the previous_noadvancing_write
flag if we are writing and ADVANCE="no" was specified.
Only call next_record() if advance="no" wasn't specified.
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* gfortran.dg/advance_6.f90: New test case.
* gfortran.dg/direct_io_7.f90: New test case.
* gfortran.dg/streamio_13.f90: New test case.
From-SVN: r130912
2007-12-02 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (read_block, read_block_direct, write_block, write_buf):
Don't seek if file position is already there for STREAM I/O.
(finalize_transfer): For STREAM I/O don't flush unless the file position
has moved past the start position before the transfer.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r130574
2007-11-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34291
* io/list_read.c (read_character): When reading an unquoted string,
return if special characters that could signify the end of the namelist
read are encountered.
From-SVN: r130548
2007-11-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (finalize_transfer): Do not flush for
unformatted STREAM I/O.
From-SVN: r129870
2007-10-18 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33795
* libgfortran.h: Add unbuffered_preconnected.
* io/unix.c (output_stream): Set stream unbuffered flag if
options.unbuffered_preconnected has been set.
(error_stream): Ditto.
* runtime/environ.c (variable_table): Add to environment variable table
the entry: GFORTRAN_UNBUFFERED_PRECONNECTED.
Co-Authored-By: Jerry DeLisle <jvdelisle@gcc.gnu.org>
From-SVN: r129470
2007-10-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33055
* io/inquire.c (inquire_via_unit): If inquiring by unit, check for
an error condition from the IOSTAT variable and set EXIST to false if
there was a bad unit number.
From-SVN: r129344
2007-10-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33672
* io/list_read.c (nml_parse_qualifier): Add character specific error
messages. Check for proper form of sub-string qualifiers. Return the
parsed_rank flag indicating a non-zero rank qualifier.
(nml_get_obj_data): Count the instances of non-zero rank qualifiers.
Issue an error if more that one non-zero rank qualifier is found.
From-SVN: r129309
2007-10-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/list_read.c (read_character): Use line_buffer to scan ahead for
object name or string when no delimiter is found.
From-SVN: r129016
2007-10-02 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/list_read.c (read_character): Use DELIM_APOSTROPHE and DELIM_QUOTE
and quote value in check of first character in string.
From-SVN: r128973
2007-09-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33400
* io/list_read.c (next_char): Interpret encountering the end of file the
first time as an end of line. Subsequent reads give EOF error.
From-SVN: r128868
PR libfortran/23272
* io/unix.c (id_from_handle, id_from_path, id_from_fd): New
functions.
(compare_file_filename, find_file, find_file0): Use the new
functions above.
* gfortran.dg/inquire_10.f90: New test.
From-SVN: r128636
PR libfortran/21185
* runtime/compile_options.c (set_options): Fix typo.
* runtime/main.c (store_exe_path): If getcwd is not available,
don't use it.
* intrinsics/getcwd.c: Same thing here.
* io/unix.c (fallback_access): New fallback function for access.
(fix_fd): Don't use dup if it's not available.
* configure.ac: Check for dup and getcwd.
* configure: Regenerate.
* config.h.in: Regenerate.
From-SVN: r128512
2007-09-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33307
* io/filepos.c (st_backspace): Don't truncate when already at the end
of the file.
From-SVN: r128253
2007-09-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/write.c (nml_write_obj): Set the delimiter correctly before calling
write_character. (namelist_write): Clean up the code a little and add
comments to clarify what its doing.
From-SVN: r128170
2007-03-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33225
* io/write.c (stdbool.h): Add include. (sign_t): Move typedef to
new file write_float.def. Include write_float.def.
(extract_real): Delete. (calculate_sign): Delete.
(calculate_exp): Delete. (calculate_G_format): Delete.
(output_float): Delete. (write_float): Delete.
* io/write_float.def (calculate_sign): Added.
(output_float): Refactored to be independent of kind and added to this
file for inclusion. (write_infnan): New function to write "Infinite" or
"NaN" depending on flags passed, independent of kind.
(CALCULATE_EXP): New macro to build kind specific functions. Use it.
(OUTPUT_FLOAT_FMT_G): New macro, likewise. Use it.
(DTOA, DTOAL): Macros to implement "decimal to ascii".
(WRITE_FLOAT): New macro for kind specific write_float functions.
(write_float): Revised function to determine kind and use WRITE_FLOAT
to implement kind specific output.
From-SVN: r128114
2007-09-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/list_read.c (read_character): Use DELIM_APOSTROPHE and DELIM_QUOTE
in check of first character in string.
From-SVN: r128057
2007-08-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/write.c (stdbool.h): Add include. (sign_t): Move typedef to
new file write_float.def. Include write_float.def.
(extract_real): Delete. (calculate_sign): Delete.
(calculate_exp): Delete. (calculate_G_format): Delete.
(output_float): Delete. (write_float): Delete.
* io/write_float.def (calculate_sign): Added.
(output_float): Refactored to be independent of kind and added to this
file for inclusion. (write_infnan): New function to write "Infinite" or
"NaN" depending on flags passed, independent of kind.
(CALCULATE_EXP): New macro to build kind specific functions. Use it.
(OUTPUT_FLOAT_FMT_G): New macro, likewise. Use it.
(DTOA, DTOAL): Macros to implement "decimal to ascii".
(WRITE_FLOAT): New macro for kind specific write_float functions.
(write_float): Revised function to determine kind and use WRITE_FLOAT
to implement kind specific output.
From-SVN: r127846
2007-08-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/33055
* trans-io.c (create_dummy_iostat): New function to create a unique
dummy variable expression to use with IOSTAT.
(gfc_trans_inquire): Use the new function to pass unit number error info
to run-time library if a regular IOSTAT variable was not given.
PR libfortran/33055
* io/inquire.c (inquire_via_unit): If inquiring by unit, check for
an error condition from the IOSTAT variable and set EXIST to false if
there was a bad unit number.
From-SVN: r127817
2007-08-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33039
* io/list_read.c (find_nml_name): Check for a space after a namelist
name match.
From-SVN: r127332
2007-08-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/32977
* io/unix.c: If there is no vsnprintf, use vsprintf and issue
a fatal error when a buffer overrun occurs.
From-SVN: r127187
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* trans-io.c (gfc_build_io_library_fndecls): Change to use
gfc_array_index_type for array descriptor triplets instead of
gfc_int4_type_node.
libgfortran ChangeLog:
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* io/transfer.c (st_set_nml_var_dim): Use index_type instead of
GFC_INTEGER_4 for array descriptor triplets.
From-SVN: r126992
2007-07-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
PR fortran/32611
* runtime/compile_options.c (set_std): Remove.
(set_options): New function.
(init_compile_options): Add initialization for -fsign-zero option.
* gfortran.map (GFORTRAN_1.0): Rename _gfortran_set_std into
_gfortran_set_options.
* libgfortran.h (compile_options_t): Add sign_zero field.
* io/write.c (output_float): Use the sign bit of the value to determine
if a negative sign should be emitted for zero values. Do not emit the
negative sign for zero if -fno-sign-zero was set during compile.
Co-Authored-By: Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
From-SVN: r126654
2007-07-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32752
* io/unix.c (unix_stream): Move buffer pointer adjacent to small_buffer.
* io/transfer.c (formatted_transfer_scalar): If stream I/O, set
bytes_used to zero. Fix off by one error in calculation of pos and
skips. Eliminate duplicate pending_spaces check.
From-SVN: r126652
2007-07-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32702
* io/unix.c (unix_stream): Restore buffer pointer and small_buffer.
(fd_alloc): If the number of bytes needed is greater than the default
BUFFER_SIZE, allocate a new buffer large enough. Free the old buffer if
necessary. (fd_sfree): Restore use of buffer pointer.
(fd_close): Likewise. (fd_open): Likewise.
(init_error_stream): Likewise.
From-SVN: r126510
2007-07-02 Steven G. Kargl <kargl@gcc.gnu.org>
Restore collateral damage from ISO C Binding merge.
2007-06-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32456
* io/unit.c (filename_from_unit): Don't use find_unit, instead search
for unit directly.
From-SVN: r126238
2007-07-01 Christopher D. Rickett <crickett@lanl.gov>
* interface.c (gfc_compare_derived_types): Special case for comparing
derived types across namespaces.
(gfc_compare_types): Deal with BT_VOID.
(compare_parameter): Use BT_VOID to accept ISO C Binding pointers.
* trans-expr.c (gfc_conv_function_call): Remove setting parm_kind
to SCALAR
(gfc_conv_initializer): Deal with ISO C Binding NULL_PTR and
NULL_FUNPTR.
(gfc_conv_expr): Convert expressions for ISO C Binding derived types.
* symbol.c (gfc_set_default_type): BIND(C) variables should not be
implicitly declared.
(check_conflict): Add BIND(C) and check for conflicts.
(gfc_add_explicit_interface): Whitespace.
(gfc_add_is_bind_c): New function.
(gfc_copy_attr): Use it.
(gfc_new_symbol): Initialize ISO C Binding objects.
(get_iso_c_binding_dt): New function.
(verify_bind_c_derived_type): Ditto.
(gen_special_c_interop_ptr): Ditto.
(add_formal_arg): Ditto.
(gen_cptr_param): Ditto.
(gen_fptr_param): Ditto.
(gen_shape_param): Ditto.
(add_proc_interface): Ditto.
(build_formal_args): Ditto.
(generate_isocbinding_symbol): Ditto.
(get_iso_c_sym): Ditto.
* decl.c (num_idents_on_line, has_name_equals): New variables.
(verify_c_interop_param): New function.
(build_sym): Finish binding labels and deal with COMMON blocks.
(add_init_expr_to_sym): Check if the initialized expression is
an iso_c_binding named constants
(variable_decl): Set ISO C Binding type_spec components.
(gfc_match_kind_spec): Check match for C interoperable kind.
(match_char_spec): Fix comment. Chnage gfc_match_small_int
to gfc_match_small_int_expr. Check for C interoperable kind.
(match_type_spec): Clear the current binding label.
(match_attr_spec): Add DECL_IS_BIND_C. If BIND(C) is found, use it
to set attributes.
(set_binding_label): New function.
(set_com_block_bind_c): Ditto.
(verify_c_interop): Ditto.
(verify_com_block_vars_c_interop): Ditto.
(verify_bind_c_sym): Ditto.
(set_verify_bind_c_sym): Ditto.
(set_verify_bind_c_com_block): Ditto.
(get_bind_c_idents): Ditto.
(gfc_match_bind_c_stmt): Ditto.
(gfc_match_data_decl): Use num_idents_on_line.
(match_result): Deal with right paren in BIND(C).
(gfc_match_suffix): New function.
(gfc_match_function_decl): Use it. Code is re-arranged to deal with
ISO C Binding result clauses.
(gfc_match_subroutine): Deal with BIND(C).
(gfc_match_bind_c): New function.
(gfc_get_type_attr_spec): New function. Code is re-arranged in and
taken from gfc_match_derived_decl.
(gfc_match_derived_decl): Add check for BIND(C).
* trans-common.c: Forward declare gfc_get_common.
(gfc_sym_mangled_common_id): Change arg from 'const char *name' to
'gfc_common_head *com'. Check for ISO C Binding of the common block.
(build_common_decl): 'com->name' to 'com in SET_DECL_ASSEMBLER_NAME.
* gfortran.h: Add GFC_MAX_BINDING_LABEL_LEN
(bt): Add BT_VOID
(sym_flavor): Add FL_VOID.
(iso_fortran_env_symbol, iso_c_binding_symbol, intmod_id): New enum
(CInteropKind_t): New struct.
(c_interop_kinds_table): Use it. Declare an array of structs.
(symbol_attribute): Add is_bind_c, is_c_interop, and is_iso_c
bitfields.
(gfc_typespec): Add is_c_interop; is_iso_c, and f90_type members.
(gfc_symbol): Add from_intmod, intmod_sym_id, binding_label, and
common_block members.
(gfc_common_head): Add binding_label and is_bind_c members.
(gfc_gsymbol): Add sym_name, mod_name, and binding_label members.
Add prototypes for get_c_kind, gfc_validate_c_kind,
gfc_check_any_c_kind, gfc_add_is_bind_c, gfc_add_value,
verify_c_interop, verify_c_interop_param, verify_bind_c_sym,
verify_bind_c_derived_type, verify_com_block_vars_c_interop,
generate_isocbinding_symbol, get_iso_c_sym, gfc_iso_c_sub_interface
* iso-c-binding.def: New file. This file contains the definitions
of the types provided by the Fortran 2003 ISO_C_BINDING intrinsic
module.
* trans-const.c (gfc_conv_constant_to_tree): Deal with C_NULL_PTR
or C_NULL_FUNPTR expressions.
* expr.c (gfc_copy_expr): Add BT_VOID case. For BT_CHARACTER, the
ISO C Binding requires a minimum string length of 1 for '\0'.
* module.c (intmod_sym): New struct.
(pointer_info): Add binding_label member.
(write_atom): Set len to 0 for NULL pointers. Check for NULL p and *p.
(ab_attribute): Add AB_IS_BIND_C, AB_IS_C_INTEROP and AB_IS_ISO_C.
(attr_bits): Add "IS_BIND_C", "IS_C_INTEROP", and "IS_ISO_C".
(mio_symbol_attribute): Deal with ISO C Binding attributes.
(bt_types): Add "VOID".
(mio_typespec): Deal with ISO C Binding components.
(mio_namespace_ref): Add intmod variable.
(mio_symbol): Check for symbols from an intrinsic module.
(load_commons): Check for BIND(C) common block.
(read_module): Read binding_label and use it.
(write_common): Add label. Write BIND(C) info.
(write_blank_common): Blank commons are not BIND(C). Explicitly
set is_bind_c=0.
(write_symbol): Deal with binding_label.
(sort_iso_c_rename_list): New function.
(import_iso_c_binding_module): Ditto.
(create_int_parameter): Add to args.
(use_iso_fortran_env_module): Adjust to deal with iso_c_binding
intrinsic module.
* trans-types.c (c_interop_kinds_table): new array of structs.
(gfc_validate_c_kind): New function.
(gfc_check_any_c_kind): Ditto.
(get_real_kind_from_node): Ditto.
(get_int_kind_from_node): Ditto.
(get_int_kind_from_width): Ditto.
(get_int_kind_from_minimal_width): Ditto.
(init_c_interop_kinds): Ditto.
(gfc_init_kinds): call init_c_interop_kinds.
(gfc_typenode_for_spec): Adjust for BT_VOID and ISO C Binding pointers.
Adjust handling of BT_DERIVED.
(gfc_sym_type): Whitespace.
(gfc_get_derived_type): Account for iso_c_binding derived types
* resolve.c (is_scalar_expr_ptr): New function.
(gfc_iso_c_func_interface): Ditto.
(resolve_function): Use gfc_iso_c_func_interface.
(set_name_and_label): New function.
(gfc_iso_c_sub_interface): Ditto.
(resolve_specific_s0): Use gfc_iso_c_sub_interface.
(resolve_bind_c_comms): New function.
(resolve_bind_c_derived_types): Ditto.
(gfc_verify_binding_labels): Ditto.
(resolve_fl_procedure): Check for ISO C interoperability.
(resolve_symbol): Check C interoperability.
(resolve_types): Walk the namespace. Check COMMON blocks.
* trans-decl.c (gfc_sym_mangled_identifier): Prevent the mangling
of identifiers that have an assigned binding label.
(gfc_sym_mangled_function_id): Use the binding label rather than
the mangled name.
(gfc_finish_var_decl): Put variables that are BIND(C) into a common
segment of the object file, because this is what C would do.
(gfc_create_module_variable): Conver to proper types
(set_tree_decl_type_code): New function.
(generate_local_decl): Check dummy variables and derived types for
ISO C Binding attributes.
* match.c (gfc_match_small_int_expr): New function.
(gfc_match_name_C): Ditto.
(match_common_name): Deal with ISO C Binding in COMMON blocks
* trans-io.c (transfer_expr): Deal with C_NULL_PTR or C_NULL_FUNPTR
expressions
* match.h: Add prototypes for gfc_match_small_int_expr,
gfc_match_name_C, match_common_name, set_com_block_bind_c,
set_binding_label, set_verify_bind_c_sym,
set_verify_bind_c_com_block, get_bind_c_idents,
gfc_match_bind_c_stmt, gfc_match_suffix, gfc_match_bind_c,
gfc_get_type_attr_spec
* parse.c (decode_statement): Use gfc_match_bind_c_stmt
(parse_derived): Init *derived_sym = NULL, and gfc_current_block
later for valiadation.
* primary.c (got_delim): Set ISO C Binding components of ts.
(match_logical_constant): Ditto.
(match_complex_constant): Ditto.
(match_complex_constant): Ditto.
(gfc_match_rvalue): Check for existence of at least one arg for
C_LOC, C_FUNLOC, and C_ASSOCIATED.
* misc.c (gfc_clear_ts): Clear ISO C Bindoing components in ts.
(get_c_kind): New function.
2007-07-01 Christopher D. Rickett <crickett@lanl.gov>
* Makefile.in: Add support for iso_c_generated_procs.c and
iso_c_binding.c.
* Makefile.am: Ditto.
* intrinsics/iso_c_generated_procs.c: New file containing helper
functions.
* intrinsics/iso_c_binding.c: Ditto.
* intrinsics/iso_c_binding.h: New file
* gfortran.map: Include the __iso_c_binding_c_* functions.
* libgfortran.h: define GFC_NUM_RANK_BITS.
2007-06-23 Christopher D. Rickett <crickett@lanl.gov>
* bind_c_array_params.f03: New files for Fortran 2003 ISO C Binding.
* bind_c_coms.f90: Ditto.
* bind_c_coms_driver.c: Ditto.
* bind_c_dts.f90: Ditto.
* bind_c_dts_2.f03: Ditto.
* bind_c_dts_2_driver.c: Ditto.
* bind_c_dts_3.f03: Ditto.
* bind_c_dts_4.f03: Ditto.
* bind_c_dts_driver.c: Ditto.
* bind_c_implicit_vars.f03: Ditto.
* bind_c_procs.f03: Ditto.
* bind_c_usage_2.f03: Ditto.
* bind_c_usage_3.f03: Ditto.
* bind_c_usage_5.f03: Ditto.
* bind_c_usage_6.f03: Ditto.
* bind_c_usage_7.f03: Ditto.
* bind_c_vars.f90: Ditto.
* bind_c_vars_driver.c: Ditto.
* binding_c_table_15_1.f03: Ditto.
* binding_label_tests.f03: Ditto.
* binding_label_tests_10.f03: Ditto.
* binding_label_tests_10_main.f03: Ditto.
* binding_label_tests_11.f03: Ditto.
* binding_label_tests_11_main.f03: Ditto.
* binding_label_tests_12.f03: Ditto.
* binding_label_tests_13.f03: Ditto.
* binding_label_tests_13_main.f03: Ditto.
* binding_label_tests_14.f03: Ditto.
* binding_label_tests_2.f03: Ditto.
* binding_label_tests_3.f03: Ditto.
* binding_label_tests_4.f03: Ditto.
* binding_label_tests_5.f03: Ditto.
* binding_label_tests_6.f03: Ditto.
* binding_label_tests_7.f03: Ditto.
* binding_label_tests_8.f03: Ditto.
* binding_label_tests_9.f03: Ditto.
* c_assoc.f90: Ditto.
* c_assoc_2.f03: Ditto.
* c_f_pointer_shape_test.f90: Ditto.
* c_f_pointer_tests.f90: Ditto.
* c_f_tests_driver.c: Ditto.
* c_funloc_tests.f03: Ditto.
* c_funloc_tests_2.f03: Ditto.
* c_funloc_tests_3.f03: Ditto.
* c_funloc_tests_3_funcs.c: Ditto.
* c_kind_params.f90: Ditto.
* c_kind_tests_2.f03: Ditto.
* c_kinds.c: Ditto.
* c_loc_driver.c: Ditto.
* c_loc_test.f90: Ditto.
* c_loc_tests_2.f03: Ditto.
* c_loc_tests_2_funcs.c: Ditto.
* c_loc_tests_3.f03: Ditto.
* c_loc_tests_4.f03: Ditto.
* c_loc_tests_5.f03: Ditto.
* c_loc_tests_6.f03: Ditto.
* c_loc_tests_7.f03: Ditto.
* c_loc_tests_8.f03: Ditto.
* c_ptr_tests.f03: Ditto.
* c_ptr_tests_10.f03: Ditto.
* c_ptr_tests_5.f03: Ditto.
* c_ptr_tests_7.f03: Ditto.
* c_ptr_tests_7_driver.c: Ditto.
* c_ptr_tests_8.f03: Ditto.
* c_ptr_tests_8_funcs.c: Ditto.
* c_ptr_tests_9.f03: Ditto.
* c_ptr_tests_driver.c: Ditto.
* c_size_t_driver.c: Ditto.
* c_size_t_test.f03: Ditto.
* com_block_driver.f90: Ditto.
* global_vars_c_init.f90: Ditto.
* global_vars_c_init_driver.c: Ditto.
* global_vars_f90_init.f90: Ditto.
* global_vars_f90_init_driver.c: Ditto.
* interop_params.f03: Ditto.
* iso_c_binding_only.f03: Ditto.
* iso_c_binding_rename_1.f03: Ditto.
* iso_c_binding_rename_1_driver.c: Ditto.
* iso_c_binding_rename_2.f03: Ditto.
* iso_c_binding_rename_2_driver.c: Ditto.
* kind_tests_2.f03: Ditto.
* kind_tests_3.f03: Ditto.
* module_md5_1.f90: Ditto.
* only_clause_main.c: Ditto.
* print_c_kinds.f90: Ditto.
* test_bind_c_parens.f03: Ditto.
* test_c_assoc.c: Ditto.
* test_com_block.f90: Ditto.
* test_common_binding_labels.f03: Ditto.
* test_common_binding_labels_2.f03: Ditto.
* test_common_binding_labels_2_main.f03: Ditto.
* test_common_binding_labels_3.f03: Ditto.
* test_common_binding_labels_3_main.f03: Ditto.
* test_only_clause.f90: Ditto.
* use_iso_c_binding.f90: Ditto.
* value_5.f90: Ditto.
* value_test.f90: Ditto.
* value_tests_f03.f90: Ditto.
From-SVN: r126185
2007-07-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32554
* io/write.c (output_float): Set edigits to a fixed size, avoiding
variation in field width calculation and eliminate buffer overrun.
From-SVN: r126173
2007-06-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32456
* io/unit.c (filename_from_unit): Don't use find_unit, instead search
for unit directly.
From-SVN: r126119
2007-06-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32456
* runtime/error.c (show_locus): Update to emit the unit number
and file name involved with the error. Use new function
filename_from_unit.
* libgfortran.h (filename_from_unit): Declare new function.
* io/unit.c (init_units): Set the unit file name for stdin, stdout,
and stderr for use later in error reporting.
(filename_from_unit): Add this new function.
From-SVN: r125989
2007-06-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32446
* io/write.c (output_float): Calculate ndigits correctly for large
numbered formats that must pad zeros before the decimal point.
From-SVN: r125985
2007-06-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32235
* io/transfer.c (st_read): Remove test for end of file condition.
(next_record_r): Add test for end of file condition.
From-SVN: r125606
2007-05-27 Janne Blomqvist <jb@gcc.gnu.org>
* runtime/string.c (compare0): Use gfc_charlen_type instead of int.
(fstrlen): Likewise.
(find_option): Likewise.
(fstrcpy): Use gfc_charlen_type instead of int, return length.
(cf_strcpy): Likewise.
* libgfortran.h: Change string prototypes to use gfc_charlen_type.
* io/open.c (new_unit): Use snprintf if available.
* io/list_read.c (nml_touch_nodes): Use memcpy instead of strcpy/strcat.
(nml_read_obj): Likewise.
* io/transfer.c (st_set_nml_var): Likewise.
* io/write.c (output_float): Use snprintf if available.
(nml_write_obj) Use memcpy instead of strcpy/strcat.
From-SVN: r125100
2007-05-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (unformatted_read): Use size from front end eliminating
use of size_from_real_kind. (unformatted_write): Ditto.
From-SVN: r125064
2007-05-06 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31201
* runtime/error.c (runtime_error_at): New function.
(generate_error): Export this function.
* gfortran.map: Add _gfortran_generate_error and
_gfortran_runtime_error_at.
* libgfortran.h: Add comment to reference error codes in front end.
(library_start): Locate prototype with library_end macro and add
a new comment. Add prototype for runtime_error_at. Export prototype for
generate_error.
* io/lock.c (library_start): Fix check for error condition.
* io/transfer.c (data_transfer_init): Add library check.
From-SVN: r124479
PR libfortran/31210
* io/transfer.c (transfer_character): Avoid passing a NULL
pointer as source to the transfer routines, if the string length
is zero.
From-SVN: r124428
2007-04-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31501
* io/list_read.c (next_char): Fix whitespace.
* io/io.h: Remove prototypes and define macros for is_array_io,
is_stream_io, and is_internal_unit.
* io/unit.c (is_array_io), (is_internal_unit), (is_stream_io): Delete
these functions.
* io/transfer.c (read_sf): Change handling of internal_unit to make a
single call to salloc_r and use memcpy to transfer the data.
From-SVN: r124266
2007-04-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31532
* io/file_pos.c (st_backspace): Set flags.position for end of file
condition and use new function update_position.
(st_endfile): Use new function update_position.
* io/io.h: Add prototype for new function.
* io/inquire.c (inquire_via_unit): If not direct access, set NEXTREC
to zero.
* io/unit.c (update_position): New function to update position info
used by inquire.
* io/transfer.c (next_record): Fix typo and use new function.
From-SVN: r124252
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* io/transfer.c (read_block_direct): Instead of calling us_read,
set dtp->u.p.current_unit->current_record = 0 so that pre_position
will read the record marker.
(data_transfer_init): For different error conditions, call
generate_error, then return.
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* gfortran.dg/backspace_8.f: New test case.
From-SVN: r124079
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/open.c (test_endfile): Delete this function.
(edit_modes): Delete call to test_endfile.
(new_unit): Likewise.
* io/io.h: Delete prototype for test_endfile.
* io/transfer.c (next_record_r): Remove use of test_endfile.
(st_read): Add test for end file condition and adjust status.
From-SVN: r123403
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31366
* io/transfer.c (read_block_direct): Do not generate error when reading
past EOF on a short record that is less than the RECL= specified.
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31207
* io/unit.c (close_unit_1): If there are bytes previously written from
ADVANCE="no", move to the end before closing.
From-SVN: r123401
2007-03-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/transfer.c (next_record_r): Do not call test_endfile if in namelist
mode.
From-SVN: r123284
2007-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31199
*io/io.h: Add saved_pos to gfc_unit structure.
*io/open.c (new_unit): Initialize saved_pos.
*io/transfer.c (data_transfer_init): Set max_pos to value in saved_pos.
(next_record_w): Fix whitespace.
(finalze_transfer): Calculate max_pos for ADVANCE="no" and save it for
later use. If not ADVANCE="no" set saved_pos to zero.
From-SVN: r123205
2007-03-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/file_position (st_rewind): Fix comments. Remove use of
test_endfile. Don't seek if already at 0 position. Use new is_special
function to set endfile state.
* io/open.c (test_endfile): Delete this function.
* io/io.h: Delete prototype for test_endfile. Add prototype
for is_special.
* io/unix.c (is_special): New function. Fix whitespace.
* io/transfer.c (next_record_r): Remove use of test_endfile.
From-SVN: r123038
2007-03-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31051
* io/transfer.c (formatted_transfer_scalar): Adjust position for pending
spaces when in writing mode. Clean up some formatting.
From-SVN: r122940
2007-03-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31099
* io/open.c (new_unit): Initialize bytes_left and recl_subrecord.
* io/transfer.c (next_record_w): Set bytes left to record length for
sequential unformatted I/O.
(next_record_r): Ditto.
(read_block_direct): Fix test for exceeding bytes_left.
From-SVN: r122763
2007-02-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30910
* io/write.c (output_float): Add condition of format F only for
special case rounding with zero precision.
From-SVN: r122250
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* trans-expr.c (gfc_conv_aliased_arg): Remove static attribute
from function and make sure that substring lengths are
translated.
(is_aliased_array): Remove static attribute.
* trans.c : Add prototypes for gfc_conv_aliased_arg and
is_aliased_array.
* trans-io.c (set_internal_unit): Add the post block to the
arguments of the function. Use is_aliased_array to check if
temporary is needed; if so call gfc_conv_aliased_arg.
(build_dt): Pass the post block to set_internal_unit and
add to the block after all io activiy is done.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* io/transfer.c (init_loop_spec, next_array_record): Change to
lbound rather than unity base.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
* gfortran.dg/arrayio_11.f90.f90: New test.
PR fortran/30626
* gfortran.dg/arrayio_12.f90.f90: New test.
From-SVN: r121500
2007-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30162
* io/unix.c (fd_flush): Don't seek if file is not seekable, defined as
s->file_length == -1.
(fd_alloc_w_at): Do not adjust file_length if file is not seekable.
(fd_seek): If not seekable, just return success.
(fd_truncate): If not seekable, no need to truncate. Return failure if
seek fails and the stream is not a pipe.
(fd_to_stream): Make test for non-seekable file more robust.
From-SVN: r120512
2006-12-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30014
*io/io.h (st_parameter_dt): Change *size and *iolength type to
GFC_IO_INT.
*io/transfer.c (finalize_transfer): Cast dtp->u.p.size_used to
GFC_IO_INT. (iolength_transfer): Cast size * nelems to GFC_IO_INT.
From-SVN: r120234
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* gfortran.dg/read_eof_4.f90: Add tests.
* gfortran.dg/readwrite_unf_direct_eor_1.f90: New test.
* gfortran.dg/unf_read_corrupted_1.f90: New test.
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* libgfortran.h: Add ERROR_CORRUPT_FILE to error_codes.
* runtime/error.c (translate_error): Add handling for
ERROR_CORRUPT_FILE.
* io/transfer.c (read_block_direct): Add comment about
EOR for stream files.
Remove test for no bytes left for direct access files.
Generate an ERROR_SHORT_RECORD if the read was short.
For unformatted sequential files: Check endfile condition.
Remove test for no bytes left. End of file here means
that the file structure has been corrupted. Pre-position
the file for the next record in case of error.
(write_buf): Whitespace fix. Subtract the number of bytes
written from bytes_left.
From-SVN: r119592
2006-12-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/30005
* io/open.c: Add errno.h include.
(new_unit): Add new error messages with file name for file open.
From-SVN: r119530
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.dg/convert_implied_open.f90: Change to
new default record length.
* gfortran.dg/unf_short_record_1.f90: Adapt to
new error message.
* gfortran.dg/unformatted_subrecords_1.f90: New test.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.h (gfc_option_t): Add max_subrecord_length.
(top level): Define MAX_SUBRECORD_LENGTH.
* lang.opt: Add option -fmax-subrecord-length=.
* trans-decl.c: Add new function set_max_subrecord_length.
(gfc_generate_function_code): If we are within the main
program and max_subrecord_length has been set, call
set_max_subrecord_length.
* options.c (gfc_init_options): Add defaults for
max_subrecord_lenght, convert and record_marker.
(gfc_handle_option): Add handling for
-fmax_subrecord_length.
* invoke.texi: Document the new default for
-frecord-marker=<n>.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* libgfortran/libgfortran.h (compile_options_t): Add
record_marker. (top level): Define GFC_MAX_SUBRECORD_LENGTH.
* runtime/compile_options.c (set_record_marker): Change
default to four-byte record marker.
(set_max_subrecord_length): New function.
* runtime/error.c (translate_error): Change error message
for short record on unformatted read.
* io/io.h (gfc_unit): Add recl_subrecord, bytes_left_subrecord
and continued.
* io/file_pos.c (unformatted_backspace): Change default of record
marker size to four bytes. Loop over subrecords.
* io/open.c: Default recl is max_offset. If
compile_options.max_subrecord_length has been set, set set
u->recl_subrecord to its value, to the maximum value otherwise.
* io/transfer.c (top level): Add prototypes for us_read, us_write,
next_record_r_unf and next_record_w_unf.
(read_block_direct): Separate codepaths for unformatted direct
and unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(write_buf): Separate codepaths for unformatted direct and
unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(us_read): Add parameter continued (to indicate that bytes_left
should not be intialized). Change default of record marker size
to four bytes. Use subrecord. If the subrecord length is smaller than
zero, this indicates a continuation.
(us_write): Add parameter continued (to indicate that the continued
flag should be set). Use subrecord.
(pre_position): Use 0 for continued on us_write and us_read calls.
(skip_record): New function.
(next_record_r_unf): New function.
(next_record_r): Use next_record_r_unf.
(write_us_marker): Default size for record markers is four bytes.
(next_record_w_unf): New function.
(next_record_w): Use next_record_w_unf.
From-SVN: r119412
2006-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/io.h (unit_flags): Add new flag has_recl.
* io.open.c (new_unit): Set flag if RECL= was specified.
* io/transfer.c (us_write): If flag set, leave recl as initialized by
new_unit.
From-SVN: r119087
* trans-decl.c (gfc_get_symbol_decl): Fix formatting.
* io/open.c (new_unit): Format %d expects an int variable.
* runtime/error.c (show_locus): Format %d expects an int variable.
From-SVN: r118887
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* libgfortran.h: Add ERROR_SHORT_RECORD
* runtime/error.c (translate_error): Add case
for ERROR_SHORT_RECORD.
* io/transfer.c (read_block_direct): Separate codepaths
for stream and record unformatted I/O. Remove unneeded
tests for standard input, padding and formatted I/O.
If the record is short, read in as much data as possible,
then raise the error.
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* gfortran.dg/unf_short_record_1.f90: New test.
From-SVN: r118341
2006-10-28 Tobias Burnus <burnus@net-b.de>
PR fortran/29625
* io/transfer.c (formatted_transfer_scalar): Allow binary edit
descriptors for real variables; give error for BOZ edit
descriptor for non-integers when using -std=f*.
From-SVN: r118111
2006-10-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29563
* io/io.h (st_parameter_dt): Add new flag at_eof.
* io/list_read.c (next_char): Set flag when EOF and return '\n' to
signal EOR. Check flag on next call and jump out.
* io/unit.c (get_internal_unit): Initialize new flag.
From-SVN: r118059
2006-10-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29277
* io/write.c (write_a): Add conversion of LF to CR-LF for systems with
#define HAVE_CRLF.
From-SVN: r117866
2006-10-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29277
* io/list_read.c (next_char): Update strm_pos.
(eat_separator): Delete extra call to unget_char.
* io/transfer.c (read_block): Use read_sf for formatted stream I/O.
(next_record_r): Update strm_pos for formatted stream I/O and handle
end-of-record correctly.
(next_record_w): Ditto.
(next_record): Enable next record (r/w) functions and update strm_pos.
(finalize_transfer): Call next_record to finish the record.
From-SVN: r117846
2006-08-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/28354
* io/write.c: Check for special case of zero precision in format
and pre-round the real value.
From-SVN: r116502
2006-08-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25828
* libgfortran.h: Rename GFC_LARGE_IO_INT to GFC_IO_INT.
* io/file_pos.c (st_backspace): Ignore if access=STREAM.
(st_rewind): Handle case of access=STREAM.
* io/open.c (access_opt): Add STREAM_ACCESS.
(edit_modes): Set current_record to zero only if not STREAM.
(new_unit): Initialize maxrec, recl, and last_record for STREAM.
* io/read.c (read_x): Advance file position for STREAM.
* io/io.h (enum unit_access): Align IOPARM flags with frontend.
Add ACCESS_STREAM. Add prototype for is_stream_io () function.
Use GFC_IO_INT.
* io/inquire.c (inquire_via_unit): Add text for access = "STREAM".
* io/unit.c (is_stream_io): New function to return true if access =
STREAM.
* io/transfer.c (file_mode): Add modes for unformatted stream and
formatted stream. (current_mode): Return appropriate file mode based
on access flags.
(read_block): Handle formatted stream reads.
(read_block_direct): Handle unformatted stream reads.
(write_block): Handle formatted stream writes.
(write_buf): Handle unformatted stream writes.
(unformatted_read): Fix up, use temporary for size.
(pre_position): Position file for STREAM access.
(data_transfer_init): Initialize for stream access, skip irrelevent
error checks.
(next_record_r),(next_record_w), and (next_record): Do nothing for
stream I/O.
(finalize_transfer): Flush when all done if stream I/O.
From-SVN: r116172
2006-07-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/28335
* file_position.c (st_flush): Add clearer error when UNIT does not
exist. Add reference to standard in comment.
From-SVN: r115835
PR libgfortran/258335
* close.c (st_close): Add error when UNIT does not exist.
* file_position.c (st_flush): Add error when UNIT does not exist.
From-SVN: r115749
2006-07-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/28339
* io/transfer.c (next_record_w): Use next_array_record result to set
END_FILE. (write_block): Test for END_FILE before the next write occurs.
* io/unit.c (get_internal_unit): Initialize iunit->endfile for internal
unit.
From-SVN: r115670
2006-07-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27704
* runtime/error.c (notify_std): Pass common flags into function. Use
flags to show locus of error or warning.
* libgfortran.h: Add enum try. Add prototype for notify_std.
* io/open.c (edit_modes): Allow status="old" and add extension to
allow status="scratch"
*io/list_read.c (nml_read_obj): Update call to notify_std.
*io/io.h: Remove enum try and prototype for notify_std.
*io/transfer.c (read_sf): Update call to notify_std.
*io/format.c (parse_format_list): Update call to notify_std.
From-SVN: r115168
2006-05-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27634
* io/format.c (parse_format_list): Allow missing period in format only
if -std=legacy.
From-SVN: r114212
2006-05-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/24459
* io/list_read.c (nml_parse_qualifier): Leave loop spec end value
at default value unless -std=f95 or if an array section
is specified in namelist input. Warn if -pedantic.
* io/io.h (st_parameter_dt): Add expanded_read flag.
From-SVN: r113924
2006-05-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27575
* io/transfer.c (read_block): Add check for end file condition.
(read_block_direct): Add check for end file condition.
From-SVN: r113837
2006-04-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/20257
* io/io.h: Add prototypes for get_internal_unit and free_internal_unit.
* io/unit.c (get_internal_unit): Initialize unit number, not zero.
(free_internal_unit): New function to consolidate freeing memory.
(get_unit): Initialize internal_unit_desc to NULL when unit is
external.
* io/unix.c (mem_close): Check for not NULL before freeing memory.
* io/transfer.c (read_block): Reset bytes_left and skip error if unit
is preconnected and default record length is reached.
(read_block_direct): Ditto.
(write_block): Ditto.
(write_buf): Ditto.
(data_transfer_init): Only flush if not internal unit.
(finalize_transfer): Ditto and delete code to free memory used by
internal units.
(st_read_done): Use new function - free_internal_unit.
(st_write_done): Use new function - free_internal unit.
From-SVN: r113190
2006-04-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27138
* io/list_read.c (eat_line): New function.
(parse_repeat): Use new function and free_saved.
(read_logical): Same.
(read_integer): Use new function.
(parse_real): Use nml_bad_return and new function.
(read_complex): Use new function and free_saved.
(read_real): Same.
From-SVN: r112999
2006-04-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26766
* io/io.h: Add bit to identify associated unit as internal.
* io/unit.c (get_external_unit): Renamed the find_unit_1 function to
reflect the external unit functionality vs internal unit.
(get_internal_unit): New function to allocate and initialize an internal
unit structure.
(get_unit): Use get_internal_unit and get_external_unit.
(is_internal_unit): Revised to use new bit added in io.h.
* io/transfer.c (data_transfer_init): Fix line width.
(st_read_done): Free memory allocated for internal unit.
(st_write_done): Add test to only flush and truncate when not an
internal unit. Free memory allocated for internal unit.
From-SVN: r112914
PR libgfortran/24685
* io/write.c (MIN_FIELD_WIDTH, STR, STR1): Define.
(output_float): Increase buffer sizes for IEEE quad and IBM extended
long double.
(write_real): Output REAL(16) as 1PG43.34E4 rather than 1PG40.31E4.
From-SVN: r112819
