As reported here
( https://gcc.gnu.org/pipermail/gcc-patches/2020-September/553070.html ),
when running test-case libgomp.c-c++-common/reduction-16.c for powerpc host
with nvptx accelerator, we run into:
...
unresolved symbol __sync_val_compare_and_swap_16
...
I can reproduce the problem on x86_64 with a trigger patch that:
- initializes ix86_isa_flags2 to TARGET_ISA2_CX16
- enables define_expand "atomic_load<mode>" in gcc/config/i386/sync.md
for TImode
The problem is that omp-expand.c generates atomic builtin calls based on
checks whether those are supported on the host, which forces the target to
support these, even though those checks fail for the accelerator target.
Fix this by:
- adding a __sync_val_compare_and_swap_16 in libgomp for nvptx,
which falls back onto libatomic's __atomic_compare_and_swap_16
- adding -foffload=-latomic in the test-case
Tested libgomp on x86_64-linux with nvptx accelerator.
Tested libgomp with trigger patch on x86_64-linux with nvptx accelerator.
libgomp/ChangeLog:
* config/nvptx/atomic.c: New file. Add
__sync_val_compare_and_swap_16.
* testsuite/libgomp.c-c++-common/reduction-16.c: Add -latomic for
target offload_target_nvptx.
The test case was written with assumptions about loop iteration ordering
that are not guaranteed by OpenACC and do not apply on all targets,
in particular AMD GCN. This patch removes those assumptions.
2020-09-08 Julian Brown <julian@codesourcery.com>
libgomp/
* testsuite/libgomp.oacc-c-c++-common/atomic_capture-2.c: Remove
iteration-ordering assumptions.
The gangs participating in a gang-partitioned loop are not all guaranteed
to complete before some given gang continues to execute beyond that loop.
This means that two existing test cases contain a race condition,
because a loop that may be gang-partitioned is followed immediately by
another loop. The fix is to place the loops in separate parallel regions.
2020-09-08 Julian Brown <julian@codesourcery.com>
libgomp/
* testsuite/libgomp.oacc-fortran/collapse-1.f90: Fix race condition.
* testsuite/libgomp.oacc-fortran/collapse-2.f90: Likewise.
This adds support for __sync_val_compare_and_swap and
__sync_bool_compare_and_swap for 1-byte and 2-byte long
values, which are not natively supported on nvptx.
Build and reg-tested on nvptx.
Build and reg-tested libgomp on x86_64 with nvptx accelerator.
2020-07-16 Kwok Cheung Yeung <kcy@codesourcery.com>
libgcc/
* config/nvptx/atomic.c: New.
* config/nvptx/t-nvptx (LIB2ADD): Add atomic.c.
gcc/testsuite/
* gcc.target/nvptx/ia64-sync-5.c: New.
libgomp/
* testsuite/libgomp.c-c++-common/reduction-16.c: New.
2020-08-13 Jakub Jelinek <jakub@redhat.com>
* gimplify.c (gimplify_omp_taskloop_expr): New function.
(gimplify_omp_for): Use it. For OMP_FOR_NON_RECTANGULAR
loops adjust in outer taskloop the var-outer decls.
* omp-expand.c (expand_omp_taskloop_for_inner): Handle non-rectangular
loops.
(expand_omp_for): Don't reject non-rectangular taskloop.
* omp-general.c (omp_extract_for_data): Don't assert that
non-rectangular loops have static schedule, instead treat loop->m1
or loop->m2 as if loop->n1 or loop->n2 is non-constant.
* testsuite/libgomp.c/loop-22.c (main): Add some further tests.
* testsuite/libgomp.c/loop-23.c (main): Likewise.
* testsuite/libgomp.c/loop-24.c: New test.
If the walk_body on the various sequences of reduction, lastprivate and/or linear
clauses needs to create a temporary variable, we should declare that variable
in that sequence rather than outside, where it would need to be privatized inside of
the construct.
2020-08-08 Jakub Jelinek <jakub@redhat.com>
PR fortran/93553
* tree-nested.c (convert_nonlocal_omp_clauses): For
OMP_CLAUSE_REDUCTION, OMP_CLAUSE_LASTPRIVATE and OMP_CLAUSE_LINEAR
save info->new_local_var_chain around walks of the clause gimple
sequences and declare_vars if needed into the sequence.
2020-08-08 Tobias Burnus <tobias@codesourcery.com>
PR fortran/93553
* testsuite/libgomp.fortran/pr93553.f90: New test.
The number of loops computation and logical iteration -> actual iterator values
computations can now be done separately even on composite constructs (though
for triangular loops it would still be more efficient to propagate a few values
through, will handle that incrementally).
simd and taskloop are still unhandled.
2020-08-05 Jakub Jelinek <jakub@redhat.com>
* omp-expand.c (expand_omp_for): Don't disallow combined non-rectangular
loops.
* testsuite/libgomp.c/loop-22.c: New test.
* testsuite/libgomp.c/loop-23.c: New test.
As the new testcase shows, we weren't actually performing reductions on
host teams construct. And fixing that revealed a flaw in the for-14.c testcase.
The problem is that the tests perform also initialization and checking around the
calls to the functions with the OpenMP constructs. In that testcase, all the
tests have been spawned from a teams construct but only the tested loops were
distribute, which means the initialization and checking has been performed
redundantly and racily in each team. Fixed by performing the initialization
and checking outside of host teams and only do the calls to functions with
the tested constructs inside of host teams.
2020-08-05 Jakub Jelinek <jakub@redhat.com>
PR middle-end/96459
* omp-low.c (lower_omp_taskreg): Call lower_reduction_clauses even in
for host teams.
* testsuite/libgomp.c/teams-3.c: New test.
* testsuite/libgomp.c-c++-common/for-2.h (OMPTEAMS): Define to nothing
if not defined yet.
(N(test)): Use it before all N(f*) calls.
* testsuite/libgomp.c-c++-common/for-14.c (DO_PRAGMA, OMPTEAMS): Define.
(main): Don't call all test_* functions from within
#pragma omp teams reduction(|:err), call them directly.
With the pr96628-part1.f90 source and -ftree-slp-vectorize, we run into an
ICE due to the fact that V2DI mode is not handled in nvptx_gen_shuffle.
Fix this by adding handling of V2DI as well as V2SI mode in
nvptx_gen_shuffle.
Build and reg-tested on x86_64 with nvptx accelerator.
gcc/ChangeLog:
PR target/96428
* config/nvptx/nvptx.c (nvptx_gen_shuffle): Handle V2SI/V2DI.
libgomp/ChangeLog:
PR target/96428
* testsuite/libgomp.oacc-fortran/pr96628-part1.f90: New test.
* testsuite/libgomp.oacc-fortran/pr96628-part2.f90: New test.
Standalone attach and detach clauses should not create present/release
mappings for Fortran array descriptors (e.g. used when we have a pointer
to an array), both because it is unnecessary and because those mappings
will be incorrectly subject to reference counting. Simply omitting the
mappings means we just use GOMP_MAP_TO_PSET and GOMP_MAP_{ATTACH,DETACH}
mappings for array descriptors.
That requires a tweak in gimplify.c, since we may now see GOMP_MAP_TO_PSET
without a preceding data-movement mapping.
2020-08-03 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
gcc/fortran/
* trans-openmp.c (gfc_trans_omp_clauses): Don't create present/release
mappings for array descriptors.
gcc/
* gimplify.c (gimplify_omp_target_update): Allow GOMP_MAP_TO_PSET
without a preceding data-movement mapping.
gcc/testsuite/
* gfortran.dg/goacc/attach-descriptor.f90: Update pattern output. Add
scanning of gimplify dump.
libgomp/
* testsuite/libgomp.oacc-fortran/attach-descriptor-1.f90: Don't run for
shared-memory devices. Extend with further checking.
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
This patch removes the generation of HSAIL from the compiler, the HSA
offloading plugin from libgomp and the associated testsuite tests and
infrastructure bits from the respective testsuites.
Apart from removal of the obvious files, I removed bits that I found
by searching for HSA related terms and by re-tracing my steps and
looking at the patches that introduced HSA in the first place. I did
not remove everything these patches brought in, for example:
- the mechanism to pass offload-target specific info from the application to
the offloading plugin - but the same mechanism is also used to
communicate number of teams and the thread limit to all offload targets.
- run_func hook in gomp_device_descr stays too, although now it is
not used. If some future offload target would like the ability to
refuse to offload some functions, it can use it. It is easy to
remove as a follow-up if it is considered clutter, though.
- configure options --with-hsa-runtime=PATH, -with-hsa-runtime-include=PATH
and --with-hsa-runtime-lib=PATH rmeain because GCN uses them too.
- Surprisingly, GOMP_TARGET_ARG_HSA_KERNEL_ATTRIBUTES (a constant
from gomp-constants.h) appears in the source of the amdgcn libgomp
plugin, although I tend to think that code path is not ever used
and this patch certainly removes it from the compiler.
Nevertheless, it seems it has potential value beyond HSAIL and so
I've kept it, it can of course always be easily removed in the
future of GCN folk abandon it too.
- I assume constants OFFLOAD_TARGET_TYPE_HSA and GOMP_DEVICE_HSA
need to stay indefinitely too just so that no future offload
target picks that number.
- I have kept dg-require-effective-target
offload_device_nonshared_as requirement of thests which have it.
It is quite probable I missed some small HSA artifacts but those
should be easy to remove later as we find them.
include/ChangeLog:
2020-07-24 Martin Jambor <mjambor@suse.cz>
* gomp-constants.h (GOMP_VERSION_HSA): Remove.
gcc/ChangeLog:
2020-07-24 Martin Jambor <mjambor@suse.cz>
* hsa-brig-format.h: Moved to brig/brigfrontend.
* hsa-brig.c: Removed.
* hsa-builtins.def: Likewise.
* hsa-common.c: Likewise.
* hsa-common.h: Likewise.
* hsa-dump.c: Likewise.
* hsa-gen.c: Likewise.
* hsa-regalloc.c: Likewise.
* ipa-hsa.c: Likewise.
* omp-grid.c: Likewise.
* omp-grid.h: Likewise.
* Makefile.in (BUILTINS_DEF): Remove hsa-builtins.def.
(OBJS): Remove hsa-common.o, hsa-gen.o, hsa-regalloc.o, hsa-brig.o,
hsa-dump.o, ipa-hsa.c and omp-grid.o.
(GTFILES): Removed hsa-common.c and omp-expand.c.
* builtins.def: Remove processing of hsa-builtins.def.
(DEF_HSA_BUILTIN): Remove.
* common.opt (flag_disable_hsa): Remove.
(-Whsa): Ignore.
* config.in (ENABLE_HSA): Removed.
* configure.ac: Removed handling configuration for hsa offloading.
(ENABLE_HSA): Removed.
* configure: Regenerated.
* doc/install.texi (--enable-offload-targets): Remove hsa from the
example.
(--with-hsa-runtime): Reword to reference any HSA run-time, not
specifically HSA offloading.
* doc/invoke.texi (Option Summary): Remove -Whsa.
(Warning Options): Likewise.
(Optimize Options): Remove hsa-gen-debug-stores.
* doc/passes.texi (Regular IPA passes): Remove section on IPA HSA
pass.
* gimple-low.c (lower_stmt): Remove GIMPLE_OMP_GRID_BODY case.
* gimple-pretty-print.c (dump_gimple_omp_for): Likewise.
(dump_gimple_omp_block): Likewise.
(pp_gimple_stmt_1): Likewise.
* gimple-walk.c (walk_gimple_stmt): Likewise.
* gimple.c (gimple_build_omp_grid_body): Removed function.
(gimple_copy): Remove GIMPLE_OMP_GRID_BODY case.
* gimple.def (GIMPLE_OMP_GRID_BODY): Removed.
* gimple.h (gf_mask): Removed GF_OMP_PARALLEL_GRID_PHONY,
OMP_FOR_KIND_GRID_LOOP, GF_OMP_FOR_GRID_PHONY,
GF_OMP_FOR_GRID_INTRA_GROUP, GF_OMP_FOR_GRID_GROUP_ITER and
GF_OMP_TEAMS_GRID_PHONY. Renumbered GF_OMP_FOR_KIND_SIMD and
GF_OMP_TEAMS_HOST.
(gimple_build_omp_grid_body): Removed declaration.
(gimple_has_substatements): Remove GIMPLE_OMP_GRID_BODY case.
(gimple_omp_for_grid_phony): Removed.
(gimple_omp_for_set_grid_phony): Likewise.
(gimple_omp_for_grid_intra_group): Likewise.
(gimple_omp_for_grid_intra_group): Likewise.
(gimple_omp_for_grid_group_iter): Likewise.
(gimple_omp_for_set_grid_group_iter): Likewise.
(gimple_omp_parallel_grid_phony): Likewise.
(gimple_omp_parallel_set_grid_phony): Likewise.
(gimple_omp_teams_grid_phony): Likewise.
(gimple_omp_teams_set_grid_phony): Likewise.
(CASE_GIMPLE_OMP): Remove GIMPLE_OMP_GRID_BODY case.
* lto-section-in.c (lto_section_name): Removed hsa.
* lto-streamer.h (lto_section_type): Removed LTO_section_ipa_hsa.
* lto-wrapper.c (compile_images_for_offload_targets): Remove special
handling of hsa.
* omp-expand.c: Do not include hsa-common.h and gt-omp-expand.h.
(parallel_needs_hsa_kernel_p): Removed.
(grid_launch_attributes_trees): Likewise.
(grid_launch_attributes_trees): Likewise.
(grid_create_kernel_launch_attr_types): Likewise.
(grid_insert_store_range_dim): Likewise.
(grid_get_kernel_launch_attributes): Likewise.
(get_target_arguments): Remove code passing HSA grid sizes.
(grid_expand_omp_for_loop): Remove.
(grid_arg_decl_map): Likewise.
(grid_remap_kernel_arg_accesses): Likewise.
(grid_expand_target_grid_body): Likewise.
(expand_omp): Remove call to grid_expand_target_grid_body.
(omp_make_gimple_edges): Remove GIMPLE_OMP_GRID_BODY case.
* omp-general.c: Do not include hsa-common.h.
(omp_maybe_offloaded): Do not check for HSA offloading.
(omp_context_selector_matches): Likewise.
* omp-low.c: Do not include hsa-common.h and omp-grid.h.
(build_outer_var_ref): Remove handling of GIMPLE_OMP_GRID_BODY.
(scan_sharing_clauses): Remove handling of OMP_CLAUSE__GRIDDIM_.
(scan_omp_parallel): Remove handling of the phoney variant.
(check_omp_nesting_restrictions): Remove handling of
GIMPLE_OMP_GRID_BODY and GF_OMP_FOR_KIND_GRID_LOOP.
(scan_omp_1_stmt): Remove handling of GIMPLE_OMP_GRID_BODY.
(lower_omp_for_lastprivate): Remove handling of gridified loops.
(lower_omp_for): Remove phony loop handling.
(lower_omp_taskreg): Remove phony construct handling.
(lower_omp_teams): Likewise.
(lower_omp_grid_body): Removed.
(lower_omp_1): Remove GIMPLE_OMP_GRID_BODY case.
(execute_lower_omp): Do not call omp_grid_gridify_all_targets.
* opts.c (common_handle_option): Do not handle hsa when processing
OPT_foffload_.
* params.opt (hsa-gen-debug-stores): Remove.
* passes.def: Remove pass_ipa_hsa and pass_gen_hsail.
* timevar.def: Remove TV_IPA_HSA.
* toplev.c: Do not include hsa-common.h.
(compile_file): Do not call hsa_output_brig.
* tree-core.h (enum omp_clause_code): Remove OMP_CLAUSE__GRIDDIM_.
(tree_omp_clause): Remove union field dimension.
* tree-nested.c (convert_nonlocal_omp_clauses): Remove the
OMP_CLAUSE__GRIDDIM_ case.
(convert_local_omp_clauses): Likewise.
* tree-pass.h (make_pass_gen_hsail): Remove declaration.
(make_pass_ipa_hsa): Likewise.
* tree-pretty-print.c (dump_omp_clause): Remove GIMPLE_OMP_GRID_BODY
case.
* tree.c (omp_clause_num_ops): Remove the element corresponding to
OMP_CLAUSE__GRIDDIM_.
(omp_clause_code_name): Likewise.
(walk_tree_1): Remove GIMPLE_OMP_GRID_BODY case.
* tree.h (OMP_CLAUSE__GRIDDIM__DIMENSION): Remove.
(OMP_CLAUSE__GRIDDIM__SIZE): Likewise.
(OMP_CLAUSE__GRIDDIM__GROUP): Likewise.
gcc/fortran/ChangeLog:
2020-07-24 Martin Jambor <mjambor@suse.cz>
* f95-lang.c (gfc_init_builtin_functions): Remove processing of
hsa-builtins.def.
gcc/brig/ChangeLog:
2020-07-24 Martin Jambor <mjambor@suse.cz>
* brigfrontend/brig-util.h (hsa_type_packed_p): Declared.
* brigfrontend/brig-util.cc (hsa_type_packed_p): Moved here from
removed gcc/hsa-common.c.
libgomp/ChangeLog:
2020-07-24 Martin Jambor <mjambor@suse.cz>
* plugin/Makefrag.am: Remove configuration of HSA plugin.
* aclocal.m4: Regenerated.
* Makefile.in: Regenerated.
* config.h.in: Regenerated.
* configure: Regenerated.
* plugin/configfrag.ac: Likewise.
* plugin/hsa_ext_finalize.h: Removed.
* plugin/plugin-hsa.c: Likewise.
* testsuite/Makefile.in: Regenerated.
* testsuite/lib/libgomp.exp
(offload_target_to_openacc_device_type): Remove hsa case.
(check_effective_target_hsa_offloading_selected_nocache): Removed
(check_effective_target_hsa_offloading_selected): Likewise.
(libgomp_init): Do not add -Wno-hsa to additional_flags.
* testsuite/libgomp.hsa.c/alloca-1.c: Removed test.
* testsuite/libgomp.hsa.c/bitfield-1.c: Likewise.
* testsuite/libgomp.hsa.c/bits-insns.c: Likewise.
* testsuite/libgomp.hsa.c/builtins-1.c: Likewise.
* testsuite/libgomp.hsa.c/c.exp: Likewise.
* testsuite/libgomp.hsa.c/complex-1.c: Likewise.
* testsuite/libgomp.hsa.c/complex-align-2.c: Likewise.
* testsuite/libgomp.hsa.c/formal-actual-args-1.c: Likewise.
* testsuite/libgomp.hsa.c/function-call-1.c: Likewise.
* testsuite/libgomp.hsa.c/get-level-1.c: Likewise.
* testsuite/libgomp.hsa.c/gridify-1.c: Likewise.
* testsuite/libgomp.hsa.c/gridify-2.c: Likewise.
* testsuite/libgomp.hsa.c/gridify-3.c: Likewise.
* testsuite/libgomp.hsa.c/gridify-4.c: Likewise.
* testsuite/libgomp.hsa.c/memory-operations-1.c: Likewise.
* testsuite/libgomp.hsa.c/pr69568.c: Likewise.
* testsuite/libgomp.hsa.c/pr82416.c: Likewise.
* testsuite/libgomp.hsa.c/rotate-1.c: Likewise.
* testsuite/libgomp.hsa.c/staticvar.c: Likewise.
* testsuite/libgomp.hsa.c/switch-1.c: Likewise.
* testsuite/libgomp.hsa.c/switch-branch-1.c: Likewise.
* testsuite/libgomp.hsa.c/switch-sbr-2.c: Likewise.
* testsuite/libgomp.hsa.c/tiling-1.c: Likewise.
* testsuite/libgomp.hsa.c/tiling-2.c: Likewise.
gcc/testsuite/ChangeLog:
2020-07-24 Martin Jambor <mjambor@suse.cz>
* lib/target-supports.exp (check_effective_target_offload_hsa):
Removed.
* c-c++-common/gomp/gridify-1.c: Removed test.
* c-c++-common/gomp/gridify-2.c: Likewise.
* c-c++-common/gomp/gridify-3.c: Likewise.
* c-c++-common/gomp/hsa-indirect-call-1.c: Likewise.
* gfortran.dg/gomp/gridify-1.f90: Likewise.
* gcc.dg/gomp/gomp.exp: Do not pass -Wno-hsa to tests.
* g++.dg/gomp/gomp.exp: Likewise.
* gfortran.dg/gomp/gomp.exp: Likewise.
Attach and detach operations are not supposed to affect structural or
dynamic reference counts for OpenACC. Previously they did so, which led to
subtle problems in some circumstances. We can avoid reference-counting
attach/detach operations by extending and slightly repurposing the
do_detach field in target_var_desc. It is now called is_attach to better
reflect its new role.
2020-07-27 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
libgomp/
* libgomp.h (struct target_var_desc): Rename do_detach field to
is_attach.
* oacc-mem.c (goacc_exit_datum_1): Add assert. Don't set finalize for
GOMP_MAP_FORCE_DETACH. Update checking to use is_attach field.
(goacc_enter_data_internal): Don't affect reference counts
for attach mappings.
(goacc_exit_data_internal): Don't affect reference counts for detach
mappings.
* target.c (gomp_map_vars_existing): Don't affect reference counts for
attach mappings.
(gomp_map_vars_internal): Set renamed is_attach flag unconditionally to
mark attach mappings.
(gomp_unmap_vars_internal): Use is_attach flag to prevent affecting
reference count for attach mappings.
* testsuite/libgomp.oacc-c-c++-common/mdc-refcount-1.c: New test.
* testsuite/libgomp.oacc-c-c++-common/mdc-refcount-2.c: New test.
* testsuite/libgomp.oacc-c-c++-common/mdc-refcount-2.c: New test.
* testsuite/libgomp.oacc-fortran/deep-copy-6-no_finalize.F90: Mark
test as shouldfail.
* testsuite/libgomp.oacc-fortran/deep-copy-6.f90: Adjust to fail
gracefully in no-finalize mode.
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
..., so that we don't leak this into '*.exp' files running later.
This is relevant after commit efc16503ca "handle
dumpbase in offloading, adjust testsuite" -- I was confused why in a
(simplified) testing sequence as follows:
default 'libgomp.c/c.exp'
default 'libgomp.oacc-c/c.exp'
'-m32' 'libgomp.c/c.exp'
'-m32' 'libgomp.oacc-c/c.exp'
..., the "'-m32' 'libgomp.c/c.exp'" variant would not execute any offloading
dump scanning. The reason is that the "default 'libgomp.oacc-c/c.exp'" variant
ends with 'offload_target=disable' set, so that's what the "'-m32'
'libgomp.c/c.exp'" variant would then see, in particular
'gcc/testsuite/lib/scanoffload.exp:scoff'.
libgomp/
* testsuite/libgomp.oacc-c++/c++.exp: Unset 'offload_target' after
use.
* testsuite/libgomp.oacc-c/c.exp: Likewise.
* testsuite/libgomp.oacc-fortran/fortran.exp: Likewise.
The call to gomp_detach_pointer in gomp_unmap_vars_internal does not
need to force finalization, and doing so may mask mismatched pointer
attachments/detachments. This patch removes the forcing.
2020-07-16 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
libgomp/
* target.c (gomp_unmap_vars_internal): Remove unnecessary forcing of
finalization for detach operation.
* testsuite/libgomp.oacc-c-c++-common/structured-detach-underflow.c:
New test.
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
libgomp/ChangeLog:
* testsuite/libgomp.c-c++-common/critical-hint-1.c: New; moved from
gcc/testsuite/c-c++-common/gomp/.
* testsuite/libgomp.c-c++-common/critical-hint-2.c: Likewise.
* testsuite/libgomp.fortran/critical-hint-1.f90: New; moved
from gcc/testsuite/gfortran.dg/gomp/.
* testsuite/libgomp.fortran/critical-hint-2.f90: Likewise.
gcc/testsuite/ChangeLog:
* c-c++-common/gomp/critical-hint-1.c: Moved to libgomp/.
* c-c++-common/gomp/critical-hint-2.c: Moved to libgomp/.
* gfortran.dg/gomp/critical-hint-1.f90: Moved to libgomp/.
* gfortran.dg/gomp/critical-hint-2.f90: Moved to libgomp/.
Define ASM_OUTPUT_ALIGNED_DECL_LOCAL for large local common symbol.
gcc/
PR target/95620
* config/i386/x86-64.h (ASM_OUTPUT_ALIGNED_DECL_LOCAL): New.
libgomp/
PR target/95620
* testsuite/libgomp.c/pr95620.c: New test.
This patch makes it so that an "attach" operation for a Fortran pointer
with an array descriptor copies that array descriptor to the target,
and similarly that detach operations release the array descriptor.
2020-07-16 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
gcc/fortran/
* trans-openmp.c (gfc_trans_omp_clauses): Rework OpenACC
attach/detach handling for arrays with descriptors.
gcc/testsuite/
* gfortran.dg/goacc/attach-descriptor.f90: New test.
libgomp/
* testsuite/libgomp.oacc-fortran/attach-descriptor-1.f90: New test.
* testsuite/libgomp.oacc-fortran/attach-descriptor-2.f90: New test.
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
libgomp/ChangeLog:
* testsuite/libgomp.fortran/alloc-1.F90: Use c_size_t to
avoid conversion on 32bit systems from 32bit to 64bit due
to -fdefault-integer-8.
As the Fortran PR 95837 has been fixed, the test could be be added.
libgomp/ChangeLog:
* testsuite/libgomp.fortran/struct-elem-map-1.f90: Remove unused
variables; add character(kind=4) tests; update TODO comment.
The version of nvprof in CUDA 9.0 causes a hang when used to profile an
OpenACC program. This is because it calls acc_get_device_type from
a callback called during device initialization, which then attempts
to acquire acc_device_lock while it is already taken, resulting in
deadlock. This works around the issue by returning acc_device_none
from acc_get_device_type without attempting to acquire the lock when
initialization has not completed yet.
2020-07-14 Tom de Vries <tom@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
Kwok Cheung Yeung <kcy@codesourcery.com>
libgomp/
* oacc-init.c (acc_init_state_lock, acc_init_state, acc_init_thread):
New variable.
(acc_init_1): Set acc_init_thread to pthread_self (). Set
acc_init_state to initializing at the start, and to initialized at the
end.
(self_initializing_p): New function.
(acc_get_device_type): Return acc_device_none if called by thread that
is currently executing acc_init_1.
* libgomp.texi (acc_get_device_type): Update documentation.
(Implementation Status and Implementation-Defined Behavior): Likewise.
* testsuite/libgomp.oacc-c-c++-common/acc_prof-init-2.c: New.
gcc/fortran/ChangeLog:
PR fortran/67311
* trans-openmp.c (gfc_has_alloc_comps): Return false also for
pointers to arrays.
libgomp/ChangeLog:
PR fortran/67311
* testsuite/libgomp.fortran/target-map-1.f90: New test.
In loops like:
#pragma omp parallel for collapse(2)
for (i = -4; i < 8; i++)
for (j = 3 * i; j > 2 * i; j--)
for some outer loop iterations there are no inner loop iterations at all,
the condition is false. In order to use Summæ Potestate to count number
of iterations or to transform the logical iteration number to actual
iterator values using quadratic non-equation root discovery the outer
iterator range needs to be adjusted, such that the inner loop has at least
one iteration for each of the outer loop iterator value in the reduced
range. Sometimes this adjustment is done at the start of the range,
at other times at the end.
This patch implements it during the compile time number of loop computation
(if all expressions are compile time constants).
2020-07-14 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data): Add adjn1 member.
* omp-general.c (omp_extract_for_data): For non-rect loop, punt on
count computing if n1, n2 or step are not INTEGER_CST earlier.
Narrow the outer iterator range if needed so that non-rect loop
has at least one iteration for each outer range iteration. Compute
adjn1.
* omp-expand.c (expand_omp_for_init_vars): Use adjn1 if non-NULL
instead of the outer loop's n1.
* testsuite/libgomp.c/loop-21.c: New test.
OpenACC 2.6 specifies that the array descriptor (when present) must be
copied to the target before attaching pointers in Fortran. This patch
reverses the stripping of GOMP_MAP_TO_PSET and GOMP_MAP_POINTER that
was introduced by the "OpenACC reference count overhaul" patch.
2020-07-10 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
gcc/
* gimplify.c (gimplify_scan_omp_clauses): Do not strip
GOMP_MAP_TO_PSET/GOMP_MAP_POINTER for OpenACC enter/exit data
directives (see also PR92929).
gcc/testsuite/
* gfortran.dg/goacc/finalize-1.f: Update expected dump output.
libgomp/
* testsuite/libgomp.oacc-fortran/dynamic-pointer-1.f90: New test.
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
This patch adjusts how dynamic reference counts work so that they match
the semantics of the source program more closely, instead of representing
"excess" reference counts beyond those that represent pointers in the
internal libgomp splay-tree data structure. This allows some corner
cases to be handled more gracefully.
2020-07-10 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
libgomp/
* libgomp.h (struct splay_tree_key_s): Change virtual_refcount to
dynamic_refcount.
(struct gomp_device_descr): Remove GOMP_MAP_VARS_OPENACC_ENTER_DATA.
* oacc-mem.c (acc_map_data): Substitute virtual_refcount for
dynamic_refcount.
(acc_unmap_data): Update comment.
(goacc_map_var_existing, goacc_enter_datum): Adjust for
dynamic_refcount semantics.
(goacc_exit_datum_1, goacc_exit_datum): Re-add some error checking.
Adjust for dynamic_refcount semantics.
(goacc_enter_data_internal): Implement "present" case of dynamic
memory-map handling here. Update "non-present" case for
dynamic_refcount semantics.
(goacc_exit_data_internal): Use goacc_exit_datum_1.
* target.c (gomp_map_vars_internal): Remove
GOMP_MAP_VARS_OPENACC_ENTER_DATA handling. Update for dynamic_refcount
handling.
(gomp_unmap_vars_internal): Remove virtual_refcount handling.
(gomp_load_image_to_device): Substitute dynamic_refcount for
virtual_refcount.
* testsuite/libgomp.oacc-c-c++-common/pr92843-1.c: Remove XFAILs.
* testsuite/libgomp.oacc-c-c++-common/refcounting-1.c: New test.
* testsuite/libgomp.oacc-c-c++-common/refcounting-2.c: New test.
* testsuite/libgomp.oacc-c-c++-common/struct-3-1-1.c: New test.
* testsuite/libgomp.oacc-fortran/deep-copy-6.f90: Remove XFAILs and
trace output.
* testsuite/libgomp.oacc-fortran/deep-copy-6-no_finalize.F90: Remove
trace output.
* testsuite/libgomp.oacc-fortran/dynamic-incr-structural-1.f90: New
test.
* testsuite/libgomp.oacc-c-c++-common/structured-dynamic-lifetimes-4.c:
Remove stale comment.
* testsuite/libgomp.oacc-fortran/mdc-refcount-1-1-1.f90: Remove XFAILs.
* testsuite/libgomp.oacc-fortran/mdc-refcount-1-1-2.F90: Likewise.
* testsuite/libgomp.oacc-fortran/mdc-refcount-1-2-1.f90: Likewise.
* testsuite/libgomp.oacc-fortran/mdc-refcount-1-2-2.f90: Likewise.
* testsuite/libgomp.oacc-fortran/mdc-refcount-1-3-1.f90: Likewise.
* testsuite/libgomp.oacc-fortran/mdc-refcount-1-4-1.f90: Adjust XFAIL.
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
This is a fix for the pointer (or array) size inadvertently being used
for the bias with attach and detach mapping kinds, for both C and C++.
2020-07-09 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
gcc/c/
PR middle-end/95270
* c-typeck.c (c_finish_omp_clauses): Set OMP_CLAUSE_SIZE (bias) to zero
for standalone attach/detach clauses.
gcc/cp/
PR middle-end/95270
* semantics.c (finish_omp_clauses): Likewise.
include/
PR middle-end/95270
* gomp-constants.h (gomp_map_kind): Expand comment for attach/detach
mapping kinds.
gcc/testsuite/
PR middle-end/95270
* c-c++-common/goacc/mdc-1.c: Update expected dump output for zero
bias.
libgomp/
PR middle-end/95270
* testsuite/libgomp.oacc-c-c++-common/pr95270-1.c: New test.
* testsuite/libgomp.oacc-c-c++-common/pr95270-2.c: New test.
This patch implements the optimized logical to actual iterators
computation for triangular loops.
I have a rough implementation using integers, but this one uses floating
point. There is a small problem that -fopenmp programs aren't linked with
-lm, so it does it only if the hw has sqrt optab (and uses ifn rather than
__builtin_sqrt because it obviously doesn't need errno handling etc.).
Do you think it is ok this way, or should I use the integral computation
using inlined isqrt (we have inequation of the form
start >= x * t10 + t11 * (((x - 1) * x) / 2)
where t10 and t11 are signed long long values and start unsigned long long,
and the division by 2 actually is a problem for accuracy in some cases, so
if we do it in integral, we need to do actually
long long t12 = 2 * t10 - t11;
unsigned long long t13 = t12 * t12 + start * 8 * t11;
unsigned long long isqrt_ = isqrtull (t13);
long long x = (((long long) isqrt_ - t12) / t11) >> 1;
with careful overflow checking on all the computations before isqrtull
(and on overflows use the fallback implementation).
2020-07-09 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data): Add min_inner_iterations
and factor members.
* omp-general.c (omp_extract_for_data): Initialize them and remember
them in OMP_CLAUSE_COLLAPSE_COUNT if needed and restore from there.
* omp-expand.c (expand_omp_for_init_counts): Fix up computation of
counts[fd->last_nonrect] if fd->loop.n2 is INTEGER_CST.
(expand_omp_for_init_vars): For
fd->first_nonrect + 1 == fd->last_nonrect loops with for now
INTEGER_CST fd->loop.n2 find quadratic equation roots instead of
using fallback method when possible.
* testsuite/libgomp.c/loop-19.c: New test.
* testsuite/libgomp.c/loop-20.c: New test.
As done for 'GOMP_MAP_FROM', also for 'GOMP_MAP_FORCE_FROM' we should only
'gomp_copy_dev2host' if 'n->refcount == 0'.
This had gotten altered in commit 378da98fcc
(r279621) "OpenACC reference count overhaul".
libgomp/
* oacc-mem.c (goacc_exit_data_internal): Revert always-copyfrom
behavior for 'GOMP_MAP_FORCE_FROM'.
* testsuite/libgomp.oacc-c-c++-common/pr92843-1.c: Adjust XFAIL.
These test cases use directives similar to:
/* { dg-additional-options "-save-temps" } */
/* { dg-final { scan-assembler-times "bar.sync" 2 } } */
This expects to scan the PTX offloading compilation assembler code (not host
code!), expecting that nvptx offloading code assembly is produced after the
host code, and thus overwrites the latter file. (Yes, that's certainly
ugly/fragile...)
..., and this broke with recent commit 1dedc12d18
"revamp dump and aux output names" plus fix-up commit commit
efc16503ca "handle dumpbase in offloading, adjust
testsuite" (short summary: file names changed), so let's finally make that
robust.
libgomp/
* testsuite/libgomp.oacc-c-c++-common/pr85381-2.c: Replace fragile
'scan-assembler' with 'scan-offload-rtl'.
* testsuite/libgomp.oacc-c-c++-common/pr85381-3.c: Likewise.
* testsuite/libgomp.oacc-c-c++-common/pr85381-4.c: Likewise.
* testsuite/libgomp.oacc-c-c++-common/pr85381-5.c: Likewise.
* testsuite/libgomp.oacc-c-c++-common/pr85381.c: Likewise.
This implements the fallback mentioned in
https://gcc.gnu.org/pipermail/gcc/2020-June/232874.html
Special cases for triangular loops etc. to follow later, also composite
constructs not supported yet (need to check the passing of temporaries around)
and lastprivate might not give the same answers as serial loop if the last
innermost body iteration isn't the last one for some of the outer loops
(that will need to be solved separately together with rectangular loops that have no
innermost body iterations, but some of the outer loops actually iterate).
Also, simd needs work.
2020-06-27 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data_loop): Add non_rect_referenced
member, move outer member.
(struct omp_for_data): Add first_nonrect and last_nonrect members.
* omp-general.c (omp_extract_for_data): Initialize first_nonrect,
last_nonrect and non_rect_referenced members.
* omp-expand.c (expand_omp_for_init_counts): Handle non-rectangular
loops.
(expand_omp_for_init_vars): Add nonrect_bounds parameter. Handle
non-rectangular loops.
(extract_omp_for_update_vars): Likewise.
(expand_omp_for_generic, expand_omp_for_static_nochunk,
expand_omp_for_static_chunk, expand_omp_simd,
expand_omp_taskloop_for_outer, expand_omp_taskloop_for_inner): Adjust
expand_omp_for_init_vars and extract_omp_for_update_vars callers.
(expand_omp_for): Don't sorry on non-composite worksharing-loop or
distribute.
* testsuite/libgomp.c/loop-17.c: New test.
* testsuite/libgomp.c/loop-18.c: New test.
Since GCC 9, C++17 support is no longer experimental. It was too late
to change the default C++ dialect to C++17 in GCC 10, but I think now
it's time to pull the trigger (C++14 was made the default in GCC 6.1).
We're still missing two C++17 library features, but that shouldn't stop
us. See
<https://gcc.gnu.org/onlinedocs/libstdc++/manual/status.html#status.iso.2017>
and
<https://gcc.gnu.org/projects/cxx-status.html#cxx17>
for the C++17 status.
I won't list all C++17 features here, but just a few heads-up:
- trigraphs were removed (hardly anyone cares, unless your keyboard is
missing the # key),
- operator++(bool) was removed (so some tests now run in C++14 and down
only),
- the keyword register was removed (some legacy code might trip on
this),
- noexcept specification is now part of the type system and C++17 does
not allow dynamic exception specifications anymore (the empty throw
specification is still available, but it is deprecated),
- the evaluation order rules are different in C++17,
- static constexpr data members are now implicitly inline (which makes
them definitions),
- C++17 requires guaranteed copy elision, meaning that a copy/move
constructor call might be elided completely. That means that if
something relied on a constructor being instantiated via e.g. copying
a function parameter, it might now fail.
I'll post an update for cxx-status.html and add a new caveat to changes.html
once this is in.
gcc/ChangeLog:
* doc/invoke.texi (C Dialect Options): Adjust -std default for C++.
* doc/standards.texi (C Language): Correct the default dialect.
(C++ Language): Update the default for C++ to gnu++17.
gcc/c-family/ChangeLog:
* c-opts.c (c_common_init_options): Default to gnu++17.
gcc/testsuite/ChangeLog:
* c-c++-common/torture/vector-subscript-3.c: In C++17, define away
the keyword register.
* g++.dg/cpp1z/attributes-enum-1a.C: Only run pre-C++17.
* g++.dg/cpp1z/fold7a.C: Likewise.
* g++.dg/cpp1z/nontype3a.C: Likewise.
* g++.dg/cpp1z/utf8-2a.C: Likewise.
* g++.dg/parse/error11.C: Update expected diagnostics for C++17.
* g++.dg/torture/pr34850.C: Add -Wno-attribute-warning.
* g++.dg/torture/pr49394.C: In C++17, use noexcept(false).
* g++.dg/torture/pr82154.C: Use -std=c++14.
* lib/target-supports.exp: Set to C++17.
* obj-c++.dg/try-catch-9.mm: Use -Wno-register.
libgomp/ChangeLog:
* testsuite/libgomp.c++/atomic-3.C: Use -std=gnu++14.
Pass dumpbase on to mkoffloads and their offload-target compiler runs,
using different suffixes for different offloading targets.
Obey -save-temps in naming temporary files while at that.
Adjust the testsuite offload dump scanning machinery to look for dump
files named under the new conventions, iterating internally over all
configured offload targets, or recognizing libgomp's testsuite's own
iteration.
for gcc/ChangeLog
* collect-utils.h (dumppfx): New.
* collect-utils.c (dumppfx): Likewise.
* lto-wrapper.c (run_gcc): Set global dumppfx.
(compile_offload_image): Pass a -dumpbase on to mkoffload.
* config/nvptx/mkoffload.c (ptx_dumpbase): New.
(main): Handle incoming -dumpbase. Set ptx_dumpbase. Obey
save_temps.
(compile_native): Pass -dumpbase et al to compiler.
* config/gcn/mkoffload.c (gcn_dumpbase): New.
(main): Handle incoming -dumpbase. Set gcn_dumpbase. Obey
save_temps. Pass -dumpbase et al to offload target compiler.
(compile_native): Pass -dumpbase et al to compiler.
for gcc/testsuite/ChangeLog
* lib/scanoffload.exp: New.
* lib/scanoffloadrtl.exp: Load it. Replace ".o" with ""
globally, and use scanoffload's scoff wrapper to fill it in.
* lib/scanoffloadtree.exp: Likewise.
for libgomp/ChangeLog
* testsuite/lib/libgomp.exp: Load gcc lib scanoffload.exp.
* testsuite/lib/libgomp-dg.exp: Drop now-obsolete -save-temps.
Fix-up for r279858/commit f760c0c77f "Fortran]
OpenMP/OpenACC – fix more issues with OPTIONAL".
With offloading enabled, we then saw:
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O0 (test for excess errors)
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O0 execution test
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O1 (test for excess errors)
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O1 execution test
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -O2 (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -O2 compilation failed to produce executable
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -fomit-frame-pointer -funroll-loops -fpeel-loops -ftracer -finline-functions (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -fomit-frame-pointer -funroll-loops -fpeel-loops -ftracer -finline-functions compilation failed to produce executable
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -g (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -g compilation failed to produce executable
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -Os (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -Os compilation failed to produce executable
... due to:
/tmp/cciVc43I.o:(.gnu.offload_vars+0x10): undefined reference to `A.12.4064'
[...]
..., but after the recent PR94848, PR95551 changes, that problem is now gone.
libgomp/
PR lto/94848
* testsuite/libgomp.fortran/use_device_ptr-optional-3.f90: Add
'dg-do run'.
gcc/fortran/ChangeLog
* parse.c (decode_oacc_directive): Permit 'acc routine' also
inside pure procedures.
* openmp.c (gfc_match_oacc_routine): Inside pure procedures
do not permit gang, worker or vector clauses.
libgomp/ChangeLog:
* testsuite/libgomp.oacc-fortran/routine-10.f90: New test.
gcc/testsuite/ChangeLog:
* gfortran.dg/goacc/pure-elemental-procedures-2.f90: New test.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
libgomp/
* testsuite/libgomp.oacc-c-c++-common/struct-copyout-1.c: New test.
* testsuite/libgomp.oacc-c-c++-common/struct-copyout-2.c: New test.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
Currently, we don't at all evaluate 'copyfrom' for 'GOMP_MAP_STRUCT' entries.
Fix this by copying/adapting the corresponding non-'GOMP_MAP_STRUCT' code.
libgomp/
* oacc-mem.c (goacc_exit_data_internal) <GOMP_MAP_STRUCT>:
Evaluate 'copyfrom' individually for each entry.
* testsuite/libgomp.oacc-c-c++-common/struct-1.c: Update.
Currently, we don't at all evaluate 'finalize' for 'GOMP_MAP_STRUCT' entries.
Fix this by copying/adapting the corresponding non-'GOMP_MAP_STRUCT' code.
libgomp/
* oacc-mem.c (goacc_exit_data_internal) <GOMP_MAP_STRUCT>:
Evaluate 'finalize' individually for each entry.
* testsuite/libgomp.oacc-c-c++-common/struct-1.c: New file.
* testsuite/libgomp.oacc-c-c++-common/struct-refcount-1.c: Remove
file.
If, for example, GCC is configured such that 'libgomp-plugin-nvptx.so.1'
dynamically links against 'libcuda.so.1', but testing is run on a system where
there is no 'libcuda.so.1', this produces output such as:
PASS: libgomp.oacc-fortran/error_stop-1.f -DACC_DEVICE_TYPE_host=1 -DACC_MEM_SHARED=1 -foffload=disable -O0 (test for excess errors)
PASS: libgomp.oacc-fortran/error_stop-1.f -DACC_DEVICE_TYPE_host=1 -DACC_MEM_SHARED=1 -foffload=disable -O0 execution test
FAIL: libgomp.oacc-fortran/error_stop-1.f -DACC_DEVICE_TYPE_host=1 -DACC_MEM_SHARED=1 -foffload=disable -O0 output pattern test, is CheCKpOInT
libgomp: while loading libgomp-plugin-nvptx.so.1: libcuda.so.1: cannot open shared object file: No such file or directory
ERROR STOP
Error termination. Backtrace: [...]
, should match CheCKpOInT(
|
|^M)+ERROR STOP (
|
|^M)+Error termination.*
..., where after 'CheCKpOInT' we got 'libgomp: while loading [...]' injected
before the expected 'ERROR STOP'.
libgomp/
* testsuite/libgomp.oacc-fortran/error_stop-1.f: Initialize before
the checkpoint.
* testsuite/libgomp.oacc-fortran/error_stop-2.f: Likewise.
* testsuite/libgomp.oacc-fortran/error_stop-3.f: Likewise.
* testsuite/libgomp.oacc-fortran/stop-1.f: Likewise.
* testsuite/libgomp.oacc-fortran/stop-2.f: Likewise.
* testsuite/libgomp.oacc-fortran/stop-3.f: Likewise.
gcc/fortran/ChangeLog:
2020-05-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/95191
* libgfortran.h (libgfortran_error_codes): Add
LIBERROR_BAD_WAIT_ID.
libgfortran/ChangeLog:
2020-05-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/95191
* io/async.c (async_wait_id): Generate error if ID is higher
than the highest current ID.
* runtime/error.c (translate_error): Handle LIBERROR_BAD_WAIT_ID.
libgomp/ChangeLog:
2020-05-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/95191
* testsuite/libgomp.fortran/async_io_9.f90: New test.
This patch adds very basic allocator support (omp_{init,destroy}_allocator,
omp_{alloc,free}, omp_[sg]et_default_allocator).
The plan is to use memkind (likely dlopened) for high bandwidth memory, but
that part isn't implemented yet, probably mlock for pinned memory and see
what other options there are for other kinds of memory.
For offloading targets, we need to decide if we want to support the
dynamic allocators (and on which targets), or if e.g. all we do is at compile
time replace omp_alloc/omp_free calls with constexpr predefined allocators
with something special.
And allocate directive and allocator/uses_allocators clauses are future work
too.
2020-05-19 Jakub Jelinek <jakub@redhat.com>
* omp.h.in (omp_uintptr_t): New typedef.
(__GOMP_UINTPTR_T_ENUM): Define.
(omp_memspace_handle_t, omp_allocator_handle_t, omp_alloctrait_key_t,
omp_alloctrait_value_t, omp_alloctrait_t): New typedefs.
(__GOMP_DEFAULT_NULL_ALLOCATOR): Define.
(omp_init_allocator, omp_destroy_allocator, omp_set_default_allocator,
omp_get_default_allocator, omp_alloc, omp_free): Declare.
* libgomp.h (struct gomp_team_state): Add def_allocator field.
(gomp_def_allocator): Declare.
* libgomp.map (OMP_5.0.1): Export omp_set_default_allocator,
omp_get_default_allocator, omp_init_allocator, omp_destroy_allocator,
omp_alloc and omp_free.
* team.c (gomp_team_start): Copy over ts.def_allocator.
* env.c (gomp_def_allocator): New variable.
(parse_wait_policy): Adjust function comment.
(parse_allocator): New function.
(handle_omp_display_env): Print OMP_ALLOCATOR.
(initialize_env): Call parse_allocator.
* Makefile.am (libgomp_la_SOURCES): Add allocator.c.
* allocator.c: New file.
* icv.c (omp_set_default_allocator, omp_get_default_allocator): New
functions.
* testsuite/libgomp.c-c++-common/alloc-1.c: New test.
* testsuite/libgomp.c-c++-common/alloc-2.c: New test.
* testsuite/libgomp.c-c++-common/alloc-3.c: New test.
* Makefile.in: Regenerated.
2020-05-14 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/95119
* io/close.c (close_status): Add CLOSE_INVALID.
(st_close): Return early on invalid STATUS parameter.
2020-05-14 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/95119
* testsuite/libgomp.fortran/close_errors_1.f90: New test.
