2007-06-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
Zdenek Dvorak <dvorakz@suse.cz>
Richard Guenther <rguenther@suse.de>
Kaz Kojima <kkojima@gcc.gnu.org>
* tree-vrp.c (compare_values_warnv): Convert val2 to
the type of val1.
(extract_range_from_assert): Create
POINTER_PLUS_EXPR for pointer types.
(extract_range_from_binary_expr): Handle
only POINTER_PLUS_EXPR, MIN_EXPR, and MAX_EXPR
for pointer types.
* doc/c-tree.texi (POINTER_PLUS_EXPR): Document.
* tree-ssa-loop-niter.c (split_to_var_and_offset): Handle
POINTER_PLUS_EXPR as PLUS_EXPR.
(number_of_iterations_lt_to_ne):
For pointer types, use sizetype when
creating MINUS_EXPR/PLUS_EXPRs.
(assert_loop_rolls_lt): For pointer types, use sizetype when
creating MINUS_EXPR/PLUS_EXPRs.
(number_of_iterations_le): Likewise.
(expand_simple_operations): POINTER_PLUS_EXPR are simple also.
(derive_constant_upper_bound): Handle POINTER_PLUS_EXPR just
like PLUS_EXPR and MINUS_EXPR.
* tree-pretty-print.c (dump_generic_node): Handle
POINTER_PLUS_EXPR.
(op_prio): Likewise.
(op_symbol_1): Likewise.
* optabs.c (optab_for_tree_code): Likewise.
* tree-ssa-loop-manip.c (create_iv): Handle pointer base
specially.
* tree-tailcall.c (process_assignment): Mention
POINTER_PLUS_EXPR in a TODO comment.
* tree.c (build2_stat): Assert when trying to use PLUS_EXPR or
MINUS_EXPR with a pointer. Also assert for POINTER_PLUS_EXPR
not used with a pointer and an integer type.
* tree-scalar-evolution.c (add_to_evolution_1): Convert the
increment using chrec_convert_rhs instead of chrec_convert.
(follow_ssa_edge_in_rhs): Handle POINTER_PLUS_EXPR like
PLUS_EXPR except for the right hand side's type will be
sizetype.
(interpret_rhs_modify_stmt): Handle POINTER_PLUS_EXPR.
(fold_used_pointer_cast): Kill.
(pointer_offset_p): Kill.
(fold_used_pointer): Kill.
(pointer_used_p): Kill.
(analyze_scalar_evolution_1 <case GIMPLE_MODIFY_STMT>): Don't
call fold_used_pointer.
(instantiate_parameters_1): Convert the increment
using chrec_convert_rhs instead of chrec_convert.
Handle POINTER_PLUS_EXPR as PLUS_EXPR.
* builtins.c (get_pointer_alignment): Handle POINTER_PLUS_EXPR
instead of PLUS_EXPR.
(expand_builtin_strcat): Create a POINTER_PLUS_EXPR instead of
PLUS_EXPR for pointers.
(std_gimplify_va_arg_expr): Likewise.
(fold_builtin_memory_op): Likewise.
(fold_builtin_strstr): Likewise.
(fold_builtin_strchr): Likewise.
(fold_builtin_strrchr): Likewise.
(fold_builtin_strpbrk): Likewise.
(expand_builtin_memory_chk): Likewise.
(fold_builtin_memory_chk): Likewise.
(std_expand_builtin_va_start): Use
sizetype for the call to make_tree and then convert
to the pointer type.
(fold_builtin_memchr): Use POINTER_PLUS_EXPR
instead of PLUS_EXPR for adding to a pointer.
(std_gimplify_va_arg_expr): Use fold_build2 for
the creating of POINTER_PLUS_EXPR. For the BIT_AND_EXPR, cast
the operands to sizetype first and then cast the BIT_AND_EXPR
back to the pointer type.
* fold-const.c (build_range_check): Handle pointer types
specially.
(extract_array_ref): Look for POINTER_PLUS_EXPR instead
of PLUS_EXPR's. Make sure the offset is converted to
sizetype.
(try_move_mult_to_index): Strip the NOPs from the offset.
Remove code argument and replace all uses with PLUS_EXPR.
(fold_to_nonsharp_ineq_using_bound): Handle pointer types
specially. Don't use a pointer type for MINUS_EXPR.
(fold_unary): Handle for (T1)(X op Y),
only p+ as that is the only as that can be handled for
binary operators now.
(fold_binary <case POINTER_PLUS_EXPR>): Add folding of
POINTER_PLUS_EXPR.
<case PLUS_EXPR>: Add folding of PTR+INT into
PTR p+ INT.
Don't call try_move_mult_to_index.
<case MINUS_EXPR>: Fold (PTR0 p+ A) - (PTR1 p+ B)
into (PTR0 - PTR1) + (A - B). Fold (PTR0 p+ A) - PTR1 into
(PTR0 - PTR1) + A iff (PTR0 - PTR1) simplifies.
Don't call try_move_mult_to_index.
(tree_expr_nonnegative_warnv_p): Handle POINTER_PLUS_EXPR.
(tree_expr_nonzero_p): Likewise.
(fold_indirect_ref_1): Look at POINTER_PLUS_EXPR instead
of PLUS_EXPR for the complex expression folding.
* tree-chrec.c (chrec_fold_plus_poly_poly): If the
first chrec is a pointer type, then the second should
be sizetype and not the first's type.
For POINTER_PLUS_EXPR, use a different right hand side type.
Handle POINTER_PLUS_EXPR like PLUS_EXPR.
(chrec_fold_plus_1): For POINTER_PLUS_EXPR, use a
different right hand side type.
Handle POINTER_PLUS_EXPR like PLUS_EXPR.
(chrec_fold_plus): For pointer types, use POINTER_PLUS_EXPR
instead of PLUS_EXPR.
When either operand is zero, convert the other operand.
(chrec_apply): Use chrec_convert_rhs
on the argument x instead of chrec_convert.
(reset_evolution_in_loop): For pointer types, the new_evol
should be sizetype.
(convert_affine_scev): For POINTER_PLUS_EXPR, use a
different right hand side type.
Handle POINTER_PLUS_EXPR like PLUS_EXPR.
(chrec_convert_rhs): New function.
(chrec_convert_aggressive): For POINTER_PLUS_EXPR, use a
different right hand side type.
Handle POINTER_PLUS_EXPR like PLUS_EXPR.
* tree-chrec.h (chrec_convert_rhs): New prototype.
(build_polynomial_chrec): For pointer types, the right hand
* tree-ssa-ccp.c (maybe_fold_stmt_indirect): Look for
POINTER_PLUS_EXPR instead of PLUS_EXPR's.
Remove subtraction case as it is always addition now.
Make sure the offset is converted to sizetype.
(fold_stmt_r): Don't handle PLUS_EXPR/MINUS_EXPR specially.
Handle POINTER_PLUS_EXPR like PLUS_EXPR was handled before.
* tree-ssa-loop-ivopts.c (determine_base_object): Abort for
PLUS_EXPR in pointer type.
Handle POINTER_PLUS_EXPR.
(tree_to_aff_combination): Likewise.
(force_expr_to_var_cost): Likewise.
(force_expr_to_var_cost): Likewise. Create a POINTER_PLUS_EXPR
instead of PLUS_EXPR for pointers.
* c-format.c (check_format_arg): Handle POINTER_PLUS_EXPR
instead of PLUS_EXPR of pointer types.
* tree-stdarg.c (va_list_counter_bump): Handle POINTER_PLUS_EXPR
as PLUS_EXPR.
(check_va_list_escapes): Likewise.
(check_all_va_list_escapes): Likewise.
* dwarf2out.c (loc_descriptor_from_tree_1):
Handle POINT_PLUS_EXPR as a PLUS_EXPR.
* expr.c (expand_expr_real_1): Handle POINTER_PLUS_EXPR.
(string_constant): Likewise.
* tree-ssa-address.c (tree_mem_ref_addr): When adding
the offset to the base, use POINTER_PLUS_EXPR.
(add_to_parts): Convert the index to sizetype.
(create_mem_ref): Create A POINTER_PLUS_EXPR for the one case.
* matrix-reorg.c (collect_data_for_malloc_call): Stmt
will now only be either INDIRECT_REF and POINTER_PLUS_EXPR.
Offset only holds something for PLUS_EXPR.
(ssa_accessed_in_tree): Handle POINTER_PLUS_EXPR just as
a PLUS_EXPR.
(analyze_transpose): POINTER_PLUS_EXPR will only show up now
and not PLUS_EXPR.
(analyze_accesses_for_modify_stmt): Likewise.
Remove comment about the type being integral type as it is
wrong now.
(can_calculate_expr_before_stmt): Handle POINTER_PLUS_EXPR as
PLUS_EXPR.
(transform_access_sites): POINTER_PLUS_EXPR will only show up now
and not PLUS_EXPR.
Correct the type which the artimentic is done in (is now
sizetype).
Reindent one loop.
* tree-data-ref.c (split_constant_offset): Handle
POINTER_PLUS_EXPR
* tree-affine.c (tree_to_aff_combination): Likewise.
* c-typeck.c (build_unary_op): For pointers create the increment
as a sizetype. Create a POINTER_PLUS_EXPR instead of PLUS_EXPR
for pointers.
* gimplify.c (gimplify_self_mod_expr): Create a
POINTER_PLUS_EXPR instead of PLUS_EXPR for pointers.
(gimplify_omp_atomic_fetch_op): Handle POINTER_PLUS_EXPR.
* tree.def (POINTER_PLUS_EXPR): New tree code.
* tree-predcom.c (ref_at_iteration): If we have a pointer
type do the multiplication in sizetype.
* tree-mudflap.c (mf_xform_derefs_1): Create a
POINTER_PLUS_EXPR instead of PLUS_EXPR for pointers.
* tree-ssa-forwprop.c
(forward_propagate_addr_into_variable_array_index):
Don't expect there to be a cast for the index as that
does not exist anymore.
(forward_propagate_addr_expr_1): Check for POINTER_PLUS_EXPR
instead of PLUS_EXPR.
Don't check for the first operand of the POINTER_PLUS_EXPR
was the index as it cannot be.
Call forward_propagate_addr_into_variable_array_index with
the SSA_NAME instead of the statement.
* varasm.c (const_hash_1): Handle POINTER_PLUS_EXPR.
(compare_constant): Likewise.
(copy_constant): Likewise.
(compute_reloc_for_constant): Likewise.
(output_addressed_constants): Likewise.
(initializer_constant_valid_p): Likewise.
* tree-ssa.c (tree_ssa_useless_type_conversion_1):
Convert the MIN/MAX of the inner type to the outer
type before comparing them.
* tree-ssa-loop-prefetch.c (idx_analyze_ref): Handle
POINTER_PLUS_EXPR instead of PLUS_EXPR.
(issue_prefetch_ref): Create a POINTER_PLUS_EXPR instead
of PLUS_EXPR for pointers.
* tree-inline.c (estimate_num_insns_1): Handle
POINTER_PLUS_EXPR.
* tree-vect-transform.c (vect_create_addr_base_for_vector_ref):
Create a POINTER_PLUS_EXPR instead of PLUS_EXPR for pointers.
(bump_vector_ptr): Create a POINTER_PLUS_EXPR
instead of PLUS_EXPR for the pointer increment statement.
(vect_update_ivs_after_vectorizer): For pointer types, create
POINTER_PLUS_EXPR instead of PLUS_EXPR and also create
MULT_EXPR in sizetype.
(vect_gen_niters_for_prolog_loop): Add a cast when creating
byte_misalign.
* tree-object-size.c (plus_expr_object_size): Handle
POINTER_PLUS_EXPR instead of PLUS_EXPR. Removing all the extra
code which is trying to figure out which side is a pointer and
is the index.
(check_for_plus_in_loops_1): Likewise.
(check_for_plus_in_loops): Likewise.
* c-common.c (pointer_int_sum): Create a
POINTER_PLUS_EXPR instead of PLUS_EXPR for pointers.
* tree-ssa-structalias.c (handle_ptr_arith): Handle
only POINTER_PLUS_EXPR. Removing all the extra
code which is trying to figure out which side is a pointer and
is the index.
* tree-cfg.c (verify_expr): Add extra checking for pointers and
PLUS_EXPR and MINUS_EXPR.
Also add checking to make sure the operands of POINTER_PLUS_EXPR
are correct.
* config/frv/frv.c (frv_expand_builtin_va_start): Use sizetype
with make_tree, instead of a pointer type.
* config/s390/s390.c (s390_va_start): Use POINTER_PLUS_EXPR
for pointers instead of PLUS_EXPR.
(s390_gimplify_va_arg): Likewise.
* config/spu/spu.c (spu_va_start): Create POINTER_PLUS_EXPR
instead of PLUS_EXPR when doing addition on pointer
types. Use sizetype for the second operand.
(spu_gimplify_va_arg_expr): Likewise.
* config/sparc/sparc.c (sparc_gimplify_va_arg): Use
POINTER_PLUS_EXPR instead of PLUS_EXPR when the operand was
a pointer. Don't create a BIT_AND_EXPR for pointer types.
* config/i386/i386.c (ix86_va_start): Use POINTER_PLUS_EXPR
for the pointer addition and also use size_int/sizetype
for the offset.
(ix86_gimplify_va_arg): Likewise.
Perform BIT_AND_EXPR on sizetype arguments.
* config/sh/sh.c (sh_va_start): Call make_tree with sizetype
and convert its result to a pointer type. Use POINTER_PLUS_EXPR
for the pointer additions and also use size_int for the offsets.
(sh_gimplify_va_arg_expr): Use POINTER_PLUS_EXPR for the pointer
additions and also use size_int for the offsets. Perform
BIT_AND_EXPR on sizetype arguments.
* config/ia64/ia64.c (ia64_gimplify_va_arg): Use
POINTER_PLUS_EXPR for pointers and create the
BIT_AND_EXPR in sizetype.
* config/rs6000/rs6000.c (rs6000_va_start): Use POINTER_PLUS_EXPR
instead of PLUS_EXPR for pointer addition.
(rs6000_va_start): Likewise.
Also use sizetype for the offset.
* config/pa/pa.c (reloc_needed): Handle POINTER_PLUS_EXPR
as PLUS_EXPR/MINUS_EXPR.
(hppa_gimplify_va_arg_expr): Don't create MINUS_EXPR or
PLUS_EXPR for pointers, instead use POINTER_PLUS_EXPR.
Don't use BIT_AND_EXPR on a pointer type, convert the
expression to sizetype first.
* config/mips/mips.c (mips_va_start): Use POINTER_PLUS_EXPR
for pointers.
(mips_gimplify_va_arg_expr): Likewise.
Don't create BIT_AND_EXPR in a pointer type.
2007-06-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
* trans-intrinsic.c (gfc_conv_intrinsic_repeat): Use
POINTER_PLUS_EXPR instead of PLUS_EXPR for pointer addition.
* trans-expr.c (gfc_trans_string_copy): Create
POINTER_PLUS_EXPR instead of a PLUS_EXPR
for pointer types.
2007-06-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
* typeck.c (build_binary_op): For templates build the
expression in pieces to avoid the assert in build2_stat.
(get_member_function_from_ptrfunc):
Change over to using POINTER_PLUS_EXPR and convert
the second operand to sizetype.
* typeck2.c (build_m_component_ref): Likewise.
* init.c (expand_virtual_init): Create a POINTER_PLUS_EXPR
instead of PLUS_EXPR for pointers.
(build_new_1): Likewise.
(build_vec_delete_1): Likewise.
(build_vec_delete): Likewise.
* class.c (build_base_path): Likewise.
(build_base_path): Likewise.
(convert_to_base_statically): Likewise.
(fixed_type_or_null): Handle POINTER_PLUS_EXPR.
(get_vtbl_decl_for_binfo): Handle POINTER_PLUS_EXPR
instead of PLUS_EXPR.
(dfs_accumulate_vtbl_inits): Create a POINTER_PLUS_EXPR
instead of PLUS_EXPR for pointers.
* call.c (build_special_member_call): Likewise.
* rtti.c (build_headof): Likewise.
Use sizetype instead of ptrdiff_type_node.
(tinfo_base_init): Create a POINTER_PLUS_EXPR
instead of PLUS_EXPR for pointers.
* except.c (expand_start_catch_block): Do a
NEGATIVE and then a POINTER_PLUS_EXPR instead
of a MINUS_EXPR.
* cp-gimplify.c (cxx_omp_clause_apply_fn): Convert
PLUS_EXPR on pointer types over to use
POINTER_PLUS_EXPR and remove the conversion
to the pointer types.
* method.c (thunk_adjust): Use POINTER_PLUS_EXPR for
adding to a pointer type. Use size_int instead of
ssize_int. Convert the index to sizetype before
adding it to the pointer.
2007-06-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
* trans.c (Attribute_to_gnu): When subtracting an
offset from a pointer, use POINTER_PLUS_EXPR with
NEGATE_EXPR instead of MINUS_EXPR.
(gnat_to_gnu): Likewise.
* utils.c (convert): When converting between
thin pointers, use POINTER_PLUS_EXPR and sizetype
for the offset.
* utils2.c (known_alignment): POINTER_PLUS_EXPR
have the same semantics as PLUS_EXPR for alignment.
(build_binary_op): Add support for the semantics of
POINTER_PLUS_EXPR's operands.
When adding an offset to a pointer, use POINTER_PLUS_EXPR.
2007-06-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
* class.c (make_class_data): Build the index in sizetype.
Use POINTER_PLUS_EXPR instead of PLUS_EXPR when
adding to a pointer type.
(build_symbol_entry): Likewise.
* expr.c (build_java_arrayaccess): Likewise.
(build_field_ref): Likewise.
(build_known_method_ref): Likewise.
(build_invokevirtual): Likewise.
* except.c (build_exception_object_ref): Do a
NEGATIVE and then a POINTER_PLUS_EXPR instead
of a MINUS_EXPR.
2007-06-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
PR tree-opt/32225
* gcc.c-torture/compile/20070605-1.c: New test.
* gcc.c-torture/compile/20070603-1.c: New testcase.
* gcc.c-torture/compile/20070603-2.c: New testcase.
* gcc.c-torture/compile/20070531-1.c: New test.
PR tree-opt/32167
* gcc.c-torture/compile/20070531-2.c: New test.
PR tree-opt/32144
* gcc.c-torture/compile/20070529-1.c: New test.
PR tree-opt/32145
* gcc.c-torture/compile/20070529-2.c: New test.
PR tree-opt/32015
* gcc.c-torture/compile/20070520-1.c: New test.
* g++.dg/ext/java-1.C: New test.
* gcc.dg/vect/vect-106.c: We are now able to vectorize two
loops instead of one. Remove the "can't determine dependence"
check.
* gcc.dg/tree-ssa/20030815-1.c: Remove testcase which is no longer
needed as the cast is gone in the first place.
* gcc.dg/max-1.c: Change local variable a to be a global one.
* gcc.dg/tree-ssa/ssa-pre-8.c: Update testcase since we don't
have a cast which is PREd.
From-SVN: r125755
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* tree.h (enum tree_code_class): Add tcc_vl_exp.
(VL_EXP_CLASS_P): New.
(TREE_OPERAND_CHECK): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(TREE_OPERAND_CHECK_CODE): Likewise.
(GIMPLE_STMT_OPERAND_CHECK): Likewise.
(TREE_RTL_OPERAND_CHECK): Likewise.
(tree_operand_check_failed): Make second parameter the whole tree
instead of its code. Fixed callers.
(VL_EXP_CHECK): New.
(TREE_OPERAND_LENGTH): New.
(VL_EXP_OPERAND_LENGTH): New.
(CALL_EXPR_FN): New.
(CALL_EXPR_STATIC_CHAIN): New.
(CALL_EXPR_ARGS): New.
(CALL_EXPR_ARG): New.
(call_expr_nargs): New.
(CALL_EXPR_ARGP): New.
(build_nt_call_list): Declare.
(build_vl_exp_stat): Declare.
(build_vl_exp): New.
(build_call_list): Declare.
(build_call_nary): Declare.
(build_call_valist): Declare.
(build_call_array): Declare.
(call_expr_arg): Declare.
(call_expr_argp): Declare.
(call_expr_arglist): Declare.
(fold_build_call_list): Declare.
(fold_build_call_list_initializer): Declare.
(fold_call_expr): Declare to replace fold_builtin.
(fold_builtin_fputs): Update to agree with modified definition.
(fold_builtin_strcpy): Likewise.
(fold_builtin_strncpy): Likewise.
(fold_builtin_memory_chk): Likewise.
(fold_builtin_stxcpy_chk): Likewise.
(fold_builtin_strncpy_chk): Likewise.
(fold_builtin_next_arg): Likewise.
(fold_build_call_expr): Declare.
(fold_builtin_call_list): Declare.
(fold_builtin_call_valist): Declare.
(build_call_expr): Declare.
(validate_arglist): Update to agree with modified definition.
(tree_operand_length): New.
(call_expr_arg_iterator): New.
(init_call_expr_arg_iterator): New.
(next_call_expr_arg): New.
(first_call_expr_arg): New.
(more_call_expr_args_p): New.
(FOR_EACH_CALL_EXPR_ARG): New.
* tree.c (tree_code_class_string): Add entries for tcc_vl_exp
and tcc_gimple_stmt.
(tree_code_size): Update documentation. Use sizeof (tree) rather
than sizeof (char *).
(tree_size): Likewise. Add case for tcc_vl_exp.
(tree_node_structure): Add case for tcc_vl_exp.
(contains_placeholder_p): Likewise.
(substitute_in_expr): Likewise.
(substitute_placeholder_in_expr): Likewise.
(stabilize_reference_1): Likewise.
(build3_stat): Remove logic for CALL_EXPRs. Replace with assertion
to diagnose breakage of this interface for constructing CALL_EXPRs.
(build_nt): Add similar assertion here.
(build_nt_call_list): New.
(simple_cst_equal) <CALL_EXPR>: Rewrite to use new accessors.
(iterative_hash_expr): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(get_callee_fndecl): Use new CALL_EXPR accessors.
(tree_operand_check_failed): Change parameters to pass entire node
instead of its code, so that we can call TREE_OPERAND_LENGTH on it.
(process_call_operands): New.
(build_vl_exp_stat): New.
(build_call_list): New.
(build_call_nary): New.
(build_call_valist): New.
(build_call_array): New.
(walk_tree): Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(call_expr_arglist): New.
* tree.def (CALL_EXPR): Change representation of CALL_EXPRs to use
tcc_vl_exp instead of a fixed-size tcc_expression.
* doc/c-tree.texi (CALL_EXPR): Document new representation and
accessors for CALL_EXPRs.
(AGGR_INIT_EXPR): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* builtins.c (c_strlen): Return NULL_TREE instead of 0.
(expand_builtin_nonlocal_goto): Change parameter to be entire
CALL_EXPR instead of an arglist. Use new CALL_EXPR accessors.
(expand_builtin_prefetch): Likewise.
(expand_builtin_classify_type): Likewise.
(mathfn_built_in): Return NULL_TREE instead of 0.
(expand_errno_check): Use new CALL_EXPR accessors.
(expand_builtin_mathfn): Use new CALL_EXPR accessors and constructors.
Return NULL_RTX instead of 0.
(expand_builtin_mathfn_2): Likewise.
(expand_builtin_mathfn_3): Likewise.
(expand_builtin_interclass_mathfn): Likewise.
(expand_builtin_sincos): Likewise.
(expand_builtin_cexpi): Likewise.
(expand_builtin_int_roundingfn): Likewise.
(expand_builtin_int_roundingfn_2): Likewise.
(expand_builtin_pow): Likewise.
(expand_builtin_powi): Likewise.
(expand_builtin_strlen): Pass entire CALL_EXPR as parameter instead
of arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_RTX instead of 0.
(expand_builtin_strstr): Likewise.
(expand_builtin_strchr): Likewise.
(expand_builtin_strrchr): Likewise.
(expand_builtin_strpbrk): Likewise.
(expand_builtin_memcpy): Likewise.
(expand_builtin_mempcpy): Likewise.
(expand_builtin_mempcpy_args): New.
(expand_builtin_memmove): Similarly to expand_builtin_mempcpy.
(expand_builtin_memmove_args): New.
(expand_builtin_bcopy): Similarly to expand_builtin_mempcpy.
(expand_movstr): Likewise.
(expand_builtin_strcpy): Likewise.
(expand_builtin_strcpy_args): New.
(expand_builtin_stpcpy): Similarly to expand_builtin_strcpy.
(expand_builtin_strncpy): Likewise.
(expand_builtin_memset): Likewise.
(expand_builtin_memset_args): New.
(expand_builtin_bzero): Similarly to expand_builtin_memset.
(expand_builtin_memcmp): Likewise.
(expand_builtin_strcmp): Likewise.
(expand_builtin_strncmp): Likewise.
(expand_builtin_strcat): Likewise.
(expand_builtin_strncat): Likewise.
(expand_builtin_strspn): Likewise.
(expand_builtin_strcspn): Likewise.
(expand_builtin_args_info): Likewise.
(expand_builtin_va_start): Likewise.
(gimplify_va_arg_expr): Likewise.
(expand_builtin_va_end): Likewise.
(expand_builtin_va_copy): Likewise.
(expand_builtin_frame_address): Likewise.
(expand_builtin_alloca): Likewise.
(expand_builtin_bswap): Likewise.
(expand_builtin_unop): Likewise.
(expand_builtin_fputs): Likewise.
(expand_builtin_expect): Likewise.
(expand_builtin_fabs): Likewise.
(expand_builtin_copysign): Likewise.
(expand_builtin_printf): Likewise.
(expand_builtin_fprintf): Likewise.
(expand_builtin_sprintf): Likewise.
(expand_builtin_init_trampoline): Likewise.
(expand_builtin_signbit): Likewise.
(expand_builtin_fork_or_exec): Likewise.
(expand_builtin_sync_operation): Likewise.
(expand_builtin_compare_and_swap): Likewise.
(expand_builtin_lock_test_and_set): Likewise.
(expand_builtin_lock_release): Likewise.
(expand_builtin): Likewise.
(builtin_mathfn_code): Likewise.
(fold_builtin_constant_p): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_expect): Likewise.
(fold_builtin_classify_type): Likewise.
(fold_builtin_strlen): Likewise.
(fold_builtin_nan): Likewise.
(integer_valued_real_p): Likewise.
(fold_trunc_transparent_mathfn): Likewise.
(fold_fixed_mathfn): Likewise.
(fold_builtin_cabs): Likewise.
(fold_builtin_sqrt): Likewise.
(fold_builtin_cbrt): Likewise.
(fold_builtin_cos): Likewise.
(fold_builtin_cosh): Likewise.
(fold_builtin_tan): Likewise.
(fold_builtin_sincos): Likewise.
(fold_builtin_cexp): Likewise.
(fold_builtin_trunc): Likewise.
(fold_builtin_floor): Likewise.
(fold_builtin_ceil): Likewise.
(fold_builtin_round): Likewise.
(fold_builtin_int_roundingfn): Likewise.
(fold_builtin_bitop): Likewise.
(fold_builtin_bswap): Likewise.
(fold_builtin_logarithm): Likewise.
(fold_builtin_hypot): Likewise.
(fold_builtin_pow): Likewise.
(fold_builtin_powi): Likewise.
(fold_builtin_exponent): Likewise.
(fold_builtin_memset): Likewise.
(fold_builtin_bzero): Likewise.
(fold_builtin_memory_op): Likewise.
(fold_builtin_bcopy): Deleted; call site changed to invoke
fold_builtin_memory_op directly.
(fold_builtin_strcpy): Similarly as for fold_builtin_memory_op.
(fold_builtin_strncpy): Likewise.
(fold_builtin_memcmp): Likewise.
(fold_builtin_strcmp): Likewise.
(fold_builtin_strncmp): Likewise.
(fold_builtin_signbit): Likewise.
(fold_builtin_copysign): Likewise.
(fold_builtin_isascii): Likewise.
(fold_builtin_toascii): Likewise.
(fold_builtin_isdigit): Likewise.
(fold_builtin_fabs): Likewise.
(fold_builtin_abs): Likewise.
(fold_builtin_fmin_fmax): Likewise.
(fold_builtin_carg): Likewise.
(fold_builtin_classify): Likewise.
(fold_builtin_unordered_cmp): Likewise.
(fold_builtin_0, fold_builtin_2, fold_builtin_3, fold_builtin_4):
New functions split out from fold_builtin_1.
(fold_builtin_n): New.
(fold_builtin_varargs): New.
(fold_builtin): Deleted. Most callers changed to use fold_call_expr
instead.
(fold_call_expr): New.
(build_function_call_expr): Rewrite to use new helper function.
(fold_builtin_call_list): New.
(build_call_expr): New.
(fold_builtin_call_valist): New.
(rewrite_call_expr): New.
(validate_arg): New.
(validate_arglist): Change parameter to be entire CALL_EXPR instead
of an arglist. Change return type to bool. Use new CALL_EXPR
accessors.
(fold_builtin_strstr): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_strchr): Likewise.
(fold_builtin_strrchr): Likewise.
(fold_builtin_strpbrk): Likewise.
(fold_builtin_strcat): Likewise.
(fold_builtin_strncat): Likewise.
(fold_builtin_strspn): Likewise.
(fold_builtin_strcspn): Likewise.
(fold_builtin_fputs): Likewise.
(fold_builtin_next_arg): Likewise.
(fold_builtin_sprintf): Likewise.
(expand_builtin_object_size): Use new CALL_EXPR accessors. Use
NULL_RTX instead of 0.
(expand_builtin_memory_chk): Likewise.
(maybe_emit_chk_warning): Likewise.
(maybe_emit_sprintf_chk_warning): Likewise.
(fold_builtin_object_size): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_memory_chk): Likewise.
(fold_builtin_stxcpy_chk): Likewise.
(fold_builtin_strncpy_chk): Likewise.
(fold_builtin_strcat_chk): Likewise.
(fold_builtin_strcat_chk): Likewise.
(fold_builtin_strncat_chk): Likewise.
(fold_builtin_sprintf_chk): Likewise.
(fold_builtin_snprintf_chk): Likewise.
(fold_builtin_printf): Likewise.
(fold_builtin_vprintf): Likewise.
* fold-const.c (negate_expr_p): Use new CALL_EXPR accessors and
constructors.
(operand_equal_p): Add separate tcc_vl_exp/CALL_EXPR case.
(make_range): Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(extract_muldiv_1): Add VL_EXP_CLASS_P case.
(fold_mathfn_compare): Use new CALL_EXPR accessors and constructors.
(fold_unary): Likewise.
(fold_binary): Likewise.
(fold_ternary): Remove CALL_EXPR case, since they are no longer
ternary expressions.
(fold): Add logic for tcc_vl_exp.
(fold_checksum_tree): Make it know about tcc_vl_exp. Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(fold_build3_stat): Add assertion to flag broken interface for
constructing CALL_EXPRs.
(fold_build_call_list): New.
(fold_build_call_list_initializer): New.
(tree_expr_nonnegative_p): Use new CALL_EXPR accessors and
constructors.
(fold_strip_sign_ops): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* tree-dump.c (dequeue_and_dump) <CALL_EXPR>: Use new CALL_EXPR
accessors and dump arguments explicitly.
* tree-pretty-print.c (do_niy): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(dump_generic_node): Use new CALL_EXPR accessors and walk arguments
explicitly.
(print_call_name): Use new CALL_EXPR accessors.
* print-tree.c (print_node): Add case tcc_vl_exp. Print
CALL_EXPR arguments explicitly instead of as a list. Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* tree-vrp.c (stmt_interesting_for_vrp): Use new CALL_EXPR accessors.
(vrp_visit_stmt): Likewise.
* tree-ssa-loop-im.c (outermost_invariant_loop_expr): Make it
know about tcc_vl_exp. Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(force_move_till_expr): Likewise.
* targhooks.c (default_external_stack_protect_fail): Use
build_call_expr instead of build_function_call_expr.
(default_hidden_stack_protect_fail): Likewise.
* tree-complex.c (expand_complex_libcall): Use build_call_expr to
build the call.
* cgraphbuild.c (build_cgraph_edges): Use new CALL_EXPR accessors
and walk arguments explicitly.
* tree-ssa-loop-niter.c (simplify_replace_tree): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(expand_simple_operations): Likewise.
(infer_loop_bounds_from_array): Use new CALL_EXPR accessors.
* gengtype.c (adjust_field_tree_exp): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
(walk_type): Tweak walking of arrays not to blow up on CALL_EXPRs.
* optabs.c (expand_widen_pattern-expr): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* value_prof.c (tree_ic): Use new CALL_EXPR accessors.
(tree_ic_transform): Likewise.
(interesting_stringop_to_profile_p): Pass entire CALL_EXPR as
parameter instead of arglist. Fix callers.
(tree_stringop_fixed_value): Use new CALL_EXPR accessors.
(tree_stringops_transform): Likewise.
(tree_indirect_call_to_profile): Likewise.
(tree_stringops_values_to_profile): Likewise.
* tree-tailcall.c (find_tail_calls): Use new CALL_EXPR iterator.
(eliminate_tail_call): Likewise.
* ipa-cp.c (ipcp_update_callgraph): Use new CALL_EXPR accessors.
* tree-scalar-evolution.c (chrec_contains_symbols_defined_in_loop):
Use TREE_OPERAND_LENGTH and generalize to handle any number of
operands.
(instantiate_parameters_1): Can't handle tcc_vl_exp here.
* omp-low.c (build_omp_barrier): Use build_call_expr.
(lower_rec_input_clauses): Likewise.
(lower_reduction_clauses): Likewise.
(expand_parallel_call): Likewise.
(maybe_catch_exception): Likewise.
(expand_omp_for_generic): Likewise.
(expand_omp_for_static_nochunk): Likewise.
(expand_omp_sections): Likewise.
(lower_omp_single_simple): Likewise.
(lower_omp_single_copy): Likewise.
(lower_omp_master): Likewise.
(lower_omp_ordered): Likewise.
(lower_omp_critical): Likewise.
* ipa-reference.c (check-call): Use new CALL_EXPR iterator.
(scan_for_static_refs): Create tcc_vl_exp case for CALL_EXPR.
* tree-gimple.c (is_gimple_call_addr): Fix doc.
(recalculate_side_effects): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH. Add tcc_vl_exp case.
* tree-chrec.c (chrec_contains_symbols): Use TREE_OPERAND_LENGTH
and generalize to handle any number of operands.
(chrec_contains_undetermined): Likewise.
(tree_contains_chrecs): Likewise.
(evolution_function_is_invariant_rec_p): Use TREE_OPERAND_LENGTH.
* cgraphunit.c (update_call_expr): Use new CALL_EXPR accessors.
* tree-ssa-ccp.c (ccp_fold): Use new CALL_EXPR accessors. Use
fold_call_expr instead of fold_builtin.
(ccp_fold_builtin): Likewise. Update calls into builtins.c to
match declarations there.
(fold_stmt): Use new CALL_EXPR constructor and accessors. Doc
updates.
* tree-ssa-loop-ivopts.c (expr_invariant_in_loop_p): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* ipa-pure-const.c (check_call): Use new CALL_EXPR accessors.
(scan_function): Add case tcc_vl_exp for CALL_EXPR.
* tree-stdarg.c (execute_optimize_stdarg): Use new CALL_EXPR
accessors.
* tree-ssa-math-opts.c (execute_cse_sincos_1): Use build_call_expr.
(execute_cse_sincos): Use new CALL_EXPR accessors.
* tree-ssa-alias.c (find_used_portions): Use new CALL_EXPR iterator.
* gimple-low.c (lower_function_body): Use build_call_expr.
(lower_builtin_setjmp): Likewise.
* expr.c (emit_block_move_via_libcall): Use build_call_expr.
(set_storage_via_libcall): Likewise.
(safe_from_p): Add tcc_vl_exp case. Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
(expand_expr_real_1): Use new CALL_EXPR accessors.
* tree-browser.c (store_child_info): Use TREE_OPERAND_LENGTH and
generalize to handle any number of operands.
(TB_parent_eq): Likewise.
* predict.c (expr_expected_value): Use new CALL_EXPR accessors.
(strip_builtin_expect): Likewise.
* function.c (gimplify_parameters): Use build_call_expr.
* tree-vectorizer.c (vect_is_simple_reduction): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* ipa-type-escape.c (check_call): Use new CALL_EXPR iterators.
(scan_for_refs): Add case tcc_vl_exp for CALL_EXPR.
* tree-data-ref.c (get_references_in_stmt): Use new CALL_EXPR
iterators.
* gimplify.c (build_stack_save_restore): Use build_call_expr.
(gimplify_decl_expr): Likewise.
(gimplify_call_expr): Use fold_call_expr instead of fold_builtin.
Use new CALL_EXPR iterators.
(gimplify_modify_expr_to_memcpy): Use build_call_expr.
(gimplify_modify_expr_to_memset): Likewise.
(gimplify_variable_sized_compare): Likewise.
(gimplify_omp_atomic_fetch_op): Likewise.
(gimplify_omp_atomic_pipeline): Likewise.
(gimplify_omp_atomic_mutex): Likewise.
(gimplify_function_tree): Likewise.
* calls.c (alloca_call_p): Use new CALL_EXPR accessors.
(call_expr_flags): Likewise.
(expand_call): Likewise.
* except.c (expand_builtin_eh_return_data_regno): Pass entire
CALL_EXPR as parameter instead of arglist. Use new CALL_EXPR
accessors.
* coverage.c (create_coverage): Use build_call_expr.
* tree-ssa-pre.c (expression_node_pool, list_node_pool): Delete.
(temp_call_expr_obstack): New.
(pool_copy_list): Delete.
(temp_copy_call_expr): New.
(phi_translate): Add case tcc_vl_exp for CALL_EXPR. Use new
CALL_EXPR accessors. Get rid of special goo for copying argument
lists and use temp_copy_call_expr instead.
(valid_in_sets): Add case tcc_vl_exp for CALL_EXPR. Use new
CALL_EXPR accessors.
(create_expression_by_pieces): Likewise. Use build_call_array
to construct the result instead of fold_build3.
(create_value_expr_from): Add tcc_vl_exp. Delete special goo for
dealing with argument lists.
(init_pre): Remove references to expression_node_pool and
list_node_pool. Init temp_call_expr_obstack instead.
(fini_pre): Remove references to expression_node_pool and
list_node_pool.
* tree-sra.c (sra_walk_call_expr): Use new CALL_EXPR accessors
and walk arguments explicitly instead of as a list.
* tree-mudflap.c (mf_build_check_statement_for): Use build_call_expr.
(mx_register_decls): Likewise.
(mudflap_register_call): Likewise.
(mudflap_finish_file): Likewise.
* ipa-prop.c (ipa_callsite_compute_count): Use new CALL_EXPR accessors.
(ipa_callsite_compute_param): Likewise.
* tree-vect-patterns.c (vect_recog_pow_pattern): Use new CALL_EXPR
accessors and constructor.
* tree-nested.c (convert_nl_goto_reference): Use new CALL_EXPR
accessors and constructor.
(convert_tramp_reference): Likewise.
(convert_call_expr): Likewise.
(finalize_nesting_tree_1): Likewise.
* tree-ssa.c (tree_ssa_useless_type_conversion): Use new CALL_EXPR
accessors.
* tree-ssa-loop-prefetch.c (issue_prefetch_ref): Use build_call_expr.
* tree-inline.c (initialize_inlined_parameters): Pass entire
CALL_EXPR as parameter instead of arglist. Use new CALL_EXPR
accessors.
(estimate_num_insns_1): Use new CALL_EXPR accessors.
(expand_call_inline): Tidy up call to initialize_inlined_parameters.
* tree-vect-transform.c (vect_create_epilog_for_reduction): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(vectorizable_reduction): Likewise.
(vectorizable_call): Use new CALL_EXPR iterators.
(vectorizable_conversion): Use build_call_expr.
(vectorizable_operation): Use TREE_OPERAND_LENGTH.
(vect_gen_widened_results_half): Use build_call_expr.
(vect_setup_realignment): Likewise.
(vectorizable_live_operation): Use TREE_OPERAND_LENGTH.
* tree-object-size.c (alloc_object_size): Use new CALL_EXPR accessors.
(pass_through_call): Likewise.
(compute_object_sizes): Likewise. Use fold_call_expr instead of
fold_builtin.
* tree-profile.c (tree_gen_interval_profiler): Use build_call_expr.
(tree_gen_pow2_profiler): Likewise.
(tree_gen_one_value_profiler): Likewise.
(tree_gen_ic_func_profiler): Likewise.
(tree_gen_average_profiler): Likewise.
(tree_gen_ior_profiler): Likewise.
* tree-ssa-structalias.c (get_constraint_for): Add case tcc_vl_exp.
(find_func_aliases): Use new CALL_EXPR accessors. Add case
tcc_vl_exp. Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* tree-ssa-reassoc.c (get_rank): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
* stmt.c (warn_if_unused_value): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
* convert.c (convert_to_real): Use new CALL_EXPR accessors and
constructor.
(convert_to_integer): Likewise.
* tree-ssa-operands.c (get_call_expr_operands): Use new CALL_EXPR
accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* config/alpha/alpha.c (alpha_expand_builtin): Use new CALL_EXPR
accessors.
* config/frv/frv.c (frv_expand_builtin): Likewise.
* config/s390/s390.c (s390_expand_builtin): Likewise.
* config/sparc/sparc.c (sparc_gimplify_va_arg): Use build_call_expr.
(sparc_expand_builtin): Use new CALL_EXPR accessors.
* config/i386/i386.c (ix86_function_ok_for_sibcall): Likewise.
(ix86_expand_binop_builtin): Pass entire CALL_EXPR as parameter
instead of arglist. Use new CALL_EXPR accessors on it. Fix callers.
(ix86_expand_store_builtin): Likewise.
(ix86_expand_unop_builtin): Likewise.
(ix86_expand_unop1_builtin): Likewise.
(ix86_expand_sse_compare): Likewise.
(ix86_expand_sse_comi): Likewise.
(ix86_expand_vec_init_builtin): Likewise.
(ix86_expand_vec_ext_builtin): Likewise.
(ix86_expand_vec_set_builtin): Likewise.
(ix86_expand_builtin): Use new CALL_EXPR accessors.
* config/sh/sh.c (sh_expand_builtin): Use new CALL_EXPR accessors.
* config/c4x/c4x.c (c4x_expand_builtin): Likewise.
* config/iq2000/iq2000.c (expand_one_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(iq2000_expand_builtin): Use new CALL_EXPR accessors.
* config/rs6000/rs6000-c.c (altivec_build_resolved_builtin): Use
build_call_expr.
* config/rs6000/rs6000.c (rs6000_gimplify_va_arg): Likewise.
(rs6000_expand_unop_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(altivec_expand_abs_builtin): Likewise.
(rs6000_expand_binop_builtin): Likewise.
(altivec_expand_predicate_builtin): Likewise.
(altivec_expand_lv_builtin): Likewise.
(spe_expand_stv_builtin): Likewise.
(altivec_expand_stv_builtin): Likewise.
(rs6000_expand_ternop_builtin): Likewise.
(altivec_expand_ld_builtin): Use new CALL_EXPR accessors.
(altivec_expand_st_builtin): Likewise.
(altivec_expand_dst_builtin): Likewise.
(altivec_expand_vec_init_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(altivec_expand_vec_set_builtin): Likewise.
(altivec_expand_vec_ext_builtin): Likewise.
(altivec_expand_builtin): Use new CALL_EXPR accessors.
(spe_expand_builtin): Likewise.
(spe_expand_predicate_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(spe_expand_evsel_builtin): Likewise.
(rs6000_expand_builtin): Use new CALL_EXPR accessors. VCFUX and
FCFSX cases must construct whole new CALL_EXPR, not just arglist.
* config/arm/arm.c (arm_expand_binop_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(arm_expand_unop_builtin): Likewise.
(arm_expand_builtin): Use new CALL_EXPR accessors.
* config/mips/mips.c (mips_expand_builtin): Use new CALL_EXPR
accessors.
* config/bfin/bfin.c (bfin_expand_binop_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(bfin_expand_unop_builtin): Likewise.
(bfin_expand_builtin): Use new CALL_EXPR accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* c-semantics.c (build_stmt): Add internal diagnostic check.
* c-pretty-print.c (pp_c_postfix_expression): Use new CALL_EXPR
accessors. Print arguments explicitly instead of as a list.
* c-typeck.c (build_function_call): Use new CALL_EXPR constructors.
* c-omp.c (c_finish_omp_barrier): Use build_call_expr.
(c_finish_omp_flish): Likewise.
* c-common.c (verify_tree): Use new CALL_EXPR accessors. Traverse
arguments explicitly instead of as a list. Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
(check_function_arguments_recurse): Use new CALL_EXPR accessors.
(c_warn_unused_result): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* cp-tree.def (AGGR_INIT_EXPR): Adjust documentation.
Change class to tcc_vl_exp.
* call.c (build_call): Use build_call_list instead
of build3.
(build_over_call): Likewise.
(build_new_method_call): Use build_min_non_dep_call_list
instead of build_min_non_dep.
* error.c (dump_call_expr_args): New function.
(dump_aggr_init_expr_args): New function.
(dump_expr) <AGGR_INIT_EXPR, CALL_EXPR, INDIRECT_REF>: Use them.
Update to use new CALL_EXPR and AGGR_INIT_EXPR accessor macros.
* cvt.c (convert_to_void): Use build_call_array instead
of build3; use new AGGR_INIT_EXPR accessor macros.
* mangle.c (write_expression): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* dump.c (cp_dump_tree) <AGGR_INIT_EXPR>: Update to use new
AGGR_INIT_EXPR accessor macros.
* cp-gimplify.c (cp_gimplify_init_expr): Use
AGGR_INIT_EXPR_SLOT to set the slot operand.
* cp-tree.h (AGGR_INIT_EXPR_FN): New macro.
(AGGR_INIT_EXPR_SLOT): New macro.
(AGGR_INIT_EXPR_ARG): New macro.
(aggr_init_expr_nargs): New macro.
(AGGR_INIT_EXPR_ARGP): New macro.
(aggr_init_expr_arg_iterator): New.
(init_aggr_init_expr_arg_iterator): New.
(next_aggr_init_expr_arg): New.
(first_aggr_init_expr_arg): New.
(more_aggr_init_expr_args_p): New.
(FOR_EACH_AGGR_INIT_EXPR_ARG): New.
(stabilize_aggr_init): New declaration.
(build_min_non_dep_call_list): Likewise.
* tree.c (process_aggr_init_operands): New function.
(build_aggr_init_array) New function.
(build_cplus_new): Update to use new CALL_EXPR and
AGGR_INIT_EXPR accessor macros. Replace use of build3 with
build_aggr_init_array.
(build_min_non_dep_call_list) New function.
(build_min_nt): Assert input code parameter is not a variable
length expression class.
(build_min, build_min_non_dep): Likewise.
(cp_tree_equal) <CALL_EXPR>: Iterate through the arguments
to check for equality instead of recursing. Handle tcc_vl_exp
tree code classes.
(stabilize_call): Update to only handle CALL_EXPRs, not
AGGR_INIT_EXPRs; use new CALL_EXPR accessor macros.
(stabilize_aggr_init): New function.
(stabilize_init): Use it.
* cxx-pretty-print.c (pp_cxx_postfix_expression)
<AGGR_INIT_EXPR, CALL_EXPR>: Update to use new CALL_EXPR and
AGGR_INIT_EXPR accessor macros and argument iterators.
* pt.c (tsubst_copy) <CALL_EXPR>: Replace build_nt with
build_vl_exp. Iterate through the operands, recursively
processing each one.
(tsubst_copy_and_build) <CALL_EXPR>: Update to use new
CALL_EXPR accessor macros.
(value_dependent_expression_p) <default>: Handle tcc_vl_exp
tree code classes. Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
* semantics.c (finish_call_expr): Use build_nt_call_list
instead of build_nt.
(simplify_aggr_init_expr): Update to use new AGGR_INIT_EXPR
accessor macros. Use build_call_array to construct the
CALL_EXPR node instead of build3
* decl2.c (build_offset_ref_call_from_tree): Use
build_nt_call_list and build_min_non_dep_call_list instead
of build_min_nt and build_min_non_dep.
* parser.c (cp_parser_postfix_expression) <CPP_OPEN_PAREN>:
Use build_nt_call_list instead of build_min_nt.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* java-tree.h (BUILD_MONITOR_ENTER): Use build_call_nary instead
of build3.
(BUILD_MONITOR_EXIT): Likewise.
* java-gimplify.c (java_gimplify_component_ref): Use build_call_expr.
(java_gimplify_modify_expr): Likewise.
* class.c (cache_this_class_ref): Use build_call_expr.
(build_static_field_ref): Likewise.
(emit_indirect_register_classes): Likewise.
(emit_register_classes): Likewise.
* resource.c (write_resource_constructor): Use build_call_expr.
* builtins.c (builtin_creator_function): Change interpretation of
the second parameter to be the whole CALL_EXPR instead of the arglist.
(max_builtin): Tweak parameter list. Use new CALL_EXPR accessors.
(min_builtin): Likewise.
(abs_builtin): Likewise.
(java_build_function_call_expr): Likewise.
(convert_real): Likewise.
(UNMARSHAL3): Likewise.
(UNMARSHAL4): Likewise.
(UNMARSHAL5): Likewise.
(build_arglist_for_builtin): Delete. Fix callers to use
build_call_expr instead.
(putObject_builtin): Tweak parameter list. Use new CALL_EXPR
accessors.
(compareAndSwapInt_builtin): Likewise.
(compareAndSwapLong_builtin): Likewise.
(compareAndSwapObject_builtin): Likewise.
(putVolatile_builtin): Likewise.
(getVolatile_builtin): Likewise.
(VMSupportsCS8_builtin): Likewise.
(check_for_builtin): Pass entire CALL_EXPR to builtin expander
instead of arglist.
* expr.c (build_java_athrow): Use build_call_nary instead of build3.
(build_java_throw_out_of_bounds_exception): Likewise.
(java_check_reference): Likewise.
(build_java_arraystore_check): Likewise.
(build_newarray): Likewise.
(build_anewarray): Likewise.
(expand_java_multinewarray): Use build_call_list instead of build3.
(build_java_monitor): Use build_call_nary instead of build3.
(java_create_object): Likewise.
(expand_java_NEW): Likewise.
(build_instanceof): Likewise.
(expand_java_CHECKCAST): Likewise.
(build_java_soft_divmod): Likewise.
(build_java_binop): Likewise.
(build_field_ref): Likewise.
(build_class_init): Likewise.
(rewrite_arglist_getcaller): Use build_call_expr.
(build_invokeinterface): Use build_call_nary instead of build3.
(expand_invoke): Use build_call_list instead of build3.
(build_jni_stub): Use build_call_nary, build_call_list, or
build_call_expr instead of build3.
(expand_java_field_op): Use build_call_expr instead of build3.
(force_evaluation_order): Use new CALL_EXPR accessors.
* lang.c (java_get_callee_fndecl): Use new CALL_EXPR accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* objc-act.c (receiver_is_class_object): Use new CALL_EXPR accessors.
(objc_get_callee_fndecl): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* trans-expr.c (gfc_conv_power_op): Use build_call_expr.
(gfc_conv_string_tmp): Likewise.
(gfc_conv_concat_op): Likewise.
(gfc_build_compare_string): Likewise.
(gfc_conv_function_call): Use build_call_list instead of build3.
* trans-array.c (gfc_trans_allocate_array_storage): Use
build_call_expr.
(gfc_grow_array): Likewise.
(gfc_trans_array_ctor_element): Likewise.
(gfc_trans_array_constructor_value): Likewise.
(gfc_array_allocate): Likewise.
(gfc_array_deallocate): Likewise.
(gfc_trans_auto_array_allocation): Likewise.
(gfc_trans_dummy_array_bias): Likewise.
(gfc_conv_array_parameter): Likewise.
(gfc_trans_dealloc_allocated): Likewise.
(gfc_duplicate_allocatable): Likewise.
* trans-openmp.c (gfc_trans_omp_barrier): Use build_call_expr.
(gfc_trans_omp_flush): Likewise.
* trans-stmt.c (gfc_conv_elementel_dependencies): Use build_call_expr.
(gfc_trans_pause): Likewise.
(gfc_trans_stop): Likewise.
(gfc_trans_character_select): Likewise.
(gfc_do_allocate): Likewise.
(gfc_trans_assign_need_temp): Likewise.
(gfc_trans_pointer_assign_need_temp): Likewise.
(gfc_trans_forall_1): Likewise.
(gfc_trans_where_2): Likewise.
(gfc_trans_allocate): Likewise.
(gfc_trans_deallocate): Likewise.
* trans.c (gfc_trans_runtime_check): Use build_call_expr.
* trans-io.c (gfc_trans_open): Use build_call_expr.
(gfc_trans_close): Likewise.
(build_filepos): Likewise.
(gfc_trans_inquire): Likewise.
(NML_FIRST_ARG): Delete.
(NML_ADD_ARG): Delete.
(transfer_namelist_element): Use build_call_expr.
(build_dt): Likewise.
(gfc_trans_dt_end): Likewise.
(transfer_expr): Likewise.
(transfer_array-desc): Likewise.
* trans-decl.c (gfc_generate_function_code): Use build_call_expr.
(gfc_generate_constructors): Likewise.
* trans-intrinsic.c (gfc_conv_intrinsic_ctime): Use build_call_expr.
(gfc_conv_intrinsic_fdate): Likewise.
(gfc_conv_intrinsic_ttynam): Likewise.
(gfc_conv_intrinsic_array_transfer): Likewise.
(gfc_conv_associated): Likewise.
(gfc_conv_intrinsic_si_kind): Likewise.
(gfc_conv_intrinsic_trim): Likewise.
(gfc_conv_intrinsic_repeat: Likewise.
(gfc_conv_intrinsic_iargc): Likewise.
Co-Authored-By: Brooks Moses <brooks.moses@codesourcery.com>
Co-Authored-By: Lee Millward <lee.millward@codesourcery.com>
From-SVN: r122018
2007-01-02 Douglas Gregor <doug.gregor@gmail.com>
* c-common.c(c_common_nodes_and_builtins): Since variants of
void_type_node get built before it is given a name, we need to
give those variants the name, too.
(complete_array_type): We need to work with the canonical main
type of the array, from which we will build the qualified version.
* params.def (PARAM_VERIFY_CANONICAL_TYPES): New.
* print-tree.c (print_node): Display canonical type information
for each type.
* stor-layout.c (layout_type): When we don't know the
alignment of a type for which we're building an array, we end up
guessing wrong, so make the type require structural equality.
* tree.c (make_node_stat): When we build a new type, it is its
own canonical type.
(build_type_attribute_qual_variant): When building an attribute
variant, its canonical type is the non-attribute variant. However,
if the attributes are target-dependent and they differ, we need to
use structural equality checks for this type.
(build_qualified_type): A qualified type is not equivalent to its
unqualified variant; set the canonical type appropriately.
(build_distinct_type_copy): When building a distinct type from
another type, the new type is its own canonical type.
(build_variant_type_copy): When building a new type variant, we
assume that it is equivalent to the original type.
(build_pointer_type_for_mode): When building a pointer type, also
build a canonical type pointer.
(build_reference_type_for_mode): When building a reference type,
also build a canonical type reference.
(build_index_type): When we can't hash an index type (e.g.,
because its maximum value is negative), the index type requires
structural equality tests.
(build_array_type): Build the canonical form of an array type.
(build_function_type): Function types require structural equality,
because they contain default arguments, attributes, etc.
(build_method_type_directly): Ditto for method types.
(build_offset_type): Build the canonical offset type.
(build_complex_type): Build the canonical vector type.
(make_vector_type): Build the canonical vector type.
* tree.h (TYPE_CANONICAL): New.
(TYPE_STRUCTURAL_EQUALITY_P): New.
(SET_TYPE_STRUCTURAL_EQUALITY): New.
(struct tree_type): Added "canonical" field.
* params.h (VERIFY_CANONICAL_TYPES): New.
* doc/c-tree.texi (TYPE_CANONICAL): Document.
(TYPE_STRUCTURAL_EQUALITY_P): Document.
(SET_TYPE_STRUCTURAL_EQUALITY): Document.
* doc/invoke.texi (verify-canonical-types): Document --param
parameter for verifying canonical types.
2007-01-02 Douglas Gregor <doug.gregor@gmail.com>
* typeck.c (structural_comptypes): Renamed from "comptypes".
(comptypes): Use canonical type information to perform fast type
comparison. When VERIFY_CANONICAL_TYPES, verify that the
canonical type comparison returns the same results as we would see
from the current, structural check. Support COMPARE_STRUCTURAL
when we need structural checks.
* decl.c (typename_compare): Fix comment.
(build_typename_type): TYPENAME_TYPE nodes require structural
equality checks, because they resolve different based on the
current class type.
(make_unbound_class_template): UNBOUND_CLASS_TEMPLATE nodes
require structural equality checks (for now).
(build_ptrmemfunc_type): Build the canonical pointer to member
function type.
(compute_array_index_type): Whenever we build a new index type
to represent the size of an array in a template, we need to mark
this index type as requiring structural equality. This goes for
arrays with value-dependent sizes with the current ABI, or all
arrays with ABI-1.
* tree.c (cplus_array_hash): New.
(struct cplus_array_info): New.
(cplus_array_compare): New.
(cplus_array_htab): New.
(build_cplus_array_type_1): Use a hash table to cache the array
types we build. Build the canonical array type for each array
type.
(cp_build_qualified_type_real): When building a cv-qualified array
type, use the hash table of array types and build canonical array
types as necessary.
(bind_template_template_parm): BOUND_TEMPLATE_TEMPLATE_PARM nodes
use structural equality (for now).
* cp-tree.h (COMPARE_STRUCTURAL): New.
* pt.c (canonical_template_parms): New.
(canonical_type_parameter): New.
(process_template_parm): Find the canonical type parameter.
(lookup_template_class): When we have named the primary template
type, set the canonical type for our template class to the primary
template type. If any of the template arguments need structural
equality checks, the template class needs structural equality
checks.
(tsubst): When reducing the level of a template template
parameter, we require structural equality tests for the resulting
parameter because its template parameters have not had their types
canonicalized. When reducing a template type parameter, find the
canonical reduced type parameter.
(any_template_arguments_need_structural_equality_p): New.
2007-01-02 Douglas Gregor <doug.gregor@gmail.com>
* objc-act.c (objc_build_volatilized_type): Keep track of
canonical types.
(objc_get_protocol_qualified_type): Ditto.
From-SVN: r120341
* doc/c-tree.texi: Document new tree codes.
* doc/md.texi: Document new optabs.
* tree-pretty-print.c (dump_generic_node): Handle print of new tree
codes.
* optabs.c (optab_for_tree_code, init_optabs): Handle new optabs.
* optabs.h (optab_index): Add new.
(vec_extract_even_optab, vec_extract_odd_optab,
vec_interleave_high_optab, vec_interleave_low_optab): New optabs.
* genopinit.c (vec_extract_even_optab, vec_extract_odd_optab,
vec_interleave_high_optab, vec_interleave_low_optab): Initialize
new optabs.
* expr.c (expand_expr_real_1): Add implementation for new tree codes.
* tree-vectorizer.c (new_stmt_vec_info): Initialize new fields.
* tree-vectorizer.h (stmt_vec_info): Add new fields for interleaving
along with macros for their access.
* tree-data-ref.h (first_location_in_loop, data_reference): Update
comment.
* tree-vect-analyze.c (toplev.h): Include.
(vect_determine_vectorization_factor): Fix indentation.
(vect_insert_into_interleaving_chain,
vect_update_interleaving_chain, vect_equal_offsets): New functions.
(vect_analyze_data_ref_dependence): Add argument for interleaving
check. Check for interleaving if it's true.
(vect_check_dependences): New function.
(vect_analyze_data_ref_dependences): Call vect_check_dependences for
every ddr. Call vect_analyze_data_ref_dependence with new argument.
(vect_update_misalignment_for_peel): Update for interleaving.
(vect_verify_datarefs_alignment): Check only first data-ref for
interleaving.
(vect_enhance_data_refs_alignment): Update for interleaving. Check
only first data-ref for interleaving.
(vect_analyze_data_ref_access): Check interleaving, update
interleaving data.
(vect_analyze_data_refs): Call compute_data_dependences_for_loop
with different parameters.
* tree.def (VEC_EXTRACT_EVEN_EXPR, VEC_EXTRACT_ODD_EXPR,
VEC_INTERLEAVE_HIGH_EXPR, VEC_INTERLEAVE_LOW_EXPR): New tree codes.
* tree-inline.c (estimate_num_insns_1): Add cases for new codes.
* tree-vect-transform.c (vect_create_addr_base_for_vector_ref):
Update step in case of interleaving.
(vect_strided_store_supported, vect_permute_store_chain): New
functions.
(vectorizable_store): Handle strided stores.
(vect_strided_load_supported, vect_permute_load_chain,
vect_transform_strided_load): New functions.
(vectorizable_load): Handle strided loads.
(vect_transform_stmt): Add argument. Handle strided stores. Check
that vectorized stmt exists for patterns.
(vect_gen_niters_for_prolog_loop): Update calculation for
interleaving.
(vect_transform_loop): Remove stmt_vec_info for strided stores after
whole chain vectorization.
* config/rs6000/altivec.md (UNSPEC_EXTEVEN, UNSPEC_EXTODD,
UNSPEC_INTERHI, UNSPEC_INTERLO): New constants.
(vpkuhum_nomode, vpkuwum_nomode, vec_extract_even<mode>,
vec_extract_odd<mode>, altivec_vmrghsf, altivec_vmrglsf,
vec_interleave_high<mode>, vec_interleave_low<mode>): Implement.
From-SVN: r119088
2006-11-08 Dorit Nuzman <dorit@il.ibm.com>
* tree-vect-analyze.c (vect_mark_relevant, vect_stmt_relevant_p): Take
enum argument instead of bool.
(vect_analyze_operations): Call vectorizable_type_promotion.
* tree-vectorizer.h (type_promotion_vec_info_type): New enum
stmt_vec_info_type value.
(supportable_widening_operation, vectorizable_type_promotion): New
function declarations.
* tree-vect-transform.c (vect_gen_widened_results_half): New function.
(vectorizable_type_promotion): New function.
(vect_transform_stmt): Call vectorizable_type_promotion.
* tree-vect-analyze.c (supportable_widening_operation): New function.
* tree-vect-patterns.c (vect_recog_dot_prod_pattern):
Add implementation.
* tree-vect-generic.c (expand_vector_operations_1): Consider correct
mode.
* tree.def (VEC_WIDEN_MULT_HI_EXPR, VEC_WIDEN_MULT_LO_EXPR):
(VEC_UNPACK_HI_EXPR, VEC_UNPACK_LO_EXPR): New tree-codes.
* tree-inline.c (estimate_num_insns_1): Add cases for above new
tree-codes.
* tree-pretty-print.c (dump_generic_node, op_prio): Likewise.
* expr.c (expand_expr_real_1): Likewise.
* optabs.c (optab_for_tree_code): Likewise.
(init_optabs): Initialize new optabs.
* genopinit.c (vec_widen_umult_hi_optab, vec_widen_smult_hi_optab,
vec_widen_smult_hi_optab, vec_widen_smult_lo_optab,
vec_unpacks_hi_optab, vec_unpacks_lo_optab, vec_unpacku_hi_optab,
vec_unpacku_lo_optab): Initialize new optabs.
* optabs.h (OTI_vec_widen_umult_hi, OTI_vec_widen_umult_lo):
(OTI_vec_widen_smult_h, OTI_vec_widen_smult_lo, OTI_vec_unpacks_hi,
OTI_vec_unpacks_lo, OTI_vec_unpacku_hi, OTI_vec_unpacku_lo): New
optab indices.
(vec_widen_umult_hi_optab, vec_widen_umult_lo_optab):
(vec_widen_smult_hi_optab, vec_widen_smult_lo_optab):
(vec_unpacks_hi_optab, vec_unpacku_hi_optab, vec_unpacks_lo_optab):
(vec_unpacku_lo_optab): New optabs.
* doc/md.texi (vec_unpacks_hi, vec_unpacks_lo, vec_unpacku_hi):
(vec_unpacku_lo, vec_widen_umult_hi, vec_widen_umult_lo):
(vec_widen_smult_hi, vec_widen_smult_lo): New.
* doc/c-tree.texi (VEC_LSHIFT_EXPR, VEC_RSHIFT_EXPR):
(VEC_WIDEN_MULT_HI_EXPR, VEC_WIDEN_MULT_LO_EXPR, VEC_UNPACK_HI_EXPR):
(VEC_UNPACK_LO_EXPR, VEC_PACK_MOD_EXPR, VEC_PACK_SAT_EXPR): New.
* config/rs6000/altivec.md (UNSPEC_VMULWHUB, UNSPEC_VMULWLUB):
(UNSPEC_VMULWHSB, UNSPEC_VMULWLSB, UNSPEC_VMULWHUH, UNSPEC_VMULWLUH):
(UNSPEC_VMULWHSH, UNSPEC_VMULWLSH): New.
(UNSPEC_VPERMSI, UNSPEC_VPERMHI): New.
(vec_vperm_v8hiv4si, vec_vperm_v16qiv8hi): New patterns used to
implement the unsigned unpacking patterns.
(vec_unpacks_hi_v16qi, vec_unpacks_hi_v8hi, vec_unpacks_lo_v16qi):
(vec_unpacks_lo_v8hi): New signed unpacking patterns.
(vec_unpacku_hi_v16qi, vec_unpacku_hi_v8hi, vec_unpacku_lo_v16qi):
(vec_unpacku_lo_v8hi): New unsigned unpacking patterns.
(vec_widen_umult_hi_v16qi, vec_widen_umult_lo_v16qi):
(vec_widen_smult_hi_v16qi, vec_widen_smult_lo_v16qi):
(vec_widen_umult_hi_v8hi, vec_widen_umult_lo_v8hi):
(vec_widen_smult_hi_v8hi, vec_widen_smult_lo_v8hi): New widening
multiplication patterns.
* target.h (builtin_mul_widen_even, builtin_mul_widen_odd): New.
* target-def.h (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN):
(TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): New.
* config/rs6000/rs6000.c (rs6000_builtin_mul_widen_even): New.
(rs6000_builtin_mul_widen_odd): New.
(TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): Defined.
(TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): Defined.
* tree-vectorizer.h (enum vect_relevant): New enum type.
(_stmt_vec_info): Field relevant chaned from bool to enum
vect_relevant.
(STMT_VINFO_RELEVANT_P): Updated.
(STMT_VINFO_RELEVANT): New.
* tree-vectorizer.c (new_stmt_vec_info): Use STMT_VINFO_RELEVANT
instead of STMT_VINFO_RELEVANT_P.
* tree-vect-analyze.c (vect_mark_relevant, vect_stmt_relevant_p):
Replace calls to STMT_VINFO_RELEVANT_P with STMT_VINFO_RELEVANT,
and boolean variable with enum vect_relevant.
(vect_mark_stmts_to_be_vectorized): Likewise + update documentation.
* doc/tm.texi (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): New.
(TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): New.
2006-11-08 Richard Henderson <rth@redhat.com>
* config/i386/sse.md (vec_widen_umult_hi_v8hi,
vec_widen_umult_lo_v8hi): New.
(vec_widen_smult_hi_v4si, vec_widen_smult_lo_v4si,
vec_widen_umult_hi_v4si, vec_widen_umult_lo_v4si): New.
* config/i386/i386.c (ix86_expand_sse_unpack): New.
* config/i386/i386-protos.h (ix86_expand_sse_unpack): New.
* config/i386/sse.md (vec_unpacku_hi_v16qi, vec_unpacks_hi_v16qi,
vec_unpacku_lo_v16qi, vec_unpacks_lo_v16qi, vec_unpacku_hi_v8hi,
vec_unpacks_hi_v8hi, vec_unpacku_lo_v8hi, vec_unpacks_lo_v8hi,
vec_unpacku_hi_v4si, vec_unpacks_hi_v4si, vec_unpacku_lo_v4si,
vec_unpacks_lo_v4si): New.
2006-11-08 Dorit Nuzman <dorit@il.ibm.com>
* tree-vect-transform.c (vectorizable_type_demotion): New function.
(vect_transform_stmt): Add case for type_demotion_vec_info_type.
(vect_analyze_operations): Call vectorizable_type_demotion.
* tree-vectorizer.h (type_demotion_vec_info_type): New enum
stmt_vec_info_type value.
(vectorizable_type_demotion): New function declaration.
* tree-vect-generic.c (expand_vector_operations_1): Consider correct
mode.
* tree.def (VEC_PACK_MOD_EXPR, VEC_PACK_SAT_EXPR): New tree-codes.
* expr.c (expand_expr_real_1): Add case for VEC_PACK_MOD_EXPR and
VEC_PACK_SAT_EXPR.
* tree-iniline.c (estimate_num_insns_1): Likewise.
* tree-pretty-print.c (dump_generic_node, op_prio): Likewise.
* optabs.c (optab_for_tree_code): Likewise.
* optabs.c (expand_binop): In case of vec_pack_*_optabs the mode
compared against the predicate of the result is not 'mode' (the input
to the function) but a mode with half the size of 'mode'.
(init_optab): Initialize new optabs.
* optabs.h (OTI_vec_pack_mod, OTI_vec_pack_ssat, OTI_vec_pack_usat):
New optab indices.
(vec_pack_mod_optab, vec_pack_ssat_optab, vec_pack_usat_optab): New
optabs.
* genopinit.c (vec_pack_mod_optab, vec_pack_ssat_optab):
(vec_pack_usat_optab): Initialize new optabs.
* doc/md.texi (vec_pack_mod, vec_pack_ssat, vec_pack_usat): New.
* config/rs6000/altivec.md (vec_pack_mod_v8hi, vec_pack_mod_v4si): New.
2006-11-08 Richard Henderson <rth@redehat.com>
* config/i386/sse.md (vec_pack_mod_v8hi, vec_pack_mod_v4si):
(vec_pack_mod_v2di, vec_interleave_highv16qi, vec_interleave_lowv16qi):
(vec_interleave_highv8hi, vec_interleave_lowv8hi):
(vec_interleave_highv4si, vec_interleave_lowv4si):
(vec_interleave_highv2di, vec_interleave_lowv2di): New.
2006-11-08 Dorit Nuzman <dorit@il.ibm.com>
* tree-vect-transform.c (vectorizable_reduction): Support multiple
datatypes.
(vect_transform_stmt): Removed redundant code.
2006-11-08 Dorit Nuzman <dorit@il.ibm.com>
* tree-vect-transform.c (vectorizable_operation): Support multiple
datatypes.
2006-11-08 Dorit Nuzman <dorit@il.ibm.com>
* tree-vect-transform.c (vect_align_data_ref): Removed.
(vect_create_data_ref_ptr): Added additional argument - ptr_incr.
Updated function documentation. Return the increment stmt in ptr_incr.
(bump_vector_ptr): New function.
(vect_get_vec_def_for_stmt_copy): New function.
(vect_finish_stmt_generation): Create a stmt_info to newly created
vector stmts.
(vect_setup_realignment): Call vect_create_data_ref_ptr with additional
argument.
(vectorizable_reduction, vectorizable_assignment): Not supported yet if
VF is greater than the number of elements that can fit in one vector
word.
(vectorizable_operation, vectorizable_condition): Likewise.
(vectorizable_store, vectorizable_load): Support the case that the VF
is greater than the number of elements that can fit in one vector word.
(vect_transform_loop): Don't fail in case of multiple data-types.
* tree-vect-analyze.c (vect_determine_vectorization_factor): Don't fail
in case of multiple data-types; the smallest type determines the VF.
(vect_analyze_data_ref_dependence): Don't record datarefs as same_align
if they are of different sizes.
(vect_update_misalignment_for_peel): Compare misalignments in terms of
number of elements rather than number of bytes.
(vect_enhance_data_refs_alignment): Fix/Add dump printouts.
(vect_can_advance_ivs_p): Fix a dump printout
From-SVN: r118577
2006-10-01 Sandra Loosemore <sandra@codesourcery.com>
* gcc/tree.h (DECL_FIELD_OFFSET, DECL_FIELD_BIT_OFFSET): Fix
comments to reflect actual behavior and relationship between
DECL_FIELD_OFFSET, DECL_FIELD_BIT_OFFSET, and DECL_OFFSET_ALIGN.
* gcc/doc/c-tree.texi (Working with declarations): Fix documentation
of FIELD_DECL likewise.
From-SVN: r117352
2005-07-08 Daniel Berlin <dberlin@dberlin.org>
* Makefile.in (TREE_H): Add treestruct.def.
(c-decl.o): Add pointer-set.h
* c-decl.c (diagnose_mismatched_decls): Don't attempt to look at
visibility on regular DECL's.
(merge_decls): Fix the copying of decl nodes of various types for
the new structures. Don't update RTL, section name, weak status,
etc, on DECL's without RTL.
(grokdeclarator): DECL_ARG_TYPE_AS_WRITTEN is gone.
Don't check volatile on non-variable types.
(store_parm_decls_oldstyle): Use pointer_set instead of DECL_WEAK
to check whether we have seen arguments.
* c-objc-common.c (c_tree_printer): Reverse order of tests so that
flag is checked before field (flag is common, field is not).
* dwarf2out.c (decl_ultimate_origin): Only DECL's with
TS_DECL_COMMON could have an origin.
(add_location_or_const_value_attribute): Don't check section name
on non-var/function decls.
(dwarf2out_var_location): Reverse order of tests.
* emit-rtl.c (set_reg_attrs_for_parm): DECL_CHECK is dead, replace
with DECL_WRTL_CHECK.
* expmed.c (make_tree): rtl is now in decl_with_rtl.
* fold-const.c (fold_binary): Don't check weakness on
non-var/function decls.
(tree_expr_nonzero_p): Ditto.
(fold_checksum_tree): Use tree_decl_extra as sizeof
buffer.
* ggc-page.c (extra_order_size_table): Add sizes for
tree_decl_non_common, tree_parm_decl, tree_var_decl, and
tree_field_decl.
* gimplify.c (gimplify_bind_expr): Only set
DECL_SEEN_IN_BIND_EXPR_P on VAR_DECL.
* integrate.c (copy_decl_for_inlining): Don't set RTL on decl's
without RTL.
* langhooks-def.h (LANG_HOOK_INIT_TS): New.
* langhooks.h (init_ts). New langhook.
* passes.c (rest_of_decl_compilation): Reverse order of tests.
* print-tree.c (print_node): Update to only print fields that
exist in the structures the passed decl has.
* toplev.c (wrapup_global_declarations): Don't reset
DECL_DEFER_OUTPUT on DECL's that don't contain it.
* tree-browser.c (browse_tree): DECL_ARG_TYPE_AS_WRITTEN removed.
* tree-inline.c (remap_decl): Ditto.
* tree-outof-ssa.c (create_temp): Reverse order of tests.
* tree-pretty-print.c (print_declaration): Don't print
DECL_REGISTER on things that don't contain it.
* tree-vrp.c (expr_computes_nonzero): Don't check weakness on
non-var/function decls.
* tree.c (tree_contains_struct): New structure.
(init_priority_for_decl): New hashtable.
(tree_int_map): New structure.
(tree_int_map_eq): New function.
(tree_int_map_marked_p): Ditto.
(tree_int_map_hash): Ditto.
(tree_map): Move to tree.h.
(tree_map_eq): Externalize.
(tree_map_hash): Ditto.
(tree_map_marked_p): Ditto.
(init_ttree): Set up tree_contains_struct and call langhook.
(decl_assembler_name): Use DECL_NON_COMMON_CHECK..
(tree_code_size): Update for new structures.
(tree_node_structure): Update for new structures.
(make_node_stat): Don't try to set DECL_IN_SYSTEM_HEADER on decls
without the field.
(copy_node_stat): Copy init priority.
(build_decl_stat): Ditto for visibility.
(ts_enum_names): New.
(tree_contains_struct_check_failed): New function.
(decl_init_priority_lookup): Ditto.
(decl_init_priority_insert): Ditto.
* treestruct.def: New file.
* tree.h (CODE_CONTAINS_STRUCT): New macro.
(CONTAINS_STRUCT_CHECK): Ditto.
(tree_contains_struct_check_failed): New prototype.
(DECL_CHECK): Removed.
(DECL_MINIMAL_CHECK): New.
(DECL_COMMON_CHECK): Ditto.
(DECL_WRTL_CHECK): Ditto.
(DECL_NON_COMMON_CHECK): Ditto.
(DECL_WITH_VIS_CHECK): Ditto.
(VAR_OR_FUNCTION_DECL_P): Ditto
(struct tree_decl_minimal): New structure.
(struct tree_decl_common): Ditto.
(struct tree_decl_with_rtl): Ditto.
(struct tree_decl_with_vis): Ditto.
(struct tree_decl_non_common): Ditto.
(struct tree_field_decl): Ditto.
(struct tree_parm_decl): Ditto.
(struct tree_var_decl): Ditto.
(struct tree_function_decl): Ditto.
(struct tree_const_decl): Ditto.
(struct tree_result_decl): Ditto.
(union tree_node): Add new structures.
* var-tracking.c (track_expr_p): Reverse order of tests.
* doc/c-tree.texi: Add documentation on DECL node internal structure.
2005-07-08 Daniel Berlin <dberlin@dberlin.org>
* utils.c (create_param_decl): DECL_ARG_TYPE_AS_WRITTEN is
removed.
2005-07-08 Daniel Berlin <dberlin@dberlin.org>
* Make-lang.in: Add gt-cp-lang.h.
(cp-lang.o): Ditto.
* class.c (create_vtable_ptr): Stop setting DECL_ASSEMBLER_NAME on
the field.
* config-lang.in: Add cp-lang.c to gtfiles.
* cp-lang.c: Include hashtab.h.
(cp_init_ts): New function.
(LANG_HOOK_INIT_TS): Use macro.
(decl_shadowed_for_var_lookup): New function.
(decl_shadowed_for_var_insert): Ditto.
* cp-tree.h (THUNK_FUNCTION_CHECK): Use decl_common.
(NON_THUNK_FUNCTION_CHECK): Ditto.
(DECL_NAMESPACE_ASSOCIATIONS): Use decl_non_common.
(DECL_INIT_PRIORITY): Ditto.
(DECL_HAS_SHADOWED_FOR_VAR_P): Ditto.
(DECL_SHADOWED_FOR_VAR): Use hashtable.
(SET_DECL_SHADOWED_FOR_VAR): Ditto.
* decl.c (duplicate_decls): Update for new/updated structures.
(poplevel): Use SET_DECL_SHADOWED_FOR_VAR.
* decl2.c (start_static_initialization_or_destruction): Deal with
priority.
* pt.c (tsubst_decl): Check TS_DECL_WRTL before doing
SET_DECL_RTL.
* tree.c (handle_init_priority_attribute): Handle priority.
2005-07-08 Daniel Berlin <dberlin@dberlin.org>
* objc-act.c (objc_push_parm): DECL_ARG_TYPE_AS_WRITTEN is
removed.
* objc-act.h (KEYWORD_ARG_NAME): Use decl_non_common.
(KEYWORD_KEY_NAME): Use decl_minimal.
(METHOD_SEL_NAME): Ditto..
(METHOD_SEL_ARGS): Use decl_non_common.
(METHOD_ADD_ARGS): Ditto.
(METHOD_ADD_ARGS_ELLIPSIS_P): Use decl_common.
(METHOD_DEFINITION): Ditto.
(METHOD_ENCODING): Ditto.
* objc-lang.c: (objc_init_ts): New function.
2005-07-08 Daniel Berlin <dberlin@dberlin.org>
* trans-decl.c (create_function_arglist): DECL_ARG_TYPE_AS_WRITTEN
is removed.
From-SVN: r101799
gcc/ChangeLog:
2004-05-27 Paolo Bonzini <bonzini@gnu.org>
Roger Sayle <roger@eyesopen.com>
PR rtl-optimization/15649
Add LTGT_EXPR and improve pretty-printing of unordered
comparisons.
* c-common.c (c_common_truthvalue_conversion):
Handle LTGT_EXPR.
* c-typeck.c (build_binary_op): Likewise.
* dojump.c (do_jump): Likewise.
* expr.c (expand_expr_real_1, do_store_flag): Likewise.
* predict.c (tree_predict_by_opcode): Likewise.
* real.c (real_compare): Likewise.
* tree-cfg.c (verify_expr): Likewise.
* tree-inline.c (estimate_num_insns_1): Likewise.
* tree-pretty-print.c (dump_generic_node): Likewise.
Handle ORDERED_EXPR, UNORDERED_EXPR.
(op_symbol): Print unordered comparisons differently
than ordered ones.
* tree.def (LTGT_EXPR): New '<' tree code.
* doc/c-tree.texi (Expressions): Document floating-point
comparison nodes.
Fold comparisons between floating point values.
* fold-const.c (enum comparison_code): New, from
#define'd constants. Define compcodes for unordered
comparisons and for invalid transformations.
(invert_tree_comparison): Add "honor_nans" parameter.
(fold_truthop): Revamp to work on floating-point types too.
(comparison_to_compcode): Support unordered comparisons.
Use new enum comparison_code.
(compcode_to_comparison): Likewise.
(combine_compcodes): New function.
(invert_truthvalue): Let invert_tree_comparison decide
whether it is valid to fold the comparison. Fold ORDERED
and UNORDERED even if flag_unsafe_math_optimizations is off,
and the remaining even if flag_unsafe_math_optimizations
is off but we are under -fno-trapping-math.
(fold_relational_const): Integer modes do not honor NaNs.
gcc/testsuite/ChangeLog:
2004-05-27 Paolo Bonzini <bonzini@gnu.org>
* gcc.c-torture/compare-fp-1.c, gcc.c-torture/compare-fp-2.c,
gcc.c-torture/compare-fp-3.c, gcc.c-torture/compare-fp-4.c,
gcc.c-torture/compare-fp-3.x, gcc.c-torture/compare-fp-4.x,
gcc.c-torture/pr15649-1.c: New.
Co-Authored-By: Roger Sayle <roger@eyesopen.com>
From-SVN: r82365
* expr.c (expand_expr): If an ABS_EXPR has a complex type, abort.
* c-typeck.c (build_unary_op): COMPLEX_TYPE is not a valid
typecode for an ABS_EXPR.
* doc/c-tree.texi: Document ABS_EXPR.
From-SVN: r70349
* flags.h (flag_wrapv): New flag controlling overflow semantics.
* toplev.c (flag_wrapv): Declare the variable with default false.
(lang_independent_options): New option "-fwrapv" to set the above.
* fold-const.c (extract_muldiv_1): Disable optimization of (2*x)/2
as x, when signed arithmetic overflow wraps around.
(fold): Optimize "-A - B" as "-B - A" if overflow wraps around.
* loop.c (basic_induction_var): Ignore BIVs that rely on undefined
overflow when flag_wrapv is true.
* java/lang.c (java_init_options): Prescribe wrap-around two's
complement arithmetic overflow by setting flag_wrapv.
* doc/invoke.texi: Document new -fwrapv command line option.
* doc/c-tree.texi: Mention that the overflow semantics of
NEGATE_EXPR, PLUS_EXPR, MINUS_EXPR and MULT_EXPR is dependent
upon both flag_wrapv and flag_trapv.
* gcc.dg/fwrapv-1.c: New test case.
* gcc.dg/fwrapv-2.c: New test case.
* libjava.lang/Overflow.java: New test.
* libjava.lang/Overflow.out: New file.
From-SVN: r67270