This makes the host_shared value available to host makefile
fragments.
It uses this to adjust Darwin's mdynamic-no-pic in the case that
shared host resources are required.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
ChangeLog:
* Makefile.in: Regenerate.
* Makefile.tpl: Make the state of the configured host
shared flag available to makefile fragements.
config/ChangeLog:
* mh-darwin: Require a non-shared host configuration to
enable mdynamic-no-pic where that is supported.
There were two uses for the Darwin host config fragment:
The first is to arrange for targets that support mdynamic-no-pic
to be built with that enabled (since it makes a significant
difference to the compiler performance). We can be more specific
in the application of this, since it only applies to 32b hosts
plus powerpc64-darwin9.
The second was to work around a tool bug where -fno-PIE was not
propagated to the link stage. This second use is redundant,
since the buggy toolchain cannot bootstrap current GCC sources
anyway.
This makes the host fragment more specific and reduces the number
of toolchains for which it is included which reduces clutter in
configure lines.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
config/ChangeLog:
* mh-darwin: Make this specific to handling the
mdynamic-no-pic case.
ChangeLog:
* configure: Regenerate.
* configure.ac: Adjust cases for which it is necessary to
include the Darwin host config fragment.
config
* gettext.m4 (AM_GNU_GETTEXT): Skip checks for the internal
symbols _nl_msg_cat_cntr, _nl_domain_bindings, and
_nl_expand_alias, if __GNU_GETTEXT_SUPPORTED_REVISION is defined.
Backport of gettext serial 68 patch.
Sync with binutils for PR binutils/27397. Check if host supports
multi-byte NOPs before enabling CET on host.
config/
PR bootstrap/99703
* cet.m4 (GCC_CET_HOST_FLAGS): Check if host supports multi-byte
NOPs.
libiberty/
PR bootstrap/99703
* configure: Regenerated.
This is similar to what was done in
eea4e2ff0a (where it was added to
STAGE*_CXXFLAGS), but this adds the flag to the CXXFLAGS and
BOOT_CXXFLAGS variables too (as it's already added to CFLAGS and
BOOT_CFLAGS).
2021-04-09 Martin Storsjö <martin@martin.st>
config/ChangeLog:
* mh-mingw: Set __USE_MINGW_ACCESS in missed C++ flags
variables
With the introduction of C++20 modules and libcody, cc1plus and
cc1objplus gained a dependency on the socket functions. Before those
were merged into libc in Solaris 11.4, one needed to link with -lsocket -lnsl
on Solaris, so that merge broke the Solaris 11.3 build.
While we already have 4 different checks for those libraries in the
tree, I decided to import autoconf-archive's AX_LIB_SOCKET_NSL macro
instead. At the same time, the patch only links libcody and the
networking libs where needed (cc1plus, cc1objplus).
Bootstrapped without regressions on i386-pc-solaris2.11 (Solaris 11.3
and 11.4), sparc-sun-solaris2.11, and x86_64-pc-linux-gnu.
2020-12-16 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
c++tools:
PR c++/98316
* configure.ac: Include ../config/ax_lib_socket_nsl.m4.
(NETLIBS): Determine using AX_LIB_SOCKET_NSL.
* configure: Regenerate.
* Makefile.in (NETLIBS): Define.
(g++-mapper-server$(exeext)): Add $(NETLIBS).
gcc/objcp:
PR c++/98316
* Make-lang.in (cc1objplus$(exeext)): Add $(CODYLIB), $(NETLIBS).
gcc/cp:
PR c++/98316
* Make-lang.in (cc1plus$(exeext)): Add $(CODYLIB), $(NETLIBS).
gcc:
PR c++/98316
* configure.ac (NETLIBS): Determine using AX_LIB_SOCKET_NSL.
* aclocal.m4, configure: Regenerate.
* Makefile.in (NETLIBS): Define.
(BACKEND): Remove $(CODYLIB).
config:
PR c++/98316
* ax_lib_socket_nsl.m4: Import from autoconf-archive.
We use this in the sim tree currently. Rather than require people to
have pkg-config installed, include it in the config/ dir.
config/ChangeLog:
* pkg.m4: New file from pkg-config-0.29.2.
Handling stack variables has three features.
1) Ensure HWASAN required alignment for stack variables
When tagging shadow memory, we need to ensure that each tag granule is
only used by one variable at a time.
This is done by ensuring that each tagged variable is aligned to the tag
granule representation size and also ensure that the end of each
object is aligned to ensure the start of any other data stored on the
stack is in a different granule.
This patch ensures the above by forcing the stack pointer to be aligned
before and after allocating any stack objects. Since we are forcing
alignment we also use `align_local_variable` to ensure this new alignment
is advertised properly through SET_DECL_ALIGN.
2) Put tags into each stack variable pointer
Make sure that every pointer to a stack variable includes a tag of some
sort on it.
The way tagging works is:
1) For every new stack frame, a random tag is generated.
2) A base register is formed from the stack pointer value and this
random tag.
3) References to stack variables are now formed with RTL describing an
offset from this base in both tag and value.
The random tag generation is handled by a backend hook. This hook
decides whether to introduce a random tag or use the stack background
based on the parameter hwasan-random-frame-tag. Using the stack
background is necessary for testing and bootstrap. It is necessary
during bootstrap to avoid breaking the `configure` test program for
determining stack direction.
Using the stack background means that every stack frame has the initial
tag of zero and variables are tagged with incrementing tags from 1,
which also makes debugging a bit easier.
Backend hooks define the size of a tag, the layout of the HWASAN shadow
memory, and handle emitting the code that inserts and extracts tags from a
pointer.
3) For each stack variable, tag and untag the shadow stack on function
prologue and epilogue.
On entry to each function we tag the relevant shadow stack region for
each stack variable. This stack region is tagged to match the tag added to
each pointer to that variable.
This is the first patch where we use the HWASAN shadow space, so we need
to add in the libhwasan initialisation code that creates this shadow
memory region into the binary we produce. This instrumentation is done
in `compile_file`.
When exiting a function we need to ensure the shadow stack for this
function has no remaining tags. Without clearing the shadow stack area
for this stack frame, later function calls could get false positives
when those later function calls check untagged areas (such as parameters
passed on the stack) against a shadow stack area with left-over tag.
Hence we ensure that the entire stack frame is cleared on function exit.
config/ChangeLog:
* bootstrap-hwasan.mk: Disable random frame tags for stack-tagging
during bootstrap.
gcc/ChangeLog:
* asan.c (struct hwasan_stack_var): New.
(hwasan_sanitize_p): New.
(hwasan_sanitize_stack_p): New.
(hwasan_sanitize_allocas_p): New.
(initialize_sanitizer_builtins): Define new builtins.
(ATTR_NOTHROW_LIST): New macro.
(hwasan_current_frame_tag): New.
(hwasan_frame_base): New.
(stack_vars_base_reg_p): New.
(hwasan_maybe_init_frame_base_init): New.
(hwasan_record_stack_var): New.
(hwasan_get_frame_extent): New.
(hwasan_increment_frame_tag): New.
(hwasan_record_frame_init): New.
(hwasan_emit_prologue): New.
(hwasan_emit_untag_frame): New.
(hwasan_finish_file): New.
(hwasan_truncate_to_tag_size): New.
* asan.h (hwasan_record_frame_init): New declaration.
(hwasan_record_stack_var): New declaration.
(hwasan_emit_prologue): New declaration.
(hwasan_emit_untag_frame): New declaration.
(hwasan_get_frame_extent): New declaration.
(hwasan_maybe_enit_frame_base_init): New declaration.
(hwasan_frame_base): New declaration.
(stack_vars_base_reg_p): New declaration.
(hwasan_current_frame_tag): New declaration.
(hwasan_increment_frame_tag): New declaration.
(hwasan_truncate_to_tag_size): New declaration.
(hwasan_finish_file): New declaration.
(hwasan_sanitize_p): New declaration.
(hwasan_sanitize_stack_p): New declaration.
(hwasan_sanitize_allocas_p): New declaration.
(HWASAN_TAG_SIZE): New macro.
(HWASAN_TAG_GRANULE_SIZE): New macro.
(HWASAN_STACK_BACKGROUND): New macro.
* builtin-types.def (BT_FN_VOID_PTR_UINT8_PTRMODE): New.
* builtins.def (DEF_SANITIZER_BUILTIN): Enable for HWASAN.
* cfgexpand.c (align_local_variable): When using hwasan ensure
alignment to tag granule.
(align_frame_offset): New.
(expand_one_stack_var_at): For hwasan use tag offset.
(expand_stack_vars): Record stack objects for hwasan.
(expand_one_stack_var_1): Record stack objects for hwasan.
(init_vars_expansion): Initialise hwasan state.
(expand_used_vars): Emit hwasan prologue and generate hwasan epilogue.
(pass_expand::execute): Emit hwasan base initialization if needed.
* doc/tm.texi (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
* doc/tm.texi.in (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
* explow.c (get_dynamic_stack_base): Take new `base` argument.
* explow.h (get_dynamic_stack_base): Take new `base` argument.
* sanitizer.def (BUILT_IN_HWASAN_INIT): New.
(BUILT_IN_HWASAN_TAG_MEM): New.
* target.def (target_memtag_tag_size,target_memtag_granule_size,
target_memtag_insert_random_tag,target_memtag_add_tag,
target_memtag_set_tag,target_memtag_extract_tag,
target_memtag_untagged_pointer): New hooks.
* targhooks.c (HWASAN_SHIFT): New.
(HWASAN_SHIFT_RTX): New.
(default_memtag_tag_size): New default hook.
(default_memtag_granule_size): New default hook.
(default_memtag_insert_random_tag): New default hook.
(default_memtag_add_tag): New default hook.
(default_memtag_set_tag): New default hook.
(default_memtag_extract_tag): New default hook.
(default_memtag_untagged_pointer): New default hook.
* targhooks.h (default_memtag_tag_size): New default hook.
(default_memtag_granule_size): New default hook.
(default_memtag_insert_random_tag): New default hook.
(default_memtag_add_tag): New default hook.
(default_memtag_set_tag): New default hook.
(default_memtag_extract_tag): New default hook.
(default_memtag_untagged_pointer): New default hook.
* toplev.c (compile_file): Call hwasan_finish_file when finished.
This is an analogous option to --bootstrap-asan to configure. It allows
bootstrapping GCC using HWASAN.
For the same reasons as for ASAN we have to avoid using the HWASAN
sanitizer when compiling libiberty and the lto-plugin.
Also add a function to query whether -fsanitize=hwaddress has been
passed.
ChangeLog:
* configure: Regenerate.
* configure.ac: Add --bootstrap-hwasan option.
config/ChangeLog:
* bootstrap-hwasan.mk: New file.
gcc/ChangeLog:
* doc/install.texi: Document new option.
libiberty/ChangeLog:
* configure: Regenerate.
* configure.ac: Avoid using sanitizer.
lto-plugin/ChangeLog:
* Makefile.am: Avoid using sanitizer.
* Makefile.in: Regenerate.
The following patch improves handling of largefile support with procfs
on 32-bit Solaris. It has already been approved and installed for
binutils-gdb in the thread starting at
[PATCH] Unify Solaris procfs and largefile handling
https://sourceware.org/pipermail/gdb-patches/2020-June/169977.html
I'm syncing the config/largefile.m4 part to gcc now which is the master
for config. Since ACX_LARGEFILE isn't used anywhere in the gcc tree,
I'm installing it as obvious.
2020-09-09 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
config:
* largefile.m4: Sync from binutils-gdb.
config/ChangeLog:
PR bootstrap/96612
* ax_cxx_compile_stdcxx.m4: Add fourth argument to check also
the CXX_FOR_BUILD compiler.
ChangeLog:
PR bootstrap/96612
* configure.ac: Run AX_CXX_COMPILE_STDCXX also for ${build} compiler,
if not the same as ${host}.
* configure: Regenerate.
With --enable-cet, require CET support only for the final GCC build.
Don't enable CET without CET support for non-bootstrap build, in stage1
nor for build support.
config/
PR bootstrap/96202
* cet.m4 (GCC_CET_HOST_FLAGS): Don't enable CET without CET
support in stage1 nor for build support.
gcc/
PR bootstrap/96202
* configure: Regenerated.
libbacktrace/
PR bootstrap/96202
* configure: Regenerated.
libcc1/
PR bootstrap/96202
* configure: Regenerated.
libcpp/
PR bootstrap/96202
* configure: Regenerated.
libdecnumber/
PR bootstrap/96202
* configure: Regenerated.
libiberty/
PR bootstrap/96202
* configure: Regenerated.
lto-plugin/
PR bootstrap/96202
* configure: Regenerated.
There was general agreement last November that we would move to allowing
C++11 features to be used in GCC 11; this patch implements that direction.
ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* configure.ac: Update bootstrap dialect to -std=c++11.
config/ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* ax_cxx_compile_stdcxx.m4: Import from autoconf archive with
an adjustment to try the default mode.
gcc/ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* aclocal.m4: Add ax_cxx_compile_stdcxx.m4.
* configure.ac: Use AX_CXX_COMPILE_STDCXX(11).
Don't perform CET run-time check for host when cross compiling. Instead,
enable CET in cross compiler if possible so that it will run on both CET
and non-CET hosts.
config/
PR bootstrap/94998
* cet.m4 (GCC_CET_HOST_FLAGS): Enable CET in cross compiler if
possible.
libiberty/
PR bootstrap/94998
* configure: Regenerated.
lto-plugin/
PR bootstrap/94998
* configure: Regenerated.
GCC_CET_HOST_FLAGS uses -Wl,-z,ibt,-z,shstk to check if Linux/x86 host
has Intel CET enabled by introducing an Intel CET violation on purpose.
To avoid false positive, check whether -Wl,-z,ibt,-z,shstk works first.
-fcf-protection=none is added to avoid false negative when -fcf-protection
is enabled by default.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): Add -fcf-protection=none to
-Wl,-z,ibt,-z,shstk. Check whether -fcf-protection=none
-Wl,-z,ibt,-z,shstk works first.
libiberty/
PR bootstrap/94739
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* configure: Regenerated.
Since ld is Intel CET enabled on Intel CET enabled host, dlopen fails on
liblto_plugin.so if it isn't Intel CET enabled. Add GCC_CET_HOST_FLAGS
to cet.m4, use it in libiberty and lto-plugin to always enable Intel
CET in liblto_plugin.so on Intel CET enabled host.
On Linux/x86 host, enable Intel CET by default if assembler and compiler
support Intel CET so that the generated liblto_plugin.so can be used on
both CET and non-CET machines. It is an error to disable Intel CET in
liblto_plugin.so on Intel CET enabled host.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): New.
libiberty/
PR bootstrap/94739
* Makefile.in (COMPILE.c): Add @CET_HOST_FLAGS@.
(configure_deps): Add $(srcdir)/../config/cet.m4 and
$(srcdir)/../config/enable.m4.
* aclocal.m4: Include ../config/cet.m4 and ../config/enable.m4.
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* Makefile.am (AM_CFLAGS): Add $(CET_HOST_FLAGS).
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
The following patch provides some further math library fallbacks.
fmaf can be implemented using fma if available, fma and fmal can use
x * y + z as fallback, it is not perfect, but e.g. glibc on various arches
has been using that as fallback for many years,
and copysign/copysignl/fabs/fabsl can be implemented using corresponding
__builtin_* if we make sure that gcc expands it inline instead of using
a library call (these days it is expanded inline on most targets).
2020-04-22 Jakub Jelinek <jakub@redhat.com>
PR libfortran/94694
PR libfortran/94586
* configure.ac: Add math func checks for fmaf, fma and fmal. Add
HAVE_INLINE_BUILTIN_COPYSIGN check.
* c99_protos.h (copysign, fmaf, fma, fmal): Provide fallback
prototypes.
(HAVE_COPYSIGN, HAVE_FMAF, HAVE_FMA, HAVE_FMAL): Define if not
defined and fallback version is provided.
* intrinsics/c99_functions.c (copysign, fmaf, fma, fmal): Provide
fallback implementations if possible
* configure: Regenerated.
* config.h.in: Regenerated.
* math.m4 (GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK1,
GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK2): New.
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
This commit:
commit e7c26e04b2 (tjteru/master)
Date: Wed Jan 22 14:54:26 2020 +0000
gcc: Add new configure options to allow static libraries to be selected
contains a couple of issues. First I failed to correctly regenerate
all of the configure files it should have done. Second, there was a
mistake in lib-link.m4, one of the conditions didn't use pure sh
syntax, I wrote this:
if x$lib_type = xauto || x$lib_type = xshared; then
When I should have written this:
if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
These issues were raised on the mailing list in these messages:
https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01827.htmlhttps://gcc.gnu.org/ml/gcc-patches/2020-01/msg01921.html
config/ChangeLog:
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
gcc/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libcpp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
The motivation behind this change is to make it easier for a user to
link against static libraries on a target where dynamic libraries are
the default library type (for example GNU/Linux).
Further, my motivation is really for linking libraries into GDB,
however, the binutils-gdb/config/ directory is a copy of gcc/config/
so changes for GDB need to be approved by the GCC project first.
After making this change in the gcc/config/ directory I've run
autoreconf on all of the configure scripts in the GCC tree and a
couple have been updated, so I'll use one of these to describe what my
change does.
Consider libcpp, this library links against libiconv. Currently if
the user builds on a system with both static and dynamic libiconv
installed then autotools will pick up the dynamic libiconv by
default. This is almost certainly the right thing to do.
However, if the user wants to link against static libiconv then things
are a little harder, they could remove the dynamic libiconv from their
system, but this is probably a bad idea (other things might depend on
that library), or the user can build their own version of libiconv,
install it into a unique prefix, and then configure gcc using the
--with-libiconv-prefix=DIR flag. This works fine, but is somewhat
annoying, the static library available, I just can't get autotools to
use it.
My change then adds a new flag --with-libiconv-type=TYPE, where type
is either auto, static, or shared. The default auto, ensures we keep
the existing behaviour unchanged.
If the user configures with --with-libiconv-type=static then the
configure script will ignore any dynamic libiconv it finds, and will
only look for a static libiconv, if no static libiconv is found then
the configure will continue as though there is no libiconv at all
available.
Similarly a user can specify --with-libiconv-type=shared and force the
use of shared libiconv, any static libiconv will be ignored.
As I've implemented this change within the AC_LIB_LINKFLAGS_BODY macro
then only libraries configured using the AC_LIB_LINKFLAGS or
AC_LIB_HAVE_LINKFLAGS macros will gain the new configure flag.
If this is accepted into GCC then there will be follow on patches for
binutils and GDB to regenerate some configure scripts in those
projects.
For GCC only two configure scripts needed updated after this commit,
libcpp and libstdc++-v3, both of which link against libiconv.
config/ChangeLog:
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
libcpp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
Although BOOT_CFLAGS can be used to bootstrap with -Og, having a
dedicated build config is sometimes more convenient.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
config/
* bootstrap-Og.mk: New file.
gcc/
* doc/install.texi (bootstrap-Og): Document.
From-SVN: r273193
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Regenerate.
* Makefile.tpl: Pass GENERATOR_CFLAGS
in all stages.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Use GENERATOR_CFLAGS for all generators.
* doc/install.texi: Document the new config.
From-SVN: r270223
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
