2010-03-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/43265
* io/read.c: Include fbuf.h and unix.h to enable lower level I/O for
read_x. (read_x): Replace the use of read_sf with equivalent lower level
I/O, eliminating unneeded code and handling EOF and EOR conditions.
* io/io.h: Revise prototype for read_sf.
* io/transfer.c (read_sf): Delete no_error parameter and all uses of it.
(read_block_form): Likewise.
(next_record_r): Delete wrong code call to hit_eof.
From-SVN: r157310
2010-02-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (require_type): Subtract one from item_count for output
of error message. Add comment before formatted_transfer function
explaining why the item_count is off by one.
From-SVN: r157060
2010-02-06 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran
* io/transfer.c (read_sf): Handle EOR and EOF conditions for
ADVANCE="no" with PAD="yes" or PAD="no".
From-SVN: r156540
2009-11-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/42090
* io/transfer.c (skip_record): Set bytes_left_subrecord to zero after
skipping the remaining bytes in the record.
(next_record_r): Call skip_record with the number of bytes_left to be
skipped.
From-SVN: r154316
2009-09-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/35862
* io.h (gfc_unit): Add round_status.
(format_token): Add enumerators for rounding format specifiers.
* transfer.c (round_opt): New options table.
(formatted_transfer_scalar_read): Add set round_status for each rounding
format token. (formatted_transfer_scalar_write): Likewise.
* format.c (format_lex): Tokenize the rounding format specifiers.
(parse_format_list): Parse the rounding format specifiers.
* write_float.def (outout_float): Modify rounding code to use new
variable rchar to set the appropriate rounding. Fix some whitespace.
* unit.c (get_internal_unit): Initialize rounding mode for internal
units. (init_units): Likewise.
From-SVN: r152263
2009-09-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/41328
* io/transfer.c (read_sf): Set at_eof flag on short read if any
characters were successfully read so that EOF condition with no EOR
marker succeeds.
From-SVN: r151877
2009-09-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/41328
* io/transfer.c (read_sf): Adjust fbuf position and do proper
fbuf reads to traverse CR, CR-LF, and LF style line ends.
From-SVN: r151665
2009-07-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/40330
PR libfortran/40662
* io/io.h (st_parameter_dt): Define format_not_saved bit used to signal
whether the parsed format data was previously saved. Used to determine
if the current format data should be freed or not.
* io/transfer.c (st_read_done): Use the format_not_saved bit.
(st_write_done): Likewise.
* io/format.c (parse_format_list): Add boolean pointer to arg list. This
pointer is used to return status to the caller regarding whether it is
safe to cache the parsed format data. Currently, if a FMT_STRING token
is encounetered, it is not safe to cache. Also, added a local boolean
variable to hold this information as recursive calls to
parse_format_list are made. Remove previous save_format logic.
(parse_format): Do not use the format caching facility if the current
unit is an internal unit or if it is not safe to save parsed format
data.
From-SVN: r149398
2009-06-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/40008
* libgfortran.h: Define IOPARM_OPEN_HAS_NEWUNIT.
* io/open.c (st_open): Don't error on negative unit number if NEWUNIT
was specified. If NEWUNIT is specified, call new function to get the
unique unit number and assign it.
* io/io.h (st_parameter_open): Add pointer to newunit. Add prototype for
next_available_newunit. Add prototype for new function,
get_unique_unit_number.
* io/unit.c: Declare next_available_newunit. Define the first newunit
number. (init_units): Initialize next_available_unit.
(get_unique_unit_number): New function. Fix whitespace and comments.
* io/transfer.c (data_transfer_init): Update error message to not be
specific to OPEN statements.
From-SVN: r148253
2009-04-05 Daniel Kraft <d@domob.eu>
PR fortran/38654
* io/read.c (read_f): Reworked to speed up floating point parsing.
(convert_real): Use pointer-casting instead of memcpy and temporaries.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/io.h (format_hash_entry): New structure for hash table.
(format_hash_table): The hash table itself.
(free_format_data): Revise function prototype.
(free_format_hash_table, init_format_hash,
free_format_hash): New function prototypes.
* io/unit.c (close_unit_1): Use free_format_hash_table.
* io/transfer.c (st_read_done, st_write_done): Free format data if
internal unit.
* io/format.c (free_format_hash_table): New function that frees any
memory allocated previously for cached format data.
(reset_node): New static helper function to reset the format counters
for a format node.
(reset_fnode_counters): New static function recursively calls reset_node
to traverse the fnode tree.
(format_hash): New simple hash function based on XOR, probabalistic,
tosses collisions.
(save_parsed_format): New static function to save the parsed format
data to use again.
(find_parsed_format): New static function searches the hash table
looking for a match.
(free_format_data): Revised to accept pointer to format data rather than
the dtp pointer so that the function can be used in more places.
(format_lex): Editorial.
(parse_format_list): Set flag used to determine of format data hashing
is to be used. Internal units are not persistent enough for this.
(revert): Move to ne location in file.
(parse_format): Use new functions to look for previously parsed
format strings and use them rather than re-parse. If not found, saves
the parsed format data for later use.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/transfer.c (formatted_transfer_scalar): Remove this function by
factoring it into two new functions, one for read and one for write,
eliminating all the conditionals for read or write mode.
(formatted transfer_scalar_read): New function.
(formatted transfer_scalar_write): New function.
(formatted_transfer): Use new functions.
2009-04-05 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
From-SVN: r145571
2009-03-22 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
[[Split portion of a mixed commit.]]
From-SVN: r144993.2
2008-12-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38398
* io/io.h (st_parameter_dt): Add new bit to keep track of when to
suppress blanks for g0 formatting.
* io/transfer.c (formatted_transfer_scalar): Always call write_real_g0
for g0 formatting.
* io.c (write.c): Do not use ES formatting and use new bit to suppress
blanks.
* io/write_float.def (output_float): Adjust the location of setting the
width so that it can be adjusted when suppressing blanks. Set number of
blanks to zero when dtp->u.p.g0_no_blanks is set. Do some minor code
clean-up and add some white space for readability.
From-SVN: r142871
2008-12-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38430
* io/transfer.c (data_transfer_init): Move constraint check for REC=
and STREAM access into condition for other REC= constraints to simplify.
Comment out this constraint to avoid breaking compatibility with 4.3
until later. Added a TODO for above comment and this one.
Fix test for max pos.
From-SVN: r142575
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/38291
* io.c (match_dt_element): Use dt->pos in matcher.
(gfc_free_dt): Free dt->pos after use.
(gfc_resolve_dt): Use dt->pos in resolution of stream position tag.
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38291
* io/transfer.c (data_transfer_init): Add checks for POS= valid range.
Add check for unit opened with ACCESS="stream". Flush and seek if
current stream position does not match. Check ENDFILE on read.
From-SVN: r142515
PR libfortran/37839
* trans-io.c (gfc_build_io_library_fndecls): Decrease pad size back
to 16 pointers plus 32 integers. Don't use max integer kind
alignment, only gfc_intio_kind's alignment.
(gfc_trans_inquire): Only set flags2 if mask2 is non-zero.
* ioparm.def: Fix order, bitmasks and types of inquire round, sign
and pending fields. Move u in dt before id.
* io.c (gfc_free_inquire): Free decimal and size exprs.
(match_inquire_element): Match size instead of matching blank twice.
(gfc_resolve_inquire): Resolve size.
* gfortran.dg/f2003_inquire_1.f03: New test.
* gfortran.dg/f2003_io_1.f03: Remove xfail.
* gfortran.dg/f2003_io_4.f03: Likewise.
* gfortran.dg/f2003_io_5.f03: Likewise.
* gfortran.dg/f2003_io_6.f03: Likewise.
* gfortran.dg/f2003_io_7.f03: Likewise.
* io/io.h (IOPARM_INQUIRE_HAS_ROUND, IOPARM_INQUIRE_HAS_SIGN,
IOPARM_INQUIRE_HAS_PENDING): Adjust values.
(st_parameter_inquire): Reorder and fix types of round, sign and
pending fields.
(st_parameter_43, st_parameter_44): Removed.
(st_parameter_dt): Put back struct definition directly to u.p
declaration. Change type of u.p.size_used from gfc_offset to
GFC_IO_INT. Decrease back size of u.pad to 16 pointers and
32 ints. Put id, pos, asynchronous, blank, decimal, delim,
pad, round and sign fields after the union.
* io/inquire.c (inquire_via_unit, inquire_via_filename): Only read
flags2 if it is defined.
* io/transfer.c (read_sf, read_block_form, write_block): Cast
additions to size_used to GFC_IO_INT instead of gfc_offset.
(data_transfer_init): Clear whole u.p struct. Adjust
for moving id, pos, asynchronous, blank, decimal, delim, pad,
round and sign fields from u.p directly into st_parameter_dt.
(finalize_transfer): Don't cast size_used to GFC_IO_INT.
* io/file_pos.c (st_endfile): Clear whole u.p struct.
From-SVN: r142111
2008-10-16 Thomas Koenig <tkoenig@gcc.gnu.org>
* io/file_pos.c (unformatted_backspace): Normal case is
GFC_CONVERT_NATIVE.
* io/transfer.c (read_sf): Mark paths leading to generate_error()
as unlikely.
(readl_block_form): Likewise.
(read_block_direct): Likewise.
(write_block): Likewise.
(write_buf): Likewise.
(us_read): Likewise. Normal case is GFC_CONVERT_NATIVE.
(next_record_w_unf): Mark paths leading to generate_error()
as unlikely.
From-SVN: r141179
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* io/transfer.c (unformatted_read): CONVERT_NATIVE
is the usual case. Check for kind==1 for non-byte-reversing
operation.
(unformatted_write): Likewise.
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* gfortran.dg/convert_2.f90: New test case.
From-SVN: r141008
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR fortran/37498
* trans-io.c (gfc_build_io_library_fndecls): Bump pad size.
(build_dt): Set mask bit for IOPARM_dt_f2003.
* ioparm.def: Add IOPARM_dt_f2003.
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37498
* file_pos (st_endfile): Clear memory only for libfortran 4.3 private
area.
* list_read.c (eat_separator): Only access F2003 I/O parameters if
IOPARM_DT_HAS_F2003 bit is set. (parse_real): Ditto.
(read_real): Ditto.
* read.c (read_a): Likewise. (read_a_char4): Likewise though not
strictly necessary. (read_f): Likewise.
* io.h (unit_sign_s): New enumerator to allow duplication of
st_parameter structures. (IOPARM_DT_HAS_F2003): New mask bit.
(st_parameter_43): New structure copied from 4.3 version of
st_paramater_dt private section. (st_parameter_44): New structure with
F2003 items added. (st_parameter_dt): Modified to create union of new
and old structures to allow correct memory setting for 4.3 ABI
compatibility. Bumped the pad size.
* transfer.c (read_sf): Do not use F2003 I/O memory areas unless
IOPARM_DT_HAS_F2003 bit has been set. (read_block_form): Ditto.
(formatted_transfer_scalar): Ditto. (data_transfer_init): Ditto and
add comment, fix formatting.
* write.c (write_default_char4): Likewise though not strictly necessary.
(write_utf8_char4): Ditto. (write_character): Ditto.
(write_real_g0): Ditto. (list_formatted_write_scalar): Ditto.
(nml_write_obj): Ditto. (namelist_write): Ditto.
* write_float.def (calculate_sign): Eliminate warning by including all
cases in switch. (output_float): Output only decimal point of F2003 flag
is not set.
From-SVN: r140576
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* io.c (check_format): Allow specifying precision with g0 format.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37301
PR libfortran/37228
* io/io.h (write_real_g0): Declare new function to handle g0.d format.
* io/transfer.c (formatted_transfer_scalar): Use new function.
* io/format.c (parse_format_list): Enable g0.d.
* io/write.c (write_a_char4): Delete unused var.
(set_fnode_default): New function to set the default fnode w, d, and e
factored from write_real. (write_real): Use new factored function.
(write_real_g0): New function that sets d to that passed by g0.d format
specifier and set format to ES. Default values for w and e are used
from the new function, set_fnode_default.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* gfortran.dg/fmt_g0_4.f08: Revised test.
From-SVN: r139886
2008-06-13 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/35863
* libgfortran.h: Change l8_to_l4_offset to big_endian and add endian_off.
* runtime/main.c: Fix error in comment. Change l8_to_l4_offset to
big_endian. (determine_endianness): Add endian_off and set its value
according to big_endian.
* gfortran.map: Add symbol for new _gfortran_transfer_character_wide.
* io/io.h: Add prototype declarations for new functions.
* io/list_read.c (list_formatted_read_scalar): Modify to handle kind=4.
(list_formatted_read): Calculate stride based on kind for character type
and use it when calling list_formatted_read_scalar.
* io/inquire.c (inquire_via_unit): Change l8_to_l4_offset to big_endian.
* io/open.c (st_open): Change l8_to_l4_offset to big_endian.
* io/read.c (read_a_char4): New function to handle formatted read.
* io/write.c: Define GFC_CHAR4(x) to improve readability of code.
(write_a_char4): New function to handle formatted write.
(write_character): Modify to accept the kind parameter and adjust for
endianess of the machine. (list_formatted_write): Calculate the stride
resulting from the kind and adjust the list_formatted_write_scalar call
accordingly. (nml_write_obj): Adjust calls to write_character.
(namelist_write): Likewise.
* io/transfer.c (formatted_transfer_scaler): Rename 'len' argument to
'kind' argument to better describe what it is. Add calls to new
functions for kind == 4. (formatted_transfer): Modify to handle the case
of type character and kind equals 4 to pass in the kind to the transfer
routines. (transfer_character_wide): Add this new function.
(transfer_array): Don't set kind to the character string length. Adjust
strides bases on character kind.
(unformatted_read): Adjust size based on kind for character types.
(unformatted_write): Likewise. (data_transfer_init): Change
l8_to_l4_offset to big_endian.
From-SVN: r136763
2008-06-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36420
PR libfortran/36421
PR libfortran/36422
* io/io.h: Add prototype for write_real.
* io/transfer.c (formatted_transfer_scalar): For FMT_G and width zero,
use write_real.
* io/format.c: Add zero width error message. (parse_format_list): Use
error message for FMT_A if followed by FMT_ZERO. Use zero width error
message for FMT_G if mode is READ or if -std=f95 or f2003. (fmormat0):
Fix typo in comment.
* io/write.c (write_a): Set wlen to len if FMT_G and length is zero.
(write_l): Add wlen variable and use it if FMT_G and width is zero.
(write_decimal): If FMT_G, set m to -1 to flag processor dependent
formatting. (write_real): Remove static declaration.
From-SVN: r136545
2008-04-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* io/open.c (edit_modes): Set flags.async. (new_unit) Set flags.async
and flags.status. (st_open): Initialize flags.async.
* io/list_read.c (read_charactor): Use delim_status instead of
flags.delim.
* io/read.c (read_x): Use pad_status instead of flags.pad.
* io/inquire.c (inquire_via_unit): Add new checks.
(inquire_via_filename): Likewise.
* io/io.h (st_parameter_inquire): Add new flags.
(st_parameter_dt): Likewise.
* io/unit.c (get_internal_unit): Set flags.async. (init_units): Set
flags.async.
* io/transfer.c: Add delim and pad option arrays. (read_sf): Use
pad_status instead of flags.pad. (read_block): Likewise.
(data_transfer_init): Set flags.async and add checks.
* io/write.c (write_character): Use delim_status.
(list_formatted_write_scalar): Likewise. (nml_write_obj): Likewise.
(namelist_write): Likewise.
From-SVN: r133988
2008-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* gfortran.map: Add new symbol, _gfortran_st_wait.
* libgfortran.h (st_paramter_common): Add new I/O parameters.
* open.c (st_option decimal_opt[], st_option encoding_opt[],
st_option round_opt[], st_option sign_opt[], st_option async_opt[]): New
parameter option arrays. (edit_modes): Add checks for new parameters.
(new_unit): Likewise. (st_open): Likewise.
* list_read.c (CASE_SEPERATORS): Add ';' as a valid separator.
(eat_separator): Handle deimal comma. (read_logical): Fix whitespace.
(parse_real): Handle decimal comma. (read_real): Handle decimal comma.
* read.c (read_a): Use decimal status flag to allow comma in place of a
decimal point. (read_f): Allow comma as acceptable character in float.
According to decimal flag, substitute a period for a comma.
(read_x): If decimal status flag is comma, disable the read_comma flag,
not allowing comma as a delimiter, an extension otherwise.
* io.h: (unit_decimal, unit_encoding, unit_round, unit_sign,
unit_async): New enumerators. Add all new I/O parameters.
* unix.c (unix_stream, int_stream): Add io_mode asychronous I/O control.
(move_pos_offset, fd_alloc_w_at): Fix some whitespace.
(fd_sfree): Use new enumerator. (fd_read): Likewise.
(fd_write): Likewise. (fd_close): Fix whitespace.
(fd_open): Use new enumertors. (tempfile, regular_file,
open_external): Fix whitespace. (output_stream, error_stream): Set
method. (stream_offset): Fix whitespace.
* transfer.c: (st_option decimal_opt[], sign_opt[], blank_opt[]): New
option arrays. (formatted_transfer_scalar): Set sf_read_comma flag
based on new decimal_status flag. (data_transfer_init): Initialize new
parameters. Add checks for decimal, sign, and blank. (st_wait): New stub.
* format.c: (format_lex): Add format specifiers DP, DC, and D.
(parse_format_list): Parse the new specifiers.
* write.c (write_decimal): Use new sign enumerators to set the sign.
(write_complex): Handle decimal comma and semi-colon separator.
(nml_write_obj): Likewise.
* write_float.def: Revise sign enumerators. (calculate_sign): Use new
sign enumerators. (output_float): Likewise. Use new decimal_status flag
to set the decimal character to a point or a comma.
From-SVN: r133943
2008-03-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35699
* io/transfer.c (write_buf): Don't pad the record, just return if the
data is NULL. (next_record_w): If there are bytes left in the record
for unformatted direct I/O, pad out the record with zero bytes.
From-SVN: r133699
2008-03-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35632
* io/transfer.c (data_transfer_init): Fix whitespace.
(next_record_w): Truncate the file only if the stream
position is short of the file end.
From-SVN: r133454
2008-02-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35132
* io/transfer.c (next_record_w): Truncate after the last record for
STREAM I/O.
PR libfortran/34954
* io/transfer.c (data_transfer_init): Initialize dtp->rec if writing.
PR libfortran/34974
* io/transfer.c (formatted_transfer_scalar): Flush the buffer if skips
is less than zero. (next_record_w): Use sseek to position the file to
the max position reached.
From-SVN: r132512
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* io/transfer.c (next_record_w): Always move to the farthest
position when completing the record (also when we are
processing a slash edit descriptor).
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* gfortran.dg/x_slash_2.f: New test.
From-SVN: r131864
2008-01-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34876
* io/transfer.c (write_buf): Handle case of zero sized array.
(transfer_array): Set data pointer to NULL and size to zero. Then
make a data transfer and return.
From-SVN: r131848
2008-01-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (formatted_transfer_scalar): Set max_pos to the greater
of the current max_pos or the newly calculated position.
From-SVN: r131640
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* io/io.h: Adjust protoypes for open_internal(),
next_array_record() and init_loop_spec().
* io/list_read.c (next_char): Use argument "finished"
of next_array_record to check for end on internal file.
* io/unit.c: Calculate the offset for an array
internal file and supply this informatin to open_internal().
* io/unix.c (open_internal): Set the offset for the internal
file on open.
* io/transfer.c (init_loop_spec): Calculate the starting
record in case of negative strides. Return size of 0 for
an empty array.
(next_array_record): Use an extra flag to signal that the
array is finished.
(next_record_r): Use the new flag to next_array_record().
(next_record_w): Likewise.
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* gfortran.dg/internal_readwrite_1.f90: New test.
* gfortran.dg/internal_readwrite_2.f90: New test.
From-SVN: r131305
2007-12-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (read_sf): Check if readlen was less than the requested
number of bytes to read and if so, generate error.
From-SVN: r131177
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* io/io.h: Add previous_nonadvancing_write to gfc_unit.
Add prototype for finish_last_advance_record.
* io/file_pos.c (st_backspace): Generate error if backspace is
attempted for direct access or unformatted stream.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the backspace.
(st_endfile): Generate error if endfile is attempted for
direct access.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the endfile.
(st_rewind): Generate error if rewind is attempted for
direct access.
* unit.c (close_unit_1): Move functionality to write
previously written bytes to...
(finish_last_advance_record): ... here.
* transfer.c (data_transfer_init): If reading, reset
previous_nonadvancing_write.
(finalize_transfer): Set the previous_noadvancing_write
flag if we are writing and ADVANCE="no" was specified.
Only call next_record() if advance="no" wasn't specified.
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* gfortran.dg/advance_6.f90: New test case.
* gfortran.dg/direct_io_7.f90: New test case.
* gfortran.dg/streamio_13.f90: New test case.
From-SVN: r130912