These destructors are noexcept anyway. I removed the redundant noexcept
from the error_category destructor's declaration in r0-123475, but
didn't remove it from the defaulted definition in system_error.cc. That
causes warnings if the library is built with Clang.
This removes the redundant noexcept from ~error_category and
~system_error and adds tests to ensure they really are noexcept.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* src/c++11/system_error.cc (error_category::~error_category()):
Remove noexcept-specifier.
(system_error::~system_error()): Likewise.
* testsuite/19_diagnostics/error_category/noexcept.cc: New test.
* testsuite/19_diagnostics/system_error/noexcept.cc: New test.
This adds a missing return statement to the non-futex wait-until
operation.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/102074
* include/bits/atomic_timed_wait.h (__timed_waiter_pool)
[!_GLIBCXX_HAVE_PLATFORM_TIMED_WAIT]: Add missing return.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/experimental/internet (__make_resolver_error_code):
Handle EAI_SYSTEM errors.
(basic_resolver_results): Use __make_resolver_error_code. Use
Glibc NI_MAXHOST and NI_MAXSERV values for buffer sizes.
Solaris 11 does not have "http" in /etc/services, which causes this test
to fail. Try some other services until we find one that works.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* testsuite/experimental/net/internet/resolver/ops/lookup.cc:
Try other service if "http" fails.
My apologies for the inconvenience. My recent patch to preserve
SUBREG_PROMOTED_VAR_P on (extend:HI (subreg/s:QI (reg:SI))), and other
places in the middle-end, has broken the build on several targets.
The change to convert_modes inadvertently used the same
subreg_promoted_mode idiom for retrieving the mode of a SUBREG_REG
as the existing code just a few lines earlier. Alas in the meantime,
the original SUBREG gets replaced by one without SUBREG_PROMOTED_VAR_P,
the whole raison-d'etre for my patch, and I'd not realized/noticed
that subreg_promoted_mode asserts for this. Alas neither the bootstrap
and regression test on x86_64-pc-linux-gnu nor my testing on nvptx-none
must have hit this particular case. The logic of this transformation
is sound, it's the implementation that's bitten me.
This patch has been committed, after another "make bootstrap" on
x86_64-pc-linux-gnu (just in case), and confirmation/pre-approval
from Jeff Law that this indeed fixes the build failures seen on
several platforms.
My humble apologies again.
2021-08-31 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* expr.c (convert_modes): Don't use subreg_promoted_mode on a
SUBREG if it can't be guaranteed to a SUBREG_PROMOTED_VAR_P set.
Instead use the standard (safer) is_a <scalar_int_mode> idiom.
Another place we can use iloc_sentinel instead of explicitly saving and
restoring input_location.
gcc/cp/ChangeLog:
* constexpr.c (explain_invalid_constexpr_fn): Use iloc_sentinel.
The compiler tries to limit error cascades in limit_bad_template_recursion
by avoiding triggering a new instantiation from one that has caused errors.
We were exempting constexpr functions from this because they can be needed
for constant evaluation, but as more and more functions get marked
constexpr, this becomes an over-broad category. So as suggested on IRC,
this patch only exempts functions that are needed for mandatory constant
evaluation.
As noted in the comment, this flag doesn't particularly need to use a bit in
the FUNCTION_DECL, but there were still some free.
PR c++/92193
gcc/cp/ChangeLog:
* cp-tree.h (FNDECL_MANIFESTLY_CONST_EVALUATED): New.
* constexpr.c (cxx_eval_call_expression): Set it.
* pt.c (neglectable_inst_p): Check it.
gcc/testsuite/ChangeLog:
* g++.dg/diagnostic/static_assert4.C: New test.
I'm getting:
FAIL: gcc.dg/vect/pr101145.c scan-tree-dump-times vect "vectorized 1 loops" 7
FAIL: gcc.dg/vect/pr101145_1.c scan-tree-dump-times vect "vectorized 1 loops" 2
FAIL: gcc.dg/vect/pr101145_2.c scan-tree-dump-times vect "vectorized 1 loops" 2
FAIL: gcc.dg/vect/pr101145_3.c scan-tree-dump-times vect "vectorized 1 loops" 2
FAIL: gcc.dg/vect/pr101145.c -flto -ffat-lto-objects scan-tree-dump-times vect "vectorized 1 loops" 7
FAIL: gcc.dg/vect/pr101145_1.c -flto -ffat-lto-objects scan-tree-dump-times vect "vectorized 1 loops" 2
FAIL: gcc.dg/vect/pr101145_2.c -flto -ffat-lto-objects scan-tree-dump-times vect "vectorized 1 loops" 2
FAIL: gcc.dg/vect/pr101145_3.c -flto -ffat-lto-objects scan-tree-dump-times vect "vectorized 1 loops" 2
on i686-linux (or x86_64-linux with -m32/-mno-sse).
The problem is that those tests use dg-options, which in */vect/ testsuite
throws away all the carefully added default options to enable vectorization
on each target (and which e.g. vect_int etc. effective targets rely on).
The old way would be to name those tests gcc.dg/vect/O3-pr101145*,
but we can also use dg-additional-options (which doesn't throw the default
options, just appends to them) which is IMO better so that we don't have to
rename the tests.
2021-08-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/101145
* gcc.dg/vect/pr101145.c: Use dg-additional-options with just -O3
instead of dg-options with -O3 -fdump-tree-vect-details.
* gcc.dg/vect/pr101145_1.c: Likewise.
* gcc.dg/vect/pr101145_2.c: Likewise.
* gcc.dg/vect/pr101145_3.c: Likewise.
'device_num' and 'ancestor' are now parsed on target device constructs for C,
C++, and Fortran (see OpenMP specification 5.0, p. 170). When 'ancestor' is
used, then 'sorry, not supported' is output. Moreover, the restrictions for
'ancestor' are implemented (see OpenMP specification 5.0, p. 174f).
gcc/c/ChangeLog:
* c-parser.c (c_parser_omp_clause_device): Parse device-modifiers 'device_num'
and 'ancestor' in 'target device' clauses.
gcc/cp/ChangeLog:
* parser.c (cp_parser_omp_clause_device): Parse device-modifiers 'device_num'
and 'ancestor' in 'target device' clauses.
* semantics.c (finish_omp_clauses): Error handling. Constant device ids must
evaluate to '1' if 'ancestor' is used.
gcc/fortran/ChangeLog:
* gfortran.h: Add variable for 'ancestor' in struct gfc_omp_clauses.
* openmp.c (gfc_match_omp_clauses): Parse device-modifiers 'device_num'
and 'ancestor' in 'target device' clauses.
* trans-openmp.c (gfc_trans_omp_clauses): Set OMP_CLAUSE_DEVICE_ANCESTOR.
gcc/ChangeLog:
* gimplify.c (gimplify_scan_omp_clauses): Error handling. 'ancestor' only
allowed on target constructs and only with particular other clauses.
* omp-expand.c (expand_omp_target): Output of 'sorry, not supported' if
'ancestor' is used.
* omp-low.c (check_omp_nesting_restrictions): Error handling. No nested OpenMP
structs when 'ancestor' is used.
(scan_omp_1_stmt): No usage of OpenMP runtime routines in a target region when
'ancestor' is used.
* tree-pretty-print.c (dump_omp_clause): Append 'ancestor'.
* tree.h (OMP_CLAUSE_DEVICE_ANCESTOR): Define macro.
gcc/testsuite/ChangeLog:
* c-c++-common/gomp/target-device-1.c: New test.
* c-c++-common/gomp/target-device-2.c: New test.
* c-c++-common/gomp/target-device-ancestor-1.c: New test.
* c-c++-common/gomp/target-device-ancestor-2.c: New test.
* c-c++-common/gomp/target-device-ancestor-3.c: New test.
* c-c++-common/gomp/target-device-ancestor-4.c: New test.
* gfortran.dg/gomp/target-device-1.f90: New test.
* gfortran.dg/gomp/target-device-2.f90: New test.
* gfortran.dg/gomp/target-device-ancestor-1.f90: New test.
* gfortran.dg/gomp/target-device-ancestor-2.f90: New test.
* gfortran.dg/gomp/target-device-ancestor-3.f90: New test.
* gfortran.dg/gomp/target-device-ancestor-4.f90: New test.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* testsuite/17_intro/names.cc: Undefine some more names used
by Solaris system headers.
SUBREG_PROMOTED_VAR_P is a mechanism for tracking that a partial subreg
is correctly zero-extended or sign-extended in the parent register. For
example, the RTL (subreg/s/v:QI (reg/v:SI 23 [ x ]) 0) indicates that the
byte x is zero extended in reg:SI 23, which is useful for optimization.
An example is that zero extending the above QImode value to HImode can
simply use a wider subreg, i.e. (subreg:HI (reg/v:SI 23 [ x ]) 0).
This patch addresses the oversight/missed optimization opportunity that
the new HImode subreg above should retain its SUBREG_PROMOTED_VAR_P
annotation as its value is guaranteed to be correctly extended in the
SImode parent. The code below to preserve SUBREG_PROMOTED_VAR_P is already
present in the middle-end (e.g. simplify-rtx.c:7232-7242) but missing
from one or two (precisely three) places that (accidentally) strip it.
Whilst there I also added another optimization. If we need to extend
the above QImode value beyond the SImode register holding it, say to
DImode, we can eliminate the SUBREG and simply extend from the SImode
register to DImode.
2021-08-31 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* expr.c (convert_modes): Preserve SUBREG_PROMOTED_VAR_P when
creating a (wider) partial subreg from a SUBREG_PROMOTED_VAR_P
subreg.
* simplify-rtx.c (simplify_unary_operation_1) [SIGN_EXTEND]:
Likewise, preserve SUBREG_PROMOTED_VAR_P when creating a (wider)
partial subreg from a SUBREG_PROMOTED_VAR_P subreg. Generate
SIGN_EXTEND of the SUBREG_REG when a subreg would be paradoxical.
[ZERO_EXTEND]: Likewise, preserve SUBREG_PROMOTED_VAR_P when
creating a (wider) partial subreg from a SUBREG_PROMOTED_VAR_P
subreg. Generate ZERO_EXTEND of the SUBREG_REG when a subreg
would be paradoxical.
As recently remarked by Jeff Law, SUBREGs are the "forever chemicals"
of GCC's RTL; once created they persist in the environment. The problem,
according to the comment on lines 5428-5438 of combine.c is that
non-tieable SUBREGs interfere with reload/register allocation, so
combine often doesn't touch/clean-up instructions containing a SUBREG.
This is the first and simplest of two patches to tackle that problem,
by teaching combine to avoid converting explicit TRUNCATEs into
SUBREGs that it can't handle.
Consider the following (hypothetical) sequence of instructions on
a STORE_FLAG_VALUE=1 target, which stores a zero or one in an SI
register, then uselessly truncates to QImode, then extends it again.
(set (reg:SI 27) (ne:SI (reg:BI 28) (const_int 0)))
(set (reg:QI 26) (truncate:QI (reg:SI 27)))
(set (reg:SI 0) (zero_extend:SI (reg:QI 26)))
which ideally (i.e. with this patch) combine would simplify to:
(set (reg:SI 0) (ne:SI (reg:BI 28) (const_int 0)))
Alas currently, during combine the middle TRUNCATE is converted into
a lowpart SUBREG, which subst then turns into (clobber (const_int 0)),
abandoning the attempted combination, that then never reaches recog.
2021-08-31 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* combine.c (combine_simplify_rtx): Avoid converting an explicit
TRUNCATE into a lowpart SUBREG on !TRULY_NOOP_TRUNCATION targets.
* simplify-rtx.c (simplify_unary_operation_1): Likewise.
This fixes a typo in the condition guarding the cleanup of the
visited flag of costed scalar stmts.
2021-08-31 Richard Biener <rguenther@suse.de>
PR tree-optimization/102142
* tree-vect-slp.c (vect_bb_vectorization_profitable_p): Fix
condition under which to unset the visited flag.
* g++.dg/torture/pr102142.C: New testcase.
Quoting from https://gcc.gnu.org/pipermail/gcc/2021-July/236716.html:
--------------------------------------------------------------------
It was pointed out to me off-list that config/aarch64/value-unwind.h
is missing the runtime exception. It looks like a few other files
are too; a fuller list is:
libgcc/config/aarch64/value-unwind.h
libgcc/config/frv/frv-abi.h
libgcc/config/i386/value-unwind.h
libgcc/config/pa/pa64-hpux-lib.h
Certainly for the aarch64 file this was simply a mistake;
it seems to have been copied from the i386 version, both of which
reference the runtime exception but don't actually include it.
--------------------------------------------------------------------
Similarly, frv-abi.h referenced the exception but didn't include it.
pa64-hpux-lib.h was missing any reference to the exception.
The decision was that this was simply a mistake
[https://gcc.gnu.org/pipermail/gcc/2021-July/236717.html]:
--------------------------------------------------------------------
[…] It generally is
considered a textual omission. The runtime library components of GCC
are intended to be licensed under the runtime exception, which was
granted and approved at the time of introduction.
--------------------------------------------------------------------
and that we should simply change all of the files above
[https://gcc.gnu.org/pipermail/gcc/2021-July/236719.html]:
--------------------------------------------------------------------
Please correct the text in the files. The files in libgcc used in the
GCC runtime are intended to be licensed with the runtime exception and
GCC previously was granted approval for that licensing and purpose.
[…]
The runtime exception explicitly was intended for this purpose and
usage at the time that GCC received approval to apply the exception.
--------------------------------------------------------------------
libgcc/
* config/aarch64/value-unwind.h: Add missing runtime exception
paragraph.
* config/frv/frv-abi.h: Likewise.
* config/i386/value-unwind.h: Likewise.
* config/pa/pa64-hpux-lib.h: Likewise.
The following avoids applying TER to possibly trapping expressions,
preventing a trapping FP multiplication to be moved across a call
that should not be executed.
2021-08-31 Richard Biener <rguenther@suse.de>
PR middle-end/102129
* tree-ssa-ter.c (find_replaceable_in_bb): Do not move
possibly trapping expressions across calls.
GDB is going to start using libbacktrace, so add a build dependency
between the two modules. This change needs to be added into the GCC
toplevel files, and then back-ported to the binutils-gdb repository.
2021-08-31 Andrew Burgess <andrew.burgess@embecosm.com>
ChangeLog:
* Makefile.def: Add all-gdb dependency on all-libbacktrace.
* Makefile.in: Regenerate.
As mentioned in the PR, this hunk is guarded with !wi::neg_p (r1val | r1mask, sgn)
which means if sgn is UNSIGNED, it is always true, but r1val | r1mask in
widest_int is still sign-extended. That means wi::clz (arg) returns 0,
wi::get_precision (arg) returns some very large number
(WIDE_INT_MAX_PRECISION, on x86_64 576 bits) and width is 64, so we end up
with lzcount of -512 where the code afterwards expects a non-negative
lzcount. For arg without the sign bit set the code works right, those
numbers are zero extended and so wi::clz must return wi::get_precision (arg) - width
plus number of leading zero bits within the width precision.
The patch fixes it by handling the sign-extension specially, either it could
be done through wi::neg_p (arg) check, but lzcount == 0 works identically.
2021-08-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/102134
* tree-ssa-ccp.c (bit_value_binop) <case RSHIFT_EXPR>: If sgn is
UNSIGNED and r1val | r1mask has MSB set, ensure lzcount doesn't
become negative.
* gcc.c-torture/execute/pr102134.c: New test.
The problem here is with -fPIC, both cmp and move
don't bind locally so they are not even tried to be
inlined. This fixes the issue by marking both
functions as static and now the testcase passes
for both -fPIC and -fno-PIC cases.
OK? Tested on x86_64-linux-gnu.
gcc/testsuite/ChangeLog:
* gcc.dg/ipa/inline-8.c: Mark cmp and move as
static so they both bind local and available for
inlinine.
So the main issue here is that some signals are not setup unlike collect2.
So this merges the setting up of the signal handlers to one function in
collect-utils and has collect2 and lto-wrapper call that function.
OK? Bootstrapped and tested on x86_64-linux-gnu with no regressions.
gcc/ChangeLog:
PR driver/79181
* collect-utils.c (setup_signals): New declaration.
* collect-utils.h (setup_signals): New function.
* collect2.c (handler): Delete.
(main): Instead of manually setting up the signals,
just call setup_signals.
* lto-wrapper.c (main): Likewise.
The problem here is the x86_64 back-end uses a signed integer
for alignment and then divides by BITS_PER_UNIT so if we had
INT_MIN (which is what 1<<28*8 is), we would get the wrong result.
This fixes the problem by using unsigned for the argument to
x86_output_aligned_bss and x86_output_aligned_bss.
OK? Bootstrapped and tested on x86_64-linux-gnu.
gcc/ChangeLog:
PR target/56337
* config/i386/i386-protos.h (x86_output_aligned_bss):
Change align argument to unsigned type.
(x86_elf_aligned_decl_common): Likewise.
* config/i386/i386.c (x86_elf_aligned_decl_common): Likewise.
(x86_output_aligned_bss): Likewise.
Currently, the asm output file for MIPS has no rev info.
It can make some trouble, for example:
assembler is mips1 by default,
gcc is fpxx by default.
To assemble the output of gcc -S, we have to pass -mips2
to assembler.
gcc/ChangeLog:
* config/mips/mips.c (mips_module_isa_name): New.
mips_file_start: add .module mipsREV to all asm output
Currently mips-cpu.defs, mips.h, netbsd.h and config.gcc are
using hardcoded numbers for isa level.
Let's replace them with more readable enum mips_isa.
gcc/ChangeLog:
* config/mips/mips.h (struct mips_cpu_info): define enum mips_isa;
use enum instead of int for 'isa' member.
* config.gcc, config/mips/mips.c, config/mips/mips-cpus.def,
config/mips/netbsd.h: replace hardcoded numbers with enum.
Currently for evex vpcmpeqb instruction, we have two forms of rtl
template representation, one is (unspec [op1 op2] UNSPEC_MASK_EQ), the
other is (unspec [op1, op2, const_int 0] UNSPEC_PCMP), which increases
the maintenance burden, such as optimization (not: vpcmpeqb)
to (vpcmpneqb) requires two define_insn_and_split to match the two
forms respectively, this patch removes UNSPEC_MASK_EQ/GT, unifying
them into the form of UNSPEC_PCMP.
gcc/ChangeLog:
* config/i386/sse.md (*<avx512>_ucmp<mode>3_1): Change from
define_split to define_insn_and_split.
(*avx2_eq<mode>3): Removed.
(<avx512>_eq<mode>3<mask_scalar_merge_name>): Adjust pattern
(<avx512>_eq<mode>3<mask_scalar_merge_name>_1): Rename to ..
(*<avx512>_eq<mode>3<mask_scalar_merge_name>_1): .. this, and
adjust pattern.
(*avx2_gt<mode>3): Removed.
(<avx512>_gt<mode>3<mask_scalar_merge_name>): Change from
define_insn to define_expand, and adjust pattern.
(UNSPEC_MASKED_EQ, UNSPEC_MASKED_GT): Removed.
gcc/testsuite/ChangeLog:
* gcc.target/i386/avx512bw-vpcmpeqb-1.c: Adjust testcase.
* gcc.target/i386/avx512bw-vpcmpeqw-1.c: Ditto.
* gcc.target/i386/avx512bw-vpcmpgtb-1.c: Ditto.
* gcc.target/i386/avx512bw-vpcmpgtw-1.c: Ditto.
* gcc.target/i386/avx512f-vpcmpeqd-1.c: Ditto.
* gcc.target/i386/avx512f-vpcmpeqq-1.c: Ditto.
* gcc.target/i386/avx512f-vpcmpgtd-1.c: Ditto.
* gcc.target/i386/avx512f-vpcmpgtq-1.c: Ditto.
* gcc.target/i386/avx512vl-vpcmpeqd-1.c: Ditto.
* gcc.target/i386/avx512vl-vpcmpeqq-1.c: Ditto.
* gcc.target/i386/avx512vl-vpcmpgtd-1.c: Ditto.
* gcc.target/i386/avx512vl-vpcmpgtq-1.c: Ditto.
* gcc.target/i386/bitwise_mask_op-1.c: Ditto.
* gcc.target/i386/bitwise_mask_op-2.c: Ditto.
Most of the state-management code in the analyzer involves
modifying state objects in-place, which implies a single outcome.
(I originally implemented in-place modification because I wanted
to avoid having to create copies of state objects, and it's now
very difficult to change this aspect of the analyzer's design)
However, there are various special-cases such as "realloc" for which
it's best to split the state into multiple outcomes.
This patch adds a mechanism for "bifurcating" the analysis in places
where there isn't a split in the CFG, and uses it to implement realloc,
in this case treating it as having 3 possible outcomes:
- failure, returning NULL
- success, growing the buffer in-place without moving it
- success, allocating a new buffer, copying the content of the old
buffer to it, and freeing the old buffer.
gcc/ChangeLog:
PR analyzer/99260
* Makefile.in (ANALYZER_OBJS): Add analyzer/call-info.o.
gcc/analyzer/ChangeLog:
PR analyzer/99260
* analyzer.h (class custom_edge_info): New class, adapted from
exploded_edge::custom_info_t. Make member functions const.
Make update_model return bool, converting edge param from
reference to a pointer, and adding a ctxt param.
(class path_context): New class.
* call-info.cc: New file.
* call-info.h: New file.
* engine.cc: Include "analyzer/call-info.h" and <memory>.
(impl_region_model_context::impl_region_model_context): Update for
new m_path_ctxt field.
(impl_region_model_context::bifurcate): New.
(impl_region_model_context::terminate_path): New.
(impl_region_model_context::get_malloc_map): New.
(impl_sm_context::impl_sm_context): Update for new m_path_ctxt
field.
(impl_sm_context::get_fndecl_for_call): Likewise.
(impl_sm_context::set_next_state): Likewise.
(impl_sm_context::warn): Likewise.
(impl_sm_context::is_zero_assignment): Likewise.
(impl_sm_context::get_path_context): New.
(impl_sm_context::m_path_ctxt): New.
(impl_region_model_context::on_condition): Update for new
path_ctxt param. Handle m_enode_for_diag being NULL.
(impl_region_model_context::on_phi): Update for new path_ctxt
param.
(exploded_node::on_stmt): Add path_ctxt param, updating ctor calls
to use it as necessary. Use it to bail out after sm-handling,
if needed.
(exploded_node::detect_leaks): Update for new path_ctxt param.
(dynamic_call_info_t::update_model): Update for conversion of
exploded_edge::custom_info_t to custom_edge_info.
(dynamic_call_info_t::add_events_to_path): Likewise.
(rewind_info_t::update_model): Likewise.
(rewind_info_t::add_events_to_path): Likewise.
(exploded_edge::exploded_edge): Likewise.
(exploded_graph::add_edge): Likewise.
(exploded_graph::maybe_process_run_of_before_supernode_enodes):
Update for new path_ctxt param.
(class impl_path_context): New.
(exploded_graph::process_node): Update for new path_ctxt param.
Create an impl_path_context and pass it to exploded_node::on_stmt.
Use it to terminate iterating stmts if terminate_path is called
on it. After processing a run of stmts, query path_ctxt to
potentially terminate the analysis path, and/or to "bifurcate" the
analysis into multiple additional paths.
(feasibility_state::maybe_update_for_edge): Update for new
update_model ctxt param.
* exploded-graph.h
(impl_region_model_context::impl_region_model_context): Add
path_ctxt param.
(impl_region_model_context::bifurcate): New.
(impl_region_model_context::terminate_path): New
(impl_region_model_context::get_ext_state): New.
(impl_region_model_context::get_malloc_map): New.
(impl_region_model_context::m_path_ctxt): New field.
(exploded_node::on_stmt): Add path_ctxt param.
(class exploded_edge::custom_info_t): Move to analyzer.h, renaming
to custom_edge_info, and making the changes as noted in analyzer.h
above.
(exploded_edge::exploded_edge): Update for these changes to
exploded_edge::custom_info_t.
(exploded_edge::m_custom_info): Likewise.
(class dynamic_call_info_t): Likewise.
(class rewind_info_t): Likewise.
(exploded_graph::add_edge): Likewise.
* program-state.cc (program_state::on_edge): Update for new
path_ctxt param.
(program_state::push_call): Likewise.
(program_state::returning_call): Likewise.
(program_state::prune_for_point): Likewise.
* region-model-impl-calls.cc: Include "analyzer/call-info.h".
(call_details::get_fndecl_for_call): New.
(region_model::impl_call_realloc): Reimplement.
* region-model.cc (region_model::on_call_pre): Move call to
impl_call_realloc to...
(region_model::on_call_post): ...here. Consolidate creation
of call_details instance.
(noop_region_model_context::bifurcate): New.
(noop_region_model_context::terminate_path): New.
* region-model.h (call_details::get_call_stmt): New.
(call_details::get_fndecl_for_call): New.
(region_model::on_realloc_with_move): New.
(region_model_context::bifurcate): New.
(region_model_context::terminate_path): New.
(region_model_context::get_ext_state): New.
(region_model_context::get_malloc_map): New.
(noop_region_model_context::bifurcate): New.
(noop_region_model_context::terminate_path): New.
(noop_region_model_context::get_ext_state): New.
(noop_region_model_context::get_malloc_map): New.
* sm-malloc.cc: Include "analyzer/program-state.h".
(malloc_state_machine::on_realloc_call): Reimplement.
(malloc_state_machine::on_realloc_with_move): New.
(region_model::on_realloc_with_move): New.
* sm-signal.cc (class signal_delivery_edge_info_t): Update for
conversion from exploded_edge::custom_info_t to custom_edge_info.
* sm.h (sm_context::get_path_context): New.
* svalue.cc (svalue::maybe_get_constant): Call
unwrap_any_unmergeable.
gcc/testsuite/ChangeLog:
PR analyzer/99260
* gcc.dg/analyzer/capacity-2.c: Update for changes to realloc
analysis.
* gcc.dg/analyzer/pr99193-1.c: Likewise.
* gcc.dg/analyzer/pr99193-3.c: Likewise.
* gcc.dg/analyzer/realloc-1.c: Likewise. Add test coverage for
realloc of non-heap pointer, realloc from mismatching allocator,
and realloc on a freed pointer.
* gcc.dg/analyzer/realloc-2.c: New test.
I noticed that after the static_assert failures in lwg3466.cc, we got
various follow-on errors because we went ahead and tried to instantiate the
promise<T> member functions even after instantiating the class itself ran
into problems. Interrupting instantiation of the class itself seems likely
to cause error-recovery problems, but preventing instantiation of member
functions seems strictly better for error-recovery.
This doesn't fix any of the specific testcases in PR96286, but addresses
part of that problem space.
PR c++/96286
gcc/cp/ChangeLog:
* cp-tree.h (struct lang_type): Add erroneous bit-field.
(CLASSTYPE_ERRONEOUS): New.
* pt.c (limit_bad_template_recursion): Check it.
(instantiate_class_template_1): Set it.
libstdc++-v3/ChangeLog:
* testsuite/30_threads/promise/requirements/lwg3466.cc:
Remove dg-prune-outputs.
gcc/testsuite/ChangeLog:
* g++.dg/template/access2.C: Split struct A.
While working on the patch for PR101460, I noticed that we were losing the
expression location when folding class prvalue expressions. The final patch
doesn't fold class prvalues, but this still seems a worthwhile change. I
don't add location wrappers for scalar prvalues because many callers are
trying to fold them away.
gcc/cp/ChangeLog:
* constexpr.c (cxx_eval_outermost_constant_expr): Copy
expr location to result.
As discussed in the PR, we were giving a lot of unnecessary errors for this
testcase because we didn't try to do constant evaluation until
convert_nontype_argument, which happens for each of the candidates. But
when looking at a template-id as the function operand of a call, we can try
to fold arguments before we get into overload resolution.
PR c++/101460
gcc/cp/ChangeLog:
* cp-tree.h (cxx_constant_value_sfinae): Declare.
* constexpr.c (cxx_constant_value_sfinae): New.
* pt.c (fold_targs_r, maybe_fold_fn_template_args): New.
(tsubst_copy_and_build) [CALL_EXPR]: Call
maybe_fold_fn_template_args.
gcc/testsuite/ChangeLog:
* g++.dg/template/explicit-args6.C: New test.
gcc/fortran/ChangeLog:
PR fortran/102113
* match.c (gfc_match_goto): Allow for whitespace in parsing list
of labels.
gcc/testsuite/ChangeLog:
PR fortran/102113
* gfortran.dg/goto_9.f90: New test.
Since == is not portable, it is better to use = in contrib/
download_prerequisites. The only place == was used is inside
the function md5_check which is used only on Mac OS X.
Tested on Mac OS X as:
./contrib/download_prerequisites --md5
Both with all files having the correct checksum and one with a broken one.
contrib/ChangeLog:
* download_prerequisites (md5_check): Replace == inside
test with = to be more portable.
I noticed that concepts-lambda14.C had two useless requires-expressions:
static_assert(requires { C<T>; });
always succeeds, because C<T> is always a valid expression for any type,
regardless of whether C is satisfied for a particular type. Presumably the
user means
static_assert(requires { requires C<T>; });
to make the C<T> a nested-requirement. Of course,
static_assert(C<T>);
is much simpler and means the same thing; this is more relevant in the
middle of a longer requires-expression, such as the bug this warning found
in cmcstl2:
template<class I>
META_CONCEPT input_iterator =
input_or_output_iterator<I> &&
readable<I> &&
requires(I& i, const I& ci) {
typename iterator_category_t<I>;
derived_from<iterator_category_t<I>, input_iterator_tag>;
i++;
};
where 'requires' is missing before 'derived_from'.
gcc/ChangeLog:
* doc/invoke.texi: Document -Wmissing-requires.
gcc/c-family/ChangeLog:
* c.opt: Add -Wmissing-requires.
gcc/cp/ChangeLog:
* parser.c (cp_parser_simple_requirement): Warn about missing
requires.
gcc/testsuite/ChangeLog:
* g++.dg/cpp2a/concepts-lambda14.C: Add expected warnings.
gcc/fortran/ChangeLog:
PR fortran/101349
* resolve.c (resolve_allocate_expr): An unlimited polymorphic
argument to ALLOCATE must be ALLOCATABLE or a POINTER. Fix the
corresponding check.
gcc/testsuite/ChangeLog:
PR fortran/101349
* gfortran.dg/unlimited_polymorphic_33.f90: New test.
2021-08-30 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
* config/rs6000/rs6000-call.c (rs6000_init_builtins): Change
initialization of V2DI_type_node and unsigned_V2DI_type_node.
2021-03-04 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
* config/rs6000/darwin.h (SUBTARGET_INIT_BUILTINS): Use the new
decl when new_builtins_are_live.
* config/rs6000/rs6000-builtin-new.def (__builtin_cfstring): New
built-in.
Add include hack to define PRIdPTR, PRIiPTR, PRIoPTR, PRIuPTR, PRIxPTR
and PRIXPTR in inttypes.h.
2021-08-30 John David Anglin <danglin@gcc.gnu.org>
fixincludes/ChangeLog:
* inclhack.def (hpux_c99_inttypes5): New hack to define PRIdPTR, etc.
* fixincl.x: Regenerate.
* tests/base/inttypes.h: Update.
This reworks the previous attempt to avoid leaving around if-converted
scalar code in BB vectorized loop bodies to keep costing independent
subgraphs which should address the observed regression with 519.lbm_r.
For this to work we now first cost all subgraphs and only after
doing that proceed to emit vectorized code.
2021-08-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/102128
* tree-vect-slp.c (vect_bb_vectorization_profitable_p):
Move scanning for if-converted scalar code to the caller
and instead delay clearing the visited flag for profitable
subgraphs.
(vect_slp_region): Cost all subgraphs before scheduling.
For if-converted BB vectorization scan for scalar COND_EXPRs
and do not vectorize if any found and the cost model is
very-cheap.
This makes -fexceptions enabled by -fnon-call-exceptions, removing
the odd state of !flag_exceptions && flag_non_call_exceptions from
middle-end consideration.
2021-08-30 Richard Biener <rguenther@suse.de>
* common.opt (fexceptions): Mark
EnabledBy(fnon-call-exceptions).
* doc/invoke.texi (fnon-call-exceptions): Document this
enables -fexceptions.
abort() is used in gcc_assert() and gcc_unreachable() which is used by target
libraries such as libgcov.a. This patch changes the abort() definition under
certain conditions. If inhibit_libc is defined and abort is not already
defined, then abort() is defined to __builtin_trap().
The inhibit_libc define is usually defined if GCC is built for targets running
in embedded systems which may optionally use a C standard library. If
inhibit_libc is defined, then there may be still a full featured abort()
available. abort() is a heavy weight function which depends on signals and
file streams. For statically linked applications, this means that a dependency
on gcc_assert() pulls in the support for signals and file streams. This could
prevent using gcov to test low end targets for example. Using __builtin_trap()
avoids these dependencies if the target implements a "trap" instruction. The
application or operating system could use a trap handler to react to failed GCC
runtime checks which caused a trap.
gcc/
* tsystem.h (abort): Define abort() if inhibit_libc is defined and it
is not already defined.
