The current F2018 draft (N2137) specifies behavior of the RECL=
specifier in the INQUIRE statement, where it previously was left as
undefined. Namely:
- If the unit is not connected, RECL= should be given the value -1.
- If the unit is connected with stream access, RECL= should be given
the value -2.
Further, as PR 53796 describes, the handling of RECL= is poor in other
ways as well. When the recl is set to the maximum possible
(GFC_INTEGER_8_HUGE / LLONG_MAX), which it does by default except for
preconnected units, and when INQUIRE(RECL=) is used with a 4 byte
integer, the value is truncated and the 4 byte value is thus
-1. Fixing this to generate an error is a lot of work, as currently
the truncation is done by the frontend, the library sees only an 8
byte value with no indication that the frontend is going to copy it to
a 4 byte one. Instead, this patch does a bit twiddling trick such that
the truncated 4 byte value is GFC_INTEGER_4_HUGE while still being
0.99999999 * GFC_INTEGER_8_HUGE which is large enough for all
practical purposes.
Finally, the patch removes GFORTRAN_DEFAULT_RECL which was used only
for preconnected units, and instead uses the same approach as describe
above.
Regtested on x86_64-pc-linux-gnu, Ok for trunk.
gcc/fortran/ChangeLog:
2017-11-28 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/53796
* gfortran.texi: Remove mentions of GFORTRAN_DEFAULT_RECL.
libgfortran/ChangeLog:
2017-11-28 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/53796
* io/inquire.c (inquire_via_unit): Set recl to -1 for unconnected
units.
* io/io.h (default_recl): New variable.
* io/open.c (new_unit): Set recl to default_recl for sequential,
-2 for stream access.
* io/transfer.c (read_block_form): Test against default_recl
instead of DEFAULT_RECL.
(write_block): Likewise.
* io/unit.c (init_units): Calculate max_offset, default_recl.
* libgfortran.h (DEFAULT_RECL): Remove.
* runtime/environ.c: Remove GFORTRAN_DEFAULT_RECL.
gcc/testsuite/ChangeLog:
2017-11-28 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/53796
* gfortran.dg/inquire_recl_f2018.f90: New test.
From-SVN: r255215
Test case that requires 4 GB RAM that exercises eoshift0:
program main
implicit none
integer(1) :: line(2_8**31+10)
line = 42
line = eoshift(line, 2_8**31+7)
print *, line(1:4)
print *, line((ubound(line, 1, kind=8)-4):ubound(line, 1, kind=8))
end program main
Before patch:
❯ ./a.out
0 0 0 0
42 42 42 42 42
With patch:
❯ ./a.out
42 42 42 0
0 0 0 0 0
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2017-11-22 Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics/eoshift0.c (eoshift0): Make shift an index_type.
* intrinsics/eoshift2.c (eoshift2): Make shift an index_type.
From-SVN: r255077
2017-11-22 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/36313
* Makefile.am: Add i_maxloc0s_c, i_maxloc1s_c, i_maxloc2s_c,
i_minloc0s_c, i_minloc1s_c and i_minloc2s_c.
* Makefile.in: Regenerated.
* generated/maxloc0_16_s1.c: New file.
* generated/maxloc0_16_s4.c: New file.
* generated/maxloc0_4_s1.c: New file.
* generated/maxloc0_4_s4.c: New file.
* generated/maxloc0_8_s1.c: New file.
* generated/maxloc0_8_s4.c: New file.
* generated/maxloc1_16_s1.c: New file.
* generated/maxloc1_16_s4.c: New file.
* generated/maxloc1_4_s1.c: New file.
* generated/maxloc1_4_s4.c: New file.
* generated/maxloc1_8_s1.c: New file.
* generated/maxloc1_8_s4.c: New file.
* generated/maxloc2_16_s1.c: New file.
* generated/maxloc2_16_s4.c: New file.
* generated/maxloc2_4_s1.c: New file.
* generated/maxloc2_4_s4.c: New file.
* generated/maxloc2_8_s1.c: New file.
* generated/maxloc2_8_s4.c: New file.
* generated/minloc0_16_s1.c: New file.
* generated/minloc0_16_s4.c: New file.
* generated/minloc0_4_s1.c: New file.
* generated/minloc0_4_s4.c: New file.
* generated/minloc0_8_s1.c: New file.
* generated/minloc0_8_s4.c: New file.
* generated/minloc1_16_s1.c: New file.
* generated/minloc1_16_s4.c: New file.
* generated/minloc1_4_s1.c: New file.
* generated/minloc1_4_s4.c: New file.
* generated/minloc1_8_s1.c: New file.
* generated/minloc1_8_s4.c: New file.
* generated/minloc2_16_s1.c: New file.
* generated/minloc2_16_s4.c: New file.
* generated/minloc2_4_s1.c: New file.
* generated/minloc2_4_s4.c: New file.
* generated/minloc2_8_s1.c: New file.
* generated/minloc2_8_s4.c: New file.
* m4/iforeach-s.m4: New file.
* m4/ifunction-s.m4: New file.
* m4/maxloc0s.m4: New file.
* m4/maxloc1s.m4: New file.
* m4/maxloc2s.m4: New file.
* m4/minloc0s.m4: New file.
* m4/minloc1s.m4: New file.
* m4/minloc2s.m4: New file.
* gfortran.map: Add new functions.
* libgfortran.h: Add gfc_array_s1 and gfc_array_s4.
2017-11-22 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/36313
* check.c (int_or_real_or_char_check_f2003): New function.
* iresolve.c (gfc_resolve_maxloc): Add number "2" for
character arguments and rank-zero return value.
(gfc_resolve_minloc): Likewise.
* trans-intrinsic.c (gfc_conv_intrinsic_minmaxloc): Handle case of
character arguments and rank-zero return value by removing
unneeded arguments and calling the library function.
2017-11-22 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/36313
* gfortran.dg/maxloc_string_1.f90: New test.
* gfortran.dg/minloc_string_1.f90: New test.
From-SVN: r255070
2017-11-22 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/83070
* intrinsics/eoshift0.c (eoshift0): Fix -Wsign-compare warning by
making a_ex and r_ex index_type instead of size_t.
From-SVN: r255045
Now that the ABI supports large record lengths, there's a few places
in libgfortran where we need to use larger types. For internal units
which by definition are in-memory, it's enought to use ptrdiff_t, for
external units gfc_offset.
Regtested on x86_64-pc-linux-gnu?
libgfortran/ChangeLog:
2017-11-19 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* io/transfer.c (skip_record): Use gfc_offset to handle large
records.
(next_record_r): Likewise.
(sset): Likewise.
(next_record_w): Use gfc_offset/ptrdiff_t appropriately.
From-SVN: r254918
This is a straightforward change that we can do now that the ABI has
been bumped (again!).
Regtested on x86_64-pc-linux-gnu.
gcc/fortran/ChangeLog:
2017-11-18 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* ioparm.def (IOPARM): Make recl_in intio, and recl_out pintio.
libgfortran/ChangeLog:
2017-11-18 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* io/io.h: Make recl_in a GC_IO_INT and recl_out a type
GFC_IO_INT*.
gcc/testsuite/ChangeLog:
2017-11-18 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* gfortran.dg/large_recl.f90: New test.
From-SVN: r254915
2017-10-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Rimvydas (RJ)
PR libgfortran/81938
io/format.c (free_format_data): Don't try to free vlist
descriptors past the end of the fnode array.
From-SVN: r254163
2017-10-10 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/82233
* intrinsics/execute_command_line.c (execute_command_line):
No call to runtime_error if cmdstat is present.
2017-10-10 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/82233
* gfortran.dg/execute_command_line_3.f90: New test.
From-SVN: r253593
2017-09-10 Paul Thomas <pault@gcc.gnu.org>
PR fortran/34640
PR fortran/40737
PR fortran/55763
PR fortran/57019
PR fortran/57116
* expr.c (is_subref_array): Add class pointer array dummies
to the list of expressions that return true.
* trans-array.c: Add SPAN_FIELD and update indices for
subsequent fields.
(gfc_conv_descriptor_span, gfc_conv_descriptor_span_get,
gfc_conv_descriptor_span_set, is_pointer_array,
get_array_span): New functions.
(gfc_get_descriptor_offsets_for_info): New function to preserve
API for access to descriptor fields for trans-types.c.
(gfc_conv_scalarized_array_ref): If the expression is a subref
array, make sure that info->descriptor is a descriptor type.
Otherwise, if info->descriptor is a pointer array, set 'decl'
and fix it if it is a component reference.
(build_array_ref): Simplify handling of class array refs by
passing the vptr to gfc_build_array_ref rather than generating
the pointer arithmetic in this function.
(gfc_conv_array_ref): As in gfc_conv_scalarized_array_ref, set
'decl'.
(gfc_array_allocate): Set the span field if this is a pointer
array. Use the expr3 element size if it is available, so that
the dynamic type element size is used.
(gfc_conv_expr_descriptor): Set the span field for pointer
assignments.
* trans-array.h: Prototypes for gfc_conv_descriptor_span_get
gfc_conv_descriptor_span_set and
gfc_get_descriptor_offsets_for_info added.
trans-decl.c (gfc_get_symbol_decl): If a non-class pointer
array, mark the declaration as a GFC_DECL_PTR_ARRAY_P. Remove
the setting of GFC_DECL_SPAN.
(gfc_trans_deferred_vars): Set the span field to zero in thge
originating scope.
* trans-expr.c (gfc_conv_procedure_call): Do not use copy-in/
copy-out to pass subref expressions to a pointer dummy.
(gfc_trans_pointer_assignment): Remove code for setting of
GFC_DECL_SPAN. Set the 'span' field for non-class pointers to
class function results. Likewise for rank remap. In the case
that the target is not a whole array, use the target array ref
for remap and, since the 'start' indices are missing, set the
lbounds to one, as required by the standard.
* trans-intrinsic.c (conv_expr_ref_to_caf_ref): Pick up the
'token' offset from the field decl in the descriptor.
(conv_isocbinding_subroutine): Set the 'span' field.
* trans-io.c (gfc_trans_transfer): Always scalarize pointer
array io.
* trans-stmt.c (trans_associate_var): Set the 'span' field.
* trans-types.c (gfc_get_array_descriptor_base): Add the 'span'
field to the array descriptor.
(gfc_get_derived_type): Pointer array components are marked as
GFC_DECL_PTR_ARRAY_P.
(gfc_get_array_descr_info): Replaced API breaking code for
descriptor offset calling gfc_get_descriptor_offsets_for_info.
* trans.c (get_array_span): New function.
(gfc_build_array_ref): Simplify by calling get_array_span and
obtain 'span' if 'decl' or 'vptr' present.
* trans.h : Rename DECL_LANG_FLAG_6, GFC_DECL_SUBREF_ARRAY_P,
as GFC_DECL_PTR_ARRAY_P.
2017-09-10 Paul Thomas <pault@gcc.gnu.org>
PR fortran/34640
* gfortran.dg/associate_24.f90: New test.
* gfortran.dg/assumed_type_2.f90: Adjust some of the tree dump
checks.
* gfortran.dg/no_arg_check_2.f90: Likewise.
* gfortran.dg/pointer_array_1.f90: New test.
* gfortran.dg/pointer_array_2.f90: New test.
* gfortran.dg/pointer_array_7.f90: New test.
* gfortran.dg/pointer_array_8.f90: New test.
* gfortran.dg/pointer_array_component_1.f90: New test.
* gfortran.dg/pointer_array_component_2.f90: New test.
* gfortran.dg/goacc/kernels-alias-4.f95: Bump up both tree scan
counts by 1.
PR fortran/40737
* gfortran.dg/pointer_array_3.f90: New test.
PR fortran/57116
* gfortran.dg/pointer_array_4.f90: New test.
PR fortran/55763
* gfortran.dg/pointer_array_5.f90: New test.
PR fortran/57019
* gfortran.dg/pointer_array_6.f90: New test.
2017-09-10 Paul Thomas <pault@gcc.gnu.org>
PR fortran/34640
* libgfortran/libgfortran.h: Add span field to descriptor.
* libgfortran/libtool-version : Bump up version number to 5:0:0.
From-SVN: r251949
2017-07-02 Thomas Koenig <tkoenig@gcc.gnu.org>
* intrinsics/eoshift0.c: For contiguous arrays, use
block algorithm. Use memcpy where possible.
2017-07-02 Thomas Koenig <tkoenig@gcc.gnu.org>
* gfortran/eoshift_3.f90: New test.
From-SVN: r249882
2017-06-24 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/52473
* Makefile.am: Add i_cshift1a_c. Add rules to generate files
from cshift1a.m4.
* Makefile.in: Regenerated.
* m4/cshift1a.m4: New file.
* m4/cshift.m4 (cshift1): Split up inner loop by removing
condition. Use memcpy where possible. Call helper functions
based on dtype.
* libgfortran.h: Add prototypes for cshift1_16_c10,
cshift1_16_c16, cshift1_16_c4, cshift1_16_c8, cshift1_16_i1,
cshift1_16_i16, cshift1_16_i2, cshift1_16_i4, cshift1_16_i8,
cshift1_16_r10, cshift1_16_r16, cshift1_16_r4, cshift1_16_r8,
cshift1_4_c10, cshift1_4_c16, cshift1_4_c4, cshift1_4_c8,
cshift1_4_i1, cshift1_4_i16, cshift1_4_i2, cshift1_4_i4,
cshift1_4_i8, cshift1_4_r10, cshift1_4_r16, cshift1_4_r4,
cshift1_4_r8, cshift1_8_c10, cshift1_8_c16, cshift1_8_c4,
cshift1_8_c8, cshift1_8_i1, cshift1_8_i16, cshift1_8_i2,
cshift1_8_i4, cshift1_8_i8, cshift1_8_r10, cshift1_8_r16,
cshift1_8_r4 and cshift1_8_r8.
* generated/cshift1_16_c10.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_c16.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_c4.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_c8.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_i1.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_i16.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_i2.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_i4.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_i8.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_r10.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_r16.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_r4.c: New file, generated from cshift1a.m4.
* generated/cshift1_16_r8.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_c10.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_c16.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_c4.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_c8.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_i1.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_i16.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_i2.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_i4.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_i8.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_r10.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_r16.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_r4.c: New file, generated from cshift1a.m4.
* generated/cshift1_4_r8.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_c10.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_c16.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_c4.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_c8.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_i1.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_i16.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_i2.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_i4.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_i8.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_r10.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_r16.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_r4.c: New file, generated from cshift1a.m4.
* generated/cshift1_8_r8.c: New file, generated from cshift1a.m4.
2017-06-24 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/52473
* gfortran.dg/cshift_2.f90: New test.
From-SVN: r249620
2017-05-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/53029
* list_read.c (list_formatted_read_scala): Set the err return
value to the common.flags error values.
* gfortran.dg/read_5.f90: New test.
From-SVN: r248577
* acinclude.m4 (LIBGFOR_CHECK_FMA3): Use test from
check_effective_target_fma in gcc.target/i386/i386.exp.
(LIBGFOR_CHECK_FMA4): Use test from check_effective_target_fma4.
* configure: Regenerate.
From-SVN: r248547
2017-05-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR boostrap/80889
* acinclude.m4: Also set HAVE_AVX128 on the false
branch of LIBGFOR_CHECK_AVX128.
* configure: Regenerated.
From-SVN: r248519
2017-05-19 Paul Thomas <pault@gcc.gnu.org>
PR fortran/80333
* trans-io.c (nml_get_addr_expr): If we are dealing with class
type data set tmp tree to get that address.
(transfer_namelist_element): Set the array spec to point to the
the class data.
2017-05-19 Paul Thomas <pault@gcc.gnu.org>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/80333
* list_read.c (nml_read_obj): Compute pointer into class/type
arrays from the nl->dim information. Update it for each iteration
of the loop for the given object.
2017-05-19 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/80333
* gfortran.dg/dtio_30.f03: New test.
From-SVN: r248293
2017-05-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/80727
* transfer.c (read_sf_internal): Remove bogus code to detect EOR.
(read_block_form): For internal units, generate EOR if no more
bytes left in unit and we are trying to read with ADVANCE='NO'.
* gfortran.dg/read_3.f90: New test.
From-SVN: r248080
Glibc 2.17 made __secure_getenv an officially supported function, and
renamed it secure_getenv. The libgfortran configure has checked for
both of these, per
https://sourceware.org/glibc/wiki/Tips_and_Tricks/secure_getenv.
Unfortunately, while the dynamical library (libc.so) retains the
__secure_getenv symbol for backwards compatibility, the static library
(libc.a) does not. This means that a libgfortran.a compiled against an
older glibc will not work if one tries to link against a newer
libc.a. This creates problems for providing gfortran binary
distributions that work on as many target systems as possible.
Thus, retain the support for __secure_getenv but call it only via a
weak reference.
Regtested on x86_64-pc-linux-gnu.
2017-05-11 Janne Blomqvist <jb@gcc.gnu.org>
* libgfortran.h: HAVE_SECURE_GETENV: Don't check
HAVE___SECURE_GETENV.
* environ/runtime.c (secure_getenv): Use __secure_getenv via a
weak reference.
From-SVN: r247927
2017-03-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/78670
* io/list_read.c (nml_get_obj_data): Delete code which calls the
child read procedure. (nml_read_obj): Insert the code which
calls the child procedure. Don't need to touch nodes if using
dtio since parent will not be traversing the components.
PR libgfortran/78670
* gfortran.dg/dtio_25.f90: Use 'a1' format when trying to read
a character of length 1. Update test for success.
* gfortran.dg/dtio_28.f03: New test.
* gfortran.dg/dtio_4.f90: Update to open test file with status =
'scratch' to delete the file when done.
From-SVN: r246576
2017-03-28 Janus Weil <janus@gcc.gnu.org>
PR fortran/78661
* trans-io.c (transfer_namelist_element): Perform a polymorphic call
to a DTIO procedure if necessary.
2017-03-28 Janus Weil <janus@gcc.gnu.org>
PR fortran/78661
* gfortran.dg/dtio_25.f90: Modified test case.
* gfortran.dg/dtio_27.f90: New test case.
2017-03-28 Janus Weil <janus@gcc.gnu.org>
PR fortran/78661
* io/write.c (nml_write_obj): Build a class container only if necessary.
From-SVN: r246546
2017-03-27 Dominique d'Humieres <dominiq@lps.ens.fr>
* io/list_read.c: Insert /* Fall through. */ in the macro
CASE_SEPARATORS in order to silence warnings.
From-SVN: r246507
2017-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/78881
* io/io.h (st_parameter_dt): Rename unused component last_char to
child_saved_iostat. Move comment to gfc_unit.
* io/list_read.c (list_formatted_read_scalar): After call to
child READ procedure, save the returned iostat value for later
check. (finish_list_read): Only finish READ if child_saved_iostat
was OK.
* io/transfer.c (read_sf_internal): If there is a saved character
in last character, seek back one. Add a new check for EOR
condition. (read_sf): If there is a saved character
in last character, seek back one. (formatted_transfer_scalar_read):
Initialize last character before invoking child procedure.
(data_transfer_init): If child dtio, set advance
status to nonadvancing. Move update of size and check for EOR
condition to before child dtio return.
* gfortran.dg/dtio_26.f90: New test.
From-SVN: r246478
This was a workaround for a cygwin bug which was fixed 4 years ago,
and cygwin hasn't supported affected versions for a long time.
2017-03-15 NightStrike <nightstrike@gmail.com>
Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics/random.c (getosrandom): Remove check for __CYGWIN__
preprocessor flag.
* intrinsics/system_clock.c: Likewise.
(system_clock_4): Likewise.
(system_clock_8): Likewise.
* intrinsics/time_1.h: Don't include windows.h if __CYGWIN__ is
defined.
Co-Authored-By: Janne Blomqvist <jb@gcc.gnu.org>
From-SVN: r246162
2017-03-11 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/78854
* io/list_read.c (nml_get_obj_data): Stash internal unit for
later use by child procedures.
* io/write.c (nml_write_obj): Likewise.
* io/tranfer.c (data_transfer_init): Minor whitespace.
* io/unit.c (set_internal_uit): Look for the stashed internal
unit and use it if found.
* gfortran.dg/dtio_25.f90: New test.
From-SVN: r246070
gcc/fortran/ChangeLog:
2017-03-05 Andre Vehreschild <vehre@gcc.gnu.org>
Alessandro Fanfarillo <fanfarillo.gcc@gmail.com>
* check.c (positive_check): Add new function checking constant for
being greater then zero.
(gfc_check_image_status): Add checking of image_status arguments.
(gfc_check_failed_or_stopped_images): Same but for failed_- and
stopped_images function.
* dump-parse-tree.c (show_code_node): Added output of FAIL IMAGE.
* gfortran.h (enum gfc_statement): Added FAIL_IMAGE_ST.
(enum gfc_isym_id): Added new intrinsic symbols.
(enum gfc_exec_op): Added EXEC_FAIL_IMAGE.
* gfortran.texi: Added description for the new API functions. Updated
coverage of gfortran of TS18508.
* intrinsic.c (add_functions): Added symbols to resolve new intrinsic
functions.
* intrinsic.h: Added prototypes.
* iresolve.c (gfc_resolve_failed_images): Resolve the failed_images
intrinsic.
(gfc_resolve_image_status): Same for image_status.
(gfc_resolve_stopped_images): Same for stopped_images.
* libgfortran.h: Added prototypes.
* match.c (gfc_match_if): Added matching of FAIL IMAGE statement.
(gfc_match_fail_image): Match a FAIL IMAGE statement.
* match.h: Added prototype.
* parse.c (decode_statement): Added matching for FAIL IMAGE.
(next_statement): Same.
(gfc_ascii_statement): Same.
* resolve.c: Same.
* simplify.c (gfc_simplify_failed_or_stopped_images): For COARRAY=
single a constant result can be returne.d
(gfc_simplify_image_status): For COARRAY=single the result is constant.
* st.c (gfc_free_statement): Added FAIL_IMAGE handling.
* trans-decl.c (gfc_build_builtin_function_decls): Added decls of the
new intrinsics.
* trans-expr.c (gfc_conv_procedure_call): This is first time all
arguments of a function are optional, which is now handled here
correctly.
* trans-intrinsic.c (conv_intrinsic_image_status): Translate
image_status.
(gfc_conv_intrinsic_function): Add support for image_status.
(gfc_is_intrinsic_libcall): Add support for the remaining new
intrinsics.
* trans-stmt.c (gfc_trans_fail_image): Trans a fail image.
* trans-stmt.h: Add the prototype for the above.
* trans.c (trans_code): Dispatch for fail_image.
* trans.h: Add the trees for the new intrinsics.
libgfortran/ChangeLog:
2017-03-05 Andre Vehreschild <vehre@gcc.gnu.org>
Alessandro Fanfarillo <fanfarillo.gcc@gmail.com>
* caf/libcaf.h: Added prototypes and stat codes for failed and stopped
images.
* caf/single.c (void _gfortran_caf_fail_image): Add the routine.
(int _gfortran_caf_image_status): Same.
(_gfortran_caf_failed_images): Same.
(_gfortran_caf_stopped_images): Same.
gcc/testsuite/ChangeLog:
2017-03-05 Andre Vehreschild <vehre@gcc.gnu.org>
Alessandro Fanfarillo <fanfarillo.gcc@gmail.com>
* gfortran.dg/coarray/fail_image_1.f08: New test.
* gfortran.dg/coarray/fail_image_2.f08: New test.
* gfortran.dg/coarray/failed_images_1.f08: New test.
* gfortran.dg/coarray/failed_images_2.f08: New test.
* gfortran.dg/coarray/image_status_1.f08: New test.
* gfortran.dg/coarray/image_status_2.f08: New test.
* gfortran.dg/coarray/stopped_images_1.f08: New test.
* gfortran.dg/coarray/stopped_images_2.f08: New test.
* gfortran.dg/coarray_fail_st.f90: New test.
* gfortran.dg/coarray_failed_images_1.f08: New test.
* gfortran.dg/coarray_image_status_1.f08: New test.
* gfortran.dg/coarray_stopped_images_1.f08: New test.
From-SVN: r245900
CYGWIN seems to include _mingw.h and thus __MINGW64_VERSION_MAJOR is
defined even though rand_s is not available. Thus add an extra check
for __CYGWIN__.
2017-02-27 Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics/random.c (getosrandom): Don't try to use rand_s on
CYGWIN.
From-SVN: r245755
2017-02-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/79382
* decl.c (access_attr_decl): Test for presence of generic DTIO
interface and emit error if not present.
2017-02-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/79382
* io/transfer.c (check_dtio_proc): New function.
(formatted_transfer_scalar_read): Use it.
(formatted_transfer_scalar_write): ditto.
2017-02-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/79382
* gfortran.dg/dtio_10.f90 : Change test of error message.
* gfortran.dg/dtio_23.f90 : New test.
* gfortran.dg/dtio_24.f90 : New test.
From-SVN: r245596
PR target/79127
* acinclude.m4 (LIBGFOR_CHECK_AVX512F): Ensure the test clobbers
some zmm16+ registers to verify they are handled by unwind info
properly if needed.
* configure: Regenerated.
From-SVN: r244636
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
In order to handle large character lengths on (L)LP64 targets, switch
the GFortran character length from an int to a size_t.
This is an ABI change, as procedures with character arguments take
hidden arguments with the character length.
I also changed the _size member in vtables from int to size_t, as
there were some cases where character lengths and sizes were
apparently mixed up and caused regressions otherwise. Although I
haven't tested, this might enable very large derived types as well.
Also, as there are some places in the frontend were negative character
lengths are used as special flag values, in the frontend the character
length is handled as a signed variable of the same size as a size_t,
although in the runtime library it really is size_t.
I haven't changed the character length variables for the co-array
intrinsics, as this is something that may need to be synchronized with
OpenCoarrays.
This is v4 of the patch. v3 was applied but had to reverted due to
breaking bootstrap. The fix is in resolve.c:resolve_charlen, where
it's necessary to check that an expression is constant before using
mpz_sgn.
Overview of v3 of the patch: All the issues pointed out by FX's review
of v2 have been fixed. In particular, there are now new functions
gfc_mpz_get_hwi and gfc_mpz_set_hwi, similar to the GMP functions
mpz_get_si and mpz_set_si, except that they get/set a HOST_WIDE_INT
instead of a long value. Similarly, gfc_get_int_expr now takes a
HOST_WIDE_INT instead of a long, gfc_extract_long is replaced by
gfc_extract_hwi. Also, the preliminary work to handle
gfc_charlen_type_node being unsigned has been removed.
Regtested on x86_64-pc-linux-gnu and i686-pc-linux-gnu.
frontend:
2017-01-13 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* class.c (gfc_find_derived_vtab): Use gfc_size_kind instead of
hardcoded kind.
(find_intrinsic_vtab): Likewise.
* expr.c (gfc_get_character_expr): Length parameter of type
gfc_charlen_t.
(gfc_get_int_expr): Value argument of type HOST_WIDE_INT.
(gfc_extract_hwi): New function.
(simplify_const_ref): Make string_len of type gfc_charlen_t.
(gfc_simplify_expr): Use HOST_WIDE_INT for substring refs.
* gfortran.h (gfc_mpz_get_hwi): New prototype.
(gfc_mpz_set_hwi): Likewise.
(gfc_charlen_t): New typedef.
(gfc_expr): Use gfc_charlen_t for character lengths.
(gfc_size_kind): New extern variable.
(gfc_extract_hwi): New prototype.
(gfc_get_character_expr): Use gfc_charlen_t for character length.
(gfc_get_int_expr): Use HOST_WIDE_INT type for value argument.
* iresolve.c (gfc_resolve_repeat): Pass string length directly without
temporary, use gfc_charlen_int_kind.
* match.c (select_intrinsic_set_tmp): Use HOST_WIDE_INT for charlen.
* misc.c (gfc_mpz_get_hwi): New function.
(gfc_mpz_set_hwi): New function.
* module.c (atom_int): Change type from int to HOST_WIDE_INT.
(parse_integer): Don't complain about large integers.
(write_atom): Use HOST_WIDE_INT for integers.
(mio_integer): Handle integer type mismatch.
(mio_hwi): New function.
(mio_intrinsic_op): Use HOST_WIDE_INT.
(mio_array_ref): Likewise.
(mio_expr): Likewise.
* resolve.c (resolve_select_type): Use HOST_WIDE_INT for charlen,
use snprintf.
(resolve_substring_charlen): Use gfc_charlen_int_kind.
(resolve_charlen): Use mpz_sgn to determine sign.
* simplify.c (gfc_simplify_repeat): Use HOST_WIDE_INT/gfc_charlen_t
instead of long.
* target-memory.c (size_character): Length argument of type
gfc_charlen_t.
(gfc_encode_character): Likewise.
(gfc_interpret_character): Use gfc_charlen_t.
* target-memory.h (gfc_encode_character): Modify prototype.
* trans-array.c (get_array_ctor_var_strlen): Use
gfc_conv_mpz_to_tree_type.
* trans-const.c (gfc_conv_mpz_to_tree_type): New function.
* trans-const.h (gfc_conv_mpz_to_tree_type): New prototype.
* trans-expr.c (gfc_class_len_or_zero_get): Build const of type
gfc_charlen_type_node.
(gfc_conv_intrinsic_to_class): Use gfc_charlen_int_kind instead of
4, fold_convert to correct type.
(gfc_conv_class_to_class): Build const of type size_type_node for
size.
(gfc_copy_class_to_class): Likewise.
(gfc_conv_string_length): Use same type in expression.
(gfc_conv_substring): Likewise, use HOST_WIDE_INT for charlen.
(gfc_conv_string_tmp): Make sure len is of the right type.
(gfc_conv_concat_op): Use same type in expression.
(gfc_conv_procedure_call): Likewise.
(alloc_scalar_allocatable_for_subcomponent_assignment):
fold_convert to right type.
(gfc_trans_subcomponent_assign): Likewise.
(trans_class_vptr_len_assignment): Build const of correct type.
(gfc_trans_pointer_assignment): Likewise.
(alloc_scalar_allocatable_for_assignment): fold_convert to right
type in expr.
(trans_class_assignment): Build const of correct type.
* trans-intrinsic.c (gfc_conv_associated): Likewise.
(gfc_conv_intrinsic_repeat): Do calculation in sizetype.
* trans-io.c (gfc_build_io_library_fndecls): Use
gfc_charlen_type_node for character lengths.
* trans-stmt.c (gfc_trans_label_assign): Build const of
gfc_charlen_type_node.
(gfc_trans_character_select): Likewise.
(gfc_trans_allocate): Likewise, don't typecast strlen result.
(gfc_trans_deallocate): Don't typecast strlen result.
* trans-types.c (gfc_size_kind): New variable.
(gfc_init_types): Determine gfc_charlen_int_kind and gfc_size_kind
from size_type_node.
testsuite:
2017-01-13 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* gfortran.dg/repeat_4.f90: Use integers of kind C_SIZE_T.
* gfortran.dg/repeat_7.f90: New test for PR 66310.
* gfortran.dg/scan_2.f90: Handle potential cast in assignment.
* gfortran.dg/string_1.f90: Limit to ilp32 targets.
* gfortran.dg/string_1_lp64.f90: New test.
* gfortran.dg/string_3.f90: Limit to ilp32 targets.
* gfortran.dg/string_3_lp64.f90: New test.
libgfortran:
2017-01-13 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
* intrinsics/args.c (getarg_i4): Use gfc_charlen_type.
(get_command_argument_i4): Likewise.
(get_command_i4): Likewise.
* intrinsics/chmod.c (chmod_internal): Likewise.
* intrinsics/env.c (get_environment_variable_i4): Likewise.
* intrinsics/extends_type_of.c (struct vtype): Use size_t for size
member.
* intrinsics/gerror.c (gerror): Use gfc_charlen_type.
* intrinsics/getlog.c (getlog): Likewise.
* intrinsics/hostnm.c (hostnm_0): Likewise.
* intrinsics/string_intrinsics_inc.c (string_len_trim): Rework to
work if gfc_charlen_type is unsigned.
(string_scan): Likewise.
* io/transfer.c (transfer_character): Modify prototype.
(transfer_character_write): Likewise.
(transfer_character_wide): Likewise.
(transfer_character_wide_write): Likewise.
(transfer_array): Typecast to avoid signed-unsigned comparison.
* io/unit.c (is_trim_ok): Use gfc_charlen_type.
* io/write.c (namelist_write): Likewise.
* libgfortran.h (gfc_charlen_type): Change typedef to size_t.
From-SVN: r244448
gcc/testsuite/ChangeLog:
2017-01-13 Andre Vehreschild <vehre@gcc.gnu.org>
PR fortran/70696
* gfortran.dg/coarray/event_3.f08: New test.
gcc/fortran/ChangeLog:
2017-01-13 Andre Vehreschild <vehre@gcc.gnu.org>
PR fortran/70696
* trans-expr.c (gfc_get_tree_for_caf_expr): Ensure the backend_decl
is valid before accessing it.
libgfortran/ChangeLog:
2017-01-13 Andre Vehreschild <vehre@gcc.gnu.org>
PR fortran/70696
* caf/single.c (_gfortran_caf_register): Allocate enough memory for
the event counter.
From-SVN: r244407
gcc/fortran/ChangeLog:
2017-01-07 Andre Vehreschild <vehre@gcc.gnu.org>
PR fortran/78781
PR fortran/78935
* expr.c (gfc_check_pointer_assign): Return the same error message for
rewritten coarray pointer assignments like for plain ones.
* gfortran.h: Change prototype.
* primary.c (caf_variable_attr): Set attributes used ones only only
ones. Add setting of pointer_comp attribute.
(gfc_caf_attr): Add setting of pointer_comp attribute.
* trans-array.c (gfc_array_allocate): Add flag that the component to
allocate is not an ultimate coarray component. Add allocation of
pointer arrays.
(structure_alloc_comps): Extend nullify to treat pointer components in
coarrays correctly. Restructure nullify to remove redundant code.
(gfc_nullify_alloc_comp): Allow setting caf_mode flags.
* trans-array.h: Change prototype of gfc_nullify_alloc_comp ().
* trans-decl.c (generate_coarray_sym_init): Call nullify_alloc_comp for
derived type coarrays with pointer components.
* trans-expr.c (gfc_trans_structure_assign): Also treat pointer
components.
(trans_caf_token_assign): Handle assignment of token of scalar pointer
components.
(gfc_trans_pointer_assignment): Call above routine.
* trans-intrinsic.c (conv_expr_ref_to_caf_ref): Add treating pointer
components.
(gfc_conv_intrinsic_caf_get): Likewise.
(conv_caf_send): Likewise.
* trans-stmt.c (gfc_trans_allocate): After allocating a derived type in
a coarray pre-register the tokens.
(gfc_trans_deallocate): Simply determining the coarray type (scalar or
array) and deregistering it correctly.
* trans-types.c (gfc_typenode_for_spec): Replace in_coarray flag by the
actual codim to allow lookup of array types in the cache.
(gfc_build_array_type): Likewise.
(gfc_get_array_descriptor_base): Likewise.
(gfc_get_array_type_bounds): Likewise.
(gfc_get_derived_type): Likewise.
* trans-types.h: Likewise.
* trans.c (gfc_deallocate_with_status): Enable deregistering of all kind
of coarray components.
(gfc_deallocate_scalar_with_status): Use free() in fcoarray_single mode
instead of caf_deregister.
libgfortran/ChangeLog:
2017-01-07 Andre Vehreschild <vehre@gcc.gnu.org>
PR fortran/78781
PR fortran/78935
* caf/single.c (send_by_ref): Fix addressing of non-allocatable scalar
destination components.
gcc/testsuite/ChangeLog:
2017-01-07 Andre Vehreschild <vehre@gcc.gnu.org>
* gfortran.dg/coarray/ptr_comp_1.f08: New test.
* gfortran.dg/coarray/ptr_comp_2.f08: New test.
* gfortran.dg/coarray/ptr_comp_3.f08: New test.
* gfortran.dg/coarray/ptr_comp_4.f08: New test.
* gfortran.dg/coarray_ptr_comp_1.f08: New test.
* gfortran.dg/coarray_ptr_comp_2.f08: New test.
* gfortran.dg/coarray_ptr_comp_3.f08: New test.
From-SVN: r244196
In order to handle large character lengths on (L)LP64 targets, switch
the GFortran character length from an int to a size_t.
This is an ABI change, as procedures with character arguments take
hidden arguments with the character length.
I also changed the _size member in vtables from int to size_t, as
there were some cases where character lengths and sizes were
apparently mixed up and caused regressions otherwise. Although I
haven't tested, this might enable very large derived types as well.
Also, as there are some places in the frontend were negative character
lengths are used as special flag values, in the frontend the character
length is handled as a signed variable of the same size as a size_t,
although in the runtime library it really is size_t.
I haven't changed the character length variables for the co-array
intrinsics, as this is something that may need to be synchronized with
OpenCoarrays.
This is v3 of the patch. All the issues pointed out by FX's review of
v2 have been fixed. In particular, there are now new functions
gfc_mpz_get_hwi and gfc_mpz_set_hwi, similar to the GMP functions
mpz_get_si and mpz_set_si, except that they get/set a HOST_WIDE_INT
instead of a long value. Similarly, gfc_get_int_expr now takes a
HOST_WIDE_INT instead of a long, gfc_extract_long is replaced by
gfc_extract_hwi. Also, the preliminary work to handle
gfc_charlen_type_node being unsigned has been removed.
Regtested on x86_64-pc-linux-gnu.
frontend:
2017-01-03 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* class.c (gfc_find_derived_vtab): Use gfc_size_kind instead of
hardcoded kind.
(find_intrinsic_vtab): Likewise.
* expr.c (gfc_get_character_expr): Length parameter of type
gfc_charlen_t.
(gfc_get_int_expr): Value argument of type HOST_WIDE_INT.
(gfc_extract_hwi): New function.
(simplify_const_ref): Make string_len of type gfc_charlen_t.
(gfc_simplify_expr): Use HOST_WIDE_INT for substring refs.
* gfortran.h (gfc_mpz_get_hwi): New prototype.
(gfc_mpz_set_hwi): Likewise.
(gfc_charlen_t): New typedef.
(gfc_expr): Use gfc_charlen_t for character lengths.
(gfc_size_kind): New extern variable.
(gfc_extract_hwi): New prototype.
(gfc_get_character_expr): Use gfc_charlen_t for character length.
(gfc_get_int_expr): Use HOST_WIDE_INT type for value argument.
* iresolve.c (gfc_resolve_repeat): Pass string length directly without
temporary, use gfc_charlen_int_kind.
* match.c (select_intrinsic_set_tmp): Use HOST_WIDE_INT for charlen.
* misc.c (gfc_mpz_get_hwi): New function.
(gfc_mpz_set_hwi): New function.
* module.c (atom_int): Change type from int to HOST_WIDE_INT.
(parse_integer): Don't complain about large integers.
(write_atom): Use HOST_WIDE_INT for integers.
(mio_integer): Handle integer type mismatch.
(mio_hwi): New function.
(mio_intrinsic_op): Use HOST_WIDE_INT.
(mio_array_ref): Likewise.
(mio_expr): Likewise.
* resolve.c (resolve_select_type): Use HOST_WIDE_INT for charlen,
use snprintf.
(resolve_charlen): Use mpz_sgn to determine sign.
* simplify.c (gfc_simplify_repeat): Use HOST_WIDE_INT/gfc_charlen_t
instead of long.
* target-memory.c (size_character): Length argument of type
gfc_charlen_t.
(gfc_encode_character): Likewise.
(gfc_interpret_character): Use gfc_charlen_t.
* target-memory.h (gfc_encode_character): Modify prototype.
* trans-array.c (get_array_ctor_var_strlen): Use
gfc_conv_mpz_to_tree_type.
* trans-const.c (gfc_conv_mpz_to_tree_type): New function.
* trans-const.h (gfc_conv_mpz_to_tree_type): New prototype.
* trans-expr.c (gfc_class_len_or_zero_get): Build const of type
gfc_charlen_type_node.
(gfc_conv_intrinsic_to_class): Use gfc_charlen_int_kind instead of
4, fold_convert to correct type.
(gfc_conv_class_to_class): Build const of type size_type_node for
size.
(gfc_copy_class_to_class): Likewise.
(gfc_conv_string_length): Use same type in expression.
(gfc_conv_substring): Likewise, use HOST_WIDE_INT for charlen.
(gfc_conv_string_tmp): Make sure len is of the right type.
(gfc_conv_concat_op): Use same type in expression.
(gfc_conv_procedure_call): Likewise.
(alloc_scalar_allocatable_for_subcomponent_assignment):
fold_convert to right type.
(gfc_trans_subcomponent_assign): Likewise.
(trans_class_vptr_len_assignment): Build const of correct type.
(gfc_trans_pointer_assignment): Likewise.
(alloc_scalar_allocatable_for_assignment): fold_convert to right
type in expr.
(trans_class_assignment): Build const of correct type.
* trans-intrinsic.c (gfc_conv_associated): Likewise.
(gfc_conv_intrinsic_repeat): Do calculation in sizetype.
* trans-io.c (gfc_build_io_library_fndecls): Use
gfc_charlen_type_node for character lengths.
* trans-stmt.c (gfc_trans_label_assign): Build const of
gfc_charlen_type_node.
(gfc_trans_character_select): Likewise.
(gfc_trans_allocate): Likewise, don't typecast strlen result.
(gfc_trans_deallocate): Don't typecast strlen result.
* trans-types.c (gfc_size_kind): New variable.
(gfc_init_types): Determine gfc_charlen_int_kind and gfc_size_kind
from size_type_node.
testsuite:
2017-01-03 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* gfortran.dg/dependency_49.f90: Change scan-tree-dump-times
due to gfc_trans_string_copy change to avoid
-Wstringop-overflow.
* gfortran.dg/repeat_4.f90: Use integers of kind C_SIZE_T.
* gfortran.dg/repeat_7.f90: New test for PR 66310.
* gfortran.dg/scan_2.f90: Handle potential cast in assignment.
* gfortran.dg/string_1.f90: Limit to ilp32 targets.
* gfortran.dg/string_1_lp64.f90: New test.
* gfortran.dg/string_3.f90: Limit to ilp32 targets.
* gfortran.dg/string_3_lp64.f90: New test.
* gfortran.dg/transfer_intrinsic_1.f90: Change
scan-tree-dump-times due to gfc_trans_string_copy change to
avoid -Wstringop-overflow.
libgfortran:
2017-01-03 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
* intrinsics/args.c (getarg_i4): Use gfc_charlen_type.
(get_command_argument_i4): Likewise.
(get_command_i4): Likewise.
* intrinsics/chmod.c (chmod_internal): Likewise.
* intrinsics/env.c (get_environment_variable_i4): Likewise.
* intrinsics/extends_type_of.c (struct vtype): Use size_t for size
member.
* intrinsics/gerror.c (gerror): Use gfc_charlen_type.
* intrinsics/getlog.c (getlog): Likewise.
* intrinsics/hostnm.c (hostnm_0): Likewise.
* intrinsics/string_intrinsics_inc.c (string_len_trim): Rework to
work if gfc_charlen_type is unsigned.
(string_scan): Likewise.
* io/transfer.c (transfer_character): Modify prototype.
(transfer_character_write): Likewise.
(transfer_character_wide): Likewise.
(transfer_character_wide_write): Likewise.
(transfer_array): Typecast to avoid signed-unsigned comparison.
* io/unit.c (is_trim_ok): Use gfc_charlen_type.
* io/write.c (namelist_write): Likewise.
* libgfortran.h (gfc_charlen_type): Change typedef to size_t.
From-SVN: r244011
* gfortran.map: Move all _gfortran_* __iso_c_binding_* symbols
to GFORTRAN_7. Rename F2C_1.0 to GFORTRAN_F2C_7. Move all C99
compatibility symbols to GFORTRAN_C99_7.
From-SVN: r243839
2016-12-19 Janne Blomqvist <jb@gcc.gnu.org>
* Actually remove files that should have been removed by r243799.
This line, and those below, will be ignored--
M libgfortran/ChangeLog
D libgfortran/generated/exponent_r10.c
D libgfortran/generated/exponent_r16.c
D libgfortran/generated/exponent_r4.c
D libgfortran/generated/exponent_r8.c
D libgfortran/generated/fraction_r10.c
D libgfortran/generated/fraction_r16.c
D libgfortran/generated/fraction_r4.c
D libgfortran/generated/fraction_r8.c
D libgfortran/generated/nearest_r10.c
D libgfortran/generated/nearest_r16.c
D libgfortran/generated/nearest_r4.c
D libgfortran/generated/nearest_r8.c
D libgfortran/generated/rrspacing_r10.c
D libgfortran/generated/rrspacing_r16.c
D libgfortran/generated/rrspacing_r4.c
D libgfortran/generated/rrspacing_r8.c
D libgfortran/generated/set_exponent_r10.c
D libgfortran/generated/set_exponent_r16.c
D libgfortran/generated/set_exponent_r4.c
D libgfortran/generated/set_exponent_r8.c
D libgfortran/generated/spacing_r10.c
D libgfortran/generated/spacing_r16.c
D libgfortran/generated/spacing_r4.c
D libgfortran/generated/spacing_r8.c
D libgfortran/generated/transpose_c10.c
D libgfortran/generated/transpose_c16.c
D libgfortran/generated/transpose_c4.c
D libgfortran/generated/transpose_c8.c
D libgfortran/generated/transpose_i16.c
D libgfortran/generated/transpose_i4.c
D libgfortran/generated/transpose_i8.c
D libgfortran/generated/transpose_r10.c
D libgfortran/generated/transpose_r16.c
D libgfortran/generated/transpose_r4.c
D libgfortran/generated/transpose_r8.c
D libgfortran/intrinsics/malloc.c
D libgfortran/intrinsics/transpose_generic.c
D libgfortran/m4/exponent.m4
D libgfortran/m4/fraction.m4
D libgfortran/m4/nearest.m4
D libgfortran/m4/rrspacing.m4
D libgfortran/m4/set_exponent.m4
D libgfortran/m4/spacing.m4
D libgfortran/m4/transpose.m4
From-SVN: r243804
2016-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/78622
* io.c (format_lex): Continue of string delimiter seen.
* io/transfer.c (get_dt_format): New static function to alloc
and set the DT iotype string, handling doubled quotes.
(formatted_transfer_scalar_read,
formatted_transfer_scalar_write): Use new function.
* gfortran.dg/dtio_20.f03: New test.
From-SVN: r243765
libgfortran/ChangeLog:
2016-11-30 Andre Vehreschild <vehre@gcc.gnu.org>
* caf/libcaf.h: Add new action types for (de-)registration of
allocatable components in derived type coarrays. Add _caf_is_present
prototype.
* caf/single.c (_gfortran_caf_register): Add support for registration
only and allocation of already registered allocatable components in
derived type coarrays.
(_gfortran_caf_deregister): Add mode to deallocate but not deregister
an allocatable component in a derived type coarray.
(_gfortran_caf_is_present): New function. Query whether an
allocatable component in a derived type coarray on a remote image is
allocated.
gcc/testsuite/ChangeLog:
2016-11-30 Andre Vehreschild <vehre@gcc.gnu.org>
* gfortran.dg/coarray/alloc_comp_1.f90: Fix tree-dump scans to adhere
to the changed interfaces.
* gfortran.dg/coarray_alloc_comp_1.f08: Likewise.
* gfortran.dg/coarray_allocate_7.f08: Likewise.
* gfortran.dg/coarray_lib_alloc_1.f90: Likewise.
* gfortran.dg/coarray_lib_alloc_2.f90: Likewise.
* gfortran.dg/coarray_lib_alloc_3.f90: Likewise.
* gfortran.dg/coarray_lib_comm_1.f90: Likewise.
* gfortran.dg/coarray_lib_alloc_4.f90: New test.
gcc/fortran/ChangeLog:
2016-11-30 Andre Vehreschild <vehre@gcc.gnu.org>
* check.c (gfc_check_allocated): By pass the caf_get call and check on
the array.
* gfortran.h: Add optional flag to gfc_caf_attr.
* gfortran.texi: Document new enum values and _caf_is_present function.
* primary.c (caf_variable_attr): Add optional flag to indicate that the
expression is reffing a component.
(gfc_caf_attr): Likewise.
* trans-array.c (gfc_array_deallocate): Handle deallocation mode for
coarray deregistration.
(gfc_trans_dealloc_allocated): Likewise.
(duplicate_allocatable): Use constants instead of
creating custom constant tree node of zero or one. Use gfc_add_modify
convenience function.
(duplicate_allocatable_coarray): This function is similar to
duplicate_allocatable but tailored to handle coarrays.
(caf_enabled): Check whether in-derived-type coarray processing is
enabled.
(caf_in_coarray): Check that in-derived-type coarray processing is
enabled and currently in a derived-typed coarray.
(gfc_caf_is_dealloc_only): Return true, when deallocate only is
desired for components in derived typed coarrays.
(structure_alloc_comps): A mode for handling coarrays, that is no
longer encode in the purpose. This makes the use cases of the
routine more flexible without repeating. Allocatable components in
derived type coarrays are now registered only when nullifying an
object and allocated before copying data into them.
(gfc_nullify_alloc_comp): Use the caf_mode of structure_alloc_comps
now.
(gfc_deallocate_alloc_comp): Likewise.
(gfc_deallocate_alloc_comp_no_caf): Likewise.
(gfc_reassign_alloc_comp_caf): Likewise.
(gfc_copy_alloc_comp): Likewise.
(gfc_copy_only_alloc_comp): Likewise.
(gfc_alloc_allocatable_for_assignment): Make use to the cheaper way of
reallocating a coarray without deregistering and reregistering it.
(gfc_trans_deferred_array): Initialize the coarray token correctly for
deferred variables and tear them down on exit.
* trans-array.h: Change some prototypes to add the coarray (de-)
registration modes. Add prototype for checking if deallocate only is
selected for components in derived typed coarrays.
* trans-decl.c (gfc_build_builtin_function_decls): Generate the
declarations for the changed/new caf-lib routines.
(gfc_trans_deferred_vars): Ensure deferred variables are (de-)
registered correctly on procedure entry/exit.
(generate_coarray_sym_init): Use constants.
* trans-expr.c (gfc_conv_procedure_call): Propagate coarray allocation
modes accordingly.
(gfc_trans_alloc_subarray_assign): Likewise.
(gfc_trans_subcomponent_assign): Likewise.
(gfc_trans_structure_assign): Generate code to register the components
of a derived type coarray prior to initialization.
(gfc_conv_structure): Set flag that the structure is in a coarray.
(gfc_trans_scalar_assign): Add flag to indicate being in a coarray and
set the structure_alloc_comps modes correctly.
(gfc_trans_assignment_1): Figure being in a coarray expression.
* trans-intrinsic.c (gfc_conv_intrinsic_caf_get): Adapt to new
structure_alloc_comps interface.
(conv_caf_send): Use the old API as long as possible.
(trans_caf_is_present): Generate code to check whether an allocatable
component in a derived typed coarray is allocated on a remote image.
(caf_this_image_ref): Return true, when only reffing this image.
(gfc_conv_allocated): Convert allocated queries on allocatable
components to the library API.
(conv_intrinsic_move_alloc): Adapt to new interface of
structure_alloc_comps.
* trans-openmp.c (gfc_walk_alloc_comps): Likewise.
(gfc_omp_clause_assign_op): Likewise.
(gfc_omp_clause_dtor): Likewise.
* trans-stmt.c (gfc_trans_deallocate): Figure which mode to use when
deallocating allocatable components in derived type coarras.
* trans.c (gfc_allocate_using_lib): Renamed to
gfc_allcate_using_caf_lib.
(gfc_allocate_allocatable): Set the registration mode/type of caf-
register calls adapting to all the possible allocatable objects.
(gfc_deallocate_with_status): Add deregistration mode for allocatable
components in derived type coarrays.
(gfc_deallocate_scalar_with_status): Likewise.
* trans.h (enum gfc_coarray_type): Renamed to gfc_coarray_regtype to
avoid collision with gfc_coarray_deregtype.
From-SVN: r243021
ieee_support_halting only checked the availability of status
flags, not trapping support. On some targets the later can
only be checked at runtime: feenableexcept reports if
enabling traps failed.
So check trapping support by enabling/disabling it.
Updated the test that enabled trapping to check if it is
supported.
gcc/testsuite/
PR libgfortran/78314
* gfortran.dg/ieee/ieee_6.f90: Use ieee_support_halting.
libgfortran/
PR libgfortran/78314
* config/fpu-glibc.h (support_fpu_trap): Use feenableexcept.
From-SVN: r242505
2016-10-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/54679
* io.c (check_format): Adjust checks for FMT_L to treat a zero
width as an extension, giving warnings or error as appropriate.
Improve messages.
PR libgfortran/54679
* io/format.c (parse_format_list): Adjust checks for FMT_L to
treat a zero width as an extension, giving warnings or error
as appropriate. Improve messages.
PR fortran/54679
* gfortran.dg/fmt_l.f90: Update test.
* gfortran.dg/fmt_l0.f90: New test.
From-SVN: r241720
2016-10-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/78123
* io/transfer.c (formatted_transfer_scalar_read): Clear seen_eor
only if we have tabbed to left of current position.
* gfortran.dg/fmt_t_9.f: New test.
From-SVN: r241691
2016-10-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/77828
* io/io.h (st_parameter_dt): Reorder for readability and sanity.
* io/transfer.c (data_transfer_init): Remove TODO and enable the
runtime error message, rec= specifier not allowed in STREAM
access.
* libtool-version: Bump major version of libgfortran to 4.
* ioparm.def: Reorder dt parameters to match libgfortran.
* libgfortran.h: Swap definitions of GFC_INTERNAL_UNIT and
GFC_INTERNAL_UNIT4.
From-SVN: r241497
2016-10-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (finalize_transfer): Free format data in child
procedures. (st_read_done, st_write_done): Don't free format
hash table.
From-SVN: r241392
2016-10-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* io/io.h: Move size_used from dtp to unit structure. Add bool
has_size to unit structure.
* read.c (read_x): Use has_size and size_used.
* transfer.c (read_sf_internal,read_sf,read_block_form,
read_block_form4): Likewise.
(data_transfer_init): If parent, initialize the size variables.
(finalize_transfer): Set the size variable using size_used in
gfc_unit. (write_block): Delete bogus/dead code.
* gfortran.dg/dtio_17.f90: New test.
From-SVN: r241294
Improve error message, and remove a redundant check, as the same check is
done a bit earlier due to the PR 48587 patch.
2016-10-16 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/48587
* io/transfer.c (data_transfer_init): Improve error message,
remove redundant check.
Regtested on x86_64-pc-linux-gnu.
From-SVN: r241211
Currently GFortran newer reuses unit numbers allocated with NEWUNIT=,
instead having a simple counter that is decremented each time such a
unit is opened. For a long running program which repeatedly opens
files with NEWUNIT= and closes them, the counter can wrap around and
cause an abort. This patch replaces the counter with an allocator
that keeps track of which units numbers are allocated, and can reuse
them once they have been deallocated. Since operating systems tend to
limit the number of simultaneous open files for a process to a
relatively modest number, a relatively simple approach with a linear
scan through an array suffices. Though as a small optimization there
is a low water indicator keeping track of the index for which all unit
numbers below are already allocated. This linear scan also ensures
that we always allocate the smallest available unit number.
2016-10-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/48587
* io/io.h (get_unique_unit_number): Remove prototype.
(newunit_alloc): New prototype.
* io/open.c (st_open): Call newunit_alloc.
* io/unit.c (newunits,newunit_size,newunit_lwi): New static
variables.
(GFC_FIRST_NEWUNIT): Rename to NEWUNIT_START.
(next_available_newunit): Remove variable.
(get_unit): Call newunit_alloc, don't try to create negative
external unit.
(close_unit_1): Call newunit_free.
(close_units): Free newunits array.
(get_unique_number): Remove function.
(newunit_alloc): New function.
(newunit_free): New function.
* io/transfer.c (data_transfer_init): Check for invalid unit
number.
testsuite ChangeLog:
2016-10-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/48587
* gfortran.dg/negative_unit2.f90: New testcase.
From-SVN: r241199
Many POSIX systems have the bad habit of not restarting interrupted
syscalls. On these systems it's up to the user to check for an error
with errno == EINTR and restart manually. This patch does this for
libgfortran, so that GFortran users don't have to do it.
2016-10-09 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/67585
* io/io.h: TEMP_FAILURE_RETRY: Define macro if not found.
* io/unix.c (raw_read): Handle EINTR.
(raw_write): Check for return value -1.
(raw_seek): Handle EINTR.
(raw_tell): Likewise.
(raw_size): Likewise.
(raw_truncate): Likewise.
(raw_close): Likewise.
(buf_flush): Call raw_seek instead of lseek.
(buf_read): Likewise.
(buf_write): Likewise.
(fd_to_stream): Handle EINTR.
(tempfile_open): Likewise.
(regular_file2): Likewise.
(compare_file_filename): Likewise.
(find_file): Likewise.
(inquire_sequential): Likewise.
(inquire_direct): Likewise.
(inquire_formatted): Likewise.
From-SVN: r240902
gcc/testsuite/ChangeLog:
2016-10-01 Andre Vehreschild <vehre@gcc.gnu.org>
PR fortran/77663
* gfortran.dg/coarray_send_by_ref_1.f08: New test.
libgfortran/ChangeLog:
2016-10-01 Andre Vehreschild <vehre@gcc.gnu.org>
PR fortran/77663
* caf/single.c (caf_internal_error): Fix not terminating va-list.
(_gfortran_caf_register): Free memory also when other allocs failed.
(_gfortran_caf_get_by_ref): Fixed style.
(send_by_ref): Token is now stored at the correct position preventing
inaccessible tokens, memory loss and possibly crashes.
From-SVN: r240695
2016-09-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/48298
* io/inquire.c (inquire_via_unit): Adjust error check for the
two possible internal unit KINDs.
* io/io.h: Adjust defines for is_internal_unit and
is_char4_unit. (gfc_unit): Add internal unit data to structure.
(get_internal_unit): Change declaration to set_internal_unit.
(free_internal_unit): Change name to stash_internal_unit_number.
(get_unique_unit_number): Adjust parameter argument.
Define IOPARM_DT_HAS_UDTIO. (gfc_saved_unit): New structure.
* io/list_read.c (next_char_internal): Use is_char4_unit.
* io/open.c (st_open): Adjust call to get_unique_unit_number.
* io/transfer.c (write_block): Use is_char4_unit.
(data_transfer_init): Update check for unit numbers.
(st_read_done): Free the various allocated memories used for the
internal units and stash the negative unit number and pointer to unit
structure to allow reuse. (st_write_done): Likewise stash the freed
unit.
* io/unit.c: Create a fixed size buffer of 16 gfc_saved_unit's to use
as a stack to save newunit unit numbers and unit structure for reuse.
(get_external_unit): Change name to get_gfc_unit to better
reflect what it does. (find_unit): Change call to get_gfc_unit.
(find_or_create_unit): Likewise. (get_internal_unit): Change
name to set_internal_unit. Move internal unit from the dtp
structure to the gfc_unit structure so that it can be passed to
child I/O statements through the UNIT.
(free_internal_unit): Change name to stash_internal_unit_number.
Push the common.unit number onto the newunit stack, saving it
for possible reuse later. (get_unit): Set the internal unit
KIND. Use get_unique_unit_number to get a negative unit number
for the internal unit. Use get_gfc_unit to get the unit structure
and use set_internal_unit to initialize it.
(init_units): Initialize the newunit stack.
(get_unique_unit_number): Check the stack for an available unit
number and use it. If none there get the next most negative
number. (close_units): Free any unit structures pointed to from the save
stack.
2016-09-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* gfortran.h (gfc_dt): Add *udtio.
* ioparm.def: Add bit IOPARM_dt_f2003 to align with library use of bit
25. Add IOPARM_dt_dtio bit to common flags.
* resolve.c (resolve_transfer): Set dt->udtio to expression.
* io.c (gfc_match_inquire): Adjust error message for internal
unit KIND.
* libgfortran.h: Adjust defines for GFC_INTERNAL_UNIT4,
GFC_INTERNAL_UNIT, and GFC_INVALID_UNIT.
* trans-io.c (build_dt): Set common_unit to reflect the KIND of
the internal unit. Set mask bit for presence of dt->udtio.
2016-09-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* gfortran.dg/negative_unit_check.f90: Update test.
* gfortran.dg/dtio_14.f90: New test.
From-SVN: r240456
2016-09-21 Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics/random.c (getosrandom): Use rand_s() on
MinGW-w64. Fix bounds overflow in fallback code.
From-SVN: r240309
libgfortran/ChangeLog:
2016-09-19 Andre Vehreschild <vehre@gcc.gnu.org>
* caf/libcaf.h: Add caf_reference_type.
* caf/mpi.c: Adapted signature of caf_register().
* caf/single.c (struct caf_single_token): Added to keep the pointer
to the memory registered and array descriptor.
(caf_internal_error): Added convenience interface.
(_gfortran_caf_register): Adapted to work with caf_single_token and
return memory in the array descriptor.
(_gfortran_caf_deregister): Same.
(assign_char1_from_char4): Fixed style.
(convert_type): Fixed incorrect conversion.
(_gfortran_caf_get): Adapted to work with caf_single_token.
(_gfortran_caf_send): Same.
(_gfortran_caf_sendget): Same.
(copy_data): Added to stop repeating it in all _by_ref functions.
(get_for_ref): Recursive getting of coarray data using a chain of
references.
(_gfortran_caf_get_by_ref): Driver for computing the memory needed for
the get and checking properties of the operation.
(send_by_ref): Same as get_for_ref but for sending data.
(_gfortran_caf_send_by_ref): Same like caf_get_by_ref but for sending.
(_gfortran_caf_sendget_by_ref): Uses get_by_ref and send_by_ref to
implement sendget for reference chains.
(_gfortran_caf_atomic_define): Adapted to work with caf_single_token.
(_gfortran_caf_atomic_ref): Likewise.
(_gfortran_caf_atomic_cas): Likewise.
(_gfortran_caf_atomic_op): Likewise.
(_gfortran_caf_event_post): Likewise.
(_gfortran_caf_event_wait): Likewise.
(_gfortran_caf_event_query): Likewise.
(_gfortran_caf_lock): Likewise.
(_gfortran_caf_unlock): Likewise.
gcc/testsuite/ChangeLog:
2016-09-19 Andre Vehreschild <vehre@gcc.gnu.org>
* gfortran.dg/coarray/alloc_comp_4.f90: New test.
* gfortran.dg/coarray_38.f90:
* gfortran.dg/coarray_alloc_comp_1.f08: New test.
* gfortran.dg/coarray_alloc_comp_2.f08: New test.
* gfortran.dg/coarray_allocate_7.f08: New test.
* gfortran.dg/coarray_allocate_8.f08: New test.
* gfortran.dg/coarray_allocate_9.f08: New test.
* gfortran.dg/coarray_lib_alloc_1.f90: Adapted scan-tree-dumps to expect
new caf_register.
* gfortran.dg/coarray_lib_alloc_2.f90: Same.
* gfortran.dg/coarray_lib_alloc_3.f90: Same.
* gfortran.dg/coarray_lib_comm_1.f90: Adapted scan-tree-dumps to expect
get_by_refs.
* gfortran.dg/coarray_lib_token_3.f90: Same as for coarray_lib_alloc2.
* gfortran.dg/coarray_lock_7.f90: Same.
* gfortran.dg/coarray_poly_5.f90: Same.
* gfortran.dg/coarray_poly_6.f90: Same.
* gfortran.dg/coarray_poly_7.f90: Same.
* gfortran.dg/coarray_poly_8.f90: Same.
* gfortran.dg/coindexed_1.f90: Changed errors expected.
gcc/fortran/ChangeLog:
2016-09-19 Andre Vehreschild <vehre@gcc.gnu.org>
* expr.c (gfc_check_assign): Added flag to control whether datatype
conversion is allowed.
* gfortran.h: Added caf-token-tree to gfc_component. Changed
prototypes mostly to add whether datatype conversion is allowed.
* gfortran.texi: Added documentation for the caf_reference_t and the
caf_*_by_ref function.
* primary.c (caf_variable_attr): Similar to gfc_variable_attr but
focused on the needs of coarrays.
(gfc_caf_attr): Same.
* resolve.c (resolve_ordinary_assign): Set the conversion allowed
flag when not in a coarray.
* trans-array.c (gfc_array_init_size): Moved setting of array
descriptor's datatype before the alloc, because caf_register needs it.
(gfc_array_allocate): Changed notion of whether an array is a coarray.
(gfc_array_deallocate): Same.
(gfc_alloc_allocatable_for_assignment): Added setting of coarray's
array descriptor datatype before the register. And using deregister/
register to mimmick a realloc for coarrays.
* trans-decl.c (gfc_build_builtin_function_decls): Corrected signatures
of old caf-functions and added signature definitions of the _by_ref
ones.
(generate_coarray_sym_init): Adapted to new caf_register signature.
* trans-expr.c (gfc_conv_scalar_to_descriptor): Make sure a constant
is translated to an lvalue expression before use in an array
descriptor.
(gfc_get_ultimate_alloc_ptr_comps_caf_token): New function. Get the
last allocatable component's coarray token.
(gfc_get_tree_for_caf_expr): For top-level object get the coarray
token and check for unsupported features.
(gfc_get_caf_token_offset): Getting the offset might procude new
statements, which now are stored in the pre and post of the current se.
(gfc_caf_get_image_index): For this image return a call to
caf_this_image.
(expr_may_alias_variables): Check that the result is set for testing
its properties.
(alloc_scalar_allocatable_for_assignment): Added auto allocation of
coarray components.
(gfc_trans_assignment_1): Rewrite an assign to a coarray object to
be a sendget.
* trans-intrinsic.c (conv_caf_vector_subscript_elem): Corrected
wrong comment.
(compute_component_offset): Compute the correct offset a structure
member.
(conv_expr_ref_to_caf_ref): Convert to a chain of refs into
caf_references.
(gfc_conv_intrinsic_caf_get): Call caf_get_by_ref instead of caf_get.
(conv_caf_send): Call caf_*_by_ref for coarrays that need
reallocation.
(gfc_conv_intrinsic_function): Adapted to new signuature of the caf
drivers.
(conv_intrinsic_atomic_op): Add pre and post statements correctly.
(conv_intrinsic_atomic_ref): Same.
(conv_intrinsic_atomic_cas): Same.
(conv_intrinsic_event_query): Same.
* trans-stmt.c (gfc_trans_lock_unlock): Same.
(gfc_trans_event_post_wait): Same.
(gfc_trans_allocate): Support allocation of allocatable coarrays.
(gfc_trans_deallocate): And there deallocation.
* trans-types.c (gfc_typenode_for_spec): Added flag to control whether
a component is part of coarray. When so, then add space to store a
coarray token.
(gfc_build_array_type): Same.
(gfc_get_array_descriptor_base): Same.
(gfc_get_array_type_bounds): Same.
(gfc_sym_type): Same.
(gfc_get_derived_type): Same.
(gfc_get_caf_reference_type): Declare the caf_reference_type.
* trans-types.h: Prototype changes only.
* trans.c (gfc_allocate_using_lib): Use the updated caf_register
signature.
(gfc_allocate_allocatable): Same.
(gfc_deallocate_with_status): Same.
* trans.h: Defined the runtime types for caf_reference_t and the enums.
From-SVN: r240231
2016-09-09 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/77507
* intrinsic.c (add_functions): Use correct keyword.
2016-09-09 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/77507
* ieee/ieee_arithmetic.F90 (IEEE_VALUE_4,IEEE_VALUE_8,IEEE_VALULE_10,
IEEE_VALUE_16): Use correct keyword.
2016-09-09 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/77507
* gfortran.dg/pr77507.f90: New test.
From-SVN: r240050
2016-09-06 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/77393
* io/write_float.def (build_float_string): Recognize when the
result will not fit in the user provided, star fill, and exit
early.
* gfortran.dg/fmt_f0_2.f90: Update test.
* gfortran.dg/fmt_f0_3.f90: New test.
From-SVN: r240018
2016-08-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/77393
* io/write.c (kind_from_size): New function to calculate required buffer
size based on kind type. (select_buffer, select_string): Use new
function. (write_float_0, write_real, write_real_g0, write_complex):
Adjust calls to pass parameters needed by new function.
From-SVN: r239900
2016-08-31 Paul Thomas <pault@gcc.gnu.org>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* decl.c (access_attr_decl): Include case INTERFACE_DTIO as
appropriate.
* gfortran.h : Add INTRINSIC_FORMATTED and
INTRINSIC_UNFORMATTED to gfc_intrinsic_op. Add INTERFACE_DTIO
to interface type. Add new enum 'dtio_codes'. Add bitfield
'has_dtio_procs' to symbol_attr. Add prototypes
'gfc_check_dtio_interfaces' and 'gfc_find_specific_dtio_proc'.
* interface.c (dtio_op): New function.
(gfc_match_generic_spec): Match generic DTIO interfaces.
(gfc_match_interface): Treat DTIO interfaces in the same way as
(gfc_current_interface_head): Add INTERFACE_DTIO appropriately.
(check_dtio_arg_TKR_intent): New function.
(check_dtio_interface1): New function.
(gfc_check_dtio_interfaces): New function.
(gfc_find_specific_dtio_proc): New function.
* io.c : Add FMT_DT to format_token.
(format_lex): Handle DTIO formatting.
* match.c (gfc_op2string): Add DTIO operators.
* resolve.c (derived_inaccessible): Ignore pointer components
to enclosing derived type.
(resolve_transfer): Resolve transfers that involve DTIO.
procedures. Find the specific subroutine for the transfer and
use its existence to over-ride some of the constraints on
derived types. If the transfer is recursive, require that the
subroutine be so qualified.
(dtio_procs_present): New function.
(resolve_fl_namelist): Remove inhibition of polymorphic objects
in namelists if DTIO read and write subroutines exist. Likewise
for derived types.
(resolve_types): Invoke 'gfc_verify_dtio_procedures'.
* symbol.c : Set 'dtio_procs' using 'minit'.
* trans-decl.c (gfc_finish_var_decl): If a derived-type/class
object is associated with DTIO procedures, make it TREE_STATIC.
* trans-expr.c (gfc_get_vptr_from_expr): If the expression
drills down to a PARM_DECL, extract the vptr correctly.
(gfc_conv_derived_to_class): Check 'info' in the test for
'useflags'. If the se expression exists and is a pointer, use
it as the class _data.
* trans-io.c : Add IOCALL_X_DERIVED to iocall and the function
prototype. Likewise for IOCALL_SET_NML_DTIO_VAL.
(set_parameter_tree): Renamed from 'set_parameter_const', now
returns void and has new tree argument. Calls modified to match
new interface.
(transfer_namelist_element): Transfer DTIO procedure pointer
and vpointer using the new function IOCALL_SET_NML_DTIO_VAL.
(get_dtio_proc): New function.
(transfer_expr): Add new argument for the vptr field of class
objects. Add the code to call the specific DTIO proc, convert
derived types to class and call IOCALL_X_DERIVED.
(trans_transfer): Add BT_CLASS to structures for treatment by
the scalarizer. Obtain the vptr for the dynamic type, both for
scalar and array transfer.
2016-08-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Paul Thomas <pault@gcc.gnu.org>
PR libgfortran/48298
* gfortran.map : Flag _st_set_nml_dtio_var and
_gfortran_transfer_derived.
* io/format.c (format_lex): Detect DTIO formatting.
(parse_format_list): Parse the DTIO format.
(next_format): Include FMT_DT.
* io/format.h : Likewise. Add structure 'udf' to structure
'fnode' to carry the IOTYPE string and the 'vlist'.
* io/io.h : Add prototypes for the two types of DTIO subroutine
and a typedef for gfc_class. Also, add to 'namelist_type'
fields for the pointer to the DTIO procedure and the vtable.
Add fields to struct st_parameter_dt for pointers to the two
types of DTIO subroutine. Add to gfc_unit DTIO specific fields.
(internal_proto): Add prototype for 'read_user_defined' and
'write_user_defined'.
* io/list_read.c (check_buffers): Use the 'current_unit' field.
(unget_char): Likewise.
(eat_spaces): Likewise.
(list_formatted_read_scalar): For case BT_CLASS, call the DTIO
procedure.
(nml_get_obj_data): Likewise when DTIO procedure is present,.
* io/transfer.c : Export prototypes for 'transfer_derived' and
'transfer_derived_write'.
(unformatted_read): For case BT_CLASS, call the DTIO procedure.
(unformatted_write): Likewise.
(formatted_transfer_scalar_read): Likewise.
(formatted_transfer_scalar_write: Likewise.
(transfer_derived): New function.
(data_transfer_init): Set last_char if no child_dtio.
(finalize_transfer): Return if child_dtio set.
(st_write_done): Add condition for child_dtio not set.
Add extra arguments for st_set_nml_var prototype.
(set_nml_var): New function that contains the contents of the
old version of st_set_nml_var. Also sets the 'dtio_sub' and
'vtable' fields of the 'nml' structure.
(st_set_nml_var): Now just calls set_nml_var with 'dtio_sub'
and 'vtable' NULL.
(st_set_nml_dtio_var): New function that calls set_nml_var.
* io/unit.c (get_external_unit): If the found unit child_dtio
is non zero, don't do any mutex locking/unlocking. Just
return the unit.
* io/unix.c (tempfile_open): Revert to C style comment.
* io/write.c (list_formatted_write_scalar): Do the DTIO call.
(nml_write_obj): Add BT_CLASS and do the DTIO call.
2016-08-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Paul Thomas <pault@gcc.gnu.org>
PR fortran/48298
* gfortran.dg/dtio_1.f90: New test.
* gfortran.dg/dtio_2.f90: New test.
* gfortran.dg/dtio_3.f90: New test.
* gfortran.dg/dtio_4.f90: New test.
* gfortran.dg/dtio_5.f90: New test.
* gfortran.dg/dtio_6.f90: New test.
* gfortran.dg/dtio_7.f90: New test.
* gfortran.dg/dtio_8.f90: New test.
* gfortran.dg/dtio_9.f90: New test.
* gfortran.dg/dtio_10.f90: New test.
From-SVN: r239880
libgfortran:
2016-08-19 Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics/random.c (xor_keys): New array with "secret" keys.
(scramble_seed): XOR given seed with xor_keys array rather than
shuffling bytes.
(unscramble_seed): Remove function.
(random_seed_i4): Use new scramble_seed.
(random_seed_i8): Likewise.
frontend:
2016-08-19 Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics.texi (RANDOM_NUMBER): Remove reference to
init_random_seed in example.
(RANDOM_SEED): Remove warning to not set all seed values to 0.
From-SVN: r239613
libgfortran:
2016-08-16 Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics/random.c (master_init): New variable.
(init_rand_state): Move below getosrandom (), maybe initialize
master_state.
(random_seed_i4): If called with no arguments, set master_init to
false, and reinitialize. If called with PUT=, set master_init to
true.
(random_seed_i8): Likewise.
testsuite:
2016-08-16 Janne Blomqvist <jb@gcc.gnu.org>
* gfortran.dg/random_4.f90: Initialize seed before using, handle
the last special seed value.
* gfortran.dg/random_7.f90: Use size for last array member instead
of hardcoded value.
From-SVN: r239611
frontend:
2016-08-11 Janne Blomqvist <jb@gcc.gnu.org>
* check.c (gfc_check_random_seed): Use new seed size in check.
* intrinsic.texi (RANDOM_NUMBER): Updated documentation.
(RANDOM_SEED): Likewise.
testsuite:
2016-08-11 Janne Blomqvist <jb@gcc.gnu.org>
* gfortran.dg/random_7.f90: Take into account that the last seed
value is the special p value.
* gfortran.dg/random_seed_1.f90: Seed size is now constant.
libgfortran:
2016-08-11 Janne Blomqvist <jb@gcc.gnu.org>
* intrinsics/random.c: Replace KISS with xorshift1024* using
per-thread state.
* runtime/main.c (init): Don't call random_seed_i4.
From-SVN: r239356
libgfortran/ChangeLog:
2016-07-22 Andre Vehreschild <vehre@gcc.gnu.org>
* caf/libcaf.h: Add parameter stat to caf_get() and
caf_send()'s function prototypes.
* caf/single.c (_gfortran_caf_get): Implement reporting
error using stat instead of abort().
(_gfortran_caf_send): Same.
(_gfortran_caf_sendget): Use NULL for stat when calling
caf_send().
gcc/testsuite/ChangeLog:
2016-07-22 Andre Vehreschild <vehre@gcc.gnu.org>
* gfortran.dg/coarray_stat_2.f90: New test.
From-SVN: r238636
2016-06-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/48852
* io/write.c: Cleaned up whitespace.
(write_d, write_e, write_f, write_es, write_en): Use new helper function
write_float_0. (write_float_0): New helper function.
(get_precision, select_buffer, select_string, write_float_string): New
helper functions used in remaining float writing functions. Helper function
write_float_string now contains code for writing to kind=4 character
internal units.
(write_real): Modified to establish working buffers at this level and to
use new helper functions.
(write_real_g0): Likewise modified.
(write_complex): Likewise modified. Gets both float strings before
output so that final lengths can be determined which allows right
justifying the complex number with no intervening spaces.
* io/write_float.def (build_float_string): Renamed from previosly
output_float, modified to use buffers passed in from higher functions,
builds a null terminated string of the floating point value. Character
kind=4 code eliminated.
(write_infnan): Likewise modified to use incoming buffers and eliminate
kind=4 related code.
(OUTPUT_FLOAT_FMT_G): Deleted, functionality moved into FORMAT_FLOAT.
(FORMAT_FLOAT): Renamed macro from WRITE_FLOAT. Use build_float_string.
(get_float_string): Renamed from write_float, uses FORMAT_FLOAT macro.
Buffer allocation removed, now at higher level.
PR libgfortran/48852
* gfortran.dg/char4_iunit_1.f03: Update test.
* gfortran.dg/f2003_io_5.f03: Update test.
* gfortran.dg/real_const_3.f90: Update test.
From-SVN: r237735
2016-05-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/71123
* io/list_read (eat_spaces): Eat '\r' as part of spaces.
fix change log
From-SVN: r236629
2016-05-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/70684
* io/list_read (eat_spaces): Eat '\r' as part of spaces.
* gfortran.dg/namelist_90.f: New test
From-SVN: r236628
2016-04-19 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/70684
* io/list_read (check_buffers): Add '\r' to check for end of line.
factor.
* gfortran.dg/list_read_14.f90: New test.
From-SVN: r235220
2016-03-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Dominique d'Humieres <dominiq@lps.ens.fr>
PR libgfortran/70235
* io/write_float.def: Fix PF format for negative values of the scale
factor.
2016-03-30 Dominique d'Humieres <dominiq@lps.ens.fr>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
* gfortran.dg/fmt_pf.f90: New test.
From-SVN: r234600
2016-02-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/69456
* io/list_read.c (read_real): If digit is missing from exponent issue
an error. (parse_real): Likewise and adjusted error message to clarify
it is part of a complex number.
(nml_read_obj): Bump item count and add comment that this is used to
identify which item in a namelist read has a problem.
PR libgfortran/69456
* gfortran.dg/namelist_89.f90: New test.
* gfortran.dg/pr59700.f90: Update test..
From-SVN: r233641
2016-02-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/69651
* io/list_read.c: Entire file trailing spaces removed.
(CASE_SEPARATORS): Remove '!'.
(is_separator): Add namelist mode as condition with '!'.
(push_char): Remove un-needed memset. (push_char4): Likewise and remove
'new' pointer. (eat_separator): Remove un-needed use of notify_std.
(read_logical): If '!' bang encountered when not in namelist mode got
bad_logical to give an error. (read_integer): Likewise reject '!'.
(read_character): Remove condition testing c = '!' which is now inside
the is_separator macro. (parse_real): Reject '!' unless in namelist mode.
(read_complex): Reject '!' unless in namelist mode. (read_real): Likewise
reject '!'.
PR libgfortran/69651
* gfortran.dg/read_bang.f90: New test.
* gfortran.dg/read_bang4.f90: New test.
From-SVN: r233436
PR libfortran/68744
* runtime/backtrace.c: Include gthr.h.
(show_backtrace): Use __gthread_active_p() to determine whether threads
are active. Return if lbstate is NULL.
From-SVN: r232770
2015-12-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/pr68867
* io/write.c (set_fnode_default): For kind=16, set the decimal precision
depending on the platform binary precision, 106 or 113.
From-SVN: r231639
2015-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/write_float.def (output_float): Move block determining
room for leading zero to before checkng g0 formatting.
From-SVN: r230728
2015-09-02 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/67414
* io/write.c (gfc_itoa): Move to runtime/string.c.
* libgfortran.h (show_backtrace): Make arg bool.
(gfc_itoa): New prototype.
* runtime/backtrace.c (struct mystate): Change type of try_simple
field, add in_signal_handler field.
(error_callback): Print out error number, or if not in a signal
handler, the error message.
(show_backtrace): Change type of arg, change initialization of
struct mystate.
(backtrace): Call show_backtrace with correct arg type.
* runtime/compile_options.c (backtrace_handler): Call with correct
arg type.
* runtime/error.c (sys_abort): Likewise.
(gf_strerror): Handle newlocale() failure.
* runtime/string.c (gfc_itoa): Function moved here from
io/write.c.
From-SVN: r227404
2015-08-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/67367
* io/unix.c (buf_read): Check for error condition and if found
return the error code.
From-SVN: r227320
* configure.ac: Auto-detect newlib function support unless we
know there are issues when configuring for a host.
* configure: Regenerate.
From-SVN: r227301
PR libfortran/57496
* io/write_float.def: Use built-in type-generic functions defined
by libgfortran.h for isfinite, isnan, and signbit.
From-SVN: r227136
2015-08-10 Steven G. Kargl <kargl@gcc.gnu.org>
PR libfortran/67140
* intrinsics/mvbits.c: Fix build for paltforms without c_int128_t.
From-SVN: r226769
PR fortran/64022
* simplify.c (gfc_simplify_ieee_selected_real_kind): Extend IEEE
support to all real kinds.
* ieee/ieee_exceptions.F90: Support all real kinds.
* ieee/ieee_arithmetic.F90: Likewise.
* ieee/ieee_helper.c (ieee_class_helper_10,
ieee_class_helper_16): New functions
* gfortran.map (GFORTRAN_1.7): Add entries.
* gfortran.dg/ieee/ieee_7.f90: Adjust test.
* gfortran.dg/ieee/large_1.f90: New test.
From-SVN: r226548
2015-07-14 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/66861
* io/unix.c (compare_file_filename): Verify that u->filename is
non-NULL before strcmp.
(find_file0): Likewise.
From-SVN: r225788
On behalf of szabolcs.nagy@arm.com
[libstdc++-v3/]
2015-04-22 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/os/generic/os_defines.h (_GLIBCXX_GTHREAD_USE_WEAK): Define.
* configure.host (os_include_dir): Set to "os/generic" for linux-musl*.
[libgfortran/]
2015-04-22 Szabolcs Nagy <szabolcs.nagy@arm.com>
* acinclude.m4 (GTHREAD_USE_WEAK): Define as 0 for *-*-musl*.
* configure: Regenerate.
From-SVN: r222329
2015-04-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/65234
* io/format.c (parse_format_list): Set the seen_dd flag in all
cases where a data descriptor has been seen.
From-SVN: r222274
2015-04-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/56743
* io/list_read.c (CASE_SEPARATORS): Add case for '!'.
(is_separator): Add condition for '!'.
(eat_separator): Use notify_std to warn or errord if '!' is
encountered before a proper separator.
From-SVN: r222271
2015-04-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/65089
* io/format.h (free_format): New function to free memory
allocated for building format error messages.
* io/format.c (format_error): Add checks before freeing memory
to avoid potential segfaults and free formatting data when
needed on error conditions. Always allocate and NULL terminate
the string.
* io/transfer.c (st_read_done, st_write_done): Use new
free_format function to clean up memory allocations when done.
From-SVN: r222111
2015-03-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/65596
* io/transfer.c (data_transfer_init): If in namelist mode and
delimiter is not specified, set it to DELIM_QUOTE, independent
of -std.
* io/unit.c (init_units): Set flags.delim to the correct
initial value of DELIM_UNSPECIFIED.
From-SVN: r221753
2015-03-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/59513
* io/transfer.c (data_transfer_init): Do not error for
-std=legacy.
From-SVN: r221572
Based on GCC trunk r220892, for nvptx-none:
=== gfortran Summary ===
# of expected passes [-31320-]{+32117+}
# of unexpected failures [-7222-]{+6821+}
# of expected failures 78
# of unresolved testcases [-6441-]{+6158+}
# of untested testcases [-432-]{+391+}
# of unsupported tests 639
libgfortran/
* caf/single.c (caf_runtime_error): Revert 2014-11-28 changes.
* runtime/minimal.c (STRERR_MAXSZ): Don't define.
(runtime_error_at, sys_abort): Bring more in line with the
non-LIBGFOR_MINIMAL code.
(runtime_warning_at, internal_error): New functions.
From-SVN: r221363
2015-02-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/57822
* io/write_float.def (output_float): Apply fix of previous patch
to correctly calculate the exponent number of digits and take
care of wide character output.
From-SVN: r220606
2015-02-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/57822
* io/write_float.def (output_float): If doing g0 editing and
exponent is zero, do not emit exponent.
From-SVN: r220564
2015-02-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/60956
* io/fbuf.c (fbuf_flush_list): New function that only flushes
if current fbuf position exceeds a limit.
* io/fbuf.h: Declare the new function.
* io/io.h (enum unit_mode): Add two new modes.
* io/list_read.c (list_formatted_read_scalar): Call new function.
* io/write.c: Include fbuf.h. (list_formatted_write_scalar):
Call new function.
From-SVN: r220505
2015-01-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61933
* io/inquire.c (inquire_via_unit): Set existing to true for
any negative unit that is currently connected and any positive
units within range of KIND=4 value. The unit value for any out
of range case that may occur if the user is using a KIND=8 will
have been set to -2 which is reserved and can never be opened,
and therefore the unit does not exist.
From-SVN: r220024
2015-01-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61933
* io/inquire.c (inquire_via_unit): Set existing to true if a
gfc_unit stucture was found for the given unit number.
* runtime/error.c (translate_error): Add case for
LIBERROR_INQUIRE_INTERNAL_UNIT.
From-SVN: r219631
2014-11-16 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/60324
* intrinsics/random.c (kiss_size): Rename to KISS_SIZE, make it a
macro instead of a variable.
(random_seed_i4): Make seed correct size, remove assert, KISS_SIZE
related changes.
(random_seed_i8): KISS_SIZE related changes.
From-SVN: r217623
2014-11-13 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/60324
* configure: Regenerated.
* configure.ac (AM_CFLAGS): Add Werror=vla.
* libgfortran.h (gfc_alloca): Remove macro.
(fc_strdup_notrim): New prototype.
* intrinsics/access.c (access_func): Use fc_strdup rather than
stack allocation.
* intrinsics/chdir.c (chdir_i4_sub): Likewise.
(chdir_i8_sub): Likewise.
* intrinsics/chmod.c (chmod_internal): New function, move logic
here.
(chmod_func): Call chmod_internal.
* intrinsics/env.c (getenv): Use fc_strdup rather than stack
allocation.
(get_environment_variable_i4): Likewise.
* intrinsics/execute_command_line.c (execute_command_line):
Likewise.
* intrinsics/hostnm.c (hostnm_0): New function, use static buffer
rather than VLA.
(hostnm_i4_sub): Call hostnm_0.
(hostnm_i8_sub): Likewise.
(hostnm): Likewise.
* intrinsics/link.c (link_internal): New function, use fc_strdup
rather than stack allocation.
(link_i4_sub): Call link_internal.
(link_i8_sub): Likewise.
(link_i4): Likewise.
(link_i8): Likewise.
* intrinsics/perror.c (perror_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/random.c (random_seed_i4): Use static buffer rather
than VLA, use _Static_assert to make sure it's big enough.
* intrinsics/rename.c (rename_internal): New function, use
fc_strdup rather than stack allocation.
(rename_i4_sub): Call rename_internal.
(rename_i8_sub): Likewise.
(rename_i4): Likewise.
(rename_i8): Likewise.
* intrinsics/stat.c (stat_i4_sub_0): Use fc_strdup rather than
stack allocation.
(stat_i8_sub_0): Likewise.
* intrinsics/symlink.c (symlnk_internal): New function, use
fc_strdup rather than stack allocation.
(symlnk_i4_sub): Call symlnk_internal.
(symlnk_i8_sub): Likewise.
(symlnk_i4): Likewise.
(symlnk_i8): Likewise.
* intrinsics/system.c (system_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/unlink.c (unlink_i4_sub): Likewise.
* io/file_pos.c (READ_CHUNK): Make it a macro rather than variable.
* io/list_read.c (nml_get_obj_data): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* io/read.c (read_f): Likewise.
* io/transfer.c (MAX_READ): Make it a macro rather than variable.
(WRITE_CHUNK): Likewise.
* io/write_float.def (write_float): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* runtime/string.c (fc_strdup_notrim): New function.
From-SVN: r217480
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* config.h.in: Regenerated.
* configure: Regenerated.
* configure.ac (AC_CHECK_HEADERS_ONCE): Check for xlocale.h.
(AC_CHECK_FUNCS_ONCE): Check for newlocale, freelocale, uselocale,
strerror_l.
* io/io.h (locale.h): Include.
(xlocale.h): Include if present.
(c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(st_parameter_dt): Add old_locale member.
* io/transfer.c (data_transfer_init): Set locale to "C" if doing
formatted transfer.
(finalize_transfer): Reset locale to previous.
* io/unit.c (c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(init_units): Init c_locale, init old_locale_lock.
(close_units): Free c_locale.
* runtime/error.c (locale.h): Include.
(xlocale.h): Include if present.
(gf_strerror): Use strerror_l if available. Reset locale to
LC_GLOBAL_LOCALE for strerror_r branch.
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* gfortran.texi: Add note about locale issues to thread-safety
section.
From-SVN: r217273
2014-10-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/63460
* io/unit.c (init_units): Initialize the DELIM flag to
UNSPECIFIED for the STDIN unit so that the flag is
correctly set later.
From-SVN: r215908
2014-09-18 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/62768
* io/inquire.c (inquire_via_unit): Use gfc_unit.filename also when
HAVE_TTYNAME{_R} is not defined.
From-SVN: r215338
2014-09-10 Janne Blomqvist <jb@gcc.gnu.org>
* io/transfer.c (read_block_form): Fix pad status check (found by
Thomas Schwinge with -Wlogical-not-parentheses).
From-SVN: r215092
2014-08-20 Steven G. Kargl <kargl@gcc.gnu.org>
PR libgfortran/62188
* m4/bessel.m4: Avoid indexing off the end of an array.
* generated/bessel_r10.c: Regenerated.
* generated/bessel_r16.c: Ditto.
* generated/bessel_r4.c: Ditto.
* generated/bessel_r8.c: Ditto.
From-SVN: r214229
2014-07-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61632
* io/format.c (format_error): Avoid invalid string pointer by
using the fortran string length values to generate error string.
(parse_format): Allocate the null terminator for the format
string.
From-SVN: r212875
2014-06-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61640
* io/list_read.c (next_char_internal): Adjust the read length to
a single wide character. (eat_spaces): Add missing paren.
* io/unix.c (mem_read4): Use the correct mem_alloc function for
wide character internal reads.
From-SVN: r212118
PR fortran/29383
gcc/fortran/
* gfortran.h (gfc_simplify_ieee_selected_real_kind): New prototype.
* libgfortran.h (GFC_FPE_*): Use simple integer values, valid in
both C and Fortran.
* expr.c (gfc_check_init_expr): Simplify IEEE_SELECTED_REAL_KIND.
* simplify.c (gfc_simplify_ieee_selected_real_kind): New function.
* module.c (mio_symbol): Keep track of symbols which came from
intrinsic modules.
(gfc_use_module): Keep track of the IEEE modules.
* trans-decl.c (gfc_get_symbol_decl): Adjust code since
we have new intrinsic modules.
(gfc_build_builtin_function_decls): Build decls for
ieee_procedure_entry and ieee_procedure_exit.
(is_from_ieee_module, is_ieee_module_used, save_fp_state,
restore_fp_state): New functions.
(gfc_generate_function_code): Save and restore floating-point
state on procedure entry/exit, when IEEE modules are used.
* intrinsic.texi: Document the IEEE modules.
libgfortran/
* configure.host: Add checks for IEEE support, rework priorities.
* configure.ac: Define IEEE_SUPPORT, check for fpsetsticky and
fpresetsticky.
* configure: Regenerate.
* Makefile.am: Build new ieee files, install IEEE_* modules.
* Makefile.in: Regenerate.
* gfortran.map (GFORTRAN_1.6): Add new symbols.
* libgfortran.h (get_fpu_trap_exceptions, set_fpu_trap_exceptions,
support_fpu_trap, set_fpu_except_flags, support_fpu_flag,
support_fpu_rounding_mode, get_fpu_state, set_fpu_state): New
prototypes.
* config/fpu-*.h (get_fpu_trap_exceptions,
set_fpu_trap_exceptions, support_fpu_trap, set_fpu_except_flags,
support_fpu_flag, support_fpu_rounding_mode, get_fpu_state,
set_fpu_state): New functions.
* ieee/ieee_features.F90: New file.
* ieee/ieee_exceptions.F90: New file.
* ieee/ieee_arithmetic.F90: New file.
* ieee/ieee_helper.c: New file.
gcc/testsuite/
* lib/target-supports.exp (check_effective_target_fortran_ieee):
New function.
* gfortran.dg/ieee/ieee.exp: New file.
* gfortran.dg/ieee/ieee_1.F90: New file.
* gfortran.dg/ieee/ieee_2.f90: New file.
* gfortran.dg/ieee/ieee_3.f90: New file.
* gfortran.dg/ieee/ieee_4.f90: New file.
* gfortran.dg/ieee/ieee_5.f90: New file.
* gfortran.dg/ieee/ieee_6.f90: New file.
* gfortran.dg/ieee/ieee_7.f90: New file.
* gfortran.dg/ieee/ieee_rounding_1.f90: New file.
From-SVN: r212102
2014-06-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61499
* io/list_read.c (eat_spaces): Use a 'for' loop instead of
'while' loop to skip the loop if there are no bytes left in the
string. Only seek if actual spaces can be skipped.
From-SVN: r212059
2014-05-26 Tobias Burnus <burnus@net-b.de>
PR fortran/55117
* trans-io.c (nml_full_name, transfer_namelist_element): Insert
a '+' rather then '%' to differentiate namelist variable names
that are based on extended derived types.
2014-05-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/55117
* io/list_read.c (extended_look_ahead): New helper function to
scan the namelist name and look for matches with the new '+'
extended type parent indicator. (str_comp_extended): New
helper function to compare the namelist name with the varname
namelist. (find_nml_name): Use the new helper functions to match
the extended type varnames.
From-SVN: r210934
2014-05-23 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/61173
* io/list_read.c (eat_spaces): If the next character pointed to
is a space, don't seek, must be at the end.
From-SVN: r210898
2014-05-17 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/52539
* io/io.h (gfc_unit): New function pointers *next_char_fn_ptr
and *push_char_fn_ptr.
*io/list_read.c (next_char): Create macro with this name to call
the new function pointer. Split the original next_char function
into three new functions. (next_char_default, next_char_internal,
next_char_utf8): New functions. (push_char): Create macro with
this name to call new function pointer. Split the original
push_char into three new functions. (push_char_default,
push_char_internal, push_char4): New functions. (set_workers):
New function to initilize the function pointers depending on the
type of IO to be performed. (list_formatted_read_scalar): Use
set_workers function. (finish_list_read): Likewise.
(namelist_read): Likewise.
(nml_get_obj_data): Use push_char_default.
From-SVN: r210574
2014-05-16 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/61187
* io/unix.c (raw_close): Check if s->fd is -1.
(fd_to_stream): Check return value of fstat(), handle error.
From-SVN: r210527
2014-05-12 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/61035
* intrinsics/getcwd.c (getcwd_i4_sub): Avoid potentially large
stack allocation, avoid extra copying in the common case.
From-SVN: r210335
2014-05-11 Tobias Burnus <burnus@net-b.de>
* trans-intrinsic.c (gfc_build_builtin_function_decls):
Change type of second argument to int.
2014-05-11 Tobias Burnus <burnus@net-b.de>
* caf/libcaf.h (_gfortran_caf_num_images): Change type of
second argument to int.
* caf/mpi.c (_gfortran_caf_num_images): Ditto.
* caf/single.c (_gfortran_caf_num_images): Ditto.
From-SVN: r210311
2014-04-26 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/52539
* io/list_read.c: Add uchar typedef. (push_char4): New function
to save kind=4 character. (next_char_utf8): New function to read
a single UTF-8 encoded character value. (read_chracter): Update
to use the new functions for reading UTF-8 strings.
(list_formatted_read_scalar): Update to handle list directed
reads of UTF-8 strings. (nml_read_obj): Likewise update for
UTF-8 strings in namelists.
* io/write.c (nml_write_obj): Add kind=4 character support for
namelist writes.
From-SVN: r209828
