7adcbafe45
Update copyright years.
2022-01-03 10:42:10 +01:00
99dee82307
Update copyright years.
2021-01-04 10:26:59 +01:00
2dd7b93778
[RS6000] Adjust gcc asm for power10
...
Generate assembly with .localentry,1 functions using @notoc calls.
This patch makes libgcc.a asm look the same as power10 pcrel as far as
toc/notoc is concerned.
Otherwise calling between functions that advertise as using the TOC
and those that don't, will require linker call stubs in statically
linked code.
gcc/
* config/rs6000/ppc-asm.h: Support __PCREL__ code.
libgcc/
* config/rs6000/morestack.S,
* config/rs6000/tramp.S: Support __PCREL__ code.
libitm/
* config/powerpc/sjlj.S: Support __PCREL__ code.
2020-10-01 10:34:48 +09:30
ab240ab509
aarch64: add PAC-RET protection to libitm sjlj.S
...
_ITM_beginTransaction is a 'returns_twice' function that saves x30
on the stack as part of gtm_jmpbuf (that is passed down to
GTM_begin_transaction), but the saved x30 is also used for return.
The return path should be protected so we don't leave an
ldp x29, x30, [sp]
ret
gadget in the code, so x30 is signed on function entry. This
exposes the signed address in the gtm_jmpbuf too. The jmpbuf does
not need a signed address since GTM_longjmp uses
ldp x29, x30, [x1]
br x30
and with BTI there is a BTI j at the _ITM_beginTransaction call site
where this jump returns. Using PAC does not hurt: the gtm_jmpbuf is
internal to libitm and its layout is only used by sjlj.S so the
signed address does not escape. Saving signed x30 into gtm_jmpbuf
provides a bit of extra protection, but more importantly it allows
adding the PAC-RET support without changing the existing code much.
In theory bti and pac-ret protection can be added unconditionally
since the instructions are in the nop space, in practice they
can cause trouble if some tooling does not understand the gnu
property note (e.g. old binutils) or some unwinder or debugger
does not understand the new dwarf op code used for pac-ret (e.g
old gdb). So the code is written to only support branch-protection
according to the code generation options.
libitm/ChangeLog:
* config/aarch64/sjlj.S: Add conditional pac-ret protection.
2020-07-24 11:44:53 +01:00
319078dad6
aarch64: Fix BTI support in libitm
...
sjlj.S did not have the GNU property note markup and the BTI c
instructions that are necessary when it is built with branch
protection.
The notes are only added when libitm is built with branch
protection, because old linkers mishandle the note (merge
them incorrectly or emit warnings), the BTI instructions
are added unconditionally.
2020-07-09 Szabolcs Nagy <szabolcs.nagy@arm.com>
libitm/ChangeLog:
* config/aarch64/sjlj.S: Add BTI marking and related definitions,
and add BTI c to function entries.
2020-07-09 09:50:25 +01:00
463ba375f7
aarch64: Fix noexecstack note in libitm
...
sjlj.S only had the note on Linux, but it is supposed
to have it on FreeBSD too.
2020-07-09 Szabolcs Nagy <szabolcs.nagy@arm.com>
libitm/ChangeLog:
* config/aarch64/sjlj.S: Add stack note if __FreeBSD__ is defined.
2020-07-09 09:50:25 +01:00
8d9254fc8a
Update copyright years.
...
From-SVN: r279813
2020-01-01 12:51:42 +01:00
a360a359b7
[ARM/FDPIC v6 23/24] [ARM] FDPIC: Implement libitm support.
...
The ldaddr macro in sjlj.S needs to be updated to support the FDPIC
model.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
libitm/
* config/arm/sjlj.S (ldaddr): Add FDPIC support.
From-SVN: r275584
2019-09-10 10:11:46 +02:00
a554497024
Update copyright years.
...
From-SVN: r267494
2019-01-01 13:31:55 +01:00
d1573fe051
target.h (htm_available): Add support for PPC_FEATURE2_HTM_NO_SUSPEND.
...
libitm/
* config/powerpc/target.h (htm_available): Add support for
PPC_FEATURE2_HTM_NO_SUSPEND. Use __builtin_cpu_supports if available.
From-SVN: r267101
2018-12-13 12:04:11 -06:00
5ae10dbaec
Remove nfs bogon
...
From-SVN: r263300
2018-08-03 14:53:48 -06:00
f6a9dfd369
sjlj.S: Adjust to use PIC vs normal code to avoid absolute relocation in a shared library.
...
* config/sh/sjlj.S: Adjust to use PIC vs normal code to avoid
absolute relocation in a shared library.
From-SVN: r263299
2018-08-03 14:53:08 -06:00
97cad5113b
libitm/x86: Correct offsets of __private_tm and pointer_guard
...
In glibc, sysdeps/i386/nptl/tls.h has
typedef struct
{
void *tcb; /* Pointer to the TCB. Not necessarily the
thread descriptor used by libpthread. */
dtv_t *dtv;
void *self; /* Pointer to the thread descriptor. */
int multiple_threads;
uintptr_t sysinfo;
uintptr_t stack_guard;
uintptr_t pointer_guard;
int gscope_flag;
int __glibc_reserved1;
/* Reservation of some values for the TM ABI. */
void *__private_tm[4];
/* GCC split stack support. */
void *__private_ss;
} tcbhead_t;
and sysdeps/x86_64/nptl/tls.h has
typedef struct
{
void *tcb; /* Pointer to the TCB. Not necessarily the
thread descriptor used by libpthread. */
dtv_t *dtv;
void *self; /* Pointer to the thread descriptor. */
int multiple_threads;
int gscope_flag;
uintptr_t sysinfo;
uintptr_t stack_guard;
uintptr_t pointer_guard;
unsigned long int vgetcpu_cache[2];
int __glibc_reserved1;
int __glibc_unused1;
/* Reservation of some values for the TM ABI. */
void *__private_tm[4];
/* GCC split stack support. */
void *__private_ss;
long int __glibc_reserved2;
/* Must be kept even if it is no longer used by glibc since programs,
like AddressSanitizer, depend on the size of tcbhead_t. */
__128bits __glibc_unused2[8][4] __attribute__ ((aligned (32)));
void *__padding[8];
} tcbhead_t;
The offsets of __private_tm are
i386: 36 bytes
x32: 48 bytes
x86_64: 80 bytes
and the offsets of pointer_guard are:
i386: 24 bytes
x32: 28 bytes
x86_64: 48 bytes
But config/linux/x86/tls.h had
#ifdef __x86_64__
#ifdef __LP64__
# define SEG_READ(OFS) "movq\t%%fs:(" #OFS "*8),%0"
# define SEG_WRITE(OFS) "movq\t%0,%%fs:(" #OFS "*8)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorq\t$17,%0\n\t" \
"xorq\t%%fs:48,%0"
# define SEG_ENCODE_WRITE(OFS) "xorq\t%%fs:48,%0\n\t" \
"rolq\t$17,%0\n\t" \
SEG_WRITE(OFS)
#else
// For X32.
# define SEG_READ(OFS) "movl\t%%fs:(" #OFS "*4),%0"
# define SEG_WRITE(OFS) "movl\t%0,%%fs:(" #OFS "*4)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorl\t$9,%0\n\t" \
"xorl\t%%fs:24,%0"
# define SEG_ENCODE_WRITE(OFS) "xorl\t%%fs:24,%0\n\t" \
"roll\t$9,%0\n\t" \
SEG_WRITE(OFS)
#endif
#else
# define SEG_READ(OFS) "movl\t%%gs:(" #OFS "*4),%0"
# define SEG_WRITE(OFS) "movl\t%0,%%gs:(" #OFS "*4)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorl\t$9,%0\n\t" \
"xorl\t%%gs:24,%0"
# define SEG_ENCODE_WRITE(OFS) "xorl\t%%gs:24,%0\n\t" \
"roll\t$9,%0\n\t" \
SEG_WRITE(OFS)
#endif
static inline struct gtm_thread *gtm_thr(void)
{
struct gtm_thread *r;
asm volatile (SEG_READ(10) : "=r"(r));
return r;
}
static inline void set_gtm_thr(struct gtm_thread *x)
{
asm volatile (SEG_WRITE(10) : : "r"(x));
}
static inline struct abi_dispatch *abi_disp(void)
{
struct abi_dispatch *r;
asm volatile (SEG_DECODE_READ(11) : "=r"(r));
return r;
}
static inline void set_abi_disp(struct abi_dispatch *x)
{
void *scratch;
asm volatile (SEG_ENCODE_WRITE(11) : "=r"(scratch) : "0"(x));
}
SEG_READ, SEG_WRITE, SEG_DECODE_READ and SEG_ENCODE_WRITE were correct
only for x86-64.
Update SEG_READ and SEG_WRITE to use the offset of __private_tm as base
and correct the offset of pointer_guard for x32. This patch doesn't
change ABI of libitm.
PR libitm/85988
* config/linux/x86/tls.h (SEG_READ): Use the offset of
__private_tm as base.
(SEG_WRITE): Likewise.
(SEG_ENCODE_WRITE): Correct the offset of pointer_guard for x32.
(gtm_thr): Replace SEG_READ(10) with SEG_READ(0).
(set_gtm_thr): Replace SEG_WRITE(10) with SEG_WRITE(0).
(abi_disp): Replace SEG_DECODE_READ(11) with SEG_DECODE_READ(1).
(set_abi_disp): Replace SEG_ENCODE_WRITE(11) with
SEG_ENCODE_WRITE(1).
From-SVN: r261491
2018-06-12 04:08:52 -07:00
ffc2fc06e3
x86: Update __CET__ check
...
__CET__ has been changed by revision 259522:
commit d59cfa9a4064339cf2bd2da828c4c133f13e57f0
Author: hjl <hjl@138bc75d-0d04-0410-961f-82ee72b054a4>
Date: Fri Apr 20 13:30:13 2018 +0000
Define __CET__ for -fcf-protection and remove -mibt
to
(__CET__ & 1) != 0: -fcf-protection=branch or -fcf-protection=full
(__CET__ & 2) != 0: -fcf-protection=return or -fcf-protection=full
We should check (__CET__ & 2) != 0 for shadow stack.
libgcc/
* config/i386/linux-unwind.h: Add (__CET__ & 2) != 0 check
when including "config/i386/shadow-stack-unwind.h".
libitm/
* config/x86/sjlj.S (_ITM_beginTransaction): Add
(__CET__ & 2) != 0 check for shadow stack.
(GTM_longjmp): Likewise.
From-SVN: r259621
2018-04-24 15:15:51 -07:00
0ef9f21d3c
x86/cet: Use unsigned integer to unwind shadow stack
...
Use unsigned integer to unwind shadow stack by replacing jle with jbe and
jg with ja.
PR target/85489
* config/x86/sjlj.S (GTM_longjmp): Replace jle/jg with jbe/ja.
From-SVN: r259559
2018-04-23 05:29:00 -07:00
85ec4feb11
Update copyright years.
...
From-SVN: r256169
2018-01-03 11:03:58 +01:00
c51081fc9f
Enable building libitm with Intel CET
...
libitm/
* Makefile.in: Regenerate.
* acinclude.m4: Add enable.m4 and cet.m4.
* config/x86/sjlj.S: Include cet.h.
(_ITM_beginTransaction): Add _CET_ENDBR.
Save Shadow Stack pointer.
(GTM_longjmp): Add _CET_ENDBR. Restore Shadow Stack pointer.
* config/x86/target.h (struct gtm_jmpbuf):
Add new field for Shadow Stack pointer.
* configure: Regenerate.
* configure.ac: Set CET_FLAGS. Update XCFLAGS.
* configure.ac: Update libtool_VERSION for x86.
* testsuite/Makefile.in: Regenerate.
From-SVN: r254908
2017-11-17 23:59:41 +01:00
cc03e55b5a
Add extra field to gtm_jmpbuf on x86 only
...
Expand the gtm_jmpbuf structure by one word field to add
Intel CET support further. The code in sjlj.S already
allocates more space on the stack then gtm_jmpbuf needs.
Use this extra space to absorb the new field.
The structure is allocated on the stack in such a way
that eip/rsp field is overlapped with return address on
the stack. Locate the new field right before eip/rsp so
code that accesses buffer fields relative to address of
gtm_jmpbuf has its offsets unchanged.
* libitm/config/x86/target.h: Add new field (ssp).
* libitm/config/x86/sjlj.S: Change offsets.
From-SVN: r254907
2017-11-17 23:57:07 +01:00
16a34ca6ac
target.h (htm_available): Determine vendor from __get_cpuid_max return.
...
* config/x86/target.h (htm_available): Determine vendor from
__get_cpuid_max return. Use signature_INTEL_ebx. Cleanup.
From-SVN: r244644
2017-01-19 18:10:40 +01:00
f8a94453ad
libitm: Disable TSX on processors on which it may be broken.
...
libitm/ChangeLog
* config/x86/target.h (htm_available): Add check for some processors
on which TSX is broken.
From-SVN: r244594
2017-01-18 20:22:02 +00:00
cbe34bb5ed
Update copyright years.
...
From-SVN: r243994
2017-01-01 13:07:43 +01:00
edcbda7e2c
libitm: Introduce target macro TARGET_BEGIN_TRANSACTION_ATTRIBUTE.
...
The attached patch adds the a target specific attribute via the
new target macro TARGET_BEGIN_TRANSACTION_ATTRIBUTE to the
function begin_transaction(). S/390 uses this to set the
soft-float target attribute which is needed to fix a crash with
-m31.
As there seems to be no place in libitm to document internal macros like
USE_HTM_FASTPATH or the new macro, I've put the documentation in a
comment where the macro is used.
2016-03-03 Dominik Vogt <vogt@linux.vnet.ibm.com>
* config/s390/target.h (TARGET_BEGIN_TRANSACTION_ATTRIBUTE): Define
function attribute to disable floating point in begin_transaction() on
S/390.
* beginend.cc (begin_transaction): Use
TARGET_BEGIN_TRANSACTION_ATTRIBUTE.
From-SVN: r233929
2016-03-03 09:31:57 +00:00
6041f70ae3
libitm: Fix HTM fastpath.
...
* beginend.cc (GTM::gtm_thread::serial_lock): Put on cacheline
boundary.
(htm_fastpath): Remove.
(gtm_thread::begin_transaction): Fix HTM fastpath.
(_ITM_commitTransaction): Adapt.
(_ITM_commitTransactionEH): Adapt.
* libitm/config/linux/rwlock.h (gtm_rwlock): Add htm_fastpath member
and accessors.
* libitm/config/posix/rwlock.h (gtm_rwlock): Likewise.
* libitm/config/posix/rwlock.cc (gtm_rwlock::gtm_rwlock): Adapt.
* libitm/config/x86/sjlj.S (_ITM_beginTransaction): Fix HTM fastpath.
* libitm/libitm_i.h (htm_fastpath): Remove declaration.
* libitm/method-serial.cc (htm_mg): Adapt.
(gtm_thread::serialirr_mode): Adapt.
* libitm/query.cc (_ITM_inTransaction, _ITM_getTransactionId): Adapt.
From-SVN: r232735
2016-01-22 16:13:06 +00:00
b1de98e3d9
re PR target/69343 (Bootstrap failure on s390{,x}-linux)
...
PR bootstrap/69343
PR bootstrap/69339
PR tree-opt/68964
Revert:
gcc/
* tree.c (tm_define_builtin): New.
(find_tm_vector_type): New.
(build_tm_vector_builtins): New.
(build_common_builtin_nodes): Call it.
libitm/
* Makefile.am (libitm_la_SOURCES) [ARCH_AARCH64]: Add vect128.cc
(libitm_la_SOURCES) [ARCH_ARM]: Add neon.cc
(libitm_la_SOURCES) [ARCH_PPC]: Add vect128.cc
(libitm_la_SOURCES) [ARCH_S390]: Add vect128.cc
* configure.ac (ARCH_AARCH64): New conditional.
(ARCH_PPC, ARCH_S390): Likewise.
* Makefile.in, configure: Rebuild.
* libitm.h (_ITM_TYPE_M128): Always define.
* vect64.cc: Split ...
* vect128.cc: ... out of...
* config/x86/x86_sse.cc: ... here.
* config/arm/neon.cc: New file.
From-SVN: r232631
2016-01-20 10:53:56 -08:00
e89137cec1
libitm: Fix seq-cst MOs/fences in rwlock.
...
From-SVN: r232353
2016-01-13 21:39:50 +00:00
4c868789e4
re PR target/68964 (Internal compiler error for test case gcc.dg/tm/20100610.c since r231674)
...
PR 68964
gcc/
PR tree-opt/68964
* target.def (builtin_tm_load, builtin_tm_store): Remove.
* config/i386/i386.c (ix86_builtin_tm_load): Remove.
(ix86_builtin_tm_store): Remove.
(TARGET_VECTORIZE_BUILTIN_TM_LOAD): Remove.
(TARGET_VECTORIZE_BUILTIN_TM_STORE): Remove.
* doc/tm.texi.in (TARGET_VECTORIZE_BUILTIN_TM_LOAD): Remove.
(TARGET_VECTORIZE_BUILTIN_TM_STORE): Remove.
* doc/tm.texi: Rebuild.
* gtm-builtins.def (BUILT_IN_TM_MEMCPY_RNWT): New.
(BUILT_IN_TM_MEMCPY_RTWN): New.
* trans-mem.c (tm_log_emit_stmt): Rearrange code for better
fallback from vector to integer helpers.
(build_tm_load): Handle vector types directly, instead of
via target hook.
(build_tm_store): Likewise.
(expand_assign_tm): Prepare for register types not handled by
the above. Copy them to memory and use memcpy.
* tree.c (tm_define_builtin): New.
(find_tm_vector_type): New.
(build_tm_vector_builtins): New.
(build_common_builtin_nodes): Call it.
libitm/
* Makefile.am (libitm_la_SOURCES) [ARCH_AARCH64]: Add vect128.cc
(libitm_la_SOURCES) [ARCH_ARM]: Add neon.cc
(libitm_la_SOURCES) [ARCH_PPC]: Add vect128.cc
(libitm_la_SOURCES) [ARCH_S390]: Add vect128.cc
* configure.ac (ARCH_AARCH64): New conditional.
(ARCH_PPC, ARCH_S390): Likewise.
* Makefile.in, configure: Rebuild.
* libitm.h (_ITM_TYPE_M128): Always define.
* vect64.cc: Split ...
* vect128.cc: ... out of...
* config/x86/x86_sse.cc: ... here.
* config/arm/neon.cc: New file.
From-SVN: r232330
2016-01-13 09:03:42 -08:00
629e47295b
libitm: Fix privatization safety interaction with serial mode.
...
From-SVN: r232322
2016-01-13 12:40:34 +00:00
0d1ed41261
libitm: Remove dead code and data.
...
From-SVN: r232275
2016-01-12 14:57:45 +00:00
818ab71a41
Update copyright years.
...
From-SVN: r232055
2016-01-04 15:30:50 +01:00
1e44e857e0
config.gcc: Handle --enable-fdpic.
...
gcc/ChangeLog
* config.gcc: Handle --enable-fdpic.
* config/sh/constraints.md (Ccl): New constraint.
* config/sh/linux.h (SUBTARGET_LINK_EMUL_SUFFIX): Handle -mfdpic.
* config/sh/sh-c.c (sh_cpu_cpp_builtins): Add __FDPIC__ and
__SH_FDPIC__.
* config/sh/sh-mem.cc (expand_block_move): Support FDPIC for calls to
library functions.
* config/sh/sh-protos.h (function_symbol_result): New struct.
(function_symbol): Return function_symbol_result.
(sh_get_fdpic_reg_initial_val, sh_load_function_descriptor): New
declarations.
* config/sh/sh.c (TARGET_ASM_INTEGER, sh_assemble_integer): Implement
target hook.
(TARGET_CANNOT_FORCE_CONST_MEM, sh_cannot_force_const_mem_p): Likewise.
(sh_option_override): Force -fPIC if FDPIC is in effect.
(sh_asm_output_addr_const_extra): Add UNSPEC_GOTFUNCDESC and
UNSPEC_GOTOFFFUNCDESC cases.
(prepare_move_operands): Use FDPIC initial GOT register for
TLS-related GOT access; inhibit cross-section address offset constants
for FDPIC.
(sh_assemble_integer): New function.
(sh_cannot_copy_insn_p): Inhibit copying insns that are FDPIC
PC-relative call sites.
(expand_ashiftrt): Adapt invocation of function_symbol.
(sh_expand_prologue): Inhibit PC-relative GOT address load for FDPIC.
(nonpic_symbol_mentioned_p): Add cases for UNSPEC_GOTFUNCDESC and
UNSPEC_GOTOFFFUNCDESC.
(legitimize_pic_address): Resolve function symbols to function
descriptors for FDPIC. Do not use GOT-relative addressing for local
data that may be read-only on FDPIC.
(sh_emit_storesi, sh_emit_storehi): New functions.
(sh_trampoline_init): Generate FDPIC trampolines.
(sh_function_ok_for_sibcall): Add TARGET_FDPIC check.
(sh_expand_sym_label2reg): Don't assume sibcalls are local.
(sh_output_mi_thunk): Generate FDPIC call.
(function_symbol): Return function_symbol_result. For SFUNC_STATIC on
FDPIC, generate call site labels to use PC-relative addressing rather
than GOT-relative addressing.
(sh_conditional_register_usage): Make PIC register fixed and call used
when FDPIC is in effect.
(sh_legitimate_constant_p): Impose FDPIC constant constraints.
(sh_cannot_force_const_mem_p, sh_load_function_descriptor,
sh_get_fdpic_reg_initial_val): New functions.
* config/sh/sh.h (SUBTARGET_ASM_SPEC, SUBTARGET_LINK_EMUL_SUFFIX):
Handle -mfdpic.
(FDPIC_SELF_SPECS, SUBTARGET_DRIVER_SELF_SPECS,
PIC_OFFSET_TABLE_REG_CALL_CLOBBERED,
SH_OFFSETS_MUST_BE_WITHIN_SECTIONS_P): New macros.
(DRIVER_SELF_SPECS): Add SUBTARGET_DRIVER_SELF_SPECS and
FDPIC_SELF_SPECS.
(TRAMPOLINE_SIZE): Select trampoline size for FDPIC.
(ASM_PREFERRED_EH_DATA_FORMAT): Add EH format constraints for FDPIC.
(ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX): Handle FDPIC case.
* config/sh/sh.md (UNSPEC_GOTFUNCDESC, UNSPEC_GOTOFFFUNCDESC): New
constants.
(calli_fdpic, call_valuei_fdpic, sibcalli_fdpic, sibcalli_pcrel_fdpic,
sibcall_pcrel_fdpic, sibcall_valuei_fdpic, sibcall_valuei_pcrel_fdpic,
sibcall_value_pcrel_fdpic, sym2GOTFUNCDESC, symGOTFUNCDESC2reg,
sym2GOTOFFFUNCDESC, symGOTOFFFUNCDESC2reg): New patterns.
(udivsi3_i1, udivsi3_i4, udivsi3_i4_single, udivsi3,
*divsi_inv_call_combine, divsi3_i4, divsi3_i4_single, divsi3, ashlsi3,
ashlsi3_d_call, ashrsi3_n, lshrsi3, lshrsi3_d_call, calli, call_valuei,
call, call_value, sibcalli, sibcalli_pcrel, sibcall_pcrel, sibcall,
sibcall_valuei, sibcall_valuei_pcrel, sibcall_value_pcrel,
sibcall_value, GOTaddr2picreg, symGOT_load, symGOTOFF2reg,
block_move_real, block_lump_real, block_move_real_i4,
block_lump_real_i4): Add support for FDPIC calls.
(mulsi3, ic_invalidate_line, initialize_trampoline, call_pop,
call_value_pop): Adjust for new function_symbol signature.
* config/sh/sh.opt (-mfdpic): New option.
* doc/install.texi (Options specification): Document --enable-fdpic.
* doc/invoke.texi (SH Options): Document -mfdpic.
include/ChangeLog:
* longlong.h (udiv_qrnnd): Add FDPIC compatible version for SH.
libitm/ChangeLog:
* config/sh/sjlj.S (_ITM_beginTransaction): Bypass PLT calling
GTM_begin_transaction for compatibility with FDPIC.
Co-Authored-By: Andrew Stubbs <ams@codesourcery.com>
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
Co-Authored-By: Mark Shinwell <shinwell@codesourcery.com>
Co-Authored-By: Rich Felker <dalias@libc.org>
From-SVN: r229438
2015-10-27 13:36:47 +00:00
cd5a9a74d3
re PR libitm/52482 (libitm INVALID MNEMONIC in .S (powerpc asm))
...
2015-07-03 Carlos Sánchez de La Lama <csanchezdll@gmail.com>
PR target/52482
* config/powerpc/sjlj.S: Port to Xcode 2.5.
From-SVN: r225388
2015-07-03 17:28:43 +00:00
22749d7e82
* config/linux/x86/futex_bits.h (sys_futex0): Cosmetics.
...
From-SVN: r224151
2015-06-05 12:57:07 +02:00
d778b5a09c
futex_bits.h (sys_futex0): Change operands "op" and "val" to int.
...
* config/linux/x86/futex_bits.h (sys_futex0) [__x86_64__]: Change
operands "op" and "val" to int.
* config/linux/sh/futex_bits.h (sys_futex0) Change operands
"op" and "val" to int.
* config/linux/alpha/futex_bits.h (sys_futex0) Change operands
"op" and "val" to int.
* config/linux/futex.cc (gtm_futex_wait, gtm_futex_wake):
Declare as static int.
(FUTEX_PRIVATE_FLAG): Remove L suffix.
* config/linux/futex_bits.h (sys_futex0) Change operand "op" to int.
Revert:
* config/linux/x86/futex.h (sys_futex0) [!__x86_64__]:
Change operand "op" to long.
From-SVN: r223844
2015-05-28 19:36:47 +02:00
ea023bcfd8
futex.h (sys_futex0): Change operand "op" to long.
...
libgomp/ChangeLog:
* config/linux/x86/futex.h (sys_futex0) [!__x86_64__]:
Change operand "op" to long.
[__PIC__]: Remove sys_futex0 function.
libitm/ChangeLog:
* config/linux/x86/futex_bits.h (sys_futex0) [!__x86_64__]:
Change operand "op" to long.
[__PIC__]: Remove sys_futex0 function.
From-SVN: r223771
2015-05-27 21:35:58 +02:00
96ce40cbce
libitm fixes for musl support
...
On behalf of Szabolcs.Nagy@arm.com
2015-04-22 Gregor Richards <gregor.richards@uwaterloo.ca>
* config/arm/hwcap.cc: Use fcntl.h instead of sys/fcntl.h.
* config/linux/x86/tls.h: Only use __GLIBC_PREREQ if defined.
From-SVN: r222325
2015-04-22 14:11:25 +00:00
5624e564d2
Update copyright years.
...
From-SVN: r219188
2015-01-05 13:33:28 +01:00
b6334cf4bb
libitm: Improve aarch64 _ITM_beginTransaction
...
* config/aarch64/sjlj.S (_ITM_beginTransaction): Use post-inc
addressing mode in epilogue.
From-SVN: r213035
2014-07-24 19:58:06 -07:00
b17f08ddf9
libitm: Enable aarch64
...
From-SVN: r210615
2014-05-19 07:41:18 -07:00
5e1f630ae8
Check if GCC uses assembler cfi support
...
* config/generic/asmcfi.h: Also check for
__GCC_HAVE_DWARF2_CFI_ASM.
From-SVN: r209242
2014-04-09 14:49:59 +00:00
84c2f4b068
libitm: Remove unused PAGE_SIZE macros
...
* config/alpha/target.h (PAGE_SIZE, FIXED_PAGE_SIZE): Remove.
* config/arm/target.h, config/sh/target.h: Likewise.
* config/sparc/target.h, config/x86/target.h: Likewise.
From-SVN: r209027
2014-04-02 10:49:36 -07:00
7cc51d643e
futex_bits.h: Include errno.h.
...
* config/linux/futex_bits.h: Include errno.h.
(sys_futex0): If syscall returns -1, return -errno rather than
-1.
From-SVN: r208855
2014-03-26 22:52:16 +01:00
f93608e6d4
Update copyright years in libitm/
...
From-SVN: r206298
2014-01-02 22:26:00 +00:00
b54214fe22
rs6000.h (RS6000_SAVE_AREA): Handle ABI_ELFv2.
...
gcc/ChangeLog:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.h (RS6000_SAVE_AREA): Handle ABI_ELFv2.
(RS6000_SAVE_TOC): Remove.
(RS6000_TOC_SAVE_SLOT): New macro.
* config/rs6000/rs6000.c (rs6000_parm_offset): New function.
(rs6000_parm_start): Use it.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_emit_prologue): Use RS6000_TOC_SAVE_SLOT.
(rs6000_emit_epilogue): Likewise.
(rs6000_call_aix): Likewise.
(rs6000_output_function_prologue): Do not save/restore r11
around calling _mcount for ABI_ELFv2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000-protos.h (rs6000_reg_parm_stack_space):
Add prototype.
* config/rs6000/rs6000.h (RS6000_REG_SAVE): Remove.
(REG_PARM_STACK_SPACE): Call rs6000_reg_parm_stack_space.
* config/rs6000/rs6000.c (rs6000_parm_needs_stack): New function.
(rs6000_function_parms_need_stack): Likewise.
(rs6000_reg_parm_stack_space): Likewise.
(rs6000_function_arg): Do not replace BLKmode by Pmode when
returning a register argument.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Michael Gschwind <mkg@us.ibm.com>
* config/rs6000/rs6000.h (FP_ARG_MAX_RETURN): New macro.
(ALTIVEC_ARG_MAX_RETURN): Likewise.
(FUNCTION_VALUE_REGNO_P): Use them.
* config/rs6000/rs6000.c (TARGET_RETURN_IN_MSB): Define.
(rs6000_return_in_msb): New function.
(rs6000_return_in_memory): Handle ELFv2 homogeneous aggregates.
Handle aggregates of up to 16 bytes for ELFv2.
(rs6000_function_value): Handle ELFv2 homogeneous aggregates.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Michael Gschwind <mkg@us.ibm.com>
* config/rs6000/rs6000.h (AGGR_ARG_NUM_REG): Define.
* config/rs6000/rs6000.c (rs6000_aggregate_candidate): New function.
(rs6000_discover_homogeneous_aggregate): Likewise.
(rs6000_function_arg_boundary): Handle homogeneous aggregates.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_function_arg): Likewise.
(rs6000_arg_partial_bytes): Likewise.
(rs6000_psave_function_arg): Handle BLKmode arguments.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Michael Gschwind <mkg@us.ibm.com>
* config/rs6000/rs6000.h (AGGR_ARG_NUM_REG): Define.
* config/rs6000/rs6000.c (rs6000_aggregate_candidate): New function.
(rs6000_discover_homogeneous_aggregate): Likewise.
(rs6000_function_arg_boundary): Handle homogeneous aggregates.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_function_arg): Likewise.
(rs6000_arg_partial_bytes): Likewise.
(rs6000_psave_function_arg): Handle BLKmode arguments.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (machine_function): New member
r2_setup_needed.
(rs6000_emit_prologue): Set r2_setup_needed if necessary.
(rs6000_output_mi_thunk): Set r2_setup_needed.
(rs6000_output_function_prologue): Output global entry point
prologue and local entry point marker if needed for ABI_ELFv2.
Output -mprofile-kernel code here.
(output_function_profiler): Do not output -mprofile-kernel
code here; moved to rs6000_output_function_prologue.
(rs6000_file_start): Output ".abiversion 2" for ABI_ELFv2.
(rs6000_emit_move): Do not handle dot symbols for ABI_ELFv2.
(rs6000_output_function_entry): Likewise.
(rs6000_assemble_integer): Likewise.
(rs6000_elf_encode_section_info): Likewise.
(rs6000_elf_declare_function_name): Do not create dot symbols
or .opd section for ABI_ELFv2.
(rs6000_trampoline_size): Update for ABI_ELFv2 trampolines.
(rs6000_trampoline_init): Likewise.
(rs6000_elf_file_end): Call file_end_indicate_exec_stack
for ABI_ELFv2.
(rs6000_call_aix): Handle ELFv2 indirect calls. Do not check
for function descriptors in ABI_ELFv2.
* config/rs6000/rs6000.md ("*call_indirect_aix<mode>"): Support
on ABI_AIX only, not ABI_ELFv2.
("*call_value_indirect_aix<mode>"): Likewise.
("*call_indirect_elfv2<mode>"): New pattern.
("*call_value_indirect_elfv2<mode>"): Likewise.
* config/rs6000/predicates.md ("symbol_ref_operand"): Do not
check for function descriptors in ABI_ELFv2.
("current_file_function_operand"): Likewise.
* config/rs6000/ppc-asm.h [__powerpc64__ && _CALL_ELF == 2]:
(toc): Undefine.
(FUNC_NAME): Define ELFv2 variant.
(JUMP_TARGET): Likewise.
(FUNC_START): Likewise.
(HIDDEN_FUNC): Likewise.
(FUNC_END): Likeiwse.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config.gcc [powerpc*-*-* | rs6000-*-*]: Support --with-abi=elfv1
and --with-abi=elfv2.
* config/rs6000/option-defaults.h (OPTION_DEFAULT_SPECS): Add "abi".
* config/rs6000/rs6000.opt (mabi=elfv1): New option.
(mabi=elfv2): Likewise.
* config/rs6000/rs6000-opts.h (enum rs6000_abi): Add ABI_ELFv2.
* config/rs6000/linux64.h (DEFAULT_ABI): Do not hard-code to AIX_ABI
if !RS6000_BI_ARCH.
(ELFv2_ABI_CHECK): New macro.
(SUBSUBTARGET_OVERRIDE_OPTIONS): Use it to decide whether to set
rs6000_current_abi to ABI_AIX or ABI_ELFv2.
(GLIBC_DYNAMIC_LINKER64): Support ELFv2 ld.so version.
* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Predefine
_CALL_ELF and __STRUCT_PARM_ALIGN__ if appropriate.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Handle ABI_ELFv2.
(debug_stack_info): Likewise.
(rs6000_file_start): Treat ABI_ELFv2 the same as ABI_AIX.
(rs6000_legitimize_tls_address): Likewise.
(rs6000_conditional_register_usage): Likewise.
(rs6000_emit_move): Likewise.
(init_cumulative_args): Likewise.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_function_arg): Likewise.
(rs6000_arg_partial_bytes): Likewise.
(rs6000_output_function_entry): Likewise.
(rs6000_assemble_integer): Likewise.
(rs6000_savres_strategy): Likewise.
(rs6000_stack_info): Likewise.
(rs6000_function_ok_for_sibcall): Likewise.
(rs6000_emit_load_toc_table): Likewise.
(rs6000_savres_routine_name): Likewise.
(ptr_regno_for_savres): Likewise.
(rs6000_emit_prologue): Likewise.
(rs6000_emit_epilogue): Likewise.
(rs6000_output_function_epilogue): Likewise.
(output_profile_hook): Likewise.
(output_function_profiler): Likewise.
(rs6000_trampoline_size): Likewise.
(rs6000_trampoline_init): Likewise.
(rs6000_elf_output_toc_section_asm_op): Likewise.
(rs6000_elf_encode_section_info): Likewise.
(rs6000_elf_reloc_rw_mask): Likewise.
(rs6000_elf_declare_function_name): Likewise.
(rs6000_function_arg_boundary): Treat ABI_ELFv2 the same as ABI_AIX,
except that rs6000_compat_align_parm is always assumed false.
(rs6000_gimplify_va_arg): Likewise.
(rs6000_call_aix): Update comment.
(rs6000_sibcall_aix): Likewise.
* config/rs6000/rs6000.md ("tls_gd_aix<TLSmode:tls_abi_suffix>"):
Treat ABI_ELFv2 the same as ABI_AIX.
("*tls_gd_call_aix<TLSmode:tls_abi_suffix>"): Likewise.
("tls_ld_aix<TLSmode:tls_abi_suffix>"): Likewise.
("*tls_ld_call_aix<TLSmode:tls_abi_suffix>"): Likewise.
("load_toc_aix_si"): Likewise.
("load_toc_aix_di"): Likewise.
("call"): Likewise.
("call_value"): Likewise.
("*call_local_aix<mode>"): Likewise.
("*call_value_local_aix<mode>"): Likewise.
("*call_nonlocal_aix<mode>"): Likewise.
("*call_value_nonlocal_aix<mode>"): Likewise.
("*call_indirect_aix<mode>"): Likewise.
("*call_value_indirect_aix<mode>"): Likewise.
("sibcall"): Likewise.
("sibcall_value"): Likewise.
("*sibcall_aix<mode>"): Likewise.
("*sibcall_value_aix<mode>"): Likewise.
* config/rs6000/predicates.md ("symbol_ref_operand"): Likewise.
("current_file_function_operand"): Likewise.
gcc/testsuite/ChangeLog:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* gcc.target/powerpc/ppc64-abi-1.c (stack_frame_t): Remove
compiler and linker field if _CALL_ELF == 2.
* gcc.target/powerpc/ppc64-abi-2.c (stack_frame_t): Likewise.
* gcc.target/powerpc/ppc64-abi-dfp-1.c (stack_frame_t): Likewise.
* gcc.dg/stack-usage-1.c (SIZE): Update value for _CALL_ELF == 2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* gcc.target/powerpc/ppc64-abi-dfp-1.c (FUNC_START): New macro.
(WRAPPER): Use it.
* gcc.target/powerpc/no-r11-1.c: Skip on powerpc_elfv2.
* gcc.target/powerpc/no-r11-2.c: Skip on powerpc_elfv2.
* gcc.target/powerpc/no-r11-3.c: Skip on powerpc_elfv2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* lib/target-supports.exp (check_effective_target_powerpc_elfv2):
New function.
* gcc.target/powerpc/pr57949-1.c: Disable for powerpc_elfv2.
* gcc.target/powerpc/pr57949-2.c: Likewise.
libgcc/ChangeLog:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/linux-unwind.h (TOC_SAVE_SLOT): Define.
(frob_update_context): Use it.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/tramp.S [__powerpc64__ && _CALL_ELF == 2]:
(trampoline_initial): Provide ELFv2 variant.
(__trampoline_setup): Likewise.
* config/rs6000/linux-unwind.h (frob_update_context): Do not
check for AIX indirect function call sequence if _CALL_ELF == 2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/linux-unwind.h (get_regs): Do not support
old kernel versions if _CALL_ELF == 2.
(frob_update_context): Do not support PLT stub variants only
generated by old linkers if _CALL_ELF == 2.
libitm/ChangeLog:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/powerpc/sjlj.S [__powerpc64__ && _CALL_ELF == 2]:
(FUNC): Define ELFv2 variant.
(END): Likewise.
(HIDDEN): Likewise.
(CALL): Likewise.
(BASE): Likewise.
(LR_SAVE): Likewise.
libstdc++/ChangeLog:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* scripts/extract_symvers.in: Ignore <localentry: > fields
in readelf --symbols output.
Co-Authored-By: Alan Modra <amodra@gmail.com>
Co-Authored-By: Michael Gschwind <mkg@us.ibm.com>
From-SVN: r204808
2013-11-14 18:50:48 +00:00
6fb471d812
libitm: Fix wrong initialization order introduced with r202101.
...
* config/posix/rwlock.cc: Fix initialization order.
From-SVN: r202116
2013-08-30 17:13:05 +00:00
bec9ec3fc1
Add custom HTM fast path for RTM on x86_64.
...
* libitm_i.h (gtm_thread): Assign an asm name to serial_lock.
(htm_fastpath): Assign an asm name.
* libitm.h (_ITM_codeProperties): Add non-ABI flags used by custom
HTM fast paths.
(_ITM_actions): Likewise.
* config/x86/target.h (HTM_CUSTOM_FASTPATH): Enable custom fastpath on
x86_64.
* config/x86/sjlj.S (_ITM_beginTransaction): Add custom HTM fast path.
* config/posix/rwlock.h (gtm_rwlock): Update comments. Move summary
field to the start of the structure.
* config/linux/rwlock.h (gtm_rwlock): Update comments.
* beginend.cc (gtm_thread::begin_transaction): Add retry policy
handling for custom HTM fast paths.
From-SVN: r202101
2013-08-30 10:33:41 +00:00
aaaffb2a0d
2013-07-29 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/s390/target.h (htm_begin, htm_commit, htm_abort)
(htm_transaction_active): Enable zEC12 instructions in the
assembler.
* configure.tgt: Remove -Wa,-march=zEC12 from XCFLAGS.
From-SVN: r201301
2013-07-29 08:03:38 +00:00
167f68ede4
s390.c: (s390_expand_builtin): Allow -mhtm to be enabled without -march=zEC12.
...
2013-07-17 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/s390/s390.c: (s390_expand_builtin): Allow -mhtm to be
enabled without -march=zEC12.
* config/s390/s390.h (TARGET_HTM): Do not require EC12 machine
flags to be set.
2013-07-17 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* acinclude.m4: Add htm asm check for s390.
* configure.tgt: Add -mhtm and -Wa,-march=zEC12 to the options.
* configure: Regenerate.
* config/s390/target.h: Remove __HTM__ check.
(htm_available): Call getauxval to get hwcaps and check whether
HTM is available or not.
From-SVN: r201004
2013-07-17 11:15:24 +00:00
0258b6e466
acinclude.m4 (LIBITM_CHECK_AS_HTM): New.
...
libitm/
* acinclude.m4 (LIBITM_CHECK_AS_HTM): New.
* configure.ac: Use it.
(AC_CHECK_HEADERS): Check for sys/auxv.h.
(AC_CHECK_FUNCS): Check for getauxval.
* config.h.in, configure: Rebuild.
* configure.tgt (target_cpu): Add -mhtm to XCFLAGS.
* config/powerpc/target.h: Include sys/auxv.h and htmintrin.h.
(USE_HTM_FASTPATH): Define.
(_TBEGIN_STARTED, _TBEGIN_INDETERMINATE, _TBEGIN_PERSISTENT,
_HTM_RETRIES) New macros.
(htm_abort, htm_abort_should_retry, htm_available, htm_begin, htm_init,
htm_begin_success, htm_commit, htm_transaction_active): New functions.
gcc/
* config.gcc (powerpc*-*-*): Install htmintrin.h and htmxlintrin.h.
* config/rs6000/t-rs6000 (MD_INCLUDES): Add htm.md.
* config/rs6000/rs6000.opt: Add -mhtm option.
* config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Add OPTION_MASK_HTM.
(ISA_2_7_MASKS_SERVER): Add OPTION_MASK_HTM.
* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
__HTM__ if the HTM instructions are available.
* config/rs6000/predicates.md (u3bit_cint_operand, u10bit_cint_operand,
htm_spr_reg_operand): New define_predicates.
* config/rs6000/rs6000.md (define_attr "type"): Add htm.
(TFHAR_REGNO, TFIAR_REGNO, TEXASR_REGNO): New define_constants.
Include htm.md.
* config/rs6000/rs6000-builtin.def (BU_HTM_0, BU_HTM_1, BU_HTM_2,
BU_HTM_3, BU_HTM_SPR0, BU_HTM_SPR1): Add support macros for defining
HTM builtin functions.
* config/rs6000/rs6000.c (RS6000_BUILTIN_H): New macro.
(rs6000_reg_names, alt_reg_names): Add HTM SPR register names.
(rs6000_init_hard_regno_mode_ok): Add support for HTM instructions.
(rs6000_builtin_mask_calculate): Likewise.
(rs6000_option_override_internal): Likewise.
(bdesc_htm): Add new HTM builtin support.
(htm_spr_num): New function.
(htm_spr_regno): Likewise.
(rs6000_htm_spr_icode): Likewise.
(htm_expand_builtin): Likewise.
(htm_init_builtins): Likewise.
(rs6000_expand_builtin): Add support for HTM builtin functions.
(rs6000_init_builtins): Likewise.
(rs6000_invalid_builtin, rs6000_opt_mask): Add support for -mhtm option.
* config/rs6000/rs6000.h (ASM_CPU_SPEC): Add support for -mhtm.
(TARGET_HTM, MASK_HTM): Define macros.
(FIRST_PSEUDO_REGISTER): Adjust for new HTM SPR registers.
(FIXED_REGISTERS): Likewise.
(CALL_USED_REGISTERS): Likewise.
(CALL_REALLY_USED_REGISTERS): Likewise.
(REG_ALLOC_ORDER): Likewise.
(enum reg_class): Likewise.
(REG_CLASS_NAMES): Likewise.
(REG_CLASS_CONTENTS): Likewise.
(REGISTER_NAMES): Likewise.
(ADDITIONAL_REGISTER_NAMES): Likewise.
(RS6000_BTC_SPR, RS6000_BTC_VOID, RS6000_BTC_32BIT, RS6000_BTC_64BIT,
RS6000_BTC_MISC_MASK, RS6000_BTM_HTM): New macros.
(RS6000_BTM_COMMON): Add RS6000_BTM_HTM.
* config/rs6000/htm.md: New file.
* config/rs6000/htmintrin.h: New file.
* config/rs6000/htmxlintrin.h: New file.
gcc/testsuite/
* lib/target-supports.exp (check_effective_target_powerpc_htm_ok): New
function to test if HTM is available.
* gcc.target/powerpc/htm-xl-intrin-1.c: New test.
* gcc.target/powerpc/htm-builtin-1.c: New test.
From-SVN: r200960
2013-07-15 12:23:49 -05:00
5a3fe9b607
s390.c: Rename UNSPEC_CCU_TO_INT to UNSPEC_STRCMPCC_TO_INT and UNSPEC_CCZ_TO_INT to...
...
2013-06-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/s390/s390.c: Rename UNSPEC_CCU_TO_INT to
UNSPEC_STRCMPCC_TO_INT and UNSPEC_CCZ_TO_INT to UNSPEC_CC_TO_INT.
(struct machine_function): Add tbegin_p.
(s390_canonicalize_comparison): Fold CC mode compares to
conditional jump if possible.
(s390_emit_jump): Return the emitted jump.
(s390_branch_condition_mask, s390_branch_condition_mnemonic):
Handle CCRAWmode compares.
(s390_option_override): Default to -mhtm if available.
(s390_reg_clobbered_rtx): Handle floating point regs as well.
(s390_regs_ever_clobbered): Use s390_regs_ever_clobbered also for
FPRs instead of df_regs_ever_live_p.
(s390_optimize_nonescaping_tx): New function.
(s390_init_frame_layout): Extend clobbered_regs array to cover
FPRs as well.
(s390_emit_prologue): Call s390_optimize_nonescaping_tx.
(s390_expand_tbegin): New function.
(enum s390_builtin): New enum definition.
(code_for_builtin): New array definition.
(s390_init_builtins): New function.
(s390_expand_builtin): New function.
(TARGET_INIT_BUILTINS): Define.
(TARGET_EXPAND_BUILTIN): Define.
* common/config/s390/s390-common.c (processor_flags_table): Add
PF_TX.
* config/s390/predicates.md (s390_comparison): Handle CCRAWmode.
(s390_alc_comparison): Likewise.
* config/s390/s390-modes.def: Add CCRAWmode.
* config/s390/s390.h (processor_flags): Add PF_TX.
(TARGET_CPU_HTM): Define macro.
(TARGET_HTM): Define macro.
(TARGET_CPU_CPP_BUILTINS): Define __HTM__ for htm.
* config/s390/s390.md: Rename UNSPEC_CCU_TO_INT to
UNSPEC_STRCMPCC_TO_INT and UNSPEC_CCZ_TO_INT to UNSPEC_CC_TO_INT.
(UNSPECV_TBEGIN, UNSPECV_TBEGINC, UNSPECV_TEND, UNSPECV_TABORT)
(UNSPECV_ETND, UNSPECV_NTSTG, UNSPECV_PPA): New unspecv enum
values.
(TBEGIN_MASK, TBEGINC_MASK): New constants.
("*cc_to_int"): Move up.
("*mov<mode>cc", "*cjump_64", "*cjump_31"): Accept integer
constants other than 0.
("*ccraw_to_int"): New insn and splitter definition.
("tbegin", "tbegin_nofloat", "tbegin_retry")
("tbegin_retry_nofloat", "tbeginc", "tend", "tabort")
("tx_assist"): New expander.
("tbegin_1", "tbegin_nofloat_1", "*tbeginc_1", "*tend_1")
("*tabort_1", "etnd", "ntstg", "*ppa"): New insn definition.
* config/s390/s390.opt: Add -mhtm option.
* config/s390/s390-protos.h (s390_emit_jump): Add return type.
* config/s390/htmxlintrin.h: New file.
* config/s390/htmintrin.h: New file.
* config/s390/s390intrin.h: New file.
* doc/extend.texi: Document htm builtins.
* config.gcc: Add the new header files to extra_headers.
2013-06-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gcc.target/s390/htm-1.c: New file.
* gcc.target/s390/htm-nofloat-1.c: New file.
* gcc.target/s390/htm-xl-intrin-1.c: New file.
2013-06-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/s390/target.h: Include htmintrin.h.
(_HTM_ITM_RETRIES): New macro definition.
(htm_available, htm_init, htm_begin, htm_begin_success)
(htm_commit, htm_abort, htm_abort_should_retry): New functions.
From-SVN: r200454
2013-06-27 07:44:11 +00:00
480c696bb0
libitm: Handle HTM fastpath in status query functions.
...
* query.cc (_ITM_inTransaction): Abort when using the HTM fastpath.
(_ITM_getTransactionId): Same.
* config/x86/target.h (htm_transaction_active): New.
From-SVN: r200251
2013-06-20 16:40:54 +00:00
Jakub Jelinek
Alan Modra
Szabolcs Nagy
Jakub Jelinek
Christophe Lyon
Peter Bergner
Jeff Law
Sergei Trofimovich
H.J. Lu
Igor Tsimbalist
Uros Bizjak
Torvald Riegel
Dominik Vogt
Richard Henderson
Daniel Jacobowitz
Carlos Sánchez de La Lama
Uros Bizjak
Gregor Richards
Rainer Orth
Richard Sandiford
Ulrich Weigand
Andreas Krebbel
Peter Bergner