2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
gcc/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* aclocal.m4 (gcc_AC_PROG_LN): Remove.
(gcc_AC_CHECK_DECLS): Use AH_TEMPLATE to generate
config.in entries.
* configure.ac: Call ACX_PROG_LN, falling back to $LN_S
if hard links are not available.
* configure: Regenerate.
* config.in: Regenerate.
From-SVN: r82816
2004-06-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
From-SVN: r82534
(STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
(NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
targets.
* Makefile.in: Regenerate.
From-SVN: r82257
ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): add libcpp.
* Makefile.tpl: Add dependencies on and for libcpp.
* Makefile.in: Regenerate.
* configure.in: Add libcpp host module.
* configure: Regenerate.
config/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_HEADER_STDBOOL, ACX_HEADER_STRING):
From gcc.
gcc/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
Move libcpp to the toplevel.
* Makefile.in: Remove references to libcpp files,
use CPPLIBS instead of libcpp.a. Define SYMTAB_H
and change hashtable.h to that.
* aclocal.m4 (gcc_AC_HEADER_STDBOOL,
gcc_AC_HEADER_STRING, gcc_AC_C__BOOL): Remove.
* configure.ac (gcc_AC_C__BOOL, HAVE_UCHAR): Remove tests.
* configure: Regenerate.
* config.in: Regenerate.
* c-ppoutput.c: Include ../libcpp/internal.h instead of cpphash.h.
* cppcharset.c: Removed.
* cpperror.c: Removed.
* cppexp.c: Removed.
* cppfiles.c: Removed.
* cpphash.c: Removed.
* cpphash.h: Removed.
* cppinit.c: Removed.
* cpplex.c: Removed.
* cpplib.c: Removed.
* cpplib.h: Removed.
* cppmacro.c: Removed.
* cpppch.c: Removed.
* cpptrad.c: Removed.
* cppucnid.h: Removed.
* cppucnid.pl: Removed.
* cppucnid.tab: Removed.
* hashtable.c: Removed.
* hashtable.h: Removed.
* line-map.c: Removed.
* line-map.h: Removed.
* mkdeps.c: Removed.
* mkdeps.h: Removed.
* stringpool.h: Include symtab.h instead of hashtable.h.
* tree.h: Include symtab.h instead of hashtable.h.
* system.h (O_NONBLOCK, O_NOCTTY): Do not define.
gcc/cp/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* Make-lang.in: No need to specify $(LIBCPP).
gcc/java/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* Make-lang.in: Link in $(LIBCPP) instead of mkdeps.o.
libcpp/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
Moved libcpp from the gcc subdirectory to the toplevel.
* Makefile.am: New file.
* Makefile.in: Regenerate.
* configure.ac: New file.
* configure: Regenerate.
* config.in: Regenerate.
* charset.c: Moved from gcc/cppcharset.c. Add note about
brokenness of input charset detection. Adjust for change
in name of cppucnid.h.
* errors.c: Moved from gcc/cpperror.c. Do not include intl.h.
* expr.c: Moved from gcc/cppexp.c.
* files.c: Moved from gcc/cppfiles.c. Do not include intl.h.
Remove #define of O_BINARY, it is in system.h.
* identifiers.c: Moved from gcc/cpphash.c.
* internal.h: Moved from gcc/cpphash.h. Change header
guard name. All other files adjusted to match name change.
* init.c: Moved from gcc/cppinit.c.
(init_library) [ENABLE_NLS]: Call bindtextdomain.
* lex.c: Moved from gcc/cpplex.c.
* directives.c: Moved from gcc/cpplib.c.
* macro.c: Moved from gcc/cppmacro.c.
* pch.c: Moved from gcc/cpppch.c. Do not include intl.h.
* traditional.c: Moved from gcc/cpptrad.c.
* ucnid.h: Moved from gcc/cppucnid.h. Change header
guard name.
* ucnid.pl: Moved from gcc/cppucnid.pl.
* ucnid.tab: Moved from gcc/cppucnid.tab. Change header
guard name.
* symtab.c: Moved from gcc/hashtable.c.
* line-map.c: Moved from gcc. Do not include intl.h.
* mkdeps.c: Moved from gcc.
* system.h: New file.
libcpp/include/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* cpplib.h: Moved from gcc. Change header guard name.
* line-map.h: Moved from gcc. Change header guard name.
* mkdeps.h: Moved from gcc. Change header guard name.
* symtab.h: Moved from gcc/hashtable.h. Change header
guard name.
libcpp/po/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* be.po: Extracted from gcc/po/be.po.
* ca.po: Extracted from gcc/po/ca.po.
* da.po: Extracted from gcc/po/da.po.
* de.po: Extracted from gcc/po/de.po.
* el.po: Extracted from gcc/po/el.po.
* es.po: Extracted from gcc/po/es.po.
* fr.po: Extracted from gcc/po/fr.po.
* ja.po: Extracted from gcc/po/ja.po.
* nl.po: Extracted from gcc/po/nl.po.
* sv.po: Extracted from gcc/po/sv.po.
* tr.po: Extracted from gcc/po/tr.po.
From-SVN: r82199
2004-05-21 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl: Whenever a recursive target is defined, wrap
it in a special @if/@endif block, and prepare its maybe
dependency in the @if/@endif block
* configure.in: Instead of writing maybe dependencies, remove
the @if/@endif statements, and remove the @if/@endif blocks
that remain.
* Makefile.in: Regenerate.
* configure: Regenerate.
From-SVN: r82088
top:
* Makefile.def, Makefile.tpl, configure.in: Remove all mention
of libf2c.
* configure, Makefile.in: Regenerate.
contrib:
* gcc_update: Remove gcc/f/intdoc.texi and all libf2c files
from list of files to be touched.
* convert_to_f2c, convert_to_g2c, download_f2c: Delete.
gcc:
* f: Entire directory removed
* c-common.h (CTI_G77_INTEGER_TYPE, CTI_G77_UINTEGER_TYPE)
(CTI_G77_LONGINT_TYPE, CTI_G77_ULONGINT_TYPE)
(g77_integer_type_node, g77_uinteger_type_node)
(g77_longint_type_node, or g77_ulongint_type_node): Delete.
* c-common.c (c_common_nodes_and_builtins): Do not initialize
the above set of variables.
* config/i386/uwin.h: No need to define WIN32_UWIN_TARGET.
* doc/invoke.texi, doc/standards.texi: Remove cross-references
to g77 manual.
gcc/po:
* exgettext (spec_error_string): Do not scan beyond the end of
the string for a close brace. Do not bail out at the first
incidence of %%e.
* gcc.pot: Regenerate.
From-SVN: r81967
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
From-SVN: r81185
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
From-SVN: r81183
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
From-SVN: r81130
PR bootstrap/14871
* Makefile.tpl: If we don't have built-in-tree target tools,
use the ones found by configure rather than hacking around with
program_transform_name.
* configure.in: Give Makefile.tpl the information necessary
to do that.
* Makefile.in: Regenerate.
* configure: Regenerate.
From-SVN: r80542
* Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
for stages 2 and 3 as well as in make. As a consequence, remove
OUTPUT_OPTION (now detected by configure) from the flags passed down
to make.
* Makefile.in: Regenerate.
From-SVN: r79892
language setting from all- target to configure- target; disable
intermodule optimization in stage 1; prevent gratuitous rebuilds
of stage 1.
* Makefile.in: Regenerate.
* configure.in: Comma-separate stage 1 language list for top
level bootstrap.
* configure: Regenerate.
From-SVN: r79816
2004-03-22 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.tpl: Clean up experimental top level bootstrap support:
note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
prev-gcc in configure- targets as well as all- targets.
* Makefile.in: Regenerate.
From-SVN: r79812
* configure.in: Use ./config.cache, not config.cache.
* configure: Regenerate.
* Makefile.tpl: Special-casing not needed for GCC any more.
* Makefile.in: Regenerate.
From-SVN: r75413
2003-07-31 Geoffrey Keating <geoffk@apple.com>
* Makefile.tpl (libsubdir): Use gcc instead of gcc-lib.
* Makefine.in: Update.
Index: gcc/ChangeLog
2003-07-31 Geoffrey Keating <geoffk@apple.com>
* Makefile.in (libexecdir): New.
(libsubdir): Use gcc instead of gcc-lib.
(libexecsubdir): New.
(ORDINARY_FLAGS_TO_PASS): Add libexecsubdir.
(DRIVER_DEFINES): Add STANDARD_LIBEXEC_PREFIX, use gcc instead of
gcc-lib.
(installdirs): Make libexecsubdir.
(install-common): Put executables in libexecsubdir.
(itoolsdir): Use libexecsubdir.
(itoolsdatadir): New.
(install-mkheaders): Separate data files and executables.
(install-collect2): Put executables in libexecsubdir.
(uninstall): Remove libexecsubdir.
* mkheaders.in: Update for new arrangement of files.
(libexecdir): New.
(libexecsubdir): New.
(itoolsdir): Use libexecsubdir.
(itoolsdatadir): New.
* gcc.c (gcc_libexec_prefix): New.
(STANDARD_LIBEXEC_PREFIX): Use gcc instead of gcc-lib.
(standard_exec_prefix_1): Use libexec.
(standard_exec_prefix_2): New.
(standard_libexec_prefix): New.
(process_command): Update for new arrangement of files. Compute
gcc_libexec_prefix. Update for change from gcc-lib to gcc.
From-SVN: r70024
* Makefile.tpl: Use 'mkinstalldirs' rather than 'mkdir' when
creating target and build subdirs to build all parent dirs as needed.
* Makefile.in: Rebuild.
* configure.in: Don't build dirs explicitly here.
* configure: Rebuild.
From-SVN: r69871
top:
* Makefile.tpl (configure-gcc): Depend on maybe-configure-intl.
* Makefile.in: Regenerate.
config:
* gettext.m4: Delete all former contents.
(ZW_GNU_GETTEXT_SISTER_DIR): New macro.
* progtest.m4: New file.
gcc:
* Makefile.in (top_builddir): Set to "..", not ".".
(INTLLIBS, INTLDEPS): Delete.
(LIBINTL, LIBINTL_DEP, LIBICONV_DEP): New variables to be substituted.
(LIBDEPS): Add $(LIBICONV_DEP).
(LIBS): Take out $(INTLLIBS), add $(LIBINTL) and $(LIBICONV).
(INCLUDES): Replace -I../intl with @INCINTL@.
($(top_builddir)/intl/libintl.a): Delete rule.
(stage2-start, stage3-start, stage4-start, stageprofile-start,
stagefeedback-start): Use $$ for variable to be evaluated by
shell, not make.
* acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_GETTEXT,
HAVE_LC_MESSAGES, HAVE_STPCPY): Delete.
* aclocal.m4: sinclude ../config/progtest.m4. Add
contents of lcmessage.m4 from gettext distro.
* configure.in: Check for wchar.h and setlocale. Set
LIBICONV_DEP to the empty string and substitute it.
Call AM_LC_MESSAGES. Delete AC_ARG_ENABLE for --enable-nls;
this is handled elsewhere. Use ZW_GNU_GETTEXT_SISTER_DIR,
not CY_GNU_GETTEXT. Clear $LIBICONV if its text is included
in $LIBINTL, to avoid linking it twice.
* configure, config.in: Regenerate.
intl:
* README: Update.
* Makefile.in (INSTALL, INSTALL_DATA, MKINSTALLDIRS,
mkinstalldirs, gettextsrcdir, l): Delete.
(COMPILE): Add $(DEFS-$@), remove $(XCFLAGS).
(HEADERS): libgnuintl.h not libgnuintl.h.in. Remove os2compat.h.
(SOURCES): Remove os2compat.c.
(DEFS-dcigettext.o, DEFS-localealias.o, DEFS-localcharset.o,
DEFS-relocatable.o): New.
(all-yes): Add config.intl.
(libintl.h): Use cp, not cat.
(INCLUDES): Remove -I..
(TAGS, CTAGS, ID): Word wrap.
(mostlyclean, distclean): Remove junk.
(config.intl): New rule.
* aclocal.m4: sinclude ../config/progtest.m4 instead of
including it inline.
* config.intl.in: New file.
* configure.in: Take out unnecessary AC_CONFIG_AUX_DIR.
Take out AC_DEFINEs for LOCALEDIR, LOCALE_ALIAS_PATH,
LIBDIR, INSTALLDIR. Set LIBINTL_DEP and INCINTL and AC_SUBST
them. Add config.intl to AC_OUTPUT.
* os2compat.c, os2compat.h: Delete, unused.
From-SVN: r69071
top:
* intl: New directory; see intl/ChangeLog for details.
* ABOUT-NLS, config.rpath: Import from gettext 0.12.1.
* Makefile.tpl: all-gcc depends on maybe-all-intl.
* Makefile.in: Regenerate.
config:
* gettext.m4: New file - copy of gettext.m4 from binutils
CVS, with added AC_ISC_POSIX macro from gcc/aclocal.m4.
gcc:
* ABOUT-NLS: Delete.
* intl: Delete entire directory.
* aclocal.m4: Include ../config/gettext.m4. Delete
AC_ISC_POSIX, AM_LANGINFO_CODESET, jm_GLIBC21, AM_LC_MESSAGES,
AM_PATH_PROG_WITH_TEST, AM_WITH_NLS, and AM_GNU_GETTEXT.
* configure.in: Use CY_GNU_GETTEXT, not AM_GNU_GETTEXT.
Remove intl/Makefile from all_outputs.
* configure, config.in: Regenerate.
* Makefile.in: Expunge all references to intl subdirectory.
Add -I../intl to INCLUDES.
* intl.h: Include libintl.h if and only if ENABLE_NLS is defined.
intl:
* Makefile.in: Remove unnecessary capabilities for
installation, build of shared libraries, generation of
distribution tarballs, etc. Fix all the places that rely on
the parent directory. Don't generate libgnuintl.h from
anything; do generate $(objdir)/libintl.h from libgnuintl.h if
necessary. Adjust DEFS for use of config.h.
* libgnuintl.h.in: Rename libgnuintl.h.
* README: New file.
* config.charset, ref-add.sin, ref-del.sin: Delete (unused).
* COPYING.LIB-2.0, COPYING.LIB-2.1: Delete (redundant).
* aclocal.m4: New; generated per instructions in gettext manual.
* configure.in: New; written from scratch for this configuration.
* configure, config.h.in: Generated.
contrib:
* gcc_update: Remove gcc/intl/plural.c from list.
Add new generated files intl/plural.c, intl/configure,
intl/config.h.in.
From-SVN: r68928
