Softfloat single precision and double precision floating-point
multiplication routines in libgcc share some code with the
floating-point division of their corresponding precision. As the code
is structured now, this leads to *all* division code being pulled in an
executable in softfloat mode even if only multiplication is
performed.
This patch create some new LIB1ASMFUNCS macros to also build files with
just the multiplication and shared code as weak symbols. By putting
these earlier in the static library, they can then be picked up when
only multiplication is used and they are overriden by the global
definition in the existing file containing both multiplication and
division code when division is needed.
The patch also removes changes made to the FUNC_START and ARM_FUNC_START
macros in r218124 since the intent was to put multiplication and
division code into their own section in a later patch to achieve the
same size optimization. That approach relied on specific section layout
to ensure multiplication and division were not too far from the shared
bit of code in order to the branches to be within range. Due to lack of
guarantee regarding section layout, in particular with all the
possibility of linker scripts, this approach was chosen instead. This
patch keeps the two testcases that were posted by Tony Wang on the mailing
list to implement this approach and adds a new one.
2018-12-19 Thomas Preud'homme <thomas.preudhomme@linaro.org>
libgcc/
* /config/arm/lib1funcs.S (FUNC_START): Remove unused sp_section
parameter and corresponding code.
(ARM_FUNC_START): Likewise in both definitions.
Also update footer comment about condition that need to match with
gcc/config/arm/elf.h to also include libgcc/config/arm/t-arm.
* config/arm/ieee754-df.S (muldf3): Also build it if L_arm_muldf3 is
defined. Weakly define it in this case.
* config/arm/ieee754-sf.S (mulsf3): Likewise with L_arm_mulsf3.
* config/arm/t-elf (LIB1ASMFUNCS): Build _arm_muldf3.o and
_arm_mulsf3.o before muldiv versions if targeting Thumb-1 only. Add
comment to keep condition in sync with the one in
libgcc/config/arm/lib1funcs.S and gcc/config/arm/elf.h.
gcc/
* config/arm/elf.h: Update comment about condition that need to
match with libgcc/config/arm/lib1funcs.S to also include
libgcc/config/arm/t-arm.
* doc/sourcebuild.texi (output-exists, output-exists-not): Rename
subsubsection these directives are in to "Check for output files".
Move scan-symbol to that section and add to it new scan-symbol-not
directive.
2018-12-19 Tony Wang <tony.wang@arm.com>
Thomas Preud'homme <thomas.preudhomme@linaro.org>
gcc/testsuite/
* lib/lto.exp (lto-execute): Define output_file and testname_with_flags
to same value as execname.
(scan-symbol): Move and rename to ...
* lib/gcc-dg.exp (scan-symbol-common): This. Adapt into a
helper function returning true or false if a symbol is present.
(scan-symbol): New procedure.
(scan-symbol-not): Likewise.
* gcc.target/arm/size-optimization-ieee-1.c: New testcase.
* gcc.target/arm/size-optimization-ieee-2.c: Likewise.
* gcc.target/arm/size-optimization-ieee-3.c: Likewise.
From-SVN: r267282
Currently, .cfi_endproc and FUNC_END(__trampoline_setup) are placed
inside the #else branch of an "#if defined (__VXWORKS__) ...", so
non-pic vxworks does not get proper CFI nor a .size directive for
__trampoline_setup. I assume there's no magic reason for that (which
would warrant a comment), so move them outside.
From-SVN: r267051
There are a few places in libgcc assembly where we don't emit call
frame information for functions, potentially breaking unwinding from
asynchronous signal handlers. This patch fixes them. Although I
patch tramp.S there is no attempt made to provide CFI for the actual
trampoline on the stack. Doing that would require generating CFI at
run time and both registering and deregistering it, which is probably
not worth doing since it would significantly slow down the call.
* config/rs6000/morestack.S (__stack_split_initialize),
(__morestack_get_guard, __morestack_set_guard),
(__morestack_make_guard): Provide CFI covering these functions.
* config/rs6000/tramp.S (__trampoline_setup): Likewise.
From-SVN: r266503
2018-11-13 Xianmiao Qu <xianmiao_qu@c-sky.com>
libgcc/
* config/csky/linux-unwind.h (_sig_ucontext_t): Remove.
(csky_fallback_frame_state): Modify the check of the
instructions to adapt to changes in the kernel
From-SVN: r266060
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
Just as one needs run-time initialization of mutexes, one needs to
destroy them properly to allow the OS to release resources associated
with the semaphore.
From-SVN: r265616
2018-10-24 Martin Liska <mliska@suse.cz>
* cgraph.c (cgraph_node::dump):
Remove reduntant dumps and make tp_first_run dump more compact.
2018-10-24 Martin Liska <mliska@suse.cz>
* libgcov-profiler.c: Start from 1 in order to distinguish
functions which were seen and these that were not.
From-SVN: r265454
* udivmodsi4.c (__udivmodsi4): Rename to conform to coding
standard.
* divmod.c: Update references to __udivmodsi4.
* udivmod.c: Ditto.
* udivhi3.c: New file.
* udivmodhi4.c: New file.
* config/pdp11/t-pdp11 (LIB2ADD): Add the new files.
From-SVN: r265277
One target file (config/c6x/t-elf) lists _printf and _gcc_bcmp in
LIB2FUNCS_EXCLUDE, but that does not have any effect, since those are
not filtered away from LIB2FUNCS_ST. Another option is to do as in
config/rl78/t-rl78, which explicitly sets LIB2FUNCS_ST
# Remove __gcc_bcmp from LIB2FUNCS_ST
LIB2FUNCS_ST = _eprintf
but honouring LIB2FUNCS_EXCLUDE also for LIB2FUNCS_ST seems more
natural.
From-SVN: r265246
2018-10-12 Olivier Hainque <hainque@adacore.com>
* config/rs6000/ibm-ldouble.c: Augment the toplevel guard with
defined (__FLOAT128_TYPE__) || defined (__LONG_DOUBLE_128__).
From-SVN: r265135
2018-10-04 Martin Liska <mliska@suse.cz>
PR gcov-profile/84107
* tree-profile.c (init_ic_make_global_vars):
Remove ic_void_ptr_var and ic_gcov_type_ptr_var.
Come up with new ic_tuple* variables. Emit
__gcov_indirect_call{,_topn} variables.
(gimple_gen_ic_profiler): Access the variable
and emit gimple.
(gimple_gen_ic_func_profiler): Access
__gcov_indirect_call.callee field.
(gimple_init_gcov_profiler): Use ptr_type_node.
* value-prof.c (gimple_ic): Use ptr_type_node.
2018-10-04 Martin Liska <mliska@suse.cz>
PR gcov-profile/84107
* libgcov-profiler.c (__gcov_indirect_call):
Change type to indirect_call_tuple.
(struct indirect_call_tuple): New struct.
(__gcov_indirect_call_topn_profiler): Change type.
(__gcov_indirect_call_profiler_v2): Use the new
variables.
* libgcov.h (struct indirect_call_tuple): New struct
definition.
From-SVN: r264840
2018-09-21 Martin Liska <mliska@suse.cz>
* auto-profile.c (autofdo_source_profile::read): Do not
set sum_all.
(read_profile): Do not add working sets.
(read_autofdo_file): Remove sum_all.
(afdo_callsite_hot_enough_for_early_inline): Remove const
qualifier.
* coverage.c (struct counts_entry): Remove gcov_summary.
(read_counts_file): Read new GCOV_TAG_OBJECT_SUMMARY,
do not support GCOV_TAG_PROGRAM_SUMMARY.
(get_coverage_counts): Remove summary and expected
arguments.
* coverage.h (get_coverage_counts): Likewise.
* doc/gcov-dump.texi: Remove -w option.
* gcov-dump.c (dump_working_sets): Remove.
(main): Do not support '-w' option.
(print_usage): Likewise.
(tag_summary): Likewise.
* gcov-io.c (gcov_write_summary): Do not dump
histogram.
(gcov_read_summary): Likewise.
(gcov_histo_index): Remove.
(gcov_histogram_merge): Likewise.
(compute_working_sets): Likewise.
* gcov-io.h (GCOV_TAG_OBJECT_SUMMARY): Mark
it not obsolete.
(GCOV_TAG_PROGRAM_SUMMARY): Mark it obsolete.
(GCOV_TAG_SUMMARY_LENGTH): Adjust.
(GCOV_HISTOGRAM_SIZE): Remove.
(GCOV_HISTOGRAM_BITVECTOR_SIZE): Likewise.
(struct gcov_summary): Simplify rapidly just
to runs and sum_max fields.
(gcov_histo_index): Remove.
(NUM_GCOV_WORKING_SETS): Likewise.
(compute_working_sets): Likewise.
* gcov-tool.c (print_overlap_usage_message): Remove
trailing empty line.
* gcov.c (read_count_file): Read GCOV_TAG_OBJECT_SUMMARY.
(output_lines): Remove program related line.
* ipa-profile.c (ipa_profile): Do not consider GCOV histogram.
* lto-cgraph.c (output_profile_summary): Do not stream GCOV
histogram.
(input_profile_summary): Do not read it.
(merge_profile_summaries): And do not merge it.
(input_symtab): Do not call removed function.
* modulo-sched.c (sms_schedule): Do not print sum_max.
* params.def (HOT_BB_COUNT_FRACTION): Reincarnate param that was
removed when histogram method was invented.
(HOT_BB_COUNT_WS_PERMILLE): Mention that it's used only in LTO
mode.
* postreload-gcse.c (eliminate_partially_redundant_load): Fix
GCOV coding style.
* predict.c (get_hot_bb_threshold): Use HOT_BB_COUNT_FRACTION
and dump selected value.
* profile.c (add_working_set): Remove.
(get_working_sets): Likewise.
(find_working_set): Likewise.
(get_exec_counts): Do not work with working sets.
(read_profile_edge_counts): Do not inform as sum_max is removed.
(compute_branch_probabilities): Likewise.
(compute_value_histograms): Remove argument for call of
get_coverage_counts.
* profile.h: Do not make gcov_summary const.
2018-09-21 Martin Liska <mliska@suse.cz>
* libgcov-driver.c (crc32_unsigned): Remove.
(gcov_histogram_insert): Likewise.
(gcov_compute_histogram): Likewise.
(compute_summary): Simplify rapidly.
(merge_one_data): Do not handle PROGRAM_SUMMARY tag.
(merge_summary): Rapidly simplify.
(dump_one_gcov): Ignore gcov_summary.
(gcov_do_dump): Do not handle program summary, it's not
used.
* libgcov-util.c (tag_summary): Remove.
(read_gcda_finalize): Fix coding style.
(read_gcda_file): Initialize curr_object_summary.
(compute_summary): Remove.
(calculate_overlap): Remove settings of run_max.
From-SVN: r264462
The AArch32 instruction sets prior to Armv7 do not define the ISB and
DSB instructions that are needed to form a speculation barrier. While
I do not know of any instances of cores based on those instruction
sets being vulnerable to speculative side channel attacks it is
possible to run code built for those ISAs on more recent hardware
where they would become vulnerable.
This patch works around this by using a library call added to libgcc.
That code can then take any platform-specific actions necessary to
ensure safety.
For the moment I've only handled two cases: the library code being
built for armv7 or later anyway and running on Linux.
On Linux we can handle this by calling the kernel function that will
flush a small amount of cache. Such a sequence ends with a ISB+DSB
sequence if running on an Armv7 or later CPU.
gcc:
PR target/86951
* config/arm/arm-protos.h (arm_emit_speculation_barrier): New
prototype.
* config/arm/arm.c (speculation_barrier_libfunc): New static
variable.
(arm_init_libfuncs): Initialize it.
(arm_emit_speculation_barrier): New function.
* config/arm/arm.md (speculation_barrier): Call
arm_emit_speculation_barrier for architectures that do not have
DSB or ISB.
(speculation_barrier_insn): Only match on Armv7 or later.
libgcc:
PR target/86951
* config/arm/lib1funcs.asm (speculation_barrier): New function.
* config/arm/t-arm (LIB1ASMFUNCS): Add it to list of functions
to build.
From-SVN: r263806
In order to allow ZCX on VxWorks, we need the frame_dummy function to do
the register_frame_info(). So make sure crtbegin.o and crtend.o are
available for use with a custom spec file.
From-SVN: r263690
2018-08-01 Martin Liska <mliska@suse.cz>
* libgcov-profiler.c (__gcov_indirect_call_profiler_v2): Do not
check that __gcov_indirect_call_callee is non-null.
From-SVN: r263202
CET kernel has been changed to place a restore token on shadow stack for
signal handler to enhance security. It is usually transparent to user
programs since kernel will pop the restore token when signal handler
returns. But when an exception is thrown from a signal handler, now
we need to remove _Unwind_Frames_Increment to pop the the restore token
from shadow stack. Otherwise, we get
FAIL: g++.dg/torture/pr85334.C -O0 execution test
FAIL: g++.dg/torture/pr85334.C -O1 execution test
FAIL: g++.dg/torture/pr85334.C -O2 execution test
FAIL: g++.dg/torture/pr85334.C -O3 -g execution test
FAIL: g++.dg/torture/pr85334.C -Os execution test
FAIL: g++.dg/torture/pr85334.C -O2 -flto -fno-use-linker-plugin -flto-partition=none execution test
PR libgcc/85334
* config/i386/shadow-stack-unwind.h (_Unwind_Frames_Increment):
Removed.
From-SVN: r263030
For some targets (in my case VxWorks 5.5), libgcov does not compile due
to missing functions and macros such as getpid() and F_OK.
Incidentally, gcc/Makefile.in already contains comments such as
# Install gcov if it was compiled.
but there is no logic in place to actually allow gcov to not be
compiled.
So add an option for disabling build and install of libgcov and the
related host tools.
From-SVN: r262180
