The recent changes to error on mixing -march=i386 and -fcf-protection broke
bootstrap. This patch changes lib{atomic,gomp,itm} configury, so that it
only adds -march=i486 to flags if really needed (i.e. when 486 or later isn't
on by default already). Similarly, it will not use ifuncs if -mcx16
(or -march=i686 for 32-bit) is on by default.
2021-01-15 Jakub Jelinek <jakub@redhat.com>
PR target/70454
libatomic/
* configure.tgt: For i?86 and x86_64 determine if -march=i486 needs to
be added through preprocessor check on
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4. Determine if try_ifunc is needed
based on preprocessor check on __GCC_HAVE_SYNC_COMPARE_AND_SWAP_16
or __GCC_HAVE_SYNC_COMPARE_AND_SWAP_8.
libgomp/
* configure.tgt: For i?86 and x86_64 determine if -march=i486 needs to
be added through preprocessor check on
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4.
libitm/
* configure.tgt: For i?86 and x86_64 determine if -march=i486 needs to
be added through preprocessor check on
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4.
Add nvptx support to libatomic.
Given that atomic_test_and_set is not implemented for nvptx (PR96964), the
compiler translates __atomic_test_and_set falling back onto the "Failing all
else, assume a single threaded environment and simply perform the operation"
case in expand_atomic_test_and_set, so it doesn't map onto an actual atomic
operation.
Still, that counts as supported for the configure test of libatomic, so we
end up with HAVE_ATOMIC_TAS_1/2/4/8/16 == 1, and the corresponding
__atomic_test_and_set_1/2/4/8/16 in libatomic all using that non-atomic
implementation.
Fix this by adding an atomic_test_and_set expansion for nvptx, that uses
libatomics __atomic_test_and_set_1.
This again makes the configure tests for HAVE_ATOMIC_TAS_1/2/4/8/16 fail, so
instead we use this case in tas_n.c:
...
/* If this type is smaller than word-sized, fall back to a word-sized
compare-and-swap loop. */
bool
SIZE(libat_test_and_set) (UTYPE *mptr, int smodel)
...
which for __atomic_test_and_set_8 uses INVERT_MASK_8.
Add INVERT_MASK_8 in libatomic_i.h, as well as MASK_8.
Tested libatomic testsuite on nvptx.
gcc/ChangeLog:
PR target/96964
* config/nvptx/nvptx.md (define_expand "atomic_test_and_set"): New
expansion.
libatomic/ChangeLog:
PR target/96898
* configure.tgt: Add nvptx.
* libatomic_i.h (MASK_8, INVERT_MASK_8): New macro definition.
* config/nvptx/host-config.h: New file.
* config/nvptx/lock.c: New file.
This patch adds the ability to configure GCC on AIX to build as a
64 bit application and to build target libraries "FAT" libraries in both
32 bit and 64 bit mode.
The patch adds makefile fragment hooks to target libraries that allows
them to include target-specific rules. The target specific rules for
AIX place both 32 bit and 64 bit objects and shared objects
in archives at the top-level, not multilib subdirectories. The
multilibs are built in subdirectories, but must be combined during the
last parts of the target library build process. Because of the way
that GCC bootstrap works, the libraries must be combined during the
multiple stages of GCC bootstrap, not solely when installed in the
final destination, so the libraries are correct at the end of
each target library build stage, not solely an install recipe.
gcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.gcc: Use t-aix64, biarch64 and default64 for cpu_is_64bit.
* config/rs6000/aix72.h (ASM_SPEC): Remove aix64 option.
(ASM_SPEC32): New.
(ASM_SPEC64): New.
(ASM_CPU_SPEC): Remove vsx and altivec options.
(CPP_SPEC_COMMON): Rename from CPP_SPEC.
(CPP_SPEC32): New.
(CPP_SPEC64): New.
(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
(TARGET_DEFAULT): Only define if not BIARCH.
(LIB_SPEC_COMMON): Rename from LIB_SPEC.
(LIB_SPEC32): New.
(LIB_SPEC64): New.
(LINK_SPEC_COMMON): Rename from LINK_SPEC.
(LINK_SPEC32): New.
(LINK_SPEC64): New.
(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
(CPP_SPEC): Same.
(CPLUSPLUS_CPP_SPEC): Same.
(LIB_SPEC): Same.
(LINK_SPEC): Same.
(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
* config/rs6000/defaultaix64.h: New file.
* config/rs6000/t-aix64: New file.
libgcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.host (extra_parts): Add crtcxa_64 and crtdbase_64.
* config/rs6000/t-aix-cxa: Explicitly compile 32 bit with -maix32
and 64 bit with -maix64.
* config/rs6000/t-slibgcc-aix: Remove extra @multilib_dir@ level.
Build and install AIX-style FAT libraries.
libgomp/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libstdc++-v3/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host (aix*): Define tmake_file.
* config/os/aix/t-aix: New file.
libatomic/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libgfortran/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host: Add system configury stanza. Define tmake_file.
* config/t-aix: New file.
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
This is a roll-up of a set of changes needed to support the Arm EABI on NetBSD.
2019-06-14 Matt Thomas <matt@3am-software.com>
Matthew Green <mrg@eterna.com.au>
Nick Hudson <skrll@netbsd.org>
Maya Rashish <coypu@sdf.org>
Richard Earnshaw <rearnsha@arm.com>
gcc:
* config.gcc (arm*-*-netbsdelf*) Add support for EABI configuration.
* config.host (arm*-*-netbsd*): Use driver-arm.o on native NetBSD.
* config/arm/netbsd-eabi.h: New file.
* config/arm/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Undefine before
redefining.
(SUBTARGET_EXTRA_ASM_SPEC): Don't pass -matpcs to the assembler.
* config/netbsd-elf.h (NETBSD_LINK_LD_ELF_SO_SPEC): New define.
(NETBSD_SUBTARGET_EXTRA_SPECS): New define.
(SUBTARGET_EXTRA_SPECS): Define to NETBSD_SUBTARGET_EXTRA_SPECS.
libatomic:
* configure.tgt (arm*): Handle NetBSD in the same way as FreeBSD.
libgcc:
* config.host (arm*-*-netbsdelf*): Add support for EABI configurations.
* config/arm/t-netbsd (LIB1ASMFUNCS): Add some additional assembler
functions to build.
* config/arm/t-netbsd-eabi: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <skrll@netbsd.org>
Co-Authored-By: Richard Earnshaw <rearnsha@arm.com>
From-SVN: r272290
The compiler builtin will use the hardware instruction cdsg if the
memory operand is properly aligned and will fall back to the
library call otherwise.
In case the compiler for one part is able to detect that the
location is aligned and fails to do so for another usage of the hw
instruction and the sw fall back would be mixed on the same memory
location. To avoid this the library fall back also has to use the
hardware instruction if possible.
libatomic/ChangeLog:
2018-03-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/s390/exch_n.c: New file.
* configure.tgt: Add the config directory for s390.
From-SVN: r258384
Need to properly check if -march=i486 is really needed for -m32 build
of libatomic on Linux/x86 and Linux/x86-64.
PR target/70454
* configure.tgt (XCFLAGS): Revert the last change.
From-SVN: r235411
Gcc uses the same -march= for both -m32 and -m64 on x86-64 unless
--with-arch-32= is used. There is no need for -march=i486 to compile
32-bit libatomic on x86-64.
PR target/70454
* configure.tgt (XCFLAGS): Don't add -march=i486 to compile
32-bit x86 target library on x86-64.
From-SVN: r235287
Jakub Jelinek
Tom de Vries
David Edelsohn
Jakub Jelinek
Christophe Lyon
Matt Thomas
Andreas Krebbel
Steve Ellcey
Palmer Dabbelt
Sebastian Huber
H.J. Lu
John Marino
Andreas Tobler
Kai Tietz
Uros Bizjak
Kai Tietz
Richard Sandiford
Michael Hudson-Doyle
Matthias Klose
Sofiane Naci
Richard Henderson