Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
libgcc/
2016-12-12 George Spelvin <linux@sciencehorizons.net>
* config/avr/lib1funcs.S (__ashldi3): Use __tmp_reg__ to restore
R16 instead of push + pop.
(__ashrdi3, __lshrdi3): Same. And use __zero_reg__ for signs.
From-SVN: r243545
gcc/
2016-12-05 Cupertino Miranda <cmiranda@synopsys.com>
* config/arc/arc.h (STARTFILE_SPEC): Use default linux specs.
(ENDFILE_SPEC): Likewise.
libgcc/
2016-12-05 Cupertino Miranda <cmiranda@synopsys.com>
* config.host (arc*-*-linux-uclibc*): Use default extra
objects. Include linux-android header.
* config/arc/crti.S (_init): Declare symbol as function.
(_fini): Likewise.
From-SVN: r243245
PR gcc/74748
* libgcc/config/bfin/libgcc-glibc.ver, libgcc/config/bfin/t-linux:
use generic linker version information on Blackfin.
2016-11-27 Iain Sandoe <iain@codesourcery.com>
From-SVN: r242934
A/ Newer versions of ld64 check the min_version command, and newer versions of
the system assembler inserts this in response to "-mmacosx-version-min=" on
the assembler line. Unless one makes sensible versions, some object is bound
to conflict.
B/ Additionally, there's a difference in behaviour between "as" and "ld" when
presented with xx.yy.zz (ld truncates to xx.yy, as doesn't); net result is
that one needs to pass a truncated version to "as".
So (if the assembler supports minversion commands)
(a) provide a truncated minversion (as asm_macosx_version_min, which is a
driver-only var).
(b) pass this to "as"
(c) Update tests to determine 'HAVE_AS_MMACOSX_VERSION_MIN_OPTION'
(Rainer's patch)
(d) For some reason the testcases are "run" (it's not obvious they need to be,
they are checking compile-time issues)
- anyway, to preserve the status quo, I've left them as exec. However, the
minimum version that can be code-gened for is target-dependent (there are no
released x86 versions before 10.4, for example). To avoid conflicts where
the "as" is assuming some minimum, I've set the testversion to 10.5 (which
is supported by all the archs we have)
(e) We need to ensure that libgcc and crts are generated with a sufficiently
old minversion not to conflict.
gcc/
2016-11-27 Iain Sandoe <iain@codesourcery.com>
Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR target/67710
* config.in: Regenerate
* config/darwin-driver.c (darwin_driver_init): Emit a version string
for the assembler.
* config/darwin.h(ASM_MMACOSX_VERSION_MIN_SPEC): New, new tests.
* config/darwin.opt(asm_macosx_version_min): New.
* config/i386/darwin.h: Handle ASM_MMACOSX_VERSION_MIN_SPEC.
* configure: Regenerate
* configure.ac: Check for mmacosx-version-min handling.
gcc/testsuite/
2016-11-27 Iain Sandoe <iain@codesourcery.com>
Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
Dominique d'Humieres <dominiq@lps.ens.fr>
PR target/67710
* gcc.dg/darwin-minversion-1.c: Update min version check.
* gcc.dg/darwin-minversion-2.c: Likewise.
* gcc.dg/darwin-minversion-3.c: Likewise.
libgcc/
2016-11-27 Iain Sandoe <iain@codesourcery.com>
Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR target/67710
* config/t-darwin: Default builds to 10.5 codegen.
Co-Authored-By: Dominique d'Humieres <dominiq@lps.ens.fr>
Co-Authored-By: Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
From-SVN: r242898
libgcc/
* config/arm/fp16.c (struct format): New.
(binary32): New.
(__gnu_float2h_internal): New. Body moved from
__gnu_f2h_internal and generalize.
(_gnu_f2h_internal): Move body to function __gnu_float2h_internal.
Call it with binary32.
Co-Authored-By: Matthew Wahab <matthew.wahab@arm.com>
From-SVN: r242781
The __cpu_indicator_init and __cpu_model symbols are not safe to use
from shared libgcc_s.so from ifunc resolvers, so since gcc-6, only
the definitions from static libgcc.a are used, however the symbols
are kept in libgcc_s as well for backward compatibility (with
appropriate symbol version). On targets without such backward
compatibility concern add cpuinfo to the static library only (this
avoids running the ctor, reduces libgcc_s size and elf abi concerns
about the versioned symbols).
libgcc/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config.host (i[3456]86-*-musl*, x86_64-*-musl*): Use
i386/t-cpuinfo-static instead of i386/t-cpuinfo.
* config/i386/t-cpuinfo-static: New.
From-SVN: r242268
Define LIB2ADDEH_XTENSA_UNWIND_DW2_FDE to unwind-dw2-fde.c in
xtensa/t-elf and to unwind-dw2-fde-dip.c in xtensa/t-linux and use
LIB2ADDEH_XTENSA_UNWIND_DW2_FDE in LIB2ADDEH definition.
This fixes build for elf target with windowed xtensa core that currently
breaks with the following error message:
unwind-dw2-fde-dip.c:36:40: fatal error: elf.h: No such file or directory
2016-10-18 Max Filippov <jcmvbkbc@gmail.com>
libgcc/
* config/xtensa/t-elf (LIB2ADDEH_XTENSA_UNWIND_DW2_FDE): New
definition.
* config/xtensa/t-linux (LIB2ADDEH_XTENSA_UNWIND_DW2_FDE): New
definition.
* config/xtensa/t-windowed (LIB2ADDEH): Use
LIB2ADDEH_XTENSA_UNWIND_DW2_FDE defined by either xtensa/t-elf
or xtensa/t-linux.
From-SVN: r241313
Use new FPU instruction sequences documented in the ISA book to
implement __divsf3, __divdf3, __recipsf2, __recipdf2, __rsqrtsf2,
__rsqrtdf2 and __ieee754_sqrtf and __ieee754_sqrt.
2016-10-18 Ding-Kai Chen <dkchen@cadence.com>
libgcc/
* config/xtensa/ieee754-df.S (__recipdf2, __rsqrtdf2,
__ieee754_sqrt): New functions.
(__divdf3): Add implementation with new FPU instructions under
#if XCHAL_HAVE_DFP_DIV.
* config/xtensa/ieee754-sf.S (__recipsf2, __rsqrtsf2,
__ieee754_sqrtf): New functions.
(__divsf3): Add implementation with new FPU instructions under
#if XCHAL_HAVE_FP_DIV.
* config/xtensa/t-xtensa (LIB1ASMFUNCS): Add _sqrtf, _recipsf2
_rsqrtsf2, _sqrt, _recipdf2 and _rsqrtdf2.
From-SVN: r241312
Bug 77586, and previously
<https://gcc.gnu.org/ml/gcc-bugs/2016-08/msg03233.html>, reports
ia64-elf failing to build because of float128_type_node being NULL,
but being used by the back end for __float128.
The global float128_type_node is only available conditionally, if
target hooks indicate TFmode is not only available as a scalar mode
and of the right format, but also supported in libgcc. The back-end
support, however, expects the type always to be available for
__float128 even if the libgcc support is missing.
Although a target-specific node could be restored in the case where
libgcc support is missing, it seems better to address the missing
libgcc support. Thus, this patch enables TFmode soft-fp in libgcc
globally for all ia64 targets. Support for XFmode in libgcc (that is,
for libgcc2.c XFmode functions, not soft-fp) is also enabled for all
ia64 targets so that ia64 no longer needs to define the
TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P hook.
I've confirmed that ia64-elf builds cc1 with this patch and it passes
-fself-test. I have not otherwise tested the patch. It's plausible
that ia64-elf and ia64-freebsd might work as-is, but ia64-vms probably
needs further changes, by someone familiar with VMS shared libraries,
to implement an equivalent of ia64/t-softfp-compat in that case
(avoiding conflicts between __divtf3 from soft-fp and the old alias
for __divxf3).
PR target/77586
gcc:
* config/ia64/ia64.c (ia64_libgcc_floating_mode_supported_p)
(TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): Remove.
* config/ia64/elf.h (IA64_NO_LIBGCC_TFMODE): Likewise.
* config/ia64/freebsd.h (IA64_NO_LIBGCC_TFMODE): Likewise.
* config/ia64/vms.h (IA64_NO_LIBGCC_XFMODE)
(IA64_NO_LIBGCC_TFMODE): Likewise.
libgcc:
* config.host (ia64*-*-elf*, ia64*-*-freebsd*, ia64-hp-*vms*): Use
soft-fp.
From-SVN: r240955
PR gcov-profile/7970
PR gcov-profile/16855
PR gcov-profile/44779
* g++.dg/gcov/pr16855.C: New test.
* coverage.c (build_gcov_exit_decl): New function.
(coverage_obj_init): Call the function and generate __gcov_exit
destructor.
* doc/gcov.texi: Document when __gcov_exit function is called.
* libgcov-driver.c (__gcov_init): Do not register a atexit
handler.
(__gcov_exit): Rename from gcov_exit.
* libgcov.h (__gcov_exit): Declare.
From-SVN: r240529
* configure.ac: Do not create links, only substitute the filenames.
* configure: Regenerate.
* Makefile.in: Assign the substitution results to variables.
(LIBGCC_LINKS): Define.
(enable-execute-stack.c): New rule.
(unwind.h): Likewise.
(md-unwind-support.h): Likewise.
(sfp-machine.h): Likewise.
(gthr-default.h): Likewise.
Add $(LIBGCC_LINKS) to the prerequisites of all object files and
unwind.h as prerequisite of install-unwind_h-forbuild.
From-SVN: r240312
PR libgcc/71744
* unwind-dw2-fde.c (ATOMIC_FDE_FAST_PATH): Define if __register_frame*
is not the primary registry and atomics are available.
(any_objects_registered): New variable.
(__register_frame_info_bases, __register_frame_info_table_bases):
Atomically store 1 to any_objects_registered after registering first
unwind info.
(_Unwind_Find_FDE): Return early if any_objects_registered is 0.
From-SVN: r240193
This patch arranges for half-precision complex multiply and divide
routines to be built if __LIBGCC_HAS_HF_MODE__. This will be true
if the target supports the _Float16 type.
libgcc/
PR target/63250
* Makefile.in (lib2funcs): Build _mulhc3 and _divhc3.
* libgcc2.h (LIBGCC_HAS_HF_MODE): Conditionally define.
(HFtype): Likewise.
(HCtype): Likewise.
(__divhc3): Likewise.
(__mulhc3): Likewise.
* libgcc2.c: Support _mulhc3 and _divhc3.
From-SVN: r240043
libgcc complex multiply is meant to eliminate excess
precision from certain internal values by forcing them to memory in
exactly those cases where the type has excess precision. But in
https://gcc.gnu.org/ml/gcc-patches/2014-09/msg01894.html I
accidentally inverted the logic so that values get forced to memory in
exactly the cases where it's not needed. (This is a pessimization in
the no-excess-precision case, in principle could lead to bad results
depending on code generation in the excess-precision case. Note: I do
not have a test demonstrating bad results.)
Bootstrapped with no regressions on x86_64-pc-linux-gnu. Code size
went down on x86_64 as expected; old sizes:
text data bss dec hex filename
887 0 0 887 377 _muldc3.o
810 0 0 810 32a _mulsc3.o
2032 0 0 2032 7f0 _multc3.o
983 0 0 983 3d7 _mulxc3.o
New sizes:
847 0 0 847 34f _muldc3.o
770 0 0 770 302 _mulsc3.o
2032 0 0 2032 7f0 _multc3.o
951 0 0 951 3b7 _mulxc3.o
PR libgcc/77519
* libgcc2.c (NOTRUNC): Invert settings.
From-SVN: r240033
In <https://gcc.gnu.org/ml/gcc-bugs/2016-08/msg03233.html>, Nick
reported i386-elf and ia64-elf failing to build because of
float128_type_node being NULL, but being used by the back end for
__float128.
The global float128_type_node is only available conditionally, if
target hooks indicate TFmode is not only available as a scalar mode
and of the right format, but also supported in libgcc. The back-end
support, however, expects the type always to be available for
__float128 even if the libgcc support is missing.
Although a target-specific node could be restored in the case where
libgcc support is missing, it seems better to address the missing
libgcc support. Thus, this patch enables TFmode soft-fp in libgcc
globally for all x86 targets - the only special cases needed being for
targets that use soft-fp for SFmode and DFmode, one of which already
had the support for TFmode as well (so I based the i[34567]86-*-rtems*
configuration on that present for i[34567]86-*-elfiamcu). The i386
implementation of TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P is then
removed as no longer needed.
I can provide such a patch for ia64 if useful, but am not in a
position to test it (and while I'm reasonably confident that enabling
this support would be right for ia64-elf and ia64-freebsd, I've no
real idea if enabling libgcc support for TFmode, with or without also
enabling it for XFmode, would be safe for ia64-vms).
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
gcc:
* config/i386/i386.c (ix86_libgcc_floating_mode_supported_p)
(TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): Remove.
* config/i386/i386elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Likewise.
* config/i386/lynx.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Likewise.
* config/i386/netbsd-elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE):
Likewise.
* config/i386/netbsd64.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Likewise.
* config/i386/nto.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Likewise.
* config/i386/openbsd.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Likewise.
* config/i386/rtemself.h (IX86_NO_LIBGCC_TFMODE): Likewise.
* config/i386/vxworks.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Likewise.
libgcc:
* config.host (i[34567]86-*-* | x86_64-*-*): Enable TFmode soft-fp
where not already enabled.
From-SVN: r239775
Alan Modra
Jakub Jelinek
Krister Walfridsson
Matthias Klose
Claudiu Zissulescu
George Spelvin
Cupertino Miranda
Thomas Koenig
Andre Vieira
Thomas Petazzoni
Iain Sandoe
James Greenhalgh
Marc Glisse
Walter Lee
H.J. Lu
Alexander Monakov
Waldemar Brodkorb
Szabolcs Nagy
Martin Liska
Bernd Edlinger
Uros Bizjak
Florian Weimer
John David Anglin
Max Filippov
Ding-Kai Chen
Thomas Preud'homme
Joseph Myers
Andreas Tobler
Andreas Schwab
Jakub Jelinek
Uros Bizjak
Eric Botcazou