2016-03-22 Michael Meissner <meissner@linux.vnet.ibm.com>
PR libgcc/70363
* config/rs6000/extendkftf2-sw.c (__extendkftf2_sw): If libgcc was
built with an assembler that does not support ISA 3.0
instructions, rename __extendkftf2_sw to __extendkftf2.
From-SVN: r234408
2016-02-26 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/sfp-machine.h (_FP_DECL_EX): Declare _fpsr as a
union of u64 and double.
(FP_TRAPPING_EXCEPTIONS): Return a bitmask of trapping exceptions.
(FP_INIT_ROUNDMODE): Read the fpscr instead of writing a mystery
value.
(FP_ROUNDMODE): Update the usage of _fpscr.
Co-Authored-By: Bill Schmidt <wschmidt@linux.vnet.ibm.com>
From-SVN: r233756
2016-02-03 Andreas Tobler <andreast@gcc.gnu.org>
PR bootstrap/69611
* config/rs6000/sfp-machine.h: Guard __sfp_exceptions with
__FLOAT128__ to compile only for __float128 capable targets.
From-SVN: r233111
2016-01-21 Michael Meissner <meissner@linux.vnet.ibm.com>
Steven Munroe <munroesj@linux.vnet.ibm.com>
Tulio Magno Quites Machado Filho <tulioqm@br.ibm.com>
* config/rs6000/float128-sed: New files to convert TF names to KF
names for PowerPC IEEE 128-bit floating point support.
* config/rs6000/float128-sed-hw: Likewise.
* config/rs6000/float128-hw.c: New file for ISA 3.0 IEEE 128-bit
floating point hardware support.
* config/rs6000/float128-ifunc.c: New file to pick either IEEE
128-bit floating point software emulation or use ISA 3.0 hardware
support if it is available.
* config/rs6000/quad-float128.h: New file to support IEEE 128-bit
floating point.
* config/rs6000/extendkftf2-sw.c: New file, convert IEEE 128-bit
floating point to IBM extended double.
* config/rs6000/trunctfkf2-sw.c: New file, convert IBM extended
double to IEEE 128-bit floating point.
* config/rs6000/t-float128: New Makefile fragments to enable
building __float128 emulation support.
* config/rs6000/t-float128-hw: Likewise.
* config/rs6000/sfp-exceptions.c: New file to provide exception
support for IEEE 128-bit floating point.
* config/rs6000/floattikf.c: New files for converting between IEEE
128-bit floating point and signed/unsigned 128-bit integers.
* config/rs6000/fixunskfti.c: Likewise.
* config/rs6000/fixkfti.c: Likewise.
* config/rs6000/floatuntikf.c: Likewise.
* config/rs6000/sfp-machine.h (_FP_W_TYPE_SIZE): Use 64-bit types
when building on 64-bit systems, or when VSX is enabled.
(_FP_W_TYPE): Likewise.
(_FP_WS_TYPE): Likewise.
(_FP_I_TYPE): Likewise.
(TItype): Define on 64-bit systems.
(UTItype): Likewise.
(TI_BITS): Likewise.
(_FP_MUL_MEAT_D): Add support for using 64-bit types.
(_FP_MUL_MEAT_Q): Likewise.
(_FP_DIV_MEAT_D): Likewise.
(_FP_DIV_MEAT_Q): Likewise.
(_FP_NANFRAC_D): Likewise.
(_FP_NANFRAC_Q): Likewise.
(ISA_BIT): Add exception support if we are being compiled on a
machine with hardware floating point support to build the IEEE
128-bit emulation functions.
(FP_EX_INVALID): Likewise.
(FP_EX_OVERFLOW): Likewise.
(FP_EX_UNDERFLOW): Likewise.
(FP_EX_DIVZERO): Likewise.
(FP_EX_INEXACT): Likewise.
(FP_EX_ALL): Likewise.
(__sfp_handle_exceptions): Likewise.
(FP_HANDLE_EXCEPTIONS): Likewise.
(FP_RND_NEAREST): Likewise.
(FP_RND_ZERO): Likewise.
(FP_RND_PINF): Likewise.
(FP_RND_MINF): Likewise.
(FP_RND_MASK): Likewise.
(_FP_DECL_EX): Likewise.
(FP_INIT_ROUNDMODE): Likewise.
(FP_ROUNDMODE): Likewise.
* libgcc/config.host (powerpc*-*-linux*): If compiler can compile
VSX code, enable IEEE 128-bit floating point. If the compiler can
compile IEEE 128-bit floating point code with ISA 3.0 IEEE 128-bit
floating point hardware instructions and it supports declaring
functions with the ifunc attribute, enable ifunc functions to
switch between software and hardware support.
* configure.ac (powerpc*-*-linux*): Likewise.
* configure: Regenerate.
Co-Authored-By: Steven Munroe <munroesj@linux.vnet.ibm.com>
Co-Authored-By: Tulio Magno Quites Machado Filho <tulioqm@br.ibm.com>
From-SVN: r232685
[gcc]
2016-01-13 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000-builtin.def (BU_FLOAT128_2): Add support
for pack/unpack functions for __ibm128.
(PACK_IF): Likewise.
(UNPACK_IF): Likewise.
* config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Add
support for __ibm128 pack/unpack functions.
(rs6000_invalid_builtin): Likewise.
(rs6000_init_builtins): Likewise.
(rs6000_opt_masks): Likewise.
* config/rs6000/rs6000.h (MASK_FLOAT128): Add short name.
(RS6000_BTM_FLOAT128): Add support for __ibm128 pack/unpack
functions
(RS6000_BTM_COMMON): Likewise.
* config/rs6000/rs6000.md (f128_vsx): New mode attribute.
(unpack<mode>): Use FMOVE128_FPR iterator instead of FMOVE128, to
disallow __builtin_{pack,unpack}_longdouble if long double is IEEE
128-bit floating point. Add support for the double values to be
in Altivec registers for TF/IF packing and unpacking, but restrict
TD packing sub-fields to be FPR registers. Don't allow overlapped
register support for packing. Allow pack inputs to be memory
locations. Don't build generator functions for unpack<mode>_dm
and unpack<mode>_nodm.
(unpack<mode>_dm): Likewise.
(unpack<mode>_nodm): Likewise.
(pack<mode>): Likewise.
* config/rs6000/rs6000-builtin.def (__builtin_pack_ibm128): Add
built-in functions to pack/unpack explicit __ibm128 values.
(__builtin_unpack_ibm128): Likewise.
* doc/extend.texi (PowerPC Built-in Functions): Document
__builtin_pack_ibm128 and __builtin_unpack_ibm128.
[libgcc]
2016-01-13 Michael Meissner <meissner@linux.vnet.ibm.com>
Steven Munroe <munroesj@linux.vnet.ibm.com>
Tulio Magno Quites Machado Filho <tulioqm@br.ibm.com>
* config/rs6000/sfp-exceptions.c: New file to provide exception
support for IEEE 128-bit floating point.
* config/rs6000/float128-hw.c: New file for ISA 3.0 IEEE 128-bit
floating point hardware support.
* config/rs6000/floattikf.c: New files for IEEE 128-bit floating
point conversions.
* config/rs6000/fixunskfti.c: Likewise.
* config/rs6000/fixkfti.c: Likewise.
* config/rs6000/floatuntikf.c: Likewise.
* config/rs6000/extendkftf2-sw.c: Likewise.
* config/rs6000/trunctfkf2-sw.c: Likewise.
* config/rs6000/float128-ifunc.c: New file to pick either IEEE
128-bit floating point software emulation or use ISA 3.0 hardware
support if it is available.
* config/rs6000/quad-float128.h: New file to support IEEE 128-bit
floating point.
* config/rs6000/t-float128: New Makefile fragments to enable
building __float128 emulation support.
* config/rs6000/t-float128-hw: Likewise.
* config/rs6000/float128-sed: New file to convert TF names to KF
names for PowerPC IEEE 128-bit floating point support.
* config/rs6000/sfp-machine.h (_FP_W_TYPE_SIZE): Use 64-bit types
when building on 64-bit systems, or when VSX is enabled.
(_FP_W_TYPE): Likewise.
(_FP_WS_TYPE): Likewise.
(_FP_I_TYPE): Likewise.
(TItype): Define on 64-bit systems.
(UTItype): Likewise.
(TI_BITS): Likewise.
(_FP_MUL_MEAT_D): Add support for using 64-bit types.
(_FP_MUL_MEAT_Q): Likewise.
(_FP_DIV_MEAT_D): Likewise.
(_FP_DIV_MEAT_Q): Likewise.
(_FP_NANFRAC_D): Likewise.
(_FP_NANFRAC_Q): Likewise.
(ISA_BIT): Add exception support if we are being compiled on a
machine with hardware floating point support to build the IEEE
128-bit emulation functions.
(FP_EX_INVALID): Likewise.
(FP_EX_OVERFLOW): Likewise.
(FP_EX_UNDERFLOW): Likewise.
(FP_EX_DIVZERO): Likewise.
(FP_EX_INEXACT): Likewise.
(FP_EX_ALL): Likewise.
(__sfp_handle_exceptions): Likewise.
(FP_HANDLE_EXCEPTIONS): Likewise.
(FP_RND_NEAREST): Likewise.
(FP_RND_ZERO): Likewise.
(FP_RND_PINF): Likewise.
(FP_RND_MINF): Likewise.
(FP_RND_MASK): Likewise.
(_FP_DECL_EX): Likewise.
(FP_INIT_ROUNDMODE): Likewise.
(FP_ROUNDMODE): Likewise.
* configure.ac (powerpc*-*-linux*): Check whether the PowerPC
compiler can do __float128.
* configure: Regenerate.
* libgcc/config.host (powerpc*-*-linux*): If compiler can compile
VSX code, enable IEEE 128-bit floating point.
From-SVN: r232346
Continuing the cleanups of libgcc soft-fp configuration for
powerpc*-*-linux* in preparation for implementing
TARGET_ATOMIC_ASSIGN_EXPAND_FENV for soft-float and e500, this patch
optimizes the choice of which functions to build for the e500 cases.
For e500v2, use of hardfp is generally right, except that calls to
__unordsf2 and __unorddf2 are actually generated by GCC from
__builtin_isunordered and so they need to be implemented with soft-fp
to avoid recursively calling themselves. For e500v1, hardfp is right
for SFmode (except for __unordsf2) but soft-fp for DFmode (and when
using soft-fp, as usual it's best for the conversions between DFmode
and integers all to come directly from soft-fp rather than some coming
from libgcc2.c). Thus, new variables hardfp_exclusions and
softfp_extras are added that configurations using t-hardfp and
t-softfp can use to achieve the desired effect of selectively mixing
the two sources of functions.
Tested with no regressions for crosses to powerpc-linux-gnuspe (both
e500v1 and e500v2); also checked that the same set of symbols and
versions is exported from shared libgcc before and after the patch.
* config/t-hardfp (hardfp_exclusions): Document new variable for
user to define.
(hardfp_func_list): Exclude functions from $(hardfp_exclusions).
* config/t-softfp (softfp_extras): Document new variable for user
to define.
(softfp_func_list): Add functions from $(softfp_extras).
* config/rs6000/t-e500v1-fp, config/rs6000/t-e500v2-fp: New files.
* config.host (powerpc*-*-linux*): For e500v1, use
rs6000/t-e500v1-fp and t-hardfp; do not use t-softfp-sfdf and
t-softfp-excl. For e500v2, use t-hardfp-sfdf, rs6000/t-e500v2-fp
and t-hardfp; do not use t-softfp-sfdf and t-softfp-excl.
From-SVN: r216835
When I added support for using soft-fp in libgcc
<https://gcc.gnu.org/ml/gcc-patches/2006-03/msg00689.html>, libgcc
configuration was still done in the gcc/ directory, meaning that the
variables set in makefile fragments could not depend on the multilib
being built. Thus, building the soft-fp code for powerpc64-linux-gnu
was disabled in the same way as had been done with fp-bit: the code
was built, but with #ifndef __powerpc64__ wrappers around it so that
the resulting objects were empty.
Now that libgcc configuration is done in the toplevel libgcc
directory, such uses of softfp_wrap_start / softfp_wrap_end are better
replaced by configure-time conditionals that determine whether to use
soft-fp for a given multilib. This patch does so for
powerpc*-*-linux*. The same would appear to apply to
powerpc*-*-freebsd* (using rs6000/t-freebsd64), but I have not made
any changes there. t-ppc64-fp is also used by AIX targets, but they
don't use soft-fp anyway so the changes are of no consequence to them.
The same principle of replacing softfp_wrap_start / softfp_wrap_end
with configure-time conditionals also applies to
softfp_exclude_libgcc2, which was intended for cases where soft-fp is
being used on hard-float multilibs and so it is desirable on those
multilibs for a few functions to come from libgcc2.c rather than
soft-fp (but the soft-fp versions would be more efficient on
soft-float multilibs). Now we have hardfp.c and t-hardfp, those are
better to use in that case, to minimize the size of the bulk of the
functions that are only present for ABI compatibility and should never
be called by newly compiled code.
I intend followup patches to switch 32-bit hard-float multilibs to use
t-hardfp as far as possible (for all non-libgcc2.c operations for
classic hard float; for all except __unord* for e500v2; for all SFmode
operations except __unordsf2 for e500v1). After that will come making
the soft-fp operations, in the remaining cases for which they are
built because they are actually needed for code compiled by current
GCC, into compat symbols when building for glibc 2.19 or later, so
that the glibc versions (with exception and rounding mode support) get
used instead (2.19 or later is needed for all the functions to be
exported from glibc as non-compat symbols). In turn, that is required
before implementing TARGET_ATOMIC_ASSIGN_EXPAND_FENV for soft-float
and e500, as that can only be properly effective when GCC-compiled
code is actually interoperating correctly with the exception and
rounding mode state used by <fenv.h> functions.
Tested with no regressions with cross to powerpc64-linux-gnu (in
addition, verified that stripped libgcc_s.so.1 is identical before and
after the patch).
* config.host (powerpc*-*-linux*): Only use soft-fp for 32-bit
configurations.
* config/rs6000/t-ppc64-fp (softfp_wrap_start, softfp_wrap_end):
Remove variables.
From-SVN: r216564
gcc/c-family:
* c-cppbuiltin.c (c_cpp_builtins): Also define
__LIBGCC_EH_TABLES_CAN_BE_READ_ONLY__,
__LIBGCC_EH_FRAME_SECTION_NAME__, __LIBGCC_JCR_SECTION_NAME__,
__LIBGCC_CTORS_SECTION_ASM_OP__, __LIBGCC_DTORS_SECTION_ASM_OP__,
__LIBGCC_TEXT_SECTION_ASM_OP__, __LIBGCC_INIT_SECTION_ASM_OP__,
__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__,
__LIBGCC_STACK_GROWS_DOWNWARD__,
__LIBGCC_DONT_USE_BUILTIN_SETJMP__,
__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__,
__LIBGCC_DWARF_FRAME_REGISTERS__,
__LIBGCC_EH_RETURN_STACKADJ_RTX__, __LIBGCC_JMP_BUF_SIZE__,
__LIBGCC_STACK_POINTER_REGNUM__ and
__LIBGCC_VTABLE_USES_DESCRIPTORS__ for -fbuilding-libgcc.
(builtin_define_with_value): Handle backslash-escaping in string
macro values.
libgcc:
* Makefile.in (CRTSTUFF_CFLAGS): Add -fbuilding-libgcc.
* config/aarch64/linux-unwind.h (STACK_POINTER_REGNUM): Change all
uses to __LIBGCC_STACK_POINTER_REGNUM__.
(DWARF_ALT_FRAME_RETURN_COLUMN): Change all uses to
__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/alpha/vms-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN):
Change use to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/cr16/unwind-cr16.c (STACK_GROWS_DOWNWARD): Change all
uses to __LIBGCC_STACK_GROWS_DOWNWARD__.
(DWARF_FRAME_REGISTERS): Change all uses to
__LIBGCC_DWARF_FRAME_REGISTERS__.
(EH_RETURN_STACKADJ_RTX): Change all uses to
__LIBGCC_EH_RETURN_STACKADJ_RTX__.
* config/cr16/unwind-dw2.h (DWARF_FRAME_REGISTERS): Change use to
__LIBGCC_DWARF_FRAME_REGISTERS__. Remove conditional definition.
* config/i386/cygming-crtbegin.c (EH_FRAME_SECTION_NAME): Change
use to __LIBGCC_EH_FRAME_SECTION_NAME__.
(JCR_SECTION_NAME): Change use to __LIBGCC_JCR_SECTION_NAME__.
* config/i386/cygming-crtend.c (EH_FRAME_SECTION_NAME): Change use
to __LIBGCC_EH_FRAME_SECTION_NAME__.
(JCR_SECTION_NAME): Change use to __LIBGCC_JCR_SECTION_NAME__
* config/mips/linux-unwind.h (STACK_POINTER_REGNUM): Change use to
__LIBGCC_STACK_POINTER_REGNUM__.
(DWARF_ALT_FRAME_RETURN_COLUMN): Change all uses to
__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/nios2/linux-unwind.h (STACK_POINTER_REGNUM): Change use
to __LIBGCC_STACK_POINTER_REGNUM__.
* config/pa/hpux-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN): Change
all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/pa/linux-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN): Change
all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/rs6000/aix-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN):
Change all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
(STACK_POINTER_REGNUM): Change all uses to
__LIBGCC_STACK_POINTER_REGNUM__.
* config/rs6000/darwin-fallback.c (STACK_POINTER_REGNUM): Change
use to __LIBGCC_STACK_POINTER_REGNUM__.
* config/rs6000/linux-unwind.h (STACK_POINTER_REGNUM): Change all
uses to __LIBGCC_STACK_POINTER_REGNUM__.
* config/sparc/linux-unwind.h (DWARF_FRAME_REGISTERS): Change use
to __LIBGCC_DWARF_FRAME_REGISTERS__.
* config/sparc/sol2-unwind.h (DWARF_FRAME_REGISTERS): Change use
to __LIBGCC_DWARF_FRAME_REGISTERS__.
* config/tilepro/linux-unwind.h (STACK_POINTER_REGNUM): Change use
to __LIBGCC_STACK_POINTER_REGNUM__.
* config/xtensa/unwind-dw2-xtensa.h (DWARF_FRAME_REGISTERS):
Remove conditional definition.
* crtstuff.c (TEXT_SECTION_ASM_OP): Change all uses to
__LIBGCC_TEXT_SECTION_ASM_OP__.
(EH_FRAME_SECTION_NAME): Change all uses to
__LIBGCC_EH_FRAME_SECTION_NAME__.
(EH_TABLES_CAN_BE_READ_ONLY): Change all uses to
__LIBGCC_EH_TABLES_CAN_BE_READ_ONLY__.
(CTORS_SECTION_ASM_OP): Change all uses to
__LIBGCC_CTORS_SECTION_ASM_OP__.
(DTORS_SECTION_ASM_OP): Change all uses to
__LIBGCC_DTORS_SECTION_ASM_OP__.
(JCR_SECTION_NAME): Change all uses to
__LIBGCC_JCR_SECTION_NAME__.
(INIT_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_SECTION_ASM_OP__.
(INIT_ARRAY_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__.
* generic-morestack.c (STACK_GROWS_DOWNWARD): Change all uses to
__LIBGCC_STACK_GROWS_DOWNWARD__.
* libgcc2.c (INIT_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_SECTION_ASM_OP__.
(INIT_ARRAY_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__.
(EH_FRAME_SECTION_NAME): Change all uses to
__LIBGCC_EH_FRAME_SECTION_NAME__.
* libgcov-profiler.c (VTABLE_USES_DESCRIPTORS): Remove conditional
definitions. Change all uses to
__LIBGCC_VTABLE_USES_DESCRIPTORS__.
* unwind-dw2.c (STACK_GROWS_DOWNWARD): Change all uses to
__LIBGCC_STACK_GROWS_DOWNWARD__.
(DWARF_FRAME_REGISTERS): Change all uses to
__LIBGCC_DWARF_FRAME_REGISTERS__.
(EH_RETURN_STACKADJ_RTX): Change all uses to
__LIBGCC_EH_RETURN_STACKADJ_RTX__.
* unwind-dw2.h (DWARF_FRAME_REGISTERS): Remove conditional
definition. Change use to __LIBGCC_DWARF_FRAME_REGISTERS__.
* unwind-sjlj.c (DONT_USE_BUILTIN_SETJMP): Change all uses to
__LIBGCC_DONT_USE_BUILTIN_SETJMP__.
(JMP_BUF_SIZE): Change use to __LIBGCC_JMP_BUF_SIZE__.
From-SVN: r214954
libgcc:
* config/rs6000/ibm-ldouble.c (__gcc_qdiv): Scale up arguments in
case of small numerator and finite nonzero result.
gcc/testsuite:
* gcc.target/powerpc/rs6000-ldouble-3.c: New test.
From-SVN: r206310
libgcc/ChangeLog:
2013-12-03 Adhemerval Zanella <azanella@linux.vnet.ibm.com>
* config/rs6000/ibm-ldouble.c (__gcc_qadd): Fix add
of normal number and qNaN to not raise an inexact exception.
gcc/testsuite/ChangeLog:
2013-12-03 Adhemerval Zanella <azanella@linux.vnet.ibm.com>
* gcc.target/powerpc/pr57363.c: New test.
From-SVN: r205645
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/linux-unwind.h (ppc_fallback_frame_state): Correct
location of CR save area for 64-bit little-endian systems.
Co-Authored-By: Alan Modra <amodra@gmail.com>
From-SVN: r204800
PR target/55431
* config/rs6000/linux-unwind.h (ppc_linux_aux_vector): Delete.
(ppc_fallback_frame_state): Always set up save locations for fp
and altivec. Don't bother with non-callee-saved regs, r0-r13
except for r2 on ppc64, fr0-fr13, v0-v19, vscr.
From-SVN: r196077
libgcc/
* config/rs6000/aix-unwind.h (*_REGNO): New, set of useful
register numbers. LR_REGNO replaces R_LR.
(ucontext_for): New, helper for ...
(ppc_aix_fallback_frame_state): New, implementation for aix 5.2
and 5.3 of ...
(MD_FALLBACK_FRAME_STATE_FOR): Define for 32bit configurations.
testsuite/
* g++.dg/eh/sighandle.C: New testcase.
From-SVN: r187540
gcc/
* config/rs6000/rs6000 (SAVE_INLINE_VRS, REST_INLINE_VRS,
V_SAVE_INLINE, SAVRES_LR, SAVRES_SAVE, SAVRES_REG,
SAVRES_GPR, SAVRES_FPR, SAVRES_VR): Define.
(no_global_regs_above): Delete.
(no_global_regs): New function.
(rs6000_savres_strategy): Handle vector regs. Use proper lr_save_p
value for load multiple test.
(savres_routine_syms): Increase size.
(rs6000_savres_routine_name, rs6000_savres_routine_sym,
ptr_regno_for_savres, rs6000_emit_savres_rtx): Pass in int selector
rather than a number of boolean flags. Update all callers.
(rs6000_savres_routine_name): Generate vector save/restore names.
(rs6000_savres_routine_sym): Handle vector regs. Delete forward decl.
(ptr_regno_for_savres, rs6000_emit_savres_rtx): Likewise.
(rs6000_emit_prologue): Delete saving_FPRs_inline, saving_GPRs_inline
and using_store_multiple. Expand uses. Don't always use r11 as
frame reg when needed for out-of-line saves. Set up initial offset
for out-of-line vector saves when buying stack frame. Handle pointer
reg setup for out-of-line fp save. Emit call to out-of-line vector
save function. Choose r11 or r12 for vrsave reg when available for
better scheduling.
(rs6000_output_function_prologue): Don't emit .extern for ELF.
(rs6000_emit_epilogue): Choose a better frame reg when restoring
from back-chain to suit out-of-line vector restore functions. Emit
call to out-of-line vector restore function. Adjust register used
for cr restore. Tweak pointer register setup for gpr restore.
* config/rs6000/rs6000.h (FIRST_SAVED_GP_REGNO): Take into account
FIXED_R13.
* config/rs6000/sysv4.h (FP_SAVE_INLINE, GP_SAVE_INLINE): Simplify.
(V_SAVE_INLINE): Define.
* config/rs6000/altivec.md (save_vregs_*, restore_vregs_*): New insns.
libgcc/
* config/rs6000/crtsavevr.S: New file.
* config/rs6000/crtrestvr.S: New file.
* config/rs6000/t-savresfgpr: Build the above.
* config/rs6000/t-netbsd: Likewise.
From-SVN: r186800
2012-03-21 Andreas Tobler <andreast@fgznet.ch>
* config.host: Add bits to support powerpc64-*-freebsd*.
* config/rs6000/freebsd-unwind.h: New file.
* config/rs6000/t-freebsd64: New file.
From-SVN: r185614
gcc:
* config/rs6000/rs6000.c (rs6000_emit_prologue): Move update of
VRSave mask to save_world() when that is in use.
libgcc:
* config/rs6000/darwin-world.S (toplevel): Make it clear that this
function is not used for PPC64.
(save_world): Amend comments. Update the VRsave mask to reflect the
saved regs.
(rest_world): Update comments, do not clobber r10, do not use r8.
(eh_rest_world_r10): Amend comments, do not use r8.
(rest_world_eh_r7r8): Rename as local Lrest_world_eh_r7, since r8 is
no longer used, move restore of CR and target address to the end of
the routine.
From-SVN: r182376
