97aa8bb6e2
6 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Joseph Myers
|
9a79452d4c |
Remove LIBGCC2_LONG_DOUBLE_TYPE_SIZE target macro.
This patch removes the target macro LIBGCC2_LONG_DOUBLE_TYPE_SIZE. After recent changes, this macro was used in two ways in libgcc: to determine the mode of long double in dfp-bit.h, and to determine whether a particular mode has excess precision for use in complex multiplication. The former is concerned specifically with long double: it relates to use of strtold for converting between decimal and binary floating point. This is replaced by comparing __LDBL_MANT_DIG__ with the appropriate __LIBGCC_*_MANT_DIG__ macro. The latter is replaced __LIBGCC_*_EXCESS_PRECISION__ predefined macros. Remarks: * Comparing (__LDBL_MANT_DIG__ == __LIBGCC_XF_MANT_DIG__) is more fragile than it looks; it's possible for XFmode to have 53-bit mantissa (TARGET_96_ROUND_53_LONG_DOUBLE, on FreeBSD and DragonFlyBSD 32-bit), in which case such a comparison would not distinguish XFmode and DFmode as possible modes for long double. Fortunately, no target supporting that form of XFmode also supports long double = double (but if some target did, we'd need e.g. an additional macro giving the exponent range of each mode). Furthermore, this code doesn't actually get used for x86 (or any other target with XFmode support), because x86 uses BID not DPD and BID has its own conversion code (which handles conversions for both XFmode and TFmode without needing to go via strtold). And FreeBSD and DragonFlyBSD aren't among the targets with DFP support. So while in principle this code is fragile and it's a deficiency that it can't support both XFmode and TFmode at once (something that can't be solved with the string conversion approach without libc having TS 18661 functions such as strtof128), all these issues should not be a problem in practice. * If other cases of excess precision are supported in future, the code for defining __LIBGCC_*_EXCESS_PRECISION__ may need updating. Although the most likely such cases might not actually involve excess precision for any mode used in libgcc - FLT_EVAL_METHOD being 32 to do _Float16 arithmetic on _Float32 should have the effect of _Complex _Float16 arithmetic using __mulsc3 and __divsc3, rather than currently nonexistent __mulhc3 and __divhc3 as in bug 63250 for ARM. * As has been noted in the context of simultaneous support for __float128 and __ibm128 on Power, the semantics of macros such as LONG_DOUBLE_TYPE_SIZE are problematic because they rely on a poorly-defined precision value for floating-point modes (which seems to be intended as the number of significant bits in the representation, e.g. 80 for XFmode which may be either 12 or 16 bytes) uniquely identifying a mode (although defining an arbitrarily different value for one of the modes you wish to distinguish may work as a hack). It would be cleaner to have a target hook that gives a machine mode directly for float, double and long double, rather than going via these precision values. By eliminating all use of these macros (FLOAT_TYPE_SIZE, DOUBLE_TYPE_SIZE, LONG_DOUBLE_TYPE_SIZE) from code built for the target, this patch facilitates such a conversion to a hook (which I suppose would take some suitable enum as an argument to identify which of the three types to return a mode for). (The issue of multiple type support for DFP conversions would apply in that Power case. <https://gcc.gnu.org/ml/gcc-patches/2014-07/msg01084.html> doesn't seem to touch on it, but it would seem reasonable to punt on it initially as hard to fix. There would also be the issue of getting functions such as __powikf2, __mulkc3, __divkc3 defined, but that's rather easier to address.) Bootstrapped with no regressions on x86_64-unknown-linux-gnu. gcc: * doc/tm.texi.in (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * doc/tm.texi: Regenerate. * system.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Poison. * config/alpha/alpha.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/i386/i386-interix.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/i386/i386.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/i386/rtemself.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/ia64/ia64.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/m68k/m68k.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/m68k/netbsd-elf.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/mips/mips.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/mips/n32-elf.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/msp430/msp430.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/rl78/rl78.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/rs6000/rs6000.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/rx/rx.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/s390/s390.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/sparc/freebsd.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/sparc/linux.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/sparc/linux64.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. * config/sparc/netbsd-elf.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. gcc/c-family: * c-cppbuiltin.c (c_cpp_builtins): Define __LIBGCC_*_EXCESS_PRECISION__ macros for supported floating-point modes. libgcc: * dfp-bit.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. (__LIBGCC_XF_MANT_DIG__): Define if not already defined. (LONG_DOUBLE_HAS_XF_MODE): Define in terms of __LIBGCC_XF_MANT_DIG__. (__LIBGCC_TF_MANT_DIG__): Define if not already defined. (LONG_DOUBLE_HAS_TF_MODE): Define in terms of __LIBGCC_TF_MANT_DIG__. * libgcc2.c (NOTRUNC): Define in terms of __LIBGCC_*_EXCESS_PRECISION__, not LIBGCC2_LONG_DOUBLE_TYPE_SIZE. * libgcc2.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove. From-SVN: r215491 |
||
Joseph Myers
|
8cc4b7a26d |
Remove LIBGCC2_HAS_?F_MODE target macros.
This patch removes the LIBGCC2_HAS_{SF,DF,XF,TF}_MODE target macros, replacing them by predefines with -fbuilding-libgcc, together with a target hook that can influence those predefines when needed. The new default is that a floating-point mode is supported in libgcc if (a) it passes the scalar_mode_supported_p hook (otherwise it's not plausible for it to be supported in libgcc) and (b) it's one of those four modes (since those are the modes for which libgcc hardcodes the possibility of support). The target hook can override the default choice (in either direction) for modes that pass scalar_mode_supported_p (although overriding in the direction of returning true when the default would return false only makes sense if all relevant functions are specially defined in libgcc for that particular target). The previous default settings depended on various settings such as LIBGCC2_LONG_DOUBLE_TYPE_SIZE, as well as targets defining the above target macros if the default wasn't correct. The default scalar_mode_supported_p only declares a floating-point mode to be supported if it matches one of float / double / long double. This means that in most cases where a mode is only supported conditionally in libgcc (TFmode only supported if it's the mode of long double, most commonly), the default gets things right. Overrides were needed in the following cases: * SFmode would always have been supported in libgcc (the condition was BITS_PER_UNIT == 8, true for all current targets), but pdp11 defaults to 64-bit float, and in that case SFmode would fail scalar_mode_supported_p. I don't know if libgcc actually built for pdp11 (and the port may well no longer be being used), but this patch adds a scalar_mode_supported_p hook to it to ensure SFmode is treated as supported. * Certain i386 and ia64 targets need the new hook to match the existing cases for when XFmode or TFmode support is present in libgcc. For i386, the hook can always declare XFmode to be supported - the cases where it's not are the cases where long double is TFmode, in which case XFmode fails scalar_mode_supported_p[*] - but TFmode support needs to be conditional. (And of the targets not defining LIBGCC2_HAS_TF_MODE before this patch, some defined LONG_DOUBLE_TYPE_SIZE to 64, so ensuring LIBGCC2_HAS_TF_MODE would always be false, while others did not define it, so allowing it to be true in the -mlong-double-128 case. This patch matches that logic, although I suspect all the latter targets would have been broken if you tried to enable -mlong-double-128 by default, for lack of the soft-fp TFmode support in libgcc, which is separately configured.) [*] I don't know if it's deliberate not to support __float80 at all with -mlong-double-128. In order to implement the default version of the new hook, insn-modes.h was made to contain macros such as HAVE_TFmode for each machine mode, so the default hook can contain conditionals on whether XFmode and TFmode exist (to match the hardcoding of a list of modes in libgcc). This is also used in fortran/trans-types.c; previously it had a conditional on defined(LIBGCC2_HAS_TF_MODE) (a bit dubious, since it ignored the value of the macro), which is replaced by testing defined(HAVE_TFmode), in conjunction with requiring targetm.libgcc_floating_mode_supported_p. (Fortran is testing something stronger than that hook: not only is libgcc support required, but also libm or equivalent. Thus, it has a test for ENABLE_LIBQUADMATH_SUPPORT in the case that the mode is TFmode and that's not the same as any of the three standard types. The old and new tests are intended to accept exactly the same set of modes for all targets.) Apart from the four target macros eliminated by this patch, it gets us closer to eliminating LIBGCC2_LONG_DOUBLE_TYPE_SIZE as well, though a few more places using that macro need changing first. Bootstrapped with no regressions on x86_64-unknown-linux-gnu; also built cc1 for crosses to ia64-elf and pdp11-none as a minimal test of changes for those targets. gcc: * target.def (libgcc_floating_mode_supported_p): New hook. * targhooks.c (default_libgcc_floating_mode_supported_p): New function. * targhooks.h (default_libgcc_floating_mode_supported_p): Declare. * doc/tm.texi.in (LIBGCC2_HAS_DF_MODE, LIBGCC2_HAS_XF_MODE) (LIBGCC2_HAS_TF_MODE): Remove. (TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): New @hook. * doc/tm.texi: Regenerate. * genmodes.c (emit_insn_modes_h): Define HAVE_%smode for each machine mode. * system.h (LIBGCC2_HAS_SF_MODE, LIBGCC2_HAS_DF_MODE) (LIBGCC2_HAS_XF_MODE, LIBGCC2_HAS_TF_MODE): Poison. * config/i386/cygming.h (LIBGCC2_HAS_TF_MODE): Remove. * config/i386/darwin.h (LIBGCC2_HAS_TF_MODE): Remove. * config/i386/djgpp.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/i386/dragonfly.h (LIBGCC2_HAS_TF_MODE): Remove. * config/i386/freebsd.h (LIBGCC2_HAS_TF_MODE): Remove. * config/i386/gnu-user-common.h (LIBGCC2_HAS_TF_MODE): Remove. * config/i386/i386-interix.h (IX86_NO_LIBGCC_TFMODE): Define. * config/i386/i386.c (ix86_libgcc_floating_mode_supported_p): New function. (TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): Define. * config/i386/i386elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/i386/lynx.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/i386/netbsd-elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/i386/netbsd64.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/i386/nto.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/i386/openbsd.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/i386/openbsdelf.h (LIBGCC2_HAS_TF_MODE): Remove. * config/i386/rtemself.h (IX86_NO_LIBGCC_TFMODE): Define. * config/i386/sol2.h (LIBGCC2_HAS_TF_MODE): Remove. * config/i386/vx-common.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define. * config/ia64/elf.h (IA64_NO_LIBGCC_TFMODE): Define. * config/ia64/freebsd.h (IA64_NO_LIBGCC_TFMODE): Define. * config/ia64/hpux.h (LIBGCC2_HAS_XF_MODE, LIBGCC2_HAS_TF_MODE): Remove. * config/ia64/ia64.c (TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): New macro. (ia64_libgcc_floating_mode_supported_p): New function. * config/ia64/linux.h (LIBGCC2_HAS_TF_MODE): Remove. * config/ia64/vms.h (IA64_NO_LIBGCC_XFMODE) (IA64_NO_LIBGCC_TFMODE): Define. * config/msp430/msp430.h (LIBGCC2_HAS_DF_MODE): Remove. * config/pdp11/pdp11.c (TARGET_SCALAR_MODE_SUPPORTED_P): New macro. (pdp11_scalar_mode_supported_p): New function. * config/rl78/rl78.h (LIBGCC2_HAS_DF_MODE): Remove. * config/rx/rx.h (LIBGCC2_HAS_DF_MODE): Remove. gcc/c-family: * c-cppbuiltin.c (c_cpp_builtins): Define __LIBGCC_HAS_%s_MODE__ macros for floating-point modes. gcc/fortran: * trans-types.c (gfc_init_kinds): Check targetm.libgcc_floating_mode_supported_p for floating-point modes. Check HAVE_TFmode instead of LIBGCC2_HAS_TF_MODE. libgcc: * libgcc2.h (LIBGCC2_HAS_SF_MODE): Define using __LIBGCC_HAS_SF_MODE__. (LIBGCC2_HAS_DF_MODE): Define using __LIBGCC_HAS_DF_MODE__. (LIBGCC2_HAS_XF_MODE): Define using __LIBGCC_HAS_XF_MODE__. (LIBGCC2_HAS_TF_MODE): Define using __LIBGCC_HAS_TF_MODE__. * config/libbid/bid_gcc_intrinsics.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Do not define. (LIBGCC2_HAS_XF_MODE): Define using __LIBGCC_HAS_XF_MODE__. (LIBGCC2_HAS_TF_MODE): Define using __LIBGCC_HAS_TF_MODE__. * fixed-bit.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Do not define. (LIBGCC2_HAS_SF_MODE): Define using __LIBGCC_HAS_SF_MODE__. (LIBGCC2_HAS_DF_MODE): Define using __LIBGCC_HAS_DF_MODE__. From-SVN: r215215 |
||
Joseph Myers
|
66bb34c090 |
Remove SF_SIZE etc. target macros.
gcc: * config/i386/cygming.h (TF_SIZE): Remove. * config/i386/darwin.h (TF_SIZE): Remove. * config/i386/dragonfly.h (TF_SIZE): Remove. * config/i386/freebsd.h (TF_SIZE): Remove. * config/i386/gnu-user-common.h (TF_SIZE): Remove. * config/i386/openbsdelf.h (TF_SIZE): Remove. * config/i386/sol2.h (TF_SIZE): Remove. * config/ia64/hpux.h (XF_SIZE, TF_SIZE): Remove. * config/ia64/linux.h (TF_SIZE): Remove. * doc/tm.texi.in (SF_SIZE, DF_SIZE, XF_SIZE, TF_SIZE): Remove. * doc/tm.texi: Regenerate. * system.h (SF_SIZE, DF_SIZE, XF_SIZE, TF_SIZE): Poison. gcc/c-family: * c-cppbuiltin.c (c_cpp_builtins): Define macros for mantissa digits of floating-point modes if -fbuilding-libgcc. libgcc: * libgcc2.c (SF_SIZE): Change all uses to __LIBGCC_SF_MANT_DIG__. (DF_SIZE): Change all uses to __LIBGCC_DF_MANT_DIG__. (XF_SIZE): Change all uses to __LIBGCC_XF_MANT_DIG__. (TF_SIZE): Change all uses to __LIBGCC_TF_MANT_DIG__. * libgcc2.h (SF_SIZE): Change to __LIBGCC_SF_MANT_DIG__. Give error if not defined and LIBGCC2_HAS_SF_MODE is defined. (DF_SIZE): Change to __LIBGCC_DF_MANT_DIG__. Give error if not defined and LIBGCC2_HAS_DF_MODE is defined. (XF_SIZE): Change to __LIBGCC_XF_MANT_DIG__. Give error if not defined and LIBGCC2_HAS_XF_MODE is defined. (TF_SIZE): Change to __LIBGCC_TF_MANT_DIG__. Give error if not defined and LIBGCC2_HAS_TF_MODE is defined. From-SVN: r215014 |
||
Richard Sandiford
|
ac1dca3cab |
Update copyright years in libgcc/
From-SVN: r206295 |
||
Richard Sandiford
|
5d5bf77569 |
Update copyright in libgcc.
From-SVN: r195731 |
||
Rainer Orth
|
f9989b51a9 |
Move libgcc2 to toplevel libgcc
toplevel: * Makefile.tpl (EXTRA_GCC_FLAGS): Remove LIBGCC2_CFLAGS, LIBGCC2_DEBUG_CFLAGS, LIBGCC2_INCLUDES. * Makefile.in: Regenerate. config: * mh-interix (LIBGCC2_DEBUG_CFLAGS): Remove. gcc: * Makefile.in (LIBGCC2_DEBUG_CFLAGS LIBGCC2_CFLAGS) (LIBGCC2_INCLUDES, TARGET_LIBGCC2_CFLAGS, LIB2FUNCS_EXTRA) (LIB2FUNCS_STATIC_EXTRA, LIB2FUNCS_EXCLUDE, T, T_TARGET) (INCLUDES_FOR_TARGET): Remove. (LIBGCC2_CFLAGS): Don't export. (LIB2FUNCS_ST, LIB2_DIVMOD_FUNCS, LIB2ADD, LIB2ADD_ST, srcdirify): Remove. (libgcc-support): Remove $(LIB2ADD), $(LIB2ADD_ST) dependencies. (libgcc.mvars): Likewise. Don't emit LIB2FUNCS_ST, LIB2FUNCS_EXCLUDE, LIB2ADD, LIB2ADD_ST, LIB2_SIDITI_CONV_FUNCS, LIB2_DIVMOD_FUNCS, LIBGCC2_CFLAGS, TARGET_LIBGCC2_CFLAGS. Emit GTHREAD_FLAGS. * libgcc2.c, libgcc2.h, gbl-ctors.h, longlong.h: Move to ../libgcc. * config/darwin-64.c: Move to ../libgcc/config. * config/divmod.c, config/floatunsidf.c, config/floatunsisf.c, config/floatunsitf.c, config/floatunsixf.c, config/udivmod.c, config/udivmodsi4.c: Move to ../libgcc/config. * config/gthr-posix.c: Move to ../libgcc/config/alpha. * config/memcmp.c, config/memcpy.c, config/memmove.c, config/memset.c: Move to ../libgcc/config. * config/t-darwin (TARGET_LIBGCC2_CFLAGS): Remove. * config/t-freebsd: Remove. * config/t-freebsd-thread: Move to ../libgcc/config. * config/t-libgcc-pic: Move to ../libgcc/config. * config/t-libunwind (TARGET_LIBGCC2_CFLAGS): Remove. * config/t-linux: Remove. * config/t-lynx (TARGET_LIBGCC2_CFLAGS, LIBGCC, INSTALL_LIBGCC): Remove * config/t-openbsd-thread: Move to ../libgcc/config. * config/t-rtems (LIBGCC2_INCLUDES): Remove. * config/t-sol2 (TARGET_LIBGCC2_CFLAGS): Remove. * config/t-svr4: Remove. * config/t-vxworks (LIBGCC, INSTALL_LIBGCC, TARGET_LIBGCC2_CFLAGS) (LIBGCC2_DEBUG_CFLAGS, LIB2FUNCS_EXTRA, LIBGCC2_INCLUDES): Remove. * config/vxlib.c, config/vxlib-tls.c: Move to ../libgcc/config. * config/alpha/qrnnd.asm: Move to ../libgcc/config/alpha/qrnnd.S. * config/alpha/t-alpha, config/alpha/t-ieee: Remove. * config/alpha/t-vms (LIB2FUNCS_EXTRA, LIBGCC, INSTALL_LIBGCC): Remove. * config/alpha/vms-gcc_shell_handler.c: Move to ../libgcc/config/alpha. * config/arm/bpabi.c, config/arm/unaligned-funcs.c, config/arm/fp16.c, config/arm/linux-atomic.c, config/arm/linux-atomic-64bit.c: Move to ../libgcc/config/arm. * config/arm/t-arm-elf (LIBGCC, INSTALL_LIBGCC) (TARGET_LIBGCC2_CFLAGS): Remove. * config/arm/t-bpabi, config/arm/t-linux: Remove. * config/arm/t-linux-eabi (TARGET_LIBGCC2_CFLAGS) (LIB2FUNCS_STATIC_EXTRA): Remove. * config/arm/t-netbsd: Remove. * config/arm/t-strongarm-elf (LIBGCC, INSTALL_LIBGCC) (TARGET_LIBGCC2_CFLAGS): Remove. * config/arm/t-symbian (LIB2FUNCS_STATIC_EXTRA): Remove. * config/arm/t-wince-pe (LIBGCC, INSTALL_LIBGCC) (TARGET_LIBGCC2_CFLAGS): Remove. * config/avr/t-avr (LIB2FUNCS_EXCLUDE, TARGET_LIBGCC2_CFLAGS) (LIBGCC, INSTALL_LIBGCC): Remove. * config/bfin/t-bfin-elf (TARGET_LIBGCC2_CFLAGS): Remove. * config/bfin/t-bfin-linux: Likewise. * config/bfin/t-bfin-uclinux: Likewise. * config/c6x/eqd.c, config/c6x/eqf.c, config/c6x/ged.c, config/c6x/gef.c, config/c6x/gtd.c, config/c6x/gtf.c, config/c6x/led.c, config/c6x/lef.c, config/c6x/ltd.c, config/c6x/ltf.c: Move to ../libgcc/config/c6x. * config/c6x/t-c6x-elf (LIB2FUNCS_EXCLUDE, LIB2FUNCS_EXTRA): Remove. * config/c6x/t-c6x-uclinux (TARGET_LIBGCC2_CFLAGS): Remove. * config/cris/arit.c: Move to ../libgcc/config/cris. * config/cris/cris_abi_symbol.c: Remove. * config/cris/cris.h: Remove obsolete comment. * config/cris/mulsi3.asm: Move to ../libgcc/config/cris/mulsi3.S. * config/cris/t-cris (LIB2FUNCS_EXTRA, CRIS_LIB1CSRC) ($(LIB2FUNCS_EXTRA)): Remove. * config/cris/t-elfmulti (LIB2FUNCS_STATIC_EXTRA, INSTALL_LIBGCC) (LIBGCC): Remove. * config/cris/t-linux (TARGET_LIBGCC2_CFLAGS): Remove. * config/fr30/t-fr30: Remove. * config/frv/cmovd.c, config/frv/cmovh.c, config/frv/cmovw.c, config/frv/modi.c, config/frv/uitod.c, config/frv/uitof.c, config/frv/ulltod.c, config/frv/ulltof.c, config/frv/umodi.c: Move to ../libgcc/config/frv. * config/frv/t-frv (LIB2FUNCS_EXTRA, TARGET_LIBGCC2_CFLAGS) (cmovh.c, cmovw.c, cmovd.c, modi.c, umodi.c, uitof.c, uitod.c) (ulltof.c, LIBGCC, INSTALL_LIBGCC): Remove. * config/frv/t-linux (TARGET_LIBGCC2_CFLAGS): Remove. * config/h8300/clzhi2.c, config/h8300/ctzhi2.c, config/h8300/fixunssfsi.c, config/h8300/parityhi2.c, config/h8300/popcounthi2.c: Move to ../libgcc/config/h8300. * config/h8300/t-h8300 (LIB2FUNCS_EXTRA, TARGET_LIBGCC2_CFLAGS) (LIBGCC, INSTALL_LIBGCC): Remove. * config/i386/gthr-win32.c: Move to ../libgcc/config/i386. * config/i386/t-cygming (LIBGCC2_INCLUDES): Remove. * config/i386/t-cygwin: Remove. * config/i386/t-darwin (LIB2_SIDITI_CONV_FUNCS, LIB2FUNCS_EXTRA) (LIB2FUNCS_EXCLUDE): Remove. * config/i386/t-darwin64 (LIB2_SIDITI_CONV_FUNCS, LIB2FUNCS_EXTRA) (LIBGCC, INSTALL_LIBGCC): Remove. * config/i386/t-gthr-win32: Move to ../libgcc/config/i386. * config/i386/t-linux64 (LIBGCC, INSTALL_LIBGCC): Remove. * config/i386/t-mingw-w32: Likewise. * config/i386/t-mingw-w64: Likewise. * config/i386/t-openbsd: Likewise. * config/i386/t-nto: Remove. * config/ia64/quadlib.c: Move to ../libgcc/config/ia64. * config/ia64/t-hpux (LIBGCC, INSTALL_LIBGCC, LIB2FUNCS_EXTRA) (quadlib.c): Remove. * config/ia64/t-ia64: Remove comment. * config/iq2000/lib2extra-funcs.c: Move to ../libgcc/config/iq2000/lib2funcs.c. * config/iq2000/t-iq2000: Remove. * config/m32c/m32c-lib2.c: Move to ../libgcc/config/m32c/lib2funcs.c. * config/m32c/m32c-lib2-trapv.c: Move to ../libgcc/config/m32c/trapv.c. * config/m32r/t-linux (TARGET_LIBGCC2_CFLAGS): Remove. * config/m32c/t-m32c (LIB2FUNCS_EXTRA): Remove. * config/m32r/t-m32r (TARGET_LIBGCC2_CFLAGS, LIBGCC) (INSTALL_LIBGCC): Remove. * config/m68k/fpgnulib.c: Move to ../libgcc/config/m68k. * config/m68k/t-floatlib: Remove. * config/m68k/t-mlibs (LIBGCC, INSTALL_LIBGCC): Remove. * config/mcore/t-mcore (TARGET_LIBGCC2_CFLAGS): Remove. Fix typo. (LIBGCC, INSTALL_LIBGCC): Remove. * config/mep/mep-lib2.c: Move to ../libgcc/config/mep/lib2funcs.c. * config/mep/mep-tramp.c: Move to ../libgcc/config/mep/tramp.c. * config/mep/t-mep (LIB2FUNCS_EXTRA): Remove. * config/mips/t-elf (TARGET_LIBGCC2_CFLAGS, LIBGCC) (INSTALL_LIBGCC): Remove. * config/mips/t-isa3264: Likewise. * config/mips/t-mips (LIB2_SIDITI_CONV_FUNCS): Remove. * config/mips/t-r3900 (TARGET_LIBGCC2_CFLAGS, LIBGCC) (INSTALL_LIBGCC): Remove. * config/mips/t-sde (LIBGCC, INSTALL_LIBGCC): Remove. * config/mips/t-sr71k (TARGET_LIBGCC2_CFLAGS, LIBGCC) (INSTALL_LIBGCC): Remove. * config/mips/t-vr (TARGET_LIBGCC2_CFLAGS) (LIB2FUNCS_STATIC_EXTRA): Remove. * config/mips/vr4120-div.S: Move to ../libgcc/config/mips. * config/mmix/t-mmix (TARGET_LIBGCC2_CFLAGS): Remove. * config/mn10300/t-mn10300 (LIBGCC, INSTALL_LIBGCC): Remove. * config/pa/fptr.c, config/pa/linux-atomic.c: Move to ../libgcc/config/pa. * config/pa/lib2funcs.asm: Move to ../libgcc/config/pa/lib2funcs.S. * config/pa/quadlib.c: Move to ../libgcc/config/pa. * config/pa/t-dce-thr (LIBGCC, INSTALL_LIBGCC): Remove. * config/pa/t-linux, config/pa/t-linux64: Remove. * config/pa/t-pa-hpux, config/pa/t-pa-hpux10, config/pa/t-pa-hpux11, config/pa/t-pa64: Remove. * config/pdp11/t-pdp11 (TARGET_LIBGCC2_CFLAGS, LIB2FUNCS_EXTRA): Remove. * config/picochip/libgccExtras: Move to ../libgcc/config/picochip. * config/picochip/t-picochip (LIB2FUNCS_EXTRA, RANLIB_FOR_TARGET) (TARGET_LIBGCC2_CFLAGS, LIBGCC2_DEBUG_CFLAGS): Remove. * config/rs6000/crtresfpr.asm: Move to ../libgcc/config/rs6000/crtresfpr.S. * config/rs6000/crtresgpr.asm: Move to ../libgcc/config/rs6000/crtresgpr.S. * config/rs6000/crtresxfpr.asm: Move to ../libgcc/config/rs6000/crtresxfpr.S. * config/rs6000/crtresxgpr.asm: Move to ../libgcc/config/rs6000/crtresxgpr.S. * config/rs6000/crtsavfpr.asm: Move to ../libgcc/config/rs6000/crtsavfpr.S. * config/rs6000/crtsavgpr.asm: Move to ../libgcc/config/rs6000/crtsavgpr.S. * config/rs6000/darwin-asm.h: Move to ../libgcc/config/rs6000. * config/rs6000/darwin-fpsave.asm: Move to ../libgcc/config/rs6000/darwin-fpsave.S. * config/rs6000/darwin-gpsave.asm: Move to ../libgcc/config/rs6000/darwin-gpsave.S. * config/rs6000/darwin-tramp.asm: Move to ../libgcc/config/rs6000/darwin-tramp.S. * config/rs6000/darwin-vecsave.asm: Move to ../libgcc/config/rs6000/darwin-vecsave.S. * config/rs6000/darwin-world.asm: Move to ../libgcc/config/rs6000/darwin-world.S. * config/rs6000/e500crtres32gpr.asm: Move to ../libgcc/config/rs6000/e500crtres32gpr.S. * config/rs6000/e500crtres64gpr.asm: Move to ../libgcc/config/rs6000/e500crtres64gpr.S. * config/rs6000/e500crtres64gprctr.asm: Move to ../libgcc/config/rs6000/e500crtres64gprctr.S. * config/rs6000/e500crtrest32gpr.asm: Move to ../libgcc/config/rs6000/e500crtrest32gpr.S. * config/rs6000/e500crtrest64gpr.asm: Move to ../libgcc/config/rs6000/e500crtrest64gpr.S. * config/rs6000/e500crtresx32gpr.asm: Move to ../libgcc/config/rs6000/e500crtresx32gpr.S. * config/rs6000/e500crtresx64gpr.asm: Move to ../libgcc/config/rs6000/e500crtresx64gpr.S. * config/rs6000/e500crtsav32gpr.asm: Move to ../libgcc/config/rs6000/e500crtsav32gpr.S. * config/rs6000/e500crtsav64gpr.asm: Move to ../libgcc/config/rs6000/e500crtsav64gpr.S. * config/rs6000/e500crtsav64gprctr.asm: Move to ../libgcc/config/rs6000/e500crtsav64gprctr.S. * config/rs6000/e500crtsavg32gpr.asm: Move to ../libgcc/config/rs6000/e500crtsavg32gpr.S. * config/rs6000/e500crtsavg64gpr.asm: Move to ../libgcc/config/rs6000/e500crtsavg64gpr.S. * config/rs6000/e500crtsavg64gprctr.asm: Move to ../libgcc/config/rs6000/e500crtsavg64gprctr.S. * config/rs6000/eabi.asm: Move to ../libgcc/config/rs6000/eabi.S. * config/rs6000/t-aix43 (LIBGCC, INSTALL_LIBGCC, LIB2FUNCS_EXTRA) (TARGET_LIBGCC2_CFLAGS): Remove. * config/rs6000/t-aix52: Likewise. * config/rs6000/t-darwin: Remove. * config/rs6000/t-darwin64 (LIB2_SIDITI_CONV_FUNCS) (LIB2FUNCS_EXTRA): Remove. * config/rs6000/t-fprules (LIBGCC, INSTALL_LIBGCC): Remove. * config/rs6000/t-linux64 (TARGET_LIBGCC2_CFLAGS): Remove. * config/rs6000/t-lynx (LIB2FUNCS_EXTRA, tramp.S, LIBGCC) (INSTALL_LIBGCC): Remove. * config/rs6000/t-netbsd (LIB2FUNCS_EXTRA) (LIB2FUNCS_STATIC_EXTRA, tramp.S, crtsavfpr.S, crtresfpr.S) (crtsavgpr.S, crtresgpr.S, crtresxfpr.S, crtresxgpr.S, LIBGCC) (INSTALL_LIBGCC, $(T)crtsavfpr$(objext), $(T)crtresfpr$(objext)) (($(T)crtsavgpr$(objext), $(T)crtresgpr$(objext), $(T)crtresxfpr$(objext), $(T)crtresxgpr$(objext)): Remove. * config/rs6000/t-ppccomm (LIB2FUNCS_EXTRA) (LIB2FUNCS_STATIC_EXTRA, eabi.S, tramp.S): Remove. * config/rs6000/t-spe (LIBGCC, INSTALL_LIBGCC): Remove. * config/rs6000/t-vxworks: Remove comment. * config/rs6000/tramp.asm: Move to ../libgcc/config/rs6000/tramp.S. * config/rx/t-rx (LIBGCC, INSTALL_LIBGCC): Remove. * config/sh/linux-atomic.asm: Move to ../libgcc/config/sh/linux-atomic.S. * config/sh/t-linux (LIB2FUNCS_EXTRA): Remove. * config/sh/t-netbsd: Remove. * config/sh/t-sh (TARGET_LIBGCC2_CFLAGS, LIBGCC, INSTALL_LIBGCC): Remove. * config/sparc/t-elf (LIBGCC, INSTALL_LIBGCC): Remove. * config/sparc/t-leon: Likewise. * config/sparc/t-leon3: Likewise. * config/sparc/t-linux64: Likewise. * config/sparc/t-netbsd64: Fix typo. Remove comment. * config/spu/divmodti4.c, config/spu/divv2df3.c, config/spu/float_disf.c, config/spu/float_unsdidf.c, config/spu/float_unsdisf.c, config/spu/float_unssidf.c, config/spu/mfc_multi_tag_release.c, config/spu/mfc_multi_tag_reserve.c, config/spu/mfc_tag_release.c, config/spu/mfc_tag_reserve.c, config/spu/mfc_tag_table.c, config/spu/multi3.c: Move to ../libgcc/config/spu. * config/spu/t-spu-elf (TARGET_LIBGCC2_CFLAGS, LIB2FUNCS_EXCLUDE) (LIB2FUNCS_STATIC_EXTRA, LIB2_SIDITI_CONV_FUNCS, LIBGCC) (INSTALL_LIBGCC): Remove. * config/stormy16/stormy16-lib2.c: Move to ../libgcc/config/stormy16/lib2.c. * config/stormy16/stormy16-lib2-ashlsi3.c: Move to ../libgcc/config/stormy16/ashlsi3.c. * config/stormy16/stormy16-lib2-ashrsi3.c: Move to ../libgcc/config/stormy16/ashrsi3.c. * config/stormy16/stormy16-lib2-clzhi2.c: Move to ../libgcc/config/stormy16/clzhi2.c. * config/stormy16/stormy16-lib2-cmpsi2.c: Move to ../libgcc/config/stormy16/cmpsi2.c. * config/stormy16/stormy16-lib2-ctzhi2.c: Move to ../libgcc/config/stormy16/ctzhi2.c. * config/stormy16/stormy16-lib2-divsi3.c: Move to ../libgcc/config/stormy16/divsi3.c. * config/stormy16/stormy16-lib2-ffshi2.c: Move to ../libgcc/config/stormy16/ffshi2.c. * config/stormy16/stormy16-lib2-lshrsi3.c: Move to ../libgcc/config/stormy16/lshrsi3.c. * config/stormy16/stormy16-lib2-modsi3.c: Move to ../libgcc/config/stormy16/modsi3.c. * config/stormy16/stormy16-lib2-parityhi2.c: Move to ../libgcc/config/stormy16/parityhi2.c. * config/stormy16/stormy16-lib2-popcounthi2.c: Move to ../libgcc/config/stormy16/popcounthi2.c. * config/stormy16/stormy16-lib2-ucmpsi2.c: Move to ../libgcc/config/stormy16/ucmpsi2.c. * config/stormy16/stormy16-lib2-udivmodsi4.c: Move to ../libgcc/config/stormy16/udivmodsi4.c. * config/stormy16/stormy16-lib2-udivsi3.c: Move to ../libgcc/config/stormy16/udivsi3.c. * config/stormy16/stormy16-lib2-umodsi3.c: Move to ../libgcc/config/stormy16/umodsi3.c. * config/stormy16/t-stormy16: Move to ../libgcc/config/t-stormy16. * config/v850/t-v850 (INSTALL_LIBGCC): Remove. * config/xtensa/lib2funcs.S: Move to ../libgcc/config/xtensa. * config/xtensa/t-elf: Remove. * config/xtensa/t-xtensa (LIB2FUNCS_EXTRA): Remove. * config.gcc (*-*-freebsd*): Remove t-freebsd, t-freebsd-thread from tmake_file. (*-*-linux*, frv-*-*linux*, *-*-kfreebsd*-gnu, *-*-knetbsd*-gnu, *-*-gnu*, *-*-kopensolaris*-gnu): Remove t-linux from tmake_file. (*-*-netbsd*): Remove t-libgcc-pic from tmake_file. (*-*-openbsd*): Likewise. Remove t-openbsd-thread for posix threads. (alpha*-*-linux*): Remove alpha/t-alpha, alpha/t-ieee from tmake_file. (alpha*-*-freebsd*): Likewise. (alpha*-*-netbsd*): Likewise. (alpha*-*-openbsd*): Likewise. (alpha64-dec-*vms*): Likewise. (alpha*-dec-*vms*): Likewise. (arm*-*-netbsdelf*): Remove arm/t-netbsd from tmake_file. (arm*-*-linux*): Remove t-linux from tmake_file. Remove arm/t-bpabi from tmake_file for arm*-*-linux-*eabi. (arm*-*-uclinux*): Remove arm/t-bpabi from tmake_file for arm*-*-uclinux*eabi. (arm*-*-eabi*, arm*-*-symbianelf* ): Remove arm/t-bpabi from tmake_file for arm*-*-eabi*. (fr30-*-elf): Remove tmake_file. (hppa*64*-*-linux*): Remove tmake_file. (hppa*-*-linux*): Likewise. (hppa[12]*-*-hpux10*): Remove pa/t-pa-hpux10, pa/t-pa-hpux from tmake_file. (hppa*64*-*-hpux11*): Remove pa/t-pa64, pa/t-pa-hpux from tmake_file. (hppa[12]*-*-hpux11*): Remove pa/t-pa-hpux11, pa/t-pa-hpux from tmake_file. (i[34567]86-*-elf*): Remove tmake_file. (x86_64-*-elf*): Likewise. (i[34567]86-*-nto-qnx*): Likewise. (i[34567]86-*-cygwin*): Remove i386/t-cygwin from tmake_file. (i[34567]86-*-mingw*, x86_64-*-mingw*): Remove i386/t-gthr-win32 from tmake_file if using win32 threads. (iq2000*-*-elf*): Remove tmake-file. (microblaze*-linux*): Likewise. (sh-*-elf*, sh[12346l]*-*-elf*, sh-*-linux*) (sh[2346lbe]*-*-linux*, sh-*-netbsdelf*, shl*-*-netbsdelf*) (sh5-*-netbsd*, sh5l*-*-netbsd*, sh64-*-netbsd*) (sh64l*-*-netbsd*): Remove sh/t-netbsd from tmake_file for sh5*-*-netbsd*, sh64*-netbsd*, *-*-netbsd. (xtensa*-*-elf*): Remove tmake_file. gcc/po: * EXCLUDES (config/vxlib.c, gbl-ctors.h, libgcc2.c, libgcc2.h) (longlong.h): Remove. libgcc: * configure.ac: Include ../config/picflag.m4. (GCC_PICFLAG): Call it. Substitute. * configure: Regenerate. * Makefile.in (gcc_srcdir): Remove. (LIBGCC2_DEBUG_CFLAGS, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES) (HOST_LIBGCC2_CFLAGS, PICFLAG, LIB2FUNCS_ST, LIB2FUNCS_EXCLUDE) (LIB2_DIVMOD_FUNCS, LIB2ADD, LIB2ADD_ST): Set. ($(lib2funcs-o), $(lib2funcs-s-o), $(lib2-divmod-o)) ($(lib2-divmod-s-o)): Use $(srcdir) to refer to libgcc2.c. Use $<. Remove comment. * libgcc2.c, libgcc2.h, gbl-ctors.h, longlong.h: New files. * siditi-object.mk ($o$(objext), $(o)_s$(objext)): Use $(srcdir) to refer to libgcc2.c. Use $<. * config/darwin-64.c: New file. * config/darwin-crt3.c: Remove comment. * config/divmod.c, config/floatunsidf.c, config/floatunsisf.c, config/floatunsitf.c, config/floatunsixf.c, config/udivmod.c, config/udivmodsi4.c: New files. * config/memcmp.c, config/memcpy.c, config/memmove.c, config/memset.c: New files. * config/t-crtstuff-pic (CRTSTUFF_T_CFLAGS_S): Use $(PICFLAG). * config/t-darwin (HOST_LIBGCC2_CFLAGS): Set. * config/t-freebsd-thread, config/t-libgcc-pic: New files. * config/t-libunwind (HOST_LIBGCC2_CFLAGS): Set. * config/t-openbsd-thread: New file. * config/t-sol2 (HOST_LIBGCC2_CFLAGS): Remove. * config/t-vxworks, config/vxlib-tls.c, config/vxlib.c: New files. * config/alpha/gthr-posix.c, config/alpha/qrnnd.S: New files. * config/alpha/t-alpha (LIB2ADD): Use $(srcdir) to refer to qrnnd.S. Adapt filename. * config/alpha/t-osf-pthread (LIB2ADD): Use $(srcdir)/config/alpha to refer to gthr-posix.c. * config/alpha/t-vms (LIB2ADD): Set. * config/alpha/vms-gcc_shell_handler.c: New file. * config/arm/bpabi.c, config/arm/fp16.c, config/arm/linux-atomic.c, config/arm/linux-atomic-64bit.c, config/arm/unaligned-funcs.c: New files. * config/arm/t-bpabi (LIB2ADD, LIB2ADD_ST): Set. * config/arm/t-elf (HOST_LIBGCC2_CFLAGS): Set. * config/arm/t-linux: Likewise. * config/arm/t-linux-eabi (LIB2ADD_ST): Add. * config/arm/t-netbsd: New file. * config/arm/t-strongarm-elf (HOST_LIBGCC2_CFLAGS): Set. * config/arm/t-symbian (LIB2ADD_ST): Set. * config/avr/t-avr (LIB2FUNCS_EXCLUDE, HOST_LIBGCC2_CFLAGS): Set. * config/bfin/t-crtstuff (CRTSTUFF_T_CFLAGS): Use $(PICFLAG). * config/bfin/t-elf: New file. * config/c6x/eqd.c, config/c6x/eqf.c, config/c6x/ged.c, config/c6x/gef.c, config/c6x/gtd.c, config/c6x/gtf.c, config/c6x/led.c, config/c6x/lef.c, config/c6x/ltd.c, config/c6x/ltf.c: New files. * config/c6x/t-elf (LIB2FUNCS_EXCLUDE, LIB2ADD) (HOST_LIBGCC2_CFLAGS): Set. * config/c6x/t-uclinux (HOST_LIBGCC2_CFLAGS): Set. (CRTSTUFF_T_CFLAGS): Use $(PICFLAG). * config/cris/arit.c, config/cris/mulsi3.S, config/cris/t-cris: New files. * config/cris/t-elfmulti (LIB2ADD_ST): Set. * config/cris/t-linux (HOST_LIBGCC2_CFLAGS): Remove. * config/frv/cmovd.c, config/frv/cmovh.c, config/frv/cmovw.c, config/frv/modi.c, config/frv/uitod.c, config/frv/uitof.c, config/frv/ulltod.c, config/frv/ulltof.c, config/frv/umodi.c: New files. * config/frv/t-frv (LIB2ADD): Set. * config/frv/t-linux (CRTSTUFF_T_CFLAGS): Use $(PICFLAG). * config/h8300/clzhi2.c, config/h8300/ctzhi2.c, config/h8300/fixunssfsi.c, config/h8300/parityhi2.c, config/h8300/popcounthi2.c: New files. * config/h8300/t-h8300 (LIB2ADD, HOST_LIBGCC2_CFLAGS): Set. * config/i386/gthr-win32.c: New file. * config/i386/t-cygming (LIBGCC2_INCLUDES): Set. * config/i386/t-cygwin: Likewise. * config/i386/t-darwin, config/i386/t-darwin64, config/i386/t-gthr-win32, config/i386/t-interix: New files. * config/i386/t-nto (HOST_LIBGCC2_CFLAGS): Set. (CRTSTUFF_T_CFLAGS): Use $(PICFLAG). * config/i386/t-sol2 (CRTSTUFF_T_CFLAGS): Use $(PICFLAG). * config/ia64/quadlib.c: New file. * config/ia64/t-hpux (LIB2ADD): Set. * config/ia64/t-ia64: Add comment. * config/iq2000/lib2funcs.c, config/iq2000/t-iq2000: New files. * config/lm32/t-uclinux (CRTSTUFF_T_CFLAGS): Use $(PICFLAG). (HOST_LIBGCC2_CFLAGS): Append, remove -fPIC. * config/m32c/lib2funcs.c, config/m32c/trapv.c: New files. * config/m32c/t-m32c (LIB2ADD): Set. * config/m32r/t-linux (HOST_LIBGCC2_CFLAGS): Set. * config/m32r/t-m32r: Likewise. * config/m68k/fpgnulib.c: New file. * config/m68k/t-floatlib (LIB2ADD): Set. (xfgnulib.c): New target. * config/mcore/t-mcore (HOST_LIBGCC2_CFLAGS): Set. * config/mep/lib2funcs.c, config/mep/tramp.c: New files. * config/mep/t-mep (LIB2ADD): Set. * config/microblaze/divsi3.asm: Rename to divsi3.S. * config/microblaze/moddi3.asm: Rename to moddi3.S. * config/microblaze/modsi3.asm: Rename to modsi3.S. * config/microblaze/muldi3_hard.asm: Rename to hard.S. * config/microblaze/mulsi3.asm: Rename to mulsi3.S. * config/microblaze/stack_overflow_exit.asm: Rename to exit.S. * config/microblaze/udivsi3.asm: Rename to udivsi3.S. * config/microblaze/umodsi3.asm: Rename to umodsi3.S. * config/microblaze/t-microblaze (LIB2ADD): Reflect this. * config/mips/t-elf, config/mips/t-vr, config/mips/vr4120-div.S: New files. * config/mips/t-mips (LIB2_SIDITI_CONV_FUNCS): Set. * config/mmix/t-mmix (HOST_LIBGCC2_CFLAGS): Set. * config/pa/fptr.c, config/pa/lib2funcs.S, config/pa/linux-atomic.c, config/pa/quadlib.c: New files. * config/pa/t-linux (HOST_LIBGCC2_CFLAGS): Set. (LIB2ADD, LIB2ADD_ST): Set. * config/pa/t-hpux, config/pa/t-hpux10, config/pa/t-pa64: New files. * config/pa/t-linux (HOST_LIBGCC2_CFLAGS, LIB2ADD, LIB2ADD_ST): Set. * config/pa/t-linux64 (LIB2ADD_ST, HOST_LIBGCC2_CFLAGS): Set. * config/pdp11/t-pdp11: New file. * config/picochip/libgccExtras/adddi3.S, config/picochip/libgccExtras/ashlsi3.S, config/picochip/libgccExtras/ashrsi3.S, config/picochip/libgccExtras/clzsi2.S, config/picochip/libgccExtras/cmpsi2.S, config/picochip/libgccExtras/divmod15.S, config/picochip/libgccExtras/divmodhi4.S, config/picochip/libgccExtras/divmodsi4.S, config/picochip/libgccExtras/lshrsi3.S, config/picochip/libgccExtras/parityhi2.S, config/picochip/libgccExtras/popcounthi2.S, config/picochip/libgccExtras/subdi3.S, config/picochip/libgccExtras/ucmpsi2.S, config/picochip/libgccExtras/udivmodhi4.S, config/picochip/libgccExtras/udivmodsi4.S: New files. * config/picochip/t-picochip (LIB2ADD, HOST_LIBGCC2_CFLAGS) (LIBGCC2_DEBUG_CFLAGS, RANLIB_FOR_TARGET): Set. * config/rs6000/crtresfpr.S, config/rs6000/crtresgpr.S, config/rs6000/crtresxfpr.S, config/rs6000/crtresxgpr.S, config/rs6000/crtsavfpr.S, config/rs6000/crtsavgpr.S) config/rs6000/darwin-asm.h, config/rs6000/darwin-fpsave.S, config/rs6000/darwin-gpsave.S, config/rs6000/darwin-tramp.S, config/rs6000/darwin-vecsave.S, config/rs6000/darwin-world.S: New files. * config/rs6000/t-darwin (LIB2ADD, LIB2ADD_ST) (HOST_LIBGCC2_CFLAGS): Set. * config/rs6000/t-darwin64: New file. * config/rs6000/t-linux64 (HOST_LIBGCC2_CFLAGS): Set. * config/rs6000/t-lynx, config/rs6000/t-netbsd: New files. * config/rs6000/t-ppccomm (LIB2ADD): Add $(srcdir)/config/rs6000/tramp.S. (LIB2ADD_ST): Use $(srcdir)/config/rs6000 to refer to sources. Add $(srcdir)/config/rs6000/eabi.S. (crtsavfpr.S, crtresfpr.S, crtsavgpr.S, crtresgpr.S, crtresxfpr.S) (crtresxgpr.S, e500crtres32gpr.S, e500crtres64gpr.S) (e500crtres64gprctr.S, e500crtrest32gpr.S, e500crtrest64gpr.S) (e500crtresx32gpr.S, e500crtresx64gpr.S, e500crtsav32gpr.S) (e500crtsav64gpr.S, e500crtsav64gprctr.S, e500crtsavg32gpr.S) (e500crtsavg64gpr.S, e500crtsavg64gprctr.S): Remove. * config/rs6000/tramp.S: New file. * config/s390/t-tpf: Remove. * config/sh/linux-atomic.S: New file. * config/sh/t-linux (LIB2ADD): Set. (HOST_LIBGCC2_CFLAGS): Append, remove -fpic. * config/sh/t-netbsd (LIB2ADD, HOST_LIBGCC2_CFLAGS): Set. * config/sh/t-sh (unwind-dw2-Os-4-200.o): Use $(srcdir) to refer to unwind-dw2.c. (HOST_LIBGCC2_CFLAGS): Set. * config/sparc/t-sol2 (CRTSTUFF_T_CFLAGS): Use $(PICFLAG). * config/spu/divmodti4.c, config/spu/divv2df3.c, config/spu/float_disf.c, config/spu/float_unsdidf.c, config/spu/float_unsdisf.c, config/spu/float_unssidf.c, config/spu/mfc_multi_tag_release.c, config/spu/mfc_multi_tag_reserve.c, config/spu/mfc_tag_release.c, config/spu/mfc_tag_reserve.c, config/spu/mfc_tag_table.c, config/spu/multi3.c: New files. * config/spu/t-elf (LIB2ADD, LIB2ADD_ST, LIB2_SIDITI_CONV_FUNCS) (HOST_LIBGCC2_CFLAGS): Set. * config/stormy16/ashlsi3.c, config/stormy16/ashrsi3.c, config/stormy16/clzhi2.c, config/stormy16/cmpsi2.c, config/stormy16/ctzhi2.c, config/stormy16/divsi3.c, config/stormy16/ffshi2.c, config/stormy16/lib2.c, config/stormy16/lshrsi3.c, config/stormy16/modsi3.c, config/stormy16/parityhi2.c, config/stormy16/popcounthi2.c, config/stormy16/t-stormy16, config/stormy16/ucmpsi2.c, config/stormy16/udivmodsi4.c, config/stormy16/udivsi3.c, config/stormy16/umodsi3.c: New files. * config/xtensa/lib2funcs.S: New file. * config/xtensa/t-elf (HOST_LIBGCC2_CFLAGS): Set. * config/xtensa/t-xtensa (LIB2ADD): Set. * config.host (*-*-darwin*): Add t-libgcc-pic to tmake_file. (*-*-freebsd*): Add t-freebsd, t-libgcc-pic to tmake_file. Add t-freebsd-thread to tmake_file for posix threads. (*-*-linux*, frv-*-*linux*, *-*-kfreebsd*-gnu, *-*-knetbsd*-gnu) (*-*-gnu*, *-*-kopensolaris*-gnu): Add t-libgcc-pic to tmake_file. (*-*-lynxos*): Likewise. (*-*-netbsd*): Likewise. (*-*-openbsd*): Likewise. Add t-openbsd-thread to tmake_file for posix threads. (*-*-solaris2*): Add t-libgcc-pic to tmake_file. (*-*-vxworks*): Set tmake_file. (alpha*-*-linux*): Add alpha/t-alpha, alpha/t-ieee to tmake_file. (alpha*-*-freebsd*): Likewise. (alpha*-*-netbsd*): Likewise. (alpha*-*-openbsd*): Likewise. (alpha*-dec-osf5.1*): Remove qrnnd.o, gthr-posix.o from extra_parts. (alpha64-dec-*vms*): Add alpha/t-alpha, alpha/t-ieee to tmake_file. (alpha*-dec-*vms*): Likewise. (arm*-*-netbsdelf*): Add arm/t-netbsd to tmake_file. (bfin*-elf*): Add bfin/t-elf to tmake_file. (bfin*-uclinux*): Likewise. (bfin*-linux-uclibc*): Likewise. (crisv32-*-elf): Add cris/t-cris to tmake_file. (crisv32-*-none): Likewise. (cris-*-elf): Likewise. (cris-*-none): Likewise. (cris-*-linux*, crisv32-*-linux*): Likewise. (hppa[12]*-*-hpux10*): Add pa/t-hpux pa/t-hpux10, t-libgcc-pic to tmake_file. (hppa*64*-*-hpux11*): Add pa/t-hpux, pa/t-pa64, t-libgcc-pic to tmake_file. (hppa[12]*-*-hpux11*): Add pa/t-hpux, t-libgcc-pic to tmake_file. (i[34567]86-*-elf*): Add t-libgcc-pic to tmake_file. (x86_64-*-elf*): Likewise. (i[34567]86-*-nto-qnx*): Likewise. (i[34567]86-*-mingw*): Add i386/t-gthr-win32 to tmake_file for win32 threads. (x86_64-*-mingw*): Likewise. (i[34567]86-*-interix3*): Add i386/t-interix to tmake_file. (lm32-*-uclinux*): Add t-libgcc-pic to tmake_file. (mipsisa32-*-elf*, mipsisa32el-*-elf*, mipsisa32r2-*-elf*) (mipsisa32r2el-*-elf*, mipsisa64-*-elf*, mipsisa64el-*-elf*) (mipsisa64r2-*-elf*, mipsisa64r2el-*-elf*): Add mips/t-elf to tmake_file. (mipsisa64sr71k-*-elf*): Likewise. (mipsisa64sb1-*-elf*, mipsisa64sb1el-*-elf*): Likewise. (mips-*-elf*, mipsel-*-elf*): Likewise. (mips64-*-elf*, mips64el-*-elf*): Likewise. (mips64orion-*-elf*, mips64orionel-*-elf*): Likewise. (mips*-*-rtems*): Likewise. (mips64vr-*-elf*, mips64vrel-*-elf*): Add mips/t-elf, mips/t-vr to tmake_file. (pdp11-*-*): Add pdp11/t-pdp11 to tmake_file. (powerpc64-*-darwin*): Add rs6000/t-darwin64 to tmake_file. (s390x-ibm-tpf*): Add t-libgcc-pic to tmake_file. (spu-*-elf*): Likewise. (tic6x-*-uclinux): Add t-libgcc-pic to tmake_file. libquadmath: * printf/gmp-impl.h: Adapt path to longlong.h. From-SVN: r180774 |