2002-04-19 Nathanael Nerode <neroden@twcny.rr.com>
* config/mh-a68bsd: clean out dead code
* config/mh-apollo68: clean out dead code
* config/mh-cxux: clean out dead code
* config/mh-decstation: clean out dead code
* config/mh-dgux: clean out dead code
* config/mh-dgux386: clean out dead code
* config/mh-hp300: clean out dead code
* config/mh-hpux: clean out dead code
* config/mh-hpux8: clean out dead code
* config/mh-interix: clean out dead code
* config/mh-irix4: clean out dead code
* config/mh-lynxrs6k: clean out dead code
* config/mh-mingw32: clean out dead code
* config/mh-ncr3000: clean out dead code
* config/mh-ncrsvr43: clean out dead code
* config/mh-necv4: clean out dead code
* config/mh-openedition: clean out dead code
* config/mh-riscos: clean out dead code
* config/mh-sco: clean out dead code
* config/mh-sysv4: clean out dead code
* config/mh-lynxos: removed, contained only dead code
* config/mh-vaxult2: removed, contained only dead code
* config/mh-sun3: removed, contained only dead code
* configure.in: remove references to dead files
From-SVN: r52530
* configure.in: Disallow configuring libgcj when it is already
installed and we're using Solaris 2.8 linker. Do enable libgcj on
Solaris 2.8 by default. For PR libgcj/6158.
From-SVN: r52497
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
* configure.in (mcore-pe): Disable the configuration of
libstdc++-v3 since exceptions are not supported.
* config/mcore/mcore.h (CC1_SPEC): Define only if not already
defined. Do not disable exceptions or rtti.
* config/mcore/mcore-pe.h (CC1_SPEC): Define before including
mcore.h. Disable exceptions and rtti, since they are not
supported by EPOC.
From-SVN: r51326
* ltmain.sh (taglist): Initialized. Don't let `CC' tag out of it.
(relink_command): Added --tag flags.
(mode=install): If relinking fails; error out.
From-SVN: r50855
* MAINTAINERS: Add myself as maintainer for xtensa port.
Fix alphabetical order in CPU port maintainer list.
Remove myself from Write After Approval list.
From-SVN: r50662
* configure.in (*-*-netbsd*): New. Skip target-newlib,
target-libiberty, and target-libgloss. Skip Java-related
libraries if not supported for NetBSD on target CPU.
From-SVN: r49258
2002-01-17 H.J. Lu <hjl@gnu.org>
* Makefile.in (all-fastjar): Also depend on all-libiberty.
(all-target-fastjar): Also depend on all-target-libiberty.
From-SVN: r48976
2001-11-27 DJ Delorie <dj@redhat.com>
Zack Weinberg <zack@codesourcery.com>
When build != host, create libiberty for the build machine.
* Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace
CONFIG_ARGUMENTS.
(ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR):
New variables.
(ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables
and rules.
(all.normal): Depend on ALL_BUILD_MODULES.
(CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS.
(all-build-libiberty): Depend on configure-build-libiberty.
* configure: Calculate and substitute proper value for
ALL_BUILD_MODULES.
* configure.in: Create the build subdirectory.
Calculate and substitute TARGET_CONFIGARGS (formerly
CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new).
libiberty:
2001-11-27 Zack Weinberg <zack@codesourcery.com>
* _doprnt.c: Moved here from gcc/doprint.c. Adjust to build
in libiberty context. Fix typo in leading comment.
* configure.in: Fix various AC_DEFINEs so autoheader works.
If any of vprintf, vsprintf, vfprintf is missing from libc,
then AC_REPLACE_FUNCS(_doprnt).
From-SVN: r47393
