2008-03-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35632
* io/transfer.c (data_transfer_init): Fix whitespace.
(next_record_w): Truncate the file only if the stream
position is short of the file end.
From-SVN: r133454
2008-02-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35132
* io/transfer.c (next_record_w): Truncate after the last record for
STREAM I/O.
PR libfortran/34954
* io/transfer.c (data_transfer_init): Initialize dtp->rec if writing.
PR libfortran/34974
* io/transfer.c (formatted_transfer_scalar): Flush the buffer if skips
is less than zero. (next_record_w): Use sseek to position the file to
the max position reached.
From-SVN: r132512
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* io/transfer.c (next_record_w): Always move to the farthest
position when completing the record (also when we are
processing a slash edit descriptor).
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* gfortran.dg/x_slash_2.f: New test.
From-SVN: r131864
2008-01-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34876
* io/transfer.c (write_buf): Handle case of zero sized array.
(transfer_array): Set data pointer to NULL and size to zero. Then
make a data transfer and return.
From-SVN: r131848
2008-01-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (formatted_transfer_scalar): Set max_pos to the greater
of the current max_pos or the newly calculated position.
From-SVN: r131640
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* io/io.h: Adjust protoypes for open_internal(),
next_array_record() and init_loop_spec().
* io/list_read.c (next_char): Use argument "finished"
of next_array_record to check for end on internal file.
* io/unit.c: Calculate the offset for an array
internal file and supply this informatin to open_internal().
* io/unix.c (open_internal): Set the offset for the internal
file on open.
* io/transfer.c (init_loop_spec): Calculate the starting
record in case of negative strides. Return size of 0 for
an empty array.
(next_array_record): Use an extra flag to signal that the
array is finished.
(next_record_r): Use the new flag to next_array_record().
(next_record_w): Likewise.
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* gfortran.dg/internal_readwrite_1.f90: New test.
* gfortran.dg/internal_readwrite_2.f90: New test.
From-SVN: r131305
2007-12-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (read_sf): Check if readlen was less than the requested
number of bytes to read and if so, generate error.
From-SVN: r131177
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* io/io.h: Add previous_nonadvancing_write to gfc_unit.
Add prototype for finish_last_advance_record.
* io/file_pos.c (st_backspace): Generate error if backspace is
attempted for direct access or unformatted stream.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the backspace.
(st_endfile): Generate error if endfile is attempted for
direct access.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the endfile.
(st_rewind): Generate error if rewind is attempted for
direct access.
* unit.c (close_unit_1): Move functionality to write
previously written bytes to...
(finish_last_advance_record): ... here.
* transfer.c (data_transfer_init): If reading, reset
previous_nonadvancing_write.
(finalize_transfer): Set the previous_noadvancing_write
flag if we are writing and ADVANCE="no" was specified.
Only call next_record() if advance="no" wasn't specified.
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* gfortran.dg/advance_6.f90: New test case.
* gfortran.dg/direct_io_7.f90: New test case.
* gfortran.dg/streamio_13.f90: New test case.
From-SVN: r130912
2007-12-02 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (read_block, read_block_direct, write_block, write_buf):
Don't seek if file position is already there for STREAM I/O.
(finalize_transfer): For STREAM I/O don't flush unless the file position
has moved past the start position before the transfer.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r130574
2007-11-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (finalize_transfer): Do not flush for
unformatted STREAM I/O.
From-SVN: r129870
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* trans-io.c (gfc_build_io_library_fndecls): Change to use
gfc_array_index_type for array descriptor triplets instead of
gfc_int4_type_node.
libgfortran ChangeLog:
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* io/transfer.c (st_set_nml_var_dim): Use index_type instead of
GFC_INTEGER_4 for array descriptor triplets.
From-SVN: r126992
2007-07-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32752
* io/unix.c (unix_stream): Move buffer pointer adjacent to small_buffer.
* io/transfer.c (formatted_transfer_scalar): If stream I/O, set
bytes_used to zero. Fix off by one error in calculation of pos and
skips. Eliminate duplicate pending_spaces check.
From-SVN: r126652
2007-06-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32235
* io/transfer.c (st_read): Remove test for end of file condition.
(next_record_r): Add test for end of file condition.
From-SVN: r125606
2007-05-27 Janne Blomqvist <jb@gcc.gnu.org>
* runtime/string.c (compare0): Use gfc_charlen_type instead of int.
(fstrlen): Likewise.
(find_option): Likewise.
(fstrcpy): Use gfc_charlen_type instead of int, return length.
(cf_strcpy): Likewise.
* libgfortran.h: Change string prototypes to use gfc_charlen_type.
* io/open.c (new_unit): Use snprintf if available.
* io/list_read.c (nml_touch_nodes): Use memcpy instead of strcpy/strcat.
(nml_read_obj): Likewise.
* io/transfer.c (st_set_nml_var): Likewise.
* io/write.c (output_float): Use snprintf if available.
(nml_write_obj) Use memcpy instead of strcpy/strcat.
From-SVN: r125100
2007-05-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (unformatted_read): Use size from front end eliminating
use of size_from_real_kind. (unformatted_write): Ditto.
From-SVN: r125064
2007-05-06 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31201
* runtime/error.c (runtime_error_at): New function.
(generate_error): Export this function.
* gfortran.map: Add _gfortran_generate_error and
_gfortran_runtime_error_at.
* libgfortran.h: Add comment to reference error codes in front end.
(library_start): Locate prototype with library_end macro and add
a new comment. Add prototype for runtime_error_at. Export prototype for
generate_error.
* io/lock.c (library_start): Fix check for error condition.
* io/transfer.c (data_transfer_init): Add library check.
From-SVN: r124479
PR libfortran/31210
* io/transfer.c (transfer_character): Avoid passing a NULL
pointer as source to the transfer routines, if the string length
is zero.
From-SVN: r124428
2007-04-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31501
* io/list_read.c (next_char): Fix whitespace.
* io/io.h: Remove prototypes and define macros for is_array_io,
is_stream_io, and is_internal_unit.
* io/unit.c (is_array_io), (is_internal_unit), (is_stream_io): Delete
these functions.
* io/transfer.c (read_sf): Change handling of internal_unit to make a
single call to salloc_r and use memcpy to transfer the data.
From-SVN: r124266
2007-04-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31532
* io/file_pos.c (st_backspace): Set flags.position for end of file
condition and use new function update_position.
(st_endfile): Use new function update_position.
* io/io.h: Add prototype for new function.
* io/inquire.c (inquire_via_unit): If not direct access, set NEXTREC
to zero.
* io/unit.c (update_position): New function to update position info
used by inquire.
* io/transfer.c (next_record): Fix typo and use new function.
From-SVN: r124252
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* io/transfer.c (read_block_direct): Instead of calling us_read,
set dtp->u.p.current_unit->current_record = 0 so that pre_position
will read the record marker.
(data_transfer_init): For different error conditions, call
generate_error, then return.
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* gfortran.dg/backspace_8.f: New test case.
From-SVN: r124079
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/open.c (test_endfile): Delete this function.
(edit_modes): Delete call to test_endfile.
(new_unit): Likewise.
* io/io.h: Delete prototype for test_endfile.
* io/transfer.c (next_record_r): Remove use of test_endfile.
(st_read): Add test for end file condition and adjust status.
From-SVN: r123403
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31366
* io/transfer.c (read_block_direct): Do not generate error when reading
past EOF on a short record that is less than the RECL= specified.
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31207
* io/unit.c (close_unit_1): If there are bytes previously written from
ADVANCE="no", move to the end before closing.
From-SVN: r123401
2007-03-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/transfer.c (next_record_r): Do not call test_endfile if in namelist
mode.
From-SVN: r123284
2007-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31199
*io/io.h: Add saved_pos to gfc_unit structure.
*io/open.c (new_unit): Initialize saved_pos.
*io/transfer.c (data_transfer_init): Set max_pos to value in saved_pos.
(next_record_w): Fix whitespace.
(finalze_transfer): Calculate max_pos for ADVANCE="no" and save it for
later use. If not ADVANCE="no" set saved_pos to zero.
From-SVN: r123205
2007-03-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/file_position (st_rewind): Fix comments. Remove use of
test_endfile. Don't seek if already at 0 position. Use new is_special
function to set endfile state.
* io/open.c (test_endfile): Delete this function.
* io/io.h: Delete prototype for test_endfile. Add prototype
for is_special.
* io/unix.c (is_special): New function. Fix whitespace.
* io/transfer.c (next_record_r): Remove use of test_endfile.
From-SVN: r123038
2007-03-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31051
* io/transfer.c (formatted_transfer_scalar): Adjust position for pending
spaces when in writing mode. Clean up some formatting.
From-SVN: r122940
2007-03-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31099
* io/open.c (new_unit): Initialize bytes_left and recl_subrecord.
* io/transfer.c (next_record_w): Set bytes left to record length for
sequential unformatted I/O.
(next_record_r): Ditto.
(read_block_direct): Fix test for exceeding bytes_left.
From-SVN: r122763
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* trans-expr.c (gfc_conv_aliased_arg): Remove static attribute
from function and make sure that substring lengths are
translated.
(is_aliased_array): Remove static attribute.
* trans.c : Add prototypes for gfc_conv_aliased_arg and
is_aliased_array.
* trans-io.c (set_internal_unit): Add the post block to the
arguments of the function. Use is_aliased_array to check if
temporary is needed; if so call gfc_conv_aliased_arg.
(build_dt): Pass the post block to set_internal_unit and
add to the block after all io activiy is done.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* io/transfer.c (init_loop_spec, next_array_record): Change to
lbound rather than unity base.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
* gfortran.dg/arrayio_11.f90.f90: New test.
PR fortran/30626
* gfortran.dg/arrayio_12.f90.f90: New test.
From-SVN: r121500
2006-12-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30014
*io/io.h (st_parameter_dt): Change *size and *iolength type to
GFC_IO_INT.
*io/transfer.c (finalize_transfer): Cast dtp->u.p.size_used to
GFC_IO_INT. (iolength_transfer): Cast size * nelems to GFC_IO_INT.
From-SVN: r120234
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* gfortran.dg/read_eof_4.f90: Add tests.
* gfortran.dg/readwrite_unf_direct_eor_1.f90: New test.
* gfortran.dg/unf_read_corrupted_1.f90: New test.
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* libgfortran.h: Add ERROR_CORRUPT_FILE to error_codes.
* runtime/error.c (translate_error): Add handling for
ERROR_CORRUPT_FILE.
* io/transfer.c (read_block_direct): Add comment about
EOR for stream files.
Remove test for no bytes left for direct access files.
Generate an ERROR_SHORT_RECORD if the read was short.
For unformatted sequential files: Check endfile condition.
Remove test for no bytes left. End of file here means
that the file structure has been corrupted. Pre-position
the file for the next record in case of error.
(write_buf): Whitespace fix. Subtract the number of bytes
written from bytes_left.
From-SVN: r119592
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.dg/convert_implied_open.f90: Change to
new default record length.
* gfortran.dg/unf_short_record_1.f90: Adapt to
new error message.
* gfortran.dg/unformatted_subrecords_1.f90: New test.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.h (gfc_option_t): Add max_subrecord_length.
(top level): Define MAX_SUBRECORD_LENGTH.
* lang.opt: Add option -fmax-subrecord-length=.
* trans-decl.c: Add new function set_max_subrecord_length.
(gfc_generate_function_code): If we are within the main
program and max_subrecord_length has been set, call
set_max_subrecord_length.
* options.c (gfc_init_options): Add defaults for
max_subrecord_lenght, convert and record_marker.
(gfc_handle_option): Add handling for
-fmax_subrecord_length.
* invoke.texi: Document the new default for
-frecord-marker=<n>.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* libgfortran/libgfortran.h (compile_options_t): Add
record_marker. (top level): Define GFC_MAX_SUBRECORD_LENGTH.
* runtime/compile_options.c (set_record_marker): Change
default to four-byte record marker.
(set_max_subrecord_length): New function.
* runtime/error.c (translate_error): Change error message
for short record on unformatted read.
* io/io.h (gfc_unit): Add recl_subrecord, bytes_left_subrecord
and continued.
* io/file_pos.c (unformatted_backspace): Change default of record
marker size to four bytes. Loop over subrecords.
* io/open.c: Default recl is max_offset. If
compile_options.max_subrecord_length has been set, set set
u->recl_subrecord to its value, to the maximum value otherwise.
* io/transfer.c (top level): Add prototypes for us_read, us_write,
next_record_r_unf and next_record_w_unf.
(read_block_direct): Separate codepaths for unformatted direct
and unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(write_buf): Separate codepaths for unformatted direct and
unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(us_read): Add parameter continued (to indicate that bytes_left
should not be intialized). Change default of record marker size
to four bytes. Use subrecord. If the subrecord length is smaller than
zero, this indicates a continuation.
(us_write): Add parameter continued (to indicate that the continued
flag should be set). Use subrecord.
(pre_position): Use 0 for continued on us_write and us_read calls.
(skip_record): New function.
(next_record_r_unf): New function.
(next_record_r): Use next_record_r_unf.
(write_us_marker): Default size for record markers is four bytes.
(next_record_w_unf): New function.
(next_record_w): Use next_record_w_unf.
From-SVN: r119412
2006-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/io.h (unit_flags): Add new flag has_recl.
* io.open.c (new_unit): Set flag if RECL= was specified.
* io/transfer.c (us_write): If flag set, leave recl as initialized by
new_unit.
From-SVN: r119087
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* libgfortran.h: Add ERROR_SHORT_RECORD
* runtime/error.c (translate_error): Add case
for ERROR_SHORT_RECORD.
* io/transfer.c (read_block_direct): Separate codepaths
for stream and record unformatted I/O. Remove unneeded
tests for standard input, padding and formatted I/O.
If the record is short, read in as much data as possible,
then raise the error.
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* gfortran.dg/unf_short_record_1.f90: New test.
From-SVN: r118341
2006-10-28 Tobias Burnus <burnus@net-b.de>
PR fortran/29625
* io/transfer.c (formatted_transfer_scalar): Allow binary edit
descriptors for real variables; give error for BOZ edit
descriptor for non-integers when using -std=f*.
From-SVN: r118111
2006-10-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29277
* io/list_read.c (next_char): Update strm_pos.
(eat_separator): Delete extra call to unget_char.
* io/transfer.c (read_block): Use read_sf for formatted stream I/O.
(next_record_r): Update strm_pos for formatted stream I/O and handle
end-of-record correctly.
(next_record_w): Ditto.
(next_record): Enable next record (r/w) functions and update strm_pos.
(finalize_transfer): Call next_record to finish the record.
From-SVN: r117846
2006-08-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25828
* libgfortran.h: Rename GFC_LARGE_IO_INT to GFC_IO_INT.
* io/file_pos.c (st_backspace): Ignore if access=STREAM.
(st_rewind): Handle case of access=STREAM.
* io/open.c (access_opt): Add STREAM_ACCESS.
(edit_modes): Set current_record to zero only if not STREAM.
(new_unit): Initialize maxrec, recl, and last_record for STREAM.
* io/read.c (read_x): Advance file position for STREAM.
* io/io.h (enum unit_access): Align IOPARM flags with frontend.
Add ACCESS_STREAM. Add prototype for is_stream_io () function.
Use GFC_IO_INT.
* io/inquire.c (inquire_via_unit): Add text for access = "STREAM".
* io/unit.c (is_stream_io): New function to return true if access =
STREAM.
* io/transfer.c (file_mode): Add modes for unformatted stream and
formatted stream. (current_mode): Return appropriate file mode based
on access flags.
(read_block): Handle formatted stream reads.
(read_block_direct): Handle unformatted stream reads.
(write_block): Handle formatted stream writes.
(write_buf): Handle unformatted stream writes.
(unformatted_read): Fix up, use temporary for size.
(pre_position): Position file for STREAM access.
(data_transfer_init): Initialize for stream access, skip irrelevent
error checks.
(next_record_r),(next_record_w), and (next_record): Do nothing for
stream I/O.
(finalize_transfer): Flush when all done if stream I/O.
From-SVN: r116172