2017-12-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Dominique d'Humieres <dominiq@lps.ens.fr>
PR libgfortran/83191
* io/transfer.c (list_formatted_read_scalar): Do not set
namelist_mode bit here. (namelist_read): Likewise.
(data_transfer_init): Clear the mode bit here.
(finalize_transfer): Do set the mode bit just before any calls
to namelist_read or namelist_write. It can now be referred to
in complex_write.
^ io/write.c (write_complex): Suppress the leading blanks when
namelist_mode bit is not set to 1.
* gfortran.dg/namelist_95.f90: New test.
Co-Authored-By: Dominique d'Humieres <dominiq@lps.ens.fr>
From-SVN: r255365
2017-12-02 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/83225
* io/io.h (is_internal_unit): Use the unit_is_internal bit.
* io/transfer.c (data_transfer_init): Set the bit to true for
internal umits. Use that bit for checks for internal unit
initializations.
* io/unit.c (insert_unit): As a precaution, set the
internal_unit_kind to zero when a unit structure is first created.
From-SVN: r255362
2017-11-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/83168
* io/write.c (select_string): Bump size by one to avoid
overrun.
From-SVN: r255225
The current F2018 draft (N2137) specifies behavior of the RECL=
specifier in the INQUIRE statement, where it previously was left as
undefined. Namely:
- If the unit is not connected, RECL= should be given the value -1.
- If the unit is connected with stream access, RECL= should be given
the value -2.
Further, as PR 53796 describes, the handling of RECL= is poor in other
ways as well. When the recl is set to the maximum possible
(GFC_INTEGER_8_HUGE / LLONG_MAX), which it does by default except for
preconnected units, and when INQUIRE(RECL=) is used with a 4 byte
integer, the value is truncated and the 4 byte value is thus
-1. Fixing this to generate an error is a lot of work, as currently
the truncation is done by the frontend, the library sees only an 8
byte value with no indication that the frontend is going to copy it to
a 4 byte one. Instead, this patch does a bit twiddling trick such that
the truncated 4 byte value is GFC_INTEGER_4_HUGE while still being
0.99999999 * GFC_INTEGER_8_HUGE which is large enough for all
practical purposes.
Finally, the patch removes GFORTRAN_DEFAULT_RECL which was used only
for preconnected units, and instead uses the same approach as describe
above.
Regtested on x86_64-pc-linux-gnu, Ok for trunk.
gcc/fortran/ChangeLog:
2017-11-28 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/53796
* gfortran.texi: Remove mentions of GFORTRAN_DEFAULT_RECL.
libgfortran/ChangeLog:
2017-11-28 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/53796
* io/inquire.c (inquire_via_unit): Set recl to -1 for unconnected
units.
* io/io.h (default_recl): New variable.
* io/open.c (new_unit): Set recl to default_recl for sequential,
-2 for stream access.
* io/transfer.c (read_block_form): Test against default_recl
instead of DEFAULT_RECL.
(write_block): Likewise.
* io/unit.c (init_units): Calculate max_offset, default_recl.
* libgfortran.h (DEFAULT_RECL): Remove.
* runtime/environ.c: Remove GFORTRAN_DEFAULT_RECL.
gcc/testsuite/ChangeLog:
2017-11-28 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/53796
* gfortran.dg/inquire_recl_f2018.f90: New test.
From-SVN: r255215
Now that the ABI supports large record lengths, there's a few places
in libgfortran where we need to use larger types. For internal units
which by definition are in-memory, it's enought to use ptrdiff_t, for
external units gfc_offset.
Regtested on x86_64-pc-linux-gnu?
libgfortran/ChangeLog:
2017-11-19 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* io/transfer.c (skip_record): Use gfc_offset to handle large
records.
(next_record_r): Likewise.
(sset): Likewise.
(next_record_w): Use gfc_offset/ptrdiff_t appropriately.
From-SVN: r254918
This is a straightforward change that we can do now that the ABI has
been bumped (again!).
Regtested on x86_64-pc-linux-gnu.
gcc/fortran/ChangeLog:
2017-11-18 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* ioparm.def (IOPARM): Make recl_in intio, and recl_out pintio.
libgfortran/ChangeLog:
2017-11-18 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* io/io.h: Make recl_in a GC_IO_INT and recl_out a type
GFC_IO_INT*.
gcc/testsuite/ChangeLog:
2017-11-18 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/44292
* gfortran.dg/large_recl.f90: New test.
From-SVN: r254915
2017-10-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Rimvydas (RJ)
PR libgfortran/81938
io/format.c (free_format_data): Don't try to free vlist
descriptors past the end of the fnode array.
From-SVN: r254163
2017-05-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/53029
* list_read.c (list_formatted_read_scala): Set the err return
value to the common.flags error values.
* gfortran.dg/read_5.f90: New test.
From-SVN: r248577
2017-05-19 Paul Thomas <pault@gcc.gnu.org>
PR fortran/80333
* trans-io.c (nml_get_addr_expr): If we are dealing with class
type data set tmp tree to get that address.
(transfer_namelist_element): Set the array spec to point to the
the class data.
2017-05-19 Paul Thomas <pault@gcc.gnu.org>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/80333
* list_read.c (nml_read_obj): Compute pointer into class/type
arrays from the nl->dim information. Update it for each iteration
of the loop for the given object.
2017-05-19 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/80333
* gfortran.dg/dtio_30.f03: New test.
From-SVN: r248293
2017-05-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/80727
* transfer.c (read_sf_internal): Remove bogus code to detect EOR.
(read_block_form): For internal units, generate EOR if no more
bytes left in unit and we are trying to read with ADVANCE='NO'.
* gfortran.dg/read_3.f90: New test.
From-SVN: r248080
2017-03-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/78670
* io/list_read.c (nml_get_obj_data): Delete code which calls the
child read procedure. (nml_read_obj): Insert the code which
calls the child procedure. Don't need to touch nodes if using
dtio since parent will not be traversing the components.
PR libgfortran/78670
* gfortran.dg/dtio_25.f90: Use 'a1' format when trying to read
a character of length 1. Update test for success.
* gfortran.dg/dtio_28.f03: New test.
* gfortran.dg/dtio_4.f90: Update to open test file with status =
'scratch' to delete the file when done.
From-SVN: r246576
2017-03-28 Janus Weil <janus@gcc.gnu.org>
PR fortran/78661
* trans-io.c (transfer_namelist_element): Perform a polymorphic call
to a DTIO procedure if necessary.
2017-03-28 Janus Weil <janus@gcc.gnu.org>
PR fortran/78661
* gfortran.dg/dtio_25.f90: Modified test case.
* gfortran.dg/dtio_27.f90: New test case.
2017-03-28 Janus Weil <janus@gcc.gnu.org>
PR fortran/78661
* io/write.c (nml_write_obj): Build a class container only if necessary.
From-SVN: r246546
2017-03-27 Dominique d'Humieres <dominiq@lps.ens.fr>
* io/list_read.c: Insert /* Fall through. */ in the macro
CASE_SEPARATORS in order to silence warnings.
From-SVN: r246507
2017-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/78881
* io/io.h (st_parameter_dt): Rename unused component last_char to
child_saved_iostat. Move comment to gfc_unit.
* io/list_read.c (list_formatted_read_scalar): After call to
child READ procedure, save the returned iostat value for later
check. (finish_list_read): Only finish READ if child_saved_iostat
was OK.
* io/transfer.c (read_sf_internal): If there is a saved character
in last character, seek back one. Add a new check for EOR
condition. (read_sf): If there is a saved character
in last character, seek back one. (formatted_transfer_scalar_read):
Initialize last character before invoking child procedure.
(data_transfer_init): If child dtio, set advance
status to nonadvancing. Move update of size and check for EOR
condition to before child dtio return.
* gfortran.dg/dtio_26.f90: New test.
From-SVN: r246478
2017-03-11 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/78854
* io/list_read.c (nml_get_obj_data): Stash internal unit for
later use by child procedures.
* io/write.c (nml_write_obj): Likewise.
* io/tranfer.c (data_transfer_init): Minor whitespace.
* io/unit.c (set_internal_uit): Look for the stashed internal
unit and use it if found.
* gfortran.dg/dtio_25.f90: New test.
From-SVN: r246070
2017-02-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/79382
* decl.c (access_attr_decl): Test for presence of generic DTIO
interface and emit error if not present.
2017-02-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/79382
* io/transfer.c (check_dtio_proc): New function.
(formatted_transfer_scalar_read): Use it.
(formatted_transfer_scalar_write): ditto.
2017-02-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/79382
* gfortran.dg/dtio_10.f90 : Change test of error message.
* gfortran.dg/dtio_23.f90 : New test.
* gfortran.dg/dtio_24.f90 : New test.
From-SVN: r245596
In order to handle large character lengths on (L)LP64 targets, switch
the GFortran character length from an int to a size_t.
This is an ABI change, as procedures with character arguments take
hidden arguments with the character length.
I also changed the _size member in vtables from int to size_t, as
there were some cases where character lengths and sizes were
apparently mixed up and caused regressions otherwise. Although I
haven't tested, this might enable very large derived types as well.
Also, as there are some places in the frontend were negative character
lengths are used as special flag values, in the frontend the character
length is handled as a signed variable of the same size as a size_t,
although in the runtime library it really is size_t.
I haven't changed the character length variables for the co-array
intrinsics, as this is something that may need to be synchronized with
OpenCoarrays.
This is v4 of the patch. v3 was applied but had to reverted due to
breaking bootstrap. The fix is in resolve.c:resolve_charlen, where
it's necessary to check that an expression is constant before using
mpz_sgn.
Overview of v3 of the patch: All the issues pointed out by FX's review
of v2 have been fixed. In particular, there are now new functions
gfc_mpz_get_hwi and gfc_mpz_set_hwi, similar to the GMP functions
mpz_get_si and mpz_set_si, except that they get/set a HOST_WIDE_INT
instead of a long value. Similarly, gfc_get_int_expr now takes a
HOST_WIDE_INT instead of a long, gfc_extract_long is replaced by
gfc_extract_hwi. Also, the preliminary work to handle
gfc_charlen_type_node being unsigned has been removed.
Regtested on x86_64-pc-linux-gnu and i686-pc-linux-gnu.
frontend:
2017-01-13 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* class.c (gfc_find_derived_vtab): Use gfc_size_kind instead of
hardcoded kind.
(find_intrinsic_vtab): Likewise.
* expr.c (gfc_get_character_expr): Length parameter of type
gfc_charlen_t.
(gfc_get_int_expr): Value argument of type HOST_WIDE_INT.
(gfc_extract_hwi): New function.
(simplify_const_ref): Make string_len of type gfc_charlen_t.
(gfc_simplify_expr): Use HOST_WIDE_INT for substring refs.
* gfortran.h (gfc_mpz_get_hwi): New prototype.
(gfc_mpz_set_hwi): Likewise.
(gfc_charlen_t): New typedef.
(gfc_expr): Use gfc_charlen_t for character lengths.
(gfc_size_kind): New extern variable.
(gfc_extract_hwi): New prototype.
(gfc_get_character_expr): Use gfc_charlen_t for character length.
(gfc_get_int_expr): Use HOST_WIDE_INT type for value argument.
* iresolve.c (gfc_resolve_repeat): Pass string length directly without
temporary, use gfc_charlen_int_kind.
* match.c (select_intrinsic_set_tmp): Use HOST_WIDE_INT for charlen.
* misc.c (gfc_mpz_get_hwi): New function.
(gfc_mpz_set_hwi): New function.
* module.c (atom_int): Change type from int to HOST_WIDE_INT.
(parse_integer): Don't complain about large integers.
(write_atom): Use HOST_WIDE_INT for integers.
(mio_integer): Handle integer type mismatch.
(mio_hwi): New function.
(mio_intrinsic_op): Use HOST_WIDE_INT.
(mio_array_ref): Likewise.
(mio_expr): Likewise.
* resolve.c (resolve_select_type): Use HOST_WIDE_INT for charlen,
use snprintf.
(resolve_substring_charlen): Use gfc_charlen_int_kind.
(resolve_charlen): Use mpz_sgn to determine sign.
* simplify.c (gfc_simplify_repeat): Use HOST_WIDE_INT/gfc_charlen_t
instead of long.
* target-memory.c (size_character): Length argument of type
gfc_charlen_t.
(gfc_encode_character): Likewise.
(gfc_interpret_character): Use gfc_charlen_t.
* target-memory.h (gfc_encode_character): Modify prototype.
* trans-array.c (get_array_ctor_var_strlen): Use
gfc_conv_mpz_to_tree_type.
* trans-const.c (gfc_conv_mpz_to_tree_type): New function.
* trans-const.h (gfc_conv_mpz_to_tree_type): New prototype.
* trans-expr.c (gfc_class_len_or_zero_get): Build const of type
gfc_charlen_type_node.
(gfc_conv_intrinsic_to_class): Use gfc_charlen_int_kind instead of
4, fold_convert to correct type.
(gfc_conv_class_to_class): Build const of type size_type_node for
size.
(gfc_copy_class_to_class): Likewise.
(gfc_conv_string_length): Use same type in expression.
(gfc_conv_substring): Likewise, use HOST_WIDE_INT for charlen.
(gfc_conv_string_tmp): Make sure len is of the right type.
(gfc_conv_concat_op): Use same type in expression.
(gfc_conv_procedure_call): Likewise.
(alloc_scalar_allocatable_for_subcomponent_assignment):
fold_convert to right type.
(gfc_trans_subcomponent_assign): Likewise.
(trans_class_vptr_len_assignment): Build const of correct type.
(gfc_trans_pointer_assignment): Likewise.
(alloc_scalar_allocatable_for_assignment): fold_convert to right
type in expr.
(trans_class_assignment): Build const of correct type.
* trans-intrinsic.c (gfc_conv_associated): Likewise.
(gfc_conv_intrinsic_repeat): Do calculation in sizetype.
* trans-io.c (gfc_build_io_library_fndecls): Use
gfc_charlen_type_node for character lengths.
* trans-stmt.c (gfc_trans_label_assign): Build const of
gfc_charlen_type_node.
(gfc_trans_character_select): Likewise.
(gfc_trans_allocate): Likewise, don't typecast strlen result.
(gfc_trans_deallocate): Don't typecast strlen result.
* trans-types.c (gfc_size_kind): New variable.
(gfc_init_types): Determine gfc_charlen_int_kind and gfc_size_kind
from size_type_node.
testsuite:
2017-01-13 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* gfortran.dg/repeat_4.f90: Use integers of kind C_SIZE_T.
* gfortran.dg/repeat_7.f90: New test for PR 66310.
* gfortran.dg/scan_2.f90: Handle potential cast in assignment.
* gfortran.dg/string_1.f90: Limit to ilp32 targets.
* gfortran.dg/string_1_lp64.f90: New test.
* gfortran.dg/string_3.f90: Limit to ilp32 targets.
* gfortran.dg/string_3_lp64.f90: New test.
libgfortran:
2017-01-13 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
* intrinsics/args.c (getarg_i4): Use gfc_charlen_type.
(get_command_argument_i4): Likewise.
(get_command_i4): Likewise.
* intrinsics/chmod.c (chmod_internal): Likewise.
* intrinsics/env.c (get_environment_variable_i4): Likewise.
* intrinsics/extends_type_of.c (struct vtype): Use size_t for size
member.
* intrinsics/gerror.c (gerror): Use gfc_charlen_type.
* intrinsics/getlog.c (getlog): Likewise.
* intrinsics/hostnm.c (hostnm_0): Likewise.
* intrinsics/string_intrinsics_inc.c (string_len_trim): Rework to
work if gfc_charlen_type is unsigned.
(string_scan): Likewise.
* io/transfer.c (transfer_character): Modify prototype.
(transfer_character_write): Likewise.
(transfer_character_wide): Likewise.
(transfer_character_wide_write): Likewise.
(transfer_array): Typecast to avoid signed-unsigned comparison.
* io/unit.c (is_trim_ok): Use gfc_charlen_type.
* io/write.c (namelist_write): Likewise.
* libgfortran.h (gfc_charlen_type): Change typedef to size_t.
From-SVN: r244448
In order to handle large character lengths on (L)LP64 targets, switch
the GFortran character length from an int to a size_t.
This is an ABI change, as procedures with character arguments take
hidden arguments with the character length.
I also changed the _size member in vtables from int to size_t, as
there were some cases where character lengths and sizes were
apparently mixed up and caused regressions otherwise. Although I
haven't tested, this might enable very large derived types as well.
Also, as there are some places in the frontend were negative character
lengths are used as special flag values, in the frontend the character
length is handled as a signed variable of the same size as a size_t,
although in the runtime library it really is size_t.
I haven't changed the character length variables for the co-array
intrinsics, as this is something that may need to be synchronized with
OpenCoarrays.
This is v3 of the patch. All the issues pointed out by FX's review of
v2 have been fixed. In particular, there are now new functions
gfc_mpz_get_hwi and gfc_mpz_set_hwi, similar to the GMP functions
mpz_get_si and mpz_set_si, except that they get/set a HOST_WIDE_INT
instead of a long value. Similarly, gfc_get_int_expr now takes a
HOST_WIDE_INT instead of a long, gfc_extract_long is replaced by
gfc_extract_hwi. Also, the preliminary work to handle
gfc_charlen_type_node being unsigned has been removed.
Regtested on x86_64-pc-linux-gnu.
frontend:
2017-01-03 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* class.c (gfc_find_derived_vtab): Use gfc_size_kind instead of
hardcoded kind.
(find_intrinsic_vtab): Likewise.
* expr.c (gfc_get_character_expr): Length parameter of type
gfc_charlen_t.
(gfc_get_int_expr): Value argument of type HOST_WIDE_INT.
(gfc_extract_hwi): New function.
(simplify_const_ref): Make string_len of type gfc_charlen_t.
(gfc_simplify_expr): Use HOST_WIDE_INT for substring refs.
* gfortran.h (gfc_mpz_get_hwi): New prototype.
(gfc_mpz_set_hwi): Likewise.
(gfc_charlen_t): New typedef.
(gfc_expr): Use gfc_charlen_t for character lengths.
(gfc_size_kind): New extern variable.
(gfc_extract_hwi): New prototype.
(gfc_get_character_expr): Use gfc_charlen_t for character length.
(gfc_get_int_expr): Use HOST_WIDE_INT type for value argument.
* iresolve.c (gfc_resolve_repeat): Pass string length directly without
temporary, use gfc_charlen_int_kind.
* match.c (select_intrinsic_set_tmp): Use HOST_WIDE_INT for charlen.
* misc.c (gfc_mpz_get_hwi): New function.
(gfc_mpz_set_hwi): New function.
* module.c (atom_int): Change type from int to HOST_WIDE_INT.
(parse_integer): Don't complain about large integers.
(write_atom): Use HOST_WIDE_INT for integers.
(mio_integer): Handle integer type mismatch.
(mio_hwi): New function.
(mio_intrinsic_op): Use HOST_WIDE_INT.
(mio_array_ref): Likewise.
(mio_expr): Likewise.
* resolve.c (resolve_select_type): Use HOST_WIDE_INT for charlen,
use snprintf.
(resolve_charlen): Use mpz_sgn to determine sign.
* simplify.c (gfc_simplify_repeat): Use HOST_WIDE_INT/gfc_charlen_t
instead of long.
* target-memory.c (size_character): Length argument of type
gfc_charlen_t.
(gfc_encode_character): Likewise.
(gfc_interpret_character): Use gfc_charlen_t.
* target-memory.h (gfc_encode_character): Modify prototype.
* trans-array.c (get_array_ctor_var_strlen): Use
gfc_conv_mpz_to_tree_type.
* trans-const.c (gfc_conv_mpz_to_tree_type): New function.
* trans-const.h (gfc_conv_mpz_to_tree_type): New prototype.
* trans-expr.c (gfc_class_len_or_zero_get): Build const of type
gfc_charlen_type_node.
(gfc_conv_intrinsic_to_class): Use gfc_charlen_int_kind instead of
4, fold_convert to correct type.
(gfc_conv_class_to_class): Build const of type size_type_node for
size.
(gfc_copy_class_to_class): Likewise.
(gfc_conv_string_length): Use same type in expression.
(gfc_conv_substring): Likewise, use HOST_WIDE_INT for charlen.
(gfc_conv_string_tmp): Make sure len is of the right type.
(gfc_conv_concat_op): Use same type in expression.
(gfc_conv_procedure_call): Likewise.
(alloc_scalar_allocatable_for_subcomponent_assignment):
fold_convert to right type.
(gfc_trans_subcomponent_assign): Likewise.
(trans_class_vptr_len_assignment): Build const of correct type.
(gfc_trans_pointer_assignment): Likewise.
(alloc_scalar_allocatable_for_assignment): fold_convert to right
type in expr.
(trans_class_assignment): Build const of correct type.
* trans-intrinsic.c (gfc_conv_associated): Likewise.
(gfc_conv_intrinsic_repeat): Do calculation in sizetype.
* trans-io.c (gfc_build_io_library_fndecls): Use
gfc_charlen_type_node for character lengths.
* trans-stmt.c (gfc_trans_label_assign): Build const of
gfc_charlen_type_node.
(gfc_trans_character_select): Likewise.
(gfc_trans_allocate): Likewise, don't typecast strlen result.
(gfc_trans_deallocate): Don't typecast strlen result.
* trans-types.c (gfc_size_kind): New variable.
(gfc_init_types): Determine gfc_charlen_int_kind and gfc_size_kind
from size_type_node.
testsuite:
2017-01-03 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/66310
* gfortran.dg/dependency_49.f90: Change scan-tree-dump-times
due to gfc_trans_string_copy change to avoid
-Wstringop-overflow.
* gfortran.dg/repeat_4.f90: Use integers of kind C_SIZE_T.
* gfortran.dg/repeat_7.f90: New test for PR 66310.
* gfortran.dg/scan_2.f90: Handle potential cast in assignment.
* gfortran.dg/string_1.f90: Limit to ilp32 targets.
* gfortran.dg/string_1_lp64.f90: New test.
* gfortran.dg/string_3.f90: Limit to ilp32 targets.
* gfortran.dg/string_3_lp64.f90: New test.
* gfortran.dg/transfer_intrinsic_1.f90: Change
scan-tree-dump-times due to gfc_trans_string_copy change to
avoid -Wstringop-overflow.
libgfortran:
2017-01-03 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
* intrinsics/args.c (getarg_i4): Use gfc_charlen_type.
(get_command_argument_i4): Likewise.
(get_command_i4): Likewise.
* intrinsics/chmod.c (chmod_internal): Likewise.
* intrinsics/env.c (get_environment_variable_i4): Likewise.
* intrinsics/extends_type_of.c (struct vtype): Use size_t for size
member.
* intrinsics/gerror.c (gerror): Use gfc_charlen_type.
* intrinsics/getlog.c (getlog): Likewise.
* intrinsics/hostnm.c (hostnm_0): Likewise.
* intrinsics/string_intrinsics_inc.c (string_len_trim): Rework to
work if gfc_charlen_type is unsigned.
(string_scan): Likewise.
* io/transfer.c (transfer_character): Modify prototype.
(transfer_character_write): Likewise.
(transfer_character_wide): Likewise.
(transfer_character_wide_write): Likewise.
(transfer_array): Typecast to avoid signed-unsigned comparison.
* io/unit.c (is_trim_ok): Use gfc_charlen_type.
* io/write.c (namelist_write): Likewise.
* libgfortran.h (gfc_charlen_type): Change typedef to size_t.
From-SVN: r244011
2016-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/78622
* io.c (format_lex): Continue of string delimiter seen.
* io/transfer.c (get_dt_format): New static function to alloc
and set the DT iotype string, handling doubled quotes.
(formatted_transfer_scalar_read,
formatted_transfer_scalar_write): Use new function.
* gfortran.dg/dtio_20.f03: New test.
From-SVN: r243765
2016-10-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/54679
* io.c (check_format): Adjust checks for FMT_L to treat a zero
width as an extension, giving warnings or error as appropriate.
Improve messages.
PR libgfortran/54679
* io/format.c (parse_format_list): Adjust checks for FMT_L to
treat a zero width as an extension, giving warnings or error
as appropriate. Improve messages.
PR fortran/54679
* gfortran.dg/fmt_l.f90: Update test.
* gfortran.dg/fmt_l0.f90: New test.
From-SVN: r241720
2016-10-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/78123
* io/transfer.c (formatted_transfer_scalar_read): Clear seen_eor
only if we have tabbed to left of current position.
* gfortran.dg/fmt_t_9.f: New test.
From-SVN: r241691
2016-10-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/77828
* io/io.h (st_parameter_dt): Reorder for readability and sanity.
* io/transfer.c (data_transfer_init): Remove TODO and enable the
runtime error message, rec= specifier not allowed in STREAM
access.
* libtool-version: Bump major version of libgfortran to 4.
* ioparm.def: Reorder dt parameters to match libgfortran.
* libgfortran.h: Swap definitions of GFC_INTERNAL_UNIT and
GFC_INTERNAL_UNIT4.
From-SVN: r241497
2016-10-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (finalize_transfer): Free format data in child
procedures. (st_read_done, st_write_done): Don't free format
hash table.
From-SVN: r241392
2016-10-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* io/io.h: Move size_used from dtp to unit structure. Add bool
has_size to unit structure.
* read.c (read_x): Use has_size and size_used.
* transfer.c (read_sf_internal,read_sf,read_block_form,
read_block_form4): Likewise.
(data_transfer_init): If parent, initialize the size variables.
(finalize_transfer): Set the size variable using size_used in
gfc_unit. (write_block): Delete bogus/dead code.
* gfortran.dg/dtio_17.f90: New test.
From-SVN: r241294
Improve error message, and remove a redundant check, as the same check is
done a bit earlier due to the PR 48587 patch.
2016-10-16 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/48587
* io/transfer.c (data_transfer_init): Improve error message,
remove redundant check.
Regtested on x86_64-pc-linux-gnu.
From-SVN: r241211
Currently GFortran newer reuses unit numbers allocated with NEWUNIT=,
instead having a simple counter that is decremented each time such a
unit is opened. For a long running program which repeatedly opens
files with NEWUNIT= and closes them, the counter can wrap around and
cause an abort. This patch replaces the counter with an allocator
that keeps track of which units numbers are allocated, and can reuse
them once they have been deallocated. Since operating systems tend to
limit the number of simultaneous open files for a process to a
relatively modest number, a relatively simple approach with a linear
scan through an array suffices. Though as a small optimization there
is a low water indicator keeping track of the index for which all unit
numbers below are already allocated. This linear scan also ensures
that we always allocate the smallest available unit number.
2016-10-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/48587
* io/io.h (get_unique_unit_number): Remove prototype.
(newunit_alloc): New prototype.
* io/open.c (st_open): Call newunit_alloc.
* io/unit.c (newunits,newunit_size,newunit_lwi): New static
variables.
(GFC_FIRST_NEWUNIT): Rename to NEWUNIT_START.
(next_available_newunit): Remove variable.
(get_unit): Call newunit_alloc, don't try to create negative
external unit.
(close_unit_1): Call newunit_free.
(close_units): Free newunits array.
(get_unique_number): Remove function.
(newunit_alloc): New function.
(newunit_free): New function.
* io/transfer.c (data_transfer_init): Check for invalid unit
number.
testsuite ChangeLog:
2016-10-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/48587
* gfortran.dg/negative_unit2.f90: New testcase.
From-SVN: r241199
Many POSIX systems have the bad habit of not restarting interrupted
syscalls. On these systems it's up to the user to check for an error
with errno == EINTR and restart manually. This patch does this for
libgfortran, so that GFortran users don't have to do it.
2016-10-09 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/67585
* io/io.h: TEMP_FAILURE_RETRY: Define macro if not found.
* io/unix.c (raw_read): Handle EINTR.
(raw_write): Check for return value -1.
(raw_seek): Handle EINTR.
(raw_tell): Likewise.
(raw_size): Likewise.
(raw_truncate): Likewise.
(raw_close): Likewise.
(buf_flush): Call raw_seek instead of lseek.
(buf_read): Likewise.
(buf_write): Likewise.
(fd_to_stream): Handle EINTR.
(tempfile_open): Likewise.
(regular_file2): Likewise.
(compare_file_filename): Likewise.
(find_file): Likewise.
(inquire_sequential): Likewise.
(inquire_direct): Likewise.
(inquire_formatted): Likewise.
From-SVN: r240902
2016-09-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/48298
* io/inquire.c (inquire_via_unit): Adjust error check for the
two possible internal unit KINDs.
* io/io.h: Adjust defines for is_internal_unit and
is_char4_unit. (gfc_unit): Add internal unit data to structure.
(get_internal_unit): Change declaration to set_internal_unit.
(free_internal_unit): Change name to stash_internal_unit_number.
(get_unique_unit_number): Adjust parameter argument.
Define IOPARM_DT_HAS_UDTIO. (gfc_saved_unit): New structure.
* io/list_read.c (next_char_internal): Use is_char4_unit.
* io/open.c (st_open): Adjust call to get_unique_unit_number.
* io/transfer.c (write_block): Use is_char4_unit.
(data_transfer_init): Update check for unit numbers.
(st_read_done): Free the various allocated memories used for the
internal units and stash the negative unit number and pointer to unit
structure to allow reuse. (st_write_done): Likewise stash the freed
unit.
* io/unit.c: Create a fixed size buffer of 16 gfc_saved_unit's to use
as a stack to save newunit unit numbers and unit structure for reuse.
(get_external_unit): Change name to get_gfc_unit to better
reflect what it does. (find_unit): Change call to get_gfc_unit.
(find_or_create_unit): Likewise. (get_internal_unit): Change
name to set_internal_unit. Move internal unit from the dtp
structure to the gfc_unit structure so that it can be passed to
child I/O statements through the UNIT.
(free_internal_unit): Change name to stash_internal_unit_number.
Push the common.unit number onto the newunit stack, saving it
for possible reuse later. (get_unit): Set the internal unit
KIND. Use get_unique_unit_number to get a negative unit number
for the internal unit. Use get_gfc_unit to get the unit structure
and use set_internal_unit to initialize it.
(init_units): Initialize the newunit stack.
(get_unique_unit_number): Check the stack for an available unit
number and use it. If none there get the next most negative
number. (close_units): Free any unit structures pointed to from the save
stack.
2016-09-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* gfortran.h (gfc_dt): Add *udtio.
* ioparm.def: Add bit IOPARM_dt_f2003 to align with library use of bit
25. Add IOPARM_dt_dtio bit to common flags.
* resolve.c (resolve_transfer): Set dt->udtio to expression.
* io.c (gfc_match_inquire): Adjust error message for internal
unit KIND.
* libgfortran.h: Adjust defines for GFC_INTERNAL_UNIT4,
GFC_INTERNAL_UNIT, and GFC_INVALID_UNIT.
* trans-io.c (build_dt): Set common_unit to reflect the KIND of
the internal unit. Set mask bit for presence of dt->udtio.
2016-09-23 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* gfortran.dg/negative_unit_check.f90: Update test.
* gfortran.dg/dtio_14.f90: New test.
From-SVN: r240456
2016-09-06 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/77393
* io/write_float.def (build_float_string): Recognize when the
result will not fit in the user provided, star fill, and exit
early.
* gfortran.dg/fmt_f0_2.f90: Update test.
* gfortran.dg/fmt_f0_3.f90: New test.
From-SVN: r240018
2016-08-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/77393
* io/write.c (kind_from_size): New function to calculate required buffer
size based on kind type. (select_buffer, select_string): Use new
function. (write_float_0, write_real, write_real_g0, write_complex):
Adjust calls to pass parameters needed by new function.
From-SVN: r239900
Jerry DeLisle
Janne Blomqvist
Thomas Koenig
Jim Wilson
Janus Weil
Dominique d'Humieres
Paul Thomas
Jakub Jelinek
Francois-Xavier Coudert
Fritz Reese