In glibc, sysdeps/i386/nptl/tls.h has
typedef struct
{
void *tcb; /* Pointer to the TCB. Not necessarily the
thread descriptor used by libpthread. */
dtv_t *dtv;
void *self; /* Pointer to the thread descriptor. */
int multiple_threads;
uintptr_t sysinfo;
uintptr_t stack_guard;
uintptr_t pointer_guard;
int gscope_flag;
int __glibc_reserved1;
/* Reservation of some values for the TM ABI. */
void *__private_tm[4];
/* GCC split stack support. */
void *__private_ss;
} tcbhead_t;
and sysdeps/x86_64/nptl/tls.h has
typedef struct
{
void *tcb; /* Pointer to the TCB. Not necessarily the
thread descriptor used by libpthread. */
dtv_t *dtv;
void *self; /* Pointer to the thread descriptor. */
int multiple_threads;
int gscope_flag;
uintptr_t sysinfo;
uintptr_t stack_guard;
uintptr_t pointer_guard;
unsigned long int vgetcpu_cache[2];
int __glibc_reserved1;
int __glibc_unused1;
/* Reservation of some values for the TM ABI. */
void *__private_tm[4];
/* GCC split stack support. */
void *__private_ss;
long int __glibc_reserved2;
/* Must be kept even if it is no longer used by glibc since programs,
like AddressSanitizer, depend on the size of tcbhead_t. */
__128bits __glibc_unused2[8][4] __attribute__ ((aligned (32)));
void *__padding[8];
} tcbhead_t;
The offsets of __private_tm are
i386: 36 bytes
x32: 48 bytes
x86_64: 80 bytes
and the offsets of pointer_guard are:
i386: 24 bytes
x32: 28 bytes
x86_64: 48 bytes
But config/linux/x86/tls.h had
#ifdef __x86_64__
#ifdef __LP64__
# define SEG_READ(OFS) "movq\t%%fs:(" #OFS "*8),%0"
# define SEG_WRITE(OFS) "movq\t%0,%%fs:(" #OFS "*8)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorq\t$17,%0\n\t" \
"xorq\t%%fs:48,%0"
# define SEG_ENCODE_WRITE(OFS) "xorq\t%%fs:48,%0\n\t" \
"rolq\t$17,%0\n\t" \
SEG_WRITE(OFS)
#else
// For X32.
# define SEG_READ(OFS) "movl\t%%fs:(" #OFS "*4),%0"
# define SEG_WRITE(OFS) "movl\t%0,%%fs:(" #OFS "*4)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorl\t$9,%0\n\t" \
"xorl\t%%fs:24,%0"
# define SEG_ENCODE_WRITE(OFS) "xorl\t%%fs:24,%0\n\t" \
"roll\t$9,%0\n\t" \
SEG_WRITE(OFS)
#endif
#else
# define SEG_READ(OFS) "movl\t%%gs:(" #OFS "*4),%0"
# define SEG_WRITE(OFS) "movl\t%0,%%gs:(" #OFS "*4)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorl\t$9,%0\n\t" \
"xorl\t%%gs:24,%0"
# define SEG_ENCODE_WRITE(OFS) "xorl\t%%gs:24,%0\n\t" \
"roll\t$9,%0\n\t" \
SEG_WRITE(OFS)
#endif
static inline struct gtm_thread *gtm_thr(void)
{
struct gtm_thread *r;
asm volatile (SEG_READ(10) : "=r"(r));
return r;
}
static inline void set_gtm_thr(struct gtm_thread *x)
{
asm volatile (SEG_WRITE(10) : : "r"(x));
}
static inline struct abi_dispatch *abi_disp(void)
{
struct abi_dispatch *r;
asm volatile (SEG_DECODE_READ(11) : "=r"(r));
return r;
}
static inline void set_abi_disp(struct abi_dispatch *x)
{
void *scratch;
asm volatile (SEG_ENCODE_WRITE(11) : "=r"(scratch) : "0"(x));
}
SEG_READ, SEG_WRITE, SEG_DECODE_READ and SEG_ENCODE_WRITE were correct
only for x86-64.
Update SEG_READ and SEG_WRITE to use the offset of __private_tm as base
and correct the offset of pointer_guard for x32. This patch doesn't
change ABI of libitm.
PR libitm/85988
* config/linux/x86/tls.h (SEG_READ): Use the offset of
__private_tm as base.
(SEG_WRITE): Likewise.
(SEG_ENCODE_WRITE): Correct the offset of pointer_guard for x32.
(gtm_thr): Replace SEG_READ(10) with SEG_READ(0).
(set_gtm_thr): Replace SEG_WRITE(10) with SEG_WRITE(0).
(abi_disp): Replace SEG_DECODE_READ(11) with SEG_DECODE_READ(1).
(set_abi_disp): Replace SEG_ENCODE_WRITE(11) with
SEG_ENCODE_WRITE(1).
From-SVN: r261491
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: Use scan-ltrans-tree-dump.
* lib/scanltranstree.exp: New file.
* lib/target-supports.exp (scan-ltrans-tree-dump_required_options)
(scan-ltrans-tree-dump-times_required_options)
(scan-ltrans-tree-dump-not_required_options)
(scan-ltrans-tree-dump-dem_required_options)
(scan-ltrans-tree-dump-dem-not_required_options): New proc.
* lib/gcc-dg.exp: Include scanltranstree.exp.
* testsuite/lib/libatomic.exp: Include scanltranstree.exp.
* testsuite/lib/libgomp.exp: Include scanltranstree.exp.
* testsuite/lib/libitm.exp: Include scanltranstree.exp.
* testsuite/lib/libvtv.exp: Include scanltranstree.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add ltrans-tree.
From-SVN: r259838
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: New test.
* gcc.dg/ipa/ipa-icf-38a.c: New test.
* lib/scandump.exp (dump-base): New proc.
(scan-dump, scan-dump-times, scan-dump-not, scan-dump-dem)
(scan-dump-dem-not): Add and handle parameter for suffix of the dump
base.
* lib/scanipa.exp: Add "" argument to scan-dump calls.
* lib/scanlang.exp: Same.
* lib/scanrtl.exp: Same.
* lib/scantree.exp: Same.
* lib/scanwpaipa.exp: New file.
* lib/gcc-dg.exp: Include scanwpaipa.exp.
* testsuite/lib/libatomic.exp: Include scanwpaipa.exp.
* testsuite/lib/libgomp.exp: Include scanwpaipa.exp.
* testsuite/lib/libitm.exp: Include scanwpaipa.exp.
* testsuite/lib/libvtv.exp: Include scanwpaipa.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add wpa-ipa.
From-SVN: r259837
Use unsigned integer to unwind shadow stack by replacing jle with jbe and
jg with ja.
PR target/85489
* config/x86/sjlj.S (GTM_longjmp): Replace jle/jg with jbe/ja.
From-SVN: r259559
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Expand the gtm_jmpbuf structure by one word field to add
Intel CET support further. The code in sjlj.S already
allocates more space on the stack then gtm_jmpbuf needs.
Use this extra space to absorb the new field.
The structure is allocated on the stack in such a way
that eip/rsp field is overlapped with return address on
the stack. Locate the new field right before eip/rsp so
code that accesses buffer fields relative to address of
gtm_jmpbuf has its offsets unchanged.
* libitm/config/x86/target.h: Add new field (ssp).
* libitm/config/x86/sjlj.S: Change offsets.
From-SVN: r254907
PR other/79046
libatomic/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libffi/
* configure.ac: Add GCC_BASE_VER.
* include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* configure: Regenerated.
* testsuite/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* man/Makefile.in: Regenerated.
libgomp/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libitm/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libmpx/
* mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* mpxwrap/Makefile.am (gcc_version): Likewise.
* mpxrt/Makefile.in: Regenerated.
* mpxwrap/Makefile.in: Regenerated.
liboffloadmic/
* plugin/configure.ac: Add GCC_BASE_VER.
* plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* plugin/configure: Regenerated.
* plugin/aclocal.m4: Regenerated.
* plugin/Makefile.in: Regenerated.
libsanitizer/
* interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@
instead of cat to get version from BASE-VER file.
* asan/Makefile.am (gcc_version): Likewise.
* ubsan/Makefile.am (gcc_version): Likewise.
* sanitizer_common/Makefile.am (gcc_version): Likewise.
* lsan/Makefile.am (gcc_version): Likewise.
* tsan/Makefile.am (gcc_version): Likewise.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libvtv/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
From-SVN: r244742
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
Since GTM::gtm_thread has
gtm_thread *next_thread __attribute__((__aligned__(HW_CACHELINE_SIZE)));
GTM::gtm_thread::operator new () calls xmalloc with separate_cl == true.
xmalloc must return memory on cache line in this case.
PR libitm/70456
* util.cc (xmalloc): Use posix_memalign to allocate memory on
on cache line if requested.
From-SVN: r235211
The attached patch adds the a target specific attribute via the
new target macro TARGET_BEGIN_TRANSACTION_ATTRIBUTE to the
function begin_transaction(). S/390 uses this to set the
soft-float target attribute which is needed to fix a crash with
-m31.
As there seems to be no place in libitm to document internal macros like
USE_HTM_FASTPATH or the new macro, I've put the documentation in a
comment where the macro is used.
2016-03-03 Dominik Vogt <vogt@linux.vnet.ibm.com>
* config/s390/target.h (TARGET_BEGIN_TRANSACTION_ATTRIBUTE): Define
function attribute to disable floating point in begin_transaction() on
S/390.
* beginend.cc (begin_transaction): Use
TARGET_BEGIN_TRANSACTION_ATTRIBUTE.
From-SVN: r233929
This patch adds an easy way to write tests for expected multiline
output. For example we can test carets and underlines for
a particular diagnostic with:
/* { dg-begin-multiline-output "" }
typedef struct _GMutex GMutex;
^~~~~~~
{ dg-end-multiline-output "" } */
multiline.exp is used by prune.exp; hence we need to load it before
prune.exp via *load_gcc_lib* for the testsuites of the various
non-"gcc" support libraries (e.g. boehm-gc).
gcc/testsuite/ChangeLog:
* lib/multiline.exp: New file.
* lib/prune.exp: Load multiline.exp.
(prune_gcc_output): Call into multiline.exp to handle any
multiline output directives.
* lib/libgo.exp: Load multiline.exp before prune.exp, using
load_gcc_lib.
boehm-gc/ChangeLog:
* testsuite/lib/boehm-gc.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libatomic/ChangeLog:
* testsuite/lib/libatomic.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libgomp/ChangeLog:
* testsuite/lib/libgomp.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libitm/ChangeLog:
* testsuite/lib/libitm.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libvtv/ChangeLog:
* testsuite/lib/libvtv.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
From-SVN: r228655
H.J. Lu
Jason Merrill
Tom de Vries
Jakub Jelinek
David Malcolm
Igor Tsimbalist
Jakub Jelinek
Martin Sebor
Rainer Orth
Jonathan Wakely
Uros Bizjak
Torvald Riegel
Alan Modra
Matthias Klose
Dominik Vogt
Richard Henderson
Daniel Jacobowitz
Jason Merrill
Gleb Fotengauer-Malinovskiy
Carlos Sánchez de La Lama
Uros Bizjak