gcc/
* expr.c (do_store_flag): Expand vector comparison as
VEC_COND_EXPR if vector comparison is not supported
by target.
gcc/testsuite/
* gcc.dg/pr68286.c: New test.
From-SVN: r230238
2015-11-12 Hristian Kirtchev <kirtchev@adacore.com>
* contracts.adb (Analyze_Entry_Or_Subprogram_Body_Contract):
Remove the guard concerning entry bodies as it is spurious.
(Analyze_Entry_Or_Subprogram_Contract): Skip the analysis of
Contract_Cases when not annotating the tree.
* einfo.adb: Node25 is now used as Contract_Wrapper.
(Contract_Wrapper): New routine.
(PPC_Wrapper): Removed.
(Set_Contract_Wrapper): New routine.
(Set_PPC_Wrapper): Removed.
(Write_Field25_Name): Add output for Contract_Wrapper. Remove
output for PPC_Wrapper.
* einfo.ads: New attribute Contract_Wrapper along with usage
in entities. Remove attribute PPC_Wrapper along with usage in nodes.
(Contract_Wrapper): New routine along with pragma Inline.
(PPC_Wrapper): Removed along with pragma Inline.
(Set_Contract_Wrapper): New routine along with pragma Inline.
(Set_PPC_Wrapper): Removed along with pragma Inline.
* exp_ch9.adb (Build_Contract_Wrapper): New routine.
(Build_PPC_Wrapper): Removed.
(Build_Protected_Entry): Code cleanup.
(Expand_Entry_Declaration): Create a contract wrapper
which now verifies Contract_Cases along with pre/postconditions.
(Expand_N_Task_Type_Declaration): There is no need to check
whether an entry has pre/postconditions as this is now done
in Build_Contract_Wrapper.
* sem_ch13.adb (Analyze_Aspect_Specifications): Pragma
Refined_Post is now properly inserted in entry bodies.
(Insert_Pragma): Add circuitry to insert in an entry body. Redo
the instance "header" circuitry. Remove the now obsolete special
case of inserting pre- conditions.
* sem_prag.adb (Analyze_Pragma): Pragma Contract_Cases now
applies to entries.
* sem_res.adb (Resolve_Entry_Call): Update the calls to
PPC_Wrapper.
From-SVN: r230236
2015-11-12 Ed Schonberg <schonberg@adacore.com>
* exp_attr.adb (Compile_Stream_Body_In_Scope): When compiling
a stream operation for an array type, install the scope of the
component type if it is private and not in scope, to prevent
spurious errors if the full view of the component type has
defaulted discriminants.
From-SVN: r230234
2015-11-12 Eric Botcazou <ebotcazou@adacore.com>
* sem_ch13.adb (Analyze_Attribute_Definition_Clause): For a
variable, if this is not an overlay, set on Treat_As_Volatile on it.
* gcc-interface/decl.c (E_Variable): Do not force the type to volatile
for address clauses. Tweak and adjust various RM references.
2015-11-12 Eric Botcazou <ebotcazou@adacore.com>
* checks.ads: Minor comment fix.
From-SVN: r230233
2015-11-12 Eric Botcazou <ebotcazou@adacore.com>
* einfo.ads (Overlays_Constant): Document usage for E_Constant.
* freeze.adb (Warn_Overlay): Small reformatting.
(Check_Address_Clause): Deal specifically with deferred
constants. For a variable or a non-imported constant
overlaying a constant object and with initialization value,
either remove the initialization or issue a warning. Fix a
couple of typos.
* sem_util.adb (Note_Possible_Modification): Overhaul the condition for
the warning on modified constants and use Find_Overlaid_Entity instead
of doing it manually.
* sem_ch13.adb (Analyze_Attribute_Definition_Clause): Compute and
set Overlays_Constant once on entry. Do not treat the overlaid
entity as volatile. Do not issue the warning on modified
constants here.
* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Constant>: Remove
over-restrictive condition for the special treatment of deferred
constants.
<E_Variable>: Remove obsolete associated code.
From-SVN: r230229
2015-11-12 Eric Botcazou <ebotcazou@adacore.com>
* gcc-interface/trans.c (gnat_to_gnu) <N_Subprogram_Renaming_Decl>: Do
not materialize renamed subprograms if only annotating types.
From-SVN: r230228
2015-11-12 Pierre-Marie de Rodat <derodat@adacore.com>
* gcc-interface/decl.c (gnat_to_gnu_entity): Create
IMPORTED_DECL nodes to describe the subprogram renamings which
are relevant at debug time.
* gcc-interface/gigi.h (get_debug_scope): Add declaration.
* gcc-interface/trans.c (Identifier_to_gnu): Consider
N_Defining_Operator_Symbol as valid entities.
(gnat_to_gnu): Handle N_Defining_Operator_Symbol the same way as
other entities. Introduce a specific handling for
N_Subprogram_Renaming_Declaration: call gnat_to_gnu_entity on
the entity defined for relevant ones.
(process_decls): Process subprogram renaming declarations during
the second pass only.
* gcc-interface/utils.c (get_debug_scope): Make it external.
Consider N_Defining_Operator_Symbol as valid entities.
(gnat_write_global_declarations): Output debugging information
for top-level imported declarations.
* gcc-interface/Makefile.in: Fix typo.
From-SVN: r230227
2015-11-12 Emmanuel Briot <briot@adacore.com>
* s-os_lib.ads: Documentation update.
2015-11-12 Arnaud Charlet <charlet@adacore.com>
* s-taprop-vxworks.adb, s-osinte-vxworks.ads: Use a single import of
taskDelay to avoid confusion.
2015-11-12 Ed Schonberg <schonberg@adacore.com>
* exp_ch6.adb (Expand_Simple_Function_Return): If the return
type is class-wide and the expression is a view conversion,
remove the conversion to prevent overriding of the tag, which
must be that of the object being returned.
2015-11-12 Tristan Gingold <gingold@adacore.com>
* bindgen.adb (Gen_Adainit): Code cleanup.
2015-11-12 Hristian Kirtchev <kirtchev@adacore.com>
* s-stalib.ads: Code cleanup.
2015-11-12 Ed Schonberg <schonberg@adacore.com>
* sem_ch3.adb (Analyze_Incomplete_Type_Decl): small optimization.
(Analyze_Subtype_Declaration): For floating point types,
inherit dimensions.
(OK_For_Limited_Init_In_05): Handle properly a conditional
expression whose condition is static, and is rewritten as the
branch that will be executed.
2015-11-12 Ed Schonberg <schonberg@adacore.com>
* sem_attr.adb (Resolve_Attribute, case 'Access): If the context
type is an access constant type, do not mark the attribute
reference as a possible modification of the prefix.
From-SVN: r230226
* sem_ch6.adb (Analyze_Procedure_Call) If CodePeer_Mode is True,
do not analyze the expression of a machine code insertion.
* sem_ch13.adb (Analyze_Code_Statement) If CodePeer_Mode is True,
mark the N_Code_Statement node as analyzed and do nothing else.
From-SVN: r230225
2015-11-12 Ed Schonberg <schonberg@adacore.com>
* sem_ch6.adb (Check_Limited_Return): Make global to package
for use elsewhere.
(Analyze_Expression_Function): Remove duplicated code, pre-analyze
expression to capture names and call Check_Limited_Return so
that semantic checks are identical to those for regular functions
returning limited types.
2015-11-12 Gary Dismukes <dismukes@adacore.com>
* bindgen.adb: Fix typo.
* sem_ch6.adb: Minor reformatting.
2015-11-12 Emmanuel Briot <briot@adacore.com>
* s-os_lib.adb (Argument_String_To_List): fix handling of
windows separators
From-SVN: r230224
gcc/
2015-11-12 Renlin Li <renlin.li@arm.com>
* config/arm/arm.md (addsi3_compare_op2): Make the order of
assembly pattern consistent with constraint order.
From-SVN: r230222
2015-11-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (gen_compare_reg): Swap operands also when we
do not expand to rtl.
From-SVN: r230217
* config/i386/i386.c (ix86_legitimate_combined_insn): Reject
combined insn if the alignment of vector mode memory operand
is less than ssememalign.
testsuite/ChangeLog:
* gcc.target/i386/sse-1.c (swizzle): Assume that a is
aligned to 64 bits.
From-SVN: r230215
2015-11-12 Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* fold-const.c (fold_binary_loc) : Move Convert A/B/C to A/(B*C)
to match.pd.
Move Convert A/(B/C) to (A/B)*C to match.pd.
Move Convert C1/(X*C2) into (C1/C2)/X to match.pd.
Move Optimize (X & (-A)) / A where A is a power of 2, to
X >> log2(A) to match.pd.
* match.pd (rdiv (rdiv:s @0 @1) @2): New simplifier.
(rdiv @0 (rdiv:s @1 @2)): New simplifier.
(div (convert? (bit_and @0 INTEGER_CST@1)) INTEGER_CST@2):
New simplifier.
(rdiv REAL_CST@0 (mult @1 REAL_CST@2)): New simplifier.
From-SVN: r230204
Earlier, graphite used to translate portions of the original program after
scop-detection in order to represent the SCoP into polyhedral model. This was
required because each basic block was represented as independent basic block in
the polyhedral model. So all the cross-basic-block dependencies were translated
out-of-ssa.
With this patch those dependencies are also exposed to the ISL, so there is no
need to modify the original structure of the program.
After this patch we should be able to enable graphite at some default
optimization level.
Highlights:
Remove cross bb scalar to array translation
For reductions, add support for more than just INT_CST
Early bailout on codegen.
Verify loop-closed ssa structure during copy of renames
The uses of exprs should come from bb which dominates the bb
Collect the init value of close phi in loop-guard
Do not follow vuses for close-phi, postpone loop-close phi until the
corresponding loop-phi is processed
Bail out if no bb found to place cond/loop -phis
Move insertion of liveouts at the end of codegen
Insert loop-phis in the loop-header.
This patch passes regtest and bootstrap with BOOT_CFLAGS='-O2 -fgraphite-identity -floop-nest-optimize'
2015-11-11 Aditya Kumar <aditya.k7@samsung.com>
Sebastian Pop <s.pop@samsung.com>
* graphite-isl-ast-to-gimple.c (class translate_isl_ast_to_gimple):
New member codegen_error
(translate_isl_ast_for_loop): Remove call to single_succ_edge and early return.
(translate_isl_ast_node_user): Early return in case of error.
(translate_isl_ast_to_gimple::translate_isl_ast): Same.
(translate_isl_ast_to_gimple::translate_pending_phi_nodes): New.
(add_parameters_to_ivs_params): Remove macro.
(graphite_regenerate_ast_isl): Add if_region pointer to region.
* graphite-poly.c (new_poly_dr): Remove macro.
(print_pdr): Same.
(new_gimple_poly_bb): Same.
(free_gimple_poly_bb): Same.
(print_scop_params): Same.
* graphite-poly.h (struct poly_dr): Same.
(struct poly_bb): Add new_bb.
(gbb_from_bb): Remove dead code.
(pbb_from_bb): Same.
* graphite-scop-detection.c (parameter_index_in_region_1): Same.
(parameter_index_in_region): Same.
(find_scop_parameters): Same.
(build_cross_bb_scalars_def): New.
(build_cross_bb_scalars_use): New.
(graphite_find_cross_bb_scalar_vars): New
(try_generate_gimple_bb): Reads and Writes.
(build_alias_set): Move.
(gather_bbs::before_dom_children): Gather bbs visited.
(build_scops): call build_alias_set.
* graphite-sese-to-poly.c (phi_arg_in_outermost_loop): Delete.
(remove_simple_copy_phi): Delete.
(remove_invariant_phi): Delete.
(simple_copy_phi_p): Delete.
(reduction_phi_p): Delete.
(isl_id_for_dr): Remove unused param.
(parameter_index_in_region_1): Remove macro usage.
(set_scop_parameter_dim): Same.
(add_param_constraints): Same.
(add_conditions_to_constraints): Same
(build_scop_iteration_domain): Same.
(pdr_add_alias_set): Comment.
(add_scalar_version_numbers): New.
(build_poly_dr): ISL id.
(build_scop_drs): Move.
(build_poly_sr_1): Same.
(insert_stmts): Remove.
(build_poly_sr): New.
(new_pbb_from_pbb): Delete.
(insert_out_of_ssa_copy_on_edge): Delete.
(create_zero_dim_array): Delete.
(scalar_close_phi_node_p): Delete.
(propagate_expr_outside_region): Delete.
(rewrite_close_phi_out_of_ssa): Delete.
(rewrite_phi_out_of_ssa): Delete.
(rewrite_degenerate_phi): Delete.
(rewrite_reductions_out_of_ssa): Delete.
(rewrite_cross_bb_scalar_dependence): Delete.
(handle_scalar_deps_crossing_scop_limits):
(rewrite_cross_bb_scalar_deps): Delete.
(build_poly_scop): Remove calls to out-of-ssa functions.
* graphite.c (graphite_transform_loops): Early return in case of codegen error.
* sese.c (debug_rename_map_1): Delete.
(debug_rename_map): Delete.
(sese_record_loop): Remove macro.
(build_sese_loop_nests): Same.
(new_sese_info): Same.
(free_sese_info): Same.
(sese_insert_phis_for_liveouts):
(is_loop_closed_ssa_use): New.
(number_of_phi_nodes): New.
(bb_contains_loop_close_phi_nodes): New.
(bb_contains_loop_phi_nodes): New.
(phi_uses_name): New.
(is_valid_rename):
(get_rename): Add old_bb and loop_phi for more precise matching of
exprs.
(set_rename): Pass region.
(later_of_the_two): New.
(gsi_insert_earliest): New.
(collect_all_ssa_names): New.
(substitute_ssa_name): New.
(rename_all_uses): New.
(get_rename_from_scev): New.
(rename_uses): Pass old_bb for more precise matching of exprs.
(get_def_bb_for_const): New.
(get_new_name): New.
(get_loc): New.
(get_edges): New.
(copy_loop_phi_args): New.
(copy_loop_phi_nodes): New.
(get_loop_init_value): New.
(find_init_value): New.
(find_init_value_close_phi): New.
(copy_loop_close_phi_args): New.
(copy_loop_close_phi_nodes): New.
(add_phi_arg_for_new_expr): New.
(copy_cond_phi_args): New.
(copy_cond_phi_nodes): New.
(copy_phi_nodes): New.
(should_copy_to_new_region): New.
(set_rename_for_each_def): New.
(graphite_copy_stmts_from_block): Early return in case of error.
(copy_bb_and_scalar_dependences): Same.
* sese.h (vec_find): New.
(SESE_PARAMS): Delete.
(SESE_LOOPS): Delete.
(SESE_LOOP_NEST): Delete.
(sese_contains_loop): Remove macro usage.
(sese_nb_params): Same.
(struct gimple_poly_bb): Added read_scalar_refs, write_scalar_refs.
Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r230200
The patch builds the original schedule based on the now optimized scattering
dimension instead of building one based on the loop index only.
The implementation is simpler and catches more cases where the original schedule
and the transformed schedule are the same, such as the one below:
for (i = 0; i < 1000; i++)
{
Temp = F[i];
for (j = 0; j < 1000; j++)
{
D[j] = E[j] * Temp;
A[i][j] = A[i][j] + B[i][j] * C[i][j] - D[j] ;
}
D[i] = E[i] * F[i];
}
* graphite-sese-to-poly.c (build_scop_original_schedule): Call
isl_union_map_add_map on every pbb->schedule.
From-SVN: r230191
2015-11-11 Tom de Vries <tom@codesourcery.com>
* tree-parloops.c (transform_to_exit_first_loop_alt): Insert new exit
block only when needed.
From-SVN: r230188
PR libstdc++/60421
* include/std/thread (this_thread::sleep_for): Retry on EINTR.
(this_thread::sleep_until): Retry if time not reached.
* src/c++11/thread.cc (__sleep_for): Retry on EINTR.
* testsuite/30_threads/this_thread/60421.cc: Test interruption and
non-steady clocks.
From-SVN: r230183
