libgfortran/ChangeLog:
* io/transfer.c (st_read_done_worker, st_write_done_worker):
Call unlock_unit here, add unit_lock lock around newunit_free call.
(st_read_done, st_write_done): Only call unlock_unit when not
calling the worker function.
* io/unit.c (set_internal_unit): Don't reset the unit_number
to the same number as this cause race warnings.
The FE converts the old school .eq. to ==,
and then tracks the ==. The module starts with == and so it does not
properly overload the .eq. Reversing the interfaces fixes this.
2021-02-12 Steve Kargl <sgk@troutmask.apl.washington.edu>
libgfortran/ChangeLog:
PR libfortran/95647
* ieee/ieee_arithmetic.F90: Flip interfaces of operators .eq. to
== and .ne. to /= .
gcc/testsuite/ChangeLog:
PR libfortran/95647
* gfortran.dg/ieee/ieee_12.f90: New test.
libgfortran/ChangeLog:
PR libfortran/98825
* io/transfer.c (next_record_w): Insert check for seen_dollar and if
so, skip issueing next record.
gcc/testsuite/ChangeLog:
PR libfortran/98825
* gfortran.dg/dollar_edit_descriptor_4.f: New test.
libgfortran/ChangeLog:
* runtime/ISO_Fortran_binding.c (CFI_establish): Fixed signed
char arrays. Signed char or uint8_t arrays would cause
crashes unless an element size is specified.
gcc/testsuite/ChangeLog:
* gfortran.dg/iso_fortran_binding_uint8_array.f90: New test.
* gfortran.dg/iso_fortran_binding_uint8_array_driver.c: New test.
The change in major version (and the increment from Darwin19 to 20)
caused libtool tests to fail which resulted in incorrect build settings
for shared libraries.
We take this opportunity to sort out the shared undefined symbols state
rather than propagating the current unsound behaviour into a new rev.
This change means that we default to the case that missing symbols are
considered an error, and if one wants to allow this intentionally, the
confiuration for that case should be set appropriately.
Three existing cases need undefined dynamic lookup:
libitm, where there is already a configuration mechanism to add the
flags.
libcc1, where we add simple configuration to add the flags for Darwin.
libsanitizer, where we can add to the existing extra flags.
libcc1/ChangeLog:
PR target/97865
* Makefile.am: Add dynamic_lookup to LD flags for Darwin.
* configure.ac: Test for Darwin host and set a flag.
* Makefile.in: Regenerate.
* configure: Regenerate.
libitm/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin.
* configure: Regenerate.
libsanitizer/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for
Darwin.
* configure: Regenerate.
ChangeLog:
PR target/97865
* libtool.m4: Update handling of Darwin platform link flags
for Darwin20.
gcc/ChangeLog:
PR target/97865
* configure: Regenerate.
libatomic/ChangeLog:
PR target/97865
* configure: Regenerate.
libbacktrace/ChangeLog:
PR target/97865
* configure: Regenerate.
libffi/ChangeLog:
PR target/97865
* configure: Regenerate.
libgfortran/ChangeLog:
PR target/97865
* configure: Regenerate.
libgomp/ChangeLog:
PR target/97865
* configure: Regenerate.
libhsail-rt/ChangeLog:
PR target/97865
* configure: Regenerate.
libobjc/ChangeLog:
PR target/97865
* configure: Regenerate.
libphobos/ChangeLog:
PR target/97865
* configure: Regenerate.
libquadmath/ChangeLog:
PR target/97865
* configure: Regenerate.
libssp/ChangeLog:
PR target/97865
* configure: Regenerate.
libstdc++-v3/ChangeLog:
PR target/97865
* configure: Regenerate.
libvtv/ChangeLog:
PR target/97865
* configure: Regenerate.
zlib/ChangeLog:
PR target/97865
* configure: Regenerate.
While we have `configure' checks for the individual POSIX 2008 extended
locale functions we refer to and use to guard the respective call sites,
we only verify the presence of `newlocale' for our global feature enable
check. Consequently compilation fails for targets like NetBSD that only
have partial support for POSIX 2008 locale features and in particular
lack the `uselocale' function:
.../libgfortran/io/transfer.c: In function 'data_transfer_init_worker':
.../libgfortran/io/transfer.c:3416:30: error:
'old_locale_lock' undeclared (first use in this function)
3416 | __gthread_mutex_lock (&old_locale_lock);
| ^~~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:3416:30: note: each undeclared identifier is reported only once for each function it appears in
.../libgfortran/io/transfer.c:3417:12: error:
'old_locale_ctr' undeclared (first use in this function)
3417 | if (!old_locale_ctr++)
| ^~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:3419:11: error:
'old_locale' undeclared (first use in this function); did you mean 'c_locale'?
3419 | old_locale = setlocale (LC_NUMERIC, NULL);
| ^~~~~~~~~~
| c_locale
.../libgfortran/io/transfer.c: In function 'finalize_transfer':
.../libgfortran/io/transfer.c:4253:26: error:
'old_locale_lock' undeclared (first use in this function)
4253 | __gthread_mutex_lock (&old_locale_lock);
| ^~~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:4254:10: error:
'old_locale_ctr' undeclared (first use in this function)
4254 | if (!--old_locale_ctr)
| ^~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:4256:30: error:
'old_locale' undeclared (first use in this function); did you mean 'c_locale'?
4256 | setlocale (LC_NUMERIC, old_locale);
| ^~~~~~~~~~
| c_locale
make[3]: *** [Makefile:6221: transfer.lo] Error 1
Only enable the use of POSIX 2008 extended locale features then when all
the three functions required are present, removing said build errors.
libgfortran/
* io/io.h [HAVE_NEWLOCALE]: Also check for HAVE_FREELOCALE and
HAVE_USELOCALE.
[HAVE_FREELOCALE && HAVE_NEWLOCALE && HAVE_USELOCALE]
(HAVE_POSIX_2008_LOCALE): New macro.
(st_parameter_dt) [HAVE_NEWLOCALE]: Check for
HAVE_POSIX_2008_LOCALE instead.
* io/transfer.c (data_transfer_init_worker, finalize_transfer)
[HAVE_USELOCALE]: Check for HAVE_POSIX_2008_LOCALE instead.
* io/unit.c [HAVE_NEWLOCALE]: Likewise.
(init_units) [HAVE_NEWLOCALE]: Likewise.
(close_units) [HAVE_FREELOCALE]: Likewise.
* runtime/error.c (gf_strerror) [HAVE_USELOCALE]: Likewise.
The *_HAS_* floating-point feature macros are defined as 0/1 rather than
#undef/#define settings by gcc/c-family/c-cppbuiltin.c. Consequently we
choose to use infinity and NaN features even with non-IEEE-754 targets
such as `vax-netbsdelf' that lack them, causing build warnings and
failures like:
In file included from .../libgfortran/generated/maxval_r4.c:26:
.../libgfortran/generated/maxval_r4.c: In function 'maxval_r4':
.../libgfortran/libgfortran.h:292:30: warning: target format does not support infinity
292 | # define GFC_REAL_4_INFINITY __builtin_inff ()
| ^~~~~~~~~~~~~~
.../libgfortran/generated/maxval_r4.c:149:19:
note: in expansion of macro 'GFC_REAL_4_INFINITY'
149 | result = -GFC_REAL_4_INFINITY;
| ^~~~~~~~~~~~~~~~~~~
.../libgfortran/generated/maxval_r4.c: In function 'mmaxval_r4':
.../libgfortran/libgfortran.h:292:30: warning: target format does not support infinity
292 | # define GFC_REAL_4_INFINITY __builtin_inff ()
| ^~~~~~~~~~~~~~
.../libgfortran/generated/maxval_r4.c:363:19:
note: in expansion of macro 'GFC_REAL_4_INFINITY'
363 | result = -GFC_REAL_4_INFINITY;
| ^~~~~~~~~~~~~~~~~~~
{standard input}: Assembler messages:
{standard input}:204: Fatal error: Can't relocate expression
make[3]: *** [Makefile:3358: maxval_r4.lo] Error 1
Correct the checks then for __FLT_HAS_INFINITY__, __DBL_HAS_INFINITY__,
__LDBL_HAS_INFINITY__, __FLT_HAS_QUIET_NAN__, __DBL_HAS_QUIET_NAN__, and
__LDBL_HAS_QUIET_NAN__ to match semantics and remove build issues coming
from the misinterpretation of these macros.
libgfortran/
* libgfortran.h: Use #if rather than #ifdef with
__FLT_HAS_INFINITY__, __DBL_HAS_INFINITY__,
__LDBL_HAS_INFINITY__, __FLT_HAS_QUIET_NAN__,
__DBL_HAS_QUIET_NAN__, and __LDBL_HAS_QUIET_NAN__.
On macOS / Darwin, the environ variable can be used directly in the
code of an executable, but cannot be used in the code of a shared
library (i.e. libgfortran.dylib), in this case.
In such cases, the function _NSGetEnviron should be called to get
the address of 'environ'.
libgfortran/ChangeLog:
* intrinsics/execute_command_line.c (environ): Use
_NSGetEnviron to get the environment pointer on Darwin.
The random number generator internal state may be saved to/restored from
an array of integers. Clean up calculation of needed number of elements
to avoid redefiniton of auxiliary macro SZ.
libgfortran/ChangeLog:
* intrinsics/random.c (SZ_IN_INT_4): Define size of state in int32_t.
(SZ_IN_INT_8): Define size of state in int64_t.
(SZ): Remove.
(random_seed_i4): Use size SZ_IN_INT_4 instead of SZ.
(random_seed_i8): Use size SZ_IN_INT_8 instead of SZ.
The MATMUL intrinsic provided a wrong result for rank-1 times rank-2 array
when a negative stride was used for addressing the elements of the rank-1
array, because a check on strides was erroneously placed before the check
on the rank. Interchange order of checks.
libgfortran/ChangeLog:
* m4/matmul_internal.m4: Move check for rank-1 times rank-2 before
checks on strides for rank-2 times rank-2.
* generated/matmul_c10.c: Regenerated.
* generated/matmul_c16.c: Likewise.
* generated/matmul_c4.c: Likewise.
* generated/matmul_c8.c: Likewise.
* generated/matmul_i1.c: Likewise.
* generated/matmul_i16.c: Likewise.
* generated/matmul_i2.c: Likewise.
* generated/matmul_i4.c: Likewise.
* generated/matmul_i8.c: Likewise.
* generated/matmul_r10.c: Likewise.
* generated/matmul_r16.c: Likewise.
* generated/matmul_r4.c: Likewise.
* generated/matmul_r8.c: Likewise.
* generated/matmulavx128_c10.c: Likewise.
* generated/matmulavx128_c16.c: Likewise.
* generated/matmulavx128_c4.c: Likewise.
* generated/matmulavx128_c8.c: Likewise.
* generated/matmulavx128_i1.c: Likewise.
* generated/matmulavx128_i16.c: Likewise.
* generated/matmulavx128_i2.c: Likewise.
* generated/matmulavx128_i4.c: Likewise.
* generated/matmulavx128_i8.c: Likewise.
* generated/matmulavx128_r10.c: Likewise.
* generated/matmulavx128_r16.c: Likewise.
* generated/matmulavx128_r4.c: Likewise.
* generated/matmulavx128_r8.c: Likewise.
gcc/testsuite/ChangeLog:
* gfortran.dg/matmul_20.f90: New test.
AIX FAT libraries should be built with the version of AR chosen by configure.
The GNU Make $(AR) variable includes the AIX -X32_64 option needed
by the default Makefile rules to accept both 32 bit and 64 bit object files.
The -X32_64 option conflicts with ar archiving objects of the same name
used to build FAT libraries.
This patch changes the Makefile fragments for AIX FAT libraries to use $(AR),
but strips the -X32_64 option from the Make variable.
libgcc/ChangeLog:
2020-09-27 Clement Chigot <clement.chigot@atos.net>
* config/rs6000/t-slibgcc-aix: Use $(AR) without -X32_64.
libatomic/ChangeLog:
2020-09-27 Clement Chigot <clement.chigot@atos.net>
* config/t-aix: Use $(AR) without -X32_64.
libgomp/ChangeLog:
2020-09-27 Clement Chigot <clement.chigot@atos.net>
* config/t-aix: Use $(AR) without -X32_64.
libstdc++-v3/ChangeLog:
2020-09-27 Clement Chigot <clement.chigot@atos.net>
* config/os/aix/t-aix: Use $(AR) without -X32_64.
libgfortran/ChangeLog:
2020-09-27 Clement Chigot <clement.chigot@atos.net>
* config/t-aix: Use $(AR) without -X32_64.
The IALL intrinsic would always return 0 when the DIM and MASK arguments
were present since the initial value of repeated BIT-AND operations was
set to 0 instead of -1.
libgfortran/ChangeLog:
* m4/iall.m4: Initial value for result should be -1.
* generated/iall_i1.c (miall_i1): Generated.
* generated/iall_i16.c (miall_i16): Likewise.
* generated/iall_i2.c (miall_i2): Likewise.
* generated/iall_i4.c (miall_i4): Likewise.
* generated/iall_i8.c (miall_i8): Likewise.
gcc/testsuite/ChangeLog:
* gfortran.dg/iall_masked.f90: New test.
Runtime error occurs when the type of the value argument is
character(0): "Zero-length string passed as value...".
The status argument, intent(out), will contain -1 if the value
of the environment is too large to fit in the value argument, this
is the case if the type is character(0) so there is no reason to
produce a runtime error if the value argument is zero length.
2020-08-24 Mark Eggleston <markeggleston@gcc.gnu.org>
libgfortran/
PR fortran/96486
* intrinsics/env.c: If value_len is > 0 blank the string.
Copy the result only if its length is > 0.
2020-08-24 Mark Eggleston <markeggleston@gcc.gnu.org>
gcc/testsuite/
PR fortran/96486
* gfortran.dg/pr96486.f90: New test.
Zero length f format descriptors are valid for Fortran 95 and
later. For g format descriptors from Fortran 2008 and later.
Finally for D, E, EN and ES for Fortran 2018 and later.
2020-08-20 Mark Eggleston <markeggleston@gcc.gnu.org>
libgfortran/
PR fortran/96436
* io/format.c (parse_format_list): Add new local variable
"standard" to hold the required standard to check. If the
format width is zero select standard depending on descriptor.
Call notification_std using the new standard variable.
2020-08-20 Mark Eggleston <markeggleston@gcc.gnu.org>
gcc/testsuite/
PR fortran/96436
* gfortran.dg/pr96436_1.f90: New test.
* gfortran.dg/pr96436_2.f90: New test.
* gfortran.dg/pr96436_3.f90: New test.
* gfortran.dg/pr96436_4.f90: New test.
* gfortran.dg/pr96436_5.f90: New test.
* gfortran.dg/pr96436_6.f90: New test.
* gfortran.dg/pr96436_7.f90: New test.
* gfortran.dg/pr96436_8.f90: New test.
* gfortran.dg/pr96436_9.f90
* gfortran.dg/pr96436_10.f90
libgfortran/ChangeLog:
PR target/96306
* configure.ac: Add LIBGOMP_CHECKED_INT_KINDS and
LIBGOMP_CHECKED_REAL_KINDS and use it for to skip
integer kind=16 checks for amdgcn.
* Makefile.am (kinds.h, selected_int_kind.inc,
selected_real_kind.inc): Pass them on.
* mk-kinds-h.sh: Takes to-be-check kinds as argument.
* mk-sik-inc.sh: Likewise.
* mk-srk-inc.sh: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
