PR gcov-profile/94570
* ltmain.sh: Do not define HAVE_DOS_BASED_FILE_SYSTEM
for CYGWIN.
PR gcov-profile/94570
* coverage.c (coverage_init): Use separator properly.
PR gcov-profile/94570
* filenames.h (defined): Do not define HAVE_DOS_BASED_FILE_SYSTEM
for CYGWIN.
Co-Authored-By: Jonathan Yong <10walls@gmail.com>
We recently rearranged the gdb source tree to move a common library
and gdbserver to the top-level. This made the build more uniform and
also a bit faster (due to sharing of built objects).
This patch re-syncs these changes the top-level configury back to gcc.
ChangeLog:
* configure: Rebuild.
* Makefile.in: Rebuild.
* Makefile.def (gdbsupport, gdbserver): New host modules.
(configure-gdb): Depend on all-gdbsupport.
(all-gdb): Depend on all-gdbsupport, all-libctf.
* configure.ac (host_tools): Add gdbserver.
Conditionally build gdbserver and gdbsupport.
I left SiFive a bit more than three months ago, and while I sent out a message
saying I was going to updated my email address I neclected to actually do so.
I'm moving to my personal email address to avoid the need to do this again.
gcc/ChangeLog
2020-02-20 Palmer Dabbelt <palmer@sifive.com>
* MAINTAINERS: Change palmer@sifive.com to palmer@dabbelt.com.
This un-documents constraints that cannot (or should not) be used in
inline assembler. It also improves markup, and presentation in general.
More work is needed, but gradual improvement is easier to do.
* config/rs6000/constraints.md: Improve documentation.
/
* doc/md.texi (PowerPC and IBM RS6000): Improve documentation.
ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-ml.in (msp430-*-*): Support --disable-no-exceptions configure
flag.
gcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (STARTFILE_SPEC) [!fexceptions]: Use
crtbegin_no_eh.o if building for the C language.
[fno-exceptions]: Use crtbegin_no_eh.o if building for any language
except C.
(ENDFILE_SPEC) [!fexceptions]: Use crtend_no_eh.o if building for
the C language.
[fno-exceptions]: Use crtend_no_eh.o if building for any language
except C.
* config/msp430/t-msp430: Add -fno-exceptions multilib.
* doc/install.texi: Document --disable-no-exceptions multilib configure
option.
* doc/sourcebuild.texi: Document exceptions_enabled effective target.
gcc/testsuite/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* lib/gcc-dg.exp: Add dg-prune messages for when exception handling is
disabled.
* lib/target-supports.exp (check_effective_target_exceptions_enabled):
New.
libgcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: Add crt{begin,end}_no_eh.o to "extra_parts".
* config.host (msp430*-*-elf): Add crt{begin,end}_no_eh.o to
"extra_parts".
From-SVN: r279246
The FTP protocol is getting long in the tooth, and we should emphasize
HTTPS where that is available. This patch changes various gcc.gnu.org
URL's to instead use HTTPS.
For instance, kernel.org shut down FTP access in 2017, with the
explanation:
- The protocol is inefficient and requires adding awkward kludges to
firewalls and load-balancing daemons
- FTP servers have no support for caching or accelerators, which has
significant performance impacts
- Most software implementations have stagnated and see infrequent
updates
ChangeLog:
2019-11-20 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Use https for gcc.gnu.org.
* configure: Regenerated.
gcc/ChangeLog:
2019-11-20 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Use https for gcc.gnu.org.
* configure: Regenerated.
* doc/install.texi: Use https for gcc.gnu.org.
* doc/sourcebuild.texi: Likewise.
gcc/testsuite/ChangeLog:
2019-11-20 Janne Blomqvist <jb@gcc.gnu.org>
* README: Use https for gcc.gnu.org.
libstdc++-v3/ChangeLog:
2019-11-20 Janne Blomqvist <jb@gcc.gnu.org>
* doc/html/api.html: Use https for gcc.gnu.org.
* doc/xml/api.xml: Likewise.
maintainer-scripts/ChangeLog:
2019-11-20 Janne Blomqvist <jb@gcc.gnu.org>
* gcc_release: Use https for gcc.gnu.org.
From-SVN: r278526
To restore powerpc bootstrap.
2019-11-19 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Revert:
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
* cse.c (cse_insn): Delete no-op register moves too.
* simplify-rtx.c (comparison_to_mask): Handle unsigned comparisons.
Take a second comparison to control the value for NE.
(mask_to_comparison): Handle unsigned comparisons.
(simplify_logical_relational_operation): Likewise. Update call
to comparison_to_mask. Handle AND if !HONOR_NANs.
(simplify_binary_operation_1): Call the above for AND too.
gcc/testsuite/
Revert:
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
* gcc.target/aarch64/sve/acle/asm/ptest_pmore.c: New test.
From-SVN: r278455
Bump the minimum MPFR version to 3.1.0, released 2011-10-03. With this
requirement one can still build GCC with the operating system provided
MPFR on old but still supported operating systems like SLES 12 (MPFR
3.1.2) or RHEL/CentOS 7.x (MPFR 3.1.1).
This allows removing some code in the Fortran frontend, as well as
fixing PR 91828.
ChangeLog:
2019-11-11 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/91828
* configure.ac: Bump minimum MPFR to 3.1.0, recommended to 3.1.6+.
* configure: Regenerated.
gcc/ChangeLog:
2019-11-11 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/91828
* doc/install.texi: Document that the minimum MPFR version is
3.1.0.
gcc/fortran/ChangeLog:
2019-11-11 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/91828
* simplify.c (gfc_simplify_fraction): Remove fallback path for
MPFR < 3.1.0.
From-SVN: r278058
Extend dg-extract-results.sh and dg-extract-results.py to support the
KPASS test result status. This is required by GDB which uses a copy
of the dg-extract-results.{sh,py} scripts that it tries to keep in
sync with GCC.
ChangeLog:
* contrib/dg-extract-results.sh: Add support for KPASS.
* contrib/dg-extract-results.py: Likewise.
From-SVN: r277260
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
gdb should normally not be linked with -static-libstdc++. Currently
this has not caused problems, but it's incompatible with catching an
exception thrown from a shared library -- and a subsequent patch
changes gdb to do just this.
This patch adds a new --with-static-standard-libraries flag to the
top-level configure. It defaults to "auto", which means enabled if
gcc is being built, and disabled otherwise.
ChangeLog
2019-08-19 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Add --with-static-standard-libraries.
From-SVN: r274673
Oops, I forgot to update the MAINTAINERS file a couple of months ago,
when the address there stopped working.
Honestly, I haven't really had much involvement with the frv, mn10300
or sh ports for almost 15 years, so I wouldn't mind if someone else
stepped up and took over, but until someone does, I don't mind
reviewing the occasional patch, so it's best if it can reach me ;-)
for ChangeLog
* MAINTAINERS: aoliva from @redhat.com to @gcc.gnu.org.
From-SVN: r274556
2019-07-08 Kito Cheng <kito.cheng@sifive.com>
* MAINTAINERS (Write After Approval): Remove myself, already listed in
RISC-V port maitainer.
From-SVN: r273235
