When using the go tool with gccgo, this changes the default
compilation to use -O2. The -gccgoflags option can be used to
override this default. I think this change better corresponds to what
people expect when using the go tool.
Reviewed-on: https://go-review.googlesource.com/c/164378
From-SVN: r269299
PR go/89172
internal/cpu, runtime, runtime/pprof: handle function descriptors
When using PPC64 ELF ABI v1 a function address is not a PC, but is the
address of a function descriptor. The first field in the function
descriptor is the actual PC (see
http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#FUNC-DES).
The libbacktrace library knows about this, and libgo uses actual PC
values consistently except for the helper function funcPC that appears
in both runtime and runtime/pprof.
This patch fixes funcPC by recording, in the internal/cpu package,
whether function descriptors are being used. We have to check for
function descriptors using a C compiler check, because GCC can be
configured using --with-abi to select the ELF ABI to use.
Fixes https://gcc.gnu.org/PR89172
Reviewed-on: https://go-review.googlesource.com/c/162978
From-SVN: r269266
Backport https://golang.org/cl/163237 from the master library:
Ensure that cmd/go consistently calls base.Exit rather than os.Exit,
so that we don't incorrectly leave the work directory around on exit.
Test this by modifying the testsuite to run all the tests with TMPDIR
set to a temporary directory, and then check that no files are left
behind in that temporary directory. Adjust a couple of tests to make
this approach work.
Updates https://gcc.gnu.org/PR89406
Reviewed-on: https://go-review.googlesource.com/c/163198
From-SVN: r269086
In signal-triggered stack scan, if the signal is delivered at
certain bad time (e.g. in vdso, or in the middle of setcontext?),
the unwinder may not be able to unwind the whole stack, while it
still reports _URC_END_OF_STACK. So we cannot rely on _URC_END_OF_STACK
to tell if it successfully scanned the stack. Instead, we check
the last Go frame to see it actually reached the end of the stack.
For Go-created stack, this is runtime.kickoff. For C-created
stack, we need to record the outermost Go frame when it enters
the Go side.
Also we cannot unwind the stack if the signal is delivered in the
middle of runtime.gogo, halfway through a goroutine switch, where
the g and the stack don't match. Give up in this case as well.
Reviewed-on: https://go-review.googlesource.com/c/159098
From-SVN: r269018
Compiling with LTO revealed a number of cases in the runtime and
standard library where C and Go disagreed about the type of an object or
function (or where Go and code generated by the compiler disagreed). In
all cases the underlying representation was the same (e.g., uintptr vs.
void*), so this wasn't causing actual problems, but it did result in a
number of annoying warnings when compiling with LTO.
Reviewed-on: https://go-review.googlesource.com/c/160700
From-SVN: r268923
PR go/89168
libgo: change gotest to run examples with output
Change the gotest script to act like "go test" and run examples that
have "output" comments. This is not done with full generality, but
just enough to run the libgo tests. Other packages should be tested
with "go test" as usual.
While we're here clean up some old bits of gotest, and only run
TestXXX functions that are actually in *_test.go files. The latter
change should fix https://gcc.gnu.org/PR89168.
Reviewed-on: https://go-review.googlesource.com/c/162139
From-SVN: r268922
PR go/89199
sync/atomic: use strong form of atomic_compare_exchange_n
In the recent change to use atomic_compare_exchange_n I thought we
could use the weak form, which can spuriously fail. But that is not
how it is implemented in the gc library, and it is not what the rest
of the library expects.
Thanks to Lynn Boger for identifying the problem.
Fixes https://gcc.gnu.org/PR89199
Reviewed-on: https://go-review.googlesource.com/c/161359
From-SVN: r268591
GCC has supported the __atomic intrinsics since 4.7. They are better
than the __sync intrinsics in that they specify a memory model and,
more importantly for our purposes, they are reliably implemented
either in the compiler or in libatomic.
Fixes https://gcc.gnu.org/PR52084
Reviewed-on: https://go-review.googlesource.com/c/160820
From-SVN: r268458
If sigtramp and sigtrampgo are both on stack, n -= framesToDiscard
is executed twice, which should actually run only once.
Reviewed-on: https://go-review.googlesource.com/c/159238
From-SVN: r268366
If a panic happens in the runtime we turn that into a fatal error.
We use the caller's PC to determine if the panic call is inside
the runtime. getcallerpc returns the PC immediately after the
call instruction. If the call is the very last instruction of a
function, it may not find this PC belong to a runtime function,
giving false result. We need to back off the PC by 1 to the call
instruction.
The gc runtime doesn't do this because the gc compiler always
emit an instruction following a panic call, presumably an UNDEF
instruction which turns into an architecture-specific illegal
instruction. Our compiler doesn't do this.
Reviewed-on: https://go-review.googlesource.com/c/159437
From-SVN: r268358
Precise stack scan uses SIGURG to trigger a stack scan. We need
to have Go signal handler installed for SIGURG.
Reviewed-on: https://go-review.googlesource.com/c/159097
From-SVN: r268230
For the gofrontend copy, change calls to types.SizesFor to pass
"gccgo" rather than "gc". Leave the asmdecl pass unchanged since that
pass is gc-specific anyhow.
This has been fixed in a better way in the external repo by
https://golang.org/cl/158317 and friends, but that is not in 1.12, so
use this approach for now.
Reviewed-on: https://go-review.googlesource.com/c/158842
From-SVN: r268153
PR go/88927
runtime, internal/cpu: fix build for ARM GNU/Linux
Was failing with
../../../libgo/go/internal/cpu/cpu.go:138:2: error: reference to undefined name 'doinit'
138 | doinit()
| ^
Fix it by adding in Go 1.12 internal/cpu/cpu_arm.go, and the code in
runtime that initializes the values.
Fixes https://gcc.gnu.org/PR88927.
Reviewed-on: https://go-review.googlesource.com/c/158717
From-SVN: r268131
Restore some of the fixes that were applied to golang_org/x/net/lif
but were lost when 1.12 moved the directory to internal/x/net/lif.
Add support for reading /proc to fetch argc/argv/env for c-archive mode.
Reviewed-on: https://go-review.googlesource.com/c/158640
From-SVN: r268130
Reviewed-on: https://go-review.googlesource.com/c/158019
gotools/:
* Makefile.am (go_cmd_vet_files): Update for Go1.12beta2 release.
(GOTOOLS_TEST_TIMEOUT): Increase to 600.
(check-runtime): Export LD_LIBRARY_PATH before computing GOARCH
and GOOS.
(check-vet): Copy golang.org/x/tools into check-vet-dir.
* Makefile.in: Regenerate.
gcc/testsuite/:
* go.go-torture/execute/names-1.go: Stop using debug/xcoff, which
is no longer externally visible.
From-SVN: r268084
Currently, we dropg (which clears gp.m) after we CAS the g status
to _Grunnable or _Gwaiting. Immediately after CASing the g status,
another thread may CAS it to _Gscan status and scan its stack.
With precise stack scan, it accesses gp.m in order to switch to g
and back (in doscanstackswitch). This races with dropg. If
doscanstackswitch reads gp.m, then dropg runs, when we restore
the m at the end of the scan it will set to a stale value. Worse,
if dropg runs after doscanstackswitch sets the new m, gp will be
running with a nil m.
To fix this, we do dropg before CAS g status to _Grunnable or
_Gwaiting. We can do this safely if we are CASing from _Grunning,
as we own the g when it is in _Grunning. There is one case where
we CAS from _Gsyscall to _Grunnable. It is not safe to dropg when
it is in _Gsyscall, as precise stack scan needs to read gp.m in
order to signal the m. So we need to introduce a transient state,
_Gexitingsyscall, between _Gsyscall and _Grunnable, where the GC
should not scan its stack.
In is a little unfortunate that we have to add another g status.
We could reuse an existing one (e.g. _Gcopystack), but it is
clearer and safer to just use a new one, as Austin suggested.
Reviewed-on: https://go-review.googlesource.com/c/158157
From-SVN: r268001
Many C syscall functions take pointer arguments. The pointers
don't escape in the C functions. Mark the C functions noescape so
calling them doesn't need allocation.
Reviewed-on: https://go-review.googlesource.com/c/158158
From-SVN: r267989
CL 157557 changes the compiler to add one byte padding to
non-empty struct ending with a zero-sized field. Add the same
padding to the FFI type, so reflect.Call works.
This fixes test/fixedbugs/issue26335.go in the main repo.
Reviewed-on: https://go-review.googlesource.com/c/158018
From-SVN: r267956
This ports https://golang.org/cl/155918 from the master repo.
runtime: panic on uncomparable map key, even if map is empty
Reorg map flags a bit so we don't need any extra space for the extra flag.
This is a pre-req for updating libgo to the Go 1.12beta2 release.
Reviewed-on: https://go-review.googlesource.com/c/157858
From-SVN: r267950
This is the gccgo version of https://golang.org/cl/141822:
Only return a pointer p to the new slices backing array from makeslice.
Makeslice callers then construct sliceheader{p, len, cap} explictly
instead of makeslice returning the slice.
This change caused the GCC backend to break the runtime/pprof test by
merging together the identical functions allocateReflectTransient and
allocateTransient2M. This caused the traceback to be other than
expected. Fix that by making the functions not identical.
This is a step toward updating libgo to the Go1.12beta1 release.
Reviewed-on: https://go-review.googlesource.com/c/155937
From-SVN: r267660
Currently, when collecting a traceback for another goroutine,
getTraceback calls gogo(gp) switching to gp, which will resume in
mcall, which will call gtraceback, which will set up gp->m. There
is a gap between setting the current running g to gp and setting
gp->m. If a profiling signal arrives in between, sigtramp will
see a non-nil gp with a nil m, and will seg fault. Fix this by
setting up gp->m first.
Fixesgolang/go#29448.
Reviewed-on: https://go-review.googlesource.com/c/156038
From-SVN: r267658
This increases the time to wait for signals to be delivered in the
TestAtomicStop testcase. When running gccgo tests on ppc64 or ppc64le,
there are intermittent failures in this test because the wait time is
too small.
Updates golang/go#29046
Reviewed-on: https://go-review.googlesource.com/c/153879
From-SVN: r267068
This CL adds support of precise stack scan using stack maps to
the runtime. The stack maps are generated by the compiler (if
supported). Each safepoint is associated with a (real or dummy)
landing pad, and its "type info" in the exception table is a
pointer to the stack map. When a stack is scanned, the stack map
is found by the stack unwinding code by inspecting the exception
table (LSDA).
For precise stack scan we need to unwind the stack. There are
three cases:
- If a goroutine is scanning its own stack, it can unwind the
stack and scan the frames.
- If a goroutine is scanning another, stopped, goroutine, it
cannot directly unwind the target stack. We handle this by
switching (runtime.gogo) to the target g, letting it unwind
and scan the stack, and switch back.
- If we are scanning a goroutine that is blocked in a syscall,
we send a signal to the target goroutine's thread, and let the
signal handler unwind and scan the stack. Extra care is needed
as this races with enter/exit syscall.
Currently this is only implemented on linux.
Reviewed-on: https://go-review.googlesource.com/c/140518
From-SVN: r266832
In buildmodeinit, the c-archive buildmode is flagged as invalid
on linux/ppc64 for gccgo when it should be valid. This happens
because the check against the gccgo flag is done after the checks
for valid GOOS/GOARCH pairs instead of before as is done for all
other buildmode cases in this switch. This corrects the problem and
allows several of the gccgo gotools testcases to pass on linux/ppc64.
Updates #29046
Reviewed-on: https://go-review.googlesource.com/c/152137
From-SVN: r266764
For inlined function bodies we're going to need to refer to variables,
so change the existing export data to add a '$' to names that look
like identifiers: true, false, nil, convert.
While we're here drop an unnecessary space character after operators.
Reviewed-on: https://go-review.googlesource.com/c/150067
From-SVN: r266529
Create a framework for putting function bodies in export data. At
present only empty functions will be put there, and they will be
ignored on import. Later patches will get this to the point of
supporting inlining of (some) functions defined in other packages.
Reviewed-on: https://go-review.googlesource.com/c/150061
From-SVN: r266490
The code to implement new-style gccgo name mangling had a recipe that
didn't quite match the one in the compiler (incorrect handling for
'.'). This showed up as a failure in the gotools cgo test if the
directory containing the test run included a "." character.
Reviewed-on: https://go-review.googlesource.com/c/147917
From-SVN: r265981
Fix asm name directive for the C version of log/syslog.syslog_c,
which didn't get included in the recent name mangling change.
Reviewed-on: https://go-review.googlesource.com/c/145017
From-SVN: r265533
The current implementation of Gogo::pkgpath_for_symbol was written in
a way that allowed two distinct package paths to map to the same
symbol, which could cause collisions at link- time or compile-time.
Switch to a better mangling scheme to insure that we get a unique
packagepath symbol for each package. In the new scheme instead of having
separate mangling schemes for identifiers and package paths, the
main identifier mangler ("go_encode_id") now handles mangling of
both packagepath characters and identifier characters.
The new mangling scheme is more intrusive: "foo/bar.Baz" is mangled as
"foo..z2fbar.Baz" instead of "foo_bar.Baz". To mitigate this, this
patch also adds a demangling capability so that function names
returned from runtime.CallersFrames are converted back to their
original unmangled form.
Changing the pkgpath_for_symbol scheme requires updating a number of
//go:linkname directives and C "__asm__" directives to match the new
scheme, as well as updating the 'gotest' driver (which makes
assumptions about the correct mapping from pkgpath symbol to package
name).
Fixesgolang/go#27534.
Reviewed-on: https://go-review.googlesource.com/c/135455
From-SVN: r265510
PR go/87661
runtime: remove unused armArch, hwcap and hardDiv
After CL 140057 these are only written but never read in gccgo.
Reviewed-on: https://go-review.googlesource.com/c/141077
From-SVN: r265439
Introduce a new "types" command to the export data to record the
number of types and the size of their export data. It is immediately
followed by new "type" commands that can be indexed. Parse all the
exported types immediately so that we register them, but parse other
type data only as needed.
Reviewed-on: https://go-review.googlesource.com/c/143022
From-SVN: r265409
Previously when export data referred to a type that was not defined in
a directly imported package, we would write the package name as
additional information in the type's export data. That approach
required all type information to be read in order. This patch changes
the compiler to find all references to indirectly imported packages,
and write them out as an indirectimport line in the import data. This
will permit us to read exported type data out of order.
The type traversal used to find indirect imports is a little more
complicated than necessary in preparation for later patches in this
series.
Reviewed-on: https://go-review.googlesource.com/c/143020
From-SVN: r265296
The export data, which is approximately readable and looks something
like Go, was first implemented back when Go still used semicolons.
Drop the semicolons, to make it look slightly more Go like and make it
slightly smaller.
This updates the compiler and the gccgoimporter package.
This introduces a new version of the export data. There are going to
be more changes to the export data, so this version is still subject
to change.
Reviewed-on: https://go-review.googlesource.com/c/143018
From-SVN: r265284
LLVM doesn't support non-call exception. This test was passing
more or less by luck: if the faulting instruction is between two
calls with the same landing pad (in instruction layout order,
not the program's logic order), it generates a merged PC range
that covers the faulting instruction. If the instruction layout
order changes, or it uses two different (but may be degenerate)
landing pads, this doesn't work.
Reviewed-on: https://go-review.googlesource.com/c/140517
From-SVN: r264985
Use inline assembly in the implementation of internal_cpu.xgetbv as
opposed to a call to the intrinsic _xgetbv(), since non-gcc compilers
(e.g. clang) may or may not have support for it.
Reviewed-on: https://go-review.googlesource.com/c/140137
From-SVN: r264882
This reportedly happens on CentOS 5.11. The real code will work fine;
this test is assuming that the unexported slice function will handle
the splice, but if pipe2 does not work then it doesn't. The relevant
code in internal/poll/splice_linux.go says "Falling back to pipe is
possible, but prior to 2.6.29 splice returns -EAGAIN instead of 0 when
the connection is closed."
Reviewed-on: https://go-review.googlesource.com/138838
From-SVN: r264793
This is enough to let libgo build when configured using
--with-multilib-list=m64,m32,mx32. I don't have an x32-enabled kernel
so I haven't tested whether it executes correctly.
For https://gcc.gnu.org/PR87470
Reviewed-on: https://go-review.googlesource.com/138817
From-SVN: r264772
On Alpha GNU/Linux there is no geteuid system call, there is only
getresuid. The raw geteuid system call is only used for testing, so
just skip the test if it's not available.
Reviewed-on: https://go-review.googlesource.com/137655
From-SVN: r264647
In internal/bytealg correct a +build tag to never build indexbyte_generic.go
for the gofrontend, where we always use indexbyte_native.go.
For internal/cpu let the Makefile define CacheLineSize using goarch.sh,
rather than trying to enumerate all the possibilities in cpu_ARCH.go files.
In internal/poll call the C fcntl function rather than using SYS_FCNTL.
Change mksysinfo.sh to ensure that F_GETPIPE_SZ is always defined,
and check that in internal/poll.
Reviewed-on: https://go-review.googlesource.com/137256
From-SVN: r264572
This permits TestScript to work when gccgo is not installed.
Previous testing was using a previously installed gccgo, not the newly
built one.
This revealed that the testing of whether an internal package is
permitted was incorrect for standard library packages, since the
uninstalled gccgo can see internal packages in the uninstalled libgo.
Fix the internal package tests.
This permitted removing a couple of gccgo-specific changes in the
testsuite.
Reviewed-on: https://go-review.googlesource.com/137255
From-SVN: r264570
Reviewed-on: https://go-review.googlesource.com/136435
gotools/:
* Makefile.am (mostlyclean-local): Run chmod on check-go-dir to
make sure it is writable.
(check-go-tools): Likewise.
(check-vet): Copy internal/objabi to check-vet-dir.
* Makefile.in: Rebuild.
From-SVN: r264546
In 1.11 writebarrierptr is going away, so change the compiler to call
gcWriteBarrier instead. We weren't using gcWriteBarrier before;
adjust the implementation to use the putFast method.
This revealed a problem in the kickoff function. When using cgo,
kickoff can be called on the g0 of an m allocated by newExtraM. In
that case the m will generally have a p, but systemstack may be called
by wbBufFlush as part of flushing the write barrier buffer. At that
point the buffer is full, so we can not do a write barrier. So adjust
the existing code in kickoff so that in the case where we are g0,
don't do any write barrier at all.
Reviewed-on: https://go-review.googlesource.com/131395
From-SVN: r264295
In the sweep code we can sometimes see incorrect counts when
conservative stack scanning causes us to grey an object that we
earlier decided could be freed. We already ignored this check, but
adjust this case to maintain correct span counts when it happens.
This gives us slightly more correct numbers in MemStats, and helps
avoid a rare failure in TestReadMemStats.
Also fix the free index, and cope with finding a full span when
allocating a new one.
Reviewed-on: https://go-review.googlesource.com/134216
From-SVN: r264294
Unlike the gc runtime, libgo stores traceback information in location
structs, which contain strings. Therefore, copying location structs
around appears to require write barriers, although in fact write
barriers are never important because the strings are never allocated
in Go memory. They come from libbacktrace.
Some of the generated write barriers come at times when write barriers
are not permitted. For example, exitsyscall, marked
nowritebarrierrec, calls exitsyscallfast which calls traceGoSysExit
which calls traceEvent which calls traceStackID which calls
trace.stackTab.put which copies location values into memory allocated
by tab.newStack. This write barrier can be invoked when there is no
p, causing a crash.
This change fixes the problem by ensuring that location values are
copied around in the tracing code with no write barriers.
This was found by fixing the compiler to fully implement
//go:nowritebarrierrec; CL to follow.
Reviewed-on: https://go-review.googlesource.com/134226
From-SVN: r264282
To reduce the amount of time spent in write barrier processing
(specifically runtime.bulkBarrierPreWrite), add support for building a
'GC roots index', basically a sorted list of all roots, so as to
allow more efficient lookups of gcdata structures for globals. The
previous implementation worked on the raw (unsorted) roots list
itself, which did not scale well.
Reviewed-on: https://go-review.googlesource.com/132595
From-SVN: r264276
This is the gofrontend version of https://golang.org/cl/91796.
This is part of that CL, just the compiler change and required runtime
changes, in preparation for updating libgo to 1.11.
Relevant part of original CL description:
The hmap field in the maptype is only used by the runtime to check the sizes of
the hmap structure created by the compiler and runtime agree.
Comments are already present about the hmap structure definitions in the
compiler and runtime needing to be in sync.
Reviewed-on: https://go-review.googlesource.com/130976
From-SVN: r263941
This is a port of https://golang.org/cl/109596 to the gofrontend, in
preparation for updating libgo to 1.11.
Original CL description:
getcallersp is intrinsified, and so the dummy arg is no longer
needed. Remove it, as well as a few dummy args that are solely
to feed getcallersp.
Reviewed-on: https://go-review.googlesource.com/131116
From-SVN: r263840
Fix up the testing package to insure that execution traces
work properly (e.g. "-test.trace=<XXX>" command line option). The
call to stop tracing and emit the output file was stubbed out.
Reviewed-on: https://go-review.googlesource.com/128275
From-SVN: r263363
When writing stack frames to the pprof CPU profile machinery, it is
very important to insure that the frames emitted do not contain any
frames corresponding to artifacts of the profiling process itself
(signal handlers, sigprof, etc). This patch changes runtime.sigprof to
strip out those frames from the raw stack generated by
"runtime.callers".
Fixesgolang/go#26595.
Reviewed-on: https://go-review.googlesource.com/126175
From-SVN: r263035
The libffi library doesn't understand zero-sized objects.
When we see a zero-sized field in a struct, just skip it when
converting to the FFI data structures. There is no value to pass in
any case, so not telling libffi about the field doesn't affect
anything.
The test case for this is https://golang.org/cl/123316.
Fixesgolang/go#26335
Reviewed-on: https://go-review.googlesource.com/123335
From-SVN: r262651
PR go/86331
os: check return value as well as error from waitid
https://gcc.gnu.org/PR86331 indicates that if a signal handler runs it
is possible for syscall.Syscall6 to return a non-zero errno value even
if no error occurs. That is a problem in general, but this fix will
let us work around the general problem for the specific case of
calling waitid.
Reviewed-on: https://go-review.googlesource.com/121595
From-SVN: r262313
Adjust the hash and string fields computed by StructOf to match the
values that the compiler computes for a struct type with the same
field names and types. This makes the reflect code match the
compiler's Type::hash_for_method and Type::reflection methods.
Fixesgolang/go#25284
Reviewed-on: https://go-review.googlesource.com/116515
From-SVN: r261235
Background: since gccgo does not currently merge identical types at link time,
the reflect function canonicalize() exists to choose a canonical specimen
for each set of identical types.
In this way, user code has the guarantee that identical types
will always compare as ==
Change: arrange reflect functions MapOf(), SliceOf(), StructOf() etc.
to call canonicalize() on the types they create, before storing the types
in internal lookup caches and returning them.
This fixes known cases where canonicalize() is needed but was missing.
Supersedes https://golang.org/cl/112575 and mostly fixes issue 25284.
Updates golang/go#25284
Reviewed-on: https://go-review.googlesource.com/115577
From-SVN: r261216
Backport https://golang.org/cl/113715 and https://golang.org/cl/113716:
cmd/go: don't pass -compiler flag to vet
Without this running go vet -compiler=gccgo causes vet to fail.
The vet tool does need to know the compiler, but it is passed in
vetConfig.Compiler.
cmd/go, cmd/vet, go/internal/gccgoimport: make vet work with gccgo
When using gccgo/GoLLVM, there is no package file for a standard
library package. Since it is impossible for the go tool to rebuild the
package, and since the package file exists only in the form of a .gox
file, this seems like the best choice. Unfortunately it was confusing
vet, which wanted to see a real file. This caused vet to report errors
about missing package files for standard library packages. The
gccgoimporter knows how to correctly handle this case. Fix this by
1) telling vet which packages are standard;
2) letting vet skip those packages;
3) letting the gccgoimporter handle this case.
As a separate required fix, gccgo/GoLLVM has no runtime/cgo package,
so don't try to depend on it (as it happens, this fixesgolang/go#25324).
The result is that the cmd/go vet tests pass when using -compiler=gccgo.
Reviewed-on: https://go-review.googlesource.com/114516
From-SVN: r260913
Several recent changes to the gc version of cmd/go improve the
gofrontend support. These changes are partially copies of existing
gofrontend differences, and partially new code. This CL makes the
gofrontend match the upstream code.
The changes included here come from:
https://golang.org/cl/111575https://golang.org/cl/111595https://golang.org/cl/111635https://golang.org/cl/111636
For the record, the following recent gc changes are based on code
already present in the gofrontend repo:
https://golang.org/cl/110915https://golang.org/cl/111615
For the record, a gc change, partially based on earlier gofrontend
work, also with new gc code, was already copied to gofrontend repo in
CL 111099:
https://golang.org/cl/111097
This moves the generated list of standard library packages from
cmd/go/internal/load to go/build.
Reviewed-on: https://go-review.googlesource.com/112475
gotools/:
* Makefile.am (check-go-tool): Don't copy zstdpkglist.go.
* Makefile.in: Rebuild.
From-SVN: r260097
In https://golang.org/cl/111097 the gc version of cmd/go was updated
to include some gofrontend-specific changes. The gofrontend code
already has different versions of those changes; this CL makes the
gofrontend match the upstream code.
Reviewed-on: https://go-review.googlesource.com/111099
From-SVN: r259918
These tests used to be disabled in the gofrontend since the go tool
didn't support build IDs for the gofrontend. It does now, so enable
the tests again.
Reviewed-on: https://go-review.googlesource.com/111098
From-SVN: r259875
We're never going to use stack.go for gccgo. Although a build tag
keeps it from being built, even having it around can be confusing.
Remove it.
Reviewed-on: https://go-review.googlesource.com/40774
From-SVN: r259865
Bring in https://golang.org/cl/98616 from gc tip.
Original CL description:
This change modifies Go to disable loading of users' shell history for
TestTerminalSignal tests. TestTerminalSignal, as part of its workload,
will execute a new interactive bash shell. Bash will attempt to load the
user's history from the file pointed to by the HISTFILE environment
variable. For users with large histories that may take up to several
seconds, pushing the whole test past the 5 second timeout and causing
it to fail.
Reviewed-on: https://go-review.googlesource.com/107624
From-SVN: r259452
The gccgo runtime is never stale, and on a system with gc sources in
~/go the test may wind up checking whether the gc runtime is stale.
Reviewed-on: https://go-review.googlesource.com/102282
From-SVN: r258865
PR go/84484
libgo: add support for riscv64
Patch by Andreas Schwab.
Reviewed-on: https://go-review.googlesource.com/96377
* go.test/go-test.exp (go-set-goarch): Recognize riscv64-*-*.
From-SVN: r257914
Let a fast syscall return be a preemption point. This helps with
tight loops that make system calls, as in BenchmarkSyscallExcessWork.
Reviewed-on: https://go-review.googlesource.com/94895
From-SVN: r257848
Long long long ago Go permitted writing
func F()
in one file and writing
func F() {}
in another file. This was removed from the language, and that is now
considered to be a multiple definition error. Gccgo never caught up
to that, and it has been permitting this invalid code for some time.
Stop permitting it, so that we give correct errors. Since we've
supported it for a long time, the compiler uses it in a couple of
cases: it predeclares the hash/equal methods if it decides to create
them while compiling another function, and it predeclares main.main as
a mechanism for getting the right warning if a program uses the wrong
signature for main. For simplicity, keep those existing uses.
This required a few minor changes in libgo which were relying,
unnecessarily, on the current behavior.
Reviewed-on: https://go-review.googlesource.com/93083
From-SVN: r257600
PR go/84215
runtime, sync/atomic: use write barrier for atomic pointer functions
This copies atomic_pointer.go from 1.10rc2. It was omitted during the
transition of the runtime from C to Go, and I forgot about it.
This may help with https://gcc.gnu.org/PR84215.
Reviewed-on: https://go-review.googlesource.com/93197
From-SVN: r257599
If we trace back through code that has no debug info, as when calling
through C code compiled with -g0, we won't have a function name.
Try to fetch the function name using the symbol table.
Adding the test case revealed that gotest failed to use the gccgo tag
when matching files, so add that.
Reviewed-on: https://go-review.googlesource.com/92756
From-SVN: r257495
The escape analysis support is not yet good enough to avoid escaping
the argument to funcPC. This causes unnecessary and often harmful
memory allocation. E.g., (*cpuProfile).addExtra can be called from a
signal handler, and it must not allocate memory.
Move the calls to funcPC to use variables instead. This was done in
the original migration to using funcPC, but was not done for newer code.
In one case, in signal handling code, use getSigtramp.
Reviewed-on: https://go-review.googlesource.com/92735
From-SVN: r257463
The quoting code that read _cgo_flags, currently only in the gccgo
version of cmd/go, was losing the last flag read from the file.
Fixesgolang/go#23666
Reviewed-on: https://go-review.googlesource.com/91655
From-SVN: r257373
They were disabled due to the lack of escape analysis. Now that
we have escape analysis, unskip these tests.
Reviewed-on: https://go-review.googlesource.com/86248
From-SVN: r257324
On ia64, a separate stack is used for saving/restoring register frames,
occupying the other end of the stack mapping. This must also be scanned
for pointers into the heap.
Reviewed-on: https://go-review.googlesource.com/85276
From-SVN: r257323
We were using special compilation flags for the math package, but we
weren't using them when testing. That meant that our tests were not
checking the real code we were providing. Fix that.
Fixing that revealed that we were not using a good set of flags, or at
least were not using flags that let the tests pass. Adjust the flags
to stop using -funsafe-math-optimizations on x86. Instead always use
-ffp-contract=off -fno-math-errno -fno-trapping-math for all targets.
Fixesgolang/go#23647
Reviewed-on: https://go-review.googlesource.com/91355
From-SVN: r257312
Otherwise on a 64-bit system we will read the 32-bit value as a 64-bit
value. Since getaddrinfo returns negative numbers as error values,
these will be interpreted as numbers like 0xfffffffe rather than -2,
and the comparisons with values like syscall.EAI_NONAME will fail.
Fixesgolang/go#23645
Reviewed-on: https://go-review.googlesource.com/91296
From-SVN: r257299
On ppc64 gotest treats data variables whose names begin with "Test" as
tests to run. This is to support the function descriptors used for
ppc64 ELF ABI v1. This causes gotest to think that TestAddr6 is a
test, when it is actually a variable. For a simple fix until we can
figure out how to write gotest properly, rename the variable.
Fixesgolang/go#23623
Reviewed-on: https://go-review.googlesource.com/90995
From-SVN: r257235
CL 84555 added support for the SuperH architecture, but didn't add the
randomTrap definition to be used for the getrandom syscall on Linux.
Add it now.
Reviewed-on: https://go-review.googlesource.com/90535
From-SVN: r257171
This was the original intent, as reflected in the long comment at the
start of names.cc, but I forgot to implement it.
Also, remove a leading ".0" from the final name. That could occur for
a method whose receiver type starts with 'u', as in that case we
prepend a space to the mangled name, to avoid confusion with the
Unicode mangling, and the space turns into ".0".
Also, if the Unicode encoding would cause the final to start with
"..u" or "..U", add a leading underscore.
Patch gotest to not get fooled by some names.
The result of these changes is that all symbols start with a letter or
an underscore.
Reviewed-on: https://go-review.googlesource.com/90015
From-SVN: r257068
The top three region number bits must be masked out before
right-shifting the address bits into place, otherwise they will be
copied down into the lower always-zero address bits.
Reviewed-on: https://go-review.googlesource.com/84535
From-SVN: r257061
Encode all external symbol names using only ASCII alphanumeric
characters, underscore, and dot. Use a scheme that can be reliably
demangled to a somewhat readable version as described in the long
comment in names.cc.
A minor cleanup discovered during this was that we were treating
function types as different if one had a NULL parameters_ field and
another has a non-NULL parameters_ field that has no parameters. This
worked because we mangled them slightly differently. We now mangle
them the same, so we treat them as equal, as we should anyhow.
Reviewed-on: https://go-review.googlesource.com/89555
* go.go-torture/execute/names-1.go: New test.
From-SVN: r257033
PR go/83787
compiler: pass int to makechan, call makechan64 when appropriate
The update to 1.10beta1 changed makechan to take int instead of int64,
and added a makechan64 call for large values. Since the size is the
last argument to makechan, the old compiler which always passed a
64-bit int worked fine on 64-bit systems and little-endian 32-bit
systems, but broke on big-endian 32-bit systems. This CL fixes the
compiler to use the appropriate types.
This fixes GCC PR 83787.
Reviewed-on: https://go-review.googlesource.com/88077
From-SVN: r256835
Move the architecture-specific settings out of configure.ac into a new
shell script goarch.sh. Use the new script to collect the values for
all architectures to make them available in go/types.
Also fix cmd/vet to pass the right compiler when it calls SizesFor.
This fixes cmd/vet for systems that are not implemented in the gc
toolchain, such as alpha and ia64.
Reviewed-on: https://go-review.googlesource.com/87635
From-SVN: r256655
Add missing .a files. These should have been committed with the
update to go1.10beta1, but were skipped because by default Subversion
ignores all files matching *.a.
From-SVN: r256442
PR c/82922
runtime, syscall: use full prototypes in C code
Based on patch by Martin Sebor.
Reviewed-on: https://go-review.googlesource.com/86815
From-SVN: r256437
GCC always recognizes the -fsplit-stack option, but then tests whether
it is supported by the selected target. If not, it reports
cc1: error: ‘-fsplit-stack’ is not supported by this compiler configuration
Check for that error message when deciding whether a compiler option works.
Reviewed-on: https://go-review.googlesource.com/87137
From-SVN: r256433
When compiling runtime, it is not allowed for local variables
and closures to be heap allocated. In one test, there is a go
statement with a closure. In the gc compiler, it distinguishes
capturing variable by value vs. by address, and rewrites it to
passing the captured values as arguments. Currently we don't
have this, and the escape analysis decides to heap allocate the
closure and also the captured variables, which is not allowed.
Work around it by passing the variables explicitly.
This is in preparation of turning on escape analysis for the
runtime.
Reviewed-on: https://go-review.googlesource.com/86245
From-SVN: r256419
This is in preparation of turning on escape analysis for the
runtime.
- In gccgo, systemstack is implemented with mcall, which is not
go:noescape. Wrap the closure in noescape so the escape analysis
does not think it escapes.
- Mark some C functions go:noescape. They do not leak arguments.
- Use noescape function to make a few local variables' addresses
not escape. The escape analysis cannot figure out because they
are assigned to pointer indirections.
Reviewed-on: https://go-review.googlesource.com/86244
From-SVN: r256418
Update the Go library to the 1.10beta1 release.
Requires a few changes to the compiler for modifications to the map
runtime code, and to handle some nowritebarrier cases in the runtime.
Reviewed-on: https://go-review.googlesource.com/86455
gotools/:
* Makefile.am (go_cmd_vet_files): New variable.
(go_cmd_buildid_files, go_cmd_test2json_files): New variables.
(s-zdefaultcc): Change from constants to functions.
(noinst_PROGRAMS): Add vet, buildid, and test2json.
(cgo$(EXEEXT)): Link against $(LIBGOTOOL).
(vet$(EXEEXT)): New target.
(buildid$(EXEEXT)): New target.
(test2json$(EXEEXT)): New target.
(install-exec-local): Install all $(noinst_PROGRAMS).
(uninstall-local): Uninstasll all $(noinst_PROGRAMS).
(check-go-tool): Depend on $(noinst_PROGRAMS). Copy down
objabi.go.
(check-runtime): Depend on $(noinst_PROGRAMS).
(check-cgo-test, check-carchive-test): Likewise.
(check-vet): New target.
(check): Depend on check-vet. Look at cmd_vet-testlog.
(.PHONY): Add check-vet.
* Makefile.in: Rebuild.
From-SVN: r256365
