This patch factors out the parts of goacc_enter_datum and
goacc_exit_datum that can be shared with goacc_enter_data_internal
and goacc_exit_data_internal respectively (in the next patch),
without overloading function return values or complicating code paths
unnecessarily.
2020-07-10 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
libgomp/
* oacc-mem.c (goacc_map_var_existing): New function.
(goacc_enter_datum): Use above function.
(goacc_exit_datum_1): New function.
(goacc_exit_datum): Use above function.
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
This is a fix for the pointer (or array) size inadvertently being used
for the bias with attach and detach mapping kinds, for both C and C++.
2020-07-09 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
gcc/c/
PR middle-end/95270
* c-typeck.c (c_finish_omp_clauses): Set OMP_CLAUSE_SIZE (bias) to zero
for standalone attach/detach clauses.
gcc/cp/
PR middle-end/95270
* semantics.c (finish_omp_clauses): Likewise.
include/
PR middle-end/95270
* gomp-constants.h (gomp_map_kind): Expand comment for attach/detach
mapping kinds.
gcc/testsuite/
PR middle-end/95270
* c-c++-common/goacc/mdc-1.c: Update expected dump output for zero
bias.
libgomp/
PR middle-end/95270
* testsuite/libgomp.oacc-c-c++-common/pr95270-1.c: New test.
* testsuite/libgomp.oacc-c-c++-common/pr95270-2.c: New test.
Arrange for GOMP_MAP_ATTACH to be grouped together with a preceding
GOMP_MAP_TO_PSET or other "to" data movement clause, except in cases
where an explicit "attach" clause is used.
2020-07-09 Julian Brown <julian@codesourcery.com>
include/
* gomp-constants.h (gomp_map_kind): Update comment for GOMP_MAP_TO_PSET.
libgomp/
* oacc-mem.c (find_group_last): Group data-movement clauses
(GOMP_MAP_TO_PSET, GOMP_MAP_TO, etc.) together with a subsequent
GOMP_MAP_ATTACH. Allow standalone GOMP_MAP_ATTACH also.
This patch implements the optimized logical to actual iterators
computation for triangular loops.
I have a rough implementation using integers, but this one uses floating
point. There is a small problem that -fopenmp programs aren't linked with
-lm, so it does it only if the hw has sqrt optab (and uses ifn rather than
__builtin_sqrt because it obviously doesn't need errno handling etc.).
Do you think it is ok this way, or should I use the integral computation
using inlined isqrt (we have inequation of the form
start >= x * t10 + t11 * (((x - 1) * x) / 2)
where t10 and t11 are signed long long values and start unsigned long long,
and the division by 2 actually is a problem for accuracy in some cases, so
if we do it in integral, we need to do actually
long long t12 = 2 * t10 - t11;
unsigned long long t13 = t12 * t12 + start * 8 * t11;
unsigned long long isqrt_ = isqrtull (t13);
long long x = (((long long) isqrt_ - t12) / t11) >> 1;
with careful overflow checking on all the computations before isqrtull
(and on overflows use the fallback implementation).
2020-07-09 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data): Add min_inner_iterations
and factor members.
* omp-general.c (omp_extract_for_data): Initialize them and remember
them in OMP_CLAUSE_COLLAPSE_COUNT if needed and restore from there.
* omp-expand.c (expand_omp_for_init_counts): Fix up computation of
counts[fd->last_nonrect] if fd->loop.n2 is INTEGER_CST.
(expand_omp_for_init_vars): For
fd->first_nonrect + 1 == fd->last_nonrect loops with for now
INTEGER_CST fd->loop.n2 find quadratic equation roots instead of
using fallback method when possible.
* testsuite/libgomp.c/loop-19.c: New test.
* testsuite/libgomp.c/loop-20.c: New test.
While this is an OpenMP 5.1 change, it is undesirable to let people use different
values and then deal with ABI backwards compatibility in a year or two.
2020-07-09 Jakub Jelinek <jakub@redhat.com>
* omp.h.in (omp_alloctrait_value_t): Change omp_atv_default from
2 to -1. Add omp_atv_serialized and define omp_atv_sequential using
it. Remove __omp_alloctrait_value_max__.
* allocator.c (omp_init_allocator): Handle omp_atv_default for
omp_atk_alignment and omp_atk_pool_size.
As done for 'GOMP_MAP_FROM', also for 'GOMP_MAP_FORCE_FROM' we should only
'gomp_copy_dev2host' if 'n->refcount == 0'.
This had gotten altered in commit 378da98fcc
(r279621) "OpenACC reference count overhaul".
libgomp/
* oacc-mem.c (goacc_exit_data_internal): Revert always-copyfrom
behavior for 'GOMP_MAP_FORCE_FROM'.
* testsuite/libgomp.oacc-c-c++-common/pr92843-1.c: Adjust XFAIL.
This had gotten added in commit 378da98fcc
(r279621) "OpenACC reference count overhaul", but it doesn't have any use in
OpenACC.
libgomp/
* oacc-mem.c (goacc_exit_data_internal): Remove
'GOMP_MAP_ALWAYS_FROM' handling.
These test cases use directives similar to:
/* { dg-additional-options "-save-temps" } */
/* { dg-final { scan-assembler-times "bar.sync" 2 } } */
This expects to scan the PTX offloading compilation assembler code (not host
code!), expecting that nvptx offloading code assembly is produced after the
host code, and thus overwrites the latter file. (Yes, that's certainly
ugly/fragile...)
..., and this broke with recent commit 1dedc12d18
"revamp dump and aux output names" plus fix-up commit commit
efc16503ca "handle dumpbase in offloading, adjust
testsuite" (short summary: file names changed), so let's finally make that
robust.
libgomp/
* testsuite/libgomp.oacc-c-c++-common/pr85381-2.c: Replace fragile
'scan-assembler' with 'scan-offload-rtl'.
* testsuite/libgomp.oacc-c-c++-common/pr85381-3.c: Likewise.
* testsuite/libgomp.oacc-c-c++-common/pr85381-4.c: Likewise.
* testsuite/libgomp.oacc-c-c++-common/pr85381-5.c: Likewise.
* testsuite/libgomp.oacc-c-c++-common/pr85381.c: Likewise.
This implements the fallback mentioned in
https://gcc.gnu.org/pipermail/gcc/2020-June/232874.html
Special cases for triangular loops etc. to follow later, also composite
constructs not supported yet (need to check the passing of temporaries around)
and lastprivate might not give the same answers as serial loop if the last
innermost body iteration isn't the last one for some of the outer loops
(that will need to be solved separately together with rectangular loops that have no
innermost body iterations, but some of the outer loops actually iterate).
Also, simd needs work.
2020-06-27 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data_loop): Add non_rect_referenced
member, move outer member.
(struct omp_for_data): Add first_nonrect and last_nonrect members.
* omp-general.c (omp_extract_for_data): Initialize first_nonrect,
last_nonrect and non_rect_referenced members.
* omp-expand.c (expand_omp_for_init_counts): Handle non-rectangular
loops.
(expand_omp_for_init_vars): Add nonrect_bounds parameter. Handle
non-rectangular loops.
(extract_omp_for_update_vars): Likewise.
(expand_omp_for_generic, expand_omp_for_static_nochunk,
expand_omp_for_static_chunk, expand_omp_simd,
expand_omp_taskloop_for_outer, expand_omp_taskloop_for_inner): Adjust
expand_omp_for_init_vars and extract_omp_for_update_vars callers.
(expand_omp_for): Don't sorry on non-composite worksharing-loop or
distribute.
* testsuite/libgomp.c/loop-17.c: New test.
* testsuite/libgomp.c/loop-18.c: New test.
Since GCC 9, C++17 support is no longer experimental. It was too late
to change the default C++ dialect to C++17 in GCC 10, but I think now
it's time to pull the trigger (C++14 was made the default in GCC 6.1).
We're still missing two C++17 library features, but that shouldn't stop
us. See
<https://gcc.gnu.org/onlinedocs/libstdc++/manual/status.html#status.iso.2017>
and
<https://gcc.gnu.org/projects/cxx-status.html#cxx17>
for the C++17 status.
I won't list all C++17 features here, but just a few heads-up:
- trigraphs were removed (hardly anyone cares, unless your keyboard is
missing the # key),
- operator++(bool) was removed (so some tests now run in C++14 and down
only),
- the keyword register was removed (some legacy code might trip on
this),
- noexcept specification is now part of the type system and C++17 does
not allow dynamic exception specifications anymore (the empty throw
specification is still available, but it is deprecated),
- the evaluation order rules are different in C++17,
- static constexpr data members are now implicitly inline (which makes
them definitions),
- C++17 requires guaranteed copy elision, meaning that a copy/move
constructor call might be elided completely. That means that if
something relied on a constructor being instantiated via e.g. copying
a function parameter, it might now fail.
I'll post an update for cxx-status.html and add a new caveat to changes.html
once this is in.
gcc/ChangeLog:
* doc/invoke.texi (C Dialect Options): Adjust -std default for C++.
* doc/standards.texi (C Language): Correct the default dialect.
(C++ Language): Update the default for C++ to gnu++17.
gcc/c-family/ChangeLog:
* c-opts.c (c_common_init_options): Default to gnu++17.
gcc/testsuite/ChangeLog:
* c-c++-common/torture/vector-subscript-3.c: In C++17, define away
the keyword register.
* g++.dg/cpp1z/attributes-enum-1a.C: Only run pre-C++17.
* g++.dg/cpp1z/fold7a.C: Likewise.
* g++.dg/cpp1z/nontype3a.C: Likewise.
* g++.dg/cpp1z/utf8-2a.C: Likewise.
* g++.dg/parse/error11.C: Update expected diagnostics for C++17.
* g++.dg/torture/pr34850.C: Add -Wno-attribute-warning.
* g++.dg/torture/pr49394.C: In C++17, use noexcept(false).
* g++.dg/torture/pr82154.C: Use -std=c++14.
* lib/target-supports.exp: Set to C++17.
* obj-c++.dg/try-catch-9.mm: Use -Wno-register.
libgomp/ChangeLog:
* testsuite/libgomp.c++/atomic-3.C: Use -std=gnu++14.
Pass dumpbase on to mkoffloads and their offload-target compiler runs,
using different suffixes for different offloading targets.
Obey -save-temps in naming temporary files while at that.
Adjust the testsuite offload dump scanning machinery to look for dump
files named under the new conventions, iterating internally over all
configured offload targets, or recognizing libgomp's testsuite's own
iteration.
for gcc/ChangeLog
* collect-utils.h (dumppfx): New.
* collect-utils.c (dumppfx): Likewise.
* lto-wrapper.c (run_gcc): Set global dumppfx.
(compile_offload_image): Pass a -dumpbase on to mkoffload.
* config/nvptx/mkoffload.c (ptx_dumpbase): New.
(main): Handle incoming -dumpbase. Set ptx_dumpbase. Obey
save_temps.
(compile_native): Pass -dumpbase et al to compiler.
* config/gcn/mkoffload.c (gcn_dumpbase): New.
(main): Handle incoming -dumpbase. Set gcn_dumpbase. Obey
save_temps. Pass -dumpbase et al to offload target compiler.
(compile_native): Pass -dumpbase et al to compiler.
for gcc/testsuite/ChangeLog
* lib/scanoffload.exp: New.
* lib/scanoffloadrtl.exp: Load it. Replace ".o" with ""
globally, and use scanoffload's scoff wrapper to fill it in.
* lib/scanoffloadtree.exp: Likewise.
for libgomp/ChangeLog
* testsuite/lib/libgomp.exp: Load gcc lib scanoffload.exp.
* testsuite/lib/libgomp-dg.exp: Drop now-obsolete -save-temps.
Automake and GNU Make both use the endif keyword, which conflicts and
elicits an error for matching if/ifdef and endif.
This patch changes the conditional include to use "-include" to prevent
a warning about a possible empty tmake_file.
libgomp/ChangeLog
2020-06-22 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am: Use -include.
* Makefile.in: Regenerate.
libatomic/ChangeLog
2020-06-22 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am: Use -include.
* Makefile.in: Regenerate.
libstdc++-v3/ChangeLog
2020-06-22 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am: Use -include.
* Makefile.in: Regenerate.
libgfortran/ChangeLog
2020-06-22 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am: Use -include.
* Makefile.in: Regenerate.
This patch adds the ability to configure GCC on AIX to build as a
64 bit application and to build target libraries "FAT" libraries in both
32 bit and 64 bit mode.
The patch adds makefile fragment hooks to target libraries that allows
them to include target-specific rules. The target specific rules for
AIX place both 32 bit and 64 bit objects and shared objects
in archives at the top-level, not multilib subdirectories. The
multilibs are built in subdirectories, but must be combined during the
last parts of the target library build process. Because of the way
that GCC bootstrap works, the libraries must be combined during the
multiple stages of GCC bootstrap, not solely when installed in the
final destination, so the libraries are correct at the end of
each target library build stage, not solely an install recipe.
gcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.gcc: Use t-aix64, biarch64 and default64 for cpu_is_64bit.
* config/rs6000/aix72.h (ASM_SPEC): Remove aix64 option.
(ASM_SPEC32): New.
(ASM_SPEC64): New.
(ASM_CPU_SPEC): Remove vsx and altivec options.
(CPP_SPEC_COMMON): Rename from CPP_SPEC.
(CPP_SPEC32): New.
(CPP_SPEC64): New.
(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
(TARGET_DEFAULT): Only define if not BIARCH.
(LIB_SPEC_COMMON): Rename from LIB_SPEC.
(LIB_SPEC32): New.
(LIB_SPEC64): New.
(LINK_SPEC_COMMON): Rename from LINK_SPEC.
(LINK_SPEC32): New.
(LINK_SPEC64): New.
(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
(CPP_SPEC): Same.
(CPLUSPLUS_CPP_SPEC): Same.
(LIB_SPEC): Same.
(LINK_SPEC): Same.
(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
* config/rs6000/defaultaix64.h: New file.
* config/rs6000/t-aix64: New file.
libgcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.host (extra_parts): Add crtcxa_64 and crtdbase_64.
* config/rs6000/t-aix-cxa: Explicitly compile 32 bit with -maix32
and 64 bit with -maix64.
* config/rs6000/t-slibgcc-aix: Remove extra @multilib_dir@ level.
Build and install AIX-style FAT libraries.
libgomp/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libstdc++-v3/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host (aix*): Define tmake_file.
* config/os/aix/t-aix: New file.
libatomic/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libgfortran/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host: Add system configury stanza. Define tmake_file.
* config/t-aix: New file.
Fix-up for r279858/commit f760c0c77f "Fortran]
OpenMP/OpenACC – fix more issues with OPTIONAL".
With offloading enabled, we then saw:
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O0 (test for excess errors)
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O0 execution test
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O1 (test for excess errors)
PASS: libgomp.fortran/use_device_ptr-optional-3.f90 -O1 execution test
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -O2 (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -O2 compilation failed to produce executable
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -fomit-frame-pointer -funroll-loops -fpeel-loops -ftracer -finline-functions (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -fomit-frame-pointer -funroll-loops -fpeel-loops -ftracer -finline-functions compilation failed to produce executable
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -g (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -O3 -g compilation failed to produce executable
FAIL: libgomp.fortran/use_device_ptr-optional-3.f90 -Os (test for excess errors)
UNRESOLVED: libgomp.fortran/use_device_ptr-optional-3.f90 -Os compilation failed to produce executable
... due to:
/tmp/cciVc43I.o:(.gnu.offload_vars+0x10): undefined reference to `A.12.4064'
[...]
..., but after the recent PR94848, PR95551 changes, that problem is now gone.
libgomp/
PR lto/94848
* testsuite/libgomp.fortran/use_device_ptr-optional-3.f90: Add
'dg-do run'.
This upgrades the compiler to emit HSA Code Object v3 binaries. This means
changing the assembler directives, and linker command line options.
The gcn-run and libgomp loaders need corresponding alterations. The
relocations no longer need to be fixed up manually, and the kernel symbol
names have changed slightly.
This move makes the binaries compatible with the new rocgdb from ROCm 3.5.
2020-06-17 Andrew Stubbs <ams@codesourcery.com>
gcc/
* config/gcn/gcn-hsa.h (TEXT_SECTION_ASM_OP): Use ".text".
(BSS_SECTION_ASM_OP): Use ".bss".
(ASM_SPEC): Remove "-mattr=-code-object-v3".
(LINK_SPEC): Add "--export-dynamic".
* config/gcn/gcn-opts.h (processor_type): Replace PROCESSOR_VEGA with
PROCESSOR_VEGA10 and PROCESSOR_VEGA20.
* config/gcn/gcn-run.c (HSA_RUNTIME_LIB): Use ".so.1" variant.
(load_image): Remove obsolete relocation handling.
Add ".kd" suffix to the symbol names.
* config/gcn/gcn.c (MAX_NORMAL_SGPR_COUNT): Set to 62.
(gcn_option_override): Update gcn_isa test.
(gcn_kernel_arg_types): Update all the assembler directives.
Remove the obsolete options.
(gcn_conditional_register_usage): Update MAX_NORMAL_SGPR_COUNT usage.
(gcn_omp_device_kind_arch_isa): Handle PROCESSOR_VEGA10 and
PROCESSOR_VEGA20.
(output_file_start): Rework assembler file header.
(gcn_hsa_declare_function_name): Rework kernel metadata.
* config/gcn/gcn.h (GCN_KERNEL_ARG_TYPES): Set to 16.
* config/gcn/gcn.opt (PROCESSOR_VEGA): Remove enum.
(PROCESSOR_VEGA10): New enum value.
(PROCESSOR_VEGA20): New enum value.
libgomp/
* plugin/plugin-gcn.c (init_environment_variables): Use ".so.1"
variant for HSA_RUNTIME_LIB name.
(find_executable_symbol_1): Delete.
(find_executable_symbol): Delete.
(init_kernel_properties): Add ".kd" suffix to symbol names.
(find_load_offset): Delete.
(create_and_finalize_hsa_program): Remove relocation handling.
gcc/fortran/ChangeLog
* parse.c (decode_oacc_directive): Permit 'acc routine' also
inside pure procedures.
* openmp.c (gfc_match_oacc_routine): Inside pure procedures
do not permit gang, worker or vector clauses.
libgomp/ChangeLog:
* testsuite/libgomp.oacc-fortran/routine-10.f90: New test.
gcc/testsuite/ChangeLog:
* gfortran.dg/goacc/pure-elemental-procedures-2.f90: New test.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
These are not itself necessary for OpenACC 'exit data' directives, and are
skipped over (now) in libgomp. We might as well not emit them to start with,
in line with the equivalent OpenMP directive. We keep the no-op handling in
libgomp for the reason of backward compatibility.
gcc/
* gimplify.c (gimplify_adjust_omp_clauses): Remove
'GOMP_MAP_STRUCT' mapping from OpenACC 'exit data' directives.
gcc/testsuite/
* c-c++-common/goacc/struct-enter-exit-data-1.c: New file.
libgomp/
* oacc-mem.c (goacc_exit_data_internal) <GOMP_MAP_STRUCT>: Explain
special handling.
Co-Authored-By: Julian Brown <julian@codesourcery.com>
libgomp/
* testsuite/libgomp.oacc-c-c++-common/struct-copyout-1.c: New test.
* testsuite/libgomp.oacc-c-c++-common/struct-copyout-2.c: New test.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
Currently, we don't at all evaluate 'copyfrom' for 'GOMP_MAP_STRUCT' entries.
Fix this by copying/adapting the corresponding non-'GOMP_MAP_STRUCT' code.
libgomp/
* oacc-mem.c (goacc_exit_data_internal) <GOMP_MAP_STRUCT>:
Evaluate 'copyfrom' individually for each entry.
* testsuite/libgomp.oacc-c-c++-common/struct-1.c: Update.
Currently, we don't at all evaluate 'finalize' for 'GOMP_MAP_STRUCT' entries.
Fix this by copying/adapting the corresponding non-'GOMP_MAP_STRUCT' code.
libgomp/
* oacc-mem.c (goacc_exit_data_internal) <GOMP_MAP_STRUCT>:
Evaluate 'finalize' individually for each entry.
* testsuite/libgomp.oacc-c-c++-common/struct-1.c: New file.
* testsuite/libgomp.oacc-c-c++-common/struct-refcount-1.c: Remove
file.
libgomp/
* oacc-mem.c (goacc_enter_datum): Use 'tgt' returned from
'gomp_map_vars'.
(acc_map_data): Clean up accordingly.
Co-Authored-By: Julian Brown <julian@codesourcery.com>
If, for example, GCC is configured such that 'libgomp-plugin-nvptx.so.1'
dynamically links against 'libcuda.so.1', but testing is run on a system where
there is no 'libcuda.so.1', this produces output such as:
PASS: libgomp.oacc-fortran/error_stop-1.f -DACC_DEVICE_TYPE_host=1 -DACC_MEM_SHARED=1 -foffload=disable -O0 (test for excess errors)
PASS: libgomp.oacc-fortran/error_stop-1.f -DACC_DEVICE_TYPE_host=1 -DACC_MEM_SHARED=1 -foffload=disable -O0 execution test
FAIL: libgomp.oacc-fortran/error_stop-1.f -DACC_DEVICE_TYPE_host=1 -DACC_MEM_SHARED=1 -foffload=disable -O0 output pattern test, is CheCKpOInT
libgomp: while loading libgomp-plugin-nvptx.so.1: libcuda.so.1: cannot open shared object file: No such file or directory
ERROR STOP
Error termination. Backtrace: [...]
, should match CheCKpOInT(
|
|^M)+ERROR STOP (
|
|^M)+Error termination.*
..., where after 'CheCKpOInT' we got 'libgomp: while loading [...]' injected
before the expected 'ERROR STOP'.
libgomp/
* testsuite/libgomp.oacc-fortran/error_stop-1.f: Initialize before
the checkpoint.
* testsuite/libgomp.oacc-fortran/error_stop-2.f: Likewise.
* testsuite/libgomp.oacc-fortran/error_stop-3.f: Likewise.
* testsuite/libgomp.oacc-fortran/stop-1.f: Likewise.
* testsuite/libgomp.oacc-fortran/stop-2.f: Likewise.
* testsuite/libgomp.oacc-fortran/stop-3.f: Likewise.
