2014-06-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61640
* io/list_read.c (next_char_internal): Adjust the read length to
a single wide character. (eat_spaces): Add missing paren.
* io/unix.c (mem_read4): Use the correct mem_alloc function for
wide character internal reads.
From-SVN: r212118
PR fortran/29383
gcc/fortran/
* gfortran.h (gfc_simplify_ieee_selected_real_kind): New prototype.
* libgfortran.h (GFC_FPE_*): Use simple integer values, valid in
both C and Fortran.
* expr.c (gfc_check_init_expr): Simplify IEEE_SELECTED_REAL_KIND.
* simplify.c (gfc_simplify_ieee_selected_real_kind): New function.
* module.c (mio_symbol): Keep track of symbols which came from
intrinsic modules.
(gfc_use_module): Keep track of the IEEE modules.
* trans-decl.c (gfc_get_symbol_decl): Adjust code since
we have new intrinsic modules.
(gfc_build_builtin_function_decls): Build decls for
ieee_procedure_entry and ieee_procedure_exit.
(is_from_ieee_module, is_ieee_module_used, save_fp_state,
restore_fp_state): New functions.
(gfc_generate_function_code): Save and restore floating-point
state on procedure entry/exit, when IEEE modules are used.
* intrinsic.texi: Document the IEEE modules.
libgfortran/
* configure.host: Add checks for IEEE support, rework priorities.
* configure.ac: Define IEEE_SUPPORT, check for fpsetsticky and
fpresetsticky.
* configure: Regenerate.
* Makefile.am: Build new ieee files, install IEEE_* modules.
* Makefile.in: Regenerate.
* gfortran.map (GFORTRAN_1.6): Add new symbols.
* libgfortran.h (get_fpu_trap_exceptions, set_fpu_trap_exceptions,
support_fpu_trap, set_fpu_except_flags, support_fpu_flag,
support_fpu_rounding_mode, get_fpu_state, set_fpu_state): New
prototypes.
* config/fpu-*.h (get_fpu_trap_exceptions,
set_fpu_trap_exceptions, support_fpu_trap, set_fpu_except_flags,
support_fpu_flag, support_fpu_rounding_mode, get_fpu_state,
set_fpu_state): New functions.
* ieee/ieee_features.F90: New file.
* ieee/ieee_exceptions.F90: New file.
* ieee/ieee_arithmetic.F90: New file.
* ieee/ieee_helper.c: New file.
gcc/testsuite/
* lib/target-supports.exp (check_effective_target_fortran_ieee):
New function.
* gfortran.dg/ieee/ieee.exp: New file.
* gfortran.dg/ieee/ieee_1.F90: New file.
* gfortran.dg/ieee/ieee_2.f90: New file.
* gfortran.dg/ieee/ieee_3.f90: New file.
* gfortran.dg/ieee/ieee_4.f90: New file.
* gfortran.dg/ieee/ieee_5.f90: New file.
* gfortran.dg/ieee/ieee_6.f90: New file.
* gfortran.dg/ieee/ieee_7.f90: New file.
* gfortran.dg/ieee/ieee_rounding_1.f90: New file.
From-SVN: r212102
2014-06-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61499
* io/list_read.c (eat_spaces): Use a 'for' loop instead of
'while' loop to skip the loop if there are no bytes left in the
string. Only seek if actual spaces can be skipped.
From-SVN: r212059
2014-05-26 Tobias Burnus <burnus@net-b.de>
PR fortran/55117
* trans-io.c (nml_full_name, transfer_namelist_element): Insert
a '+' rather then '%' to differentiate namelist variable names
that are based on extended derived types.
2014-05-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/55117
* io/list_read.c (extended_look_ahead): New helper function to
scan the namelist name and look for matches with the new '+'
extended type parent indicator. (str_comp_extended): New
helper function to compare the namelist name with the varname
namelist. (find_nml_name): Use the new helper functions to match
the extended type varnames.
From-SVN: r210934
2014-05-23 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/61173
* io/list_read.c (eat_spaces): If the next character pointed to
is a space, don't seek, must be at the end.
From-SVN: r210898
2014-05-17 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/52539
* io/io.h (gfc_unit): New function pointers *next_char_fn_ptr
and *push_char_fn_ptr.
*io/list_read.c (next_char): Create macro with this name to call
the new function pointer. Split the original next_char function
into three new functions. (next_char_default, next_char_internal,
next_char_utf8): New functions. (push_char): Create macro with
this name to call new function pointer. Split the original
push_char into three new functions. (push_char_default,
push_char_internal, push_char4): New functions. (set_workers):
New function to initilize the function pointers depending on the
type of IO to be performed. (list_formatted_read_scalar): Use
set_workers function. (finish_list_read): Likewise.
(namelist_read): Likewise.
(nml_get_obj_data): Use push_char_default.
From-SVN: r210574
2014-05-16 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/61187
* io/unix.c (raw_close): Check if s->fd is -1.
(fd_to_stream): Check return value of fstat(), handle error.
From-SVN: r210527
2014-05-12 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/61035
* intrinsics/getcwd.c (getcwd_i4_sub): Avoid potentially large
stack allocation, avoid extra copying in the common case.
From-SVN: r210335
2014-05-11 Tobias Burnus <burnus@net-b.de>
* trans-intrinsic.c (gfc_build_builtin_function_decls):
Change type of second argument to int.
2014-05-11 Tobias Burnus <burnus@net-b.de>
* caf/libcaf.h (_gfortran_caf_num_images): Change type of
second argument to int.
* caf/mpi.c (_gfortran_caf_num_images): Ditto.
* caf/single.c (_gfortran_caf_num_images): Ditto.
From-SVN: r210311
2014-04-26 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/52539
* io/list_read.c: Add uchar typedef. (push_char4): New function
to save kind=4 character. (next_char_utf8): New function to read
a single UTF-8 encoded character value. (read_chracter): Update
to use the new functions for reading UTF-8 strings.
(list_formatted_read_scalar): Update to handle list directed
reads of UTF-8 strings. (nml_read_obj): Likewise update for
UTF-8 strings in namelists.
* io/write.c (nml_write_obj): Add kind=4 character support for
namelist writes.
From-SVN: r209828
2014-03-21 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/60148
* io/transfer.c (data_transfer_init): If std= was specified, set
delim status to DELIM_NONE of no other was specified.
From-SVN: r208759
2014-03-17 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/46800
* io/list_read.c (list_formatted_read_scalar): Do not use
eat_separator. Explicitly set the comma and end-of-line flags.
Check for END condition from finish_separator.
From-SVN: r208629
2014-03-15 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/58324
* io/list_read.c (finish_list_read): Read one character to check
for the end of the file. If it is the end, then issue the file
end error message. If not, use eat_line to reach the end
without giving error. The next attempt to read will then
issue the error as described above.
From-SVN: r208591
2014-03-12 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/38199
* io/read.c (read_decimal): Quickly skip spaces to avoid calls
to next_char.
* io/unit.c (is_trim_ok): New helper function to check various
conditions to see if its OK to trim the internal unit string.
(get_internal_unit): Use LEN_TRIM to shorten selected internal
unit strings for optimizing READ. Enable this optimization for
formatted READ.
* io/list_read.c (finish_list_read): Don't call eat_line for
internal units.
From-SVN: r208528
2014-03-08 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/38199
* io/list_read.c (next_char): Mark unlikely error checks.
(eat_spaces): For character array reading, skip ahead over
spaces rather than call next_char multiple times.
From-SVN: r208439
2014-03-08 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/38199
* io/list_read.c (next_char): Delete unuseful error checks.
(eat_spaces): For character array reading, skip ahead over
spaces rather than call next_char multiple times.
From-SVN: r208438
2014-03-08 Dominique d'Humieres <dominiq@lps.ens.fr>
PR libgfortran/60128
* io/write_float.def (output_float): Remove unused variable
nzero_real. Replace a double space with a single one.
(determine_en_precision): Fix wrong handling of the EN format.
PR libfortran/60128
* gfortran.dg/fmt_en.f90: New test.
From-SVN: r208423
2014-03-03 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/60148
* io/inquire.c (inquire_via_unit): In the case of
DELIM_UNSPECIFIED set inquire return string to "NONE".
* io/list_read.c (read_character): In the case of DELIM_NONE and
namelists, complete the character read using the namelist
variable length.
* io/open.c (new_unit): Don't set delim status to none if not
specified so that DELIM_UNSPECIFIED can be used later.
* io/transfer.c (data_transfer_init): For namelist I/O, if the
unit delim status is unspecified set the current status to quote.
Otherwise, set current status to the unit status.
* io/unit.c (get_internel_unit, init_unit): Remember to set
flags_delim initially to DELIM_UNSPECIFIED so defaults come out
correctly.
* io/write.c (write_character): Add a new function argument
"mode" to signify that raw output is to be used vs output with
delimiters. If the mode is set to DELIM (1) proceed with
delimiters. (list_formatted_write_scalar): Write the separator
only if a delimiter was previously specified. Update the call to
write_character with the mode argument given.
(namelist_write_newline): Use the mode argument. (nml_write_obj):
Use the mode argument. Remove use of tmp_delim. Write the
semi-colon or comma correctly only when needed with using
delimiters. Cleanup whitespace.
(namelist_write): If delim is not specified in namelist I/O,
default to using quotes. Get rid of the tmp_delim variable and
use the new mode argument in write_character.
From-SVN: r208302
2014-02-21 Tobias Burnus <burnus@net-b.de>
PR fortran/60286
* libgfortran/io/inquire.c (yes, no): New static const char
* vars.
(inquire_via_unit): Use them. Use OPEN mode instead of using
POSIX's access to query about write=, read= and readwrite=.
2014-02-21 Tobias Burnus <burnus@net-b.de>
PR fortran/60286
* gfortran.dg/inquire_16.f90: New.
From-SVN: r207979
2014-01-11 Jerry DeLisle <jvdelisle@gcc.gnu>
Dominique d'Humieres <dominiq@lps.ens.fr>
Steven G. Kargl <kargl@gcc.gnu.org>
PR libfortran/59700
PR libfortran/59764
* io/io.h (struct st_parameter_dt): Assign expanded_read flag to
unused bit. Define new variable line_buffer_pos.
* io/list_read.c (free_saved, next_char, l_push_char,
read_logical, read_real): Replace use of item_count with
line_buffer_pos for line_buffer look ahead.
(read_logical, read_integer, parse_real, read_real, check_type):
Adjust location of free_line to after generating error messages
to retain the correct item count for the message.
Co-Authored-By: Dominique d'Humieres <dominiq@lps.ens.fr>
Co-Authored-By: Steven G. Kargl <kargl@gcc.gnu.org>
From-SVN: r206553
