PR c/89410 reports various issues with #line directives with very
large numbers; one of them is an ICE inside diagnostic-show-locus.c
when emitting a diagnostic at line 0xffffffff.
The issue is that the arithmetic in layout::calculate_line_spans to
determine if two line spans are sufficiently close to consolidate
was using the unsigned 32-bit linenum_type, which was overflowing
when comparing the line for the expanded location with those of
the location range (all on line 0xffffffff), leading to it
erroneously adding two spans for the same line, leading to an
assertion failure.
This patch fixes the ICE by generalizing the use of long long in
line-map.h's comparison function for linenum_type into a new
linenum_arith_t typedef, and using it here.
Doing so uncovered a second problem: the loop to print the lines
within the line_span for this case is infinite: looping from
0xfffffff upwards, overflowing to 0, and then never becoming
greater than 0xfffffff. The patch fixes this by using linenum_arith_t
there also.
gcc/ChangeLog:
PR c/89410
* diagnostic-show-locus.c (layout::calculate_line_spans): Use
linenum_arith_t when determining if two adjacent line spans are
close enough to merge.
(diagnostic_show_locus): Use linenum_arith_t when iterating over
lines within each line_span.
gcc/testsuite/ChangeLog:
PR c/89410
* gcc.dg/pr89410-1.c: New test.
* gcc.dg/pr89410-2.c: New test.
libcpp/ChangeLog:
PR c/89410
* include/line-map.h (linenum_arith_t): New typedef.
(compare): Use it.
From-SVN: r269050
PR lto/88147 reports an assertion failure due to a bogus location_t value
when adding a line to a pre-existing line map, when there's a large
difference between the two line numbers.
For some "large differences", this leads to a location_t value that exceeds
LINE_MAP_MAX_LOCATION, in which case linemap_line_start returns 0. This
isn't ideal, but at least should lead to safe degradation of location
information.
However, if the difference is very large, it's possible for the line
number offset (relative to the start of the map) to be sufficiently large
that overflow occurs when left-shifted by the column-bits, and hence
the check against the LINE_MAP_MAX_LOCATION limit fails, leading to
a seemingly-valid location_t value, but encoding the wrong location. This
triggers the assertion failure:
linemap_assert (SOURCE_LINE (map, r) == to_line);
The fix (thanks to Martin) is to check for overflow when determining
whether to reuse an existing map, and to not reuse it if it would occur.
gcc/ChangeLog: David Malcolm <dmalcolm@redhat.com>
PR lto/88147
* input.c (selftest::test_line_offset_overflow): New selftest.
(selftest::input_c_tests): Call it.
libcpp/ChangeLog: Martin Liska <mliska@suse.cz>
PR lto/88147
* line-map.c (linemap_line_start): Don't reuse the existing line
map if the line offset is sufficiently large to cause overflow
when computing location_t values.
From-SVN: r268789
gcc/ChangeLog:
2018-11-27 Mike Gulick <mgulick@mathworks.com>
PR preprocessor/83173
* input.c (dump_location_info): Dump reason and included_from
fields from line_map_ordinary struct. Fix indentation when
location > 5 digits.
* diagnostic-show-locus.c (num_digits, num_digits): Move to
diagnostic.c to allow it to be utilized by input.c.
* diagnostic.c (num_digits, selftest::test_num_digits): Moved
here.
(selftest::diagnostic_c_tests): Run selftest::test_num_digits.
* diagnostic.h (num_digits): Add extern definition.
libcpp/ChangeLog:
2018-11-27 Mike Gulick <mgulick@mathworks.com>
PR preprocessor/83173
* location-example.txt: Update example -fdump-internal-locations
output.
From-SVN: r266520
2018-11-27 Mike Gulick <mgulick@mathworks.com>
PR preprocessor/83173
* files.c (_cpp_stack_include): Check if
line_table->highest_location is past current line before
decrementing.
From-SVN: r266516
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
Now new features are starting to be added to a C2X draft (in the C2x
branch of the C standard git repository, no public WG14 document yet),
it's time to add -std=c2x and associated options to GCC for use in
enabling C2X features.
This patch adds the expected set of options: -std=c2x, -std=gnu2x,
-Wc11-c2x-compat. A first C2X feature is added (the only one so far
in the repository that's obviously relevant to GCC): support (as in
C++) for the string constant to be omitted in _Static_assert. This
feature is duly also supported as an extension in earlier standard
modes (diagnosed with -pedantic, unless -Wno-c11-c2x-compat is given,
or with -Wc11-c2x-compat even in C2X mode).
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
gcc/
* doc/cpp.texi (__STDC_VERSION__): Document C2X handling.
* doc/invoke.texi (-std=c2x, -std=gnu2x): Document new options.
* doc/standards.texi (C Language): Document C2X.
* dwarf2out.c (highest_c_language), config/rl78/rl78.c
(rl78_option_override): Handle "GNU C2X" language name.
gcc/c/
* c-errors.c (pedwarn_c11): New function.
* c-parser.c (disable_extension_diagnostics): Save
warn_c11_c2x_compat and set it to 0.
(restore_extension_diagnostics): Restore warn_c11_c2x_compat.
(c_parser_static_assert_declaration_no_semi): Handle
_Static_assert without string constant.
* c-tree.h (pedwarn_c11): New prototype.
gcc/c-family/
* c-common.c (flag_isoc2x): New variable.
* c-common.h (clk_c): Update comment to reference C2X.
(flag_isoc99, flag_isoc11): Update comments to reference future
standard versions in general.
(flag_isoc2x): Declare.
* c-opts.c (set_std_c2x): New function.
(c_common_handle_option): Handle -std=c2x and -std=gnu2x.
(set_std_c89, set_std_c99, set_std_c11, set_std_c17): Set
flag_isoc2x to 0.
* c.opt (Wc11-c2x-compat, std=c2x, std=gnu2x): New options.
gcc/testsuite/
* gcc.dg/c11-static-assert-7.c, gcc.dg/c11-static-assert-8.c,
gcc.dg/c11-static-assert-9.c, gcc.dg/c2x-static-assert-1.c,
gcc.dg/c2x-static-assert-2.c, gcc.dg/c99-static-assert-2.c,
gcc.dg/gnu2x-static-assert-1.c: New tests.
* gcc.dg/missing-symbol-3.c: Update expected fix-it text.
libcpp/
* include/cpplib.h (enum c_lang): Add CLK_GNUC2X and CLK_STDC2X.
* init.c (lang_defaults): Add GNUC2X and STDC2X entries.
(cpp_init_builtins): Define __STDC_VERSION__ to 202000L for C2X.
From-SVN: r265251
Consider:
demo.c: In function 'test':
demo.c:5:40: error: macro "LOG_2" requires 3 arguments, but only 2 given
5 | LOG_2 ("loading file: %s\n", filename);
| ^
This patch adds a note showing the definition of the macro in
question, giving:
demo.c: In function 'test':
demo.c:5:40: error: macro "LOG_2" requires 3 arguments, but only 2 given
5 | LOG_2 ("loading file: %s\n", filename);
| ^
In file included from demo.c:1:
logging.h:1: note: macro "LOG_2" defined here
1 | #define LOG_2(FMT, ARG0, ARG1) do { fprintf (stderr, (FMT), (ARG0), (ARG1)); }
|
gcc/testsuite/ChangeLog:
* g++.dg/diagnostic/macro-arg-count.C: Move to...
* c-c++-common/cpp/macro-arg-count-1.c: ...here, generalizing
output for C vs C++. Expect notes showing the definitions of the
macros.
* c-c++-common/cpp/macro-arg-count-2.c: New test, adapted from the
above.
libcpp/ChangeLog:
* macro.c (_cpp_arguments_ok): If the argument count is wrong, add
a note showing the definition of the macro.
From-SVN: r265040
https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00623.html
* include/line-map.h (LINEMAPS_MACRO_LOWEST_LOCATION): Fix
off-by-one error.
* line-map.c (linemap_enter_macro): Use RAII. Clear all of the
macro_locations.
From-SVN: r265037
This patch renames the "error" callback within libcpp
to "diagnostic", and uses the pair of enums in cpplib.h, rather
than passing two different kinds of "int" around.
gcc/c-family/ChangeLog:
* c-common.c (c_option_controlling_cpp_error): Rename to...
(c_option_controlling_cpp_diagnostic): ...this, and convert
"reason" from int to enum.
(c_cpp_error): Rename to...
(c_cpp_diagnostic): ...this, converting level and reason to enums.
* c-common.h (c_cpp_error): Rename to...
(c_cpp_diagnostic): ...this, converting level and reason to enums.
* c-opts.c (c_common_init_options): Update for renaming.
gcc/fortran/ChangeLog:
* cpp.c (gfc_cpp_init_0): Update for renamings.
(cb_cpp_error): Rename to...
(cb_cpp_diagnostic): ...this, converting level and reason to
enums.
gcc/ChangeLog:
* genmatch.c (error_cb): Rename to...
(diagnostic_cb): ...this, converting int params to enums.
(fatal_at): Update for renaming.
(warning_at): Likewise.
(main): Likewise.
* input.c (selftest::ebcdic_execution_charset::apply):
Update for renaming of...
(selftest::ebcdic_execution_charset::on_error): ...this, renaming
to...
(selftest::ebcdic_execution_charset::on_diagnostic): ...this,
converting level and reason to enums.
(class selftest::lexer_error_sink): Rename to...
(class selftest::lexer_test_options): ...this, renaming field
"m_errors" to "m_diagnostics".
(selftest::lexer_test_options::apply): Update for renaming of...
(selftest::lexer_test_options::on_error): ...this, renaming to...
(selftest::lexer_test_options::on_diagnostic): ...this
converting level and reason to enums.
(selftest::test_lexer_string_locations_raw_string_unterminated):
Update for renamings.
* opth-gen.awk (struct cpp_reason_option_codes_t): Use enum for
"reason".
libcpp/ChangeLog:
* charset.c (noop_error_cb): Rename to...
(noop_diagnostic_cb): ...this, converting params to enums.
(cpp_interpret_string_ranges): Update for renaming and enums.
* directives.c (check_eol_1): Convert reason to enum.
(do_diagnostic): Convert code and reason to enum.
(do_error): Use CPP_W_NONE rather than 0.
(do_pragma_dependency): Likewise.
* errors.c (cpp_diagnostic_at): Convert level and reason to enums.
Update for renaming.
(cpp_diagnostic): Convert level and reason to enums.
(cpp_error): Convert level to enum.
(cpp_warning): Convert reason to enums.
(cpp_pedwarning): Likewise.
(cpp_warning_syshdr): Likewise.
(cpp_diagnostic_with_line): Convert level and reason to enums.
Update for renaming.
(cpp_error_with_line): Convert level to enum.
(cpp_warning_with_line): Convert reason to enums.
(cpp_pedwarning_with_line): Likewise.
(cpp_warning_with_line_syshdr): Likewise.
(cpp_error_at): Convert level to enum.
(cpp_errno): Likewise.
(cpp_errno_filename): Likewise.
* include/cpplib.h (enum cpp_diagnostic_level): Name this enum,
and move to before struct cpp_callbacks.
(enum cpp_warning_reason): Likewise.
(cpp_callbacks::diagnostic): Convert params from int to enums.
(cpp_error): Convert int param to enum cpp_diagnostic_level.
(cpp_warning): Convert int param to enum cpp_warning_reason.
(cpp_pedwarning): Likewise.
(cpp_warning_syshdr): Likewise.
(cpp_errno): Convert int param to enum cpp_diagnostic_level.
(cpp_errno_filename): Likewise.
(cpp_error_with_line): Likewise.
(cpp_warning_with_line): Convert int param to enum
cpp_warning_reason.
(cpp_pedwarning_with_line): Likewise.
(cpp_warning_with_line_syshdr): Likewise.
(cpp_error_at): Convert int param to enum cpp_diagnostic_level.
* macro.c (create_iso_definition): Convert int to enum.
(_cpp_create_definition): Likewise.
From-SVN: r264999
This patch updates the pure virtual function range_label::get_text
(and its implementations) so that the index of the range is passed
in, allowing for one label instance to be shared by multiple ranges.
gcc/c-family/ChangeLog:
* c-format.c (range_label_for_format_type_mismatch::get_text):
Update for new param.
gcc/c/ChangeLog:
* c-objc-common.c (range_label_for_type_mismatch::get_text):
Update for new param.
* c-typeck.c (maybe_range_label_for_tree_type_mismatch::get_text):
Likewise.
gcc/cp/ChangeLog:
* error.c (range_label_for_type_mismatch::get_text): Update for
new param.
gcc/ChangeLog:
* diagnostic-show-locus.c (class layout_range): Add field
"m_original_idx".
(layout_range::layout_range): Add "original_idx" param and use it
to initialize new field.
(make_range): Use 0 for original_idx.
(layout::layout): Pass in index to calls to
maybe_add_location_range.
(layout::maybe_add_location_range): Add param "original_idx" and
pass it on to layout_range.
(layout::print_any_labels): Pass on range->m_original_idx to
get_text call.
(gcc_rich_location::add_location_if_nearby): Use 0 for
original_idx.
* gcc-rich-location.h (text_range_label::get_text): Update for new
param.
(range_label_for_type_mismatch::get_text): Likewise.
libcpp/ChangeLog:
* include/line-map.h (range_label::get_text): Add param
"range_idx".
From-SVN: r264376
This patch tweaks maybe_add_include_fixit so that if we're emitting a note
about adding the header file, the note's primary location will be replaced
by that of the fix-it hint, to avoid repeating a location we've already
emitted (or one close to it).
For example, this simplifies:
../x86_64-pc-linux-gnu/libstdc++-v3/include/vector:87:27: error: msg 1
87 | using vector = std::vector<_Tp, polymorphic_allocator<_Tp>>;
| ^~~~~~
../x86_64-pc-linux-gnu/libstdc++-v3/include/vector:87:22: note: msg 2
73 | # include <debug/vector>
+++ |+#include <vector>
74 | #endif
....
87 | using vector = std::vector<_Tp, polymorphic_allocator<_Tp>>;
| ^~~
to:
../x86_64-pc-linux-gnu/libstdc++-v3/include/vector:87:27: error: msg 1
87 | using vector = std::vector<_Tp, polymorphic_allocator<_Tp>>;
| ^~~~~~
../x86_64-pc-linux-gnu/libstdc++-v3/include/vector:74:1: note: msg 2
73 | # include <debug/vector>
+++ |+#include <vector>
74 | #endif
eliminating the repetition of line 87 in the note.
Doing so requires converting show_caret_p to a tri-state, to avoid
meaninglessly printing a caret for the first column in the next line
(and colorizing it):
../x86_64-pc-linux-gnu/libstdc++-v3/include/vector:74:1: note: msg 2
73 | # include <debug/vector>
+++ |+#include <vector>
74 | #endif
| ^
gcc/c-family/ChangeLog:
PR 87091
* c-common.c (c_cpp_error): Update for conversion of show_caret_p
to a tri-state.
(maybe_suggest_missing_token_insertion): Likewise.
(maybe_add_include_fixit): Add param "override_location". If set,
and source-printing is enabled, then override the rich_location's
primary location with that of the insertion point for the fix-it
hint, marking it with SHOW_LINES_WITHOUT_RANGE.
* c-common.h (extern void maybe_add_include_fixit): Add bool
param.
* c-format.c (selftest::test_type_mismatch_range_labels): Update
for conversion of show_caret_p to a tri-state.
* c-warn.c (warn_for_restrict): Likewise.
* known-headers.cc
(suggest_missing_header::~suggest_missing_header): Update call to
maybe_add_include_fixit to suggest overriding the location, as it
is for a note.
gcc/c/ChangeLog:
PR 87091
* c-decl.c (implicitly_declare): Update call to
maybe_add_include_fixit to suggest overriding the location, as it
is for a note.
* c-objc-common.c (c_tree_printer): Update for conversion of
show_caret_p to a tri-state.
gcc/cp/ChangeLog:
PR 87091
* decl.c (grokdeclarator): Update for conversion of show_caret_p
to a tri-state.
* error.c (cp_printer): Likewise.
* name-lookup.c (maybe_suggest_missing_std_header): Update call to
maybe_add_include_fixit to suggest overriding the location, as it
is for a note.
* parser.c (cp_parser_string_literal): Update for conversion of
show_caret_p to a tri-state.
(cp_parser_elaborated_type_specifier): Likewise.
(set_and_check_decl_spec_loc): Likewise.
* pt.c (listify): Update call to maybe_add_include_fixit to not
override the location, as it is for an error.
* rtti.c (typeid_ok_p): Likewise.
gcc/ChangeLog:
PR 87091
* diagnostic-show-locus.c (class layout_range): Update for
conversion of show_caret_p to a tri-state.
(layout_range::layout_range): Likewise.
(make_range): Likewise.
(layout::maybe_add_location_range): Likewise.
(layout::should_print_annotation_line_p): Don't show annotation
lines for ranges that are SHOW_LINES_WITHOUT_RANGE.
(layout::get_state_at_point): Update for conversion of
show_caret_p to a tri-state. Bail out early for
SHOW_LINES_WITHOUT_RANGE, so that such ranges don't affect
underlining or source colorization.
(gcc_rich_location::add_location_if_nearby): Update for conversion
of show_caret_p to a tri-state.
(selftest::test_one_liner_multiple_carets_and_ranges): Likewise.
(selftest::test_one_liner_fixit_replace_equal_secondary_range):
Likewise.
(selftest::test_one_liner_labels): Likewise.
* gcc-rich-location.c (gcc_rich_location::add_expr): Update for
conversion of show_caret_p to a tri-state.
* pretty-print.c (text_info::set_location): Likewise.
* pretty-print.h (text_info::set_location): Likewise.
* substring-locations.c (format_warning_n_va): Likewise.
* tree-diagnostic.c (default_tree_printer): Likewise.
* tree-pretty-print.c (newline_and_indent): Likewise.
gcc/fortran/ChangeLog:
PR 87091
* error.c (gfc_format_decoder): Update for conversion of
show_caret_p to a tri-state.
gcc/testsuite/ChangeLog:
PR 87091
* gcc.dg/empty.h: New file.
* gcc.dg/fixits-pr84852-1.c: Update for move of fix-it hint to
top of file and removal of redundant second printing of warning
location.
* gcc.dg/fixits-pr84852-2.c: Likewise.
* gcc.dg/missing-header-fixit-3.c: Likewise.
* gcc.dg/missing-header-fixit-4.c: New test.
* gcc.dg/plugin/diagnostic_plugin_test_show_locus.c: Update for
conversion of show_caret_p to a tri-state.
libcpp/ChangeLog:
PR 87091
* include/line-map.h (enum range_display_kind): New enum.
(struct location_range): Replace field "m_show_caret_p" with
"m_range_display_kind", converting from bool to the new enum.
(class rich_location): Add example of line insertion fix-it hint.
(rich_location::add_range): Convert param "show_caret_p" from bool
to enum range_display_kind and rename to "range_display_kind",
giving it a default of SHOW_RANGE_WITHOUT_CARET.
(rich_location::set_range): Likewise, albeit without a default.
* line-map.c (rich_location::rich_location): Update for conversion
of show_caret_p to tri-state enum.
(rich_location::add_range): Likewise.
(rich_location::set_range): Likewise.
From-SVN: r263885
With profiledbootstrap and --with-build-config=bootstrap-lto, linemap_add
may create a macro map when we run out of line map space. This patch
changes start_location to UNKNOWN_LOCATION (0) in this case.
Tested with profiledbootstrap and --with-build-config=bootstrap-lto on
Linux/x86-64.
PR bootstrap/86872
* line-map.c (pure_location_p): Return true if linemap_lookup
returns NULL.
(linemap_add): Set start_location to 0 if we run out of line map
space.
From-SVN: r263845
https://gcc.gnu.org/ml/gcc-patches/2018-08/msg01164.html
* include/cpplib.h (NODE_BUILTIN, NODE_MACRO_ARG): Delete.
Renumber others.
(enum node_type): Replace NT_MACRO with NT_USER_MACRO,
NT_BUILTIN_MACRO, NT_MACRO_ARG. Delete NT_ASSERTION.
(NTV_MACRO, NTV_ANSWER, NTV_BUILTIN, NTV_ARGUMENT, NTV_NONE):
Delete.
(CPP_HASHNODE_VALUE_IDX): Delete.
(union _cpp_hashnode_value): GTY tag from enum node_type directly.
(struct cpp_hashnode): Adjust GTY desc for value field.
(cpp_user_macro_p, cpp_builtin_macro_p, cpp_macro_p): Adjust.
* directives.c (undefine_macros): Clear value.anwers, adjust flag
clearing.
(_cpp_test_assertion): No need to check NT_ASSERTION.
(do_assert, do_unassert): Likewise.
* init.c (cpp_init_special_builtins): Set type not flags.
* macro.c (struct macro_arg_saved_data): Add type field.
(cpp_get_token_1): Check type not NT_VOID.
(_cpp_free_definition): Adjust flag clearing. Nullify
value.answers.
(_cpp_save_parameter, _cpp_unsave_parameters): Save and restore
type.
(lex_expansion_token): Check type not flags.
(_cpp_create_definition): Set type to NT_USER_MACRO.
(_cpp_notify_macro_use): Adjust type checking.
* pch.c (write_macdef, count_defs, write_defs, cpp_valid_state)
(save_macros): Adjust node type/flag handling.
* traditional.c (_cpp_scan_out_logical_line): Check type not flags.
From-SVN: r263667
