* configure.ac (--enable-gold): Support both, both/gold and
both/bfd to add gold to configdirs without removing ld.
* configure: Regenerated.
* Makefile.def: Add install-gold dependency to install-ld.
* Makefile.in: Regenerated.
Co-Authored-By: H.J. Lu <hongjiu.lu@intel.com>
From-SVN: r158786
ChangeLog:
2010-04-27 Dave Korn <dave.korn.cygwin@gmail.com>
PR lto/42776
* configure.ac (--enable-lto): Refactor handling so libelf tests
are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
and allow LTO to be explicitly enabled on non-ELF platforms that
are known to support it inside else-clause.
* configure: Regenerate.
From-SVN: r158763
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* configure: Regenerate after change to elf.m4.
In config subdir:
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* elf.m4: Add hppa[12]*-*-hpux* to list of non-elf platforms.
From-SVN: r158285
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Print "buggy but acceptable" when CLooG
revision is less than 9.
* configure: Regenerated.
From-SVN: r157945
PR 11238
* Makefile.tpl (local-distclean): Also remove config.cache files in
sub-directories as there may not be Makefiles present in the
sub-directories.
* Makefile.in: Regenerate.
* configure.ac: Revert previous delta.
* configure: Regenerate.
From-SVN: r156826
PR libstdc++/36101, PR libstdc++/42813
* configure.ac (bootstrap_target_libs): Make inclusion of
target-libgomp conditional on libgomb being in target_configdirs.
* configure: Regenerate.
From-SVN: r156218
2010-01-02 Richard Guenther <rguenther@suse.de>
PR lto/41529
* configure.ac: Include config/elf.m4. Disable LTO if not
builting for an elf target.
* configure: Regenerate.
config/
* elf.m4: New file.
From-SVN: r155565
2009-11-21 Sebastian Pop <sebpop@gmail.com>
* configure.ac: Check for version 0.15.5 or later revision of CLooG.
* configure: Regenerated.
From-SVN: r154635
./: * configure.ac: Change default of poststage1_ldflags to be empty if
poststage1_libs is set. When poststage1_libs is empty, and
ENABLE_BUILD_WITH_CXX is set, add -static-libgcc.
* configure: Rebuild.
gcc/:
* Makefile.in (HOST_LIBS): Move higher in file.
(LINKER, LINKER_FLAGS): If ENABLE_BUILD_WITH_CXX, but $(HOST_LIBS)
is not empty, set to $(CC) and $(CFLAGS).
From-SVN: r154422
* configure.ac: Add libelf to host_libs. Enable in-tree configury
of ppl and cloog. Fix in-tree configury of libelf, skip tests.
Fix portability of test of C++ as bootstrap language. Add
ppl/src/ppl-config.o to the bootstrap compare exclusion list.
* configure: Rebuild.
* Makefile.def: Drop host and target settings from gmp, mpfr, ppl,
and cloog. Fix in-tree ppl configuration. Introduce libelf
in-tree building.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): New.
(POSTSTAGE1_HOST_EXPORTS): Use it.
(STAGE[+id+]_CXXFLAGS): New.
(BASE_FLAGS_TO_PASS): Pass it down.
(configure-stage[+id+]-[+prefix+][+module+]): Use it. Add
extra_exports.
(all-stage[+id+]-[+prefix+][+module+]): Likewise.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
extra_exports.
* Makefile.in: Rebuild.
From-SVN: r154211
2009-10-30 Kai Tietz <kai.tietz@onevision.com>
* configure.ac: Disable target-winsup & co for
x86_64-*-mingw* and *-w64-mingw* targets.
* configure: Regenerated.
From-SVN: r153761
2009-10-22 Richard Guenther <rguenther@suse.de>
* configure.ac: Do not set LIBS for ppl/cloog checks. Disable
cloog if the ppl version check failed. Move flags saving
before setting in libelf check.
* configure: Regenerate.
From-SVN: r153447
2009-10-21 Richard Guenther <rguenther@suse.de>
* configure.ac: Adjust the ppl and cloog configure to work as
documented. Disable cloog if ppl was disabled. Omit the version
checks if they were disabled.
* configure: Re-generate.
From-SVN: r153055
/:
* configure.ac: Add 'lto' to enable_languages, not
new_enable_languages, and only if not already present.
* configure: Regenerate.
From-SVN: r152697
/:
* configure.ac: Do not use $extrasub for replacing @if/@endif
parts in Makefile; instead, use additional arguments to
AC_CONFIG_COMMANDS to do the replacement manually, with several
sed invocations, to avoid HP-UX sed command limits.
* configure: Regenerate.
From-SVN: r151525
ChangeLog:
* configure.ac (--with-build-config): New. Set BUILD_CONFIG.
Default to bootstrap-debug only if compare-debug works.
* configure: Rebuilt.
* Makefile.tpl: Make BUILD_CONFIG configure-configurable.
* Makefile.in: Rebuilt.
contrib/ChangeLog:
* bootstrap-debug-big.mk (STAGE2_CFLAGS): Drop -gtoggle.
* bootstrap-debug-lean.mk: Update comments.
(STAGE2_CFLAGS): Likewise.
(do-compare): Don't override.
gcc/ChangeLog:
* doc/invoke.texi (BUILD_CONFIG): Document --with-build-config.
(bootstrap-debug): Explain conditions in which it becomes default.
(bootstrap-debug-big): Rather than duplicate bootstrap-debug,
make it add to it.
From-SVN: r151367
/:
* configure.ac: Call AC_DISABLE_OPTION_CHECKING.
(baseargs): Add --disable-option-checking.
* configure: Regenerate.
config/:
* override.m4 (AC_DISABLE_OPTION_CHECKING): Define to be
empty if not defined, to avoid error with 2.59.
(_AC_LANG_IO_PROGRAM): When the Autoconf version is exactly
2.64, avoid per-language instances to drop fopen from test
program.
From-SVN: r150945
/:
Sync from src, merge:
2009-07-02 Tristan Gingold <gingold@adacore.com>
* configure.ac: Do not exclude gas for i386-*-darwin.
Add a case for x86_64-*-darwin.
* configure: Regenerate.
From-SVN: r150800
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-04-09 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Restore match for darwin9 or later. Use double
brackets since regeneration eats one pair.
* configure: Regenerate.
From-SVN: r145860
2009-01-12 Sebastian Pop <sebastian.pop@amd.com>
PR tree-optimization/38515
* configure.ac (cloog-polylib): Removed.
(with_ppl, with_cloog): Test for "no".
* configure: Regenerated.
From-SVN: r143311
* configure.ac (mips*-*-*linux*, mips*-*-gnu*): Use mt-mips-gnu.
* configure: Regenerate.
config/
* mt-mips16-compat: New file, taken from mt-mips-elfoabi.
* mt-mips-elfoabi: Include mt-mips16-compat.
* mt-mips-gnu: New file.
gcc/
* config.gcc (mips*-*-linux*, mips64*-*-linux*): Add
mips/t-libgcc-mips16 to tmake_file.
* config/mips/mips-protos.h (mips_call_type): New enum.
(mips_pic_base_register, mips_got_load): Declare.
(mips_restore_gp): Take an rtx argument.
(mips_use_pic_fn_addr_reg_p): Declare.
(mips_expand_call): Replace the sibcall_p argument with
a mips_call_type argument. Add a lazy_p parameter.
(mips_split_call): Declare.
* config/mips/mips.h (MIPS16_PIC_TEMP_REGNUM): New macro.
(MIPS16_PIC_TEMP): Likewise.
(reg_class): Delete M16_NA_REGS.
(REG_CLASS_NAMES, REG_CLASS_CONTENTS): Update accordingly.
(SYMBOL_FLAG_BIND_NOW, SYMBOL_REF_BIND_NOW_P): New macros.
(mips_split_hi_p): Declare.
* config/mips/mips.c (mips_split_hi_p): New array.
(mips_regno_to_class): Change M16_NA_REGS entries to M16_REGS.
(mips_got_symbol_type_p): New function.
(mips_global_symbol_p): Check SYMBOL_REF_EXTERNAL_P.
(mips16_stub_function_p): New function.
(mips16_local_function_p): Likewise.
(mips_use_pic_fn_addr_reg_p): Likewise.
(mips_cannot_force_const_mem): Return false for HIGHs.
Extend CONST_INT and symbolic handling to MIPS16, using
mips_symbol_insns to check that the base symbol type is a
legitimate constant. Reject GOT-based constants if
TARGET_MIPS16_PCREL_LOADS.
(mips_const_insns): Check targetm.cannot_force_const_mem when
decomposing a symbolic base and a large offset.
(mips_emit_call_insn): Add ORIG_ADDR and ADDR parameters.
When calling a function that needs $25 from MIPS16 code,
move the target address into $25 separately and add a USE
to the call insn.
(mips16_gp_pseudo_reg): Insert the initializer immediately
before the first real insn.
(mips_pic_base_register, mips_got_load): New functions.
(mips_split_symbol): Generalize the name of the LO_SUM_OUT
parameter to LOW_OUT. Say that it can be any valid SET_SRC
when splitting a load-address operation. Split SYMBOL_GOT_DISP
constants and highs of SYMBOL_GOT_PAGE_OFST constants.
(mips_call_tls_get_addr): Update the call to mips_expand_call,
also passing NULL_RTX rather than const0_rtx as the aux argument.
(mips_rewrite_small_data_p): Check mips_lo_relocs and mips_split_p
instead of TARGET_EXPLICIT_RELOCS.
(mips_ok_for_lazy_binding_p): Check SYMBOL_REF_BIND_NOW_P.
(mips_load_call_address): Replace the sibcall_p argument with
a mips_call_type argument. Use mips_got_load.
(mips16_local_alias): New structure.
(mips16_local_aliases): New variable.
(mips16_local_aliases_hash): New function.
(mips16_local_aliases_eq): Likewise.
(mips16_local_alias): Likewise.
(mips16_stub_function): Likewise.
(mips16_build_function_stub): Create a local alias for the target
function. Handle TARGET_ABICALLS. For PIC abicalls, emit a
.cpload directive and an R_MIPS_NONE relocation for the target
function, then load the alias rather than the function itself.
Wrap the non-PIC abicalls version in ".option pic0/.option pic2".
(mips16_copy_fpr_return_value): Use mips16_stub_function and
mips_expand_call. Set SYMBOL_REF_BIND_NOW on the symbol.
(mips16_build_call_stub): Replace the FN parameter with an
FN_PTR parameter. Force the address into a register if it
isn't a call_insn_operand; don't rely on the caller to do this.
If a call to a locally-defined and locally-binding MIPS16
function must be made indirectly, redirect the call to the
function's local alias. Use mips16_stub_function_p,
mips16_stub_function, mips_expand_call and use_reg.
Set SYMBOL_FLAG_BIND_NOW on __mips_call_* symbols.
Use explicit %hi and %lo accesses where possible.
Use MIPS_CALL to generate the correct code form of a
jal instruction. Add clobbers of $18 instead of uses.
Update the call to mips_emit_call_insn.
(mips_expand_call): Replace the SIBCALL_P argument with a
mips_call_type argument and handle the new MIPS_CALL_EPILOGUE value.
Take a LAZY_P parameter. Call mips16_build_call_stub first,
allowing it to modify the call address. Update the calls to
mips_load_call_address and mips_emit_call_insn.
(mips_split_call): New function.
(mips_init_relocs): Clear mips_split_hi_p. Only use %gp_rel if
!TARGET_MIPS16. Split SYMBOL_GOT_DISP, and the high parts of
SYMBOL_GOT_PAGE_OFST, for MIPS16 code.
(mips_global_pointer): Check mips16_cfun_returns_in_fpr_p.
(mips_extra_live_on_entry): Include MIPS16_PIC_TEMP_REGNUM
if TARGET_MIPS16.
(mips_cprestore_slot): New function.
(mips_restore_gp): Take a TEMP parameter. Handle TARGET_MIPS16
and use mips_cprestore_slot.
(mips_output_function_prologue): Handle TARGET_MIPS16 for
LOADGP_OLDABI.
(mips_emit_loadgp): Move into MIPS16_PIC_TEMP for MIPS16,
then use a copygp_mips16 instruction to set up $28.
(mips_expand_prologue): Initialize the cprestore slot for MIPS16 too.
(mips16_lay_out_constants): Call split_all_insns_noflow.
(mips_reorg_process_insns): Explicitly set all_noreorder_p to
false if TARGET_MIPS16.
(mips_reorg): Don't call vr4130_align_insns if TARGET_MIPS16.
(mips_output_mi_thunk): Use mips_got_symbol_type_p. Use the
mips_dangerous_for_la25_p approach for MIPS16 PIC calls too.
(mips_set_mips16_mode): Always set MASK_EXPLICIT_RELOCS for
MIPS16 code. Allow MIPS16 o32 PIC.
(mips_override_options): Allow MIPS16 o32 PIC.
* config/mips/mips.md: Lower CONST_GP_P moves into register moves
after reload if TARGET_USE_GOT.
(UNSPEC_COPYGP): New constant.
(length): Use a default length of 8 for MIPS16 GOT loads.
(*got_disp<mode>): Check mips_split_p instead of TARGET_XGOT.
(*got_page<mode>): Check mips_split_hi_p.
(*got_disp<mode>, *got_page<mode>): Use mips_got_load.
(unspec_got<mode>, unspec_call<mode>): New expanders.
(load_got<mode>, load_call<mode>): Remove the length attributes.
Use a got attribute instead of a type attribute.
(copygp_mips16): New insn.
(restore_gp): Add a scratch clobber and pass it to mips_restore_gp.
(load_call<mode>): Use a "d" constraint instead of an "r" constraint.
(sibcall, sibcall_value, call, call_value): Update the calls
to mips_expand_call.
(call_internal, call_value_internal): Use mips_split_call.
(call_value_multiple_internal): Likewise.
(call_split): Move after call_internal (the insn it is split from).
(call_internal_direct, call_value_internal_direct): Turn into
define_insn_and_splits. Split if TARGET_SPLIT_CALLS.
(call_direct_split, call_value_direct_split): New patterns.
* config/mips/constraints.md (c): Handle TARGET_MIPS16 first
and use M16_REGS instead of M16_NA_REGS.
* config/mips/predicates.md (const_call_insn_operand): Replace
the TARGET_ABSOLUTE_ABICALLS-based check with a more general
mips_use_pic_fn_addr_reg_p check.
(move_operand): Reject HIGHs if mips_split_hi_p.
* config/mips/mips16.S: Assembly as empty if the ABI is not suitable.
(__mips16_floatunsisf): Inline __mips16_floatsisf.
(CALL_STUB_NO_RET, CALL_STUB_REG): Copy the target register to $25.
* config/mips/libgcc-mips16.ver: New file.
* config/mips/t-libgcc-mips16 (SHLIB_MAPFILES): Add
$(srcdir)/config/mips/libgcc-mips16.ver.
gcc/testsuite/
* lib/target-supports.exp (check_profiling_available): Return false
for -p and -pg on MIPS16 targets.
From-SVN: r138912
* configure.ac: Set TOPLEVEL_CONFIGURE_ARGUMENTS early, when
"$@" is still intact with both Autoconf 2.59 and 2.62.
* configure: Regenerate.
From-SVN: r136849
2008-06-12 David S. Miller <davem@davemloft.net>
David Edelsohn <edelsohn@gnu.org>
* configure.ac: Add powerpc*-*-* to gold supported targets.
* configure: Regenerate.
Co-Authored-By: David Edelsohn <edelsohn@gnu.org>
From-SVN: r136717
* configure.ac (arm*-*-linux-gnueabi): Don't disable building
of libobjc for ARM EABI Linux.
* configure: Regenerate.
libobjc/
* exception.c (__objc_exception_class): Initialise as constant
array for ARM EABI. Change macro to static const for non-ARM EABI.
(ObjcException): Add note about structure layout. Remove landingPad
and handlerSwitchValue for ARM EABI.
(get_ttype_entry): Add __ARM_EABI_UNWINDER__ version
of function.
(CONTINUE_UNWINDING): Define for ARM EABI/otherwise cases.
(PERSONALITY_FUNCTION): Use ARM EABI-specific arguments, and add
ARM EABI unwinding support.
(objc_exception_throw): Use memcpy to initialise exception class.
From-SVN: r136215
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
Sync with src:
2008-04-14 David S. Miller <davem@davemloft.net>
* configure.ac: Add sparc*-*-* to gold supported targets.
* configure: Regenerate.
From-SVN: r134437
PR binutils/4334
* acx.m4 (ACX_CHECK_CYGWIN_CAT_WORKS): New macro to check that
cygwin builds are not running in textmode.
* configure.ac: Run ACX_XHEXK_CYGWIN_CAT_WORKS for cygwin hosted
builds.
* configure: Regenerate.
From-SVN: r133894
* configure.ac: Add support for --enable-gold.
* Makefile.def: Add gold as a directory like ld.
* configure, Makefile.in: Regenerate.
From-SVN: r133429
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (STAGE1_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
* doc/install.texi: Correct references to CFLAGS, replacing them
with BOOT_CFLAGS. Document flags used during bootstrap for
target libraries.
From-SVN: r132479
* configure.ac (CFLAGS_FOR_BUILD, CXXFLAGS_FOR_BUILD, LDFLAGS_FOR_BUILD): Default them to host flags only
for $host = $build.
Set default CXXFLAGS_FOR_BUILD to CXXFLAGS, not CFLAGS.
Set default LDFLAGS_FOR_BUILD to LDFLAGS, not CFLAGS.
* configure: Regenerate.
From-SVN: r129122
* configure.ac (mips*-sde-elf*): New stanza. Add target-libiberty
to $skipdirs and only disable gprof for newlib. Use the normal
mips*-elf* handling in other respects.
* configure: Regnerate.
gcc/
2007-xx-xx Nigel Stephens <nigel@mips.com>
David Ung <davidu@mips.com>
Thiemo Seufer <ths@mips.com>
Richard Sandiford <richard@codesourcery.com>
* config.gcc (mips*-sde-elf*): Add support for the SDE C libraries.
* configure.ac: Add a mipssde threading type.
* configure: Regenerate.
* config/mips/sdemtk.h: New file.
* config/mips/t-sdemtk: Likewise.
* config/mips/sdemtk.opt: Likewise.
* gthr-mipssde.h: Likewise.
* config/mips/sde.h (FUNCTION_PROFILER): Move to config/mips/sdemtk.h.
* config/mips/mips.h (MIPS_SAVE_REG_FOR_PROFILING_P): New macro.
(MIPS_ICACHE_SYNC): New macro, split from ...
* config/mips/mips.md (clear_cache): ...here.
* config/mips/mips.c (mips_save_reg_p): Check
MIPS_SAVE_REG_FOR_PROFILING_P on profiled functions.
(build_mips16_function_stub): Use targetm.strip_name_encoding.
(build_mips16_call_stub): Likewise.
libstdc++-v3/
2007-xx-xx Thiemo Seufer <ths@mips.com>
* crossconfig.m4 (mips*-sde-elf*): New stanza.
* configure: Regenerate.
From-SVN: r128495
PR other/32154
* configure.ac: For libgloss targets, point the linker to the linker
script, startup code and simulator library.
* configure: Regenerate.
From-SVN: r128344
2007-09-05 Richard Guenther <rguenther@suse.de>
* configure.ac (--enable-stage1-checking): If neither --enable-checking
nor --disable-checking is provided also turn on yes and types
checking for stage1.
* configure: Re-generate.
From-SVN: r128131
* gengtype.c: Don't include gtyp-gen.h.
(srcdir): Declare here.
(base_files, lang_dir_names): Allocate dynamically.
(gt_files, num_gt_files, num_lang_dirs): New globals.
(measure_input_list, read_input_line, read_input_list)
(set_lang_bitmap): New functions.
(get_base_file_bitmap): Rename get_lang_bitmap and drastically
simplify, relying on read_input_list to set up the bitmaps.
(main): Arguments are no longer unused. Check for correct number
of command line arguments, set srcdir and srcdir_len, then call
read_input_list, before doing anything else. No need to worry
about duplicates in main loop.
* configure.ac: Simplify the calculation of all_gtfiles.
Put language tags in there. Don't set or substitute
all_gtfiles_files_langs or all_gtfiles_files_frags.
* Makefile.in: Revamp the way gengtype is invoked, now that it
takes a file on its command line with a much simpler format.
Remove or replace with gtyp-input.list all references to gtyp-gen.h.
(GTFILES): Remove duplicates and C source files.
* c-config-lang.in, cp/config-lang.in, objc/config-lang.in
* objcp/config-lang.in: Add c-pragma.h to gtfiles.
* configure: Regenerate.
From-SVN: r123234
ChangeLog:
* configure: Rebuilt.
config/ChangeLog:
* acx.m4 (NCN_STRICT_CHECK_TOOLS): Mark environment variable as
precious. Prefer it over a cached value. Use cached value
verbosely.
(NCN_STRICT_CHECK_TARGET_TOOLS): Likewise. Don't override
environment variable with build-time tools.
From-SVN: r122108
2007-01-23 Richard Guenther <rguenther@suse.de>
PR bootstrap/30541
* Makefile.def (flags_to_pass): Add GNATBIND and GNATMAKE.
* Makefile.tpl (GNATBIND): Substitute it.
(GNATMAKE): Likewise.
(POSTSTAGE1_FLAGS_TO_PASS): Pass staged GNATBIND instead
of STAGE_PREFIX.
* Makefile.in: Regenerate.
* configure: Regenerate.
config/
* acx.m4 (ACX_PROG_GNAT): Check for gnatmake.
libada/
* Makefile.in (STAGE_PREFIX): Do not define.
(FLAGS_TO_PASS): Do not pass STAGE_PREFIX.
gnattools/
* Makefile.in (STAGE_PREFIX): Do not define.
ada/
* Make-lang.in: Replace invocations of gnatmake with $(GNATMAKE).
(gnatboot2): Pass staged GNATMAKE instead of STAGE_PREFIX.
(gnatboot3): Likewise.
(GNATBIND): Do not define.
* Makefile.in (GNATBIND): Do not define.
From-SVN: r121082
2007-01-04 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Use DEV-PHASE to detect the default for --enable-werror.
* configure: Regenerate.
From-SVN: r120432
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Reorganize recognition of languages. Add
--enable-stage1-languages. Show supported languages for the chosen
target rather than all recognized languages.
* configure: Regenerate.
From-SVN: r120271
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Remove "$build" case for powerpc-*-darwin* since
it only affects bootstrap and could be tested on "$host" as well.
* configure: Regenerate.
* config/mh-ppc-darwin: Add to the stage1 cflags here.
From-SVN: r120049
2006-12-10 Andreas Tobler <a.tobler@schweiz.org>
PR bootstrap/30134
* configure.in: Correct x86 darwin support for libjava to powerpc
and i?86 only.
* configure: Regenerate.
From-SVN: r119708
* configure.in: Check for GMP 4.1 or newer. Check for MPFR 2.2.0
or newer.
* configure: Regenerated.
* doc/install.texi: Document required versions of GMP and MPFR.
* fortran/arith.c: Conditionally include arctangent2().
(gfc_check_real_range): Use mpfr_subnormalize in preference to local
hack.
* fortran/trans-intrinsic.c (gfc_get_intrinsic_lib_fndecl): Append
l for long double functions.
* fortran/simplify.c: Wrap Copyright to new line.
(gfc_simplify_atan2): Use mpfr_atan2 in preference to arctangent2().
(gfc_simplify_log): Ditto.
PR fortran/28276
* fortran/simplify.c (gfc_simplify_exponent): Use mpfr_get_exp in
preference to broken local hack.
PR fortran/27021
* fortran/simplify.c (gfc_simplify_nearest): Use mpfr_nexttoward and
mpfr_subnormalize to handle numbers near zero in preference to broken
local hack.
PR fortran/28276
* testsuite/gfortran.dg/exponent_1.f90: New test.
PR fortran/27021
* testsuite/gfortran.dg/nearest_1.f90: New test.
From-SVN: r117257
2006-09-27 Dave Brolley <brolley@redhat.com>
* configure.in (RUNTEST): Look for 'runtest' in the source tree by using
$s instead of $r.
* configure: Regenerated.
From-SVN: r117256
2006-08-30 Corinna Vinschen <corinna@vinschen.de>
* configure.in: Never build newlib for a Mingw host.
Never build newlib as Mingw target library.
Test the existence of winsup/cygwin for building a Cygwin newlib,
rather than just winsup.
Add winsup/mingw and winsup/w32api paths to FLAGS_FOR_TARGET if
building a Mingw target.
* configure: Regenerate.
From-SVN: r116587
PR bootstrap/18058
* configure.in: Add -fkeep-inline-functions to CFLAGS for stage 1
if the bootstrap compiler is a GCC version that supports it.
* configure: Regenerate.
gcc/
* Makefile.in (BUILD_RTL): Add build/vec.o.
(build/gencondmd.o): Filter out -fkeep-inline-functions.
(build/genextract): Delete.
(build/genautomata): Likewise.
From-SVN: r115172
2006-06-20 David Ayers <d.ayers@inode.at>
PR bootstrap/28072
* configure.in: Add target-boehm-gc to noconfigdirs depending on
whether target-libjava is being configured instead of whether the
java front end is enabled.
* configure: Regenerate.
From-SVN: r114808
2006-06-06 Carlos O'Donell <carlos@codesourcery.com>
Sync from src:
* configure.in: Sync.
* configure: Regenerated.
2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.def: Added dependencies from sim and gdb on intl, and
added configure dependencies to everything with an all dependency
on intl.
* Makefile.in: Regenerated.
From-SVN: r114444
2006-06-06 David Ayers <d.ayers@inode.at>
PR libobjc/13946
* Makefile.def: Add dependencies for libobjc which boehm-gc.
* Makefile.in: Regenerate.
* configure.in: Add --enable-objc-gc at toplevel and have it
enable boehm-gc for Objective-C.
Remove target-boehm-gc from libgcj.
Add target-boehm-gc to target_libraries.
Add target-boehm-gc to noconfigdirs where ${libgcj}
is specified.
Assert that boehm-gc is supported when requested for Objective-C.
Only build boehm-gc if needed either for Java or Objective-C.
* configure: Regenerate.
From-SVN: r114435
2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* configure.in: Enable libgcj for hppa*-hp-hpux11*.
* configure: Rebuilt.
Co-Authored-By: Andreas Tobler <a.tobler@schweiz.ch>
From-SVN: r113938
* configure.in (m32c): Build libstdc++-v3. Pass flags to
reference libgloss so that libssp can be built in a combined
tree.
* configure: Regenerate.
From-SVN: r113066
