2008-12-13 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38504
io/write.c (write_decimal): Skip extra sign '-' at beginning of string
returned by gfc_itoa.
From-SVN: r142747
2008-12-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38430
* io/transfer.c (data_transfer_init): Move constraint check for REC=
and STREAM access into condition for other REC= constraints to simplify.
Comment out this constraint to avoid breaking compatibility with 4.3
until later. Added a TODO for above comment and this one.
Fix test for max pos.
From-SVN: r142575
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/38291
* io.c (match_dt_element): Use dt->pos in matcher.
(gfc_free_dt): Free dt->pos after use.
(gfc_resolve_dt): Use dt->pos in resolution of stream position tag.
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38291
* io/transfer.c (data_transfer_init): Add checks for POS= valid range.
Add check for unit opened with ACCESS="stream". Flush and seek if
current stream position does not match. Check ENDFILE on read.
From-SVN: r142515
2008-12-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/38285
* write_float.def (WRITE_FLOAT): Zero the float value for special case
only if scale_factor = 0.
From-SVN: r142455
PR libfortran/37839
* trans-io.c (gfc_build_io_library_fndecls): Decrease pad size back
to 16 pointers plus 32 integers. Don't use max integer kind
alignment, only gfc_intio_kind's alignment.
(gfc_trans_inquire): Only set flags2 if mask2 is non-zero.
* ioparm.def: Fix order, bitmasks and types of inquire round, sign
and pending fields. Move u in dt before id.
* io.c (gfc_free_inquire): Free decimal and size exprs.
(match_inquire_element): Match size instead of matching blank twice.
(gfc_resolve_inquire): Resolve size.
* gfortran.dg/f2003_inquire_1.f03: New test.
* gfortran.dg/f2003_io_1.f03: Remove xfail.
* gfortran.dg/f2003_io_4.f03: Likewise.
* gfortran.dg/f2003_io_5.f03: Likewise.
* gfortran.dg/f2003_io_6.f03: Likewise.
* gfortran.dg/f2003_io_7.f03: Likewise.
* io/io.h (IOPARM_INQUIRE_HAS_ROUND, IOPARM_INQUIRE_HAS_SIGN,
IOPARM_INQUIRE_HAS_PENDING): Adjust values.
(st_parameter_inquire): Reorder and fix types of round, sign and
pending fields.
(st_parameter_43, st_parameter_44): Removed.
(st_parameter_dt): Put back struct definition directly to u.p
declaration. Change type of u.p.size_used from gfc_offset to
GFC_IO_INT. Decrease back size of u.pad to 16 pointers and
32 ints. Put id, pos, asynchronous, blank, decimal, delim,
pad, round and sign fields after the union.
* io/inquire.c (inquire_via_unit, inquire_via_filename): Only read
flags2 if it is defined.
* io/transfer.c (read_sf, read_block_form, write_block): Cast
additions to size_used to GFC_IO_INT instead of gfc_offset.
(data_transfer_init): Clear whole u.p struct. Adjust
for moving id, pos, asynchronous, blank, decimal, delim, pad,
round and sign fields from u.p directly into st_parameter_dt.
(finalize_transfer): Don't cast size_used to GFC_IO_INT.
* io/file_pos.c (st_endfile): Clear whole u.p struct.
From-SVN: r142111
2008-11-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37472
* io/write_float.def (output_float_FMT_G_): Adjust conversion of
G format specification to F format.
From-SVN: r142079
2008-11-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37294
* io/write.c (namelist_write_newline): Use array loop specification to
advance to next internal array unit record. (namelist_write): Adjust to
accomodate the internal array unit behavior.
From-SVN: r141892
2008-10-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37707
* io/list_read.c (read_character): Remove code to look ahead in namelist
reads to descriminate non-delimited strings from namelist objects.
* io/write.c (namelist_write): Delimit character strings with quote or
apostrophe, defaulting to quote.
From-SVN: r141317
2008-10-19 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37834
* io/write_float.def (output_float): Emit '0.' for special case of
format specifier 'f0.0' and value of zero. Likewise emit '0' for 'f1.0'.
From-SVN: r141231
2008-10-16 Thomas Koenig <tkoenig@gcc.gnu.org>
* io/file_pos.c (unformatted_backspace): Normal case is
GFC_CONVERT_NATIVE.
* io/transfer.c (read_sf): Mark paths leading to generate_error()
as unlikely.
(readl_block_form): Likewise.
(read_block_direct): Likewise.
(write_block): Likewise.
(write_buf): Likewise.
(us_read): Likewise. Normal case is GFC_CONVERT_NATIVE.
(next_record_w_unf): Mark paths leading to generate_error()
as unlikely.
From-SVN: r141179
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* io/transfer.c (unformatted_read): CONVERT_NATIVE
is the usual case. Check for kind==1 for non-byte-reversing
operation.
(unformatted_write): Likewise.
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* gfortran.dg/convert_2.f90: New test case.
From-SVN: r141008
2008-10-08 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37707
* io/list_read.c (nml_get_obj_data): If the first namelist object rank
is greater than zero, call nml_object_read with the first object rather
than the sub-object.
From-SVN: r140995
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR fortran/37498
* trans-io.c (gfc_build_io_library_fndecls): Bump pad size.
(build_dt): Set mask bit for IOPARM_dt_f2003.
* ioparm.def: Add IOPARM_dt_f2003.
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37498
* file_pos (st_endfile): Clear memory only for libfortran 4.3 private
area.
* list_read.c (eat_separator): Only access F2003 I/O parameters if
IOPARM_DT_HAS_F2003 bit is set. (parse_real): Ditto.
(read_real): Ditto.
* read.c (read_a): Likewise. (read_a_char4): Likewise though not
strictly necessary. (read_f): Likewise.
* io.h (unit_sign_s): New enumerator to allow duplication of
st_parameter structures. (IOPARM_DT_HAS_F2003): New mask bit.
(st_parameter_43): New structure copied from 4.3 version of
st_paramater_dt private section. (st_parameter_44): New structure with
F2003 items added. (st_parameter_dt): Modified to create union of new
and old structures to allow correct memory setting for 4.3 ABI
compatibility. Bumped the pad size.
* transfer.c (read_sf): Do not use F2003 I/O memory areas unless
IOPARM_DT_HAS_F2003 bit has been set. (read_block_form): Ditto.
(formatted_transfer_scalar): Ditto. (data_transfer_init): Ditto and
add comment, fix formatting.
* write.c (write_default_char4): Likewise though not strictly necessary.
(write_utf8_char4): Ditto. (write_character): Ditto.
(write_real_g0): Ditto. (list_formatted_write_scalar): Ditto.
(nml_write_obj): Ditto. (namelist_write): Ditto.
* write_float.def (calculate_sign): Eliminate warning by including all
cases in switch. (output_float): Output only decimal point of F2003 flag
is not set.
From-SVN: r140576
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* io.c (check_format): Allow specifying precision with g0 format.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37301
PR libfortran/37228
* io/io.h (write_real_g0): Declare new function to handle g0.d format.
* io/transfer.c (formatted_transfer_scalar): Use new function.
* io/format.c (parse_format_list): Enable g0.d.
* io/write.c (write_a_char4): Delete unused var.
(set_fnode_default): New function to set the default fnode w, d, and e
factored from write_real. (write_real): Use new factored function.
(write_real_g0): New function that sets d to that passed by g0.d format
specifier and set format to ES. Default values for w and e are used
from the new function, set_fnode_default.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* gfortran.dg/fmt_g0_4.f08: Revised test.
From-SVN: r139886
2008-08-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36895
* io/write.c (namelist_write_newline): New function to correctly mark
next records in both external and internal units.
(nml_write_obj): Use new function.
(namelist_write: Use new function.
From-SVN: r139813
2008-08-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35863
* intrinsics/selected_char_kind.c: Enable iso_10646.
* io/read.c (typedef uchar): New type.
(read_utf8): New function to read a single UTF-8 encoded character.
(read_utf8_char1): New function to read UTF-8 into a KIND=1 string.
(read_default_char1): New functio to read default into KIND=1 string.
(read_utf8_char4): New function to read UTF-8 into a KIND=4 string.
(read_default_char4): New function to read UTF-8 into a KIND=4 string.
(read_a): Modify to use the new functions.
(read_a_char4): Modify to use the new functions.
* io/write.c (error.h): Add include. (typedef uchar): New type.
(write_default_char4): New function to default write KIND=4 string.
(write_utf8_char4): New function to UTF-8 write KIND=4 string.
(write_a_char4): Modify to use new functions.
(write_character): Modify to use new functions.
From-SVN: r139147
2008-07-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36852
* io/list_read.c: If variable rank is zero, do not adjust the found
namelist object pointer.
From-SVN: r138072
2008-07-22 Daniel Kraft <d@domob.eu>
PR fortran/29835
* io.c (error_element), (format_locus): New static globals.
(unexpected_element): Spelled out this message fully.
(next_char): Keep track of locus when not MODE_STRING.
(next_char_not_space): Remember last parsed element in error_element.
(format_lex): Fix two indentation errors.
(check_format): Use format_locus and possibly error_element for a
slightly better error message on invalid format.
(check_format_string): Set format_locus to start of the string
expression used as format.
2008-07-22 Daniel Kraft <d@domob.eu>
PR fortran/29835
* io/format.c (struct format_data): New member error_element.
(unexpected_element): Added '%c' to message.
(next_char): Keep track of last parsed character in fmt->error_element.
(format_error): If the message is unexpected_element, output the
offending character, too.
2008-07-22 Daniel Kraft <d@domob.eu>
PR fortran/29835
* gfortran.dg/fmt_error_3.f90: New test.
* gfortran.dg/fmt_error_4.f90: New test.
* gfortran.dg/fmt_error_5.f90: New test.
From-SVN: r138063
2008-07-22 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/36890
* io/file_pos.c: Declare READ_CHUNK as signed to avoid
signed/unsigned comparison warning in formatted_backspace.
From-SVN: r138050
2008-07-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36857
* io/write_float.def: Comment out locale dependent code and fix general
comments.
From-SVN: r138021
2008-06-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36657
* io/list_read.c (read_character): Check for '!' along with separators.
(find_nml_name): Likewise and eat the comment if found.
From-SVN: r137236
2008-06-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/36546
* io/list_read.c (eat_separator): Add tab character to condition
for looping past whitespace.
From-SVN: r136859
2008-06-13 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/35863
* libgfortran.h: Change l8_to_l4_offset to big_endian and add endian_off.
* runtime/main.c: Fix error in comment. Change l8_to_l4_offset to
big_endian. (determine_endianness): Add endian_off and set its value
according to big_endian.
* gfortran.map: Add symbol for new _gfortran_transfer_character_wide.
* io/io.h: Add prototype declarations for new functions.
* io/list_read.c (list_formatted_read_scalar): Modify to handle kind=4.
(list_formatted_read): Calculate stride based on kind for character type
and use it when calling list_formatted_read_scalar.
* io/inquire.c (inquire_via_unit): Change l8_to_l4_offset to big_endian.
* io/open.c (st_open): Change l8_to_l4_offset to big_endian.
* io/read.c (read_a_char4): New function to handle formatted read.
* io/write.c: Define GFC_CHAR4(x) to improve readability of code.
(write_a_char4): New function to handle formatted write.
(write_character): Modify to accept the kind parameter and adjust for
endianess of the machine. (list_formatted_write): Calculate the stride
resulting from the kind and adjust the list_formatted_write_scalar call
accordingly. (nml_write_obj): Adjust calls to write_character.
(namelist_write): Likewise.
* io/transfer.c (formatted_transfer_scaler): Rename 'len' argument to
'kind' argument to better describe what it is. Add calls to new
functions for kind == 4. (formatted_transfer): Modify to handle the case
of type character and kind equals 4 to pass in the kind to the transfer
routines. (transfer_character_wide): Add this new function.
(transfer_array): Don't set kind to the character string length. Adjust
strides bases on character kind.
(unformatted_read): Adjust size based on kind for character types.
(unformatted_write): Likewise. (data_transfer_init): Change
l8_to_l4_offset to big_endian.
From-SVN: r136763
2008-06-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36420
PR libfortran/36421
PR libfortran/36422
* io/io.h: Add prototype for write_real.
* io/transfer.c (formatted_transfer_scalar): For FMT_G and width zero,
use write_real.
* io/format.c: Add zero width error message. (parse_format_list): Use
error message for FMT_A if followed by FMT_ZERO. Use zero width error
message for FMT_G if mode is READ or if -std=f95 or f2003. (fmormat0):
Fix typo in comment.
* io/write.c (write_a): Set wlen to len if FMT_G and length is zero.
(write_l): Add wlen variable and use it if FMT_G and width is zero.
(write_decimal): If FMT_G, set m to -1 to flag processor dependent
formatting. (write_real): Remove static declaration.
From-SVN: r136545
2008-05-17 Thomas Koenig <tkoenig@gcc.gnu.org>
* io/list_read.c (list_formatted_read_scalar): Declare
type as volatile to shut up compiler warning.
From-SVN: r135480
2008-05-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561
* io/io.h (struct fbuf): Change pointer to position offset.
* io/fbuf.c (fbuf_init): Reduce default size of buffer, ptr=>pos
changes.
(fbuf_reset): ptr=>pos changes.
(fbuf_alloc): If the request doesn't fit, don't waste memory by
keeping flushed bytes. ptr=>pos changes.
(fbuf_flush): ptr=>pos changes.
(fbuf_seek): Don't seek past the left tab limit, don't update active
byte count.
* io/open.c (new_unit): If RECL has been specified, used that as
initial buffer size.
From-SVN: r135433
2008-05-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36094
* runtime/error.c (show_locus): Provide modified error message when
filename has not yet been associated with a unit number.
* io/open.c (encoding_opt[]): Comment out "utf-8" option and add TODO.
From-SVN: r134876
* io/list_read.c (snprintf): Define if HAVE_SNPRINTF isn't defined.
(nml_read_obj): Add nml_err_msg_size argument. Pass it down to
recursive call. Use snprintf instead of sprintf when %s nl->var_name
is used.
(nml_get_obj_data): Add nml_err_msg_size argument. Pass it down to
nml_read_obj call. Use snprintf instead of sprintf when %s
nl->var_name is used. Pass nml_err_msg to nml_parse_qualifier instead
of parse_err_msg array. Append " for namelist variable " and
nl->var_name to it.
(namelist_read): Increase size of nml_err_msg array to 200. Pass
sizeof nml_err_msg as extra argument to nml_get_obj_data.
* gfortran.dg/namelist_47.f90: New test.
From-SVN: r134132
2008-04-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* io/open.c (edit_modes): Set flags.async. (new_unit) Set flags.async
and flags.status. (st_open): Initialize flags.async.
* io/list_read.c (read_charactor): Use delim_status instead of
flags.delim.
* io/read.c (read_x): Use pad_status instead of flags.pad.
* io/inquire.c (inquire_via_unit): Add new checks.
(inquire_via_filename): Likewise.
* io/io.h (st_parameter_inquire): Add new flags.
(st_parameter_dt): Likewise.
* io/unit.c (get_internal_unit): Set flags.async. (init_units): Set
flags.async.
* io/transfer.c: Add delim and pad option arrays. (read_sf): Use
pad_status instead of flags.pad. (read_block): Likewise.
(data_transfer_init): Set flags.async and add checks.
* io/write.c (write_character): Use delim_status.
(list_formatted_write_scalar): Likewise. (nml_write_obj): Likewise.
(namelist_write): Likewise.
From-SVN: r133988
2008-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* gfortran.map: Add new symbol, _gfortran_st_wait.
* libgfortran.h (st_paramter_common): Add new I/O parameters.
* open.c (st_option decimal_opt[], st_option encoding_opt[],
st_option round_opt[], st_option sign_opt[], st_option async_opt[]): New
parameter option arrays. (edit_modes): Add checks for new parameters.
(new_unit): Likewise. (st_open): Likewise.
* list_read.c (CASE_SEPERATORS): Add ';' as a valid separator.
(eat_separator): Handle deimal comma. (read_logical): Fix whitespace.
(parse_real): Handle decimal comma. (read_real): Handle decimal comma.
* read.c (read_a): Use decimal status flag to allow comma in place of a
decimal point. (read_f): Allow comma as acceptable character in float.
According to decimal flag, substitute a period for a comma.
(read_x): If decimal status flag is comma, disable the read_comma flag,
not allowing comma as a delimiter, an extension otherwise.
* io.h: (unit_decimal, unit_encoding, unit_round, unit_sign,
unit_async): New enumerators. Add all new I/O parameters.
* unix.c (unix_stream, int_stream): Add io_mode asychronous I/O control.
(move_pos_offset, fd_alloc_w_at): Fix some whitespace.
(fd_sfree): Use new enumerator. (fd_read): Likewise.
(fd_write): Likewise. (fd_close): Fix whitespace.
(fd_open): Use new enumertors. (tempfile, regular_file,
open_external): Fix whitespace. (output_stream, error_stream): Set
method. (stream_offset): Fix whitespace.
* transfer.c: (st_option decimal_opt[], sign_opt[], blank_opt[]): New
option arrays. (formatted_transfer_scalar): Set sf_read_comma flag
based on new decimal_status flag. (data_transfer_init): Initialize new
parameters. Add checks for decimal, sign, and blank. (st_wait): New stub.
* format.c: (format_lex): Add format specifiers DP, DC, and D.
(parse_format_list): Parse the new specifiers.
* write.c (write_decimal): Use new sign enumerators to set the sign.
(write_complex): Handle decimal comma and semi-colon separator.
(nml_write_obj): Likewise.
* write_float.def: Revise sign enumerators. (calculate_sign): Use new
sign enumerators. (output_float): Likewise. Use new decimal_status flag
to set the decimal character to a point or a comma.
From-SVN: r133943
2008-03-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35699
* io/transfer.c (write_buf): Don't pad the record, just return if the
data is NULL. (next_record_w): If there are bytes left in the record
for unformatted direct I/O, pad out the record with zero bytes.
From-SVN: r133699
2008-03-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35632
* io/transfer.c (data_transfer_init): Fix whitespace.
(next_record_w): Truncate the file only if the stream
position is short of the file end.
From-SVN: r133454
2008-03-19 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35627
* io/list_read.c (free_line): Clear the line buffer enable flag and
reset the index into line_buffer, aka item_count.
(next_char): Cleanup whitespace.
(read_logical): Use unget_char to assure that the first character of the
bad logical is saved in case it is part of an object name. Remove the
clearing of index and flag that is now in free_line.
(read_real): Likewise.
From-SVN: r133360
2008-03-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35617
* io/list_read.c (eat_separator): If next character after eatline is '!'
then eatline again.
From-SVN: r133302
PR libfortran/35293
* io/unix.c (fd_truncate): Fold s->special_file case into
success case of ftruncate/chsize call instead of the failure case.
Make failure case actually return failure. Properly update stream
pointers on failure. Call runtime_error for targets without
neither ftruncate nor chsize where such a call would be needed.
From-SVN: r132888
2008-02-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35132
* io/transfer.c (next_record_w): Truncate after the last record for
STREAM I/O.
PR libfortran/34954
* io/transfer.c (data_transfer_init): Initialize dtp->rec if writing.
PR libfortran/34974
* io/transfer.c (formatted_transfer_scalar): Flush the buffer if skips
is less than zero. (next_record_w): Use sseek to position the file to
the max position reached.
From-SVN: r132512
2008-02-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35036
* write_float.def (output_float): Add error checks for zero digits
after decimal point in E and D format specifiers.
From-SVN: r132510
2008-02-10 Danny Smith <dannysmith@users.sourceforge.net>
PR gcc/35063
* gthr-win32.h (__gthread_mutex_destroy_function): New function
to CloseHandle after unlocking to prevent accumulation of handle
count.
2008-02-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35063
* io/unit.c (destroy_unit_mutex): New function that uses
__gthread_mutex_destroy_function or pthread_mutex_destroy after
unlocking and before free_mem for final closure of I/O unit.
(delete_root): Use new function.
(free_internal_unit): Likewise.
(close_unit_1): Likewise.
From-SVN: r132217
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* io/transfer.c (next_record_w): Always move to the farthest
position when completing the record (also when we are
processing a slash edit descriptor).
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* gfortran.dg/x_slash_2.f: New test.
From-SVN: r131864
2008-01-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34876
* io/transfer.c (write_buf): Handle case of zero sized array.
(transfer_array): Set data pointer to NULL and size to zero. Then
make a data transfer and return.
From-SVN: r131848
2008-01-19 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/inquire.c (inquire_via_unit): If a unit is opened, return values
according to the open action for DIRECT, FORMATTED, and UNFORMATTED.
(inquire_via_filename): Return "UNKNOWN" for SEQUENTIAL, DIRECT,
FORAMATTED, and UNFORMATTED inquiries.
* io/unix.c (inquire_sequential): Return "UNKNOWN" when appropriate
for files that are not opened. (inquire_direct): Same.
(inquire_formatted): Same.
From-SVN: r131672
2008-01-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (formatted_transfer_scalar): Set max_pos to the greater
of the current max_pos or the newly calculated position.
From-SVN: r131640
2008-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34676
* io/list_read.c (next_char): Only save the EOF condition for later if
advance="no".
From-SVN: r131337
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* io/io.h: Adjust protoypes for open_internal(),
next_array_record() and init_loop_spec().
* io/list_read.c (next_char): Use argument "finished"
of next_array_record to check for end on internal file.
* io/unit.c: Calculate the offset for an array
internal file and supply this informatin to open_internal().
* io/unix.c (open_internal): Set the offset for the internal
file on open.
* io/transfer.c (init_loop_spec): Calculate the starting
record in case of negative strides. Return size of 0 for
an empty array.
(next_array_record): Use an extra flag to signal that the
array is finished.
(next_record_r): Use the new flag to next_array_record().
(next_record_w): Likewise.
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* gfortran.dg/internal_readwrite_1.f90: New test.
* gfortran.dg/internal_readwrite_2.f90: New test.
From-SVN: r131305
2007-12-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (read_sf): Check if readlen was less than the requested
number of bytes to read and if so, generate error.
From-SVN: r131177
2007-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/34427
* io/list_read.c (read_real): Handle intervening line ends and spaces.
(get_name): Don't push separators to saved_string.
(eat_separator): If in namelist mode eat spaces and line ends as well.
From-SVN: r131003
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* io/io.h: Add previous_nonadvancing_write to gfc_unit.
Add prototype for finish_last_advance_record.
* io/file_pos.c (st_backspace): Generate error if backspace is
attempted for direct access or unformatted stream.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the backspace.
(st_endfile): Generate error if endfile is attempted for
direct access.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the endfile.
(st_rewind): Generate error if rewind is attempted for
direct access.
* unit.c (close_unit_1): Move functionality to write
previously written bytes to...
(finish_last_advance_record): ... here.
* transfer.c (data_transfer_init): If reading, reset
previous_nonadvancing_write.
(finalize_transfer): Set the previous_noadvancing_write
flag if we are writing and ADVANCE="no" was specified.
Only call next_record() if advance="no" wasn't specified.
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* gfortran.dg/advance_6.f90: New test case.
* gfortran.dg/direct_io_7.f90: New test case.
* gfortran.dg/streamio_13.f90: New test case.
From-SVN: r130912
2007-12-02 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (read_block, read_block_direct, write_block, write_buf):
Don't seek if file position is already there for STREAM I/O.
(finalize_transfer): For STREAM I/O don't flush unless the file position
has moved past the start position before the transfer.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r130574
2007-11-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34291
* io/list_read.c (read_character): When reading an unquoted string,
return if special characters that could signify the end of the namelist
read are encountered.
From-SVN: r130548
2007-11-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (finalize_transfer): Do not flush for
unformatted STREAM I/O.
From-SVN: r129870
2007-10-18 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33795
* libgfortran.h: Add unbuffered_preconnected.
* io/unix.c (output_stream): Set stream unbuffered flag if
options.unbuffered_preconnected has been set.
(error_stream): Ditto.
* runtime/environ.c (variable_table): Add to environment variable table
the entry: GFORTRAN_UNBUFFERED_PRECONNECTED.
Co-Authored-By: Jerry DeLisle <jvdelisle@gcc.gnu.org>
From-SVN: r129470
2007-10-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33055
* io/inquire.c (inquire_via_unit): If inquiring by unit, check for
an error condition from the IOSTAT variable and set EXIST to false if
there was a bad unit number.
From-SVN: r129344
2007-10-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33672
* io/list_read.c (nml_parse_qualifier): Add character specific error
messages. Check for proper form of sub-string qualifiers. Return the
parsed_rank flag indicating a non-zero rank qualifier.
(nml_get_obj_data): Count the instances of non-zero rank qualifiers.
Issue an error if more that one non-zero rank qualifier is found.
From-SVN: r129309
2007-10-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/list_read.c (read_character): Use line_buffer to scan ahead for
object name or string when no delimiter is found.
From-SVN: r129016
2007-10-02 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/list_read.c (read_character): Use DELIM_APOSTROPHE and DELIM_QUOTE
and quote value in check of first character in string.
From-SVN: r128973
2007-09-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33400
* io/list_read.c (next_char): Interpret encountering the end of file the
first time as an end of line. Subsequent reads give EOF error.
From-SVN: r128868
PR libfortran/23272
* io/unix.c (id_from_handle, id_from_path, id_from_fd): New
functions.
(compare_file_filename, find_file, find_file0): Use the new
functions above.
* gfortran.dg/inquire_10.f90: New test.
From-SVN: r128636
PR libfortran/21185
* runtime/compile_options.c (set_options): Fix typo.
* runtime/main.c (store_exe_path): If getcwd is not available,
don't use it.
* intrinsics/getcwd.c: Same thing here.
* io/unix.c (fallback_access): New fallback function for access.
(fix_fd): Don't use dup if it's not available.
* configure.ac: Check for dup and getcwd.
* configure: Regenerate.
* config.h.in: Regenerate.
From-SVN: r128512
2007-09-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33307
* io/filepos.c (st_backspace): Don't truncate when already at the end
of the file.
From-SVN: r128253
2007-09-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/write.c (nml_write_obj): Set the delimiter correctly before calling
write_character. (namelist_write): Clean up the code a little and add
comments to clarify what its doing.
From-SVN: r128170
2007-03-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33225
* io/write.c (stdbool.h): Add include. (sign_t): Move typedef to
new file write_float.def. Include write_float.def.
(extract_real): Delete. (calculate_sign): Delete.
(calculate_exp): Delete. (calculate_G_format): Delete.
(output_float): Delete. (write_float): Delete.
* io/write_float.def (calculate_sign): Added.
(output_float): Refactored to be independent of kind and added to this
file for inclusion. (write_infnan): New function to write "Infinite" or
"NaN" depending on flags passed, independent of kind.
(CALCULATE_EXP): New macro to build kind specific functions. Use it.
(OUTPUT_FLOAT_FMT_G): New macro, likewise. Use it.
(DTOA, DTOAL): Macros to implement "decimal to ascii".
(WRITE_FLOAT): New macro for kind specific write_float functions.
(write_float): Revised function to determine kind and use WRITE_FLOAT
to implement kind specific output.
From-SVN: r128114
2007-09-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33253
* io/list_read.c (read_character): Use DELIM_APOSTROPHE and DELIM_QUOTE
in check of first character in string.
From-SVN: r128057
2007-08-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/write.c (stdbool.h): Add include. (sign_t): Move typedef to
new file write_float.def. Include write_float.def.
(extract_real): Delete. (calculate_sign): Delete.
(calculate_exp): Delete. (calculate_G_format): Delete.
(output_float): Delete. (write_float): Delete.
* io/write_float.def (calculate_sign): Added.
(output_float): Refactored to be independent of kind and added to this
file for inclusion. (write_infnan): New function to write "Infinite" or
"NaN" depending on flags passed, independent of kind.
(CALCULATE_EXP): New macro to build kind specific functions. Use it.
(OUTPUT_FLOAT_FMT_G): New macro, likewise. Use it.
(DTOA, DTOAL): Macros to implement "decimal to ascii".
(WRITE_FLOAT): New macro for kind specific write_float functions.
(write_float): Revised function to determine kind and use WRITE_FLOAT
to implement kind specific output.
From-SVN: r127846
2007-08-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/33055
* trans-io.c (create_dummy_iostat): New function to create a unique
dummy variable expression to use with IOSTAT.
(gfc_trans_inquire): Use the new function to pass unit number error info
to run-time library if a regular IOSTAT variable was not given.
PR libfortran/33055
* io/inquire.c (inquire_via_unit): If inquiring by unit, check for
an error condition from the IOSTAT variable and set EXIST to false if
there was a bad unit number.
From-SVN: r127817
2007-08-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33039
* io/list_read.c (find_nml_name): Check for a space after a namelist
name match.
From-SVN: r127332
2007-08-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/32977
* io/unix.c: If there is no vsnprintf, use vsprintf and issue
a fatal error when a buffer overrun occurs.
From-SVN: r127187
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* trans-io.c (gfc_build_io_library_fndecls): Change to use
gfc_array_index_type for array descriptor triplets instead of
gfc_int4_type_node.
libgfortran ChangeLog:
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* io/transfer.c (st_set_nml_var_dim): Use index_type instead of
GFC_INTEGER_4 for array descriptor triplets.
From-SVN: r126992
2007-07-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
PR fortran/32611
* runtime/compile_options.c (set_std): Remove.
(set_options): New function.
(init_compile_options): Add initialization for -fsign-zero option.
* gfortran.map (GFORTRAN_1.0): Rename _gfortran_set_std into
_gfortran_set_options.
* libgfortran.h (compile_options_t): Add sign_zero field.
* io/write.c (output_float): Use the sign bit of the value to determine
if a negative sign should be emitted for zero values. Do not emit the
negative sign for zero if -fno-sign-zero was set during compile.
Co-Authored-By: Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
From-SVN: r126654
2007-07-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32752
* io/unix.c (unix_stream): Move buffer pointer adjacent to small_buffer.
* io/transfer.c (formatted_transfer_scalar): If stream I/O, set
bytes_used to zero. Fix off by one error in calculation of pos and
skips. Eliminate duplicate pending_spaces check.
From-SVN: r126652
2007-07-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32702
* io/unix.c (unix_stream): Restore buffer pointer and small_buffer.
(fd_alloc): If the number of bytes needed is greater than the default
BUFFER_SIZE, allocate a new buffer large enough. Free the old buffer if
necessary. (fd_sfree): Restore use of buffer pointer.
(fd_close): Likewise. (fd_open): Likewise.
(init_error_stream): Likewise.
From-SVN: r126510
2007-07-02 Steven G. Kargl <kargl@gcc.gnu.org>
Restore collateral damage from ISO C Binding merge.
2007-06-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32456
* io/unit.c (filename_from_unit): Don't use find_unit, instead search
for unit directly.
From-SVN: r126238
2007-07-01 Christopher D. Rickett <crickett@lanl.gov>
* interface.c (gfc_compare_derived_types): Special case for comparing
derived types across namespaces.
(gfc_compare_types): Deal with BT_VOID.
(compare_parameter): Use BT_VOID to accept ISO C Binding pointers.
* trans-expr.c (gfc_conv_function_call): Remove setting parm_kind
to SCALAR
(gfc_conv_initializer): Deal with ISO C Binding NULL_PTR and
NULL_FUNPTR.
(gfc_conv_expr): Convert expressions for ISO C Binding derived types.
* symbol.c (gfc_set_default_type): BIND(C) variables should not be
implicitly declared.
(check_conflict): Add BIND(C) and check for conflicts.
(gfc_add_explicit_interface): Whitespace.
(gfc_add_is_bind_c): New function.
(gfc_copy_attr): Use it.
(gfc_new_symbol): Initialize ISO C Binding objects.
(get_iso_c_binding_dt): New function.
(verify_bind_c_derived_type): Ditto.
(gen_special_c_interop_ptr): Ditto.
(add_formal_arg): Ditto.
(gen_cptr_param): Ditto.
(gen_fptr_param): Ditto.
(gen_shape_param): Ditto.
(add_proc_interface): Ditto.
(build_formal_args): Ditto.
(generate_isocbinding_symbol): Ditto.
(get_iso_c_sym): Ditto.
* decl.c (num_idents_on_line, has_name_equals): New variables.
(verify_c_interop_param): New function.
(build_sym): Finish binding labels and deal with COMMON blocks.
(add_init_expr_to_sym): Check if the initialized expression is
an iso_c_binding named constants
(variable_decl): Set ISO C Binding type_spec components.
(gfc_match_kind_spec): Check match for C interoperable kind.
(match_char_spec): Fix comment. Chnage gfc_match_small_int
to gfc_match_small_int_expr. Check for C interoperable kind.
(match_type_spec): Clear the current binding label.
(match_attr_spec): Add DECL_IS_BIND_C. If BIND(C) is found, use it
to set attributes.
(set_binding_label): New function.
(set_com_block_bind_c): Ditto.
(verify_c_interop): Ditto.
(verify_com_block_vars_c_interop): Ditto.
(verify_bind_c_sym): Ditto.
(set_verify_bind_c_sym): Ditto.
(set_verify_bind_c_com_block): Ditto.
(get_bind_c_idents): Ditto.
(gfc_match_bind_c_stmt): Ditto.
(gfc_match_data_decl): Use num_idents_on_line.
(match_result): Deal with right paren in BIND(C).
(gfc_match_suffix): New function.
(gfc_match_function_decl): Use it. Code is re-arranged to deal with
ISO C Binding result clauses.
(gfc_match_subroutine): Deal with BIND(C).
(gfc_match_bind_c): New function.
(gfc_get_type_attr_spec): New function. Code is re-arranged in and
taken from gfc_match_derived_decl.
(gfc_match_derived_decl): Add check for BIND(C).
* trans-common.c: Forward declare gfc_get_common.
(gfc_sym_mangled_common_id): Change arg from 'const char *name' to
'gfc_common_head *com'. Check for ISO C Binding of the common block.
(build_common_decl): 'com->name' to 'com in SET_DECL_ASSEMBLER_NAME.
* gfortran.h: Add GFC_MAX_BINDING_LABEL_LEN
(bt): Add BT_VOID
(sym_flavor): Add FL_VOID.
(iso_fortran_env_symbol, iso_c_binding_symbol, intmod_id): New enum
(CInteropKind_t): New struct.
(c_interop_kinds_table): Use it. Declare an array of structs.
(symbol_attribute): Add is_bind_c, is_c_interop, and is_iso_c
bitfields.
(gfc_typespec): Add is_c_interop; is_iso_c, and f90_type members.
(gfc_symbol): Add from_intmod, intmod_sym_id, binding_label, and
common_block members.
(gfc_common_head): Add binding_label and is_bind_c members.
(gfc_gsymbol): Add sym_name, mod_name, and binding_label members.
Add prototypes for get_c_kind, gfc_validate_c_kind,
gfc_check_any_c_kind, gfc_add_is_bind_c, gfc_add_value,
verify_c_interop, verify_c_interop_param, verify_bind_c_sym,
verify_bind_c_derived_type, verify_com_block_vars_c_interop,
generate_isocbinding_symbol, get_iso_c_sym, gfc_iso_c_sub_interface
* iso-c-binding.def: New file. This file contains the definitions
of the types provided by the Fortran 2003 ISO_C_BINDING intrinsic
module.
* trans-const.c (gfc_conv_constant_to_tree): Deal with C_NULL_PTR
or C_NULL_FUNPTR expressions.
* expr.c (gfc_copy_expr): Add BT_VOID case. For BT_CHARACTER, the
ISO C Binding requires a minimum string length of 1 for '\0'.
* module.c (intmod_sym): New struct.
(pointer_info): Add binding_label member.
(write_atom): Set len to 0 for NULL pointers. Check for NULL p and *p.
(ab_attribute): Add AB_IS_BIND_C, AB_IS_C_INTEROP and AB_IS_ISO_C.
(attr_bits): Add "IS_BIND_C", "IS_C_INTEROP", and "IS_ISO_C".
(mio_symbol_attribute): Deal with ISO C Binding attributes.
(bt_types): Add "VOID".
(mio_typespec): Deal with ISO C Binding components.
(mio_namespace_ref): Add intmod variable.
(mio_symbol): Check for symbols from an intrinsic module.
(load_commons): Check for BIND(C) common block.
(read_module): Read binding_label and use it.
(write_common): Add label. Write BIND(C) info.
(write_blank_common): Blank commons are not BIND(C). Explicitly
set is_bind_c=0.
(write_symbol): Deal with binding_label.
(sort_iso_c_rename_list): New function.
(import_iso_c_binding_module): Ditto.
(create_int_parameter): Add to args.
(use_iso_fortran_env_module): Adjust to deal with iso_c_binding
intrinsic module.
* trans-types.c (c_interop_kinds_table): new array of structs.
(gfc_validate_c_kind): New function.
(gfc_check_any_c_kind): Ditto.
(get_real_kind_from_node): Ditto.
(get_int_kind_from_node): Ditto.
(get_int_kind_from_width): Ditto.
(get_int_kind_from_minimal_width): Ditto.
(init_c_interop_kinds): Ditto.
(gfc_init_kinds): call init_c_interop_kinds.
(gfc_typenode_for_spec): Adjust for BT_VOID and ISO C Binding pointers.
Adjust handling of BT_DERIVED.
(gfc_sym_type): Whitespace.
(gfc_get_derived_type): Account for iso_c_binding derived types
* resolve.c (is_scalar_expr_ptr): New function.
(gfc_iso_c_func_interface): Ditto.
(resolve_function): Use gfc_iso_c_func_interface.
(set_name_and_label): New function.
(gfc_iso_c_sub_interface): Ditto.
(resolve_specific_s0): Use gfc_iso_c_sub_interface.
(resolve_bind_c_comms): New function.
(resolve_bind_c_derived_types): Ditto.
(gfc_verify_binding_labels): Ditto.
(resolve_fl_procedure): Check for ISO C interoperability.
(resolve_symbol): Check C interoperability.
(resolve_types): Walk the namespace. Check COMMON blocks.
* trans-decl.c (gfc_sym_mangled_identifier): Prevent the mangling
of identifiers that have an assigned binding label.
(gfc_sym_mangled_function_id): Use the binding label rather than
the mangled name.
(gfc_finish_var_decl): Put variables that are BIND(C) into a common
segment of the object file, because this is what C would do.
(gfc_create_module_variable): Conver to proper types
(set_tree_decl_type_code): New function.
(generate_local_decl): Check dummy variables and derived types for
ISO C Binding attributes.
* match.c (gfc_match_small_int_expr): New function.
(gfc_match_name_C): Ditto.
(match_common_name): Deal with ISO C Binding in COMMON blocks
* trans-io.c (transfer_expr): Deal with C_NULL_PTR or C_NULL_FUNPTR
expressions
* match.h: Add prototypes for gfc_match_small_int_expr,
gfc_match_name_C, match_common_name, set_com_block_bind_c,
set_binding_label, set_verify_bind_c_sym,
set_verify_bind_c_com_block, get_bind_c_idents,
gfc_match_bind_c_stmt, gfc_match_suffix, gfc_match_bind_c,
gfc_get_type_attr_spec
* parse.c (decode_statement): Use gfc_match_bind_c_stmt
(parse_derived): Init *derived_sym = NULL, and gfc_current_block
later for valiadation.
* primary.c (got_delim): Set ISO C Binding components of ts.
(match_logical_constant): Ditto.
(match_complex_constant): Ditto.
(match_complex_constant): Ditto.
(gfc_match_rvalue): Check for existence of at least one arg for
C_LOC, C_FUNLOC, and C_ASSOCIATED.
* misc.c (gfc_clear_ts): Clear ISO C Bindoing components in ts.
(get_c_kind): New function.
2007-07-01 Christopher D. Rickett <crickett@lanl.gov>
* Makefile.in: Add support for iso_c_generated_procs.c and
iso_c_binding.c.
* Makefile.am: Ditto.
* intrinsics/iso_c_generated_procs.c: New file containing helper
functions.
* intrinsics/iso_c_binding.c: Ditto.
* intrinsics/iso_c_binding.h: New file
* gfortran.map: Include the __iso_c_binding_c_* functions.
* libgfortran.h: define GFC_NUM_RANK_BITS.
2007-06-23 Christopher D. Rickett <crickett@lanl.gov>
* bind_c_array_params.f03: New files for Fortran 2003 ISO C Binding.
* bind_c_coms.f90: Ditto.
* bind_c_coms_driver.c: Ditto.
* bind_c_dts.f90: Ditto.
* bind_c_dts_2.f03: Ditto.
* bind_c_dts_2_driver.c: Ditto.
* bind_c_dts_3.f03: Ditto.
* bind_c_dts_4.f03: Ditto.
* bind_c_dts_driver.c: Ditto.
* bind_c_implicit_vars.f03: Ditto.
* bind_c_procs.f03: Ditto.
* bind_c_usage_2.f03: Ditto.
* bind_c_usage_3.f03: Ditto.
* bind_c_usage_5.f03: Ditto.
* bind_c_usage_6.f03: Ditto.
* bind_c_usage_7.f03: Ditto.
* bind_c_vars.f90: Ditto.
* bind_c_vars_driver.c: Ditto.
* binding_c_table_15_1.f03: Ditto.
* binding_label_tests.f03: Ditto.
* binding_label_tests_10.f03: Ditto.
* binding_label_tests_10_main.f03: Ditto.
* binding_label_tests_11.f03: Ditto.
* binding_label_tests_11_main.f03: Ditto.
* binding_label_tests_12.f03: Ditto.
* binding_label_tests_13.f03: Ditto.
* binding_label_tests_13_main.f03: Ditto.
* binding_label_tests_14.f03: Ditto.
* binding_label_tests_2.f03: Ditto.
* binding_label_tests_3.f03: Ditto.
* binding_label_tests_4.f03: Ditto.
* binding_label_tests_5.f03: Ditto.
* binding_label_tests_6.f03: Ditto.
* binding_label_tests_7.f03: Ditto.
* binding_label_tests_8.f03: Ditto.
* binding_label_tests_9.f03: Ditto.
* c_assoc.f90: Ditto.
* c_assoc_2.f03: Ditto.
* c_f_pointer_shape_test.f90: Ditto.
* c_f_pointer_tests.f90: Ditto.
* c_f_tests_driver.c: Ditto.
* c_funloc_tests.f03: Ditto.
* c_funloc_tests_2.f03: Ditto.
* c_funloc_tests_3.f03: Ditto.
* c_funloc_tests_3_funcs.c: Ditto.
* c_kind_params.f90: Ditto.
* c_kind_tests_2.f03: Ditto.
* c_kinds.c: Ditto.
* c_loc_driver.c: Ditto.
* c_loc_test.f90: Ditto.
* c_loc_tests_2.f03: Ditto.
* c_loc_tests_2_funcs.c: Ditto.
* c_loc_tests_3.f03: Ditto.
* c_loc_tests_4.f03: Ditto.
* c_loc_tests_5.f03: Ditto.
* c_loc_tests_6.f03: Ditto.
* c_loc_tests_7.f03: Ditto.
* c_loc_tests_8.f03: Ditto.
* c_ptr_tests.f03: Ditto.
* c_ptr_tests_10.f03: Ditto.
* c_ptr_tests_5.f03: Ditto.
* c_ptr_tests_7.f03: Ditto.
* c_ptr_tests_7_driver.c: Ditto.
* c_ptr_tests_8.f03: Ditto.
* c_ptr_tests_8_funcs.c: Ditto.
* c_ptr_tests_9.f03: Ditto.
* c_ptr_tests_driver.c: Ditto.
* c_size_t_driver.c: Ditto.
* c_size_t_test.f03: Ditto.
* com_block_driver.f90: Ditto.
* global_vars_c_init.f90: Ditto.
* global_vars_c_init_driver.c: Ditto.
* global_vars_f90_init.f90: Ditto.
* global_vars_f90_init_driver.c: Ditto.
* interop_params.f03: Ditto.
* iso_c_binding_only.f03: Ditto.
* iso_c_binding_rename_1.f03: Ditto.
* iso_c_binding_rename_1_driver.c: Ditto.
* iso_c_binding_rename_2.f03: Ditto.
* iso_c_binding_rename_2_driver.c: Ditto.
* kind_tests_2.f03: Ditto.
* kind_tests_3.f03: Ditto.
* module_md5_1.f90: Ditto.
* only_clause_main.c: Ditto.
* print_c_kinds.f90: Ditto.
* test_bind_c_parens.f03: Ditto.
* test_c_assoc.c: Ditto.
* test_com_block.f90: Ditto.
* test_common_binding_labels.f03: Ditto.
* test_common_binding_labels_2.f03: Ditto.
* test_common_binding_labels_2_main.f03: Ditto.
* test_common_binding_labels_3.f03: Ditto.
* test_common_binding_labels_3_main.f03: Ditto.
* test_only_clause.f90: Ditto.
* use_iso_c_binding.f90: Ditto.
* value_5.f90: Ditto.
* value_test.f90: Ditto.
* value_tests_f03.f90: Ditto.
From-SVN: r126185
2007-07-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32554
* io/write.c (output_float): Set edigits to a fixed size, avoiding
variation in field width calculation and eliminate buffer overrun.
From-SVN: r126173
2007-06-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32456
* io/unit.c (filename_from_unit): Don't use find_unit, instead search
for unit directly.
From-SVN: r126119
2007-06-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32456
* runtime/error.c (show_locus): Update to emit the unit number
and file name involved with the error. Use new function
filename_from_unit.
* libgfortran.h (filename_from_unit): Declare new function.
* io/unit.c (init_units): Set the unit file name for stdin, stdout,
and stderr for use later in error reporting.
(filename_from_unit): Add this new function.
From-SVN: r125989
2007-06-24 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32446
* io/write.c (output_float): Calculate ndigits correctly for large
numbered formats that must pad zeros before the decimal point.
From-SVN: r125985
2007-06-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32235
* io/transfer.c (st_read): Remove test for end of file condition.
(next_record_r): Add test for end of file condition.
From-SVN: r125606
2007-05-27 Janne Blomqvist <jb@gcc.gnu.org>
* runtime/string.c (compare0): Use gfc_charlen_type instead of int.
(fstrlen): Likewise.
(find_option): Likewise.
(fstrcpy): Use gfc_charlen_type instead of int, return length.
(cf_strcpy): Likewise.
* libgfortran.h: Change string prototypes to use gfc_charlen_type.
* io/open.c (new_unit): Use snprintf if available.
* io/list_read.c (nml_touch_nodes): Use memcpy instead of strcpy/strcat.
(nml_read_obj): Likewise.
* io/transfer.c (st_set_nml_var): Likewise.
* io/write.c (output_float): Use snprintf if available.
(nml_write_obj) Use memcpy instead of strcpy/strcat.
From-SVN: r125100
2007-05-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (unformatted_read): Use size from front end eliminating
use of size_from_real_kind. (unformatted_write): Ditto.
From-SVN: r125064
2007-05-06 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31201
* runtime/error.c (runtime_error_at): New function.
(generate_error): Export this function.
* gfortran.map: Add _gfortran_generate_error and
_gfortran_runtime_error_at.
* libgfortran.h: Add comment to reference error codes in front end.
(library_start): Locate prototype with library_end macro and add
a new comment. Add prototype for runtime_error_at. Export prototype for
generate_error.
* io/lock.c (library_start): Fix check for error condition.
* io/transfer.c (data_transfer_init): Add library check.
From-SVN: r124479
PR libfortran/31210
* io/transfer.c (transfer_character): Avoid passing a NULL
pointer as source to the transfer routines, if the string length
is zero.
From-SVN: r124428
2007-04-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31501
* io/list_read.c (next_char): Fix whitespace.
* io/io.h: Remove prototypes and define macros for is_array_io,
is_stream_io, and is_internal_unit.
* io/unit.c (is_array_io), (is_internal_unit), (is_stream_io): Delete
these functions.
* io/transfer.c (read_sf): Change handling of internal_unit to make a
single call to salloc_r and use memcpy to transfer the data.
From-SVN: r124266
2007-04-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31532
* io/file_pos.c (st_backspace): Set flags.position for end of file
condition and use new function update_position.
(st_endfile): Use new function update_position.
* io/io.h: Add prototype for new function.
* io/inquire.c (inquire_via_unit): If not direct access, set NEXTREC
to zero.
* io/unit.c (update_position): New function to update position info
used by inquire.
* io/transfer.c (next_record): Fix typo and use new function.
From-SVN: r124252
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* io/transfer.c (read_block_direct): Instead of calling us_read,
set dtp->u.p.current_unit->current_record = 0 so that pre_position
will read the record marker.
(data_transfer_init): For different error conditions, call
generate_error, then return.
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* gfortran.dg/backspace_8.f: New test case.
From-SVN: r124079
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/open.c (test_endfile): Delete this function.
(edit_modes): Delete call to test_endfile.
(new_unit): Likewise.
* io/io.h: Delete prototype for test_endfile.
* io/transfer.c (next_record_r): Remove use of test_endfile.
(st_read): Add test for end file condition and adjust status.
From-SVN: r123403
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31366
* io/transfer.c (read_block_direct): Do not generate error when reading
past EOF on a short record that is less than the RECL= specified.
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31207
* io/unit.c (close_unit_1): If there are bytes previously written from
ADVANCE="no", move to the end before closing.
From-SVN: r123401
2007-03-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/transfer.c (next_record_r): Do not call test_endfile if in namelist
mode.
From-SVN: r123284
2007-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31199
*io/io.h: Add saved_pos to gfc_unit structure.
*io/open.c (new_unit): Initialize saved_pos.
*io/transfer.c (data_transfer_init): Set max_pos to value in saved_pos.
(next_record_w): Fix whitespace.
(finalze_transfer): Calculate max_pos for ADVANCE="no" and save it for
later use. If not ADVANCE="no" set saved_pos to zero.
From-SVN: r123205
2007-03-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/file_position (st_rewind): Fix comments. Remove use of
test_endfile. Don't seek if already at 0 position. Use new is_special
function to set endfile state.
* io/open.c (test_endfile): Delete this function.
* io/io.h: Delete prototype for test_endfile. Add prototype
for is_special.
* io/unix.c (is_special): New function. Fix whitespace.
* io/transfer.c (next_record_r): Remove use of test_endfile.
From-SVN: r123038
2007-03-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31051
* io/transfer.c (formatted_transfer_scalar): Adjust position for pending
spaces when in writing mode. Clean up some formatting.
From-SVN: r122940
2007-03-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31099
* io/open.c (new_unit): Initialize bytes_left and recl_subrecord.
* io/transfer.c (next_record_w): Set bytes left to record length for
sequential unformatted I/O.
(next_record_r): Ditto.
(read_block_direct): Fix test for exceeding bytes_left.
From-SVN: r122763
2007-02-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30910
* io/write.c (output_float): Add condition of format F only for
special case rounding with zero precision.
From-SVN: r122250
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* trans-expr.c (gfc_conv_aliased_arg): Remove static attribute
from function and make sure that substring lengths are
translated.
(is_aliased_array): Remove static attribute.
* trans.c : Add prototypes for gfc_conv_aliased_arg and
is_aliased_array.
* trans-io.c (set_internal_unit): Add the post block to the
arguments of the function. Use is_aliased_array to check if
temporary is needed; if so call gfc_conv_aliased_arg.
(build_dt): Pass the post block to set_internal_unit and
add to the block after all io activiy is done.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* io/transfer.c (init_loop_spec, next_array_record): Change to
lbound rather than unity base.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
* gfortran.dg/arrayio_11.f90.f90: New test.
PR fortran/30626
* gfortran.dg/arrayio_12.f90.f90: New test.
From-SVN: r121500
2007-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30162
* io/unix.c (fd_flush): Don't seek if file is not seekable, defined as
s->file_length == -1.
(fd_alloc_w_at): Do not adjust file_length if file is not seekable.
(fd_seek): If not seekable, just return success.
(fd_truncate): If not seekable, no need to truncate. Return failure if
seek fails and the stream is not a pipe.
(fd_to_stream): Make test for non-seekable file more robust.
From-SVN: r120512
2006-12-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30014
*io/io.h (st_parameter_dt): Change *size and *iolength type to
GFC_IO_INT.
*io/transfer.c (finalize_transfer): Cast dtp->u.p.size_used to
GFC_IO_INT. (iolength_transfer): Cast size * nelems to GFC_IO_INT.
From-SVN: r120234
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* gfortran.dg/read_eof_4.f90: Add tests.
* gfortran.dg/readwrite_unf_direct_eor_1.f90: New test.
* gfortran.dg/unf_read_corrupted_1.f90: New test.
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* libgfortran.h: Add ERROR_CORRUPT_FILE to error_codes.
* runtime/error.c (translate_error): Add handling for
ERROR_CORRUPT_FILE.
* io/transfer.c (read_block_direct): Add comment about
EOR for stream files.
Remove test for no bytes left for direct access files.
Generate an ERROR_SHORT_RECORD if the read was short.
For unformatted sequential files: Check endfile condition.
Remove test for no bytes left. End of file here means
that the file structure has been corrupted. Pre-position
the file for the next record in case of error.
(write_buf): Whitespace fix. Subtract the number of bytes
written from bytes_left.
From-SVN: r119592
2006-12-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/30005
* io/open.c: Add errno.h include.
(new_unit): Add new error messages with file name for file open.
From-SVN: r119530
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.dg/convert_implied_open.f90: Change to
new default record length.
* gfortran.dg/unf_short_record_1.f90: Adapt to
new error message.
* gfortran.dg/unformatted_subrecords_1.f90: New test.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.h (gfc_option_t): Add max_subrecord_length.
(top level): Define MAX_SUBRECORD_LENGTH.
* lang.opt: Add option -fmax-subrecord-length=.
* trans-decl.c: Add new function set_max_subrecord_length.
(gfc_generate_function_code): If we are within the main
program and max_subrecord_length has been set, call
set_max_subrecord_length.
* options.c (gfc_init_options): Add defaults for
max_subrecord_lenght, convert and record_marker.
(gfc_handle_option): Add handling for
-fmax_subrecord_length.
* invoke.texi: Document the new default for
-frecord-marker=<n>.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* libgfortran/libgfortran.h (compile_options_t): Add
record_marker. (top level): Define GFC_MAX_SUBRECORD_LENGTH.
* runtime/compile_options.c (set_record_marker): Change
default to four-byte record marker.
(set_max_subrecord_length): New function.
* runtime/error.c (translate_error): Change error message
for short record on unformatted read.
* io/io.h (gfc_unit): Add recl_subrecord, bytes_left_subrecord
and continued.
* io/file_pos.c (unformatted_backspace): Change default of record
marker size to four bytes. Loop over subrecords.
* io/open.c: Default recl is max_offset. If
compile_options.max_subrecord_length has been set, set set
u->recl_subrecord to its value, to the maximum value otherwise.
* io/transfer.c (top level): Add prototypes for us_read, us_write,
next_record_r_unf and next_record_w_unf.
(read_block_direct): Separate codepaths for unformatted direct
and unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(write_buf): Separate codepaths for unformatted direct and
unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(us_read): Add parameter continued (to indicate that bytes_left
should not be intialized). Change default of record marker size
to four bytes. Use subrecord. If the subrecord length is smaller than
zero, this indicates a continuation.
(us_write): Add parameter continued (to indicate that the continued
flag should be set). Use subrecord.
(pre_position): Use 0 for continued on us_write and us_read calls.
(skip_record): New function.
(next_record_r_unf): New function.
(next_record_r): Use next_record_r_unf.
(write_us_marker): Default size for record markers is four bytes.
(next_record_w_unf): New function.
(next_record_w): Use next_record_w_unf.
From-SVN: r119412
2006-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/io.h (unit_flags): Add new flag has_recl.
* io.open.c (new_unit): Set flag if RECL= was specified.
* io/transfer.c (us_write): If flag set, leave recl as initialized by
new_unit.
From-SVN: r119087
* trans-decl.c (gfc_get_symbol_decl): Fix formatting.
* io/open.c (new_unit): Format %d expects an int variable.
* runtime/error.c (show_locus): Format %d expects an int variable.
From-SVN: r118887
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* libgfortran.h: Add ERROR_SHORT_RECORD
* runtime/error.c (translate_error): Add case
for ERROR_SHORT_RECORD.
* io/transfer.c (read_block_direct): Separate codepaths
for stream and record unformatted I/O. Remove unneeded
tests for standard input, padding and formatted I/O.
If the record is short, read in as much data as possible,
then raise the error.
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* gfortran.dg/unf_short_record_1.f90: New test.
From-SVN: r118341
2006-10-28 Tobias Burnus <burnus@net-b.de>
PR fortran/29625
* io/transfer.c (formatted_transfer_scalar): Allow binary edit
descriptors for real variables; give error for BOZ edit
descriptor for non-integers when using -std=f*.
From-SVN: r118111
2006-10-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29563
* io/io.h (st_parameter_dt): Add new flag at_eof.
* io/list_read.c (next_char): Set flag when EOF and return '\n' to
signal EOR. Check flag on next call and jump out.
* io/unit.c (get_internal_unit): Initialize new flag.
From-SVN: r118059
2006-10-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29277
* io/write.c (write_a): Add conversion of LF to CR-LF for systems with
#define HAVE_CRLF.
From-SVN: r117866
2006-10-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29277
* io/list_read.c (next_char): Update strm_pos.
(eat_separator): Delete extra call to unget_char.
* io/transfer.c (read_block): Use read_sf for formatted stream I/O.
(next_record_r): Update strm_pos for formatted stream I/O and handle
end-of-record correctly.
(next_record_w): Ditto.
(next_record): Enable next record (r/w) functions and update strm_pos.
(finalize_transfer): Call next_record to finish the record.
From-SVN: r117846
2006-08-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/28354
* io/write.c: Check for special case of zero precision in format
and pre-round the real value.
From-SVN: r116502
2006-08-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25828
* libgfortran.h: Rename GFC_LARGE_IO_INT to GFC_IO_INT.
* io/file_pos.c (st_backspace): Ignore if access=STREAM.
(st_rewind): Handle case of access=STREAM.
* io/open.c (access_opt): Add STREAM_ACCESS.
(edit_modes): Set current_record to zero only if not STREAM.
(new_unit): Initialize maxrec, recl, and last_record for STREAM.
* io/read.c (read_x): Advance file position for STREAM.
* io/io.h (enum unit_access): Align IOPARM flags with frontend.
Add ACCESS_STREAM. Add prototype for is_stream_io () function.
Use GFC_IO_INT.
* io/inquire.c (inquire_via_unit): Add text for access = "STREAM".
* io/unit.c (is_stream_io): New function to return true if access =
STREAM.
* io/transfer.c (file_mode): Add modes for unformatted stream and
formatted stream. (current_mode): Return appropriate file mode based
on access flags.
(read_block): Handle formatted stream reads.
(read_block_direct): Handle unformatted stream reads.
(write_block): Handle formatted stream writes.
(write_buf): Handle unformatted stream writes.
(unformatted_read): Fix up, use temporary for size.
(pre_position): Position file for STREAM access.
(data_transfer_init): Initialize for stream access, skip irrelevent
error checks.
(next_record_r),(next_record_w), and (next_record): Do nothing for
stream I/O.
(finalize_transfer): Flush when all done if stream I/O.
From-SVN: r116172
2006-07-30 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/28335
* file_position.c (st_flush): Add clearer error when UNIT does not
exist. Add reference to standard in comment.
From-SVN: r115835
PR libgfortran/258335
* close.c (st_close): Add error when UNIT does not exist.
* file_position.c (st_flush): Add error when UNIT does not exist.
From-SVN: r115749
2006-07-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/28339
* io/transfer.c (next_record_w): Use next_array_record result to set
END_FILE. (write_block): Test for END_FILE before the next write occurs.
* io/unit.c (get_internal_unit): Initialize iunit->endfile for internal
unit.
From-SVN: r115670
2006-07-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27704
* runtime/error.c (notify_std): Pass common flags into function. Use
flags to show locus of error or warning.
* libgfortran.h: Add enum try. Add prototype for notify_std.
* io/open.c (edit_modes): Allow status="old" and add extension to
allow status="scratch"
*io/list_read.c (nml_read_obj): Update call to notify_std.
*io/io.h: Remove enum try and prototype for notify_std.
*io/transfer.c (read_sf): Update call to notify_std.
*io/format.c (parse_format_list): Update call to notify_std.
From-SVN: r115168
2006-05-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27634
* io/format.c (parse_format_list): Allow missing period in format only
if -std=legacy.
From-SVN: r114212
2006-05-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/24459
* io/list_read.c (nml_parse_qualifier): Leave loop spec end value
at default value unless -std=f95 or if an array section
is specified in namelist input. Warn if -pedantic.
* io/io.h (st_parameter_dt): Add expanded_read flag.
From-SVN: r113924
2006-05-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27575
* io/transfer.c (read_block): Add check for end file condition.
(read_block_direct): Add check for end file condition.
From-SVN: r113837
2006-04-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/20257
* io/io.h: Add prototypes for get_internal_unit and free_internal_unit.
* io/unit.c (get_internal_unit): Initialize unit number, not zero.
(free_internal_unit): New function to consolidate freeing memory.
(get_unit): Initialize internal_unit_desc to NULL when unit is
external.
* io/unix.c (mem_close): Check for not NULL before freeing memory.
* io/transfer.c (read_block): Reset bytes_left and skip error if unit
is preconnected and default record length is reached.
(read_block_direct): Ditto.
(write_block): Ditto.
(write_buf): Ditto.
(data_transfer_init): Only flush if not internal unit.
(finalize_transfer): Ditto and delete code to free memory used by
internal units.
(st_read_done): Use new function - free_internal_unit.
(st_write_done): Use new function - free_internal unit.
From-SVN: r113190
2006-04-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27138
* io/list_read.c (eat_line): New function.
(parse_repeat): Use new function and free_saved.
(read_logical): Same.
(read_integer): Use new function.
(parse_real): Use nml_bad_return and new function.
(read_complex): Use new function and free_saved.
(read_real): Same.
From-SVN: r112999
2006-04-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26766
* io/io.h: Add bit to identify associated unit as internal.
* io/unit.c (get_external_unit): Renamed the find_unit_1 function to
reflect the external unit functionality vs internal unit.
(get_internal_unit): New function to allocate and initialize an internal
unit structure.
(get_unit): Use get_internal_unit and get_external_unit.
(is_internal_unit): Revised to use new bit added in io.h.
* io/transfer.c (data_transfer_init): Fix line width.
(st_read_done): Free memory allocated for internal unit.
(st_write_done): Add test to only flush and truncate when not an
internal unit. Free memory allocated for internal unit.
From-SVN: r112914
PR libgfortran/24685
* io/write.c (MIN_FIELD_WIDTH, STR, STR1): Define.
(output_float): Increase buffer sizes for IEEE quad and IBM extended
long double.
(write_real): Output REAL(16) as 1PG43.34E4 rather than 1PG40.31E4.
From-SVN: r112819
2006-04-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26890
* io/io.h: Revert change to pad size made on 2006-03-30.
Add comment explaining dependency with fortran/trans-io.c.
From-SVN: r112769
2006-04-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/write.c (output_float): Update condition to not error when
decimal precision in format specifier is zero.
From-SVN: r112656
2006-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26661
* io/io.h: Add read_sf so it can be used by read_x.
* io/transfer.c (read_sf): Pass no_error flag to read_sf. Use it to
break out rather than error on EOF or EOR conditions.
(read_block): Update call to read_sf.
(read_block_direct): Ditto.
* io/read.c (read_x): Use the modified read_sf instead of read_block.
From-SVN: r112390
2006-03-25 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/26735
* io/transfer.c (data_transfer_init): Set u_flags.convert
on an unopened unit if specified by environment variable
(via get_unformatted_convert) or by compile-time option.
2006-03-25 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/26735
* gfortran.dg/convert_implied_open.f90: New test case.
From-SVN: r112382
2006-03-22 Thomas Koenig <Thomas.Koenig@onlien.de>
PR fortran/19303
* gfortran.h (gfc_option_t): Add record_marker.
* lang.opt: Add -frecord-marker=4 and -frecord-marker=8.
* trans-decl.c: Add gfor_fndecl_set_record_marker.
(gfc_build_builtin_function_decls): Set
gfor_fndecl_set_record_marker.
(gfc_generate_function_code): If we are in the main program
and -frecord-marker was provided, call set_record_marker.
* options.c (gfc_handle_option): Add handling for
-frecord-marker=4 and -frecord-marker=8.
* invoke.texi: Document -frecord-marker.
2006-03-22 Thomas Koenig <Thomas.Koenig@onlien.de>
PR fortran/19303
* libgfortran.h (compile_options_t): Add record_marker.
* runtime/compile_options.c (set_record_marker):
New function.
* io/open.c: If we have four-byte record markers, use
GFC_INTEGER_4_HUGE as default record length.
* io/file_pos.c (unformatted_backspace): Handle
different size record markers.
* io/transfer.c (us_read): Likewise.
(us_write): Likewise.
(next_record_r): Likewise.
(write_us_marker): Likewise.
(next_record_w): Likewise.
2006-03-22 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/19303
* gfortran.dg/record_marker_1.f90: New test case.
* gfortran.dg/record_marker_2.f: New test case.
* gfortran.dg/record_marker_3.f90: New test case.
From-SVN: r112290
2006-03-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26509
* libgfortran.h: Add ERROR_DIRECT_EOR.
* runtime/error.c (translate_error): Add translation for new error.
* io/transfer.c (write_buf): Add check for EOR when mode is
direct access.
From-SVN: r112198
2006-03-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26554
* io/list_read.c (read_logical): Return the value if not in namelist
mode.
From-SVN: r111738
2006-02-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26136
* io/io.h: Add flag for reading from line_buffer.
* io/list_read.c (l_push_char): New function to save namelist
input when reading logicals.
(free_line): New function to free line_buffer memory.
(next_char): Added feature to read from line_buffer.
(read_logical): Use new functions to test for '=' after reading a
logical value, checking for possible variable name.
(namelist_read): Use free_line when all done.
From-SVN: r111597
PR libfortran/21303
* gfortran.h (notification): New enumeration.
(gfc_notification_std): Prototype for the new function.
* error.c (gfc_notification_std): New function.
* io.c (check_format): Handle the case of a L format descriptor
without a width.
* runtime/error.c (notification_std): New function.
* libgfortran.h (notification): New enumeration.
* io/io.h (notification_std): Prototype for the new function.
* io/format.c (parse_format_list): Handle the case of a L format
descriptor without a width.
* gcc/testsuite/gfortran.dg/fmt_l.f90: New test.
From-SVN: r111281
2006-02-12 Janne Blomqvist <jb@gcc.gnu.org>
PR libgfortran/25949
* io/io.h: Add set function pointer to struct stream.
* io/unix.c (fd_seek): Only update offset, don't seek.
(fd_sset): New function.
(fd_read): Call lseek directly if necessary.
(fd_write): Likewise.
(fd_open): Set pointer to fd_sset.
(mem_set): New function.
(open_internal): Set pointer to mem_set.
* io/transfer.c (write_block_direct): Rename to write_buf, add
error return, non-pointer length argument.
(unformatted_write): Update to use write_buf.
(us_write): Simplify by using swrite instead of salloc_w.
(write_us_marker): New function.
(new_record_w): Use sset instead of memset, use write_us_marker,
simplify by using swrite instead of salloc_w.
From-SVN: r110895
PR libfortran/25425
* trans-decl.c (gfc_generate_function_code): Add new argument,
pedantic, to set_std call.
* libgfortran.h: Add pedantic field to compile_options struct.
* io/write.c (calculate_G_format): Depending on the standard,
choose E or F format for list-directed output of 0.0.
* runtime/error.c (notify_std): Make warning and error dependent
on pedanticity.
* runtime/compile_options.c (set_std): Use new pedantic argument.
From-SVN: r110769
2005-02-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/23815
* gfortran.texi: Document the GFORTRAN_CONVERT_UNIT environment
variable.
* invoke.texi: Mention the "Runtime" chapter.
Document the -fconvert= option.
* gfortran.h: Add options_convert.
* lang.opt: Add fconvert=little-endian, fconvert=big-endian,
fconvert=native and fconvert=swap.
* trans-decl.c (top level): Add gfor_fndecl_set_convert.
(gfc_build_builtin_function_decls): Set gfor_fndecl_set_convert.
(gfc_generate_function_code): If -fconvert was specified,
and this is the main program, add a call to set_convert().
* options.c: Handle the -fconvert options.
2005-02-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/23815
* runtime/environ.c (init_unformatted): Add GFORTRAN_CONVERT_UNIT
environment variable.
(top level): Add defines, type and static variables for
GFORTRAN_CONVERT_UNIT handling.
(search_unit): New function.
(match_word): New function.
(match_integer): New function.
(next_token): New function.
(push_token): New function.
(mark_single): New function.
(mark_range): New funciton.
(do_parse): New function.
(init_unformatted): New function.
(get_unformatted_convert): New function.
* runtime/compile_options.c: Add set_convert().
* libgfortran.h: Add convert to compile_options_t.
* io/open.c (st_open): Call get_unformatted_convert to get
unit default; if CONVERT_NONE is returned, check for
the presence of a CONVERT specifier and use it.
As default, use compile_options.convert.
* io/io.h (top level): Add CONVERT_NONE to unit_convert, to signal
"nothing has been set".
(top level): Add prototype for get_unformatted_convert.
2005-02-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/23815
* unf_io_convert_4.f90: New test.
From-SVN: r110664
PR libfortran/24685
* io/write.c (write_real): Widen the default format for real(10)
variables output.
* gfortran.dg/large_real_kind_form_io_2.f90: New test.
From-SVN: r110627
2006-01-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25697
* io/transfer.c (us_read): Detect end of file condition from previous
operations and bail out (no need to pre-position).
From-SVN: r109870
2006-01-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25631
* io/transfer.c (formatted_transfer_scalar): Adjust pending_spaces and
skips so that TL works correctly when no bytes_used yet.
From-SVN: r109858
2006-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25598
* io/file_pos.c (unformatted_backspace): Assure the new file position
to seek is not less than zero.
(st_backspace): Set unit bytes_left to zero.
* io/transfer.c (next_record_r): Fix line lengths, no functional change.
From-SVN: r109405
2005-12-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25594
PR libgfortran/25419
* io/list_read.c (list_formatted_read_scalar): Test for comma to return
a null value (default). Revert patch of 25419 on 2005-12-28.
From-SVN: r109211
2005-12-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25139
* io/unix.c (fd_truncate): Set s->active to zero.
PR libgfortran/25510
* libgfortran.h: Add ERROR_INTERNAL and ERROR_INTERNAL_UNIT.
* runtime/error.c (translate_error): Add messages for new errors.
* io/list_read.c (next_char): Use new errors.
* io/transfer.c (next_record_r) (next_record_w): Use new errors.
From-SVN: r109122
2005-12-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25550
* io/file_pos.c (st_rewind): Reset bytes left so no error occurs in
next_record_r.
From-SVN: r109101
2005-12-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25419
* io/list_read.c (list_formatted_read_scalar): Allow comma to return a
null value (default).
From-SVN: r109099
2005-12-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25307
* io/list_read.c (next_char): Handle end-of-file conditions for
internal units and add support for internal character array units.
From-SVN: r108938
2005-12-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25463
* io/transfer.c (finalize_transfer): Fix execution order so that
next_record is set to zero in all cases.
From-SVN: r108784
2005-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25264
PR libgfortran/25349
* io/unit.c (get_unit): Delete code that cleared the string when the
unit was opened, which is too soon.
* io/transfer.c (next_record_w): Pass done flag in. Change logic for
setting max_pos. Add code to position unit and pad record as needed.
From-SVN: r108671
2005-12-10 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/23815
* io.c (top level): Add convert to io_tag.
(resolve_tag): convert is GFC_STD_GNU.
(match_open_element): Add convert.
(gfc_free_open): Likewise.
(gfc_resolve_open): Likewise.
(gfc_free_inquire): Likewise.
(match_inquire_element): Likewise.
* dump-parse-tree.c (gfc_show_code_node): Add
convet for open and inquire.
gfortran.h: Add convert to gfc_open and gfc_inquire.
* trans-io.c (gfc_trans_open): Add convert.
(gfc_trans_inquire): Likewise.
* ioparm.def: Add convert to open and inquire.
* gfortran.texi: Document CONVERT.
2005-12-10 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/23815
* io/file_pos.c (unformatted_backspace): If flags.convert
does not equal CONVERT_NATIVE, reverse the record marker.
* io/open.c: Add convert_opt[].
(st_open): If no convert option is given, set CONVERT_NATIVE.
If CONVERT_BIG or CONVERT_LITTLE are given, set flags.convert to
CONVERT_NATIVE or CONVERT_SWAP (depending on wether we have
a big- or little-endian system).
* io/transfer.c (unformatted_read): Remove unused attribute
from arguments.
If we need to reverse
bytes, break up large transfers into a loop. Split complex
numbers into its two parts.
(unformatted_write): Likewise.
(us_read): If flags.convert does not equal CONVERT_NATIVE,
reverse the record marker.
(next_record_w): Likewise.
(reverse_memcpy): New function.
* io/inquire.c (inquire_via_unit): Implement convert.
* io/io.h (top level): Add enum unit_convert.
Add convert to st_parameter_open and st_parameter_inquire.
Define IOPARM_OPEN_HAS_CONVERT and IOPARM_INQUIRE_HAS_CONVERT.
Increase padding for st_parameter_dt.
Declare reverse_memcpy().
2005-12-10 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/23815
* gfortran.dg/unf_io_convert_1.f90: New test.
* gfortran.dg/unf_io_convert_2.f90: New test.
* gfortran.dg/unf_io_convert_3.f90: New test.
From-SVN: r108358
2005-12-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25039
* io/io.h: Create a new flag sf_read_comma to control comma
separators in numeric reads.
* io/transfer.c (formatted_transfer_scalar): Initialize the flag.
(read_sf): Check for commas coming in and if the flag is set,
shortcut the read.
* io/read.c (read_a) (read_x): Clear the flag for character reads and
reset it after the reads.
From-SVN: r108271
PR libfortran/25116
* io/transfer.c (data_transfer_init): Don't set the default for
namelist I/O on preconnected files to UNFORMATTED.
From-SVN: r107900
2005-11-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25109
* io/unit.c (init_units): Set default flag to BLANK_NULL per
requirement of F95 standard. Set PAD_YES for stdin.
From-SVN: r107588
PR libfortran/24919
* io/list_read.c (eat_separator, finish_separator,
read_character): Handle CRLF separators correctly during reads.
(nml_query): Use the HAVE_CRLF macro to print adequate newlines.
* io/io.h (st_parameter_dt): Add comment about the possible
values for sf_seen_eor.
* io/unix.c (tempfile, regular_file): HAVE_CRLF doesn't imply
that O_BINARY is defined, so we add that condition.
(stream_at_bof): Fix typo in comment.
* io/transfer.c (read_sf): Handle correctly CRLF, setting
sf_seen_eor value to 2 instead of 1.
(formatted_transfer_scalar): Use the sf_seen_eor value to
handle CRLF the right way.
* io/write.c (nml_write_obj, namelist_write): Use CRLF as newline
when HAVE_CRLF is defined.
* gfortran.dg/ftell_1.f90: Modify testcase so that it doesn't
fail on CRLF platforms.
* gfortran.dg/ftell_2.f90: Likewise.
From-SVN: r107563
* io/list_read.c (nml_parse_qualifier): Use memcpy to extract
values from dtp->u.p.value.
* io/io.h (struct st_parameter_dt): Change reversion_flag, first_item,
seen_dollar, sf_seen_eor, eor_condition, no_leading_blank, char_flag,
input_complete, at_eol, comma_flag, namelist_mode, nml_read_error to
single-bit fields. Move value to where it'll be at least pointer
aligned.
From-SVN: r107520
2005-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/24794
* io/list_read.c (read_character): Add auto completion on short
namelist reads.
From-SVN: r107394
gcc/fortran/
PR fortran/14943
PR fortran/21647
* Make-lang.in (fortran/trans-io.o): Depend on fortran/ioparm.def.
* dump-parse-tree.c (gfc_show_code_node): Dump c->block for
EXEC_{READ,WRITE,IOLENGTH} nodes.
* io.c (terminate_io, match_io, gfc_match_inquire): Put data
transfer commands into EXEC_{READ,WRITE,IOLENGTH}'s code->block.
* resolve.c (resolve_blocks): Handle EXEC_{READ,WRITE,IOLENGTH}.
* trans-io.c (ioparm_unit, ioparm_err, ioparm_end, ioparm_eor,
ioparm_list_format, ioparm_library_return, ioparm_iostat,
ioparm_exist, ioparm_opened, ioparm_number, ioparm_named,
ioparm_rec, ioparm_nextrec, ioparm_size, ioparm_recl_in,
ioparm_recl_out, ioparm_iolength, ioparm_file, ioparm_file_len,
ioparm_status, ioparm_status_len, ioparm_access, ioparm_access_len,
ioparm_form, ioparm_form_len, ioparm_blank, ioparm_blank_len,
ioparm_position, ioparm_position_len, ioparm_action,
ioparm_action_len, ioparm_delim, ioparm_delim_len, ioparm_pad,
ioparm_pad_len, ioparm_format, ioparm_format_len, ioparm_advance,
ioparm_advance_len, ioparm_name, ioparm_name_len,
ioparm_internal_unit, ioparm_internal_unit_len,
ioparm_internal_unit_desc, ioparm_sequential, ioparm_sequential_len,
ioparm_direct, ioparm_direct_len, ioparm_formatted,
ioparm_formatted_len, ioparm_unformatted, ioparm_unformatted_len,
ioparm_read, ioparm_read_len, ioparm_write, ioparm_write_len,
ioparm_readwrite, ioparm_readwrite_len, ioparm_namelist_name,
ioparm_namelist_name_len, ioparm_namelist_read_mode, ioparm_iomsg,
ioparm_iomsg_len, ioparm_var): Remove.
(enum ioparam_type, enum iofield_type, enum iofield,
enum iocall): New enums.
(gfc_st_parameter_field, gfc_st_parameter): New typedefs.
(st_parameter, st_parameter_field, iocall): New variables.
(ADD_FIELD, ADD_STRING): Remove.
(dt_parm, dt_post_end_block): New variables.
(gfc_build_st_parameter): New function.
(gfc_build_io_library_fndecls): Use it. Initialize iocall
array rather than ioparm_*, add extra first arguments to
the function types.
(set_parameter_const): New function.
(set_parameter_value): Add type argument, return a bitmask.
Changed to set a field in automatic structure variable rather
than set a field in a global _gfortran_ioparm variable.
(set_parameter_ref): Likewise. If requested var has different
size than what field should point to, call with a temporary and
then copy into the user variable. Add postblock argument.
(set_string): Remove var_len argument, add type argument, return
a bitmask. Changed to set fields in automatic structure variable
rather than set a field in a global _gfortran_ioparm variable.
(set_internal_unit): Remove iunit, iunit_len, iunit_desc arguments,
add var argument. Return a bitmask. Changed to set fields in
automatic structure variable rather than set a field in a global
_gfortran_ioparm variable.
(set_flag): Removed.
(io_result): Add var argument. Changed to read common.flags field
from automatic structure variable and bitwise AND it with 3.
(set_error_locus): Add var argument. Changed to set fields in
automatic structure variable rather than set a field in a global
_gfortran_{filename,line} variables.
(gfc_trans_open): Use gfc_start_block rather than gfc_init_block.
Create a temporary st_parameter_* structure. Adjust callers of
all above mentioned functions. Pass address of the temporary
variable as first argument to the generated function call.
Use iocall array rather than ioparm_* separate variables.
(gfc_trans_close, build_filepos, gfc_trans_inquire): Likewise.
(build_dt): Likewise. Change first argument to tree from tree *.
Don't dereference code->ext.dt if last_dt == INQUIRE. Emit
IOLENGTH argument setup here. Set dt_parm/dt_post_end_block
variables and gfc_trans_code the nested data transfer commands
in code->block.
(gfc_trans_iolength): Just set last_dt and call build_dt immediately.
(transfer_namelist_element): Pass address of dt_parm variable
to generated functions. Use iocall array rather than ioparm_*
separate variables.
(gfc_trans_backspace, gfc_trans_endfile, gfc_trans_rewind,
gfc_trans_flush, gfc_trans_read, gfc_trans_write): Use iocall array
rather than ioparm_* separate variables.
(gfc_trans_dt_end): Likewise. Pass address of dt_parm variable
as first argument to generated function. Adjust io_result caller.
Prepend dt_post_end_block before io_result code.
(transfer_expr): Use iocall array rather than ioparm_* separate
variables. Pass address of dt_parm variables as first argument
to generated functions.
* ioparm.def: New file.
gcc/testsuite/
PR fortran/24774
* gfortran.dg/inquire_9.f90: New test.
PR fortran/21647
* gfortran.fortran-torture/execute/inquire_5.f90: New test.
libgfortran/
PR fortran/24774
PR fortran/14943
PR fortran/21647
* Makefile.am (AM_CPPFLAGS): Add gcc directories as -I paths,
add -D_GNU_SOURCE.
* Makefile.in: Regenerated.
* acinclude.m4 (LIBGFOR_CHECK_SYNC_FETCH_AND_ADD,
LIBGFOR_CHECK_GTHR_DEFAULT, LIBGFOR_CHECK_PRAGMA_WEAK): New macros.
* configure.ac: Add them.
* configure: Rebuilt.
* config.h.in: Rebuilt.
* libtool-version: Bump libgfortran.so SONAME to libgfortran.so.1.
* libgfortran.h (library_start, show_locus, internal_error,
generate_error, find_option): Add st_parameter_common * argument.
(library_end): Change into a dummy macro.
* io/io.h: Include gthr.h.
(SUPPORTS_WEAK): Define if HAVE_PRAGMA_WEAK.
(CHARACTER): Remove define.
(st_parameter, global_t): Remove typedef.
(ioparm, g, ionml, current_unit): Remove variables.
(init_error_stream): Remove prototype.
(CHARACTER1, CHARACTER2): Define.
(st_parameter_common, st_parameter_open, st_parameter_close,
st_parameter_filepos, st_parameter_inquire, st_parameter_dt): New
typedefs.
(IOPARM_LIBRETURN_MASK, IOPARM_LIBRETURN_OK, IOPARM_LIBRETURN_ERROR,
IOPARM_LIBRETURN_END, IOPARM_LIBRETURN_EOR, IOPARM_ERR, IOPARM_END,
IOPARM_EOR, IOPARM_HAS_IOSTAT, IOPARM_HAS_IOMSG, IOPARM_COMMON_MASK,
IOPARM_OPEN_HAS_RECL_IN, IOPARM_OPEN_HAS_FILE, IOPARM_OPEN_HAS_STATUS,
IOPARM_OPEN_HAS_ACCESS, IOPARM_OPEN_HAS_FORM, IOPARM_OPEN_HAS_BLANK,
IOPARM_OPEN_HAS_POSITION, IOPARM_OPEN_HAS_ACTION,
IOPARM_OPEN_HAS_DELIM, IOPARM_OPEN_HAS_PAD, IOPARM_CLOSE_HAS_STATUS,
IOPARM_INQUIRE_HAS_EXIST, IOPARM_INQUIRE_HAS_OPENED,
IOPARM_INQUIRE_HAS_NUMBER, IOPARM_INQUIRE_HAS_NAMED,
IOPARM_INQUIRE_HAS_NEXTREC, IOPARM_INQUIRE_HAS_RECL_OUT,
IOPARM_INQUIRE_HAS_FILE, IOPARM_INQUIRE_HAS_ACCESS,
IOPARM_INQUIRE_HAS_FORM, IOPARM_INQUIRE_HAS_BLANK,
IOPARM_INQUIRE_HAS_POSITION, IOPARM_INQUIRE_HAS_ACTION,
IOPARM_INQUIRE_HAS_DELIM, IOPARM_INQUIRE_HAS_PAD,
IOPARM_INQUIRE_HAS_NAME, IOPARM_INQUIRE_HAS_SEQUENTIAL,
IOPARM_INQUIRE_HAS_DIRECT, IOPARM_INQUIRE_HAS_FORMATTED,
IOPARM_INQUIRE_HAS_UNFORMATTED, IOPARM_INQUIRE_HAS_READ,
IOPARM_INQUIRE_HAS_WRITE, IOPARM_INQUIRE_HAS_READWRITE,
IOPARM_DT_LIST_FORMAT, IOPARM_DT_NAMELIST_READ_MODE,
IOPARM_DT_HAS_REC, IOPARM_DT_HAS_SIZE, IOPARM_DT_HAS_IOLENGTH,
IOPARM_DT_HAS_FORMAT, IOPARM_DT_HAS_ADVANCE,
IOPARM_DT_HAS_INTERNAL_UNIT, IOPARM_DT_HAS_NAMELIST_NAME,
IOPARM_DT_IONML_SET): Define.
(gfc_unit): Add lock, waiting and close fields. Change file
from flexible array member into pointer to char.
(open_external): Add st_parameter_open * argument.
(find_file, file_exists): Add file and file_len arguments.
(flush_all_units): New prototype.
(max_offset, unit_root, unit_lock): New variable.
(is_internal_unit, is_array_io, next_array_record,
parse_format, next_format, unget_format, format_error,
read_block, write_block, next_record, convert_real,
read_a, read_f, read_l, read_x, read_radix, read_decimal,
list_formatted_read, finish_list_read, namelist_read,
namelist_write, write_a, write_b, write_d, write_e, write_en,
write_es, write_f, write_i, write_l, write_o, write_x, write_z,
list_formatted_write, get_unit): Add st_parameter_dt * argument.
(insert_unit): Remove prototype.
(find_or_create_unit, unlock_unit): New prototype.
(new_unit): Return gfc_unit *. Add st_parameter_open *
and gfc_unit * arguments.
(free_fnodes): Remove prototype.
(free_format_data): New prototype.
(scratch): Remove.
(init_at_eol): Remove prototype.
(free_ionml): New prototype.
(inc_waiting_locked, predec_waiting_locked, dec_waiting_unlocked):
New inline functions.
* io/unit.c (max_offset, unit_root, unit_lock): New variables.
(insert): Adjust os_error caller.
(insert_unit): Made static. Allocate memory here, initialize
lock and after inserting it return it, locked.
(delete_unit): Adjust for deletion of g.
(find_unit_1): New function.
(find_unit): Use it.
(find_or_create_unit): New function.
(get_unit): Add dtp argument, change meaning of the int argument
as creation request flag. Adjust for different st_* calling
conventions, lock internal unit's lock before returning it
and removal of g. Call find_unit_1 instead of find_unit.
(is_internal_unit, is_array_io): Add dtp argument, adjust for
removal of most of global variables.
(init_units): Initialize unit_lock. Adjust insert_unit callers
and adjust for g removal.
(close_unit_1): New function.
(close_unit): Use it.
(unlock_unit): New function.
(close_units): Lock unit_lock, use close_unit_1 rather than
close_unit.
* io/close.c (st_close): Add clp argument. Adjust for new
st_* calling conventions and internal function API changes.
* io/file_pos.c (st_backspace, st_endfile, st_rewind, st_flush):
Add fpp argument. Adjust for new st_* calling conventions and
internal function API changes.
(formatted_backspace, unformatted_backspace): Likewise. Add
u argument.
* io/open.c (edit_modes, st_open): Add opp argument. Adjust for
new st_* calling conventions and internal function API changes.
(already_open): Likewise. If not HAVE_UNLINK_OPEN_FILE, unlink
scratch file. Instead of calling close_unit just call sclose,
free u->file if any and clear a few u fields before calling
new_unit.
(new_unit): Return gfc_unit *. Add opp and u arguments.
Adjust for new st_* calling conventions and internal function
API changes. Don't allocate unit here, rather than work with
already created unit u already locked on entry. In case
of failure, close_unit it.
* io/unix.c: Include unix.h.
(BUFFER_SIZE, unix_stream): Moved to unix.h.
(unit_to_fd): Add unlock_unit call.
(tempfile): Add opp argument, use its fields rather than ioparm.
(regular_file): Likewise.
(open_external): Likewise. Only unlink file if fd >= 0.
(init_error_stream): Add error argument, set structure it points
to rather than filling static variable and returning its address.
(FIND_FILE0_DECL, FIND_FILE0_ARGS): Define.
(find_file0): Use them. Don't crash if u->s == NULL.
(find_file): Add file and file_len arguments, use them instead
of ioparm. Add locking. Pass either an array of 2 struct stat
or file and file_len pair to find_file0.
(flush_all_units_1, flush_all_units): New functions.
(file_exists): Add file and file_len arguments, use them instead
of ioparm.
* io/unix.h: New file.
* io/lock.c (ioparm, g, ionml): Remove variables.
(library_start): Add cmp argument, adjust for new st_* calling
conventions.
(library_end): Remove.
(free_ionml): New function.
* io/inquire.c (inquire_via_unit, inquire_via_filename,
st_inquire): Add iqp argument, adjust for new st_* calling
conventions and internal function API changes.
* io/format.c (FARRAY_SIZE): Decrease to 64.
(fnode_array, format_data): New typedefs.
(avail, array, format_string, string, error, saved_token, value,
format_string_len, reversion_ok, saved_format): Remove variables.
(colon_node): Add const.
(free_fnode, free_fnodes): Remove.
(free_format_data): New function.
(next_char, unget_char, get_fnode, format_lex, parse_format_list,
format_error, parse_format, revert, unget_format, next_test): Add
fmt or dtp arguments, pass it all around, adjust for internal
function API changes and adjust for removal of global variables.
(next_format): Likewise. Constify return type.
(next_format0): Constify return type.
* io/transfer.c (current_unit, sf_seen_eor, eor_condition, max_pos,
skips, pending_spaces, scratch, line_buffer, advance_status,
transfer): Remove variables.
(transfer_integer, transfer_real, transfer_logical,
transfer_character, transfer_complex, transfer_array, current_mode,
read_sf, read_block, read_block_direct, write_block,
write_block_direct, unformatted_read, unformatted_write,
type_name, write_constant_string, require_type,
formatted_transfer_scalar, us_read, us_write, pre_position,
data_transfer_init, next_record_r, next_record_w, next_record,
finalize_transfer, iolength_transfer, iolength_transfer_init,
st_iolength, st_iolength_done, st_read, st_read_done, st_write,
st_write_done, st_set_nml_var, st_set_nml_var_dim,
next_array_record): Add dtp argument, pass it all around, adjust for
internal function API changes and removal of global variables.
* io/list_read.c (repeat_count, saved_length, saved_used,
input_complete, at_eol, comma_flag, last_char, saved_string,
saved_type, namelist_mode, nml_read_error, value, parse_err_msg,
nml_err_msg, prev_nl): Remove variables.
(push_char, free_saved, next_char, unget_char, eat_spaces,
eat_separator, finish_separator, nml_bad_return, convert_integer,
parse_repeat, read_logical, read_integer, read_character,
parse_real, read_complex, read_real, check_type,
list_formatted_read_scalar, list_formatted_read, finish_list_read,
find_nml_node, nml_untouch_nodes, nml_match_name, nml_query,
namelist_read): Add dtp argument, pass it all around, adjust for
internal function API changes and removal of global variables.
(nml_parse_qualifier): Likewise. Add parse_err_msg argument.
(nml_read_obj): Likewise. Add pprev_nl, nml_err_msg, clow and
chigh arguments.
(nml_get_obj_data): Likewise. Add pprev_nl and nml_err_msg
arguments.
(init_at_eol): Removed.
* io/read.c (convert_real, read_l, read_a, next_char, read_decimal,
read_radix, read_f, read_x): Add dtp argument, pass it all around,
adjust for internal function API changes and removal of global
variables.
(set_integer): Adjust internal_error caller.
* io/write.c (no_leading_blank, nml_delim): Remove variables.
(write_a, calculate_sign, calculate_G_format, output_float,
write_l, write_float, write_int, write_decimal, write_i, write_b,
write_o, write_z, write_d, write_e, write_f, write_en, write_es,
write_x, write_char, write_logical, write_integer, write_character,
write_real, write_complex, write_separator,
list_formatted_write_scalar, list_formatted_write, nml_write_obj,
namelist_write): Add dtp argument, pass it all around, adjust for
internal function API changes and removal of global variables.
(extract_int, extract_uint, extract_real): Adjust internal_error
callers.
* runtime/fpu.c (_GNU_SOURCE): Don't define here.
* runtime/error.c: Include ../io/unix.h.
(filename, line): Remove variables.
(st_printf): Pass address of a local variable to init_error_stream.
(show_locus): Add cmp argument. Use fields it points to rather than
filename and line variables.
(os_error, runtime_error): Remove show_locus calls.
(internal_error): Add cmp argument. Pass it down to show_locus.
(generate_error): Likewise. Use flags bitmask instead of non-NULL
check for iostat and iomsg parameter presence, adjust for st_*
calling convention changes.
* runtime/stop.c (stop_numeric, stop_string): Remove show_locus
calls.
* runtime/pause.c (pause_numeric, pause_string): Likewise.
* runtime/string.c: Include ../io/io.h.
(find_option): Add cmp argument. Pass it down to generate_error.
* intrinsics/flush.c (recursive_flush): Remove.
(flush_i4, flush_i8): Use flush_all_units. Add unlock_unit
call.
* intrinsics/rand.c: Include ../io/io.h.
(rand_seed_lock): New variable.
(srand, irand): Add locking.
(init): New constructor function.
* intrinsics/random.c: Include ../io/io.h.
(random_lock): New variable.
(random_r4, random_r8, arandom_r4, arandom_r8): Add locking.
(random_seed): Likewise. open failed if fd < 0. Set i correctly.
(init): New constructor function.
* intrinsics/system_clock.c (tp0, t0): Remove.
(system_clock_4, system_clock_8): Don't subtract tp0/t0 from current
time, use just integer arithmetics.
* intrinsics/tty.c (isatty_l4, isatty_l8, ttynam_sub): Add
unlock_unit calls.
From-SVN: r107328
PR fortran/24892
* io/io.h (unit_access): Add ACCESS_APPEND.
* io/open.c (access_opt): Add APPEND value for ACCESS keyword.
(st_open): Use that new value to set the POSITION accordingly.
* gfortran.dg/open_access_append_1.f90: New test.
* gfortran.dg/open_access_append_2.f90: New test.
From-SVN: r107119
2005-10-24 Jerry DeLisle <jvdelisle@verizon.net>
PR libgfortran/24224
* libgfortran.h: Remove array stride error code.
* runtime/error.c: Remove array stride error.
* io/io.h: Change name of 'nml_loop_spec' to 'array_loop_spec' to be
generic. Add pointer to array_loop_spec and rank to gfc_unit
structure.
* io/list_read.c: Revise nml_loop_spec references to array_loop_spec.
* io/transfer.c (init_loop_spec): New function to initialize
an array_loop_spec.
(next_array_record): New function to return the index to the next array
record by incrementing through the array_loop_spec.
(next_record_r): Use new function.
(next_record_w): Use new function.
(finalize_transfer): Free memory allocated for array_loop_spec.
* io/unit.c (get_array_unit_len): Delete this function. Use new
function init_loop_spec to initialize the array_loop_spec.
From-SVN: r105878
2005-10-24 Paul Thomas <pault@gcc.gnu.org>
PR fortran/24416
* libgfortran/io/list_read.c (namelist_read): Exit with call to
free_saved () so that character strings do not accumulate.
2005-10-24 Paul Thomas <pault@gcc.gnu.org>
PR fortran/24416
gfortran.dg/namelist_char_only.f90: New test.
From-SVN: r105862
2005-10-23 Jerry DeLisle <jvdelisle@verizon.net>
PR libgfortran/24489
* io/transfer.c (read_block): Change the order of execution to not read
past end-of-record.
(read_block_direct): Same change.
From-SVN: r105840
PR libfortran/23272
* acinclude.m4 (LIBGFOR_CHECK_WORKING_STAT): New check.
* configure.ac: Use LIBGFOR_CHECK_WORKING_STAT.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.h.in: Regenerate.
* configure: Regenerate.
* io/unix.c (compare_file_filename): Add fallback case for
systems without working stat.
* io/open.c (already_open): Correct call to
compare_file_filename.
* io/io.h: Correct proto for compare_file_filename.
From-SVN: r105824
2005-10-13 Thomas Koenig <Thomas.Koenig@online.de>
* io/unix.c(fd_alloc_r_at): Use read() instead of do_read()
only in case of special files (e.g. terminals).
From-SVN: r105373
2005-10-12 Janne Blomqvist <jblomqvi@cc.hut.fi>
* io/unix.c: Remove parts of patch of 2005/10/07 that cause
input from the terminal to hang.
From-SVN: r105324
2005-10-07 Janne Blomqvist <jblomqvi@cc.hut.fi>
PR fortran/16339
PR fortran/23363
* io/io.h: Add read and write members to stream, define access
macros.
* io/transfer.c (read_block_direct): New function.
(write_block_direct): New function.
(unformatted_read): Change to use read_block_direct.
(unformatted_write): Change to use write_block_direct.
* io/unix.c: Remove mmap includes and defines.
(writen): Remove.
(readn): Remove.
(reset_stream): New function.
(do_read): New function.
(do_write): New function.
(fd_flush): Change to use do_write() instead of writen().
(fd_alloc_r_at): Change to use do_read().
(fd_seek): Change return type to try, as the prototype. Add check
to avoid syscall overhead if possible.
(fd_read): New function.
(fd_write): New function.
(fd_open): Set pointers for new functions.
(mem_read): New function.
(mem_write): New function.
(open_internal): Set pointers for new functions.
(is_seekable): Clean up comment.
From-SVN: r105101
