2007-03-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/file_position (st_rewind): Fix comments. Remove use of
test_endfile. Don't seek if already at 0 position. Use new is_special
function to set endfile state.
* io/open.c (test_endfile): Delete this function.
* io/io.h: Delete prototype for test_endfile. Add prototype
for is_special.
* io/unix.c (is_special): New function. Fix whitespace.
* io/transfer.c (next_record_r): Remove use of test_endfile.
From-SVN: r123038
2007-03-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31051
* io/transfer.c (formatted_transfer_scalar): Adjust position for pending
spaces when in writing mode. Clean up some formatting.
From-SVN: r122940
2007-03-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31099
* io/open.c (new_unit): Initialize bytes_left and recl_subrecord.
* io/transfer.c (next_record_w): Set bytes left to record length for
sequential unformatted I/O.
(next_record_r): Ditto.
(read_block_direct): Fix test for exceeding bytes_left.
From-SVN: r122763
2007-02-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30910
* io/write.c (output_float): Add condition of format F only for
special case rounding with zero precision.
From-SVN: r122250
2007-02-19 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30533
PR libfortran/30765
* Makefile.am: Add $(srcdir) too all files in generated/.
(i_maxloc0_c): Add maxloc0_4_i1.c, maxloc0_8_i1.c,
maxloc0_16_i1.c, maxloc0_4_i2.c, maxloc0_8_i2.c and
maxloc0_16_i2.c.
(i_maxloc1_c): Add maxloc1_4_i1.c, maxloc1_8_i1.c,
maxloc1_16_i1.c, maxloc1_4_i2.c, maxloc1_8_i2.c and
maxloc1_16_i2.c.
(i_maxval_c): Add maxval_i1.c and maxval_i2.c.
(i_minloc0_c): Add minloc0_4_i1.c, minloc0_8_i1.c,
minloc0_16_i1.c, minloc0_4_i2.c, minloc0_8_i2.c and
minloc0_16_i2.c.
(i_minloc_1.c): Add minloc1_4_i1.c, minloc1_8_i1.c,
minloc1_16_i1.c, minloc1_4_i2.c, minloc1_8_i2.c and
minloc1_16_i2.c.
(i_minval_c): Add minval_i1.c and minval_i2.c.
(i_sum_c): Add sum_i1.c and sum_i2.c.
(i_product_c): Add product_i1.c and product_i2.c.
(i_matmul_c): Add matmul_i1.c and matmul_i2.c.
(gfor_built_specific_src): Remove $(srcdir) from target.
(gfor_bulit_specific2_src): Likewise.
Makefile.in: Regenerated.
libgfortran.h: Add GFC_INTEGER_1_HUGE and GFC_INTEGER_2_HUGE.
Add gfc_array_i1 and gfc_array_i2.
* generated/matmul_i1.c: New file.
* generated/matmul_i2.c: New file.
* generated/maxloc0_16_i1.c: New file.
* generated/maxloc0_16_i2.c: New file.
* generated/maxloc0_4_i1.c: New file.
* generated/maxloc0_4_i2.c: New file.
* generated/maxloc0_8_i1.c: New file.
* generated/maxloc0_8_i2.c: New file.
* generated/maxloc1_16_i1.c: New file.
* generated/maxloc1_16_i2.c: New file.
* generated/maxloc1_4_i1.c: New file.
* generated/maxloc1_4_i2.c: New file.
* generated/maxloc1_8_i1.c: New file.
* generated/maxloc1_8_i2.c: New file.
* generated/maxval_i1.c: New file.
* generated/maxval_i2.c: New file.
* generated/minloc0_16_i1.c: New file.
* generated/minloc0_16_i2.c: New file.
* generated/minloc0_4_i1.c: New file.
* generated/minloc0_4_i2.c: New file.
* generated/minloc0_8_i1.c: New file.
* generated/minloc0_8_i2.c: New file.
* generated/minloc1_16_i1.c: New file.
* generated/minloc1_16_i2.c: New file.
* generated/minloc1_4_i1.c: New file.
* generated/minloc1_4_i2.c: New file.
* generated/minloc1_8_i1.c: New file.
* generated/minloc1_8_i2.c: New file.
* generated/minval_i1.c: New file.
* generated/minval_i2.c: New file.
* generated/product_i1.c: New file.
* generated/product_i2.c: New file.
* generated/sum_i1.c: New file.
* generated/sum_i2.c: New file.
2007-02-19 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30533
* fortran/iresolve.c(gfc_resolve_maxloc): Remove coercion of
argument to default integer.
(gfc_resolve_minloc): Likewise.
2007-02-19 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30533
* gfortran.dg/intrinsic_intkinds_1.f90: New test.
From-SVN: r122137
PR fortran/30611
* trans-intrinsic.c (gfc_conv_intrinsic_repeat): Evaluate
arguments only once. Generate check that NCOPIES argument is not
negative.
* intrinsics/string_intrinsics.c (string_repeat): Don't check
if ncopies is negative.
* gcc/testsuite/gfortran.dg/repeat_1.f90: New test.
From-SVN: r121581
PR libfortran/30007
* libgfortran.h: Do not prefix symbol name with
__USER_LABEL_PREFIX__ when used in __attribute__((__alias__(...))).
From-SVN: r121569
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* trans-expr.c (gfc_conv_aliased_arg): Remove static attribute
from function and make sure that substring lengths are
translated.
(is_aliased_array): Remove static attribute.
* trans.c : Add prototypes for gfc_conv_aliased_arg and
is_aliased_array.
* trans-io.c (set_internal_unit): Add the post block to the
arguments of the function. Use is_aliased_array to check if
temporary is needed; if so call gfc_conv_aliased_arg.
(build_dt): Pass the post block to set_internal_unit and
add to the block after all io activiy is done.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* io/transfer.c (init_loop_spec, next_array_record): Change to
lbound rather than unity base.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
* gfortran.dg/arrayio_11.f90.f90: New test.
PR fortran/30626
* gfortran.dg/arrayio_12.f90.f90: New test.
From-SVN: r121500
2007-01-21 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30525
* intrinsics/string_intrinsics.c(compare_string): Make
sure that comparisons are done unsigned.
2007-01-21 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30525
* gfortran.dg/char_comparison_1.f: New test.
From-SVN: r121035
2006-12-09 Tobias Burnus <burnus@net-b.de>
PR libfortran/30015
* intrinsics/date_and_time.c (date_and_time): Fix case where time
can go backwards.
* configure.ac: Remove AC_TRY_RUN test for timezone in
gettimeofday.
* acinclude.m4: Ditto.
* configure: Regenerate.
* config.h.in: Regenerate.
From-SVN: r121033
PR libfortran/26893
* acinclude.m4 (LIBGFOR_WORKING_GFORTRAN): New check.
* configure.ac: Add call to LIBGFOR_WORKING_GFORTRAN.
* configure: Regenerate.
* config.h.in: Regenerate because it was forgottent in the last
commit.
Co-Authored-By: Tobias Burnus <burnus@net-b.de>
From-SVN: r120949
2007-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30162
* io/unix.c (fd_flush): Don't seek if file is not seekable, defined as
s->file_length == -1.
(fd_alloc_w_at): Do not adjust file_length if file is not seekable.
(fd_seek): If not seekable, just return success.
(fd_truncate): If not seekable, no need to truncate. Return failure if
seek fails and the stream is not a pipe.
(fd_to_stream): Make test for non-seekable file more robust.
From-SVN: r120512
2006-12-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30014
*io/io.h (st_parameter_dt): Change *size and *iolength type to
GFC_IO_INT.
*io/transfer.c (finalize_transfer): Cast dtp->u.p.size_used to
GFC_IO_INT. (iolength_transfer): Cast size * nelems to GFC_IO_INT.
From-SVN: r120234
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* gfortran.dg/read_eof_4.f90: Add tests.
* gfortran.dg/readwrite_unf_direct_eor_1.f90: New test.
* gfortran.dg/unf_read_corrupted_1.f90: New test.
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* libgfortran.h: Add ERROR_CORRUPT_FILE to error_codes.
* runtime/error.c (translate_error): Add handling for
ERROR_CORRUPT_FILE.
* io/transfer.c (read_block_direct): Add comment about
EOR for stream files.
Remove test for no bytes left for direct access files.
Generate an ERROR_SHORT_RECORD if the read was short.
For unformatted sequential files: Check endfile condition.
Remove test for no bytes left. End of file here means
that the file structure has been corrupted. Pre-position
the file for the next record in case of error.
(write_buf): Whitespace fix. Subtract the number of bytes
written from bytes_left.
From-SVN: r119592
2006-12-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/30005
* io/open.c: Add errno.h include.
(new_unit): Add new error messages with file name for file open.
From-SVN: r119530
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.dg/convert_implied_open.f90: Change to
new default record length.
* gfortran.dg/unf_short_record_1.f90: Adapt to
new error message.
* gfortran.dg/unformatted_subrecords_1.f90: New test.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.h (gfc_option_t): Add max_subrecord_length.
(top level): Define MAX_SUBRECORD_LENGTH.
* lang.opt: Add option -fmax-subrecord-length=.
* trans-decl.c: Add new function set_max_subrecord_length.
(gfc_generate_function_code): If we are within the main
program and max_subrecord_length has been set, call
set_max_subrecord_length.
* options.c (gfc_init_options): Add defaults for
max_subrecord_lenght, convert and record_marker.
(gfc_handle_option): Add handling for
-fmax_subrecord_length.
* invoke.texi: Document the new default for
-frecord-marker=<n>.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* libgfortran/libgfortran.h (compile_options_t): Add
record_marker. (top level): Define GFC_MAX_SUBRECORD_LENGTH.
* runtime/compile_options.c (set_record_marker): Change
default to four-byte record marker.
(set_max_subrecord_length): New function.
* runtime/error.c (translate_error): Change error message
for short record on unformatted read.
* io/io.h (gfc_unit): Add recl_subrecord, bytes_left_subrecord
and continued.
* io/file_pos.c (unformatted_backspace): Change default of record
marker size to four bytes. Loop over subrecords.
* io/open.c: Default recl is max_offset. If
compile_options.max_subrecord_length has been set, set set
u->recl_subrecord to its value, to the maximum value otherwise.
* io/transfer.c (top level): Add prototypes for us_read, us_write,
next_record_r_unf and next_record_w_unf.
(read_block_direct): Separate codepaths for unformatted direct
and unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(write_buf): Separate codepaths for unformatted direct and
unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(us_read): Add parameter continued (to indicate that bytes_left
should not be intialized). Change default of record marker size
to four bytes. Use subrecord. If the subrecord length is smaller than
zero, this indicates a continuation.
(us_write): Add parameter continued (to indicate that the continued
flag should be set). Use subrecord.
(pre_position): Use 0 for continued on us_write and us_read calls.
(skip_record): New function.
(next_record_r_unf): New function.
(next_record_r): Use next_record_r_unf.
(write_us_marker): Default size for record markers is four bytes.
(next_record_w_unf): New function.
(next_record_w): Use next_record_w_unf.
From-SVN: r119412
2006-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/io.h (unit_flags): Add new flag has_recl.
* io.open.c (new_unit): Set flag if RECL= was specified.
* io/transfer.c (us_write): If flag set, leave recl as initialized by
new_unit.
From-SVN: r119087
* trans-decl.c (gfc_get_symbol_decl): Fix formatting.
* io/open.c (new_unit): Format %d expects an int variable.
* runtime/error.c (show_locus): Format %d expects an int variable.
From-SVN: r118887
