As mentioned in the PR, building gcc with jit enabled and
--enable-host-shared doesn't work on NetBSD/i?86, as libgccjit.so.0
has text relocations.
The r0-125846-g459260ecf8b420b029601a664cdb21c185268ecb changes
added --enable-host-shared support to various libraries, but didn't
add it to intl/ subdirectory; on Linux it isn't really needed, because
all: all-no
all-no: #nothing
but on other OSes intl/libintl.a is built.
The following patch makes sure it is built with -fPIC when
--enable-host-shared is used.
2021-04-16 Jakub Jelinek <jakub@redhat.com>
PR jit/100096
* configure.ac: Add --enable-host-shared support.
* Makefile.in: Update copyright. Add @PICFLAG@ to CFLAGS.
* configure: Regenerated.
As Iain reported, my change broke the case when one has bison >= 3,
but make decides there is no reason to regenerate plural.c, unfortunately
that seems to be a scenario I haven't tested. The problem is that
the pregenerated plural.c has been generated with bison 1.35, but when
config.h says HAVE_BISON3, the code assumes it is the bison3 variant.
What used to work fine is when one has bison >= 3 and plural.c has been
regenerated (e.g. do touch intl/plural.y and it will work), or when
one doesn't have any bison (then nothing is regenerated, but HAVE_BISON3
isn't defined either), or when one has bison < 3 and doesn't need to
regenerate, or when one has bison < 3 and it is regenerated.
The following patch fixes this, by killing the HAVE_BISON3 macro from
config.h, and instead remembering the fact whether plural.c has been created
with bison < 3 or bison >= 3 in a separate new plural-config.h header.
The way this works:
- user doesn't have bison
- user has bison >= 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y
- user has bison < 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y
pregenerated !USE_BISON3 plural.c and plural-config.h from source
dir is used, nothing in the objdir
- user has bison >= 3 and intl/plural.y is newer
Makefile generates plural.c and USE_BISON3 plural-config.h in the
objdir, which is then used in preference to srcdir copies
- user has bison < 3 and intl/plural.y is newer
Makefile generates plural.c and !USE_BISON3 plural-config.h in the
objdir, which is then used in preference to srcdir copies
I have tested all these cases and make all-yes worked in all the cases.
If one uses the unsupported ./configure where srcdir == objdir, I guess
(though haven't tested) that it should still work, just it would be nice
if such people didn't try to check in the plural{.c,-config.h} they have
regenerated.
What doesn't work, but didn't work before either (just tested gcc-9 branch
too) is when one doesn't have bison and plural.y is newer than plural.c.
Don't do that ;)
2020-04-16 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/92008
intl/
* configure.ac: Remove HAVE_BISON3 AC_DEFINE.
* Makefile.in (HEADERS): Add plural-config.h.
(.y.c): Also create plural-config.h.
(dcigettext.o loadmsgcat.o plural.o plural-exp.o): Also depend
on plural-config.h.
(plural-config.h): Depend on plural.c.
* plural-exp.h: Include plural-config.h. Use USE_BISON3 instead
of HAVE_BISON3.
* plural.y: Use USE_BISON3 instead of HAVE_BISON3.
* configure: Regenerated.
* plural.c: Regenerated.
* config.h.in: Regenerated.
* plural-config.h: Generated.
contrib/
* gcc_update: Add intl/plural.y dependency for intl/plural-config.h.
bison 3 apparently made a backwards incompatible change, dropped
YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param
and %parse-param. Furthermore, there is no easy way to conditionalize
on bison version in the *.y files.
While e.g. glibc bumped bison requirement and just has the bison 3
compatible version, Richi said there are still systems with older bison
where we want to build gcc.
So, this patch instead determines during configure bison version, and
depending on that when building plural.c (if building it at all) tweaks
what is passed over to bison if needed.
Tested with both bison 3 and bison 1.35, in each case with reconfiguring
intl and building with make all-yes (as in my setup intl isn't normally
used).
2020-04-16 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/92008
* configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3
and AC_SUBST BISON3_YES and BISON3_NO.
* Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@,
add @BISON3_YES@ prefixed rule to adjust the *.y source using sed
and adjust output afterwards.
* plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use
struct parse_args * type for arg instead of void *.
* plural.y: Add magic /* BISON3 ... */ comments with bison >= 3
directives.
(YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined.
(yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3
is defined.
* plural.c: Regenerated.
* config.h.in: Regenerated.
* configure: Regenerated.
This commit:
commit e7c26e04b2 (tjteru/master)
Date: Wed Jan 22 14:54:26 2020 +0000
gcc: Add new configure options to allow static libraries to be selected
contains a couple of issues. First I failed to correctly regenerate
all of the configure files it should have done. Second, there was a
mistake in lib-link.m4, one of the conditions didn't use pure sh
syntax, I wrote this:
if x$lib_type = xauto || x$lib_type = xshared; then
When I should have written this:
if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
These issues were raised on the mailing list in these messages:
https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01827.htmlhttps://gcc.gnu.org/ml/gcc-patches/2020-01/msg01921.html
config/ChangeLog:
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
gcc/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libcpp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
gcc currently uses ngettext in a number of places (gcc/cp/pt.c,
gcc/diagnostic.c, gcc/collect2.c). Apparently there are (or used to
be) gettext implementations that lack ngettext. See config/gettext.m4.
This patch arranges for intl/ to be compiled when the system gettext
lacks ngettext.
* configure.ac: Invoke AM_GNU_GETTEXT with need_ngettext.
* configure: Regenerate.
From-SVN: r254486
fixincludes/
* Makefile.in (AUTOCONF, AUTOHEADER, ACLOCAL, ACLOCAL_AMFLAGS):
New variables.
($(srcdir)/configure, $(srcdir)/config.h.in, $(srcdir)/aclocal.m4):
Use them.
gcc/
* Makefile.in (AUTOCONF, ACLOCAL, ACLOCAL_AMFLAGS, aclocal_deps):
New variables.
($(srcdir)/configure, $(srcdir)/aclocal.m4): New rules.
(AUTOHEADER): New variable.
($(srcdir)/cstamp-h.in): Use it.
gnattools/
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure): Use them.
libada/
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure)): Use them. Also depend on multi.m4.
libgcc/
* configure.ac: Add snippet for maintainer-mode.
* configure: Regenerate.
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure)): New rule, active only with maintainer
mode turned on.
libiberty/
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure): New rule, active only in maintainer mode.
libobjc/
* Makefile.in (AUTOCONF, ACLOCAL, ACLOCAL_AMFLAGS, aclocal_deps):
New variables.
($(srcdir)/configure, $(srcdir)/aclocal.m4): New rules.
intl/
* Makefile.in (aclocal_deps): New variable.
($(srcdir)/aclocal.m4): Use it, for portable makefile syntax.
libdecnumber/
* Makefile.in (aclocal_deps): New variable.
($(srcdir)/aclocal.m4): Use it, for portable makefile syntax.
From-SVN: r150277
PR other/23541
PR other/26507
Backport from gettext repository:
2003-09-04 Bruno Haible <bruno@clisp.org>
* dgettext.c: Include <locale.h> after gettextP.h, not before. This
ensures that libintl_dcgettext is correctly declared on Solaris.
(Needed because Solaris <locale.h> includes libintl.h.)
* dngettext.c: Likewise, for the libintl_dcngettext declaration.
From-SVN: r116931
2005-05-23 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add info dvi ps pdf html install-html to .PHONY
Add install-html target.
From-SVN: r114034
gcc/ChangeLog:
2004-04-25 Paolo Bonzini <bonzini@gnu.org>
* Makefile.in (top_builddir): Define to .
intl/ChangeLog:
2004-04-25 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Point config.intl to the parent directory of
${top_builddir}.
* configure: Regenerate.
From-SVN: r82259
top:
* Makefile.tpl (configure-gcc): Depend on maybe-configure-intl.
* Makefile.in: Regenerate.
config:
* gettext.m4: Delete all former contents.
(ZW_GNU_GETTEXT_SISTER_DIR): New macro.
* progtest.m4: New file.
gcc:
* Makefile.in (top_builddir): Set to "..", not ".".
(INTLLIBS, INTLDEPS): Delete.
(LIBINTL, LIBINTL_DEP, LIBICONV_DEP): New variables to be substituted.
(LIBDEPS): Add $(LIBICONV_DEP).
(LIBS): Take out $(INTLLIBS), add $(LIBINTL) and $(LIBICONV).
(INCLUDES): Replace -I../intl with @INCINTL@.
($(top_builddir)/intl/libintl.a): Delete rule.
(stage2-start, stage3-start, stage4-start, stageprofile-start,
stagefeedback-start): Use $$ for variable to be evaluated by
shell, not make.
* acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_GETTEXT,
HAVE_LC_MESSAGES, HAVE_STPCPY): Delete.
* aclocal.m4: sinclude ../config/progtest.m4. Add
contents of lcmessage.m4 from gettext distro.
* configure.in: Check for wchar.h and setlocale. Set
LIBICONV_DEP to the empty string and substitute it.
Call AM_LC_MESSAGES. Delete AC_ARG_ENABLE for --enable-nls;
this is handled elsewhere. Use ZW_GNU_GETTEXT_SISTER_DIR,
not CY_GNU_GETTEXT. Clear $LIBICONV if its text is included
in $LIBINTL, to avoid linking it twice.
* configure, config.in: Regenerate.
intl:
* README: Update.
* Makefile.in (INSTALL, INSTALL_DATA, MKINSTALLDIRS,
mkinstalldirs, gettextsrcdir, l): Delete.
(COMPILE): Add $(DEFS-$@), remove $(XCFLAGS).
(HEADERS): libgnuintl.h not libgnuintl.h.in. Remove os2compat.h.
(SOURCES): Remove os2compat.c.
(DEFS-dcigettext.o, DEFS-localealias.o, DEFS-localcharset.o,
DEFS-relocatable.o): New.
(all-yes): Add config.intl.
(libintl.h): Use cp, not cat.
(INCLUDES): Remove -I..
(TAGS, CTAGS, ID): Word wrap.
(mostlyclean, distclean): Remove junk.
(config.intl): New rule.
* aclocal.m4: sinclude ../config/progtest.m4 instead of
including it inline.
* config.intl.in: New file.
* configure.in: Take out unnecessary AC_CONFIG_AUX_DIR.
Take out AC_DEFINEs for LOCALEDIR, LOCALE_ALIAS_PATH,
LIBDIR, INSTALLDIR. Set LIBINTL_DEP and INCINTL and AC_SUBST
them. Add config.intl to AC_OUTPUT.
* os2compat.c, os2compat.h: Delete, unused.
From-SVN: r69071
top:
* intl: New directory; see intl/ChangeLog for details.
* ABOUT-NLS, config.rpath: Import from gettext 0.12.1.
* Makefile.tpl: all-gcc depends on maybe-all-intl.
* Makefile.in: Regenerate.
config:
* gettext.m4: New file - copy of gettext.m4 from binutils
CVS, with added AC_ISC_POSIX macro from gcc/aclocal.m4.
gcc:
* ABOUT-NLS: Delete.
* intl: Delete entire directory.
* aclocal.m4: Include ../config/gettext.m4. Delete
AC_ISC_POSIX, AM_LANGINFO_CODESET, jm_GLIBC21, AM_LC_MESSAGES,
AM_PATH_PROG_WITH_TEST, AM_WITH_NLS, and AM_GNU_GETTEXT.
* configure.in: Use CY_GNU_GETTEXT, not AM_GNU_GETTEXT.
Remove intl/Makefile from all_outputs.
* configure, config.in: Regenerate.
* Makefile.in: Expunge all references to intl subdirectory.
Add -I../intl to INCLUDES.
* intl.h: Include libintl.h if and only if ENABLE_NLS is defined.
intl:
* Makefile.in: Remove unnecessary capabilities for
installation, build of shared libraries, generation of
distribution tarballs, etc. Fix all the places that rely on
the parent directory. Don't generate libgnuintl.h from
anything; do generate $(objdir)/libintl.h from libgnuintl.h if
necessary. Adjust DEFS for use of config.h.
* libgnuintl.h.in: Rename libgnuintl.h.
* README: New file.
* config.charset, ref-add.sin, ref-del.sin: Delete (unused).
* COPYING.LIB-2.0, COPYING.LIB-2.1: Delete (redundant).
* aclocal.m4: New; generated per instructions in gettext manual.
* configure.in: New; written from scratch for this configuration.
* configure, config.h.in: Generated.
contrib:
* gcc_update: Remove gcc/intl/plural.c from list.
Add new generated files intl/plural.c, intl/configure,
intl/config.h.in.
From-SVN: r68928
GCC Administrator